Reverse Flow Research Articles

Feasibility, safety, and clinical outcomes of modified laparoscopic cervicoisthmic cerclage for refractory cervical insufficiency: A single-arm clinical trial-Part 1.

To assess the feasibility, safety, and outcomes of modified laparoscopic transabdominal cerclage in patients with refractory cervical insufficiency. This single-arm clinical trial examined women with refractory cervical insufficiency who underwent modified laparoscopic transabdominal cerclage at a specialized center in Japan between December 2017 and May 2022. Various parameters related to patient demographics, surgical techniques, outcomes, and complications were evaluated. The study enrolled 30 women with a median age of 36 years. The modified laparoscopic transabdominal cerclage was technically successful in all cases. The delivery rate and fetal survival rate at 28 days in the third trimester were both 93%. Surgical complication involving small bowel injury occurred in one case and was promptly repaired. No fetal complications or pregnancy losses occurred within 28 days of the procedure. Perinatal outcomes included a cesarean section rate of 93%, a neonatal intensive care unit admission rate of 30%, and an overall fetal survival rate of 93%. Additionally, no absence or reversal of end-diastolic flow in the uterine artery was identified at the time of cerclage in any of the cases. This study demonstrated the feasibility and safety of modified laparoscopic transabdominal cerclage for refractory cervical insufficiency. The procedure achieved a high delivery rate in the third trimester and a good overall fetal survival rate. The study findings highlight the importance of anatomical precision during thread placement in modified laparoscopic transabdominal cerclage. This technique is promising for treating refractory cervical insufficiency and potentially preventing second-trimester losses and extreme preterm births.

Impact of Gas Accumulation on the Stability of Parallel Upward Ventilation in High-Temperature Sloped Shafts of Deep Wells

To explore the causes and influencing factors of wind flow oscillations in high-temperature inclined aisles of deep wells under parallel upward ventilation, this study conducts a comprehensive investigation using theoretical analysis and numerical simulations. Based on the kinetic analysis of gas flow, a discriminant formula for wind flow reversal in the side branch is derived. Further analysis identifies initial wind speed and branch length as key factors influencing the reversal. Both gas pressure and thermal pressure contribute to wind flow reversal in the side branch, and the opposing directions of these pressures cause high-temperature gas to periodically flow between the two branches, resulting in wind flow oscillations. A higher initial wind speed can effectively reduce the oscillation amplitude due to increased initial kinetic energy and a larger pressure difference, but it does not extend the oscillation duration. Increasing the branch length can suppress wind flow oscillations by increasing airflow frictional resistance and damping.

Stability Analysis of Hybrid Nanofluid with Inclined MHD and Joule Effects: Flow Reversal and Flow Separation

Stability Analysis of Hybrid Nanofluid with Inclined MHD and Joule Effects: Flow Reversal and Flow Separation

Strategic Dual Approach for the Management of a Symptomatic Giant Partially Thrombosed Aneurysm at the Basilar Tip - Integrating Intrasaccular Flow Diversion and Endovascular Flow Reversal.

Managing giant partially thrombosed intracranial aneurysms presents significant challenges due to their unfavorable natural history and the lack of standardized treatment approaches. Conventional treatments, whether open surgical or endovascular, often struggle to manage these aneurysms effectively, resulting in high recurrence rates or significant morbidity. The patient was a 62-year-old male with a symptomatic giant partially thrombosed aneurysm at the tip of the basilar artery, presenting with left-sided hemiparesis and dysarthria. Diagnostic imaging revealed a giant aneurysm with a wide-necked, canalized portion. A two-stage endovascular treatment was conducted, involving a balloon occlusion test (BOT) and intraoperative monitoring (IOM) for maximum patient safety. The treatment utilized stent-assisted Woven EndoBridge (WEB) embolization and serial bilateral vertebral artery trapping. The procedure successfully isolated the aneurysm and postoperative imaging confirmed the absence of recanalization, preserving the intact posterior circulation. The patient showed stable recovery and no neurological deficits during the 12-month follow-up period. This technical note demonstrates the feasibility and efficacy of strategically integrating intrasaccular flow diversion using a WEB device and flow reversal through bilateral vertebral artery trapping for treating giant partially thrombosed aneurysms.

