Reversed Electrode Polarity Research Articles

Development of Two-Dimensional Offline Coupling of Asymmetrical Flow Field-Flow Fractionation and Capillary Electrophoresis for the Separation of a Five-Component Submicrometer Particle Mixture.

Submicrometer colloidal particles are widely applied in a variety of industrial products. While precise size and surface charge control is crucial to the stability and functionality of these materials, a tool to determine these properties with sufficient resolution, detection sensitivity, and robustness is still not available. The recently reported offline coupling of asymmetrical flow field-flow fractionation and capillary electrophoresis (AF4 × CE) shows success in improving the separation resolution for nanoparticles; however, challenges remain for sensitive multiple-component submicrometer particle analysis because of wide size and mobility distributions. We here report offline coupling of an AF4 method and a CE method, which utilized the online reversed electrode polarity stacking mode, to successfully characterize a five-component, submicrometer particle mixture. The mixture was successfully separated and detected with an improved inter- and intracomponent resolution. Therefore, our developed platform holds great potential for industrial applications involving multiple-component particle mixtures.

CE Coupled to ICP-MS and Single Particle ICP-MS for Nanoparticle Analysis.

Capillary electrophoresis (CE) can be used for the separation of nanoparticles (NPs). Coupling of CE to inductively coupled plasma mass spectrometry (ICP-MS) or single particle (sp)-ICP-MS enhances the analytical performance and capabilities of the method compared to CE with a standard detector (ultraviolet visible spectroscopy), in particular for trace analysis of metals or metal-containing compounds. spICP-MS is a method for NP analysis, where a standard ICP-MS setup is used with fast time-resolved detection in order to obtain information on individual NPs. Here we describe a method for the separation and detection of silver and gold NPs using CE-ICP-MS and CE-spICP-MS with reversed electrode polarity stacking mode (REPSM) for online preconcentration. CE-spICP-MS allows obtaining the average size, size distribution, elemental composition, and particle number concentration (PNC) of NPs in addition to a CE separation profile in a single run. Moreover, CE-spICP-MS can be used in some cases to separate NPs with different coatings.

Implementation of Online Preconcentration and Microsecond Time Resolution to Capillary Electrophoresis Single Particle Inductively Coupled Plasma Mass Spectrometry (CE-SP-ICP-MS) and Its Application in Silver Nanoparticle Analysis.

Capillary electrophoresis (CE) coupled to single particle inductively coupled plasma mass-spectrometry (SP-ICP-MS) was used for the first time with a prototype data acquisition (μsDAQ) system that features 5 μs time resolution (100% duty cycle) to separate and quantify mixtures of silver nanoparticles (Ag NPs). Additionally, an online preconcentration technique, reversed electrode polarity stacking mode (REPSM), was applied for Ag NPs analysis with CE-SP-ICP-MS for the first time. After optimization, best results were achieved using a injection time of 110 s and a constant pressure of 50 mbar in hydrodynamic injection mode. It was possible to detect 14.3 ± 1.5× more 20 nm sized, 21.0 ± 4.2× more 40 nm sized, and 27.7 ± 4.9× more 60 nm sized Ag NPs compared to the standard injection time of only 3 s. The effect of applied voltage on the NPs separation was studied, and a CE separation at 20 kV was found to be optimal for the present setup. The capability of CE-SP-ICP-MS for quantification of particle number concentration was investigated, and detection limits in the submicrogram-per-liter range were achieved. The possibility to separate 20, 40, and 60 nm sized Ag NPs simultaneously present in a mixture was demonstrated over a broad concentration range.

Flexible conducting polymer transistors with supercapacitor function

Planar organic electrochemical transistors (OECTs) using PEDOT:PSS as the channel material and nanostructured carbon (nsC) as the gate electrode material and poly(sodium 4-styrenesulfonate (PSSNa) gel as the electrolyte were fabricated on flexible polyethylene terephthalate (Mylar®) substrates. The nsC was deposited at room-temperature by supersonic cluster beam deposition (SCBD). Interestingly, the OECT acts as a hybrid supercapacitor (to give a device that we indicate as transcap). The energy storage ability of transcaps has been studied with two cell configurations: one featuring PEDOT:PSS as the positive electrode and nsC as the negative electrode and another configuration with reversed electrode polarity. Potentiostatic charge/discharge studies show that both supercapacitors show good performance in terms of voltage retention, in particular, when PEDOT:PSS is used as the positive electrode. Galvanostatic charge–discharge characteristics show typical symmetric triangular shape, indicating a nearly ideal capacitive behavior with a high columbic efficiency (close to 100%). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016

