Rift Research Articles

Exploring the orogenic nature of the Cariris Velhos event (ca. 1000-920 Ma) of the Borborema Province (NE Brazil)

The Cariris Velhos event (ca. 1000-920 Ma) is a significant marker in the early Neoproterozoic lithospheric record of the Borborema Province in NE Brazil. Despite its importance, the nature of this event remains unresolved having been linked to either continental rifting or accretionary-collisional orogeny. In this study, we support a compressive setting for the Cariris Velhos event based on compiled geochemical and isotopic data (Sm–Nd and Lu–Hf) from metagranitic rocks in the Alto Pajeú Terrane (central Borborema) and in the Pernambuco-Alagoas Super Terrane, as well as in the Riacho do Pontal and Sergipano fold belts (Southern Borborema). Geochemistry of these rocks share similarities with calcic to alkali-calcic and ferroan magmas, along with some Cordilleran magnesian members. They also correspond to meta-to peraluminous I- and S-type granitic rocks. Trace element distribution on spider diagrams reveals negative anomalies of HFSE (high field strength elements) such as Nb and Ta, which are typically associated with subduction-related settings. Additionally, chondrite normalized REE (rare-earth element) diagrams indicate mixing of both crustal and mantle material. Tectonic discriminant diagrams using elements with low mobility supports the hypothesis of a continental margin subduction-related setting. Calculated εNd and εHf values vary from negative to slightly positive, suggesting contributions from juvenile inputs and reworking of Meso-Paleoproterozoic crust, as indicated by the associated TDM model ages. Although the nature of the Cariris Velhos event requires further investigation, we suggest that, at least partially, it corresponded to an orogenic episode that might have occurred concurrently with continental break-up, similar to modern continental arc-retro arc foreland settings.

Impact of structural geometry of tilted fault blocks on hydrocarbon entrapment and deposition of syn-rift clastic reservoirs: Belayim Marine field (Gulf of Suez rift)

Belayim Marine oilfield is representative of the Gulf of Suez fields with hydrocarbon production from pre-rift and syn-rift reservoirs. Detailed subsurface mapping using a complete 3D seismic and borehole dataset throws light on the trapping mechanisms of tilted fault blocks in rift basins where the strike of the tilted block is parallel to the bounding fault. For such one-way tilted fault traps, linkage of rift-parallel and rift-oblique faults at the updip sides of the tilted blocks is necessary for trap integrity of laterally continuous reservoirs like the Nubia Sandstone. For laterally discontinuous reservoirs like tidal sand bars aligned normal or oblique to the block-bounding faults, a combination trap can be laterally closed by lateral change in facies of the reservoir unit along fault strike. Fault sealing of the proved hydrocarbon traps is mainly through juxtaposition. Shale smearing is valid for thick shale units with reasonable fault displacement and shale gouge is a proven sealing mechanism especially in clay-rich units. The ductile nature of syn-rift sediments leads to fault-propagation folding above the main-bounding faults of tilted fault blocks where folding is the trapping mechanism of these syn-rift reservoirs.The structural geometry of tilted fault blocks also controls the distribution of syn-rift reservoirs as the linkage of rift-parallel and rift-oblique faults controls the entry of main valleys transporting syn-rift clastics into the basin. Longitudinal depressions sculptured at the crests of tilted fault blocks represent another location for deposition of syn-rift reservoirs.

