Return Loss Research Articles

A review of 2.45 GHz microstrip patch antennas for wireless applications

Recently, microstrip patch antennas have become popular. Due to their ubiquity, these antennas have more uses every day. In this research paper, a 2.45 GHz microstrip patch antenna has been reviewed and analyzed. Different substrate materials have been used to make these antennas, and their thickness is different. Various antennas are designed based on the application, such as rectangular, square, triangle, ring, donut, and dipole. Other types of software were used to design the antenna, including CST, HFSS, MATLAB, ADS, and FEKO. Microstrip patch antenna design is a relatively new field of study for wireless applications. Several devices are linked to send or receive radio waves using a single antenna. Antennas designed for 2.45 GHz are used in various wireless communication systems, including television broadcasts, microwave ovens, mobile phones, wireless local area network (WLAN), Bluetooth, global positioning system (GPS), and two-way radios. This article looks at the geometric structures of antennas, including their many parameters and materials and the many different shapes they can take. In addition, the substrate materials, the loss tangent, the thickness, the return loss, the bandwidth, the voltage standing wave ratio (VSWR), the gain, and the directivity of previous articles will also be discussed.

Microstrip antenna system for communication capabilities applications

In this comparative study, seven different microstrip antenna shapes, including rectangular, elliptical, triangular, inset fed, H-notch, and E-notch, were observed and analyzed, focusing on their suitability for global positioning system (GPS) application in microsatellites. To enable meaningful comparison, the study utilized the optimal resonant frequency in GPS applications, which is 1.57542 GHz. All the antenna designs have been generated using MATLAB’s Antenna Toolbox and are 100% efficient under ideal conditions with zero polarization loss, which is assumed in the link budget analysis. The results show that each antenna shape has been found to offer distinct advantages and limitations. Along with this, the circular and elliptical patch antenna presented a well-balanced performance, which is suitable for GPS applications. However, the elliptical shape falls behind the circular shape, which was determined to be the most optimal choice for GPS application, providing excellent isotropic antenna gain, return loss, voltage standing wave ratio (VSWR), and strong link budget analysis results.

Design of higher gain linearly polarized 2×2 microstrip patch array antenna for wireless communication

The fifth-generation technology is popular and best as far as data rates are concerned for wireless applications. To meet the increased demand of the modern world for faithful communication, this research work is carried out. In this approach, a single patch, 1×2 array, and 2×2 array are designed using a low-cost FR4 dielectric substrate ( =4.4) covering the 3.3–3.8 GHz frequency band. Due to the lack of gain from arrays in the present research, an attempt is made to achieve excellent gain from arrays with a minimum number of patches. First, the gain of a single inset-fed antenna is compared with another normal single patch of the same thickness but with an additional air dielectric medium. Next, the second single patch is extended to obtain a rectangular 1×2 array and a 2×2 array antenna. A second single patch measuring 50×32.5×0.8 mm is designed assuming an infinite ground plane. It has 3mm air gap between the patch strip and the ground. Air acts as a second dielectric layer that reduces power loss. This allows a maximum gain of 15.2 dB with a return loss of -22 dB. Also, antenna efficiency and bandwidth are 91% and 267.69 MHz, respectively.

A super-compact wideband bandpass filter using capacitor-loaded coupled lines

Abstract A wideband bandpass filter (BPF) using capacitor-loaded coupled lines is proposed with super-compact circuit size and very simple structure. By loading three lumped capacitors in parallel to three same pairs of coupled lines, three transmission poles and four transmission zeros can be achieved and they can be calculated by input admittance derivation. To verify the design, a wideband BPF prototype with center frequency at 1.34 GHz is fabricated, whose measured 3-dB fractional bandwidth is 98.5 % (0.68–2 GHz), in-band insertion loss is less than 0.5 dB, return loss is greater than 17.5 dB, and circuit size is only 0.24 λ g × 0.02 λ g (λ g: guided wavelength at the center frequency).

