Ring-core Fiber Research Articles

All-optical image transmission through a dynamically perturbed multimode fiber and a ring-core fiber using diffractive deep neural networks.

In this study, we present an all-optical image reconstruction technique leveraging a diffractive deep neural network (D2NN) within a ring-core fiber (RCF) architecture. Orbital angular momentum (OAM) modes are employed to facilitate imaging transmission. We experimentally validate the efficacy of our approach for complex field diffractive image reconstruction through a multimode fiber (MMF) and RCF at a 1550 nm operating wavelength. The experimental results demonstrate the superior performance of the proposed method in mitigating RCF scattering-to-restoration transformation issues, significantly outperforming traditional MMF-based imaging correction techniques.

Terahertz Ring-Core Fiber for First-Order Radial OAM Modes Transmission Without Phase Distortion

Terahertz Ring-Core Fiber for First-Order Radial OAM Modes Transmission Without Phase Distortion

High gain distributed Raman amplifier for orbital angular momentum mode-division multiplexing and wavelength-division multiplexing in a 104-km ring-core fiber over the C + L band

Mode-division multiplexing (MDM) and wavelength-division multiplexing (WDM) are regarded as effective solutions for enhancing the communication capacity of fiber-optic transmission systems. To extend the transmission distance, a suitable amplification technique is required to amplify the signal light, with distributed Raman amplifier (DRA) offering a high-flat gain. In this paper, we experimentally demonstrate the transmission of 3 orbital angular momentum (OAM) mode-division multiplexing and 9 wavelength-division multiplexing ranging from 1530 nm to 1610 nm over a 104-km self-designed ring-core fiber (RCF) with the assistance of DRA. The homemade all-fiber mode selective couplers (MSCs) can (de)multiplex OAM modes (OAM01, OAM11, OAM21) efficiently in long-distance MDM + WDM fiber-optic transmission systems. The OAM-DRA provides high gain (with an on-off gain greater than 10 dB) as well as flat gain (with a differential wavelength gain of less than 0.88 dB and a differential mode gain of less than 0.28 dB) over the C + L band.

Topological-charge-tunable and wavelength- switchable vortex laser enabled by a helically twisted high-absorption few-mode erbium-doped fiber.

Vortex beams carrying orbital angular momentum (OAM) offer a solution for enhancing spatial degrees of freedom, particularly in conjunction with wavelength division multiplexing, which can significantly boost data capacity for optical communication. Addressing the increasing demand for high information-carrying capacity, we present a dynamically tunable OAM laser source in this study. We demonstrate a ring-cavity vortex fiber laser employing intra-cavity mode conversion through a helically twisted high-absorption few-mode erbium-doped fiber (HA-FM-EDF). The constructed vortex fiber laser exhibits wavelength switchability via an integrated Sagnac loop, facilitated by a homemade ring-core fiber. Furthermore, topological-charge tunability is achieved through the utilization of twisted HA-FM-EDF with varying helical pitches. To our knowledge, this marks the first successful implementation of two-dimensional multiplexing of wavelength and OAM in a vortex fiber laser. The OAM laser serves as a versatile vortex source with high tunability and flexibility, holding significant potential for deployment in ultrahigh-speed/ultrahigh-capacity communications, ultrahigh-resolution imaging, and ultrahigh-sensitivity sensing applications.

Dynamic perturbation mitigation via polarization difference neural network for high-fidelity ring core fiber image transmission

Ring core fibers (RCFs) offer unique advantages in fiber image transmission, as their weakly-coupled orbital angular momentum mode groups result in high resolution images. However, severe image distortion is still exhibited during fiber transmission when subjected to strong disturbances. Here, we present a novel approach with a differential neural network, namely the polarization speckle differential imaging (PSDI) method, to significantly enhance both the robustness and image resolution of RCF-based imaging systems. When the fibers are disturbed, the PSDI method establishes the perturbation mapping relationship between two polarization speckles and utilizes a differential method to eliminate the perturbation effect in the speckles. This approach mitigates environmental disturbances, resulting in an enhancement of the imaging system's robustness in dynamic environments. By addressing the limitations of conventional techniques, this research represents a significant advancement in the field of fiber imaging technology, with potential applications ranging from endoscopy to high-resolution imaging in complex and dynamic settings.