Significance of heat transfer in a reversible esterification of Arrhenius activation energy with partial slip

The significance of heat transfer during a reversible esterification process in a magnetohydrodynamic boundary layer Casson fluid flow along a vertical stretching plate is examined. The multi-slip conditions are considered in a porous medium. The presence of chemical process requiring an activation energy is considered in the analysis. The study also investigates the hydromagnetic boundary layer Casson fluid flow alongwith partial slip conditions across a vertical stretching plate. The incorporation of multi-slip constraints in a porous medium, alongside magnetic fields and other parameters, highlights its relevance in diverse engineering fields such as thermal engineering, polymerization, and biodiesel industries. Understanding the characteristics of such fluids under complex conditions is vital for optimizing heat and mass transfer in industrial applications, making this investigation timely and valuable. The nonlinear differential set of equations are solved numerically involving Runge Kutta based shooting approach of fourth order and the results are verified with the bvp4c tool and the findings are explored using graphical plots. The predominance of significant factors on flow configurations are analyzed and presented in graphs and tables. A comprehensive analysis is provided on the effects on velocity, concentration, and temperature of diverse parameters such as reaction rate constant, magnetic parameter, suction parameter, mass Grashof number, Prandtl number, Casson parameter, thermal radiation parameter and slip parameters. The tabular representation of the adverse effects of drag coefficient, rate of mass transfer and Nusselt number on flow configurations for various significant parameters is presented. It is inferred that for the case of reversible and irreversible flows, the shear stress rate escalates by 29% when the magnetic parameter elevates from 0.5 to 1.5 and about 35% when the Casson parameter elevates from 0.5 to 1.5. For the suction parameter, the coefficient of drag increased by 27% and 26% for irreversible and reversible flows respectively. When the reaction rate increases from 0.5 to 1.5, the rate of shear stress elevates by 0.5% and 0.02% for irreversible and reversible flows in order. The Nusselt number decreased about 7% and 8% when the magnetic parameter and Casson parameter rises from 0.5 to 1.5 respectively, for irreversible and reversible flows. It is noteworthy that the previous studies are in precise agreement with the present investigation.

Study of unsteady shear flow near stall in a shrouded supercritical carbon dioxide centrifugal compressor

This study investigates the unsteady shear flow patterns and their relation with the aerodynamic instability of a shrouded supercritical carbon dioxide (SCO2) centrifugal compressor impeller using the dynamic mode decomposition method combined with detached eddy simulation. The results demonstrate that discrete shedding vortex array in the blade tip region is the dominant mode of the SCO2 shrouded centrifugal compressor impeller, with a frequency of 0.5 times the blade passing frequency. In contrast, the main flow structures in the identical impeller using ideal air consist of small-scale shedding vortices near the suction surface and the separated secondary flow. Further analysis of flow field details indicates that the shedding vortex structure inside the shrouded centrifugal impeller originates from the Kelvin–Helmholtz instability generated on the shear interface between the mainstream and the recirculation flow. The greater shear intensity within the SCO2 centrifugal impeller is the reason for the evident occurrence of vortex shedding phenomena in its flow field. Additionally, during the transition from near-stall to stall, vortex pairing phenomena happens at the throat of the centrifugal impeller due to evolutional behaviors of the vortexes. The occurrence of vortex pairing leads to faster blockage of the blade tip region and then the secondary flow spillage over to adjacent passage, ultimately resulting in reverse flow in the blade tip region and extensive blockage at the impeller inlet. The unsteady shear flow evolution clearly demonstrates the processes of stall in SCO2 shrouded impellers.