A Compact GaN Power Amplifier Module for New Generation Cellular Basestations

This paper presents a compact class-AB Power Amplifier Module (PAM) designed for new generation massive Multiple Input Multiple Output (MiMo) cellular base stations. The module is designed at the center frequency of 3.5GHz targeting Long Term Evolution (LTE) and 5G New Radio (NR) bands. The module is a hybrid design that incorporates a Gallium Nitride (GaN) High Mobility-Electron Transistor (HEMT) die, discrete components-based input, and output matching networks. The entire design is realized on a 8.5 x 5.2 mm, 2-layer Rogers4003C substrate. The module is assembled on a PCB as an open-top for post-characterization tuning. The small signal and large signal measurements are in quite good agreement. The measurement results show that the amplifier is unconditionally stable, the input return loss is 12.2 dB, the output return loss is 7.7 dB, and the small signal gain is 13.4 dB. The saturated output power is 33.3 dBm with a Power Added Efficiency of 20.1%. The small signal gain drops to 11.2 dB at around 22 dBm of input power due to GaN technology’s intrinsic soft compression characteristics.

Microstrip Quasi-Elliptic Absorptive Bandpass Filter with Ultra-Wide Reflectionless Range and Compact Size

Absorptive bandpass filters (ABPFs) are highly attractive in modern microwave communication systems due to their ability to internally absorb the harmful stopband RF-power reflections. This paper reports an approach to designing quasi-elliptic ABPFs with ultra-wide reflectionless range, enhanced selectivity, and compact size. The method is realized based on a fourth-order quasi-elliptic absorptive lowpass filter (ALPF) prototype with a simplified structure. This ALPF prototype exhibits both good impedance-matching over the whole normalized frequency domain and an adjustable transmission zero close to the passband. By applying an equivalent impedance transformer model, a coupled-line-based ABPF scheme is devised from the ALPF prototype, which eliminates conventional dispersive transmission line inverters, resulting in an ultra-wide reflectionless range and a compact size. Closed-form equations are derived to support the filter synthesis. A 2.45 GHz microstrip ABPF with 30% fractional bandwidth is designed for verification. The measured minimum in-band insertion loss is 0.83 dB and the reflectionless range of return loss better than 10 dB is from DC to 12.88 GHz. Both the upper and lower stopband suppression exceed 20 dB, with the upper stopband extending up to 6.80 GHz. The upper and lower out-of-band roll-off rates are 93.9 and 121.4 dB/GHz, respectively. The overall circuit size is 0.12 λg2.

Designing a High Gain Rectangular Microstrip Patch Antenna Working at 3 GHz for RADAR

This study presents the design and analysis of a microstrip patch antenna optimized for radar applications operating at a frequency of 3 GHz. The antenna is designed to meet the requirements of radar systems, offering characteristics such as high gain, low profile, and broad bandwidth. The design process involves simulation using electromagnetic simulation software to achieve the desired antenna performance parameters. Various antenna parameters, including substrate material selection, patch dimensions, feeding techniques, and impedance matching networks, are carefully optimized to enhance antenna performance. The proposed antenna design is expected to exhibit excellent radiation characteristics, making it suitable for radar applications requiring reliable and efficient communication at 3 GHz frequency. This antenna designed for operating at 3 GHz, type Rogers Ultralam1217 (tm) with dielectric constant, ∈r= 2.2 tanδ (0.0009) and thickness of h = 1.6mm. The antennas are simulated using Ansys HFSS software. The performance is evaluated in terms of return loss, gain, and directivity and is deemed to be compatible with simulations.

