Response Of Gear Transmission System Research Articles

Analysis of electromechanical coupling modal and dynamic response characteristics of permanent magnet gear transmission system considering variable load condition

In order to study the influence of electromagnetic (EM) effect and load change on the modal characteristics and dynamic response of gear transmission system driven by permanent magnet synchronous motor (PMSM), a electromechanical coupling dynamic model is established. The composite air gap permeability coefficient is introduced, and the formula of permanent magnet flux linkage under the influence of space harmonic and cogging effect is derived. The variation laws of gear meshing stiffness and bearing support stiffness under the influence of load change are simulated and analyzed. The natural frequency and vibration modal under different load, flux linkage and PI controller gain are revealed. On this basis, the influence of EM effect and load change on the resonance domain is analyzed through frequency sweep analysis and time domain simulation. Results indicate that the 1st order natural frequency and resonance amplitude will increase with the load, and the influence of PMSM EM excitation will gradually dominate. The increase of the flux linkage and speed loop controller gain Kpω will reduce the 1st order natural frequency. When Kpω =123, a new mode appears, and there is a modal transition between the new mode and mode 1 when Kpω =161. The research results can provide theoretical guidance for improving the transmission performance and structure optimization design of the permanent magnet gear transmission system.

Analysis of Time-Varying Mesh Stiffness and Dynamic Response of Gear Transmission System with Pitting and Cracking Coupling Faults

The gear transmission system is an important part of the mechanical system, so it is essential to judge its running state accurately. To solve the difficult problem of identifying the components of coupling faults, this paper derives the calculation method of gear time-varying mesh stiffness for coupling faults of pitting and cracking based on the energy method and considering the coupling between teeth, establishes the dynamics model of two-stage gear transmission system with coupling faults and studies the influence of coupling faults on gear time-varying mesh stiffness and dynamic characteristics. The accuracy of the proposed method is verified by experiments. The results show that both pitting and cracking can lead to a reduction in mesh stiffness. The stiffness of pitting will fluctuate irregularly due to the influence of pitting on the tooth surface, while the stiffness of cracked teeth is relatively smooth. The coupling fault stiffness is dominated by more serious faults. By analyzing the periodic impact components in time domain and the sideband components around the harmonics in frequency domain the faulty gears in the transmission system can be distinguished. It provides an effective reference for the diagnosis of faulty gears.

Dynamics research on gear transmission system of oscillating float wave energy generator

Aiming at the problem of dynamic characteristics and dynamic reliability of gear transmission system in point wave acquisition system, combined with the characteristics of randomness and instability of waves, the dynamic model of gear transmission system is established based on the simulation of actual wave excitation, and the dynamic response of gear transmission system is solved. Using rain flow counting method, the time history of gear contact stress is statistically analyzed, and the contact stress spectrum and probability distribution function of each gear pair are obtained. Based on the random process function of the stress-strength interference model, the Monte Carlo method is used to calculate and analyze the change law of the reliability of the gear transmission system over time. The results show that the reliability of the gear transmission system gradually decreases with the increase of time within 20 years, and finally the reliability is 0.8. Speed increasing gear has the greatest impact on the reliability of the transmission system.

Analysis of effect of random perturbation on dynamic response of gear transmission system

In order to investigate the effects of random perturbation of a low-frequency excitation caused by torque fluctuations, gear damping ratio, gear backlash, meshing frequency and meshing stiffness, the random dynamic model of a single pair of three-degree-of-freedom spur gear transmission system is established. With gear meshing frequency changing, the dynamic characteristics of the gear transmission system were analyzed by bifurcation diagram, phase diagram, time course diagram and Poincaré map of the system. The effects of random perturbation caused by a low-frequency excitation caused by torque fluctuations, gear damping ratio, gear backlash, meshing frequency and meshing stiffness were comparative analyzed. Numerical simulation shows that the gear transmission system with nonlinear clearance exists rich period-doubling bifurcation phenomenon. With the increasing of the gear meshing frequency, gear transmission system will be from the chaotic motion to periodic motion by inverse period-doubling bifurcation. The effect of the meshing frequency random perturbation on the gear transmission system movement is largest. On the contrary, the effect of the meshing stiffness random perturbation on the system is minimum.

Analysis on Vibration Response of Gear Transmission System

The inherent characteristics of the wind generators growth gearbox were solved, then the reasons which caused the gear transmission system generating dynamic incentive was analyzed, and also internal incentive and external incentive were given to 2MW wind generators gear transmission system quantitatively. On the basis of these, 2MW wind generators growth gearbox system’s vibration response caused under internal incentive and external incentive was solved and analyzed.