Respirable Quartz Dust Research Articles

Effects of occupational exposure to respirable quartz dust on acute myocardial infarction

ObjectivesThe aim of this study is to investigate the effects of occupational exposure to respirable quartz (RQ) on first acute myocardial infarction (AMI). RQ causes pulmonary diseases like silicosis and...

Coal mine dust lung disease in the modern era.

Coal workers' pneumoconiosis (CWP), as part of the spectrum of coal mine dust lung disease (CMDLD), is a preventable but incurable lung disease that can be complicated by respiratory failure and death. Recent increases in coal production from the financial incentive of economic growth lead to higher respirable coal and quartz dust levels, often associated with mechanization of longwall coal mining. In Australia, the observed increase in the number of new CWP diagnoses since the year 2000 has necessitated a review of recommended respirable dust exposure limits, where exposure limits and monitoring protocols should ideally be standardized. Evidence that considers the regulation of engineering dust controls in the mines is lacking even in high-income countries, despite this being the primary preventative measure. Also, it is a global public health priority for at-risk miners to be systemically screened to detect early changes of CWP and to include confirmed patients within a central registry; a task limited by financial constraints in less developed countries. Characteristic X-ray changes are usually categorized using the International Labour Office classification, although future evaluation by low-dose HRCT) chest scanning may allow for CWP detection and thus avoidance of further exposure, at an earlier stage. Preclinical animal and human organoid-based models are required to explore potential re-purposing of anti-fibrotic and related agents with potential efficacy. Epidemiological patterns and the assessment of molecular and genetic biomarkers may further enhance our capacity to identify susceptible individuals to the inhalation of coal dust in the modern era.

Threshold Value Estimation for Respirable Quartz Dust Exposure and Silicosis Incidence Among Workers in the German Porcelain Industry

Threshold Value Estimation for Respirable Quartz Dust Exposure and Silicosis Incidence Among Workers in the German Porcelain Industry

Threshold Value Estimation for Respirable Quartz Dust Exposure and Silicosis Incidence Among Workers in the German Porcelain Industry

Threshold Value Estimation for Respirable Quartz Dust Exposure and Silicosis Incidence Among Workers in the German Porcelain Industry

277 Threshold value estimation for respirable quartz dust exposure and silicosis incidence in the German porcelain worker cohort

ObjectivesTo estimate a threshold value tau for the respirable quartz dust concentration and silicosis incidence (1/1, ILO 1980/2000) in the German porcelain worker cohort (Birk et al 2009, 2010, Mundt...

Threshold Value Estimation for Respirable Quartz Dust Exposure and Silicosis Incidence Among Workers in the German Porcelain Industry

To estimate a threshold value for the respirable quartz dust concentration and silicosis incidence (1/1, ILO 1980/2000) in the German porcelain worker cohort. Forty incident cases occurred among 17,144 workers. Estimation of the relationship to cumulative respirable quartz dust exposures by using Cox regression with restricted cubic splines (7 knots or less) and fractional polynomials (degrees 5 or less). Threshold estimates were obtained by subtracting candidate values from the time-dependent concentration data (setting the result to zero if negative) and recalculating cumulative exposure. Best threshold estimate was 0.25 mg/m (95% confidence interval: 0.15 to 0.30 mg/m). A concentration threshold for silicosis risk is plausible. A threshold Cox model fitted the data significantly better than a nonthreshold model, summarized the cohort information without a loss in extracted information and more simply than restricted cubic splines and fractional polynomials.

