Reverse Transcription Step Research Articles

CRISPR/Cas13a analysis based on NASBA amplification for norovirus detection

Human norovirus (HuNoV) is a leading cause of foodborne diseases worldwide, making rapid and accurate detection crucial for prevention and control. In recent years, the CRISPR/Cas13a system, known for its single-base resolution in RNA recognition and unique collateral cleavage activity, is particularly suitable for sensitive and rapid RNA detection. However, isothermal amplification-based CRISPR/Cas13 assays often require an external transcription step, complicating the detection process. In our study, an efficient diagnostic technique based on the NASBA/Cas13a system was established to identify conserved regions at the ORF1-ORF2 junction of norovirus. The RNA amplification techniques [Nucleic Acid Sequence-Based Amplification (NASBA)] integrates reverse transcription and transcription steps, enabling sensitive, accurate, and rapid enrichment of low-abundance RNA. Furthermore, the CRISPR/Cas13a system provides secondary precise recognition of the amplified products, generating a fluorescence signal through its activated accessory collateral cleavage activity. We optimized the reaction kinetics parameters of Cas13a and achieved a detection limit as low as 51pM. The conditions for the cascade reaction involving CRISPR analysis and RNA amplification were optimized. Finally, we validated the reliability and accuracy of the NASBA/Cas13a method by detecting norovirus in shellfish, achieving results comparable to qRT-PCR in a shorter time and detecting viral loads as low as 10 copies/μL.

Detection of residual pluripotent stem cells in cell therapy products utilizing droplet digital PCR: an international multisite evaluation study.

The presence of residual undifferentiated pluripotent stem cells (PSCs) in PSC-derived cell therapy products (CTPs) is a major safety issue for their clinical application, due to the potential risk of PSC-derived tumor formation. An international multidisciplinary multisite study to evaluate a droplet digital PCR (ddPCR) approach to detect residual undifferentiated PSCs in PSC-derived CTPs was conducted as part of the Health and Environmental Sciences Institute Cell Therapy-TRAcking, Circulation & Safety Technical Committee. To evaluate the use of ddPCR in quantifying residual iPSCs in a cell sample, different quantities of induced pluripotent stem cells (iPSCs) were spiked into a background of iPSC-derived cardiomyocytes (CMs) to mimic different concentrations of residual iPSCs. A one step reverse transcription ddPCR (RT-ddPCR) was performed to measure mRNA levels of several iPSC-specific markers and to evaluate the assay performance (precision, sensitivity, and specificity) between and within laboratories. The RT-ddPCR assay variability was initially assessed by measuring the same RNA samples across all participating facilities. Subsequently, each facility independently conducted the entire process, incorporating the spiking step, to discern the parameters influencing potential variability. Our results show that a RT-ddPCR assay targeting ESRG, LINC00678, and LIN28A genes offers a highly sensitive and robust detection of impurities of iPSC-derived CMs and that the main contribution to variability between laboratories is the iPSC-spiking procedure, and not the RT-ddPCR. The RT-ddPCR assay would be generally applicable for tumorigenicity evaluation of PSC-derived CTPs with appropriate marker genes suitable for each CTP.

Penggunaan Metode Quantitative Polymerase Chain Reaction (qPCR) untuk Deteksi Fragmen DNA Babi pada Produk Olahan Daging