Forced flow reversal in ferrofluidic Couette flow via alternating magnetic field

Time-dependent boundary conditions are very common in natural and industrial flows and by far no exception. An example of this is the movement of a magnetic fluid forced due to temporal modulations. In this study, we used numerical methods to examine the dynamics of ferrofluidic wavy vortex flows (WVF2, with dominant azimuthal wavenumber m=2) in the counter-rotating Taylor–Couette system, which was subjected to time-periodic modulation/forcing in a spatially homogeneous magnetic field. In the absence of a magnetic field, all WVF2 states move in the opposite direction to the rotation of the inner cylinder, they are retrograde. However, when strength or frequency of the alternating magnetic field increases, the motion direction of the flow pattern changes. Thus, the alternating field provides a precise and controllable key parameter for triggering the system response and controlling the flow. Aside, we also observed intermittent behavior when one solution became unstable, leading to random transitions in both, the transition time and toward the different final solutions. Our findings suggest that, in ferrofluids, flow pattern reversal can be induced by varying a magnetic field in a controlled manner, which may have applications in the development of modern fluid devices in laboratory experiments. These findings provide a framework to study other types of magnetic flows driven by time-dependent forcing.

Abatement of Volatile Organic Compounds (VOCs) and Fluorine gases by a Microwave Plasma Torch (MPT)

The use of microwave plasma torch (MPT) in the abatement of potent greenhouse and fluorinated (F-gases) gases is crucial due to their high global warming potential. The purpose of this study was the abatement of volatile organic compounds (VOCs) and carbon tetrafluoride (CF4) using specifically designed reverse vortex flow reactor (RVR) and pillar of fire reactor (POF). The RVR has properties that are crucial for their synergistic effects with the MPT, and the POF configurations showed high-efficiency combustion due to plasma radicals and a large contact area with the MPT. The study used Aspen Plus and COMSOL software to analyse the mass balance involved in the thermal decomposition of isopropyl alcohol (C₃H₈O) and CF4 and to design the RVR and POF reactors. Using MPT without hydrocarbon fuel, low-concentration C₃H₈O and CF4 were successfully destroyed in high-flow streams. The experiment on C₃H₈O showed that using a plasma power of 2kW and 1 cubic meter per minute (CMM) of bulk gas, a destruction removal efficiency (DRE) of 95% was achieved for a polluted C₃H₈O of 410 ppm. In a second experiment, a DRE of 94% was achieved for a polluted C₃H₈O of 370 ppm. The first CF4 experiment achieved a DRE of 93.3% with a 7kW plasma power and 1 CMM bulk gas polluted at 285 ppm. In the second experiment, the presence of highly reactive hydroxyl radicals (OH⁎) in steam plasma improved the DRE to 99.8% at 7kW plasma power and 100 LPM bulk polluted at 180 ppm.

Large eddy simulation of droplet dispersion and deposition over street canyons

Predicting droplet transport in the atmosphere is a major issue for a large number of dispersion problems such as spray cooling systems in streets, urban lawn sprinklers [Milesi et al., “Interferometric laser imaging for respiratory droplets sizing,” Environ. Manage. 36, 426–438 (2005)], and dispersion of virus such as COVID or from a terrorist attack [Balachandar et al., “Host-to-host airborne transmission as a multiphase flow problem for science-based social guidelines,” Int. J. Multiphase Flow 132, 103439 (2020)]. Here, we investigate the propagation of droplets issued from a source near the ground between square obstacles with different spacings. The aerodynamic field is determined by large eddy simulation coupled with an immersed boundary method for the obstacles. Droplets are tracked by a Lagrangian approach. An evaporation model is used to account for varying humidity conditions. Droplet concentration, mass flux, and deposition rates are obtained for different evaporation conditions and obstacle spacings. The results show high deposition rates on the internal wall of the first obstacle due to droplet advection by the reverse flow of the primary vortex. In addition to this, droplets may escape the canyon and propagate downstream as far as eight times the obstacle distance (8H). The concentration of air-borne droplets downstream the canyon is higher for smaller street canyon openings. When evaporation is accounted for, the ground-level droplet concentration may be reduced by up to 30% in the case of small canyon openings.