Sample Stacking and On-Line Derivatization for the Analysisof Ampicillin and Amoxicillin by Microemulsion Electrokinetic Chromatography

A novel method using microemulsion electrokinetic chromatography (MEEKC) combining the preconcentration technique called reversed electrode polarity stacking mode (REPSM) with subsequent on-line derivatization has been developed for the quantitative determination of ampicillin and amoxicillin. It was found that the derivatization of antibiotics with 2,3-naphtalenedicarboxaldehyde (NDA) is accelerated greatly in microemulsion media, compared to the standard derivatization procedure, no heating being required. Various parameters that affect the ratio of derivatization, such as temperature, mixing and reaction time, concentration of NDA solution, and plug length were investigated and optimized. The combination of RESPM technique with the following derivatization allows the detection limits of ampicillin and amoxicillin to be decreased by a factor of 300 or more. The potential of the developed method was demonstrated by the determination of these antibiotics in a biological sample through the analysis of urine.

Analysis of phthalate esters in plastic-packaging bags by on-line sample stacking-microemulsion electrokinetic chromatography

Two convenient, effective, and reproducible methods using microemulsion electrokinetic chromatography (MEEKC)-normal stacking mode (NSM) and reversed electrode polarity stacking mode (REPSM) were developed for the on-line sample stacking of phthalate esters (PAEs). REPSM coupled with MEEKC increased the sensitivity of 937.5 to 7,143 times for four PAEs compared to the conventional MEEKC. The separating conditions in the MEEKC method were studied, and many factors influencing the two sample stacking processes were investigated in detail. The optimum sample matrices for the two stacking methods were as follows: 30 mmol/L sodium cholate (SC) and 30.0 mmol/L borate (pH 8.5). Additionally, sample injections as large as 3.45 kPa x 40 s and 3.45 kPa x 90 s were applied for NSM-MEEKC and REPSM-MEEKC, respectively. The linear relationship and reproducibility were also examined. Under the optimum conditions, the detection limits (S/N = 3) of the PAEs were in the ranges of 0.021 - 0.33 mg/L and 0.7 - 4 microg/L for NSM-MEEKC and REPSM-MEEKC, respectively. The proposed REPSM-MEEKC has been successfully applied to determine PAEs in plastic-packaging bags, and the spiked recoveries were in the range of 89.1% - 105.6% with satisfactory results.

Determination of organophosphorus pesticides using dispersive liquid–liquid microextraction combined with reversed electrode polarity stacking mode—micellar electrokinetic chromatography

A rapid and sensitive method using two preconcentration techniques, dispersive liquid–liquid microextraction (DLLME) followed by reversed electrode polarity stacking mode (REPSM) was developed for the analysis of five organophosphorus pesticides (OPPs) by micellar electrokinetic chromatography (MEKC). Parameters that affect the efficiency of the extraction in DLLME and preconcentration by REPSM, such as the kind and volume of the extraction and disperser solvents, salt addition, sample matrix and injection time were investigated and optimized. Under the optimum conditions, the enrichment factors were obtained in the range from 477 to 635. The linearity of the method for parathion, azinphos and fenitrithion was in the range of 20–1000ngmL−1, and for malathion and diazinon in the range of 50–1000ngmL−1, with correlation coefficients (r2) ranging from 0.9931 to 0.9992. The limits of detecton (LODs) at a signal-to-noice ratio of 3 ranged from 3 to 15ngmL−1. The relative recoveries of five OPPs from water samples at spiking levels of 20 and 200ngmL−1 for parathion, azinphos and fenitrithion, and 50 and 500ngmL−1 for malathion and diazinon, were 69.5–103%. The proposed method provided high enrichment factors, good precision and accuracy with a short analysis time.