Generating broadband cylindrical vector modes based on polarization-dependent acoustically induced fiber gratings using the dispersion turning point

Cylindrical vector beams (CVBs) with special polarization distribution have been extensively investigated due to the unique ways of interacting with matter. Although several configurations have been developed to generate CVBs, such as Q-plates and subwavelength gratings, the bandwidth of a single CVB is inherently narrow due to the phase geometry, which would limit its application for femtosecond lasers. Here, a broadband CVB mode converter based on an acoustically induced fiber grating (AIFG) and a tuning method of dispersion turning point (DTP) is demonstrated both theoretically and experimentally with the 3-dB bandwidth of 125 nm, which is more than 10 times that of conventional AIFGs. Not only can the DTP wavelength be tuned from the original 1500 nm to 1650 nm by thinning the fiber, but also the stable generation of a single broadband HE21odd/even mode can be controllably implemented by adjusting the polarization state of the incident light, owing to the larger beat length difference between HE21 and other CV modes. Additionally, the femtosecond CVBs and orbital angular momentum (OAM) modes are successfully generated and amplified by combining the broadband AIFG with a figure-9 mode-locked fiber laser. Meanwhile, it is verified by simulation that the choice of broadband CV mode and the tunability of DTP wavelength can be realized by designing ring-core fibers with different structures, which can furthermore improve the flexibility of generating high purity CVBs. This study provides a highly controllable technique for the generation of broadband CVBs and OAMs paving the way for high-capacity CVBs communication.

Chirally-coupled-ring fibers for arbitrary-order orbital angular momentum mode generation and detection.

A novel chirally-coupled-ring fiber (CCRF) is proposed for efficiently generating and detecting arbitrary-order orbital angular momentum (OAM) modes in ring-core fibers (RCFs). The CCRF comprises inner and outer cores, N angularly uniformly distributed dielectric rods, and a cladding layer. These rods, twisted along the fiber axis between the cores, introduce angular geometry perturbations to manipulate the core modes. Through meticulous theoretical modeling and systematic analysis grounded in coupled-mode theory, we reveal CCRF eigenmodes carrying spin-entangled OAM, elucidate the mode coupling and power transfer in CCRFs, and present the CCRF design principle. Utilizing the full-vector beam propagation method, we carry out a proof-of-principle experimental system to demonstrate the capability of CCRFs in OAM mode manipulation and their feasibility and superiority in system-level applications. Additionally, we generate OAM modes across a wide range of topological charges from ℓ = -8 to ℓ = 8 using CCRFs, with conversion efficiencies from 92.10% to 99.63% and mode purities from 90.28% to 99.48%. Attributed to a coaxial dual-core structure with core-separated geometry perturbations, CCRFs enable flexible manipulation of arbitrary-order OAM modes without altering core geometry parameters, effectively solving design flexibility and compatibility problems in conventional single-core fiber devices. The proposed CCRF holds great promise for fiber-based OAM applications, especially for RCF-based OAM multiplexing communications.

Helical-sampled fiber Bragg grating inscribed by a femtosecond laser in a ring core fiber.

The inscription of a helical-sampled fiber Bragg grating (HSFBG) in a ring core fiber (RCF) using a low repetition rate femtosecond laser point-by-point technique is demonstrated. The reflection spectrum exhibits several peak groups attributed to the helical-sampled structure, with the wavelength interval between different groups determined by the helical pitch. Meanwhile, the number and spacing of the peaks within each group are dictated by the RCF. An investigation into the effects of helical pitch, helical radius, and grating length of the HSFBG on the reflection spectra is conducted. Furthermore, thermal annealing experiments demonstrate that this HSFBG can survive at the temperatures up to 800°C.

Innovative suspended ring core fiber for SERS application

Solid core photonic crystal fibers (SC-PCFs) have garnered attention as probes for surface-enhanced Raman spectroscopy (SERS) due to their potential as optofluidic devices, offering heightened sensitivity and reliability compared to traditional planar/colloidal nanoparticle-based SERS platforms. A smaller core allows for more light interaction but might compromise sensitivity and reliability due to reduced surface area for interaction. Here, we introduce an innovative SC-PCF design aimed at resolving the trade-off between increasing the evanescent field fraction and the core surface area. By substituting a suspended silica rod with a suspended thin-silica ring, we augment the surface area for attached nanoparticles by one order of magnitude while retaining a substantial amount of evanescent light interaction with the analyte. Experimental findings showcase an improved sensitivity in SERS signal compared to previously reported top-performing PCF sensor designs. Importantly, with necessary refinement and optimization, this innovative fiber design extends beyond SERS applications, potentially amplifying the sensitivity of various other fiber-based sensing platforms.

Efficient multimode vectorial nonlinear propagation solver beyond the weak guidance approximation

In this paper, we present an efficient numerical model able to solve the vectorial nonlinear pulse propagation equation in circularly symmetric multimode waveguides. The algorithm takes advantage of the conservation of total angular momentum of light upon propagation and takes into account the vectorial nature of the propagating modes, making it particularly relevant for studies in ring-core fibers. While conventional propagation solvers exhibit a computational complexity scaling as Nmode4, where Nmode is the number of considered modes, the present solver scales as Nmode3/2. As a first example, it is shown that orbital angular momentum modulation instability processes take place in ring-core fibers in realistic conditions. Finally, it is predicted that the modulation instability process is followed by the appearance of breather-like angular structures.