A simulation study on the influence of marginal pinching upon liquid film dynamics

In fluid dynamics, the generation and bursting of surface bubble liquid films in surfactant-laden environments involve complex phenomena, one of which is marginal pinching at the film's foot—a crucial yet inadequately understood aspect due to experimental limitations. Considering its profound impact on liquid film drainage and lifetime, we utilize high-resolution numerical simulations incorporating a weakly compressible scheme and adaptive mesh refinement to dissect the marginal pinching dynamics with unprecedented detail. Our approach elucidates the pinching dynamics and tracks the evolution of film thickness during the critical late-stage drainage process. By leveraging detailed geometric data from pinched regions, we significantly refine existing drainage models, enhancing their predictive accuracy regarding rupture thickness and film lifetime across various viscosities, surfactant concentrations, and bubble sizes. This refined model demonstrates robust alignment with our simulation results. Furthermore, we establish a quantifiable relationship between the prefactor governing reverse flow induced by the Marangoni effect and surfactant concentration. The methodologies and findings of this study provide foundational knowledge that paves the way for optimized industrial processes and an enhanced understanding of natural phenomena.

Noninvasive Tools to Predict Necrotizing Enterocolitis in Infants with Congenital Heart Diseases: A Narrative Review

Background: Necrotizing enterocolitis (NEC) is the most frightening gastrointestinal emergency in newborns. Despite being primarily a disease of premature infants, neonates with congenital heart disease (CHD) are at increased risk of development. Acute and chronic hemodynamic changes in this population may lead to mesenteric circulatory insufficiency. Objectives: In this narrative review, we describe monitoring tools, alone or in multimodal use, that may help in the early recognition of patients with CHD at major risk of NEC development. Methods: We focused on vital parameters, echocardiography, Doppler flowmetry, abdominal near-infrared spectroscopy (aNIRS), and abdominal ultrasound (aUS). Results: The number of studies on this topic is small and includes a wide range of patients’ ages and types of CHD. Peripheral oxygen saturation (SpO2) and certain echocardiographic indices (antegrade and retrograde velocity time integral, cardiac output, etc.) do not seem to differentiate infants with further onset of NEC from those not developing it. Hypotensive events, persistent diastolic flow reversal in the descending aorta, and low mesenteric oxygen saturation (rsSO2) measured by aNIRS appear to occur more frequently in infants who later develop NEC. aUS may be helpful in the diagnosis of cardiac NEC, potentially showing air contrast tracked to the right atrium in the presence of pneumatosis. Conclusions: This narrative review describes the current knowledge on bedside tools for the early prediction of cardiac NEC. Future research needs to further explore the use of easy-to-learn, reproducible instruments to assist patient status and monitor patient trends.

Novel Fluidic Oscillator Evaluation Considering Dimensional Modifications

Although flow mixing and cooling can be greatly enhanced when considering the use of fluidic oscillators (FOs), they are more commonly employed in active flow control (AFC) applications where the injected pulsating flow interacts with the boundary layer, usually in order to delay its separation. In fact, prior to any FO implementation in a given application, it is essential to study the range of frequencies and amplitudes it can generate as a function of the incoming mass flow and its dimensions. This is what is being performed in the present manuscript for a rather novel FO configuration. A numerical study of a standard three-dimensional (3D) FO configuration, and also using a two-dimensional (2D) approach, is initially presented. After comparing the 3D and the 2D results and analyzing the main differences, we modified some of the internal dimensions of the FO in order to evaluate the variation in its dynamic performance. The present results clarify which internal dimensional modifications are more effective in generating larger output frequencies and velocity field variations. Care is taken to analyze the origin of self-sustained oscillations. This paper links, for the first time, the origin of the pressure force oscillations at the feedback channel’s outlet, with the interaction of the mixing chamber central jet and the reverse feedback channel flow at the mixing chamber’s converging walls. A novel equation relating the FO outlet mass flow frequency with the time-averaged FC reverse flow is presented and discussed. In fact, the present study needs to be seen as the continuation of a former one, recently published by authors, where the effects of several Reynolds numbers as well as some different internal dimensions were considered.

