Resistance Of Concrete Research Articles

PROPERTIES OF MONOLITHIC CEMENT CONCRETE, HARDENING AT TEMPERATURES CLOSE TO ZERO

One of the main problems of hardening monolithic cement concrete, especially in the conditions of restoration and reconstruction of various objects, is the hardening of concrete in conditions of negative temperatures. Winter concreting technologies are divided into two main methods: the thermos method, in which the temperature of the environment in which the concrete hardens, must be above zero degrees Celsius, or the use of antifreeze additives. In the last case, it is advisable to introduce antifreeze chemical additives into the concrete composition, which lower the freezing temperature of water in concrete. However, previously conducted studies are known that show that even in the case of early freezing of concrete, its quality remains high. In this case, it is necessary that the beginning of setting of the cement paste occurs before the concrete can freeze. In addition, it has been suggested that concrete hardening at low temperatures can occur without using the thermos method. The article presents the results of the influence of hardening temperature on the setting time of cement paste. It is shown how hardening conditions affect on the strength and frost resistance of concrete.

Operational control of concrete frost resistance

The analysis of some methods for determining the frost resistance of concrete, including computational and experimental and accelerated ones, has been performed.It is noted that direct methods for determining the frost resistance of concrete are characterized by considerable labor intensity, as well as a long test time, which for concretes of high grades in frost resistance can be several months. Indirect methods do not always make it possible to determine the grade of concrete by frost resistance with a high degree of reliability. The paper proposes an accelerated method for determining the frost resistance of concrete, based on the principles of fracture mechanics, namely the relationship between the frost resistance of concrete and changes in the stress intensity coefficient after a single freeze to a temperature of -50оC. The proposed method allows for operational control of concrete produced monolithic and prefabricated structures. It is shown that the provisions of fracture mechanics describing the process of fatigue failure can be used to describe and analyze the mechanism of frost failure.This will make it possible to develop ways to control the process of frost destruction, slow it down and increase the frost resistance of concrete.

Evaluation of steel fibrous concrete impact resistance properties utilizing incinerated biomedical waste ash for a sustainable future construction

Evaluation of steel fibrous concrete impact resistance properties utilizing incinerated biomedical waste ash for a sustainable future construction

Experimental Research on Abrasion Resistance and Predictive Model of High-Density Rubberized Concrete with High Strength

Experimental Research on Abrasion Resistance and Predictive Model of High-Density Rubberized Concrete with High Strength

Rebar corrosion and bond in concrete with recycled glass granules

Waste glass granules are considered a cost-effective alternative material to replace aggregates in concrete. However, the bond degradation of corroded concrete containing recycled glass granules has not been explored. This study investigated the effect of glass granules on rebar corrosion and the bond loss between rebars and concrete subjected to accelerating corrosion. The compressive strength and pore structure of the concrete were first evaluated, and the corrosion rate and pull-out testing of rebar in concrete were conducted after corrosion. The results show that, despite reducing the initial bond strength before corrosion, a high replacement of recycled glass granules improved the concrete's resistance to corrosion due to the optimized microstructure of concrete. In addition, the compressive strength of the concrete dominated the initial bond strength, which reduced with increasing the corrosion period. However, this negative effect of corrosion was mitigated by increasing the recycled glass granules, followed by reduced bond strength loss and a lower rebar corrosion rate.

Effects of CaO-based expansive agent on carbonation resistance of marine concrete

Marine concrete contains a high volume of supplementary cementitious materials, which benefits low-carbon concrete production. However, they may also increase the risk of cracking and accelerate the carbonation due to the pozzolanic reaction. Theoretically, the CaO-based expansive agent (CEA) can inhibit shrinkage cracks and introduce external calcium sources that aid in the carbonation resistance of concrete. A comprehensive understanding of the impact of CEA on the carbonation resistance of marine concrete is currently scarce.In this study, marine concretes with varying dosages of CEA were exposed to 20% CO2 for 28 days. The carbonation depth, carbonation coefficient, air permeability, pore structure characteristics and CO2 buffer capacity of concrete were investigated. When the CEA dosage was less than 6%, the carbonation resistance and air permeability approached the reference groups in normal-strength concrete (NSC) and high-strength concrete (HSC). However, more than 6% CEA significantly decreased the carbonation resistance of concrete, particularly for HSC. For NSC, there was an excellent correlation between the carbonation coefficient and compressive strength, while for HSC, the carbonation coefficient correlated well with porosity. Also, CO2 buffer capacity was essential to assess the carbonation resistance of marine concrete.

