Rock Fabric Research Articles

ECOMAN: an open-source package for geodynamic and seismological modelling of mechanical anisotropy

Abstract. Mechanical anisotropy related to rock fabrics is a proxy for constraining the Earth's deformation patterns. However, the forward and inverse modelling of mechanical anisotropy in 3D large-scale domains has been traditionally hampered by the intensive computational cost and the lack of a dedicated, open-source computational framework. Here we introduce ECOMAN (Exploring the COnsequences of Mechanical ANisotropy), a software package for modelling strain- and stress-induced rock fabrics and testing the effects of the resulting elastic and viscous anisotropy on seismic imaging and mantle convection patterns. Differently from existing analogous software, ECOMAN can model strain-induced fabrics across all mantle levels and is optimised to run efficiently on multiple CPUs. It also enables modelling of shape preferred orientation (SPO)-related structures that can be superimposed over lattice/crystallographic preferred orientation (LPO/CPO) fabrics, which allows the consideration of the mechanical effects of fluid-filled cracks, foliated and lineated grain-scale fabrics, and rock-scale layering. One of the most important innovations is the Platform for Seismic Imaging (PSI), a set of programs for performing forward and inverse seismic modelling in isotropic–anisotropic media using real or synthetic seismic datasets. The anisotropic inversion strategy is capable of recovering parameters describing a tilted transversely isotropic (TTI) medium, which is required to reconstruct 3D structures and mantle strain patterns and to validate geodynamic models.

Dating syn-orogenic exhumation of subducted continental crust: The case of the Northern Apennines

Dating deformation is key to unravel the evolution of orogens. Unfortunately, this is commonly challenged by the occurrence in the rock record of multiple overprinting deformation stages that lead to repeated blastesis and form multiple fabrics during both prograde and retrograde evolutions. Additionally, recrystallization is not always complete, which causes a mixture of inherited and neoblastic mineral phases. Therefore, an approach integrating age dating with microstructural and petrographic analyses is necessary to extract structurally constrained ages from the rock record. We used this approach to contribute to the long-lasting debate about exhumation of continental metamorphic units subducted to high-pressure conditions. We studied continental metasedimentary sequences of the Tuscan Metamorphic Units of the Northern Apennines (Italy) from two localities: the Island of Giglio to the west and the Monticiano-Roccastrada Unit to the east. We obtained two analytically distinct 40Ar/39Ar age ranges: an older 21–16 Ma age cluster is related to syn-orogenic top-to-the E contractional deformation occurring at ca. 1 GPa and 350 °C. A younger 15–11 Ma age group is related, instead, to exhumation to shallower structural levels and retrogression of these units to greenschist facies conditions. The interpretation of the results is based on white mica chemical compositions and rock fabrics. By integrating our results with published literature, we conclude that the investigated high-pressure continental metasedimentary sequences experienced early syn-orogenic exhumation from blueschist to greenschist facies conditions predominantly by a combination of extrusion and out- and in-sequence thrusting, with only minor contributions by extensional shearing during regional crustal thinning. Therefore, this study highlights the role of contractional fabrics in accommodating significant exhumation amounts of deeply subducted continental rocks.

Rock Typing and Flow Unit Identification in the Upper Cretaceous Carbonate Reservoirs in Jambur Oil Field

The effectiveness of dynamic models in field development and predicting future reservoir performance depends on the accuracy and reliability of geological models. These models are constructed based on an accurate categorization of reservoir rock types and the identification of flow units. understanding the geological structure, lithological characteristics, and depositional processes is crucial in differentiating rock types and determining flow units within strata. This study focuses on identifying rock types and flow units within the upper Cretaceous reservoir/Qamchuqa formation of the Jambur oilfield. By employing four petrophysical techniques across six wells, it was determined that the Rock Fabric Number technique and the Winland porosity-permeability relation were insufficient for accurately estimating permeability, primarily due to constraints in regression analysis. The classification of flow zone indicators resulted in the identification of five distinct rock classes that offer a more reliable means of assessing permeability in intervals lacking core data. Subsequently, the cluster analysis process sorted the reservoir rock into cohesive groups based on the raw log data and calibrated it with the Flow Zone Indicator (FZI) method. In conclusion, permeability can be determined through equations derived from the FZI method, and the establishment of petrophysical characteristics within a geological model can be achieved by utilizing rock facies derived from cluster analysis.