Using food ingredients and/or processed food products contaminated with pork, whether unintentionally or intentionally, has become a growing concern and issue. This condition encourages the development of an accurate method for specifically detecting the presence or absence of pork contamination. The research was carried out on two different samples: (1) fresh pork to provide an in-house positive control and (2) samples of pork-based processed meat products (floss, meatballs, corned beef, and sausages), tested using DNA markers. The use of samples originating from processed pork food is to determine the effect of the processing process on DNA fragments and the robustness of the extraction method for the detection process used. The research aimed to detect pork DNA fragments using the quantitative polymerase chain reaction (qPCR) method. The study stages were extracting fresh pork and processed products using an RNA extraction kit, DNA extraction kit, and salt extraction, as well as measuring the purity and concentration of DNA/RNA using a spectrophotometer. The RNA extract was converted into complementary DNA (cDNA), and the DNA extract was analyzed using qPCR with specific primers for pork DNA (Sus scrofa). The results showed that the concentration of RNA and DNA extracts was 71.1–296.025 ng/uL and of various purity. All processed meat product samples and in-house positive controls were amplified in the Ct range of 23–28 ng/uL. In this case, the meat processing had no effect on the DNA of the processed meat products analyzed, so DNA fragments could be detected. DNA qPCR was more time efficient than cDNA qPCR because it did not require an RNA reverse transcription step. Keywords: beta actin, cycle threshold, fresh pork, pork DNA, qPCR

Cyclophilin A Facilitates HIV-1 DNA Integration.

HIV-1 capsid interaction with host cellular factors is essential for establishing a productive infection. However, the molecular details of such virus-host interactions are not fully understood. Cyclophilin A (CypA) is the first host protein identified to specifically bind to the HIV-1 capsid. Now it is established that CypA promotes reverse transcription and nuclear entry steps of HIV-1 infection. In this report, we show that CypA promotes HIV-1 integration by binding to the viral capsid. Specifically, our results demonstrate that CypA promotes HIV-1 integration by stimulating the activity of the viral preintegration complex and identifies a novel role of CypA during HIV-1 infection. This new knowledge is important because recent reports suggest that an operationally intact HIV-1 capsid enters the nucleus of an infected cell.

Classic human astrovirus 4, 8, MLB-3, and likely new genotype 5 sublineage in stool samples of children in Nigeria.

Human astrovirus (HAstV) is a nonenveloped RNA virus and has been implicated in acute gastroenteritis among children and elderly. However, there exists a substantial dearth of information on HAstV strains circulating in Nigeria. Viral-like particles were purified from archived 254 stool samples of children with acute flaccid paralysis between January and December 2020 from five states in Nigeria, using the NetoVIR protocol. Extracted viral RNA and DNA were subjected to a reverse transcription step and subsequent random polymerase chain reaction amplification. Library preparation and Illumina sequencing were performed. Using the virome paired-end reads pipeline, raw reads were processed into genomic contigs. Phylogenetic and pairwise identity analysis of the recovered HAstV genomes was performed. Six near-complete genome sequences of HAstV were identified and classified as HAstV4 (n = 1), HAstV5 (n = 1), HAstV8 (n = 1), and MLB-3 (n = 3). The HAstV5 belonged to a yet unclassified sublineage, which we tentatively named HAstV-5d. Phylogenetic analysis of open reading frames 1a, 1b, and 2 suggested recombination events inside the MAstV1 species. Furthermore, phylogenetic analysis implied a geographic linkage between the HAstV5 strain from this study with two strains from Cameroon across all the genomic regions. We report for the first time the circulation of HAstV genotypes 4, 8, and MLB-3 in Nigeria and present data suggestive for the existence of a new sublineage of HAstV5. To further understand the burden, diversity, and evolution of HAstV, increased research interest as well as robust HAstV surveillance in Nigeria is essential.

Murine leukemia virus infection of non-dividing dendritic cells is dependent on nucleoporins.