Theory of continental drift – causes of the motion. Outline of the theory

The theory of mantle convection currents as the cause of lithospheric plate movements has several major problems, including the absence of an adequate energy source. As shown in our previous contribution, an unbiased interpretation of geochemical data does not support the assumptions of a significant amount of radionuclides in the lower mantle or even in the core. It is our assertion that solar radiation is the primary energy source in the lithosphere. This energy is converted into mechanical energy via thermoelastic waves, even in depths with minimal temperature fluctuations. This has been confirmed by various methods of continuous stress measurement. The periodic and quasiperiodic thermoelastic reversible deformations, such as the circadian and annual cycles (including tidal periods), can also cause irreversible deformations due to the ratcheting mechanism. The 2D model showed that the strength limit is exceeded in 0.3 % of all diurnal cycles during the year. As a consequence, continents tend to extend while the oceanic lithosphere is pushed and overthrusted between continents. The middle-ocean ridges, similar to continental rifts, are filled by ascending magma which is one example of the ratcheting mechanism. The final plate movements are determined by the distribution of major continents and the overall westward drift of the lithosphere, which is slower for deep-rooted plates like the Indian one. Large asteroid impacts are important triggers (and possibly significant energy sources) of discrete events, like the formation of hotspots and large igneous provinces.

Intraoceanic Subduction System Within the Neo‐Tethys: Evidence From Late Cretaceous Arc Magmatic Rocks of the Eastern Himalaya

AbstractThe tectonic evolution of the Neo‐Tethys Ocean remains highly controversial, with several models existing in the community that conflict with each other. Here, we present new geochronologic and geochemical data for orthogneisses and amphibolites from the Greater Himalayan Sequence, eastern Himalayan orogen, which indicate that these rocks have Cenozoic metamorphic ages (∼52–3 Ma), but were derived from Late Cretaceous (∼89 Ma) magmas with arc‐like and depleted mantle geochemical signatures. Considering that northern India was a passive continental margin during the Mesozoic, and the previously reported Late Cretaceous magmatic rocks in the eastern Himalaya formed in a continental rifting setting, we suggest that the studied Late Cretaceous arc‐type magmatic rocks formed in an intraoceanic arc setting within the Neo‐Tethys, and accreted onto the passive margin of the Indian continent prior to the terminal continental collision. When combined with the existence of Late Mesozoic and intraoceanic arc‐type magmatic rocks in the western Himalaya, we suggest that a huge Late Cretaceous subduction system operated within the eastern Neo‐Tethys Ocean. This study supports two subduction zones having been responsible for the consumption and closure of the Neo‐Tethys basin, and a two‐stage collision history between India, Asia, and the intermediate island arc system. Our data therefore provide important constraints on the evolution of the Neo‐Tethys Ocean and India‐Asia collisional orogeny in southern Tibet.

Exploring the Geoheritage and Geosites of Jaramara Area, Kachchh, India: a Window into the Mesozoic Rift Basin

Exploring the Geoheritage and Geosites of Jaramara Area, Kachchh, India: a Window into the Mesozoic Rift Basin

Geological Structure and Dynamics of the Yinggehai Active Rift Basin, South China Sea

Geological Structure and Dynamics of the Yinggehai Active Rift Basin, South China Sea

GEODYNAMIC REGIMES IN THE LAPTEV SEA REGION ACCORDING TO THE LATEST SEISMOLOGICAL DATA

The results of the analysis of focal mechanisms and the general distribution of earthquake epicenters in the Laptev Sea region were presented. For four groups of clusters of events with known focal mechanisms, the directions of the principal stress axes were calculated by the formal stress inversion method. The distributions of earthquake epicenters and crustal thickness were compared. It has been revealed that, according to seismological data, the prolongation of the extension axis of the Gakkel Ridge on the Laptev Sea shelf is currently located in the vicinity of the group of extension detachments, which is extended along the eastern boundary of the Anisin, Zarya, and Belkovsko-Svyatonossky rift chains. The older extension axis, located along the group detachments marking the eastern boundary of the Ust-Lena and Omoloy rift systems, and continuing the axis of the Gakkel Ridge, is currently much less active, realizing residual stresses near its intersection with the Khatanga-Lomonosov fault zone in the northwestern parts of the shelf and with the Lena-Taimyr zone of boundary uplifts – in the southwestern. Near the Lena delta extension axes are oriented along the Olenekskaya and Bykovskaya channels and the border of the Siberian Platform, forming the extension conditions in the eastern part and the strike-slip regime in the western part of the vicinity of the Lena delta.