Propagating image-based rock classes from cored to non-cored depth intervals using supervised machine learning

High-resolution image data is instrumental in quantifying the variation of rock fabric in formation evaluation that conventional well logs fail to capture. However, the acquisition of image data for all wells in a reservoir is restricted due to technology limitations and the high cost involved. The main objective of this paper is to propose a workflow to extrapolate rock fabric information from imaged depth intervals/wells to nearby un-imaged depth intervals/wells for enhanced formation evaluation in un-imaged wells. To propagate rock fabric information, we trained a supervised learning algorithm in a well with core photos, CT-scan images, and conventional well logs. Subsequently, the trained model is used to identify fabric-influenced well-log-based rock classes using only conventional well logs in un-imaged depth intervals/well (referred to as fabric-based rock classes). We applied the proposed workflow to two wells in a siliciclastic formation with spatial variation in rock fabric. Comparison of the detected fabric-based rock classes in the nearby depth intervals/well using the trained model with image-based rock classes resulted in an average accuracy of 94%. The outcomes of this paper contribute to accelerated identification of rock types honouring rock fabric while minimizing extensive imaging and coring efforts. Thematic collection: This article is part of the Digitally enabled geoscience workflows: unlocking the power of our data collection available at: https://www.lyellcollection.org/topic/collections/digitally-enabled-geoscience-workflows

Influence of Rock Fabric on Physical Properties of Shale Oil Reservoir Under Effective Pressure Conditions

Abstract The physical properties of shale oil reservoirs under overburden pressure are of great significance for reservoir prediction and evaluation during exploration and development. Based on core, thin section, and SEM observations, as well as test data such as XRD, TOC, and porosity and permeability under pressure conditions, this study systematically analyzes the variation of physical properties of different lithofacies shales in the Jiyang depression and the influence of rock fabric on the physical variation under pressure. The porosity and permeability of shale samples significantly decrease under pressure. According to the phased reduction in porosity and permeability, the pressurization process is divided into three pressure stages: low pressure (<8 MPa), medium pressure (8–15 MPa), and high pressure (>15 MPa). The reduction of porosity is fastest in the low-pressure stage and slowest in the medium-pressure stage. The reduction of permeability is fastest in the low-pressure stage and the slowest in the high-pressure stage. The rock fabric has a significant impact on porosity and permeability under pressure conditions. The permeability of laminated shale and bedded shale is higher than that of massive shale under pressure, and the permeability loss rate is lower than that of massive shales. Especially under lower pressure, the difference can be 10–20 times. In addition, the reduction rate of porosity and permeability under pressure is negatively correlated with felsic minerals content, which is positively correlated with carbonate minerals content and clay minerals content. The contribution of clay minerals to the porosity reduction rate is dominant, followed by carbonate minerals. The contribution of carbonate minerals to the permeability reduction rate is dominant, followed by clay minerals. The TOC content has no significant impact on the porosity and permeability of shales under pressure in the study due to the low maturity.

Combined effect of rock fabric, in-situ stress, and fluid viscosity on hydraulic fracture propagation in Chang 73 lacustrine shale from the Ordos Basin

Combined effect of rock fabric, in-situ stress, and fluid viscosity on hydraulic fracture propagation in Chang 73 lacustrine shale from the Ordos Basin