The characteristics of vortex modes in twisted fiber with dielectrically chiral ring core

A novel twisted ring core fiber incorporating chiral material into the ring core is proposed, which supports orbital angular momentum (OAM) modes. Results show that between chirality and twist rate there exist a cooperative effect in birefringence and a competitive effect in mode index bifurcation between OAM modes with different helicity. The cooperative effect between chirality and twist rate also breaks the degeneracy within OAM modes of the same or opposite helicity while preserving the vectorial nature of the modes. The OAM modes generated by twisted dielectrically chiral fiber are less likely to have crosstalk. The dependences of OAM modes birefringence on chirality and twist rate are investigated. Additionally, the mode effective index bifurcation as a function of wavelength is also discussed under both kind of chirality. Owing to high birefringence, good refractive index bifurcation, we believe that this kind of fiber can find applications in new kind of OAM mode generators, OAM mode filters, optical communication, and sensing.

Emission of five OAM dispersive waves in dispersion-engineered double-ring core fiber

Beams carrying orbital angular momentum (OAM) have exhibited significant potential across various fields, such as metrology, image coding, and optical communications. High-performance broadband coherent OAM sources are critical to the operation of optical systems. The emission of dispersive waves facilitates the efficient transfer of energy to distant spectral domains while preserving the coherence among the generated frequency components. Light sources that maintain consistency over a wide range can increase the efficiency of optical communication systems and improve the measurement accuracy in imaging and metrology. In this work, we propose a germanium-doped double ring-core fiber for five OAM dispersive waves (DWs) generation. The OAM1,1 mode supported in the fiber exhibits three zero-dispersion wavelengths (ZDWs) located at 1275, 1720 and 2325 nm. When pumped under normal dispersion, the output spectrum undergoes broadening and exhibits five DWs, situated around 955, 1120, 1450, 2795 and 2965 nm, respectively. Concomitant with blue-shifted and red-shifted dispersive waves, the spectrum spans from 895 to 3050 nm with high coherence. The effect of the fiber and input pulse parameters on DWs generation, as well as the underlying dynamics of the dispersive wave generation process, are discussed. As expected, the number and location of DWs generated in the output spectrum have agreement with the prediction of the phase-matching condition. Overall, this multiple DWs generation method in the proposed fiber paves the way for developing efficient and coherent OAM light sources in fiber-based optical systems.

The Generation of Ultrahigh Repetition-Rate OAM Frequency Combs in Dual-Concentric Germania-Doped Ring-Core Fiber

The Generation of Ultrahigh Repetition-Rate OAM Frequency Combs in Dual-Concentric Germania-Doped Ring-Core Fiber

End-to-end learning strategy based on a frequency domain feature decoupling network emulator with joint probabilistic shaping and equalization for a 300-Gbit/s OAM mode division multiplexing transmission

Mode coupling and device nonlinear impairment appear to be a long-standing challenge in the orbital angular momentum (OAM) mode division multiplexing (MDM) of intensity modulation direct detection (IM/DD) transmission systems. In this paper, we propose an end-to-end (E2E) learning strategy based on a frequency domain feature decoupling network (FDFDnet) emulator with joint probabilistic shaping (PS) and equalization for an OAM-MDM IM/DD transmission with three modes. Our FDFDnet emulator can accurately build a complex nonlinear model of an OAM-MDM system by separating the signal into features from different frequency domains. Furthermore, a FDFDnet-based E2E strategy for joint PS and equalization is presented with the aim of compensating the signal impairment for the OAM-MDM IM/DD system. An experiment is carried out on a 300 Gbit/s carrierless amplitude phase-32 (CAP-32) signal with three OAM modes over a 10 km ring-core fiber transmission, and the results show that the proposed FDFDnet emulator outperforms the traditional CGAN emulator, with improvements in the modelling accuracy of 30.8%, 26.3% and 31% for the three OAM modes. Moreover, the receiver sensitivity of the proposed E2E learning strategy is higher than for the CGAN emulator by 3, 2.5, 2.2 dBm and the real channel by 5.5, 5.1, and 5.3 dBm for the three OAM modes, respectively. Our experimental results demonstrate that the proposed FDFDnet emulator-based E2E learning strategy is a promising contender for achieving ultra-high-capacity interconnectivity between data centers.