Evolution processes and diagenetic response of paleo-pore fluids in continental rift basin: A case study of Bonan Sag

Evolution and transport processes of pore fluids are accompanying with the burial process of sedimentary basins. Those processes lead to redistribution of materials and energies, and control the distribution of favorable reservoirs in sedimentary basins too. For petroliferous basins, confirming the evolution processes of pore fluids is useful for favorable reservoirs prediction. In this study, formation waters chemistry characteristics, skeleton particle compositions, and diagenetic products of sandstones were all take into consideration. It is to invert the evolution processes of pore fluids in continental rift basin. This study shows the changes of formation waters, diagenetic products and skeleton particle compositions are regularly with depth. The evolution processes of pore fluids are mainly controlled by basin sinking and uplifting, fluids concentration, mudstones compaction, organic matter evolution, diagenesis. The evolution of pore fluids in Bonan Sag have experienced seven stage: firstly, primary lake water; and then alkaline fluids from mudstone, which is caused by compaction; and then acidic fluids with organic acids; and then the alkaline fluids, which is caused by basin uplifting and water-rock interactions; and then acidic fluids with CO2, which is from cracking of organic matters; and then acidic fluids with CO2/H2S which caused by TSR; at last, alkaline fluids caused by deep buried and water-rock interactions. Changes of pore fluids (physical or chemical) lead parts of minerals in sandstones be unstable, and then dissolved by pore fluids. At the same time, part of dissolved particles in pore fluids reacted with each other, and then precipitated as diagenetic products.

Methodology for quantitative prediction of low-order faults in rift basins: Dongtai Depression, Subei Basin, China

In eastern China, oil and gas reservoirs mainly have fault block traps. Low-order, small-scale faults are well developed, with small fault displacements and short extension lengths, but are difficult to identify by traditional seismic methods. Based on paleotectonic interpretations, rock mechanics experimental results and stratigraphic data, combined with seismic interpretation, structural evolution and fault activity analysis, a geomechanical model of the Majiazui area in the Dongtai Depression in the Subei Basin is established to construct a three-dimensional model of the paleostress field. Finally, the control of the principal stress, shear stress, and strain energy on the occurrence and development of low-order faults is quantitatively analyzed. This research shows that fault activity was weak during the Funing period (65-53 Ma), became strong during the Dainan period (53-46 Ma) and was strongest during the Sanduo period (46-37 Ma). The Sanduo period was the main period during which the low-order faults in the Majiazui area were formed. The minimum principal stress and strain energy controlled the development of low-order faults in the Majiazui area. The low-order faults are most developed in areas that experience high minimum principal stress and strain energy. In the Sanduo period, the minimum principal stress in the Majiazui area was tensile in the north–south direction, and the maximum principal stress was vertical. In an extensional stress environment, lateral shear stress controls the strike of faults, while vertical shear stress controls the inclination of faults. The faults in the northern Majiazui area are inclined mainly to the south, and the faults in the southern Majiazui area are inclined mainly to the north. These results are of practical importance for evaluating the oil–water relationship in oil-bearing fault blocks, solving the conflict between injection and production wells and improving oil recovery.

Tectonic-sedimentary evolution in a Palaeocene rifted Lishui Sag, East China Sea Shelf Basin