Exploring carbonate reservoirs potential, north Egypt

Carbonate reservoirs contain a significant portion of the world's oil reserves. The Middle East is home to many of these reservoirs. Carbonate reservoirs can be found in a few very large oil fields, including Egypt's Zohr field, the largest conventional gas field in Egypt. In this article, we present a couple of successful tertiary carbonate reservoirs that are bearing hydrocarbon in the Egyptian Western Desert and Gulf of Suez provinces, they are distributed across Egypt's subsurface, and they are characterized by heterogeneous porosity and permeability. These heterogeneities are caused by the wide spectrum of tectonostratigraphic environments in which carbonates are deposited and by subsequent diagenetic alteration of the original rock fabric. The structural analysis of the study areas based on the interpretation of both geophysical and geological data, in JD, Abu Sennan, and the North Amer areas in the Western Desert and offshore Gulf of Suez respectively showed that tectonostratigraphic history during tertiary time affected a great extent carbonate reservoir quality. Major fault trends formed secondary fracture porosity possibly allowing hydrothermal solutions to pass through the reservoirs and form secondary vuggy porosity. These characteristics are considered important factors of promising carbonate reservoirs. In this study, several carbonate reservoirs have been outlined. The study workflow helped us better identify carbonate prospects with high fractured density.

Dolomitization of the Lower Part of the Sargelu Formation, Northeastern Iraq

The prominent characteristic of the lower part of the Sargelu Formation of the Middle Jurassic is the occurrence of destructive dolomitization. This dolomitized unit, cropped out in the high folded and Imbricated zones in Northern Iraq, is situated in the Gotnia Basin and has been distinctly identified and are documented in previous studies. Dolomite crystals are euhedral in shape; hence, they are classified as saccharoidal dolomite, resulting in the elimination of all biocontent and the destruction of the original rock fabrics. Despite the abundance of intercrystalline pores in this unit and their role in the quality of reservoirs in the oil fields, the origin or mechanism of dolomitization is not well understood yet. The aim of this investigation is to find out a suitable model for the dolomitization and to propose possible mechanisms that led to the dolomitization. At the top of the Lower Jurassic Sehkaniyan Formation, an extensive mass of destructive dolomitization has also occurred. The dolomitic unit of the Sargelu Formation, which extends for hundred kilometers constantly. Stratigraphic correlation reveals that the Sargelu Formation is juxtaposed with different successions, such as the Alan and Sehkaniyan formations, that show evidence about peritidal and sabkha environments, where the dolomitization units were associated with solution collapse breccia and microbial stromatolite. This study proposes that the reflux and burial dolomitization models for the lower part of the Sargelu Formation by comparing the paleoenvironmental conditions of the late Lower Jurassic and early Middle Jurassic in the Gotnia basin with a modern analogue model.

Structural Architectures of Precambrian Metamorphites in and Around Rongmil –Rongjeng Area, East Garo Hills Districts Meghalaya

The present work elucidates the Precambrian metamorphites in and around Rongmil-Rongjeng area in the light of their polydeformational episodes that witness four pfases of deformation showing multiple interference patterns in the ductlile to brittle fields. Field as well as microstructural study reveals that all the pre existing depositional fabrics have been affected by BD1, the first phase of deformation under progressive metamorphic phase leading to the formation of most dominant, highly penetrative schistose and gneissose fabrics of rocks of amphibolites facies. The second phase of deformation, BD2 forming NW-SE trending up and down facing folds of probable plane non cylindrical nature, was responsible for layer parallel shortening (buckling) of the mechanically active BS0 and BS1 fabrics in the NW-SE longitudinal compressive tectonics. The third phase folds, BF3 refolded the earlier set of folds into non –plane non cylindrical nature and occur as non coaxial, open warp type gently plunging with near vertical axial plane striking NW-SE direction. BD4, the fourth phase deformation is considered as brittle phase and represents the joints, fractures and fault structures.

