Risk Of Adverse Biological Effects Research Articles

Accumulation of heavy metal(loid)s and polycyclic aromatic hydrocarbons in the sediment of the Prahovo Port (Danube) and associated risks.

The current study investigated the concentrations, possible sources, toxicity, and ecological risk of eight heavy metal(loid)s (As, Cd, Cr, Cu, Hg, Ni, Pb, Zn) and sixteen priority polycyclic aromatic hydrocarbons (PAHs) in surface sediments in the port of Prahovo (Danube, Serbia). Among the examined HMs, the most abundant was Cu (38.3mg/kg), followed by Zn. The Σ16PAHs concentrations ranged from 25 to 112.5µg/kg, with 4-ring PAHs (17.3µg/kg) being the most dominant in the study area. The mean and maximum values of HMs and PAHs obtained in this study were below the national regulatory limits and within environmental criteria. Particularly significant correlations between As, Cd, Cr, Ni, Pb, Zn, 5-, 6-ring PAHs, as well as between Pb and Hg, indicated their similar anthropogenic sources, pathways, and adsorption mechanisms. These findings were confirmed by cluster analysis and principal component analysis. Diagnostic ratios demonstrated that contamination in inner port stations was characterized by pyrogenic sources, while PAHs of petrogenic origin prevailed in samples near the port entrance. The mean ERM quotient (mERMq), toxic risk index (TRI), and toxic equivalent quotient (TEQ) were also calculated to assess the toxicity of the investigated HMs and PAHs in sediments. Positive matrix factorization suggested four potential sources as the main components of sediment contamination, whereas the risk assessment indicated a low or relatively insignificant risk of adverse biological effects from the combined toxicity of HMs and PAHs for the entire study area.

Seasonal distribution and risk assessment of polycyclic aromatic hydrocarbons (PAHs) in surface sediments from the Giresun coast of southeastern Black Sea

Seasonal sediment samples were collected along the Giresun coastline of southeastern Black Sea and analyzed to detect the levels of 16 polycyclic aromatic hydrocarbons (PAHs). The PAH levels, ranging from 28.47 to 444.36 ng g−1 with the mean of 102.57 ng g−1 remained lower than those detected in most of the other sediment studies conducted worldwide. The percentage of three-ring PAHs (38.9%) was rather high, followed by that of 5-ring PAHs (21.8%). Detection rates revealed that PAHs in surface sediments along the Giresun coastline are mainly associated with coal combustion and local emissions. The evaluation with sediment quality guidelines (SQGs) showed that the level of PAHs was comparable to that at which the risk of adverse biological effects cannot be ruled out (≥TEL and <PEL) in some stations. The risk posed by PAHs in Giresun coastal sediments appears to be low to moderate ecological risk according to the risk quotient.

A critical analysis of research methods and experimental models to study biocompatibility of endodontic materials.

Materials used for endodontics and with direct contact to tissues have a wide range of indications, from vital pulpal treatments to root filling materials and those used in endodontic surgery. In principle, interaction with dental materials may result in damage to tissues locally or systemically. Thus, a great variety of test methods are applied to evaluate a materials' potential risk of adverse biological effects to ensure their biocompatibility before commercialization. However, the results of biocompatibility evaluations are dependent on not only the tested materials but also the test methods due to the diversity of these effects and numerous variables involved. In addition, diverse biological effects require equally diverse assessments on a structured and planned approach. Such a structured assessment of the materials consists of four phases: general toxicity, local tissue irritation, pre‐clinical tests and clinical evaluations. Various types of screening assays are available; it is imperative to understand their advantages and limitations to recognize their appropriateness and for an accurate interpretation of their results. Recent scientific advances are rapidly introducing new materials to endodontics including nanomaterials, gene therapy and tissue engineering biomaterials. These new modalities open a new era to restore and regenerate dental tissues; however, all these new technologies can also present new hazards to patients. Before any clinical usage, new materials must be proven to be safe and not hazardous to health. Certain international standards exist for safety evaluation of dental materials (ISO 10993 series, ISO 7405 and ISO 14155‐1), but researchers often fail to follow these standards due to lack of access to standards, limitation of the guidelines and complexity of new experimental methods, which may cause technical errors. Moreover, many laboratories have developed their testing strategy for biocompatibility, which makes any comparison between findings more difficult. The purpose of this review was to discuss the concept of biocompatibility, structured test programmes and international standards for testing the biocompatibility of endodontic material biocompatibility. The text will further detail current test methods for evaluating the biocompatibility of endodontic materials, and their advantages and limitations.