Retroviral reverse transcription starts within the capsid and uncoating and reverse transcription are mutually dependent. There is still debate regarding the timing and cellular location of HIV's uncoating and reverse transcription and whether it occurs solely in the cytoplasm, nucleus or both. HIV can infect non-dividing cells because there is active transport of the preintegration complex (PIC) across the nuclear membrane, but Murine Leukemia Virus (MLV) is thought to depend on cell division for replication and whether MLV uncoating and reverse transcription is solely cytoplasmic has not been studied. Here, we used NIH3T3 and primary mouse dendritic cells to determine where the different stages of reverse transcription occur and whether cell division is needed for nuclear entry. Our data strongly suggest that in both NIH3T3 cells and dendritic cells (DCs), the initial step of reverse transcription occurs in the cytoplasm. However, we detected MLV RNA/DNA hybrid intermediates in the nucleus of dividing NIH3T3 cells and non-dividing DCs, suggesting that reverse transcription can continue after nuclear entry. We also confirmed that the MLV PIC requires cell division to enter the nucleus of NIH3T3 cells. In contrast, we show that MLV can infect non-dividing primary DCs, although integration of MLV DNA in DCs still required the viral p12 protein. Knockdown of several nuclear pore proteins dramatically reduced the appearance of integrated MLV DNA in DCs but not NIH3T3 cells. Additionally, MLV capsid associated with the nuclear pore proteins NUP358 and NUP62 during infection. These findings suggest that simple retroviruses, like the complex retrovirus HIV, gain nuclear entry by traversing the nuclear pore complex in non-mitotic cells.

Analysis of Negative-Strand RNA Viruses by RT-qPCR: Rift Valley Fever Virus and Toscana Virus.

RT-qPCR allows the detection of viruses and the monitoring of viral replication. This technique was extensively employed during the SARS-CoV-2 pandemic, where it demonstrated its efficiency and robustness. Here we describe the analysis of Rift Valley fever and Toscana virus infections over time, achieved through the RT-qPCR quantification of the viral genome. We further elaborate on the method to discriminate between genomic and antigenomic viral RNAs by using primers specific for each strand during the reverse transcription step.

Direct RNA Sequencing of Foot-and-mouth Disease Virus Genome Using a Flongle on MinION.

Foot-and-mouth disease (FMD) is a severe and extremely contagious viral disease of cloven-hoofed domestic and wild animals, which leads to serious economic losses to the livestock industry globally. FMD is caused by the FMD virus (FMDV), a positive-strand RNA virus that belongs to the genus Aphthovirus, within the family Picornaviridae. Early detection and characterization of FMDV strains are key factors to control new outbreaks and prevent the spread of the disease. Here, we describe a direct RNA sequencing method using Oxford Nanopore Technology (ONT) Flongle flow cells on MinION Mk1C (or GridION) to characterize FMDV. This is a rapid, low cost, and easily deployed point of care (POC) method for a near real-time characterization of FMDV in endemic areas or outbreak investigation sites. Key features • Saves ~35 min of the original protocol time by omitting the reverse transcription step and lowers the costs of reagents and consumables. • Replaces the GridION flow cell from the original protocol with the Flongle, which saves ~90% on the flow cell cost. • Combines the NGS benchwork with a modified version of our African swine fever virus (ASFV) fast analysis pipeline to achieve FMDV characterization within minutes. Graphical overview Schematic of direct RNA sequencing of foot-and-mouth disease virus (FMDV) process, which takes ~50 min from extracted RNA to final loading, modified from the ONT SQK-RNA002 protocol (Version: DRS_9080_v2_revO_14Aug2019).

Restrander: rapid orientation and artefact removal for long-read cDNA data.

In transcriptomic analyses, it is helpful to keep track of the strand of the RNA molecules. However, the Oxford Nanopore long-read cDNA sequencing protocols generate reads that correspond to either the first or second-strand cDNA, therefore the strandedness of the initial transcript has to be inferred bioinformatically. Reverse transcription and PCR can also introduce artefacts which should be flagged in data pre-processing. Here we introduce Restrander, a lightning-fast and highly accurate tool for restranding and removing artefacts in long-read cDNA sequencing data. Thanks to its C++ implementation, Restrander was faster than Oxford Nanopore Technologies' existing tool Pychopper, and correctly restranded more reads due to its strategy of searching for polyA/T tails in addition to primer sequences from the reverse transcription and template-switch steps. We found that restranding improved the process of visualising and exploring data, and increased the number of novel isoforms discovered by bambu, particularly in regions where sense and anti-sense transcripts co-occur. The artefact detection implemented in Restrander quantifies reads lacking the correct 5' and 3' ends, a useful feature in quality control for library preparation. Restrander is pre-configured for all major cDNA protocols, and can be customised with user-defined primers. Restrander is available at https://github.com/mritchielab/restrander.