High-sensitivity capillary electrophoresis method for monitoring purine nucleoside phosphorylase and adenosine deaminase reactions by a reversed electrode polarity switching mode

A simple, efficient, and highly sensitive in-line CE method was developed for the characterization and for inhibition studies of the nucleoside-metabolizing enzymes purine nucleoside phosphorylase (PNP) and adenosine deaminase (ADA) present in membrane preparations of human 1539 melanoma cells. After filling the running buffer (50 mM borate buffer, 100 mM SDS, pH 9.10) into a fused-silica capillary (50 cm effective length × 75 μm), a large sample volume was loaded by hydrodynamic injection (5 psi, 36 s), followed by the removal of the large plug of sample matrix from the capillary using polarity switching (−20 kV). The current was monitored and the polarity was reversed when 95% of the current had been recovered. The separation of the neutral analytes (nucleosides and nucleobases) was performed by applying a voltage of 15 kV. An about 10-fold improvement of sensitivity for the five investigated analytes (adenosine, inosine, adenine, hypoxanthine, xanthine) was achieved by large-volume stacking with polarity switching when compared with CE without stacking. For inosine and adenine detection limits as low as 60 nM were achieved. To the best of our knowledge, this represents the highest sensitivity for nucleoside and nucleobase analysis using CE with UV detection reported so far. The Michaelis–Menten constants ( K m) for PNP and ADA and the inhibition constants ( K i ) for standard inhibitors determined with the new method were consistent with literature data.

Extremely highly efficient on-line concentration and separation of gold nanoparticles using the reversed electrode polarity stacking mode and surfactant-modified capillary electrophoresis

In this study, gold nanoparticles (Au NPs) were separated using the reversed electrode polarity stacking mode (REPSM) of a capillary electrophoresis (CE) system for on-line enhancement prior to performing surfactant-modified CE separation. Under optimized conditions [running electrolyte buffer, sodium dodecyl sulfate (70 mM) and 3-cyclohexylamino-1-propanesulfonic acid (10 mM) at pH 10.0; applied voltage, 20 kV; operating temperature, 25 °C; REPSM strategy for sample on-line concentration; REPSM applied prior to initializing separation], two parameters were varied to further enhance the concentration and separation of the Au NPs: (i) the rate of polarity switching (from −20 to +20 kV) between the REPSM and surfactant-modified CE separation modes and (ii) the length of the capillary column. At a polarity switching rate of 1333 kV min −1 and a column length of ca. 83.5 cm, the resolution of the separation of a mixture of 5.3- and 40.1-nm Au NPs was greater than 19; in addition, the numbers of theoretical plates for the 5.3- and 40.1-nm-diameter Au NPs were greater than 15,000 and up to 1.15 × 10 7, respectively—the latter being extremely high. Thus, this CE-based method for separating Au NPs provided high performance in terms of separation resolution and the number of theoretical plates, both of which were improved by greater than fivefold relative to those published previously. Notably, the sensitivity enhancement factors for the 5.3- and 40.1-nm-diameter Au NPs were improved (by ca. 20- and 500-fold, respectively) relative to those obtained using conventional surfactant-modified CE separation.

Reversed Electrode Polarity Stacking Sample Preconcentration Combined with Micellar Electrokinetic Chromatography for the Analysis of Carbamate Insecticide Residues in Fruit Juices

Reversed electrode polarity stacking mode (REPSM) coupled to micellar electrokinetic chromatography (MEKC) was employed for the simultaneous determination of carbamate insecticide residues in fruit juice samples. A mixture of the studied insecticides (i.e., methomyl, propoxur, carbofuran, carbaryl, isoprocarb, and promecarb) in 10 mmol L−1 phosphate buffer (pH 7.0) was introduced into the capillary tube by hydrodynamic injection at 0.5 psi for 30 s followed by removal of the sample matrix at −15 kV for 0.5 min. The analytes were successfully separated within 8 min using 10 mmol L−1 borate buffer containing 60 mmol L−1 sodium dodecyl sulfate at pH 9.5, and photodiode array detection at 205, 214, and 225 nm. The REPSM–MEKC gave stacking enhancement factors of about 4–13, compared to that without stacking. The limits of detection were in the range 0.01–0.10 mg L−1, which is acceptable with respect to the maximum residue limits. Good precisions were obtained with relative standard deviation lower than 1.8% (for migration time) and 10% (for peak area). The recoveries for most fruit juice samples were acceptable (>80%). No contamination of the studied carbamates was observed in any sample. The proposed method is simple and effective for preconcentration and removal of matrix interferences in a single step for the determination of the studied carbamate insecticides.