In-stream habitat availability for river dolphins in response to flow: Use of ecological integrity to manage river flows.

Population decline and extinction risk of river dolphins are primarily associated with flow alteration. Previous studies predominantly highlighted maintenance of adequate flow for low water seasons when habitats contract and the risk of local extinction escalates. Although river dolphins are sensitive to reduction in river flow, no studies quantify the relationships between flow and ecology of river dolphins to mitigate the potential adverse impacts of flow alteration. We quantify the relationships between flow and the ecology of river cetaceans concerning Ganges River dolphins (GRD; Platanista gangetica gangetica) usable area availability (AWS) for the low water season at wider flows (50-575 m3/s) at finer spatial and temporal scales. This study reveals that distribution of area usable to GRD is highly regulated by the adequate flow and river attributes (velocity and depth) interactions that likely offer energetically efficient modes of locomotion to GRD, suggesting the hydro-physical environment as a major determinant of river dolphin distribution and abundance. Flow and AWS relationships indicate that the flow during the dry season negatively contributed to AWS, whereas that of pre-monsoon maximized the AWS, suggesting that modifying flow regimes does alter in-stream habitats at varying spatial scales and may influence life-history strategies. Substantial fragmentation in suitable pool availability and loss of longitudinal connectivity exhibited by dry season flow suggested a higher risk of adverse biological effects during the dry season, which may reduce population viability by reducing survivorship and reproduction failure. Owing to river dolphins' dependence on the attribute of freshwater flow, they can be expected to be more affected by flow regulations as interactive effects. Considering the seasonal effects and changes in the availability of usable areas by flow alteration, adopting effective habitat retention plans by water-based development projects appears critical to avoid further ecological risks in aquatic species conservation. Identifying priority riverscapes for river cetaceans and prioritizing investment opportunities is an essential first step towards effective riverine cetacean conservation.

In Situ DGT Sensing of Bioavailable Metal Fluxes to Improve Toxicity Predictions for Sediments.

An increased risk of adverse biological effects of metals in sediments may be accompanied by high labile metal fluxes as measured by the diffusive gradients in thin films (DGT) technique. To improve the usefulness of the DGT technique for sediment quality risk assessments, we used the simpler and more cost-effective piston DGTs rather than planar DGT probes to measure bioavailable metal fluxes in naturally contaminated sediments with widely varying composition (properties, metals and concentrations) and assessed their prediction of toxicity to amphipod reproduction in a flow-through microcosm. DGT pistons were deployed in sediments under different conditions, both in the field (in situ) and in the laboratory in sediment cores (lab-equilibrated) and in homogenized sediments (lab-homogenized). We demonstrated that the metal flux toxic units, DGTTU, measured in situ best predicted the magnitude of toxicity to amphipod reproduction. For sediments that had been highly disturbed before testing, DGTTU were less predictive for observed toxicity, but the copper flux alone (DGTTU-Cu) was effective, indicating copper was the primary cause of toxicity in these highly perturbed sediments. Overall, our study highlighted that the adverse effects induced by excessive bioavailable metals in contaminated sediments can be consistently sensed by the DGT pistons.