Paleozoic Decollement Displaced the Surface Trace of Iapetus Ocean Closure in Northern Appalachians

AbstractThe northern Appalachians record accretion of Laurentia‐ and Gondwana‐derived terranes to Laurentian margin during the formation of Pangea. Terrane bounding structures, key to reconstructing this history, are poorly understood at depth. We use teleseismic receiver functions to probe the crust beneath Appalachian terranes in Québec and Maine. We identify an eastward‐dipping intra‐crustal boundary extending beneath the trace of the Iapetus Ocean closure that separates the peri‐Laurentian Dunnage and the peri‐Gondwanan Gander terranes. Systematic fabric in rocks is a likely cause of anisotropic seismic properties associated with it. Depth and position associate this boundary with a previously identified décollement separating authochtonous Laurentian basement from rocks emplaced during Pangea's assembly. Neither the décollement nor the crust‐mantle boundary under our profile change beneath the surface trace of the Iapetus Ocean closure, suggesting that it has been transported to the northwest relative to the actual boundary between mantle lithospheres of former Laurentia and Gondwana.

Focal mechanism of a Late Triassic large magnitude earthquake along the Longmen Shan fault belt, eastern Tibetan Plateau

Stress states near active fault zones are key to understand their seismogenic setting, geodynamic evolution and future seismic activity. The Longmen Shan Fault Belt (LSFB) is a prominent fault zone that has had a long history of activity and major recent earthquakes in the eastern Tibetan Plateau. However, we have no records of major events prior to the 2008 Wenchuan earthquake, and this hinders progress in understanding both the past and future seismicity of the LSFB. A Late Triassic pseudotachylyte, recently discovered and dated, provides an opportunity to compare modern stress states with those acting ca. 230 Ma ago. Here we use a new paleoseismological approach, based on the magnetic fabric of the fault rocks, to determine the focal mechanism of Late Triassic seismic events, each recorded in pseudotachylyte veins at the Bajiaomiao outcrop. The anisotropy of magnetic susceptibility (AMS) of pseudotachylytes and cataclasites arises from the shape-preferred orientation of coseismic neoformed magnetite and monoclinic pyrrhotite, whereas that of protocataclasite arises mainly from the crystallographic preferred orientation of inherited clastic magnetite. The AMS of fault rocks shows well-defined magnetic foliation and lineation. The pseudotachylyte generation vein formed along the plane where seismic slip took place, while the AMS obliquity with respect to this plane indicates seismic slip with ∼248° trend and 38° dip. This result is consistent with the attitude of macroscopically visible subhorizontal striations on the pseudotachylyte plane itself. The consistent asymmetry of multiple injection veins with respect to the pseudotachylyte generation vein, along with the asymmetry of the AMS fabric, shows that seismic deformation resulted from left-lateral, strike-slip motion. This study provides the oldest example, to date, of focal mechanism determination using the AMS method. The kinematics of the Late Triassic event departs from that of the 2008 Wenchuan earthquake thrust motion. Yet, with a displacement estimated between ∼4.4 and 17.4 m, the magnitude of the Late Triassic event was likely Mw 7.5–7.9.

Swiss deep drilling campaign 2019–2022: Geological overview and rock properties with focus on porosity and pore-space architecture

A recently completed deep drilling campaign, comprising 9 deep boreholes penetrating the Mesozoic sedimentary sequence of northern Switzerland, yielded >6 km of drillcore. One of the main objectives was to characterise the low-permeability sequence with the lower Jurassic Opalinus Clay in its centre, motivated by the site selection for a deep geological repository for radioactive waste. In this context, the chemical and isotopic composition of the porewater, as well as the mineralogical and petrophysical properties of the rocks, were among the main study targets. In this paper, the main objective was the characterisation of the lithologically diverse Jurassic rock sequence with focus on mineralogy, porosity and pore-space architecture. Given the large amount of data, a well constrained relationship between clay content (relating to fine-grained sheet-silicate minerals) and porosity could be established. Porosity increases with clay content along a concave curve, but in detail minor formation-specific differences of the positions relative to the best-fit curve were identified. These are attributed to the highly variable deposition rates that resulted in different times available for early diagenesis to alter the rock fabric by mineral dissolution and cementation, thereby affecting the compaction behaviour. Pore-size distributions were obtained from N2 ad-/desorption isotherms. A distinct peak at a radius of 3 nm can be clearly correlated with clay minerals, whereas limestones are dominated by pore sizes in the range of 40–100 nm, and marls show intermediate distributions. A conceptual framework is proposed distinguishing a nanometric porosity that is proportional to the clay content and a contribution of larger pores that are related to the geometric incompatibility between platy clay minerals and isometric calcite or quartz. The contribution of these larger pore is thought to explain the curvature of the clay content-porosity relationship and the more limited compaction of the clay in pressure shadows adjacent to the larger grains. A number of outliers towards high porosity at a given clay content were identified in oolites (most strongly in Fe-rich oolites), sandstones and a unit containing coral-reef material. All these units have in common the presence of competent calcite or quartz grains at the time of deposition, leading to grain-supported fabrics and therefore to a more limited compaction in the interstitial pore space.