Influenced by episodic tectonic activity and multiple sediment sources, the source-to-sink systems in rifted basins are relatively complex. Based on seismic data, well logging, cores, thin sections, and heavy mineral data, the growth and linkage of the Lingfeng fault were reconstructed and its influence on the sedimentary responses of the Palaeocene-rifted Lishui Sag in the East China Sea Shelf Basin was examined. The researchers conducted a fault throw-distance analysis on the Lingfeng fault and found that it displayed an overall weak-strong-weak evolutionary process. During the early syn-rift stage, the Lingfeng fault exhibited a segmented geometry consisting of seven fault segments with low fault activity along its strike, and small-scale source-to-sink systems developed in both the hanging wall dip-slope and footwall. As the main syn-rift stage progressed, strong fault activity induced large-scale exposure of the source area, resulting in a high sediment-supply rate and large-scale source-to-sink systems. During the late syn-rift stage, the fault weakened and evolved into a connected basin-boundary fault, and proximal source-to-sink systems in the footwall gradually disappeared. Semi-quantitative measurements of the geomorphic parameters of these source-to-sink systems indicated wide and shallow sediment transport pathways in hanging wall dip-slope areas (average width and depth of approximately 6.34 kmand 0.13 km, respectively) and narrow and deep sediment transport pathways in the footwall (average width and depth of approximately 3.75 km and 0.15 km, respectively). The semi-quantitative statistical analysis implies that the cross-sectional area of the transport channels was positively correlated with the corresponding fan/delta complexes in a rift basin.

Ancient silicic volcanism and incipient rift propagation during Gondwana breakup; geophysical insights from the Bumbeni ridge, South Africa

A detailed understanding of the association between magmatism and rift initiation is key to defining the prevailing tectonic conditions active during the initial break-up of Gondwana. The Bumbeni Complex in northern KwaZulu-Natal, South Africa represents an early Cretaceous silicic volcanic centre exposed at the southwestern termination of a linear zone of magnetic anomalies which are buried beneath sedimentary cover. Newly acquired high resolution aeromagnetic data combined with legacy seismic and borehole data is analysed to define the structural architecture of the basement beneath the Zululand Basin in northern KwaZulu-Natal. Multiple prominent positive and negative anomalies ranging from −200 nT to +300 nT based on International Geomagnetic Reference Field (IGRF) and corrected Reduced to Pole (RTP) data are resolved and form a distinct geophysical lineament. Geophysical and borehole core data indicate that the lineament represents a chain of silicic central volcanoes developed as a ridge feature, the Bumbeni Ridge, along the axial zone of an incipient rift structure. Detailed geological mapping and high resolution geophysical data are analysed and compared with analogous contemporary continental rift environments, as well as published data within the adjacent offshore Northern Natal Valley. Results are presented which propose a continental rift evolutionary model for Gondwana breakup in the Zululand Basin in northern KwaZulu-Natal.

O–Hf isotope ratios of Alvand S-type granite, western Iran, reveal crustal melting in an extensional regime

There are a few intrusive bodies in the central Sanandaj-Sirjan Zone (C-SaSZ), which is parallel to the Zagros suture zone, in western Iran. The Alvand batholith in the Hamedan area is one of these bodies and consists of rock types with large variation, in particular, two-mica garnet-bearing granite with an S-type signature. Zircon UPb dating gives crystallization ages of 170–163 Ma for the S-type granite. The 176Hf/177Hf ratios in the zircon grains vary from 0.282001 to 0.282780 (rim), with low 176Lu/177Hf ratios (0.002 to 0.018). The εHf(t) values (rim) are clustered into two main groups: a negative εHf(t) group (−6.9 to 0.0, n = 39), with some highly negative εHf(t) values (−25.8 to −21.9, n = 3), and slightly positive εHf(t) values (+0.3 to +2.9, n = 14) of inherited grains. The δ18O values for the zircon grains are positive and range from +10.4‰ to +11.8‰. The high δ18O (positive) and mostly negative εHf(t) values are more consistent with continental crustal sources for these rocks, and the Hf model ages (TDM2) show a wide range from 2.7 to 0.8 Ga, suggesting the heterogeneity of the crustal components. The long incubation time (2089 to 544 Ma) indicates a long history of crustal residence and crustal reworking. The incubation age of the zircon grains, >300 Ma, confirms the recycling of crustal material by partial melting. The simultaneous occurrence of S-type granites with mafic bodies, such as gabbro and diorite members with tholeiitic signatures, suggests that the injection of mafic magma increased the geothermal gradient from the bottom and sides along the major faults, which was the trajectory for the injection of hot mafic melts to shallow depths. These processes abnormally increased the geothermal gradients locally, and the partial melting of crustal and supracrustal materials produced S-type granites and migmatization among the hot blade-shaped mafic bodies. Therefore, the partial melting of crustal material in an extensional tectonic regime and/or in a thin continental crust occurred in a continental rift and/or in the Neo-Tethys passive margin. The present work concludes that the passive margin can be suggested as the tectonic setting for the generation of S-type granites, without the collisional regime that has been widely considered for the sources of this type of granite in the world.