Deepwater ocean outfalls: A sustainable solution for sewage discharge for mega-coastal cities (Sydney, Australia): Influence of deepwater ocean outfalls on shelf sediment chemistry

A cliff-face disposal system discharging approximately 940 ML/day, or 80% of sewage generated by the City of Sydney (Australia) (population 3.3 million) was replaced by three deepwater ocean outfalls in the early 1990s. Enrichment of anthropogenic chemicals from cliff-face discharges raised concerns regarding long-term accumulation of sewage particulates and associated contaminants in offshore sediments and for reduced beach water quality. The current post-commissioning investigation detected a southward gradient of sediment fining and increased total organic carbon in the study region. Deepwater ocean discharges have not contributed to an accumulation of fines, or to increased metallic/nonmetallic chemicals of concern with no elevated risk of adverse biological effects beyond pre-commissioning conditions. Instead, the best modelled relationship was recorded between benthic infauna and sedimentary fines and not to contaminants. Historic sea dumping prior to 1932 in the north of the study area has resulted in enrichment of some non-bioavailable sedimentary metals.

Persistent organic pollutants and related biological responses measured in coastal fish using chemical and biological screening methods

ABSTRACTThe aim of this study was to investigate the spatial distribution, levels of dioxin-like compounds (DLC), and biological responses in two fish species. The viviparous eelpout (Zoarces viviparus) was collected from various locations in the Baltic Sea and in fjords of Kattegat and Skagerrak, while shorthorn sculpin (Myoxocephalus scorpius) was obtained at the polychlorinated biphenyl (PCB) polluted site in North West Greenland. Significant differences were detected both in contaminant levels and relative contributions from either polychlorinated dibenzodioxins (PCDD) or polychlorinated dibenzofurans (PCDF or furans) and mono-ortho- and non-ortho (coplanar) polychlorinated biphenyls (dl-PCB). Fish from the eastern Baltic Sea generally displayed higher contributions from PCDD/F compared to dl-PCB, whereas dl-PCB were generally predominated in fish from Danish, Swedish, and German sites. Levels of dl-PCB in muscle tissues were above OSPAR environmental assessment criteria (EAC) for PCB118, indicating a potential risk of adverse biological effects in the ecosystem, whereas levels of the total WHO-TEQs were below threshold for sea food suggesting limited risks for humans. No significant relationships between levels of DLC (expressed as WHO-TEQ), and biological responses such as the induction of CYP1A enzymatic activity and fry reproductive disorders were observed in eelpout. No marked relationship between WHO-TEQ and combined biological aryl hydrocarbon receptor-mediated transactivity (expressed as AhR-TEQ) was noted. However, there was a positive correlation between polycyclic aromatic hydrocarbon (PAH) metabolites and induction of CYP1A activity, suggesting that PAH exhibited greater potential than DLC to produce biological effects in eelpout from the Baltic Sea.

Possibility of implementation and environmental benefits of high-voltage power supply in developing countries, example of Croatia

One of the significant environmental aspects of transport and cargo manipulation in ports is air pollution. Coupled with other industrial sources, port traffic and operations can cause exceedances of environmental limit values and thus increase the risk of adverse biological effects including toxicity to humans. The proposed paper will describe the main characteristics of the on-shore high-voltage power supply and will discuss the extent to which the implementation of this technology is justified with respect to environmental protection, development of sustainable transport and the protection of human health. The paper suggests implementing on-shore high-voltage power supply with the aim of securing a sustainable development of world ports and minimizing their harmful effects to the environment, taking into consideration the economic aspects. After analysing the results, this technology provides a wider perspective for its future implementation into Croatian ports. The paper will assess the possible environmental effects of implementing this new technology into Croatian ports.

Distribution of polycyclic aromatic hydrocarbons in sediments of Akaki River, Lake Awassa, and Lake Ziway, Ethiopia.

The quantification of 14 polycyclic aromatic hydrocarbons (PAHs) was carried out in sediment samples collected from Akaki River, Lake Awassa, and Lake Ziway, Ethiopia. The concentration of PAHs in the samples was determined using gas chromatography-mass spectrometry (GC-MS) in selected ion monitoring (SIM) mode, after microwave-assisted extraction (MAE), using acetone/n-hexane (1:1, v/v) mixture. The accuracy of the method was determined by extracting and analyzing New York/New Jersey waterway sediment standard reference material (SRM 1944). The measured concentrations of PAHs in SRM 1944 agreed well with the certified values. In samples from Akaki River, Lake Awassa, and Lake Ziway, the total content of PAHs determined ranged from 0 to 3070ng/g (average 534ng/g), 24.9 to 413ng/g (average 169ng/g), and 15.0 to 305ng/g (average 175ng/g), respectively. Source ratios indicated that the PAHs were mainly from petrogenic origin. Sediments from all sampling sites indicated negligible levels of toxicity with no risk of adverse biological effects.