Quartz Concentration Trends in Metal and Nonmetal Mining

From 1974 through 2010, the Mine Safety and Health Administration (MSHA) collected nearly 147,000 respirable dust samples with a mass of at least 0.1 mg and a minimum of 1% quartz. These samples represent about 50% of all respirable dust compliance samples collected by MSHA. Analysis of these data shows that pockets of high concentrations and overexposure continue to exist. At underground mines, from 2005 to 2010, occupations with >20% of the samples exceeding the permissible exposure limit (PEL) and geometric mean quartz concentrations exceeding the ACGIH threshold limit value of 25 μg/m3 included mucking, crusher operator, general laborer/utility, and front-end loader operator. During the same period, stone and rock saw operators and bagger and packers working at surface mines and mills also had >20% of the samples exceeding the PEL and geometric mean quartz concentrations >25 μg/m3. Regardless of mine type or location, slow but steady improvement in exposure levels is seen in jobs involving crushing operations, which are widespread in the mining industry. Crusher operators are more likely to work in an enclosed area where it is easier to apply dust controls and air conditioning. A downward trend is also observed for vehicle equipment operators who drive load-haul-dumps, front-end loaders, trucks, and similar equipment. Crusher operators and vehicle equipment operators represent occupational categories that are widely sampled by MSHA inspectors. A small but statistically significant reduction in the overall mean respirable quartz dust and quartz concentrations from 1993 to 2010 was observed in most commodity groups. Variability from year to year and between commodities is high. Reduction in respirable quartz dust concentration does not necessarily correspond to a reduction in quartz concentration within the same commodity group. These trends are consistent with those reported in previous studies.

Identifying sources of respirable quartz and silica dust in underground coal mines in southern West Virginia, western Virginia, and eastern Kentucky

Prior research has suggested that the source of respirable silica dust in underground coal mines is typically the immediate top or bottom lithology adjacent to the mined seam, not mineral matter bound within the mined coal bed. Geochemical analyses were applied in an effort to identify the specific source rock of respirable quartz dust in coal mines. The analyses also demonstrate the compositional changes that take place in the generation of the respirable dust fraction from parent rock material. All six mine sites were mining coal with relatively low mineral matter content, although two mines were operating in the Fire Clay coal bed which contains a persistent tonstein. Interpretations of Ca, Mg, Mn, Na, and K concentrations strongly suggest that the top strata above the mined seam is the primary source of mineral dust produced during mining. One site indicates a mixed or bottom source, possibly due to site specific conditions. Respirable dust compositional analyses suggest a direct relationship between the quantity of mineral Si and the quantity of quartz Si. A similar relationship was not found in either the top or bottom rocks adjacent to the mined seam. An apparent loss of elemental Al was noted in the respirable dust fraction when compared to potential parent rock sources. Elemental Al is present in top and bottom rock strata within illite, kaolinite, feldspar, and chlorite. A possible explanation for loss of Al in the respirable dust samples is the removal of clays and possibly chlorite minerals. It is expected that removal of this portion of the Al bearing mineral matter occurs during rock abrasion and dust transport prior to dust capture on the samplers.

Inhibition of the mitochondrial respiratory chain function abrogates quartz induced DNA damage in lung epithelial cells

Respirable quartz dust has been classified as a human carcinogen by the International Agency for Research on Cancer. The aim of our study was to investigate the mechanisms of DNA damage by DQ12 quartz in RLE-6TN rat lung epithelial type II cells (RLE). Transmission electron microscopy and flow-cytometry analysis showed a rapid particle uptake (30 min to 4 h) of quartz by the RLE cells, but particles were not found within the cell nuclei. This suggests that DNA strand breakage and induction of 8-hydroxydeoxyguanosine – as also observed in these cells during these treatment intervals – did not result from direct physical interactions between particles and DNA, or from short-lived particle surface-derived reactive oxygen species. DNA damage by quartz was significantly reduced in the presence of the mitochondrial inhibitors rotenone and antimycin-A. In the absence of quartz, these inhibitors did not affect DNA damage, but they reduced cellular oxygen consumption. No signs of apoptosis were observed by quartz. Flow-cytometry analysis indicated that the reduced DNA damage by rotenone was not due to a possible mitochondria-mediated reduction of particle uptake by the RLE cells. Further proof of concept for the role of mitochondria was shown by the failure of quartz to elicit DNA damage in mitochondria-depleted 143B (rho-0) osteosarcoma cells, at concentrations where it elicited DNA damage in the parental 143B cell line. In conclusion, our data show that respirable quartz particles can elicit oxidative DNA damage in vitro without entering the nuclei of type II cells, which are considered to be important target cells in quartz carcinogenesis. Furthermore, our observations indicate that such indirect DNA damage involves the mitochondrial electron transport chain function, by an as-yet-to-be elucidated mechanism