Viral load: We need a new look at an old problem?

The concept of viral load was introduced in the 1980s to measure the amount of viral genetic material in a person's blood, primarily for human immunodeficiency virus (HIV). It has since become crucial for monitoring HIV infection progression and assessing the efficacy of antiretroviral therapy. However, during the coronavirus disease 2019 pandemic, the term "viral load" became widely popularized, not only for the scientific community but for the general population. Viral load plays a critical role in both clinical patient management and research, providing valuable insights for antiviral treatment strategies, vaccination efforts, and epidemiological control measures. As measuring viral load is so important, why don't researchers discuss the best way to do it? Is it simply acceptable to use raw Ct values? Relying solely on Ct values for viral load estimation can be problematic due to several reasons. First, Ct values can vary between different quantitative polymerase chain reaction assays, platforms, and laboratories, making it difficult to compare data across studies. Second, Ct values do not directly measure the quantity of viral particles in a sample and they can be influenced by various factors such as initial viral load, sample quality, and assay sensitivity. Moreover, variations in viral RNA extraction and reverse-transcription steps can further impact the accuracy of viral load estimation, emphasizing the need for careful interpretation of Ct values in viral load assessment. Interestingly, we did not observe scientific articles addressing different strategies to quantify viral load. The absence of standardized and validated methods impedes the implementation of viral load monitoring in clinical management. The variability in cell quantities within samples and the variation in viral particle numbers within infected cells further challenge accurate viral load measurement and interpretation. To advance the field and improve patient outcomes, there is an urgent need for the development and validation of tailored, standardized methods for precise viral load quantification.

Reverse transcription-quantitative PCR (RT-qPCR) without the need for prior removal of DNA

The procedure illustrated in this paper represents a new method for transcriptome analysis by PCR (Polymerase Chain Reaction), which circumvents the need for elimination of potential DNA contamination. Compared to the existing methodologies, our method is more precise, simpler and more reproducible because it preserves the RNA’s integrity, does not require materials and/or reagents that are used for elimination of DNA and it also reduces the number of samples that should be set up as negative controls. This novel procedure involves the use of a specifically modified primer during reverse transcription step, which contains mismatched bases, thus producing cDNA molecules that differ from genomic DNA. By using the same modified primer in PCR amplification, only cDNA template is amplified since genomic DNA template is partially heterologous to the primer. In this way, amplification by PCR is unaffected by any potential DNA contamination since it is specific only for the cDNA template. Furthermore, it accurately reflects the initial RNA concentration of the sample, which is prone to changes due to various physical or enzymatic treatments commonly used by the current methodologies for DNA elimination. The method is particularly suitable for quantification of highly repetitive DNA transcripts, such as satellite DNA.

Vpx requires active cellular dNTP biosynthesis to effectively counteract the anti-lentivirus activity of SAMHD1 in macrophages

HIV-1 replication in primary monocyte-derived macrophages (MDMs) is kinetically restricted at the reverse transcription step due to the low deoxynucleoside triphosphates (dNTP) pools established by host dNTPase, SAM and HD domain containing protein 1 (SAMHD1). Lentiviruses such as HIV-2 and some Simian immunodeficiency virus counteract this restriction using viral protein X (Vpx), which proteosomally degrades SAMHD1 and elevates intracellular dNTP pools. However, how dNTP pools increase after Vpx degrades SAMHD1 in nondividing MDMs where no active dNTP biosynthesis is expected to exists remains unclear. In this study, we monitored known dNTP biosynthesis machinery during primary human monocyte differentiation to MDMs and unexpectedly found MDMs actively express dNTP biosynthesis enzymes such as ribonucleotide reductase, thymidine kinase 1, and nucleoside-diphosphate kinase. During differentiation from monocytes the expression levels of several biosynthesis enzymes are upregulated, while there is an increase in inactivating SAMHD1 phosphorylation. Correspondingly, we observed significantly lower levels of dNTPs in monocytes compared to MDMs. Without dNTP biosynthesis availability, Vpx failed to elevate dNTPs in monocytes, despite SAMHD1 degradation. These extremely low monocyte dNTP concentrations, which cannot be elevated by Vpx, impaired HIV-1 reverse transcription in a biochemical simulation. Furthermore, Vpx failed to rescue the transduction efficiency of a HIV-1 GFP vector in monocytes. Collectively, these data suggest that MDMs harbor active dNTP biosynthesis and Vpx requires this dNTP biosynthesis to elevate dNTP levels to effectively counteract SAMHD1 and relieve the kinetic block to HIV-1 reverse transcription in MDMs.