Monitoring the On-line Concentration and Separation of Gold Nanoparticles Using the Reversed Electrode Polarity Stacking Mode and Micellar Electrokinetic Chromatography

In this study, I separated gold nanoparticles (Au NPs) using the reversed electrode polarity stacking mode (REPSM) of a capillary electrophoresis system for on-line enhancement prior to performing micellar electrokinetic chromatography (MEKC). In the first part of this paper, I discuss the effects of several new and important parameters, the nature of the added salt, the pH of the sample matrix, and the size of the injection buffer plug that appears after introducing the samples, on the systems' on-line concentration and separation performance for a variety of sample compositions. In the second part of this paper, I describe my use of the optimized conditions to monitor the migration of the Au NPs during the concentration and separation processes. The results of these studies suggest that combining REPSM with MEKC is a very good strategy for the on-line concentration and separation of Au NPs at trace concentrations.

Determination of melamine and related triazine by-products ammeline, ammelide, and cyanuric acid by micellar electrokinetic chromatography

In this study, micellar electrokinetic chromatographic (MEKC) methods were developed for the detection of traces of melamine and its related by-products (ammeline, ammelide, and cyanuric acid). Two on-line sample concentration steps namely reversed electrode polarity stacking mode (REPSM) and cation-selective injection (CSI) were used for improving the detection sensitivity. For REPSM, a borate–NaOH buffer (pH 10, 35 mM) composed of 60 mM SDS and 10% (v/v) methanol, was used as carrier electrolyte, and samples were prepared in an aqueous solution of 10 mM NaOH. In CSI, a phosphate buffer (pH 2, 50 mM) containing 41 mM SDS was used as the carrier electrolyte, and samples were prepared with an aqueous solution of 10 mM NaOH and a phosphate buffer (pH 2.0, 25 mM) in a volume ratio of 1:9. The results indicated that REPSM enhanced all analyte signals except for melamine, which could be concentrated only by the CSI. The detection limit was reduced from 1.7 mg L −1 to 2.8 μg L −1 for melamine by the optimal CSI step, and from 0.23–1.2 mg L −1 to 2.4–5.0 μg L −1 for the other three analytes by the optimal REPSM step. Tableware made of melamine and samples of flour were used as test samples, and the results indicated that the proposed MEKC methods can successfully determine contaminations from melamine. The study also indicated that when the plastic made of melamine was exposed only once to an acidic solution (acetic or phosphoric acid) at 80 °C for 30 min, melamine continuously leached out from the test sample even without any further treatment with an acidic solution.

Determination of antihyperglycemic drugs in nanomolar concentration levels by micellar electrokinetic chromatography with non-ionic surfactant

A method for the separation of six selected antihyperglycemic (antidiabetic) drugs (tolbutamide, gliclazide, glimepiride, glibenclamide, repaglinide, and glipizide) was developed with use of micellar electrokinetic chromatography. Two non-ionic poly(ethylene glycol)-based surfactants Genapol X-080 and Triton X-114 (reduced) were studied as neutral pseudostationary phases. High alkaline pH 10.0 was used to obtain negative charges of separated antidiabetic drugs and non-ionic surfactants were employed for selectivity alteration. Both non-ionic surfactants provided good selectivity at concentration 0.2% (v/v) in sodium borate buffer and the separation of six drugs was obtained within 5 min. An on-line preconcentration method based on reversed electrode polarity switching was employed for the determination of antihyperglycemic drugs in blood serum after acetonitrile protein precipitation. The limits of detection ranged from 20.8 nmol L −1 for tolbutamide to 6.5 nmol L −1 for glibenclamide, respectively.