The crucial role of particle surface reactivity in respirable quartz-induced reactive oxygen/nitrogen species formation and APE/Ref-1 induction in rat lung

Persistent inflammation and associated excessive oxidative stress have been crucially implicated in quartz-induced pulmonary diseases, including fibrosis and cancer. We have investigated the significance of the particle surface reactivity of respirable quartz dust in relation to the in vivo generation of reactive oxygen and nitrogen species (ROS/RNS) and the associated induction of oxidative stress responses in the lung. Therefore, rats were intratracheally instilled with 2 mg quartz (DQ12) or quartz whose surface was modified by either polyvinylpyridine-N-oxide (PVNO) or aluminium lactate (AL). Seven days after instillation, the bronchoalveolar lavage fluid (BALF) was analysed for markers of inflammation (total/differential cell counts), levels of pulmonary oxidants (H2O2, nitrite), antioxidant status (trolox equivalent antioxidant capacity), as well as for markers of lung tissue damage, e.g. total protein, lactate dehydrogenase and alkaline phosphatase. Lung homogenates as well as sections were investigated regarding the induction of the oxidative DNA-lesion/oxidative stress marker 8-hydroxy-2'-deoxyguanosine (8-OHdG) using HPLC/ECD analysis and immunohistochemistry, respectively. Homogenates and sections were also investigated for the expression of the bifunctional apurinic/apyrimidinic endonuclease/redox factor-1 (APE/Ref-1) by Western blotting and immunohistochemistry. Significantly increased levels of H2O2 and nitrite were observed in rats treated with non-coated quartz, when compared to rats that were treated with either saline or the surface-modified quartz preparations. In the BALF, there was a strong correlation between the number of macrophages and ROS, as well as total cells and RNS. Although enhanced oxidant generation in non-coated DQ12-treated rats was paralleled with an increased total antioxidant capacity in the BALF, these animals also showed significantly enhanced lung tissue damage. Remarkably however, elevated ROS levels were not associated with an increase in 8-OHdG, whereas the lung tissue expression of APE/Ref-1 protein was clearly up-regulated. The present data provide further in vivo evidence for the crucial role of particle surface properties in quartz dust-induced ROS/RNS generation by recruited inflammatory phagocytes. Our results also demonstrate that quartz dust can fail to show steady-state enhanced oxidative DNA damage in the respiratory tract, in conditions were it elicits a marked and persistent inflammation with associated generation of ROS/RNS, and indicate that this may relate to compensatory induction of APE/Ref-1 mediated base excision repair.

Development of a dust collector inlet hood for enhanced surface mine drill dust capture

Surface mine drill operators have the highest frequency of overexposure to quartz dust, and drilling is one of the occupations associated with the highest incidence of silicosis. Previous field assessment studies of drilling machines indicate that they can emit some of the highest airborne respirable quartz dust concentrations found at surface mining operations. Typically, the surface mine drills are equipped with dry dust collector systems to capture the dust being flushed with compressed air from the hole during the drilling process. The overall control effectiveness of the dust collector system is initially dependent on capturing the dust cloud at the source via the collector inlet. To assist the initial capture of the dust being flushed from the drill hole, the bottom of the drill deck is typically shrouded or enclosed on all sides to help contain the dust for the collector inlet plenum located on the underside perimeter of the drill deck. Openings, gaps and breaches in the shroud enclosure permit dust to escape dust collector capture. 1 Mention of any company name or product does not constitute endorsement by the National Institute for Occupational Safety and Health. The National Institute for Occupational Safety and Health (NIOSH) has developed a collector inlet hood that reconfigures the inlet plenum around the drill steel and above the hole to enhance dust capture. Laboratory development and testing show that this inlet hood improves dust capture by an average of nearly 50% over a wide range of collector flows and shroud leakage areas. This report describes the laboratory and subsequent field testing of this inlet hood concept.