Assessment of heavy metals pollution using AVS-SEM and fractionation techniques in Edku Lagoon sediments, Mediterranean Sea, Egypt

A method is presented to evaluate the fractionation of metals (Fe, Zn, Cu, Pb, Cd and Ni), acid volatile sulfide (AVS) and simultaneously extracted metals (SEM) in Edku lagoon sediments. Thirteen sediment samples were collected from the study area in the period of 2010–2011 to assess the potential bioavailability and toxicity of the selected metals. According to classification of the Interim Sediment Quality Quidelines (ISQG), five stations near the drains exhibited 10% toxic probability. The high AVS and low ∑SEM ranges in Summer were identified as 6–138 and 0.86–3.3 µmol g−1dry wet, respectively which are referring to the low mobility of heavy metals in this season and vice versa for winter (2.5–23.9 and 1.16–3.82 µmol g−1dry wet, respectively). According to the evaluation of USEPA, all sediment samples showed ∑SEM/AVS < 1 and ΣSEM–AVS < 0 and this indicates that Edku lagoon sediments didn't cause any adverse effects. Meanwhile, the calculations of the global contamination factor (GCF) and the individual contamination factors (ICF) using fractionation technique gave values of 111.644 and 84.555 in El Bosily drain and station 1 near the cages of fish farm, respectively due to possible contamination. Interestingly, the collected data refer that the mobility and bioavailability of heavy metals in Edku lagoon sediments posed a low risk of adverse biological effects due to cadmium, copper, lead, nickel and zinc in all evaluated stations.

Total petroleum hydrocarbons and heavy metals in the surface sediments of Bohai Bay, China: Long-term variations in pollution status and adverse biological risk

Surface sediments collected from 2001 to 2011 were analyzed for total petroleum hydrocarbons (TPH) and five heavy metals. The sediment concentration ranges of TPH, Zn, Cu, Pb, Cd and Hg were 6.3–535μg/g, 58–332μg/g, 7.2–63μg/g, 4.3–138μg/g, 0–0.98μg/g, and 0.10–0.68μg/g, respectively. These results met the highest marine sediment quality standards in China, indicating that the sediment was fairly clean. However, based on the effects range-median (ERM) quotient method, the calculated values for all of the sampling sites were higher than 0.10, suggesting that there was a potential adverse biological risk in Bohai Bay. According to the calculated results, the biological risk decreased from 2001 to 2007 and increased afterwards. High-risk sites were mainly distributed along the coast. This study suggests that anthropogenic influences might be responsible for the potential risk of adverse biological effects from TPH and heavy metals in Bohai Bay.

AVS-SEM relationships and potential bioavailability of trace metals in sediments from the Southeastern Mediterranean sea, Egypt