A compact, low‐loss, and wide passband ratio substrate integrated waveguide triplexer based on complementary split ring resonators for multiband applications

SummaryIn this paper, a design of a substrate‐integrated waveguide (SIW) triplexer with improved low‐loss performance, passband ratio, and compactness based on the complementary split ring resonator (CSRR) structure is presented. The proposed triplexer operates at three passbands of 6, 8, and 10 GHz that correspond to the passband ratios of 1.33 and 1.67. By appropriately designing square CSRRs on the surface of the SIW structure, the low‐loss and compact resonator filters below the cut‐off frequency of the SIW at each operation frequency can be realized. The wide passband ratio is obtainable by adjusting the dimensions of the T‐junction. The measured results show the minimum insertion losses of 1.5, 1.4, and 1.9 dB at 6, 8, and 10 GHz, respectively. In addition, the minimum measured return losses are −9.33, −11.3, and −12.4 dB at the corresponding three passbands. The measured isolation between output ports is better than −17 dB in the frequency range from 5 to 11 GHz. The measured results agree well with simulations which are conducted by the CST Microwave Studio simulator. The proposed triplexer is designed on a cost‐effective RO4003C substrate with a compact size of 35 25 mm2

Design and development of square stub loaded band pass filter with quality factor analysis

In this paper, a compact square stub-loaded band pass filter (BPF) is designed and investigated for quality factor improvement analysis. A detailed analysis has been presented to demonstrate the superior power handling capability of the proposed microstrip bandpass filter without any degradation in its electrical performance parameters. For this purpose, square-type stubs are incorporated in the proposed bandpass filter which reduced the maximum peak voltage and increased the high peak threshold, instead of using sharp edges. Also, an in-depth analysis of peak voltage with a center frequency of 2.1 and 4.2 have been carried out by considering some parameters like pressure and quality. The proposed bandpass filter shows minimum peak voltage of 1.61 V and 1.59 V across the frequency of 2.1 GHz and 4.2 GHz which covers the application of mobile and radio altimeters. The designed BPF shows the minimum heat generation of 0.29 and 0.89 per watt at the resonating frequencies of 2.1 and 4.2 GHz. Furthermore, the proposed bandpass filter presents an in-depth analysis of several characteristic parameters such as return loss, insertion loss, power loss, delay in group and phase, current distribution, H and E field distribution and maximum power loaded and unloaded quality factor.

Novel energy harvesting microstrip Lowpass-Bandpass diplexer with an Ultra-Compact size for GSM and 5G communication systems

A new microstrip layout is proposed to design an ultra-compact lowpass-bandpass diplexer. This structure includes a basic bandpass resonator (BPR) in which, a lowpass filter (LPF) is embedded. Accordingly, it occupies an area of 0.008 λg2 that is the smallest compared to earlier reported lowpass-bandpass diplexers mentioned in this work. Moreover, at the lower and upper passbands, it has low insertion losses of 0.006 dB and 0.1 dB respectively. Meanwhile, the return loss at both channels reaches 30 dB. Having low losses makes it suitable for energy harvesting applications. The cut-off frequency of its lowpass channel is located at 0.93 GHz, while the bandpass section resonates at 2.05 GHz. Therefore, it can be used for GSM and 5G applications. Another advantage of this diplexer is its suppressed harmonics from the 1st to the 4th. To design this diplexer, a comprehensive mathematical analysis is performed on the basic structure. Our designed diplexer is fabricated and measured. The simulated scattering parameters and extracted data through direct testing are close to each other with good accuracy.

High Directivity Microstrip Patch Antenna design using Binary Ebola Search Optimization for Radio Frequency Identification Application