ExtraTrees-hidden Markov model based equalizer for mode division multiplexing ring-core fiber communication with non-orthogonal MultiCAP modulation

This paper presents an orbital angular momentum mode division multiplexing (OAM-MDM) ring-core fiber transmission method based on non-orthogonal multiband carrierless amplitude and phase (NMCAP) modulation with an extremely randomized trees-hidden Markov model (ExtraTrees-HMM)-based equalizer. The ExtraTrees-HMM equalizer uses the statistical characteristics of the received distorted signals to model the nonlinear channel of the system to classify these distorted signals into corresponding constellation classes. Experiments were conducted using a 216 Gbit/s OAM-MDM NMCAP modulation optical fiber communication system with 2 km ring-core fiber transmission and the results show that compared with a conventional Volterra nonlinear equalizer (VNE), the proposed ExtraTrees-HMM equalizer could improve the receiver sensitivity by 1 dB for OAM mode l = + 2, and 0.6 dB for OAM mode l = + 3. In addition, the computational complexity of the proposed equalizer was reduced by 43.94% compared with the VNE. In brief, the ExtraTrees-HMM is a promising equalization candidate for ultra-high-capacity inter-data-center interconnections.

Multiparameter sensor based on long-period grating in few-mode ring-core fiber for vector curvature and torsion measurement

With the rapid development of optical fiber sensor in physical measurement, it is of practical significant to realize multi-parameter measurement. In this work, we proposed and demonstrated a multiparameter sensor for curvature, torsion and temperature. The sensor is formed from CO2 laser-inscribed long-period grating (LPG) in few-mode ring-core fiber (RCF), which can convert fundamental mode to LP11 mode. One-side inscription enhances asymmetric index modulation in fiber, resulting in directionally sensitive to bend by intensity interrogation. The curvature sensitivities in various bending directions perform linearity in curvature range of 5–9.466 m−1. Curvature sensitivities are related to the bending directions. The intensity sensitivity achieves − 0.584 dB/m−1, 0.879 dB/m−1, and − 0.735 dB/m−1, respectively. And torsion sensitivity from -6.98 rad/m to 6.98 rad/m displays linearity with −0.554 dB/(rad/m). The measured influence of temperature can be negligible. The proposed RCF-LPG could not only be used as high-efficiency mode converter in mode division multiplexing systems but also be potential in few-mode fiber based multiparameter sensing fields.

Improving orbital angular momentum mode transmission with imperfect ring–core fiber

Orbital angular momentum (OAM), inherent to light beams characterized by helical phase fronts, represents an alternative spatial degree of freedom for photons. In recent years, OAM-based communication has gained significant attention as a potential solution to increase the capacity and spectral efficiency of optical fiber communication systems. In optical fibers, OAM modes can be generated and manipulated by utilizing specialized optical components and techniques. One approach involves using specially designed optical fibers, such as ring–core fibers, which have the capability to support multiple OAM modes. In the manufacturing process, the ring fiber is hardly made perfectly, especially the doped-cores. The introduced defect breaks the symmetry of the ring–core, which has a serious impact on OAM mode transmission. Using a material with a slightly higher refractive index than the cladding to wrap the ring–core is effective in reducing impairment of defects. After numerical simulation, the proposed method improves the walk-off length by a factor of 2–40.

An efficient nonparaxial and bidirectional wave propagation method for optical fibers & fiber components

We present an efficient method for nonparaxial (i.e., wide angle) and bidirectional wave propagation in optical fibers and fiber components. The method is applicable to all structures such as tapers and fiber gratings which are azimuthally symmetric in respect of the refractive index distribution and the geometry. We use the collocation method to numerically solve the Helmholtz equation as this method allows to take advantage of the symmetry of the structure. This results in reduction of a 3-D propagation problem to a 2-D propagation problem giving a computational advantage by orders of magnitude. The method can also be used to obtain modes with similar computational advantage. The method works for fields of all azimuthal symmetries, i.e., one can treat all LPlm modes. In order to show the applicability of the method we have included examples on obtaining modes (LP and OAM) in step-index and ring core fibers (RCFs), propagation through a tapered RCF and computation of reflection spectra of few-mode fiber Bragg gratings (FM-FBGs).

Mitigating the Effects of Concave Damage by Adding a Lining Layer in a Ring-Core Fiber for Improving Propagation of Orbital Angular Momentum Modes

Mitigating the Effects of Concave Damage by Adding a Lining Layer in a Ring-Core Fiber for Improving Propagation of Orbital Angular Momentum Modes

Design and Fabrication of a Weakly-Coupled OAM Ring-Core Fiber Supporting 5-Mode-Group-Multiplexed MIMO-Free Transmission

Design and Fabrication of a Weakly-Coupled OAM Ring-Core Fiber Supporting 5-Mode-Group-Multiplexed MIMO-Free Transmission