Reverse Osmosis Membrane Desalination Research Articles

More resilient polyester membranes for high-performance reverse osmosis desalination.

Thin-film composite reverse osmosis membranes have remained the gold standard technology for desalination and water purification for nearly half a century. Polyamide films offer excellent water permeability and salt rejection but also suffer from poor chlorine resistance, high fouling propensity, and low boron rejection. We addressed these issues by molecularly designing a polyester thin-film composite reverse osmosis membrane using co-solvent-assisted interfacial polymerization to react 3,5-dihydroxy-4-methylbenzoic acid with trimesoyl chloride. This polyester membrane exhibits substantial water permeability, high rejection for sodium chloride and boron, and complete resistance toward chlorine. The ultrasmooth, low-energy surface of the membrane also prevents fouling and mineral scaling compared with polyamide membranes. These membranes could increasingly challenge polyamide membranes by further optimizing water-salt selectivity, offering a path to considerably reducing pretreatment steps in desalination.

Influence of melamine and graphene oxide on the performance of polyamide reverse osmosis membranes for desalination

Influence of melamine and graphene oxide on the performance of polyamide reverse osmosis membranes for desalination

The solution-diffusion model for water transport in reverse osmosis: What went wrong?

Reverse osmosis (RO) stands as the state-of-the-art desalination technology, owing to its high energy efficiency and low cost. Further improvements in the performance of this technology require a fundamental understanding of transport mechanisms in RO membranes. For decades, the solution-diffusion model has been the prevalent approach to describe water transport mechanism in RO membranes. In this model, water first partitions into the membrane and then diffuses down a concentration gradient of water within the RO membrane. However, recent experimental and theoretical findings pose serious challenges to the fundamental assumptions of this theory. In this perspective, we discuss seven critical flaws in the solution-diffusion model and explain why the model fails to describe water transport in RO membranes. Instead, through our careful analyses, we determine that the pore-flow model, in which a pressure gradient drives water flow through membrane pores or interconnected free volumes, represents the true mechanism for water transport. We conclude by highlighting the need for research efforts to better understand the frictional interactions between water, salt, and membrane and their impact on water transport. Overall, a fundamental understanding of the water transport mechanism will inform the development of next-generation RO desalination membranes.

Magnesium Ion Gated Ion Rejection through Carboxylated Graphene Oxide Nanopore: A Theoretical Study.

While nanoporous graphene oxide (GO) is recognized as one of the most promising reverse osmosis desalination membranes, limited attention has been paid to controlling desalination performance through the large GO pores, primarily due to significant ion leakage resulting in the suboptimal performance of these pores. In this study, we employed a molecular dynamics simulation approach to demonstrate that Mg2+ ions, adhered to carboxylated GO nanopores, can function as gates, regulating the transport of ions (Na+ and Cl-) through the porous GO membrane. Specifically, the presence of divalent cations near a nanopore reduces the concentration of salt ions in the vicinity of the pore and prolongs their permeation time across the pore. This subsequently leads to a notable enhancement in salt rejection rates. Additionally, the ion rejection rate increases with more adsorbed Mg2+ ions. However, the presence of the adsorbed Mg2+ ions compromises water transport. Here, we also elucidate the impact of graphene oxidation degree on desalination. Furthermore, we design an optimal combination of adsorbed Mg2+ ion quantity and oxidation degree to achieve high water flux and salt rejection rates. This work provides valuable insights for developing new nanoporous graphene oxide membranes for controlled water desalination.

Novel two-dimensional fused pentagon monolayer as a separation membrane with high desalination properties