In risk assessment of aquatic sediments, much attention is paid to the difference between acid volatile sulfide (AVS) and simultaneously extracted metals (SEM) as indicators of metal bioavailability. Distribution of AVS and SEM (Cd, Cu, Ni, Pb and Zn) were determined in 20 representative sampling sites collected along the Egyptian Mediterranean coast. Total SEM concentration [ΣSEM] ranged from 0.012 to 0.241 μmoleg−1. AVS concentrations were much more variable, showing significant spatial variations. The values ranged from 0.015 to 31.326 μmoleg−1. The different relationships between AVS and SEM to establish mechanical models such as the ratio of ΣSEM and AVS [ΣSEM/AVS], the difference between the ΣSEM and AVS [ΣSEM–AVS], or the organic carbon normalised difference between SEM and AVS [ΣSEM-AVS]/foc models were used as parameters to evaluate potential bioavailability. Considering SEM/AVS model, sediments at the Western Harbour, Eastern Harbour, Ras El-Burr, El-Gamil East, and Port Said stations are occasionally toxic, while according to SEM-AVS model, no indication of associated adverse toxic effect would occur at any of the sampling sites. Calculated [ΣSEM-AVS]/foc was<130 μmoleg−1 in the sediments indicating that sediments should pose a low risk of adverse biological effects owing to cadmium, copper, lead, nickel and zinc. Association of adverse effects to aquatic organisms was determined, using the classification of the sediments according to the Sediment Quality Guidelines (SQGs). The marine Threshold Effect Levels (TEL) and Probable Effect Levels (PEL) were used in this work and in order to obtain a more realistic measure of predicted toxicity, mean PEL quotients (PELq) were calculated. The mean PELq calculated for the sampling sites was (0.11–1.5) and categorised as slightly toxic at all stations except Baghoush, Nobarreya and western harbour, which had PELq<0.1 and categorised as non-toxic. The obtained data concluded that the remobility and bioavailability of trace metals contained in surfacial sediments of the Egyptian Mediterranean coastal area are low.

Distribution and ecological risk of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in surface sediments from the Bizerte lagoon, Tunisia

Polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) were determined in 18 surface sediment samples collected from Bizerte lagoon, Tunisia. The total concentrations of ten PCBs (∑PCBs) and of four OCPs (∑OCPs) in the sediments from this area ranged from 0.8 to 14.6 ng g(-1) dw (average value, 3.9 ng g(-1) dw) and from 1.1 to 14.0 ng g(-1) dw (average value, 3.3 ng g(-1) dw), respectively. Among the OCPs, the range of concentrations of dichlorodiphenyltrichloroethane and its metabolites (DDTs) and hexachlorobenzene (HCB) were 0.3-11.5 ng g(-1) dw (1.9 ng g(-1) dw) and 0.6-2.5 ng g(-1) dw (1.4 ng g(-1) dw), respectively. Compositional analyses of the POPs indicated that PCB 153, 138 and 180 were the predominant congeners accounting for 60 % of the total PCBs. In addition, p,p'-DDT was found to be the dominant DDTs, demonstrating recent inputs in the environment. Compared with some other regions of the world, the Bizerte lagoon exhibited low levels of PCBs and moderate levels of HCB and DDTs. The high ratios ΣPCBs/ΣDDTs indicated predominant industrial versus agricultural activities in this area. According to the established guidelines for sediment quality, the risk of adverse biological effects from such levels of OCPs and PCBs, as recorded at most of the study sites, was insignificant. However, the higher concentrations in stations S1 and S3 could cause biological damage.

Distribution and ecological risk of organochlorine pesticides and polychlorinated biphenyls in surficial sediments from the Eastern Aegean

Organochlorine pesticides and polychlorinated biphenyls were determined in sediment with three replicates collected from the Eastern Aegean coast in 2008. Total concentrations of OCPs and PCBs in sediments ranged from bdl to 17.8, bdl to 26.1ngg−1 dwt, respectively. The results indicated that DDTs were the predominant contaminant in sediments. p,p′-DDE was the most often found OCP at all stations except Dardanelles Strait Entrance. DDTs may be derived from the aged and weathered agricultural soils and transported by surface run off from the rivers. OCPs and PCBs were present in noticeably higher concentrations at Izmir Inner Bay than the other sites. According to established sediment quality guidelines, DDTs at four sites and heptachlor at two sites would be more concerned for the ecotoxicological risk in the Eastern Aegean. In addition, the risk of adverse biological effects from the levels of PCBs at sites Candarli and Izmir Inner Bay should be significant.

Distribution and sources of organochlorinated contaminants in sediments from Izmir Bay (Eastern Aegean Sea)

Eighteen surface sediment samples representative of the entire Izmir Bay were analyzed for organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs). This was in order to provide extensive information concerning the recent deposition of these compounds in this area, together with levels, distribution, possible sources and potential biological risk. Sites that were contaminated by high concentrations of organochlorine compounds were associated with dense population, such as the harbour and the Gediz River estuary. Relatively higher ΣDDT concentrations and high DDT/DDE+DDD ratios in the Gediz River estuary indicated DDT usage, probably linked to public health emergencies. According to the established guidelines for sediment quality, the risk of adverse biological effects from such levels of OCPs and PCBs as recorded at most of the study sites was insignificant. But the higher concentrations in Inner bay and in the Gediz River estuary could cause biological damage.