Using micellar electrokinetic chromatography for the highly efficient preconcentration and separation of gold nanoparticles

In this paper, we report the use of micellar electrokinetic chromatography (MEKC) for the highly efficient preconcentration and separation of gold nanoparticles (Au NPs). We used the reversed electrode polarity stacking mode (REPSM) of the MEKC system for the on-line enhancement and separation of the Au NPs. Several parameters had dramatic effects on the systems’ performance, including the concentration of sodium dodecylsulfate (SDS) surfactant, the presence of salts in the NP solution, the pH of the running electrolyte, and the temperature of the capillary. Under the optimized conditions [buffer: SDS (70 mM) and 3-cyclohexylamino-1-propanesulfonic acid (CAPS; 10 mM) at pH 10.0; applied voltage: 20 kV; operating temperature: 25 °C; additive: sodium dihydrogenphosphate (NaH 2PO 4, 10 mM); REPSM strategy for sample preconcentration], the number of theoretical plates for the 5.3- and 40.1-nm-diameter Au NPs were 3000 and (an ultrahigh) 2.1 × 10 6, respectively; in addition, the detection sensitivities toward the Au NPs were enhanced ca. 20- and 380-fold, respectively, relative to those obtained using standard MEKC analysis conditions. Furthermore, monitoring the electropherograms using diode-array detection allowed us to identify and characterize the sizes of the separated NPs from their UV–vis spectra. Our findings suggest that MEKC is a highly efficient tool for both the preconcentration and separation of NPs.

Pesticide analysis in tomatoes by solid-phase microextraction and micellar electrokinetic chromatography

The analysis of a group of seven pesticides (i.e. six fungicides: pyrimethanil, procymidone, nuarimol, fenarimol, benalaxyl and penconazole and one insecticide: pirimicarb) in tomato samples by micellar electrokinetic chromatography is investigated. For this purpose, reversed electrode polarity stacking mode and solid-phase microextraction (SPME) have been used as on-line and off-line preconcentration procedures, respectively. Tomato samples were first homogenized and extracted with acetone. After suitable evaporation and reconstitution of the extract in water, a SPME procedure using poly(dimethylsiloxane)/divinylbenzene fibers was used. Due to the strong influence of the sample matrix in the extraction, a matrix matched calibration of spiked tomato samples was developed. The method was found to be linear between 0.5 and 2.5 mg/kg. Limits of detection achieved are below the maximum residue limits established by the European Union and Spain legislation as well as by the Codex Alimentarius (except for penconazole). The potential of the method was demonstrated by analyzing 12 tomato samples (of ecological and non-ecological production) taken from regional cultivars. No residues of the selected pesticides were detected in any of the samples.

Pesticide analysis in rose wines by micellar electrokinetic chromatography

In this work, the determination of 11 pesticides (pirimicarb, metalaxyl, pyrimethanil, procymidone, nuarimol, azoxystrobin, tebufenozide, fenarimol, benalaxyl, penconazole, and tetradifon) in rose wines by micellar EKC (MEKC) using reversed electrode polarity stacking mode (REPSM) as online preconcentration strategy is described. The MEKC buffer consisted of 100 mM sodium tetraborate and 30 mM SDS at pH 8.5 with 6% v/v 1-propanol. A solid-phase microextraction (SPME) procedure using PDMS/divinylbenzene (PDMS/DVB) fibers was applied to extract the selected pesticides from the rose wine samples. The comparison between the calibration curves obtained from hydroalcoholic solutions (12% v/v ethanol) and from rose wines (matrix matched calibration) showed the existence of a strong matrix effect. Furthermore, a comparison with calibration curves obtained with white wine samples also showed significant differences for most of the analyzed pesticides. As a result, a matrix matched calibration was developed. Quantitative extraction from spiked wine samples was carried out in triplicate at two levels of concentration (range 0.18-6.00 mg/L). LODs between 0.040 and 0.929 mg/L were achieved, which are below the maximum residue limits (MRLs) established for wine grapes (except for pirimicarb) by the EU and Spain legislation as well as by the Codex Alimentarius. The established method - which is solvent free, cost effective, and fast - was also applied to the analysis of several homemade rose wine samples and a commercial one. Two of the selected pesticides were found in some of the analyzed samples.