Carbonization test and orthogonal polynomial regression analysis of steel fiber reclaimed concrete

To enhance the carbonation resistance of reclaimed concrete, several key factors affecting its performance were investigated. An orthogonal array L16(4³×2⁶) was employed to design the carbonation tests for steel fiber (SF) reinforced concrete. The study included varying SF volume ratios, along with considerations of different concrete ages (T) and water-cement ratios (W/R). The effect of SF volume ratio, regenerated crude aggregate (RCA) replacement rate, W/R, and T on the carbonation resistance of recycled concrete was analyzed. The test results indicated a trend of increasing carbonation depth over time. However, a lower W/R ratio resulted in a reduced carbonation depth. Notably, a 50% RCA replacement rate led to a shallower carbonation depth compared to other replacement rates. After 28 d, recycled concrete containing 1% SF exhibited a carbonation depth that was 6.9%, 1.5%, 1.5%, and 9.3% lower than concrete with 0%, 0.5%, 1.5%, and 2% SF, respectively. Therefore, the incorporation of 1% SF was found to be the most effective in improving carbonation resistance. Orthogonal polynomial regression analysis was employed to develop a regression equation relating carbonation depth to SF volume ratio, RCA replacement rate, W/R, and T. The regression coefficients were calculated and tested, leading to the identification of the optimal regression equation and its corresponding confidence interval.

Prediction of the Sulfate Attack Resistance of Concrete Based on Machine-Learning Algorithms

Prediction of the Sulfate Attack Resistance of Concrete Based on Machine-Learning Algorithms

A Study on a New Method for Simultaneous Internal Curing and hydrophobic in Concrete

The high hydrophilicity and permeability of concrete caused by many pores and hydroxyl groups produced by cement hydration are the main factors leading to dry shrinkage, cracking, and poor corrosion resistance of concrete. Giving concrete internal curing and hydrophobicity is an effective measure to solve the above problems. In this paper, a new idea and preparation method for an organic combination of hydrophilic and hydrophobic materials are proposed to improve the service life of concrete structures. Furthermore, the combined effects of hydrophilic and hydrophobic amphoteric materials (HAM) on the mechanical properties, internal curing properties, and hydrophobic properties of concrete were comprehensively investigated. In addition, the physical and chemical action mechanisms were analyzed in conjunction with microscopic tests. The results indicated that HAM rapidly released water within 3-7 days before concrete curing, and then slowly released water accompanied by the release of hydrophobic materials, gradually from hydrophilic to hydrophobic properties; The addition of HAM did not reduce the mechanical properties of concrete, which solved the problem of low compressive strength of integral hydrophobic concrete; The addition of HAM reduced the drying shrinkage of concrete by 154.12%, increased the contact angle to 96°, and decreased the water absorption rate by 36%, allowing the concrete to achieve better internal curing and a hydrophobic effect. The preparation of this material can open up a new way to solve the hydrophilic and hydrophobic properties required by concrete at the same time, and fill the gap that concrete can not balance hydrophilic and hydrophobic properties.

Research on humidity field and freezing resistance of green recycled ceramic internal cured concrete at early age