Microstrip patch antenna has gained significant popularity in wireless communication field, because of its compact size, less profile, and ease of installation. It is widely used in various applications such as Radio-Frequency Identification (RFID) systems, where dependable and long-range communication is made possible by the great directivity and efficiency. In this manuscript, a High Directivity Microstrip Patch Antenna design using Binary Ebola Search Optimization for Radio Frequency Identification Application (MPA-RFID-BESO) is proposed.The design of microstrip patch antennas is the difficulty in achieving high directivity while maintaining compact size and low profile. This research explains design and application-specific optimisation of the Microstrip Patch Antenna (MPA) of biomedical utilizing Binary Ebola Search optimization (BESO) algorithm. Microstrip patch antenna is designed to function in double and multi band applications due to its low cost, light weight, and ease of installation. MPA is made with flawed ground construction to lessen cross-polarized radiation emitted by microstrip patches and to achieve the necessary radiation parameters. Here, the cost of the materials is reduced by using a liquid crystal polymer substrate, and aerial performance is enhanced by using the appropriate geometrical parameters. The small design of the BESO optimised improves the performance of antenna as 50mm×50mm compact size. The MATLAB program uses high frequency to do the simulation method. The proposed antenna design is a preferable option for applications involving Radio Frequency Identification (RFID). The performance metrics, such as radiation pattern, constant gain, directivity, bandwidth, and antenna efficiency and return loss are measured and compared to the existing techniques. The proposed MPA-BA-BESO design provides 10.51%, 12.85% and 16.04% higher bandwidth and 23.63%, 47.86% and 32.06% higher gain compared with existing designs, like Designing MPA utilizing Moth–Flame optimization approach (MPA-UWB-MFOA), Predicting Rectangular Patch Microstrip Antenna Dimension utilizing Machine Learning (MPA-ANN), Dual Band Antenna Design and Prediction of Resonance Frequency Utilizing Machine Learning Algorithms (DBAD-RF-CNN) respectively. The proposed technology serve as a better design alternative for microstrip patch antennas in communication systems to address biological applications.

An S–K Band 6-Bit Digital Step Attenuator with Ultra Low Insertion Loss and RMS Amplitude Error in 0.25 μm GaAs p-HEMT Technology

An S–K Band 6-Bit Digital Step Attenuator with Ultra Low Insertion Loss and RMS Amplitude Error in 0.25 μm GaAs p-HEMT Technology

Frequency selective asymmetric coupled-fed (ACS) antenna using additive manufacturing

In this study, the development of diverse antenna designs using additive manufacturing processes, specifically spanning from L-band to K-band is proposed. All designs are implemented on a flexible FR4 substrate to make them suitable for wearable sensors and biomedical applications. The fabrication process involves the utilization of aerosol jet printing with nanoparticle silver ink, followed by curing in a vacuum chamber. Additionally, screen printing with copper paste is employed as another method, with subsequent curing in a laminator. The reflection coefficient (S11) and radiation patterns for the simulated design and fabricated samples were found to align closely. The achieved return loss consistently reaching -10 dB across fairly large operating frequency range underscores the efficacy of the proposed antennas and their associated additive manufacturing mechanisms. The design and simulation were performed using Ansys high frequency structural simulator (HFSS), and the parameters under test for the fabricated antennas were validated using a vector network analyzer (VNA) to assess overall performance.

Investigating a Cylindrical Dielectric Resonator Antenna Fabricated with Li3MgNbO5 Microwave Dielectric Ceramic

This work aims to fabricate a single-feed line Cylindrical Dielectric Resonator Antenna (CDRA) using low-temperature sintered Li3MgNbO5 microwave dielectric ceramic as a resonator, excited in HEM11δ mode. The ceramic synthesized using the conventional solid-state route resulted in a single-phase material exhibiting a cubic structure with an Fm-3m space group. The densely packed cylindrical disk of the ceramic was subsequently characterized for its microwave dielectric behaviour in TE01δ mode using the Hakki-Coleman method. The dielectric permittivity (ε r) measures 14.4, with a loss factor (tan δ) nearly equal to 4.01 × 10−4 and a temperature coefficient (τf) of −50.9 ppm °C−1. The antenna design was executed using the high-frequency structure simulator design software, utilizing the dielectric ceramic as the resonator, Cu strip as the feedline, and FR4 as the substrate. The maximum energy was coupled to the antenna when the resonator was placed at 11.75 mm on the substrate. The fabricated CDRA, using appropriate simulated parameters, resonated at 7.67 GHz, offering a return loss (S11) of −32.64 dB and an impedance bandwidth of 10.73%. Furthermore, the CDRA displayed a voltage standing wave ratio of 1.04, ensuring a nearby ideal impedance match and a bandwidth of 810 MHz to support high-speed data transmission.

