Rhizopus Oryzae Glucoamylase Research Articles

Enhanced cell-surface display and secretory production of cellulolytic enzymes with Saccharomyces cerevisiae Sed1 signal peptide.

Recombinant yeast strains displaying aheterologous cellulolytic enzymes on their cell surfaces using a glycosylphosphatidylinositol (GPI) anchoring system are a promising strategy for bioethanol production from lignocellulosic materials. A crucial step for cell wall localization of the enzymes is the intracellular transport of proteins in yeast cells. Therefore, the addition of a highly efficient secretion signal sequence is important to increase the amount of the enzymes on the yeast cell surface. In this study, we demonstrated the effectiveness of a novel signal peptide (SP) sequence derived from the Saccharomyces cerevisiae SED1 gene for cell-surface display and secretory production of cellulolytic enzymes. Gene cassettes with SP sequences derived from S. cerevisiae SED1 (SED1SP), Rhizopus oryzae glucoamylase (GLUASP), and S. cerevisiae α-mating pheromone (MFα1SP) were constructed for cell-surface display of Aspergillus aculeatus β-glucosidase (BGL1) and Trichoderma reesei endoglucanase II (EGII). These gene cassettes were integrated into the S. cerevisiae genome. The recombinant strains with the SED1SP showed higher cell-surface BGL and EG activities than those with the conventional SP sequences (GLUASP and MFα1SP). The novel SP sequence also improved the secretory production of BGL and EG in S. cerevisiae. The extracellular BGL activity of the recombinant strains with the SED1SP was 1.3- and 1.9-fold higher than the GLUASP and MFα1SP strains, respectively. Moreover, the utilization of SED1SP successfully enhanced the secretory production of BGL in Pichia pastoris. The utilization of the novel SP sequence is a promising option for highly efficient cell-surface display and secretory production of heterologous proteins in various yeast species. Biotechnol. Bioeng. 2016;113: 2358-2366. © 2016 Wiley Periodicals, Inc.

Crystal structures of starch binding domain from Rhizopus oryzae glucoamylase in complex with isomaltooligosaccharide: Insights into polysaccharide binding mechanism of CBM21 family

Glucoamylases are responsible for hydrolysis of starch and polysaccharides to yield β-D-glucose. Rhizopus oryzae glucoamylase (RoGA) is composed of an N-terminal starch binding domain (SBD) and a C-terminal catalytic domain connected by an O-glycosylated linker. Two carbohydrate binding sites in RoSBD have been identified, site I is created by three highly conserved aromatic residues, Trp47, Tyr83, and Tyr94, and site II is built up by Tyr32 and Phe58. Here, the two crystal structures of RoSBD in complex with only α-(1,6)-linked isomaltotriose (RoSBD-isoG3) and isomaltotetraose (RoSBD-isoG4) have been determined at 1.2 and 1.3 Å, respectively. Interestingly, site II binding is observed in both complexes, while site I binding is only found in the RoSBD-isoG4 complex. Hence, site II acts as the recognition binding site for carbohydrate and site I accommodates site II to bind isoG4. Site I participates in sugar binding only when the number of glucosyl units of oligosaccharides is more than three. Taken together, two carbohydrate binding sites in RoSBD cooperate to reinforce binding mode of glucoamylase with polysaccharides as well as the starch.

Crystal structures of the starch-binding domain from Rhizopus oryzae glucoamylase reveal a polysaccharide-binding path

GA (glucoamylase) hydrolyses starch and polysaccharides to beta-D-glucose. RoGA (Rhizopus oryzae GA) consists of two functional domains, an N-terminal SBD (starch-binding domain) and a C-terminal catalytic domain, which are connected by an O-glycosylated linker. In the present study, the crystal structures of the SBD from RoGA (RoGACBM21) and the complexes with beta-cyclodextrin (SBD-betaCD) and maltoheptaose (SBD-G7) were determined. Two carbohydrate binding sites, I (Trp(47)) and II (Tyr(32)), were resolved and their binding was co-operative. Besides the hydrophobic interaction, two unique polyN loops comprising consecutive asparagine residues also participate in the sugar binding. A conformational change in Tyr(32) was observed between unliganded and liganded SBDs. To elucidate the mechanism of polysaccharide binding, a number of mutants were constructed and characterized by a quantitative binding isotherm and Scatchard analysis. A possible binding path for long-chain polysaccharides in RoGACBM21 was proposed.

Improvement in enzymatic desizing of starched cotton cloth using yeast codisplaying glucoamylase and cellulose-binding domain

To utilize glucoamylase-displaying yeast cells for enzymatic desizing of starched cotton cloth, we constructed yeast strains that codisplayed Rhizopus oryzae glucoamylase and two kinds of Trichoderma reesei cellulose-binding domains (CBD1, CBD of cellobiohydrolase I (CBHI); and CBD2, CBD of cellobiohydrolase II (CBHII)). In this study, we aimed to obtain a high efficiency of enzymatic desizing of starched cotton cloth. Yeast cells that codisplayed glucoamylase and CBD had higher activity on starched cotton cloth than yeast cells that displayed only glucoamylase. Glucoamylase and double CBDs (CBD1 and CBD2) codisplaying yeast cells exhibited the highest activity ratio (4.36-fold), and glucoamylase and single CBD (CBD1 or CBD2) codisplaying yeast cells had higher relative activity ratios (2.78- and 2.99-fold, respectively) than glucoamylase single-displaying cells. These results indicate that the glucoamylase activity of glucoamylase-displaying cells would be affected by the binding ability of CBD codisplayed on the cell surface to starched cotton cloth. These novel strains might play useful roles in the enzymatic desizing of starched cotton cloth in the textile industry.