The contradiction between supply and demand of freshwater, which has emerged as a global concern, is intensifying as the continued growth of the population on earth, and desalination serves as a tactic to enable open source increment of water resources. Lately, fused pentagon, a hypothetical two-dimensional (2D) carbon allotrope, has focused the attention of researchers due to its extensive five-membered multiple-ring structure and superior properties. However, the potential solute transport mechanism of fused pentagon as a 2D reverse osmosis desalination membrane has not been profoundly elucidated. Here, we combine density functional theory (DFT) and molecular dynamics (MD) to explore the promising feasibility of fused pentagon with abundant penta‑carbon rings for desalination applications, and further analyze the properties superiority of such materials featuring periodic pore structures from the electronic level. The results indicate that the membrane structure constructed by a uniform distribution of enriched pentagonal and dodecagonal pores exhibits exceptional structural stability and satisfactory resistance to salt ion aggregation. Compared with other 2D materials, the 12-membered carbon rings of fused pentagon demonstrate remarkable Na ions adsorption properties (adsorption energy value is −2.049 eV, which is superior than those of the compared 2D materials), with a charge transfer of 0.68 |e| as Na ions across the membrane. Moreover, with the physical pressure increased to 95 MPa, the salt ions rejection rate of fused pentagon could present >92.31 % while preserving superior water molecule penetration, which evidences its favorable desalination properties. Promisingly, fused pentagon manifests intrinsic metallicity, which facilitates self-cleaning upon electrical stimulation. This work clarifies the desalination mechanism of fused pentagon monolayer from a theoretical perspective and contributes to an innovative research concept for the development of carbon-based reverse osmosis materials.

Additive-optimized micro-structure in cellulose acetate butyrate-based reverse osmosis membrane for desalination

Progress toward the high water flux of cellulose acetate butyrate (CAB)-based reverse osmosis (RO) membrane is a bottleneck for desalination and mitigation of fresh water shortage. Here, we develop an “optimization of formulation-induced structure” strategy using acetone (solvent), triethyl phosphate (pore-inducing agent), glycerin and n-propanol (boosters), which achieves a state-of-the-art salt rejection of 97.1% and permeate flux of 8.73 L m−2·h−1, ranking top among CAB-based RO membrane. Compared with reported literatures, it represents high separation performance for different concentrations (20–100 mg L−1) of Rhodamine B and Congo red, different ion types (NaCl and MgCl2), different time (600 min), and resistance to feed pressure changes. The key is the appropriate viscosity of the casting solution (995.52 mPa s), the synergy between the components and additives, contributing to the formation of “jellyfish"-like microscopic pore structure with the lowest surface roughness (Ra = 16.3) and good hydrophilicity. The proposed correlation mechanism between additive-optimized micro-structure and desalination provides a promising prospect for CAB-based RO membrane.

Thermal treated amidoxime modified polymer of intrinsic microporosity (AOPIM-1) membranes for high permselectivity reverse osmosis desalination

Despite the commercial success of polyamide reverse osmosis (RO) membranes for desalination, shortcomings of the material intrinsic properties hinder the further improvement of RO membrane permselectivity towards more energy-efficient desalination. Exploring new polymer materials is thus important to overcome the limitation of existing RO membrane materials. This work reports an investigation on an amidoxime modified polymer of intrinsic microporosity (AOPIM-1) as a membrane material for reverse osmosis desalination. AOPIM-1 is casted into a defect-free dense membrane, and followed by a thermal treatment to finetune its structural feature for enhanced salt rejection. As a polymer with stiff and distorted backbone structure, thermal treated AOPIM-1 possesses a high free volume and highly connected 0.3–0.8 nm micropores that provide fast water transport routes while regulating the permeation of ions. The rapid transport through the microporous channels gives the AOPIM-1 membrane a water permeability of 1.92 × 10−7 m·kg/m2·h·bar with NaCl rejection as high as 98.5 %. The thickness-normalized water permeability of AOPIM-1 membrane exhibits order-of-magnitude improvement comparing to conventional polyamide-based desalination membranes, and the permselectivity of the membrane is also found to be on the high side. This study confirms the possibility of utilizing microporous polymers as reverse osmosis membrane materials for high performance desalination.