The search for “Jenyon’s Channel”: The missing link between the Permian basins in the North Sea

The Mid North Sea High (MNSH) Seaway, otherwise known as Jenyon's Channel, was the only major marine connection between the Northern and Southern Zechstein Basins during the latest Permian. Current understanding favours a model where marine replenishment began with a northern connection to the Panthalassic Ocean (along a network of basins that were precursors to the North Atlantic Rift System), after which marine water passed into the Northern Zechstein Basin, travelled through the MNSH Seaway before finally reaching the Southern Zechstein Basin. This study delineates evaporite formations in an extensive petrophysical dataset to analyse marine connections and whether they influenced Zechstein facies distribution. The first four Zechstein Cycles (Z1-Z4) are identified on the MNSH platform which shows that this structure was always covered by a thin water column during sea-level highstand; however, during Z2 sea-level lowstand, the MNSH Seaway provided the main connection between the basins. As relative sea-level fell, the MNSH Seaway became increasingly constricted resulting in hypersalinity due to limited volumes of marine water reaching the Southern Zechstein Basin. This system precipitated vast volumes of Z2 (late Wuchiapingian) halite in the Southern Zechstein Basin, whereas this facies remains reduced in the Northern Zechstein Basin. In Z3 and Z4 (Changhsingian) times relative average sea-level was higher resulting in sustained communication between the basins, even in times of sea-level lowstand. This is evidenced through a regionally traceable blanket of Z3 halite, along with occasional examples of Z2 carbonate platforms becoming entombed in Z3 halite. This work provides revised palaeoenvironmental understanding for the latest Permian. The workflow could also aid in the study of other oceanic gateways with further implications for hydrocarbon exploration efforts and emerging energy transition technologies such as subsurface storage on the UK Continental Shelf.

Maastrichtian – Paleocene environmental and climatic conditions in Koum Basin (northern benue trough, Cameroon) inferred using a multiproxy approach including sedimentology, mineralogy, and geochemistry

The Koum Basin is one of major intracontinental basins in northern Cameroon. It is part of the Upper Benue Trough and has genetic ties to the West and Central African Rift System. The main purpose of studying the Koum Basin sedimentary deposits was to re-examine the time of the deposition and constrain the palaeoenvironmental and paleoclimatic conditions during deposition. To accomplish this, we used a combination of sedimentologic, palynologic, mineralogic, and geochemical data. Claystone units interbedded with calcareous siltstones dominate sedimentary sequence, including few clay beds, fine to medium-grained sandstone, and rare marl layers. The palynomorph assemblage suggests a previously unknown Maastrichtian – Paleocene age in this basin. The sediments originated from intermediate igneous parent rocks with a relative contribution of felsic rocks. These rocks underwent low detritism (Si/Al: 2.51–4.43; K/Al: 0.11–0.36; Ti/Al: 0.05–0.10) and chemical weathering (CIA: 55–64; PIA: 56–68) in the source region. Consequently, deposits are immature (ICV values > 1) and weakly recycled (Si2O3/Al2O3 ratios ≤5). The organic matter analysis and the palynoflora assemblage, reveal Type III kerogen with significant contributions of Type II-III and type II kerogens, as well as a continental paleo-depositional environment with open rainforest to savannah vegetation. The clay minerals distribution suggests moderate illitization and chloritization processes and thus moderate burial diagenesis at temperatures ranging from 70 to 90 °C, also attested by immature to mature Tmax values (≤436 °C) marginally. The low CIA values and very low kaolinite contents, indicate dry climatic conditions. In addition, two major-element-based discrimination diagrams show that the parent rocks of clastic sediments formed primarily in a continental arc system, with a moderate contribution from the rift system and a low contribution from the oceanic island arc, implying compressional conditions, which is consistent with previous studies on the tectonic background of the region during the late Maastrichtian to Paleocene period.