Miniaturized IPD band pass filter with low insertion loss based on modified T‐section for 5G applications

AbstractA miniaturized bandpass filter (BPF) with low insertion loss based on a modified T‐section and a grounded transmission‐zero resonator is proposed. The novel T‐section consists of two resonators, which can achieve the bandpass performance with two transmission zeros (TZs) in the upper band. The grounded transmission‐zero resonator can generate an extra transmission zero in the lower band. Therefore, high frequency selectivity can be achieved by the above three transmission zeros near the passband. The proposed BPF can achieve an insertion loss of 0.8 dB and a return loss of 22 dB covering 3.3–4.2 GHz, and the upper‐stopband attenuation is better than 20 dB up to 12.5 GHz (3.3f0). The proposed BPF with a miniaturized size of 1.2 mm × 0.5 mm × 0.3 mm have been fabricated using Si‐based integrated passive devices (IPDs) technology and measured by on‐wafer probing. The simulated and measured results of the proposed BPF are in reasonably good agreement.

On fused filament fabrication of PLA nanofiber reinforced PCL matrix-based smart porous scaffolds

In the past, studies were reported on polycaprolactone (PCL) and polylactic acid (PLA) nanofibers (NF)-based scaffolds for tissue engineering applications. But hitherto, little has been reported on the sensing capability of PLA-NF reinforced PCL composite (PPNC)-based smart porous scaffolds for online health monitoring (OHM) of joint strains/ tendon tears/ contusions/ rhabdomyolysis, etc. In this study, smart porous scaffolds (SPS) were fabricated by fused filament fabrication (FFF) using PPNC for OHM (of joint strains/ tendon tears/ contusions/ rhabdomyolysis, etc.) with tuneable sensing and mechanical properties. The results suggest that FFF parameters, zigzag fill pattern, 0.20 mm layer thickness, and 80 % infill percentage are the best-predicted settings for maximum yield stress (σymax) of SPS. Further, a vector network analyzer was used to ascertain the sensing capability of SPS. The resonance frequency (Rf) for PCL (virgin) and PPNC with minimum yield stress (σymin) and σymax were observed as 2.3021, 2.6008, and 2.4315 GHz respectively. The simulated return loss (S11), specific absorption ratio (SAR), and Rf for PCL (−10.7593 dB, 0.977 W/kg, and 2.6450 GHz), PPNC with σymin (−10.5737 dB, 1.437 W/kg and 2.3400 GHz) and PPNC with σymax (−10.9429 dB, 1.155 W/kg and 2.5050 GHz) indicate that experimental data is in good co-relation with the observed values. The results are supported by a scanning electron microscope and differential scanning calorimetry.

Design and analysis of SRR based metamaterial loaded circular patch multiband antenna for satellite applications

Satellite communication has reached a turning point in transmitting data quickly and receiving signals clearly in faraway places. This paper presents a metamaterial-based antenna for distant and military applications that overcomes restrictions and performs unmatched. This project explores metamaterials to create a unique antenna. Expect to be astounded by its power to bend electromagnetic waves, miniaturize, and change our relationship with the universe. The feeding mechanism of this antenna is a modified co-planar waveguide. At 5.6 GHz, the proposed antenna unit cell measures 0.076λ0×0.2λ0, making it small thanks to its MTM characteristic. CP radiation is made when two orthogonally polarized modes are stimulated at the same time and two composite right- and left-handed transmission line unit cells are placed orthogonally. Reduced size, increased bandwidth, and improved Learn how this discovery opens new doors for high-resolution photography, broadband internet, and space exploration. One nanostructure that makes up a metamaterial is the Split Ring Resonator (SRR). SRR dimensions must be smaller than the resonance wavelength, making them crucial for near-infrared and optical responses. This effort examined nanoscale SRR characteristics in the infrared and visible ranges. SRRs composed of aluminum (Al) and gold (Au) were produced on silicon and silica substrates using electron beam lithography (EBL). The proposed structure consists of a microstrip-line-supplied SRR, a parasitic patch that is perpendicular to the ground plane, and two via holes connected by two split rings that feed the patch indirectly. Choosing the right material parameter for all such antennas depends on the planned structure. Fabrication and testing of the antenna matched simulations. Dimensions: 23.7 mm × 16.2 mm × 1.6 mm; substrate dielectric constant: 4.4. Experimental data are detailed and compared to analytical calculations. Simulation results show that metamaterials have negative permittivity and permeability in a certain frequency range, which can be predicted by an analytical method. Simulations indicated eight BRS, WiMAX, radar, and mobile phone resonance frequencies. Radiation is dipole-like in the omnidirectional in the H-plane and E-plane. 10 dB return loss and 3 dB axial ratio bandwidths are 38.6.7% and 8.1%, respectively.