Simulations of Tapered Channel in Multilayer Graphene as Reverse Osmosis Membrane for Desalination

Simulations of Tapered Channel in Multilayer Graphene as Reverse Osmosis Membrane for Desalination

Intentional Fouling Enabled In Situ Healing of Compromised Reverse Osmosis Membranes for Desalination and Water Purification

Intentional Fouling Enabled In Situ Healing of Compromised Reverse Osmosis Membranes for Desalination and Water Purification

Assessing the potential of highly permeable reverse osmosis membranes for desalination: Specific energy and footprint analysis

The ultra-permeable membranes (UPMs) are expected to reduce the specific energy consumption (SEC) of desalination, but the potential of UPMs in hollow fiber configuration has not been well quantified. Herein, we analyse the SEC and footprints of UPM modules in three feed salinities: seawater reverse osmosis (SWRO), brackish water RO (BWRO) and low-pressure RO (LPRO). Through the modelling the fluid dynamics and mass transport of RO systems, we find that a tripling in spiral-wound SWRO membrane permeability (based on the current value of 1 L m−2 h−1 bar−1; LMH/bar) could result in 16% decrease in SEC. Contrastingly, the quadrupling of hollow fiber SWRO membrane permeability (based on the current value of 0.25 LMH/bar) could reduce the SEC by 23%. According to our analysis, hollow fiber and spiral-wound SWRO membranes with permeabilities up to 1 LMH/bar and 3 LMH/bar, respectively, can reduce the SEC of seawater desalination. On the other hand, membranes with permeabilities up to 9 LMH/bar and 12 LMH/bar can lead to SEC savings in BWRO and LPRO desalination, respectively. This study provides a general guidance to RO membrane researchers on the permeability upper-limit of which UPMs could bring about SEC and footprint savings at a system level.

Assessing the Potential of Highly Permeable Reverse Osmosis Membranes for Desalination: Specific Energy and Footprint Analysis

Assessing the Potential of Highly Permeable Reverse Osmosis Membranes for Desalination: Specific Energy and Footprint Analysis

Sulfonated Phthalocyanine Redox Flow Cell for Electrochemical Water Desalination

A reliable clean water supply is now one important and challenging issue for the human society. With the facts that only 0.4% of the water on earth is readily drinkable and 98% of the water is saltwater, water desalination for clean water production has become a key strategic solution to satisfy the increasing global water demand. Over the years, different saltwater desalination technologies were researched and developed, including reverse osmosis membrane desalination (RO), electrodialysis (ED), capacitive desalination (CDI) and multi-effect distillation (MED). However, some inherent technical issues, like high operation cost, large capital cost and/or low desalination capacity, associate with these existing technologies that lead to a high clean water production cost and limit their applications. Thus, there is a need of new water desalination technology that can purify saltwater with low cost and high efficiency.In this work we report a new water-soluble nickel phthalocyanine tetrasulfonic acid tetrasodium salt (NiPcTATS)-based redox flow desalination battery (RFDB) for safe, effective and efficient water-salt separation. The fabricated RFDB cell exhibited a high desalination rate at 3.4 gNaCl/(molNiPcTATS∙hr) even with a low 0.5 V cell voltage and required as low as 11.5 kJ/mol salt in energy consumption. The cell showed excellent reversibility and durability for long-term operation, benefiting from the fast-redox kinetics and chemical stability of the redox couple. With no consumption of the redox couple and energy recovery during the salination process, this new method provides a continuous desalination capability with unlimited salt removal capacity. We also demonstrated the use of simple solar panel for effectively driving the RFDB cell, proving it a promising and practical technology for clean water production in remote places like islands and ships.

Nanoporous MoS2 Membrane for Water Desalination: A Molecular Dynamics Study.

Molybdenum disulfide (MoS2), a two-dimensional (2D) material, promises better desalination efficiency, benefiting from the small diffusion length. While the monolayer nanoporous MoS2 membrane has great potential in the reverse osmosis (RO) desalination membrane, multilayer MoS2 membranes are more feasible to synthesize and economical than the monolayer MoS2 membrane. Building on the monolayer MoS2 membrane knowledge, the effects of the multilayer MoS2 membrane in water desalination were explored, and the results showed that increasing the pore size from 3 to 6 Å resulted in higher permeability but with lower salt rejection. The salt rejection increases from 85% in a monolayer MoS2 membrane to about 98% in a trilayer MoS2 membrane. When averaged over all three types of membranes studied, the ions rejection follows the trend of trilayer > bilayer > monolayer. Besides, a narrow layer separation was found to play an important role in the successful rejection of salt ions in bilayer and trilayer membranes. This study aims to provide a collective understanding of this high permiselective MoS2 membrane's realization for water desalination, and the findings showed that the water permeability of the MoS2 monolayer membrane was in the order of magnitude greater than that of the conventional RO membrane and the nanoporous MoS2 membrane can have an important place in the purification of water.