Multiplexed and accurate quantification strategy for miRNA based on specific terminal-mediated PCR with equivalent amplification.

MicroRNAs (miRNAs) are recognized as potential biomarkers for the early diagnosis and prognosis of different diseases. Multiplexed and accurate miRNA quantification methods with equivalent detection efficiency are particularly crucial due to their complex biological functions and lack of a unified internal reference gene. Here, a unique multiplexed miRNA detection method, named Specific Terminal-Mediated miRNA PCR (STEM-Mi-PCR), was developed. It mainly includes a linear reverse transcription step using tailored-designed target specific capture primers, followed by an exponential amplification process using two universal primers to execute the multiplex assay. For proof of concept, four miRNAs were used as models to develop a multiplexed detection assay within one tube simultaneously and then evaluate the performance of the established STEM-Mi-PCR. The sensitivity of the 4-plexed assay was approximately 100 aM with an equivalent amplification efficiency (95.67±8.58%), and had no cross-reactivity each other with high specificity. Quantification of different miRNAs in twenty patients' tissues shown variation from approximately pM to fM concentration level, demonstrating the possibility of practical application of the established method. Moreover, this method was extraordinarily capable of single nucleotide mutation discrimination in different let-7 family members with no more than 0.7% nonspecific detection signal. Hence, the STEM-Mi-PCR we proposed here paves an easy and promising way for miRNA profiling in future clinical applications.

Naturally occurring dipeptide from elite controllers with dual anti-HIV-1 mechanism

BackgroundEnhanced levels of a dipeptide, WG-am, have been reported among elite controllers – patients who spontaneously control their HIV-1 infection. This study aimed to evaluate anti-HIV-1 activity and mechanism of action of WG-am. MethodsDrug sensitivity assays in TZM.bl cells, PBMCs and ACH-2 cells using WT and mutated HIV-1 strainswere performed to evaluate the antiviral mechanism of WG-am. Mass spectrometry-based proteomics and Real-time PCR analysis of reverse transcription steps were performed to unravel the second anti-HIV-1 mechanism of WG-am. ResultsThe data suggest that WG-am binds to the CD4 binding pocket of HIV-1 gp120 and blocks its binding to the host cell receptors. Additionally, the time course assay showed that WG-am also inhibited HIV-1 at 4–6 hours post-infection, suggesting a second antiviral mechanism. Drug sensitivity assays under acidic wash conditions confirmed the ability of WG-am to internalise into the host cell in an HIV independent manner. Proteomic studies showed a clustering of all samples treated with WG-am independent of the number of doses or presence or absence of HIV-1. Differentially expressed proteins due to the WG-am treatment indicated an effect on HIV-1 reverse transcription, which was confirmed by reverse transcriptase polymerase chain reaction (RT-PCR). ConclusionNaturally occurring in HIV-1 elite controllers, WG-am stands out as a new kind of antiviral compound with two independent inhibitory mechanisms of action on HIV-1 replication. WG-am halts HIV-1 entry to the host cell by binding to HIV-1 gp120, thereby blocking the binding of HIV-1 to the host cell. WG-am also exerts a post-entry but pre-integration antiviral effect related to RT-activity.