High-Nb alkaline mafic dykes in the central Alps witness to the Triassic evolution of the Adria passive margin

The Edolo diabase dykes intruded the Variscan basement in the central Southalpine domain. Biotite 40Ar / 39Ar dating shows that the emplacement occurred during the final stage of Permian-Triassic lithospheric thinning. In this phase on the Adria passive margin, middle Triassic magmatism with disputed arc affinity is followed by a late Triassic alkaline event associated with continental rifting. The Edolo diabase dykes are Ti-rich and alkaline, with high Nb and Ta contents and ratios in igneous amphibole, biotite, and ilmenite. These features are typical of the late Triassic magmatism. In contrast, the early-crystallized clinopyroxene shows low Nb and Ta contents and ratios and an apparent arc affinity may be thus envisaged in the clinopyroxene parental melt. However, given the coexistence of both features in the same dykes, their composition cannot be interpreted in terms of transition between tectonic environments. Instead, it is likely attributed to the heterogeneity of the Adriatic lithosphere inherited from the Variscan to Permian evolution, which underwent asthenospheric upwelling due to Permian-Triassic extensional tectonics.

Continental rift asymmetry and segmentation – contributions from the African plate

Prior to the mid-1980s, continental rifts were generally depicted as roughly symmetrical graben, with little complexity along the strike of the basin. In reality, most continental rifts originate as asymmetric, large-scale half graben that are strongly segmented along-strike. This basic architecture does not usually persist unaltered to the rift-to-drift transition but can commonly be observed in both failed continental rift systems and along the passive margins of oceanic plates where rifting succeeded. These geometric aspects of continental rifting have fundamental implications for both hydrocarbon exploration and understanding the causes and processes of continental rupture. Contributions to our understanding of rift asymmetry and segmentation have spanned the past seven decades and come from many settings around the world. However, Africa has played a key role in this undertaking, due to both the presence of well-exposed, active extensional basins in the Afro-Arabian rift system and numerous buried Mesozoic and early Cenozoic rift systems.The first well-documented examples of both rift asymmetry and along-strike segmentation occurred in the Gulf of Suez, northern Egypt, in the 1970s. These early ideas were greatly enhanced and expanded by later studies in both the Western and Eastern branches of the East Africa Rift, including field and refraction/reflection seismic work in Burundi, the Democratic Republic of the Congo, Ethiopia, Kenya, Malawi, Tanzania, and Uganda during the 1980s and 1990s. Asymmetry and segmentation were recognized to be fundamental characteristics of both magmatic and amagmatic rifts, although important differences regarding scale and temporal evolution are evident. At smaller scales, hard-linkage of growing and interacting extensional faults was another key component of subsurface interpretation in the Gulf of Suez by the mid-1970s. Later, outcrop studies in East Africa, supported by subsurface seismic and well data, led to greatly improved models of syn-tectonic sedimentation in step with the advances in understanding of structural geometries. Most recently, concepts derived from the continental margins of other plate settings have been incorporated with the earlier African observations to produce new models of the tectonic evolution of the Red Sea and Gulf of Aden, which in turn has then influenced our overall understanding of the progression from continental to oceanic rifting. This is an ongoing topic of research and discussion that will certainly proceed for many years and require the collaboration of both the international scientific community and local African earth science expertise.