Devonian–Carboniferous extension and Eurekan inversion along an inherited WNW–ESE-striking fault system in Billefjorden, Svalbard

Background The Billefjorden area in central Spitsbergen hosts thick Lower–lowermost Upper Devonian, late–post-Caledonian collapse deposits presumably deformed during the Late Devonian Svalbardian Orogeny. These rocks are juxtaposed against Proterozoic basement rocks along the Billefjorden Fault Zone and are overlain by uppermost Devonian–early Permian deposits of the Billefjorden Trough, a N–S-trending Carboniferous rift basin bounded by the Billefjorden Fault Zone. Methods We interpreted seismic reflection (also depth-converted), bathymetric, and exploration well data. Results The data show abundant Early Devonian, WNW–ESE-striking (oblique-slip) normal faults segmenting the Billefjorden Trough, and a gradual decrease in tectonic activity from the Early Devonian (collapse phase) to early Permian (post-rift phase). Early Devonian–Middle Pennsylvanian WNW–ESE-striking faults were mildly reactivated and overprinted and accommodated strain partitioning and decoupling in the early Cenozoic. This resulted in intense deformation of Lower Devonian sedimentary rocks and in the formation of bedding-parallel décollements, e.g., between the Lower Devonian Wood Bay and the uppermost Pennsylvanian–lowermost Permian Wordiekammen formations. This suggests that intense deformation within Devonian rocks in Dickson Land can be explained by Eurekan deformation alone. Eurekan deformation also resulted in the formation of WNW–ESE- and N–S- to NNE–SSW-trending, kilometer-wide, open folds such as the Petuniabukta Syncline, and in inversion and/or overprinting of Early Devonian to Early Pennsylvanian normal faults by sinistral-reverse Eurekan thrusts. WNW–ESE-striking faults merge at depth with similarly trending and dipping ductile shear zone fabrics in Proterozoic basement rocks, which likely formed during the Timanian Orogeny. Conclusions A NNE-dipping shear zone, which is part of a large system of Timanian thrusts in the Barents Sea, controlled the formation of WNW–ESE-striking Devonian–Mississippian normal faults and syn-tectonic sedimentary rocks in Billefjorden. Eurekan strain partitioning and decoupling suggest that the Svalbardian Orogeny did not occur in Svalbard.

Characterization of pore space in Permo-Triassic sandstone from SW-Germany using the anisotropy of magnetic susceptibility