Selenium concentration, speciation and behavior in surface waters of the Canadian prairies

Similar to the San Joaquin Valley of California, the Canadian prairies are underlain with seleniferous shale and have recently witnessed a significant expansion in irrigated agriculture. The irrigated acreage in the prairies is expected to further increase due to global warming and changes in human use patterns. This raises concerns over potential selenium (Se) contamination in prairie surface waters and risk of adverse biological effects. To test the potential for elevated Se in the prairies, Se concentrations and speciation were examined in surface water, sediments, and sediment porewater in three water bodies in southern Manitoba, Canada, along a north–south transect with a gradient of irrigation and agricultural activities. A selenite addition experiment was also performed in mesocosms in a prairie wetland to assess the risk of increasing Se loading to the prairie waters. Overall, our results indicate that Se concentrations in the prairie waters of southern Manitoba are presently low except during the snowmelt season, that Se speciation is dominated by selenate which is of lower toxicity than selenite, and that if additional selenite is discharged into the prairie waters, it will be quickly removed from the surface water to the sediment. The low Se risk in the Canadian prairies is attributed to high soil drainability and relatively small scale of irrigation at present. The Se problem as being experienced in central California is thus unlikely to occur in surface waters of the Canadian prairies, although Se contamination in ground water is possible should the irrigated acreage continue to increase.

Occurrence and possible sources of polychlorinated biphenyls in surface sediments from the Wuhan reach of the Yangtze River, China

Twenty-seven surface sediment samples were collected from the mainstream and eight tributaries of the Wuhan reach of the Yangtze River, China, in 2005, in order to assess the distribution, possible sources, and potential risk of polychlorinated biphenyls (PCBs) in the environment. The total concentrations of PCBs (the sum of 39 congeners) ranged from 1.2 to 45.1 ng g −1 dry weight, with a mean value of 9.2 ng g −1. Sediment samples with the highest PCB concentrations came from the tributary sites, which are closer to PCB sources. Conversely, PCB concentrations in the sediment from the mainstream sites of Yangtze River were relatively low. The observed PCB levels were higher than those found in the sediments of other rivers in China, but lower than those in river sediments from other urban areas and harbors around the world. Low-chlorinated PCBs, dominated by tetra-PCBs and penta-PCBs, were identified as being prevalent in the surface sediments. Correlation analyses between the PCBs and the geochemistry and heavy metal content of the sediments suggest that the washing of these compounds from the land into the river by floods and heavy rains, or industrial wastewater and domestic sewage, may be the major sources of the PCBs. According to established sediment quality guidelines, the risk of adverse biological effects from the levels of PCBs recorded at most of the studied sites should be insignificant, although the higher concentrations at other sites could cause acute biological damage.

Environmental risk analysis of ultraviolet phototherapy centres in Ireland

Ultraviolet (UV) radiation is commonly used in the treatment of dermatological conditions such as psoriasis. It is known that high levels of exposure to UV radiation (UVR) will increase the risk of adverse biological effects. Exposure limit values for UVR have been developed by the International Commission on Non-Ionising Radiation Protection (ICNIRP) and occupational exposure to phototherapy staff should be kept within these limits. The use of environmental controls such as warning signs, good ventilation and UV-opaque curtains will significantly reduce the risks to staff, patients and members of the public. The aim of the study is to identify hazards in phototherapy centres and present recommendations for reducing risks. An environmental risk assessment has been carried out at eleven phototherapy centres in the Republic of Ireland. The study assessed a number of areas such as patient safety, staff safety, room design and UV leakage measurements. The majority of clinics are well designed and there is consistent use of protective equipment. The results show that on the whole there is a satisfactory level of risk management in phototherapy centres. Recommendations on maintaining good safety standards are presented.