A closed-loop dual-channel supply chain network for leather products: An integrated simulation optimization clustering approach

The leather industry is pivotal to the economic development of certain countries; however, it also poses significant environmental challenges. Thus, this study aims to design a closed-loop leather supply chain network that incorporates waste recycling and product regeneration processes. In light of the growing prevalence of both in-store and online shopping, the concept of a dual-channel supply chain is examined. Furthermore, as advertising through traditional and social media continues to expand, this research uniquely investigates the impact of two advertising modalities—SMS and social networks—alongside the design and layout of retail environments, considering their effects on product sales within the supply chain context. Additionally, outlet stores are integrated into the model to facilitate the sale of products that may become outdated over time, thereby enhancing the model's real-world applicability. To achieve this, a multi-product, multi-period mathematical model is developed to minimize costs and maximize customer responsiveness in both forward and reverse supply chain flows. The K-means clustering method is employed to categorize customers based on recency, frequency, and monetary (RFM) features. Through simulation, demand parameters are derived for each customer cluster across various scenarios. Moreover, the Aghezzaf approach is utilized to address scenario-based uncertainties within the model, and the proposed multi-objective model is solved using the Augmented Epsilon constraint method. A real-world case study is conducted to apply the proposed model, and critical parameters are examined through sensitivity analysis to validate its effectiveness. The findings suggest that incorporating return flows into the supply chain can significantly enhance both producer profitability and customer responsiveness regarding leather products.

Analyzing the influence of electric vehicle charging scheduling on distribution transformer lifespan

The ongoing growth in global electricity demand and rapid proliferation of electric vehicles (EVs) are posing challenges to the operation of the low voltage power networks and their components. This study aims to analyze the impacts of peak-load demand on the distribution transformers, considering mild and extreme combinations of electric energy demand and localized charging of plug-in EVs under their different penetration levels, hypothesizing that shifting the demand for charging throughout the day can reduce the aging of distribution transformers. The proposed method employs a fuzzy-logic-based tool, which incorporates the influence of ambient temperature, higher harmonics, reactive power compensation, reverse power flows, and overload. Three different charging/discharging modes have been considered: demand charging, off-peak charging, and synergy of off-peak charging and vehicle-to-house technology. The results indicate that off-peak charging emerges as 2.1 times more effective than demand charging in terms of the transformer's loss of life, particularly for ultimate EV penetration of 100 %. It is demonstrated that the utilization of charging scheduling for EVs should be prioritized to defer costly system upgrades and reinforcements, particularly when EV penetration exceeds 50 %.

Capture and catalytic conversion of CO2 from marine and offshore applications – A review

Abstract This contribution examines recent advances in modeling fluid dynamics and capture/conversion of CO2 from marine and offshore applications in packed-bed columns/trickle-bed reactors subjected to static inclination, externally-induced rolling and heaving motions. Breaking the axial symmetry of the two-phase flow once the packed bed system is tilted results in a significant decrease in process performance, the extent of which is determined by the magnitude of the tilt and the column/reactor diameter. Only the conversion of CO2 from marine engine emissions on-board large cargo ships via catalytic cycloaddition of CO2 to styrene oxide in multiphase large-diameter trickle-bed reactors increases slightly with increasing reactor inclination. Under the externally induced column/reactor oscillations, CO2 capture/conversion performance shifts toward the steady-state solution of the vertical column/reactor as the asymmetry between the two inclined positions decreases. Oscillating (between two inclined symmetrical positions) and heaving packed-bed columns/trickle-bed reactors generate an oscillating performance around the steady-state solution of the vertical static position, which is driven by the amplitude and period of the angular and heaving motions via the continuous evolution of the intensity of the reverse secondary flow and by the magnitude of the reactor/column diameter. The catalytic conversion of CO2 captured from marine emissions via an integrated process coupling reverse water-gas shift reaction and methanol synthesis in a fixed-bed reactors network system shows a remarkable enhancement with the addition of H2O adsorbent to the reaction systems in the sorption-enhanced process periods.