Late Quaternary deformation in the western extension of the North Anatolian Fault (North Evia, Greece): Insights from very high-resolution seismic data (WATER surveys)

Since the Pliocene, rift basins have developed in the North Evia region at the south-western extension of the North Anatolian Fault. North Evia, therefore, is a key area for investigating Plio-Quaternary deformation within the diffuse Anatolian-Aegean–Eurasian plate boundary. In this study, we present a detailed map of offshore faults in the North Evia region based on three seismic reflection surveys: an airgun (2004) and two very high-resolution Sparker (2017 and 2021) single-channel surveys. Careful and systematic interpretation of these datasets revealed i) the identification of a new basin (Skiathos Basin) located at the western extension of the North Anatolian Fault and ii) two main fault sets striking oblique to the active N–S-directed extension. The seismicity analysis of the study area reveals pure strike-slip displacements along faults previously identified as normal. The NW–SE-striking faults bordering the North Evia Gulf rift are characterised by left-lateral displacements, and the NE–SW faults present dextral focal mechanisms, following the kinematic character of the North Anatolian Fault. We show that dextral strike-slip deformation recently occurred (in the late Quaternary) in the south-western extension of the North Anatolian Fault, suggesting the significant role of this fault system in the complex structural development of the North Evia region.

Early Eocene Arctic volcanism from carbonate-metasomatized mantle

Melilitite, nephelinite, basanite, and alkali basalt, along with phonolite differentiates, form the Freemans Cove Complex (FCC) in the south-eastern extremity of Bathurst Island (Nunavut, Canada). New 40Ar/39Ar chronology indicates their emplacement between ~ 56 and ~ 54 million years ago within a localized extensional structure. Melilitites and nephelinites, along with phonolite differentiates, likely relate to the beginning and end phases of extension, whereas alkali basalts were emplaced during a main extensional episode at ~ 55 Ma. The melilitites, nephelinites, and alkali basalts show no strong evidence for significant assimilation of crust, in contrast to some phonolites. Partial melting occurred within both the garnet- and spinel-facies mantle and sampled sources with He, O, Nd, Hf, and Os isotope characteristics indicative of peridotite with two distinct components. The first, expressed in higher degree partial melts, represents a relatively depleted component (“A”; 3He/4He ~ 8 RA, εNdi ~ + 3 εHfi ~ + 7, γOsi ~ 0). The second was an enriched component (“B” 3He/4He < 3 RA, εNdi < – 1 εHfi < + 3, γOsi > + 70) sampled by the lowest degree partial melts and represents carbonate-metasomatized peridotite. Magmatism in the FCC shows that rifting extended from the Labrador Sea to Bathurst Island and reached a zenith at ~ 55 Ma, during the Eurekan orogeny. The incompatible trace-element abundances and isotopic signatures of FCC rocks indicate melt generation occurred at the base of relatively thin lithosphere at the margin of a thick craton, with no mantle plume influence. FCC melt compositions are distinct from other continental rift magmatic provinces worldwide, and their metasomatized mantle source was plausibly formed synchronously with emplacement of Cretaceous kimberlites. The FCC illustrates that the range of isotopic compositions preserved in continental rift magmas are likely to be dominated by temporal changes in the extent of partial melting, as well as by the timing and degree of metasomatism recorded in the underlying continental lithosphere.

Metallogenic Mechanism of Carlin-Type Gold Deposit in Zhen’an-Xunyang Basin, in the South Qinling of China: Constraints of In Situ Trace Elements and S Isotopes from Newly Discovered Wangzhuang Gold Deposit