Construction of combinatorial library of starch-binding domain of Rhizopus oryzae glucoamylase and screening of clones with enhanced activity by yeast display method

Most of the glucoamylases (GA), which catalyze the hydrolysis of α-1,4 and α-1,6 glycosidic linkages, have a distinct region called a starch-binding domain (SBD). We have developed a powerful method for screening a library of GA mutants by a combination of GA display and SBD mutagenesis on the yeast-cell surface. In the case of Rhizopus oryzae glucoamylase (RoGA), three amino acids (63S, 71T, 73S) of the SBD were combinatorially mutated to enhance the degradation activity toward cooked corn starch and the mutated RoGAs were displayed on yeast-cell surface by cell-surface engineering. After the first screening by halo assay using an iodine-starch reaction, about 200 of the 8000 colonies formed clear halos. Incubation of the yeast with the mutated and displayed RoGAs caused direct degradation of cooked corn starch. Repeated screening revealed that some of the mutants produced a degradation rate around ∼1.4-fold higher than did wild type. The results obtained from the DNA sequences of the mutated SBDs indicated that amino-acid residues with a carbonyl group (D, E, Q, N) in the SBD enhance the degradation ability of the GA by enhancing the binding activity of the SBD.

Construction of engineered yeast with the ability of binding to cellulose

The genes encoding cellulose binding domain (CBD) from cellobiohydrolase I (CBHI) and cellobiohydrolase II (CBHII) of the filamentous fungus Trichoderma reesei were expressed on the cell surface of the yeast Saccharomyces cerevisiae by cell surface engineering. The CBD genes were fused to the gene encoding the Rhizopus oryzae glucoamylase secretion signal sequence, and expressed under the control of the glyceraldehydes-3-phosphate dehydrogenase (GAPDH) promoter. Each of CBDs was successfully displayed on the yeast cell surface by fusing their genes to the gene encoding the 3′-half of α-agglutinin of S. cerevisiae having a glycosylphosphatidylinositol anchor attachment signal. Tandemly aligned CBHI (CBD1) and CBHII (CBD2) fusion gene was also constructed to display simultaneously both CBDs on the cell surface of S. cerevisiae. Binding affinity of the CBD-displaying yeast cells to a cellulose substrate was similar between the CBD1- and CBD2-displaying yeast cells. However, the cells displaying the fusion protein of CBD1 and CBD2 showed much higher binding affinity to cellulose than either of the single CBD-displaying yeast cells. The binding affinity of the cells was increased by treating the cellulose with phosphoric acid.

Development of an arming yeast strain for efficient utilization of starch by co-display of sequential amylolytic enzymes on the cell surface.

The construction of a whole-cell biocatalyst with its sequential reaction has been performed by the genetic immobilization of two amylolytic enzymes on the yeast cell surface. A recombinant strain of Saccharomyces cerevisiae that displays glucoamylase and alpha-amylase on its cell surface was constructed and its starch-utilizing ability was evaluated. The gene encoding Rhizopus oryzae glucoamylase, with its own secretion signal peptide, and a truncated fragment of the alpha-amylase gene from Bacillus stearothermophilus with the prepro secretion signal sequence of the yeast alpha factor, respectively, were fused with the gene encoding the C-terminal half of the yeast alpha-agglutinin. The constructed fusion genes were introduced into the different loci of chromosomes of S. cerevisiae and expressed under the control of the glyceraldehyde-3-phosphate dehydrogenase promoter. The glucoamylase and alpha-amylase activities were not detected in the culture medium, but in the cell pellet fraction. The transformant strain co-displaying glucoamylase and alpha-amylase could grow faster on starch as the sole carbon source than the transformant strain displaying only glucoamylase.

Construction of a starch-utilizing yeast by cell surface engineering.

We have engineered the cell surface of the yeast Saccharomyces cerevisiae by anchoring active glucoamylase protein on the cell wall, and we have endowed the yeast cells with the ability to utilize starch directly as the sole carbon source. The gene encoding Rhizopus oryzae glucoamylase with its secretion signal peptide was fused with the gene encoding the C-terminal half (320 amino acid residues from the C terminus) of yeast alpha-agglutinin, a protein involved in mating and covalently anchored to the cell wall. The constructed plasmid containing this fusion gene was introduced into S. cerevisiae and expressed under the control of the glyceraldehyde-3-phosphate dehydrogenase promoter from S. cerevisiae. The glucoamylase activity as not detected in the culture medium, but it was detected in the cell pellet fraction. The glucoamylase protein transferred to the soluble fraction from the cell wall fraction after glucanase treatment but not after sodium dodecyl sulfate treatment, indicating the covalent binding of the fusion protein to the cell wall. Display of the fused protein was further confirmed by immunofluorescence microscopy and immunoelectron microscopy. The transformant cells could surely grow on starch as the sole carbon source. These results showed that the glucoamylase was anchored on the cell wall and displayed as its active form. This is the first example of an application of cell surface engineering to utilize and improve the metabolic ability of cells.