Pore space in siliciclastic rocks is one of the most important petrophysical properties in geothermal and hydrocarbon reservoir rock characterization. We used the anisotropy of magnetic susceptibility (AMS) of ferrofluid-impregnated Permo-Triassic sandstones of different Buntsandstein and Rotliegend facies as a proxy for pore space anisotropy and preferred flow direction as a case study for reservoir characterization. We compared the calculated ferrofluid porosity (2–21%) with He porosity (2–26%) and permeability (0.002–214 mD) and described the sediment microstructure using petrographic point-counting analysis. For water- and oil-based ferrofluid impregnation, we observed a positive correlation with He porosity and mass and susceptibility impregnation efficiency were used to control the quality of the impregnation process. Triaxial to oblate magnetic rock fabrics were mostly mimicked by the magnetic pore fabrics, except for some of the water-based ferrofluid impregnated samples, where magnetic ellipsoid shapes changed from oblate to prolate. AMS of the unimpregnated sandstones reflects well defined primary sedimentary to diagenetic fabrics with grain imbrication and cross bedding along with more laminated sedimentary structures. Deviation in ferrofluid-impregnated AMS axes orientation can be related either to the low anisotropy < 1.07 in sandstones from the Lower and Upper Buntsandstein, or the low impregnation efficiency. The mimicry is mostly better when the magnetic susceptibility of the sandstone is higher due to a higher concentration of phyllosilicates while micro-porosity is controlled by the clay fabric. A comparison of sediment petrography with magnetic pore fabrics suggests that the pore space is controlled by the bedding of the sandstones with mostly no preferred flow direction within the bedding plane.Graphical

Semi-Automated Rock Classification for Permeability Estimation Using High-Resolution Computed Tomography Scan Images, Core Photos, and Well Logs

Summary Reliable estimation of petrophysical properties can be challenging, especially in geological formations with rapid variation in the spatial distribution of rock components. The spatial distribution of rock components, also known as rock fabric, is often not captured by conventional well logs that are typically used for the estimation of petrophysical properties. The aforementioned challenge is rooted in the limited vertical resolution of conventional well logging tools. Alternatively, specialized tools and techniques, such as nuclear magnetic resonance (NMR) and computed tomography (CT) scan images, can provide information on the variation in the rock fabric of geological formations. The objectives of this paper are (a) to use 2D CT scan images and core photos, conventional well logs, NMR logs, and core-measured properties for semi-automated rock classification, (b) to develop class-based rock physics models for enhanced petrophysical properties estimation, and (c) to provide a method to expedite the detection of quantitative image-based rock classes in cored wells. First, we conducted conventional formation evaluation (CFE) for the initial assessment of petrophysical properties. Then, we implemented three different rock classification techniques for class-based estimation of petrophysical properties. The first of the rock classification techniques uses routine core analysis (RCA) data to define hydraulic units. The second rock classification technique uses NMR data to characterize the changes in pore-size distribution of the evaluated formation. The last rock classification technique integrates quantitative image-based features from CT scan images and core photos with NMR data. Finally, the obtained rock classes from the abovementioned rock classification techniques are used to derive class-based permeability models. We applied the proposed workflow to a pilot well drilled in a saline water aquifer formation that will be used for CO2 injection and storage in the Northern Lights carbon capture and storage (CCS) project. The extracted image-based rock fabric features were in agreement with the visual aspect of the evaluated depth intervals. The detected rock classes captured the fluid-flow behavior using a permeability-based cost function in two of the implemented rock classification techniques, the variation in petrophysical and compositional properties through well logs, and quantitative rock fabric of the evaluated depth interval through the core image data. Finally, the use of class-based rock physics models improved permeability estimates, decreasing the mean relative error by up to 37% compared with formation-based permeability estimates from a conventional method (formation-based porosity-permeability correlations). One of the key contributions of the proposed workflow is that it integrates conventional well logs, core-measured properties, NMR logs, and high-resolution image data. As a result, the obtained integrated rock classes capture key petrophysical and geological parameters of the evaluated depth intervals that are typically not included in rock classification efforts. The obtained integrated rock classes can potentially improve the development of accurate geological models, which are used in simulation efforts as a screening tool for the selection of geological formations for CO2 storage as well as for storage capacity, selection of CO2 injection intervals, and containment forecasting.