In cold and drought environment, concrete shrinkage cracking caused by water loss is serious, and thus the freezing resistance of concrete is deteriorated. The waste ceramic particles were used as internal curing materials to prepare concrete, based on this background. Then, the influence of internal curing with ceramic particles on humidity field and temperature of concrete is analyzed by using temperature and humidity sensor. Based on the change mechanism of the internal humidity of concrete, the relationship between the curvature radius of liquid surface and the relative humidity is revealed. Taking water loss and water loss rate as the index, the water transfer law of concrete surface under ceramic particle internal curing was defined. Through the drying shrinkage test, the mechanism of improving the drying shrinkage of concrete by internal curing in ceramic particles was mastered. Finally, the effects of ceramic internal curing on cement hydration, interfacial transition zone (ITZ) and freezing resistance of concrete were studied. The results show that the relative humidity, water loss and water loss rate of concrete increase with the increase of ceramic particle content, and the dry shrinkage value decreases with the increase of ceramic particle content. Compared with ordinary concrete, when the ceramic particle content is 10%, 15%, 20%, 25% and 30%, and the test period is 10 days, the internal relative humidity of concrete increases by 0.52%, 0.67%, 1.55%, 2.55% and 3.05%, respectively. The drying shrinkage values decreased by 3.42%, 7.69%, 10.26%, 15.17% and 30.13%, respectively. When the test period was 1032 hours, the water loss increased by 1.08%, 5.15%, 7.90%, 12.69% and 14.49%, respectively. Furthermore, when the ceramic particle content is 20%, the initial normalized heat flow of concrete increases by 2.74 mW/g, and the normalized heat flow minimum increases by 0.324 mW/g. The minimum ITZ microhardness increased by 2.64 MPa, the ITZ width decreased by 5 μm, and the maximum crack width at the contact between ITZ and aggregate decreased by 0.89 μm. At the same time, when the ceramic particle content is less than 20%, the effect of internal curing on the freezing resistance of concrete increases with an increase in ceramic particle content.

Frost resistance and improvement techniques of recycled concrete: a comprehensive review

In the pursuit of sustainable construction practices, the utilization of recycled concrete has emerged as a pivotal strategy, distinguished by its commitment to resource conservation and environmental stewardship. Nevertheless, the inherent micro-porosity and micro-cracking within the old mortar of recycled concrete may lead to weak bonding performance at the interfacial transition zone, culminating in diminished strength, reduced density, and elevated water absorption rates compared to conventional concrete, which critically impairs its performance in cold climates subjected to freeze-thaw cycles. Consequently, this paper provides a structured examination of the frost resistance properties of recycled concrete subjected to freeze-thaw cycling. Initially, the study delineates the mechanisms of frost-induced damage in recycled concrete by synthesizing the degradation pathways observed in both conventional and recycled concrete during freeze-thaw exposure. Subsequently, a detailed analysis is conducted to identify the pivotal factors affecting frost resistance, encompassing the proportion and moisture affinity of recycled aggregates, the addition of silica fume and fly ash, the water-to-cement ratio, and the degree of water saturation. In the final segment, the study compiles and reviews the strategies for bolstering the frost resistance of recycled concrete, including the incorporation of air-entraining admixtures, fiber reinforcement, and aggregate modification approaches. The objective of this research is to offer a thorough comprehension of recycled concrete, with a concentration on the mechanisms of frost damage, the critical determinants of frost resistance, and interventions to augment its resilience against freezing conditions. On this basis, the present paper, in conjunction with the characteristics and current research status of recycled concrete, proposes recommendations for the application of recycled concrete in cold regions. This review is anticipated to facilitate researchers in gaining a comprehensive understanding of the freeze-thaw characteristics of recycled concrete and the measures to enhance its frost resistance. Furthermore, it aims to assist engineering and technical personnel in selecting appropriate treatment methods to improve the frost resistance of recycled concrete in cold regions, thereby promoting the practical engineering application of recycled concrete in such areas.

Probing the dual mechanism of load damage and flowing solution on sulfate attack resistance of alkali-activated slag concrete

Alkali-activated slag concrete (AASC) is a representative low-carbon green building material. To effectively characterize the sulfate attack resistance of AASC in complex environments, a self-designed simulation device for complex corrosion environments was used to study the sulfate attack mechanism and property deterioration law of AASC under the loads and flowing corrosion solutions. The results indicated that both load-induced damage and dissolution accelerated the transport of sulfate ions into the AASC. On the one hand, the load-induced damage and dissolution resulted in a decrease in the proportion of gel pores, reducing the electrostatic interaction between ions and the gel pore wall as well as the gel pore wall thinning effect. On the other hand, the load-induced damage and dissolution decreased the pH of the pore solutions in AASC, causing easier decalcification or dealumination of C-A-S-H gel under sulfate ion attack. This further accelerated the sulfate ion attack and deterioration of AASC.