Variability in Quartz Exposure in the Construction Industry: Implications for Assessing Exposure-Response Relations

The aims of this study were to determine implications of inter- and intraindividual variation in exposure to respirable (quartz) dust and of heterogeneity in dust characteristics for epidemiologic research in construction workers. Full-shift personal measurements (n = 67) from 34 construction workers were collected. The between-worker and day-to-day variances of quartz and respirable dust exposure were estimated using mixed models. Heterogeneity in dust characteristics was evaluated by electron microscopic analysis and electron spin resonance. A grouping strategy based on job title resulted in a 2- and 3.5-fold reduction in expected attenuation of a hypothetical exposure-response relation for respirable dust and quartz exposure, respectively, compared to an individual based approach. Material worked on explained most of the between-worker variance in respirable dust and quartz exposure. However, for risk assessment in epidemiology, grouping workers based on the materials they work on is not practical. Microscopic characterization of dust samples showed large quantities of aluminum silicates and large quantities of smaller particles, resulting in a D50 between 1 and 2 μ m. For risk analysis, job title can be used to create exposure groups, although error is introduced by the heterogeneity of dust produced by different construction workers activities and by the nonuniformity of exposure groups. A grouping scheme based on materials worked on would be superior, for both exposure and risk assessment, but is not practical when assessing past exposure. In dust from construction sites, factors are present that are capable of influencing the toxicological potency.

Variability in Quartz Exposure in the Construction Industry: Implications for Assessing Exposure-Response Relations

The aims of this study were to determine implications of inter- and intraindividual variation in exposure to respirable (quartz) dust and of heterogeneity in dust characteristics for epidemiologic research in construction workers. Full-shift personal measurements (n = 67) from 34 construction workers were collected. The between-worker and day-to-day variances of quartz and respirable dust exposure were estimated using mixed models. Heterogeneity in dust characteristics was evaluated by electron microscopic analysis and electron spin resonance. A grouping strategy based on job title resulted in a 2- and 3.5-fold reduction in expected attenuation of a hypothetical exposure-response relation for respirable dust and quartz exposure, respectively, compared to an individual based approach. Material worked on explained most of the between-worker variance in respirable dust and quartz exposure. However, for risk assessment in epidemiology, grouping workers based on the materials they work on is not practical. Microscopic characterization of dust samples showed large quantities of aluminum silicates and large quantities of smaller particles, resulting in a D50 between 1 and 2 μ m. For risk analysis, job title can be used to create exposure groups, although error is introduced by the heterogeneity of dust produced by different construction workers activities and by the nonuniformity of exposure groups. A grouping scheme based on materials worked on would be superior, for both exposure and risk assessment, but is not practical when assessing past exposure. In dust from construction sites, factors are present that are capable of influencing the toxicological potency.

Hazardous emissions and health risk during laser cleaning of natural stones

The laser removal of unwanted surface layers on artworks and artifacts made from natural stones is connected with the emission of airborne dust and volatile components containing hazardous substances. The health risk depends on the hazardous substances, the threshold limit values, the emitted amount and the size of the emitted particles. Emission and workplace concentrations were determined during optimal cleaning of encrusted sandstone and limestone as well as painted sandstone with pulsed Nd:YAG lasers NL 102 and NL 201 manufactured by BMI. The emission rate increases with layer thickness from 0.1 to 3.5 mg s –1. The rate will rise considerably for lasers with higher average power. The operator works directly in front of the emission source and usually in a separated laser area. Hence workplace concentrations of inhalable dust can reach 50 mg m –3. The main hazardous substances concerning sandstone are respirable dust as a whole and respirable quartz dust. Concerning limestone, the main substances are totally respirable dust, inhalable calcium oxide dust, and sulfur dioxide, if gypsum is removed and dissociated. Further hazardous substances such as iron-, aluminum-, magnesium-, and phosphor oxide are, as far as the health risk is concerned, of minor relevance. Without protection, the concentrations would exceed the threshold values. The concentration can be reduced essentially by an exhaust system with a nozzle placed close to the source. In this way, the workplace concentration falls clearly below the threshold value for lead of only 0.1 mg m –3 during the removal of a white lead paint.