Heterogeneity‐Driven Localization and Weakening in Scaly Clays From a Fossil Accretionary Prism

AbstractIn accretionary prisms, scaly clays structure might be the result of strain localization and weakening or strain delocalization and hardening. Therefore, it is not clear how they influence the mechanical behavior of the accretionary prism. Here, we investigate the effect of rock fabric on the mechanical properties of scaly clays sampled from a fossil accretionary prism in a range of pressure‐temperature conditions typical of burial within accretionary prisms. We performed triaxial experiments using a direct shear configuration on samples in which the natural scaly clay fabric and natural lithological boundaries were preserved, at confining pressures of 10–120 MPa and temperatures of 25–150°C. Samples with homogeneous composition and natural scaly fabrics display strain hardening behavior at all tested conditions. Shearing at high P‐T displays lower strength with respect to shearing at low P‐T. The samples containing a lithological contact display strain hardening at low P‐T and weakening at high P‐T conditions. After the experiments, the homogeneous samples show a distributed foliation and short, discontinuous shear surfaces at the contacts with the sample holder, while the samples including a contact developed a through‐going shear zone composed of a series of en‐echelon shear surfaces. A reduced smectite and water content is observed in the post‐deformation samples, suggesting that weakening may correlate with water release during dehydration reactions of clay minerals at 150°C. This shows how both dehydration reactions at high P‐T conditions and strain localization along lithological boundaries promote brittle behavior within scaly clays in subduction zones accretionary prisms.

A Review of the Mineralogy, Petrography, and Geochemistry of Serpentinite from Calabria Regions (Southern Italy): Problem or Georesource?

Serpentinite rocks testify to the ocean-floor metamorphism that took place and transformed the original mineralogy and fabric of previous ultramafic rocks. Due to their tectonic and petrological importance, in recent decades, there has been increasing interest in serpentinites. From the economic point of view, it is worth noting that, due to their beauty and attractiveness, serpentinite rocks have been exploited and traded as building and ornamental stones since prehistorical times worldwide. In this work, we provide a comprehensive report of the petrographic, mineralogical, petrophysical, and geochemical features of the serpentinites cropping out in the northern sector of the Calabria–Peloritani Orogen (Italy), where the historical quarries are located. Since these serpentinite rocks have been traded for a long time and employed as an excellent building material, their detailed knowledge may provide a useful tool to understand their behavior when they are employed as building materials, to predict their performances upon emplacement in monuments, and to plan correct restoration by considering the provenance of the lithotypes employed. Moreover, comprehensive characterization is also particularly important because it has been reported that serpentinites from Calabria may contain asbestiform and other fibrous minerals, as testified by the occurrence of chrysotile, tremolite, and actinolite asbestos located within the veins, which could lead to health problems due to asbestos fiber exposure. Finally, serpentinite may be considered as an important potential CO2 sequestration sink.

Devonian-Carboniferous extension and Eurekan inversion along an inherited WNW-ESE-striking fault system in Billefjorden, Svalbard.

Background: The Billefjorden area in central Spitsbergen hosts thick Lower-lowermost Upper Devonian, late-post-Caledonian collapse deposits presumably deformed during the Late Devonian Svalbardian Orogeny. These rocks are juxtaposed against Proterozoic basement rocks along the Billefjorden Fault Zone and are overlain by uppermost Devonian-early Permian deposits of the Billefjorden Trough, a N-S-trending Carboniferous rift basin bounded by the Billefjorden Fault Zone. Methods: We interpreted seismic reflection (also depth-converted), bathymetric, and exploration well data. Results: The data show abundant Early Devonian, WNW-ESE-striking (oblique-slip) normal faults segmenting the Billefjorden Trough, and a gradual decrease in tectonic activity from the Early Devonian (collapse phase) to early Permian (post-rift phase). Early Devonian-Middle Pennsylvanian WNW-ESE-striking faults were mildly reactivated and overprinted and accommodated strain partitioning and decoupling in the early Cenozoic. This resulted in intense deformation of Lower Devonian sedimentary rocks and in the formation of bedding-parallel décollements, e.g., between the Lower Devonian Wood Bay and the uppermost Pennsylvanian-lowermost Permian Wordiekammen formations. This suggests that intense deformation within Devonian rocks in Dickson Land can be explained by Eurekan deformation alone. Eurekan deformation also resulted in the formation of WNW-ESE- and N-S- to NNE-SSW-trending, kilometer-wide, open folds such as the Petuniabukta Syncline, and in inversion and/or overprinting of Early Devonian to Early Pennsylvanian normal faults by sinistral-reverse Eurekan thrusts. WNW-ESE-striking faults merge at depth with similarly trending and dipping ductile shear zone fabrics in Proterozoic basement rocks, which likely formed during the Timanian Orogeny. Conclusions: A NNE-dipping shear zone, which is part of a large system of Timanian thrusts in the Barents Sea, controlled the formation of WNW-ESE-striking Devonian-Mississippian normal faults and syn-tectonic sedimentary rocks in Billefjorden. Eurekan strain partitioning and decoupling suggest that the Svalbardian Orogeny did not occur in Svalbard.