The Zhen’an-Xunyang Basin is a late Paleozoic rifted basin with a series of Au-Hg-Sb deposits that have been found, mostly along the Nanyangshan fault. Recently discovered large- and medium-sized gold deposits such as the Xiaohe and Wangzhuang deposits exhibit typical characteristics of Carlin-type gold deposits. Therefore, it is imperative to select a typical deposit for an in-depth study of its metallogenic mechanism to support future prospecting efforts targeting the Carlin-type gold deposits within the area. Based on detailed field investigation and microphotographic observation, four ore-forming stages are identified: I, low-sulfide quartz stage, characterized by euhedral, subhedral pyrite, and fine veins of quartz injected parallel to the strata; II, arsenopyrite–arsenian pyrite–quartz stage, the main mineralization stage characterized by strongly silicified zones of reticulated quartz, disseminated arsenopyrite, fine-grained pyrite; III, low-sulfide quartz stage, characterized by large quartz veins cutting through the ore body or fine veins of quartz; Ⅳ, carbonate–quartz stage, characterized by the appearance of a large number of calcite veins. In situ analysis of trace elements and S isotopes of typical metal sulfides was carried out. The results show significant variations in the trace element compositions of metal sulfides in different stages, among which the main mineralization stage differs notably from those of the Au- and As-low surrounding strata. In situ S isotope analysis reveals δ34S values ranging from 15.78‰ to 28.71‰ for stage I metal sulfides, 5.52‰ to 11.22‰ for stage II, and 0.3‰ to 5.25‰ for stage III, respectively, revealing a gradual decrease in S isotopic values from the pre-mineralization stage to post-mineralization stage, similar to those observed in the Xiaohe gold deposit. These features indicate a distinct injection of relatively low 34S hydrothermal fluids during the mineralization process. The element anomalies of the 1:50,000 stream sediment in the region revealed ore-forming element zonation changing in W→Au (W)→Hg, Sb (Au) anomalies from west to east, manifested by the discovery of tungsten, gold, and mercury–antimony deposits in the area. Moreover, conspicuous Cr-Ni-Ti-Co-Mo anomalies were observed on the western side of the Wangzhuang and Xiaohe gold deposits, indicating a potential concealed pluton related to these deposits. These lines of evidence point to a magmatic–hydrothermal origin for the Carlin-type gold deposits in this area. Furthermore, hydrothermal tungsten deposits, Carlin-type gold deposits, and low-temperature hydrothermal mercury–antimony deposits in this region are probably controlled by the same magma–hydrothermal system.

Petrography and geochemistry of sandstones of the Ash Shumaysi Formation in the Jeddah-Makkah region, Saudi Arabia: Implications for provenance, tectonic setting, paleoweathering, paleoclimate and paleogeography

This study aims to evaluate the provenance of sandstones of the Ash Shumaysi Formation (Early Eocene to Oligo-Miocene) exposed in the Jeddah-Makkah region (an intra-continental cratonic region in the west of the central part of the Arabian Shield), in addition to re-establish the tectonic setting, paleoclimate and paleo-weathering of their source rocks. This aim has been achieved by petrographic investigation and geochemical (major, trace and rare earth elements) analysis of the sandstones. Integration of both petrographic and geochemical data reflects a derivation of the sandstones from intensively-weathered and multi-recycled felsic igneous (granites) rocks, with a minor contribution of intermediate (granodiorite), mafic igneous (andesite), metamorphic (mainly gneisses) and recycled sedimentary rocks, which correspond to the Precambrian rock units of the west of the central part of the Arabian Shield. The latter was developed under semi-humid climatic conditions in the source area. Tectonically, the source rocks are of a cratonic interior in a passive continental margin of the Upper Continental Crust. This passive continental margin was later affected by rifting as revealed from the discrimination function diagrams of high-silica samples of sandstones. In general, the Ash Shumaysi sandstones may represent erosional products of the nearby high-topographic crystalline rocks of the Western Arabian Shield that were located in a tectonically stable passive margin subjected to a subsequent continental rift. Results of this study could add to the knowledge about paleoweathering, paleoclimate and tectonic setting in the Arabian Shield which is a part of the southern margin of the broad stable continental shelf of the northern margin of the Gondwana supercontinent.