Effect of temperature rise caused by fire on the physical and mechanical properties of concrete

In the past few years, several concrete constructions have suffered major fires, causing very significant damage to the structure. The fire resistance of concrete depends on some of its characteristics such as the nature of the components used for its formulation, permeability, water content and mechanical resistance. In the places most exposed to fire, all the coating can be expelled, which seriously threatens the bearing capacity of the construction. In addition, the financial loss due to repair over a long period can reach several million Euros. This paper presents the physical and chemical transformations caused by the increase in the temperature of concrete in the event of a fire. These transformations mainly have an effect on the microstructure, the mechanical properties and the thermal deformation of concrete. The two phenomena of flaking and spalling of concrete were also studied in order to know their origins and found the methods of preventive. Indeed, flaking can manifest itself explosively, and have significant consequences on the resistance of concrete. It thus reduces the cross-section of the structure and also decreases its bearing capacity, which leads to an increase in the risk of structural failure. The factors influencing the flaking phenomenon were also presented.

Study on the influence parameters and anti‐abrasion performance of steam‐cured hydraulic concrete for prefabricated water conveyance channel

AbstractExcessive sediment concentration in water can cause damage to prefabricated concrete channels. This study evaluates the impact of sediment‐laden water flow on the mass loss of concrete after abrasion, incorporating scanning electron microscope‐energy dispersive spectrometer (SEM‐EDS) and X‐ray diffraction (XRD) analyses to assess the effects of four steam‐curing parameters—delay time, heating rate, constant temperature duration, and steam curing temperature—on the abrasion resistance of concrete used in enterprise prefabricated water conveyance channels. The results indicate that the abrasion resistance of concrete for prefabricated channels improves gradually with increases in delay time and constant temperature duration. When the delay time exceeds 3 h and the constant temperature time exceeds 4 h, the concrete's abrasion resistance can reach more than 5 h(g/cm2)−1. Rapid heating rates and excessively high steam curing temperatures adversely affect the concrete's abrasion resistance. However, when the heating rate is controlled within 20°C/h and the steam curing temperature does not exceed 70°C, the concrete's abrasion resistance can achieve more than 5 h(g/cm2)−1. In compliance with the standard DL/T5201‐2021 requirements, it is recommended that concrete with high demands for abrasion resistance should preferentially select steam‐curing parameters within these ranges.

Three-dimensional mesoscopic investigation on the dynamic compressive behavior of coral sand concrete with reinforced granite coarse aggregate (GCA)

In the construction of island and reef engineering, coral concrete shows a good application prospect due to its abundant raw materials. However, the porous and fragile mechanical characteristics of coral reefs limit their use as coarse aggregate in the preparation of coral concrete materials. This study utilized hard and dense granite as the coarse aggregate and regarded coral sand concrete as a two-phase composite material consisting of spherical granite coarse aggregate (GCA) and coral mortar. It investigated the enhancement effect of granite on coral concrete from a microscopic perspective. Five 3D mesoscopic models with different GCA contents and randomly distributed aggregates were established to reveal the variation patterns and failure mechanisms of coral sand concrete under impact loading with GCA. The findings demonstrate that the K&C model can effectively simulate the dynamic compression behavior of coral mortar and granite materials. Under the action of a half-sine incident wave, the dynamic compressive strength of the samples increases with the increase in GCA, demonstrating that the addition of GCA can effectively enhance the impact resistance of coral sand concrete. As the content of GCA increases, the sensitivity of the samples to the loading wave amplitude also increases accordingly.

Investigating the early age crack resistance of concrete treated with silane-modified zeolite powder

This study investigates the efficacy of silane-modified zeolite powder in enhancing the early age crack resistance of concrete. Three concrete mixes were evaluated: a reference mix, a 20 % zeolite replacement mix, and a silane-modified zeolite mix. The silane-zeolite mix demonstrated significant improvements, extending the time to crack by 70 % compared to the reference mix (from 11.2 to 19.1 hours). Mechanical strength tests revealed a 58 % increase in first-crack strength for the silane-zeolite mix over the reference mix. Water absorption tests showed that the silane-zeolite mix absorbed 42 % less water than the reference mix, indicating a denser microstructure. Microscopic analyses confirmed these findings, revealing a more refined pore structure with reduced microcrack frequency and width in the silane-zeolite mix. These results highlight the potential of silane-modified zeolite in improving concrete durability and longevity.