Anisotropy of magnetic susceptibility impressed during rock magnetic procedures (AF, IRM) and information on the domain state of the magnetic carriers

We present and interpret anisotropy of magnetic susceptibility (AMS) fabrics in various rocks, focusing on the effects of Alternating Field (AF) demagnetization and Isothermal Remanent Magnetization (IRM). Our findings reveal that AMS in samples from intrusive rocks with large multidomain magnetite grains is minimally affected by IRM or static AF demagnetization. In nearly isotropic volcanic rocks with titanomagnetite pseudo single domain (PSD) carriers, AMS fabrics caused by static AF demagnetization are easily identifiable, with the most prominent effect being a well-defined AMS lineation (up to 1.04) in the direction of the applied AF demagnetization. Conversely, in samples from rapidly cooled volcanic rocks with titanomagnetite of smaller magnetic grain size, an AMS foliation (∼1.02) is observed orthogonal to the direction of the applied AF field, instead of a lineation. In such samples, an IRM produces a much larger AMS foliation up to 1.3 orthogonal to the IRM. The IRM-impressed AMS is also particularly strong in metamorphic rocks in the greenschist facies with either titano-hematite or pyrrhotite magnetic carriers. Samples with the largest IRM-impressed fabric have very high Mrs/Ms ratio (>∼0.4). Mrs/Ms ratios above 0.5 may indicate the contribution of SD magnetic grains with multiaxial anisotropy. As the apparent multiaxial anisotropy is especially observed in volcanic rocks with micron size dendrites of titanomagnetites, the complex shape of the magnetic particles and their chemical composition likely play a key role in IRM-impressed AMS. AMS fabric in volcanic rocks should not be measured after static AF demagnetization. Tumbling AF demagnetization does not alter significantly the initial magnetic fabric and could be safely used in rocks with strong magnetization related to lightning possibly recording an IRM impressed AMS.

Chickies Rock, a striking promontory on the Susquehanna River: the early Cambrian type locality of the trace fossil Skolithos and a model site for structural analysis

Abstract Chickies Rock rises abruptly from the east bank of the Susquehanna River at Columbia, Pennsylvania, where it breaks through a ridge held up by massively bedded quartzite. Here in the 1830s, Samuel Haldeman recognized long straight tubes that he later described as Skolithos linearis , penetrating the quartzite. Uncertain about the nature of these cylindrical ‘vermiform or linear’, unbranched ‘stems’, Haldeman first treated them as a subgenus of Fucoides , to which root-like traces were then often assigned. By the time James Hall first illustrated the species in 1847, Haldeman was sure they were burrows of a worm-like animal, as the name he had chosen implied. Since 1960, Donald Wise has developed a detailed analysis of structural deformation of the Chickies Anticline, using the Skolithos burrows as ‘plumb-bobs’ against which Taconic rotation of the rock fabric can be measured. Wise showed that later Alleghanian deformation produced prominent folds with external rotation up to twice as great as that of the rock fabric itself. Now conserved as a county park, Chickies Rock attracts many visitors. Its cliff-top is a superb viewpoint from which to contemplate progressive westward migration of the Appalachian drainage divide, ongoing since the late Jurassic opening of the Atlantic Ocean.