Diagnostic performance of semi-quantitative echocardiographic evaluation in patients with aortic regurgitation: implications for clinical practice

Abstract Background In current practice, screening for severe aortic regurgitation (AR) relies on qualitative and semi-quantitative echocardiographic parameters. No information is given on the diagnostic performance of each of these parameters. Objectives The purpose of this study was to investigate the diagnostic performance of semi-quantitative echocardiographic parameters in discriminating moderate from severe AR. Methods This single-center retrospective cohort study included 102 consecutive patients with chronic isolated moderate or severe AR. Patients were divided between severe and moderate AR using a combination of left ventricle (LV) dilatation, Proximal Isovelocity Surface Area (PISA) echocardiographic method and cardiovascular magnetic resonance (CMR). Receiver operator characteristic (ROC) curve analysis was performed to assess the diagnostic accuracy of vena contracta width (VC), pressure half-time (PHT) and diastolic flow reversal in descending aorta (DFR). Results Threshold value VC > 6mm provided a low sensitivity (40.4%) and an excellent 88.9% specificity for the diagnosis of severe AR. For PHT, the value < 200ms provided a poor sensitivity (2.0%) and an excellent 100% specificity. For DFR, the value ≥ 0.2m/s provided a low sensitivity (37.8%) and a good 78.6% specificity. These 3 parameters have a good positive predictive value (PPV) > 80% and a poor negative predictive value (NPV) < 40%. The area under the curve for the diagnosis of severe AR was 0.72, 0.72 and 0.59 for VC, PHT and DFR, respectively. Conclusion Our study demonstrates that the semi-quantitative parameters VC, PHT and DFR are highly specific but poorly sensitive for diagnosing severe chronic AR. They can rule in severe AR but in presence of intermediate values, they are insufficient to rule out severe AR.Venn diagramDiagnostic performance

Impact of systolic coronary flow reversal in patients with aortic stenosis: assessment with transthoracic echocardiography

Abstract Background In patients with aortic stenosis (AS), increased systolic wall stress due to increased afterload reduces systolic coronary flow, often leading to systolic coronary flow reversal (SFR) in epicardial coronary arteries. Purpose We used transthoracic echocardiography (TTE) to evaluate severity of AS, left ventricular function, and coronary flow, and investigated echocardiographic indicators associated with SFR. Methods We prospectively evaluated consecutively presenting patients who visited our valvular heart disease outpatient clinic or were admitted to our hospital for investigation of AS (July 2023 to February 2024). Based on ESC guidelines, severity of AS and the left ventricular function were assessed with TTE. At the same time, TTE was used to measure distal left anterior descending coronary artery flow. SFR was defined as the presence of a reversal coronary flow component in systole. Based on the presence or absence of SFR in coronary flow measurements, patients were classified into SFR+ or SFR− groups. The inclusion criteria were AS of moderate or greater severity, and the exclusion criteria were known coronary stenosis and the inability to assess coronary flow. Results Enrolled 28 patients were classified into SFR+ (7 patients) and SFR − (21 patients) groups. Comparing baseline characteristics between the SFR+ and SFR− groups, although there were no significant differences in left ventricular indicators such as left ventricular mass index, left ventricular ejection fraction, stroke volume index, and E/e’ between the two groups, left ventricular global longitudinal strain was significantly lower in the SFR+ group (12.0±3.1%, 14.9±3.0%, p=0.026) (Table 1). Regarding indexes of AS assessment, aortic valve peak velocity and aortic valve mean pressure gradient values were significantly higher in the SFR+ group than in the SFR − group ([475±68 cm/s, 379±55 cm/s, p<0.001] and [56.2±16.5 mm Hg, 34.8±10.5 mm Hg, p<0.001], respectively) (Table 1). Representative cases show Figure 1. Conclusion The presence of SFR in patients with AS assessed using TTE may be a simple echocardiographic index that may be associated with potential decline in left ventricular function and progression of AS.