A high-efficiency capillary electrophoresis-based method for characterizing the sizes of Au nanoparticles

In this paper, we present a highly efficient capillary electrophoresis (CE)-based method for characterizing the sizes of Au nanoparticles (NPs). We used the reversed electrode polarity stacking mode (REPSM) of CE for on-line enhancement of the detection and separation of Au NPs. Under the on-line enhancement separation conditions [buffer: SDS (70 mM) and 3-cyclohexylamino-1-propanesulfonic acid (10 mM) at pH 10.0; applied voltage: 20 kV; using the REPSM for sample concentration], the detection sensitivity toward the Au NPs improved by up to 260-fold. A linear relationship ( R 2 = 0.994) existed between the electrophoretic mobilities and the sizes of the Au NPs within the range of diameters from 5.3 to 59.9 nm; the relative standard deviations of the electrophoretic mobilities for these NPs were below 0.6%. When using these conditions to analyze Au NPs produced through seed-assisted synthesis, a good correlation existed between the sizes obtained using CE and those provided by transmission electron microscopy. Furthermore, the analyses performed using CE were rapid (<4 min) and required very low sample volumes (several nanoliters), yet they proceeded with high sensitivity. These findings confirm that CE is an efficient tool for characterizing the sizes of NPs.

On-line enhancement and separation of nanoparticles using capillary electrophoresis

We describe a rapid, simple, and highly efficient capillary electrophoresis (CE)-based method for the analysis of nanoparticles (NPs). In this study, we used the reversed electrode polarity stacking mode (REPSM) of CE to assess the feasibility of enhancing the detection of Au NPs and Au/Ag NPs, optimizing parameters such as the length of time for which the REPSM was applied, the concentrations of the buffer and the sodium dodecylsulfate (SDS) surfactant, and the pH. Under the optimized on-line enhancement conditions [buffer: SDS (40 mM) and 3-cyclohexylamino-1-propanesulfonic acid (CAPS; 10 mM) at pH 10.0; applied voltage: 20 kV; REPSM applied for 24 s], the detection limits of the Au NPs and Au/Ag NPs increased by ca. 30- and 140-fold, respectively. In addition, when the NPs were subjected to on-line enhancement and separation by CE using diode array detection (DAD), this approach allowed chemical characterization of the NP species. Our results suggest that such CE analyses will be useful for accelerating the rates of fabrication and characterization of future nanomaterials.

Determination of pesticides in wine using micellar electrokinetic chromatography with UV detection and sample stacking

In this work, the analysis of a group of four fungicides (pyrimethanil, nuarimol, procymidone and cyprodinil) and one insecticide (pirimicarb) by micellar electrokinetic chromatography (MEKC) with UV detection using the on-line preconcentration strategy called reversed electrode polarity stacking mode (REPSM) is proposed. After optimisation, an adequate separation electrolyte for the separation and stacking of these pesticides was obtained which consisted of 100 mM borate, 60 mM sodium dodecyl sulphate (SDS), at pH 9.0 and 2% 2-propanol. The use of this running buffer together with the REPSM preconcentration method provided limits of detection (LODs) between 38.3 and 241 μg/L. In order to apply the developed methodology for the analysis of these pesticides in wine samples, several off-line preconcentration strategies (mainly, solid-phase extraction, SPE, and solid-phase microextraction, SPME) were tested. Although the use of a SPE procedure, optimized in this work for water samples, using Oasis HLB cartridges, provided mean recovery values between 79 and 100% for spiked water samples, it could not be applied to the extraction of these pesticides from wine samples due to high interference from the sample matrix. However, the use of a SPME procedure using polydimethylsiloxane/divynilbenzene (PDMS/DVB) fibers allowed the selective extraction of four of the five pesticides which could be perfectly determined. The final combination of the off-line SPME and on-line REPSM preconcentration strategies allowed obtaining LODs between 17.6 and 32.3 μg/L.

Sample stacking for the analysis of penicillins by microemulsion electrokinetic capillary chromatography

We present a method for determining eight penicillin antibiotics using microemulsion electrokinetic chromatography (MEEKC). We studied how the composition of the microemulsion affected separation by modifying such parameters as the surfactant or the addition of organic solvents. The best microemulsion system consisted of 0.5% ethyl acetate, 1.2% 1-butanol, 2% Brij 35, 10% 2-butanol and 86.3% 10 mM borate buffer at pH 10. We studied the suitability of this microemulsion composition for analyzing a commercial drug. To improve the sensitivity of the method, we used the stacking technique reversed electrode polarity stacking mode (REPSM), which increased the detection limits by about 40-fold.