Respirable Concrete Dust--Silicosis Hazard in the Construction Industry

Concrete is an extremely important part of the infrastructure of modern life and must be replaced as it ages. Many of the methods of removing, repairing, or altering existing concrete structures have the potential for producing vast quantities of respirable dust. Since crystalline silica in the form of quartz is a major component of concrete, airborne respirable quartz dust may be produced during construction work involving the disturbance of concrete, thereby producing a silicosis hazard for exposed workers. Silicosis is a debilitating and sometimes fatal lung disease resulting from breathing microscopic particles of crystalline silica. Between 1992 and 1998, the National Institute for Occupational Safety and Health (NIOSH) made visits to construction projects where concrete was being mechanically disturbed in order to obtain data concerning respirable crystalline silica dust exposures. The construction activities studied included: abrasive blasting, concrete pavement sawing and drilling, and asphalt/concrete milling. Air samples of respirable dust were obtained using 10-mm nylon cyclone pre-separators, 37-mm polyvinyl chloride (PVC) filters, and constant-flow pumps calibrated at 1.7 L/min. In addition, high-volume respirable dust samples were obtained on 37-mm PVC filters using 1/2" metal cyclones (Sensidyne model 18) and constant-flow pumps calibrated at 9.0 L/min. Air sample analysis included total weight gain by gravimetric analysis according to NIOSH Analytical Method 600 and respirable crystalline silica (quartz and cristobalite) using x-ray diffraction, as per NIOSH Analytical Method 7500. For abrasive blasting of concrete structures, the respirable crystalline silica (quartz) concentration ranged up to 14.0 mg/m3 for a 96-minute sample resulting in an eight-hour time-weighted average (TWA) of 2.8 mg/m3. For drilling concrete highway pavement the respirable quartz concentrations ranged up to 4.4 mg/m3 for a 358-minute sample, resulting in an eight-hour TWA of 3.3 mg/m3. For concrete wall grinding during new building construction the respirable quartz measurements ranged up to 0.66 mg/m3 for a 191-minute sample, resulting in an eight-hour TWA of 0.26 mg/m3. The air sampling results for concrete sawing ranged up to 14.0 mg/m3 for a 350-minute sample resulting in an eight-hour TWA of 10.0 mg/m3. During the milling of asphalt from concrete highway pavement, the sampling indicated a respirable quartz concentration ranging up to 0.34 mg/m3 for a 504-minute sample, resulting in an eight-hour TWA of 0.36 mg/m3. The results of this work indicate the potential for respirable quartz concentrations involving disturbance of concrete to range up to 280 times the NIOSH Recommended Exposure Limit (REL) of 0.05 mg/m3 assuming exposure for an eight- to ten-hour workday. Considering the aging of the concrete infrastructure in the United States, these results pose a challenge to all who have an interest in preventing silica exposures and the associated disease silicosis.

Determinants of Exposure to Respirable Quartz Dust in the Construction Industry

Because most masonry building materials contain quartz and because these materials are subjected to a variety of treatments during the building process, quartz is encountered everywhere in building operations. The level of exposure to respirable quartz has been measured for some highly exposed groups of employees. At 30 construction sites personal air sampling (PAS) measurements of respirable dust and quartz have been performed and 171 samples have been taken. Both respirable dust and quartz levels were high. Respirable quartz exposures of more than ten times the Dutch limit value of 0.075 mg/m(3) TWA were common, but exposures up to 200 times the Dutch limit value were also found. The measurements were task oriented. By statistical analysis the contribution of the different determinants to the total exposure has been identified. With this approach, directions for an effective control measures programme can be given.

Determinants of exposure to respirable quartz dust in the construction industry

Because most masonry building materials contain quartz and because these materials are subjected to a variety of treatments during the building process, quartz is encountered everywhere in building operations. The level of exposure to respirable quartz has been measured for some highly exposed groups of employees. At 30 construction sites personal air sampling (PAS) measurements of respirable dust and quartz have been performed and 171 samples have been taken. Both respirable dust and quartz levels were high. Respirable quartz exposures of more than ten times the Dutch limit value of 0.075 mg/m3 TWA were common, but exposures up to 200 times the Dutch limit value were also found. The measurements were task oriented.By statistical analysis the contribution of the different determinants to the total exposure has been identified. With this approach, directions for an effective control measures programme can be given.