UWB-MIMO 4-Port Fractal Antenna with Reduced Mutual Coupling

Abstract: UWB MIMO antenna loaded structure Mutual coupling between the four radiating elements is obtained to be less than - 25 db. The patterns of radiation are stable over the operating range and a peak gain of 4.5 dB is obtained at 7.5GHz and Return loss is obtained less than 10dB. Simulation is conducted using HFSS simulation tool and printed on a 30 X 30 X 1.6 mm3 FR4 material. 4 linear SRR structures are used between adjacent elements to ensure good isolation. MIMO antenna with grounded stubs and fractal geometry are used to improve isolation and to achieve wide band phenomena. UWB-MIMO antenna using to achieve better isolation. The UWB MIMO 4-port fractal antenna combines the characteristics of ultra-wideband operation, multiple input multiple output capability, four-port configuration for simultaneous data streams, and a fractal antenna design for wide bandwidth and compact size. This makes it suitable for high-speed, reliable communication in applications requiring UWB technology, such as high-speed data transfer, localization, and radar systems. By integrating a copper rectangular plane between ports, interference and crosstalk are minimized, enhancing the antenna's capability to handle multiple input and output signals efficiently. This innovative design approach not only improves isolation but also contributes to the antenna's overall effectiveness in various communication applications.

Bandwidth Enhancement of a D-Crescent-Shaped Monopole Patch Antenna for Wireless Applications

A low-profile monopole patch antenna is proposed for wireless communication purposes, covering PCS1900, UMTS, LTE2300, LTE2500, ISM, and WLAN bands. The antenna features a novel double-crescent-shaped (D-Crescent-Shaped) patch with a partial ground plane to enhance bandwidth. Resonating at 2.4 GHz for ISM applications, the antenna, constructed on FR-4 dielectric, exhibits a proportional bandwidth of 38%, covering 1.91 GHz to 2.81 GHz. The design achieves a low-profile configuration with dimensions of 36.88×44.85 mm², featuring a thickness of 1.6 mm. The proposed antenna has a return loss of -56.1 dB and a directivity gain of 2.21 dBi. The proposed antenna, with its low-profile design, ease of manufacturing, and improved bandwidth and return loss, is well-suited for wireless communication applications across widely-used frequency ranges like PCS, UMTS, LTE2300, LTE2500, ISM, Wi-Fi, Bluetooth, and 4G LTE.

Aluminium Scandium Nitride Thin Film BAW Resonators (FBAR) for 5G Applications

With the growing impact of 5G communication system, Radio-Frequency Micro-Electro-Mechanical-Systems (RF MEMS) technologies are becoming increasingly important in our daily lives. Development of filters in the 5G frequency range is being carried out tremendously. The rapid rise in smartphone usage, heightened data demands, congestion in the frequency spectrum, and advancements in technology have posed numerous challenges for the development of RF filters. The ultimate goal is to simplify the RF Front End Module used in smart phones, thereby achieving better selectivity. In this paper, a high frequency - high Q thin film bulk acoustic wave resonator of piezoelectric material Aluminium scandium nitride (AlScN)based FBAR is designed for 5G Application. Finite element analysis conducted using the COMSOL Multiphysics software assess the characteristics of the constructed FBAR. The outcomes indicate that the device resonates effectively at 5 GHz, exhibiting commendable return loss and a Q-factor of 1490. A high-resonance-frequency FBAR device offers advantages for 5G mobile technology.