Surface Modification of Reverse Osmosis Desalination Membranes with Zwitterionic Silane Compounds for Enhanced Organic Fouling Resistance

Surface Modification of Reverse Osmosis Desalination Membranes with Zwitterionic Silane Compounds for Enhanced Organic Fouling Resistance

Advanced Technologies for Stabilization and High Performance of Seawater RO Membrane Desalination Plants.

Seawater desalination plants that use reverse osmosis (RO) membranes have become a core part of social infrastructure, and should be designed to meet the needs of product water quality and production capacity, while considering various environmental factors such as the seawater quality, temperature and geographical features. Furthermore, stable operation while overcoming various problems should be achieved alongside the increasing demands for energy saving and cost reduction. As no universal plant apparatus and operation technology meets these various requirements, the plants need to be customized for individual solutions. This paper reviews and summarizes the proven technologies, including their advantages/disadvantages, and points to cutting-edge technologies related to the design and operation maintenance of seawater intake, pre-treatment and the RO desalination process.

Design of reverse osmosis membrane for softening of groundwater at site of agriculture College –University of Tikrit –Iraq by using ROSA-72 software

Abstract This research paper is accomplished for designing reverse osmosis membrane for desalination and softening of groundwater at Tikrit University Site. The raw groundwater has TDS ranged between 1570 and 2910 mg/L, temperature, (23–25)C pH(6.27–8.6), Electrical conductivity (3070–3620) µs/cm, Ca(492–640) mg/L, Mg(41–437) mg/L, Total hardness (1400–3400) mg/L, SO4 (700–1296) mg/L, NO3(18.5–40) mg/L. Dissolved oxygen (1.5–4.5) mg/L and Turbidity (1.3–5)NTU. ROSA72, Reverse Osmosis System Analysis is applied to design the reverse osmosis system for softening the groundwater. The result showed reliable design criteria and high quality water which are feed water 0.3 m3/h, feed press 7.91 bar, concentration flow 0.26 m3/h ,membrane area 2.6 m2 permeate flow 0.05 m3/h. water recovery 15%, permeate TDS 39.41 mg/L. ROSA-72 software can be used efficiently in design of reverse osmosis systems.

Highly permeable thin film composite hollow fiber membranes for brackish water desalination by incorporating amino functionalized carbon quantum dots and hypochlorite treatment

A novel strategy has been demonstrated to synergistically improve the separation performance of thin film composite (TFC) hollow fiber membranes for brackish water reverse osmosis (BWRO) desalination. It consists of two steps. Firstly, a series of amino functionalized carbon quantum dots (CQDs) were synthesized and incorporated into the polyamide layer of TFC membranes. The modified TFC membrane with the optimal amino functionalized CQDs has a pure water permeability (PWP) of 5.50 LMH/bar and a NaCl rejection of 98.0% against a 2000 ppm NaCl feed solution at 15 bar. Comparing with the unmodified TFC membrane, the modified TFC membrane has a 42.1% higher PWP without compromising the salt rejection. Then the modified TFC membrane was treated by a sodium hypochlorite solution at different concentrations. Chlorine was bonded to the polyamide layers, enhancing their repulsion against charged solutes and making the polyamide network less cross-linked. As a result, both PWP and NaCl rejection of the TFC membranes could be improved. After being treated with a sodium hypochlorite aqueous solution at 4000 ppm for 3h, the aforementioned modified TFC membrane displays a PWP of 10.13 LMH/bar and a NaCl rejection of 98.9% against a 2000 ppm NaCl solution at 15 bar, which demonstrates a great potential for brackish water desalination. This study may mark a milestone for the development of future BWRO membranes based on the use of amino functionalized CQDs and hypochlorite treatment.