The Effects of Low Quartz Mass Loading and Spatial Variability on the Quartz Analysis of Surface Coal Mine Dust Samples

Monitoring the miner respirable quartz dust exposure for compliance with U.S. federal regulations is mandatory to protect the health of coal miners. However, there is no technique available for the direct measurement of the respirable quartz dust concentration in the mining environment. The only means to estimate the respirable quartz dust concentration is to perform an analysis of the respirable dust sample collected, which contains both coal and quartz dust as well as other mineral constituents. For samples collected at coal mines, the U.S. Mine Safety and Health Administration (MSHA) utilizes the P7 method for respirable quartz analysis. The objectives of this work are to 1) evaluate the performance of the P7 method on field samples of low quartz mass loadings, 2) evaluate the magnitude of dust mass spatial variability within an enclosed cab environment, and 3) estimate the subsequent propagation of error in calculating the percentage of quartz over a broad range of mass and quartz filter loadings at a...

The Effects of Low Quartz Mass Loading and Spatial Variability on the Quartz Analysis of Surface Coal Mine Dust Samples

Monitoring the miner respirable quartz dust exposure for compliance with U.S. federal regulations is mandatory to protect the health of coal miners. However, there is no technique available for the direct measurement of the respirable quartz dust concentration in the mining environment. The only means to estimate the respirable quartz dust concentration is to perform an analysis of the respirable dust sample collected, which contains both coal and quartz dust as well as other mineral constituents. For samples collected at coal mines, the U.S. Mine Safety and Health Administration (MSHA) utilizes the P7 method for respirable quartz analysis. The objectives of this work are to 1) evaluate the performance of the P7 method on field samples of low quartz mass loadings, 2) evaluate the magnitude of dust mass spatial variability within an enclosed cab environment, and 3) estimate the subsequent propagation of error in calculating the percentage of quartz over a broad range of mass and quartz filter loadings at a surface coal mine. These objectives were achieved by obtaining surface coal mine dust samples over a 9-month time period in enclosed cabs of three drills and three bulldozers. By measuring weighing precision and using reasonable estimates for sampler variability, the dust mass spatial variability component was calculated by difference. The results show that 1) the P7 method can be precise and linear with quartz mass loadings as low as approximately 5 µ mg of quartz, 2) the dust mass spatial variability, even within an enclosed cab environment, is the dominant factor of variability in propagation of error in estimating the quartz content of the obtained dust samples on a percentage basis, and 3) weighing precision is not a significant factor in error propagation. In addition to the enclosed cab samples, samples from eight surface coal mine drills were collected at various locations exterior to the drill cab. Significant data scatter at these outside locations strongly suggests that the ambient dust mass spatial variability has a significant effect on the propagation of error in estimating quartz content of the dust samples on a percentage basis.

Effects of Phospholipid Surfactant on Apoptosis Induction by Respirable Quartz and Kaolin in NR8383 Rat Pulmonary Macrophages

Apoptosis was measured in rat alveolar macrophage NR8383 cells challenged in vitro with respirable quartz or kaolin dust and with the dusts pretreated with dipalmitoyl phosphatidylcholine (DPPC) to model conditioning of respired dusts by interaction with a primary phospholipid component of pulmonary surfactant. Quartz dust is known to induce apoptosis in vitro and in vivo. For this study, quartz and kaolin were compared as dusts of similar cytotoxicity in some in vitro assays but of differing pathogenic potential: quartz can cause significant pulmonary fibrosis while kaolin generally does not. NR8383 cells exposed to native quartz at concentrations from 50 to 400 μg/ml for 6 h showed a dose-dependent increase in apoptosis measured by the TdT-mediated dUTP-fluorescein nick end labeling (TUNEL), cell death ELISA, and DNA ladder formation assays, while native kaolin induced significant response only at the higher concentrations and only in the TUNEL and ELISA assays. For cell challenge from 6 h to 5 days at 100 μg/ml of dust, quartz was active at all times while kaolin was active only at 5 days. DPPC pre-treatment suppressed quartz activity until 3 days and kaolin activity through 5 days. Cellular release of lactate dehydrogenase, measured in parallel experiments to compare dust apoptotic and necrotic activities, indicated that components of serum as well as surfactant may affect kaolin in vitro expression of those activities.