A SERS-signalled, CRISPR/Cas-powered bioassay for amplification-free and anti-interference detection of SARS-CoV-2 in foods and environmental samples using a single tube-in-tube vessel

The pandemic of COVID-19 creates an imperative need for sensitive and portable detection of SARS-CoV-2. We devised a SERS-read, CRISPR/Cas-powered nanobioassay, termed as OVER-SARS-CoV-2 (One-Vessel Enhanced RNA test on SARS-CoV-2), which enabled supersensitive, ultrafast, accurate and portable detection of SARS-CoV-2 in a single vessel in an amplification-free and anti-interference manner. The SERS nanoprobes were constructed by conjugating gold nanoparticles with Raman reporting molecular and single-stranded DNA (ssDNA) probes, whose aggregation-to-dispersion changes can be finely tuned by target-activated Cas12a though trans-cleavage of linker ssDNA. As such, the nucleic acid signals could be dexterously converted and amplified to SERS signals. By customizing an ingenious vessel, the steps of RNA reverse transcription, Cas12a trans-cleavage and SERS nanoprobes crosslinking can be integrated into a single and disposal vessel. It was proved that our proposed nanobioassay was able to detect SARS-CoV-2 as low as 200 copies/mL without any pre-amplification within 45 min. In addition, the proposed nanobioassay was confirmed by clinical swab samples and challenged for SARS-CoV-2 detection in simulated complex environmental and food samples. This work enriches the arsenal of CRISPR-based diagnostics (CRISPR-Dx) and provides a novel and robust platform for SARS-CoV-2 decentralized detection, which can be put into practice in the near future.

Nanopore Technology Applied to Targeted Detection of Tomato Brown Rugose Fruit Virus Allows Sequencing of Related Viruses and the Diagnosis of Mixed Infections

Tomato (Solanum lycopersicum) plants from a commercial glasshouse were identified with symptoms compatible with a tomato brown rugose fruit virus (ToBRFV) infection. Reverse transcription-PCR and quantitative PCR confirmed the presence of ToBRFV. Subsequently, the same RNA sample and a second from tomato plants infected with a similar tobamovirus, tomato mottle mosaic virus (ToMMV), were extracted and processed for high-throughput sequencing with the Oxford Nanopore Technology (ONT). For the targeted detection of ToBRFV, the two libraries were synthesized by using six ToBRFV sequence-specific primers in the reverse transcription step. This innovative target enrichment technology enabled deep coverage sequencing of ToBRFV, with 30% of the total reads mapping to the target virus genome and 57% mapping to the host genome. The same set of primers applied to the ToMMV library generated 5% of the total reads mapping to the latter virus, indicating that sequencing of similar, non-target viral sequences was also allowed. Further, the complete genome of pepino mosaic virus (PepMV) was also sequenced from the ToBRFV library, thus suggesting that, even using multiple sequence-specific primers, a low rate of off-target sequencing can usefully provide additional information on unexpected viral species coinfecting the same samples in an individual assay. These results demonstrate that targeted nanopore sequencing can specifically identify viral agents and has sufficient sensitivity towards non-target organisms to provide evidence of mixed virus infections.

Malachite Green-Based Detection of SARS-CoV-2 by One-Step Reverse Transcription Loop-Mediated Isothermal Amplification

The pandemic of severe acute respiratory syndrome 2 (SARS-CoV-2) revealed the necessity of diagnosis of the infected people to prevent the prevalence infection cycle. Many commercial pathogen diagnosis methods are based on the detection of genomic materials. Isothermal amplification methods such as loop-mediated-isothermal amplification (LAMP) are the method of choice in these cases. Reverse transcription steps are efficiently coupled to LAMP for the detection of pathogens with genomic RNAs such as SARS-CoV-2. Many detection systems for LAMP include fluorescent readout systems. Although such systems result in desirable limits of detection, the need for special instrumentation is the main dispute of such systems to become real point of care assays. In contrast, colorimetric detection methods would reduce costs and improve the applicability of the system. In this study one-step reverse transcription-LAMP reaction was established that enables visual detection of the SARS-CoV-2 genome. Nasopharyngeal RNA samples were first validated by reverse transcription quantitative polymerase chain reaction and then subjected to RT-LAMP. To lower the cost associated with the readout system equipment, malachite green (MG) was used. The color change of MG to blue allowed visual detection of the virus. Firstly, experiments were set up as two-step RT-LAMP reaction to identify the best primer sets. In addition, MG concentration was optimized with the significant colorimetric signal for the positive samples. Next, a one-step colorimetric method was developed for the detection of SARS-CoV-2 based on MG color shift in 2 h.