Sulfonated Phthalocyanine Redox Flow Cell for High-Performance Electrochemical Water Desalination

A reliable clean water supply is now one important and challenging issue for the human society. With the facts that only 0.4% of the water on earth is readily drinkable and 98% of the water is saltwater, water desalination for clean water production has become a key strategic solution to satisfy the increasing global water demand. Over the years, different saltwater desalination technologies were researched and developed, including reverse osmosis membrane desalination (RO), electrodialysis (ED), capacitive desalination (CDI) and multi-effect distillation (MED). However, some inherent technical issues, like high operation cost, large capital cost and/or low desalination capacity, associate with these existing technologies that lead to a high clean water production cost and limit their applications. Thus, there is a need of new water desalination technology that can purify saltwater with low cost and high efficiency.In this work we report a new water-soluble nickel phthalocyanine tetrasulfonic acid tetrasodium salt (NiPcTATS)-based redox flow desalination battery (RFDB) for safe, effective and efficient water-salt separation. The fabricated RFDB cell exhibited a high desalination rate at 3.4 gNaCl/(molNiPcTATS∙hr) even with a low 0.5 V cell voltage and required as low as 11.5 kJ/mol salt in energy consumption. The cell showed excellent reversibility and durability for long-term operation, benefiting from the fast-redox kinetics and chemical stability of the redox couple. With no consumption of the redox couple and energy recovery during the salination process, this new method provides a continuous desalination capability with unlimited salt removal capacity. We also demonstrated the use of simple solar panel for effectively driving the RFDB cell, proving it a promising and practical technology for clean water production in remote places like islands and ships.

Identification of bacterial biofilms on desalination reverse osmosis membranes from the mediterranean sea

Nanofiltration and reverse osmosis are two of the most effective surface water treatment processes. They provide water of high quality and eliminate a large amount of microorganisms, organic matter and micropollutants. However, the main limitation of membrane nanofiltration is fouling, which imposes an additional cost. This study focused on the search for microorganisms capable of reducing the performance of nanofilters and also to study autoaggregation and biofilms formation by bacterial strains isolated from the nanomembranes used in the seawater desalination plant of Souk Tlata (Algeria). It provides new microbiological data on the desalination of seawater in the southern Mediterranean basin. The results revealed 14 bacterial species isolated from six fouled reverse osmosis membranes; their quantities were significant with the dominance of Raoultella sp., Klebsiella sp., Staphylococcus sp., Stenotrophomonas sp., Micrococcus sp., and Escherichia coli. In addition, electron imaging of nanomembrane surfaces revealed complex structures of microorganisms forming biofilms.

High performance polyester reverse osmosis desalination membrane with chlorine resistance

Chlorination is a common practice to prevent biofouling in municipal water supplies, wastewater reuse and seawater desalination. However, polyamide thin-film composite reverse osmosis membranes—the premier technology for desalination and clean-water production—structurally deteriorate when continually exposed to chlorine species. Here, we use layer-by-layer interfacial polymerization of 3,5-dihydroxybenzoic acid with trimesoyl chloride to fabricate a polyester thin-film composite reverse osmosis membrane that is chlorine-resistant in neutral and acidic conditions. Strong steric hindrance and an electron-withdrawing group effectively prevent direct aromatic chlorination, and residual OH groups capped with isophthaloyl dichloride preclude reaction with active chlorine. The poly(isophthalester) membrane exhibits high salt rejection (99.1 ± 0.2%) and water permeability (2.97 ± 0.13 l m−2 h−1 bar−1), even after demonstrating biofouling prevention with chlorine (50 mg l−1 of NaOCl for 15 min). We anticipate that our chlorine-resistant membrane will greatly advance reverse osmosis desalination as a sustainable technology to meet the global challenge of water supply. Reverse osmosis membranes are the primary technology used for desalination and wastewater recycling, but they are prone to biofouling and subsequent performance deterioration due to poor tolerance to disinfecting agents such as chlorine. Here a chlorine-resistant polyester reverse osmosis membrane is developed to prevent biofouling and increase the sustainability of desalination and wastewater reuse.