Effect of coarse aggregates on contact explosion resistance of concrete—A mesoscopic investigation

The intricate relationship between the mechanical properties of concrete and its internal microstructure underscores the importance of comprehending explosion performance and damage mechanisms at a mesoscopic level to effectively enhance blast resistance. This study employed three-dimensional (3D) mesoscale models to numerically investigate the dynamic behavior of concrete mixed with coarse aggregates under contact explosion. Rigorous validation of numerical models and simulation techniques was untaken through the contact explosion tests. The study explored mesoscopic damage mechanisms in heterogeneous concrete targets with randomly distributed coarse aggregates, drawing comparisons with a homogeneous concrete target. Critical mesoscopic parameters influencing the contact explosion resistance of concrete were thoroughly examined. Structural effects of coarse aggregates emerge as pivotal, shifting the damage mode from overall failure with spalling-dominated damage in homogeneous concrete to localized failure in mesoscopic concrete. The mesoscopic concrete experienced a distinct four-stage damage evolution—cratering, crack initiation, perforation, and dynamic fragmentation—diverging from homogeneous concrete with multi-layer spalling originating from the boundaries. The exponential attenuation of shock waves observed in homogeneous concrete was locally disrupted by coarse aggregates in mesoscopic concrete, attributed to wave impedance mismatch and aggregate extrusion effects. Mortar strength primarily contributed to concrete cracking, with minimal impact on damage modes. Failure modes were predominantly influenced by the content and particle size of coarse aggregates. Higher volumetric fractions significantly reduced concrete spalling, while increased coarse aggregate size exacerbated perforation failure. This comprehensive study advances our understanding of blast-resistant concrete design at a mesoscopic level, providing valuable insights for strategies aimed at enhancing structural resilience.

Influence of chemical admixtures on buildability and deformation of concrete for additive manufacturing

In this study, the buildability of three-dimensionally (3D) printed (3DP) concrete that uses coarse aggregate was evaluated in the fresh state according to the contents of three chemical admixtures (high-range water-reducing agent (HRWRA), viscosity-modifying agent (VMA), and setting-time modifying agent), and the correlation between fluidity changes and buildability was analyzed. Polycarboxylate HRWRA and VMA contents were varied to control the flowability and static yield stress, which affect the workability. In addition, the SMA content was varied, and slump tests and table flow tests were performed at 30-minute intervals up to 6.5 h after mixing to measure flowability. Simultaneously, static yield stress was measured to analyze rheological changes, and penetration resistance and green strength tests were performed to analyze the main factors influencing buildability over time. The highest buildability was observed when the VMA content was 1.5 %. The static yield stress of fresh concrete could be ≤3000 Pa to guarantee adequate 3DP concrete transport performance while that at 1 h after mixing could be ≥2000 Pa to secure buildability. When the penetration resistance of fresh concrete is ≥80 kPa, the deflection of concrete may be <10 %. Through this, buildability can be approximately judged based on penetration resistance.

A Review on Research Progress of Corrosion Resistance of Alkali-Activated Slag Cement Concrete.

China is the largest producer and user of Ordinary Silicate Cement (OPC), and rapid infrastructure development requires more sustainable building materials for concrete structures. Portland cement emits large amounts of CO2 in production. Given proposals for "carbon peaking and carbon neutralization", it is extremely important to study alternative low-carbon cementitious materials to reduce emissions. Alkali-activated slag (AAS) cement, a new green cementitious material, has high application potential. The chemical corrosion resistance of AAS concrete is important for ensuring durability and prolonging service life. This paper reviews the hydration mechanism of AAS concrete and discusses the composition of hydration products on this basis, examines the corrosion mechanism of AAS concrete in acid, sulfate, and seawater environments, and reviews the impact of its performance due to the corrosion of AAS concrete in different solutions. Further in-depth understanding of its impact on the performance of concrete can provide an important theoretical basis for its use in different environments and provides an important theoretical basis for the application of AAS concrete, so that we can have a certain understanding of the durability of AAS concrete.

Concrete's fire resistance improvement with waste glass and ceramic aggregates

AbstractEven though concrete structures are safer than steel structures in terms of fire resistance, the risk exists in concrete structures by spalling or exploding, especially in high-strength concrete. This study aims to produce a particular type of concrete using waste ceramics as fine aggregate and waste glass as coarse aggregate and compare data with normal aggregate concrete. Studies show that using waste ceramic and glass increases the fire resistance of concrete. After fire exposure in the control mix, the residual compressive strength was 10 MPa. The waste aggregate concrete was found to be 26.9 MPa after 800 centigrade exposures, which was an excellent result. Waste materials decreased construction costs and led to a clean environment.