Rapid, multiplex detection of SARS-CoV-2 using isothermal amplification coupled with CRISPR-Cas12a

In December 2019 an outbreak erupted due to the beta coronavirus Severe Acute Respiratory Syndrome Coronavirus 2 in Wuhan, China. The disease caused by this virus (COVID-19) rapidly spread to all parts of the globe leading to a global pandemic. Efforts to combat the pandemic rely on RT-qPCR diagnostic tests that have high turnaround times (~ 24 h), are easily contaminated, need specialized equipment, facilities, and personnel that end up increasing the overall costs of this method. Loop-mediated isothermal amplification (LAMP) coupled with a reverse transcription step (RT-LAMP) is an alternative diagnostic method that can easily overcome these obstacles, when coupled with CRISPR/Cas it can eliminate false positives. Here we report a fast (~ 40 min), highly sensitive, point-of-care multiplex RT-LAMP and CRISPR/Cas12a assay to detect SARS-CoV-2. This fluorescence-based test achieved 100% specificity and 93% sensitivity using 25 positives and 50 negative patient samples for Ct < 35. Our reported LoD of 3 copies/µL will enable the robust, fast detection of the virus in a dedicated equipment which is a major step towards population-wide accessible testing.

New method for microRNA detection based on multimerization

Detection of specific microRNA (miRNA) is of great demand due to their essential role in genes regulation, stress response and development of diseases. However, mature miRNAs are small molecules that make it difficult to use routine amplification-based methods. Here, we report an approach for detection of miRNA based on a new type of isothermal amplification, namely, multimerization. The proposed technique is simple and versatile, excludes a reverse transcription step, and requires two conventional primers only and no additional stem-loop or fluorogenic probes. Only mature miRNAs can initiate multimerization, thereby, pri- or pre-miRNA are excluded from analysis, ensuring high accuracy of the assay. The approach was approved on miRNA from common wheat Triticum aestivum; the increase of Tae-miRNA159 level for plants affected by Stagonospora nodorum Berk infection was demonstrated. The obtained results allow to perform quantitative analysis, providing determination of specific targets with high reliability (detection limit of about 20 pM).

Reverse transcription-free digital-quantitative-PCR for microRNA analysis.

MicroRNAs (miRNAs) are non-coding RNA sequences that regulate many biological processes and have become central targets of biomedical research. However, their naturally low abundances in biological samples necessitates the development of sensitive analytical techniques to conduct routine miRNA measurements in research laboratories. Digital PCR has the potential to meet this need because of its single-molecule detection capabilities, but PCR analyses of miRNAs are slowed by the ligation and reverse transcription steps first required to prepare samples. This report describes the development of a method to rapidly quantify miRNA in digital microwell arrays using base-stacking digital-quantitative-PCR (BS-dqPCR). BS-dqPCR expedites miRNA measurements by eliminating the need for ligation and reverse transcription steps, which reduces the time and cost compared to conventional miRNA PCR analyses. Under standard PCR thermocycling conditions, digital signals from miRNA samples were lower than expected, while signals from blanks were high. Therefore, a novel asymmetric thermocycling program was developed that maximized on-target signal from miRNA while minimizing non-specific amplification. The analytical response of BS-dqPCR was then evaluated over a range of miRNA concentrations. The digital PCR dimension increased in signal with increasing miRNA copy numbers. When the digital signal saturated, the quantitative PCR dimension readily discerned miRNA copy number differences. Overall, BS-dqPCR provides rapid, high-sensitivity measurements of miRNA over a wide dynamic range, which demonstrates its utility for routine miRNA analyses.