Reversible esterification process in Casson nanofluids: A numerical analysis of non-newtonian hydromagnetic flow

A computational mechanism has been formulated to scientifically analyze the phenomenon of combined convection in the occurrence of magnetohydrodynamic flow behavior of Casson nanofluid. This study emphasizes the trajectory of the nanofluid along a stretching sheet with nonlinear permeability, while considering additional physical effects such as reversible chemical reaction, thermal radiation, energy source/sink, suction and viscous dissipation. In this study, we have additionally integrated the nanofluid paradigm proposed by Buongiorno, which encompasses the repercussion of thermophoresis along with Brownian motion. The utilization of appropriate similarity renovations serves the purpose of recasting the dominant multivariate differential equations to a collection of nonlinear differential equations in single variable. The Runge–Kutta shooting mechanism is implemented for the intention of numerically determining the unknown boundary conditions. The solution to the dominant equations was obtained by employing the fourth-order Runge–Kutta technique and to ensure the dependability of the outcomes, the bvp4c method was employed. The graphical and tabulated observations are presented herein to facilitate a comprehensive analysis of the underlying physical characteristics inherent in the problem at hand. The utilization of the Casson parameter has been found to be advantageous in the reduction of shear stress rate, along with the enhancement of mass and energy transfer rates. Additionally, the application of suction has been observed to be beneficial in the enhancement of Sherwood number and energy transfer rate. Within the scope of the context of the esterification process, the purpose of this proposal is to evaluate the impact that numerous arithmetical values exert on the temperature field, the velocity profile and the volumetric concentration. An in-depth graphical analysis that takes into account the relevant physical consequences is used to evaluate the most important factors that relate to the physical quantities that describe the contours of temperature, velocity and concentration. In addition to being accompanied by their respective explanations, the tabular portrayal of the local Sherwood number, shear stress rate along with local Nusselt number all feature in this paper. There is a clear distinction that can be made between irreversible and reversible flows in the evaluation of the local Sherwood number, rate of shear stress and local Nusselt number. This differentiation is brought about by taking into analysis thermophoresis parameter, Brownian motion parameter and suction parameter. The results that were produced from the theoretical simulations have significant repercussions for a variety of fields that are related to energy engineering. The findings derived from the analysis indicate a negative correlation between the Brownian motion parameter and both irreversible and reversible flow in terms of rate of energy transfer and shear stress rate. It is imperative to highlight that reversible flow holds greater significance in comparison to irreversible flow.

ANALYTICAL STUDY ON FULLY DEVELOPED MIXED CONVECTION COUETTE FLOW IN A VERTICAL CHANNEL WITH VISCOUS DISSIPATION EFFECT

The study of mixed convection flow in a vertical channel with viscous dissipation has been examined. To solve the governing energy and momentum equations, the Homotopy perturbation method was employed. Graphs were generated to analyze the impact of the governing flow parameters. Numerical values for skin friction, rate of heat transfer, and mass flux were estimated. The study revealed that an increase in mixed convection expands the reverse flow region and raises the critical value of mixed convection that leads to flow reversal. Additionally, both fluid temperature and velocity rise with increased viscous dissipation, as higher viscous dissipative heat elevates temperature, subsequently increasing the buoyancy force.

Subsurface floats in the Filchner Trough provide the first direct under-ice tracks of the circulation on shelf

Abstract. Bottom water formation in the Weddell Sea and mass loss from the Filchner–Ronne Ice Shelf are tightly linked by the supply of Warm Deep Water to the continental shelf. Heavy sea ice cover and icebergs restrict ship access and upper-ocean measurements by moorings, compelling us to try new sampling methods. We present results from the first dedicated under-sea-ice float experiment tracking circulation on the continental shelf of the eastern Weddell Sea. Seven Apex profiling floats were deployed in 2017 at three different locations on the eastern Weddell Sea continental shelf, targeting the inflowing modified Warm Deep Water (mWDW), as well as the outflowing Ice Shelf Water (ISW). The floats capture a warm mWDW regime with southward inflow over the eastern continental shelf and a cold ISW regime with a recirculation of ISW in the Filchner Trough throughout the 4 years of observations. We provide the first Lagrangian in situ confirmation that the mWDW flowing onto the continental shelf follows two pathways: the eastern flank of the Filchner Trough and a small trough on the shallow shelf farther east. In the present circulation regime, this warm water is blocked from reaching the ice shelf cavity due to the presence of the thick ISW layer inside the Filchner Trough. The floats' trajectories and hydrography reveal the dynamically active front, flow reversal, and eddying motion between these two water masses along the eastern flank of the Filchner Trough.