Resin-bound Peptide Research Articles

Squaric esters as peptide stapling reagents

We report that squaric esters can serve as bifunctional reagents for selective peptide stapling reactions. Formation of the squaric amide staple occurs under mild conditions with amine-containing side chains. We show that short resin-bound peptides are readily stapled on solid phase and that stapling can occur at various relative positions along the peptide and with various amine tether lengths (e.g. Lysine, ornithine, etc). The squaric amide staples are stable to strong acid conditions used to cleave the stapled peptide from the resin and the stapled peptides show an increase in helicity as analyzed through circular dichroism.

Characterization of Peptide Antibodies by Epitope Mapping Using Resin-Bound and Soluble Peptides.

Characterization of peptide antibodies through identification of their target epitopes is of utmost importance, as information about epitopes provide important knowledge, among others, for discovery and development of new therapeutics, vaccines, and diagnostics.This chapter describes a strategy for mapping of continuous peptide antibody epitopes using resin-bound and soluble peptides. The approach combines three different types of peptide sets for full characterization of peptide antibodies; (i) overlapping peptides, used to locate antigenic regions; (ii) truncated peptides, used to identify the minimal peptide length required for antibody binding; and (iii) substituted peptides, used to identify the key residues important for antibody binding and to determine the specific contribution of key residues. For initial screening, resin-bound peptides are used for epitope estimation, while soluble peptides subsequently are used for final epitope characterization and identification of critical hot spot residues. The combination of resin-bound peptides and soluble peptides for epitope mapping provides a time-saving and straightforward approach for characterization of antibodies recognizing continuous epitopes, which applies to peptide antibodies and occasionally antibodies directed to larger proteins as well.

Direct Construction of Corrole-Peptide Conjugates by Controllable Bilane Formation on Resin.

Corroles have attracted increasing research interests in recent decades owing to their unique properties over porphyrins. However, the relatively inefficient and tedious synthetic procedures of corrole building blocks with functional groups for bioconjugation hindered their bioapplications. Herein, we report a highly efficient protocol to synthesize corrole-peptide conjugates with good yields (up to 63 %) without using prepared corrole building blocks. By condensing two -COOH-bearing-dipyrromethane molecules onto an aldehyde group on resin-bound peptide chains in a controllable manner, a series of desired products with long (up to 25 residues) and bioactive peptide chains were obtained with at most one chromatographic purification. The synthesized compounds exhibited potential applications as chelators for metal ions for biomedical applications, as building blocks for supramolecular materials, as well as targeted fluorescent probes.

Targeting Melanocortin Receptors Using SNAr-Type Macrocyclization: A Doubly Orthogonal Route to Cyclic Peptide Conjugates.

While a range of strategies exist to accomplish peptide macrocyclization, they are frequently limited by the need for orthogonal protection or provide little opportunity for structural diversification. We have evaluated an efficient macrocyclization method that employs nucleophilic aromatic substitution (SNAr) to create thioether macrocycles. This versatile macrocyclization, orthogonal to conventional peptide synthesis, can be performed in solution on unprotected peptidomimetics or on resin-bound peptides with side-chain protection in place. We show that the electron-withdrawing groups present in the products can be further utilized in subsequent orthogonal reactions to alter the peptide properties or to add prosthetic groups. The macrocyclization strategy was applied to the design of melanocortin ligands, generating a library of potent melanocortin agonists that exhibit distinct subtype selectivity.

Streamlined Chemoenzymatic Synthesis of Cyclic Peptides by Non-ribosomal Peptide Cyclases.

Macrocyclization improves the pharmaceutical properties of peptides; however, regio- and chemoselective intramolecular cyclizations remain challenging. Here we developed a streamlined chemoenzymatic approach to synthesize cyclic peptides by exploiting non-ribosomal peptide (NRP) cyclases. Linear peptides linked to the resin through a C-terminal diol ester functionality are synthesized on a solid support, to circumvent the installation of leaving groups to the peptidic substrates in the liquid phase which often triggers undesirable epimerization. Cleavage of the resin-bound peptides yielded the diol esters with sufficient purity to be readily cyclized in a head-to-tail manner by SurE, a representative penicillin-binding protein-type thioesterase (PBP-type TE). Explorations of homologous wild-type enzymes as well as rational protein engineering have broadened the scope of the enzymatic macrolactamization. This method will potentially accelerate the exploitation of NRP cyclases as biocatalysts.

Functionalized Tetrazoles as Latent Active Esters in the Synthesis of Amide Bonds.

We report the use of N-2,4-dinitrophenyltetrazoles as latent active esters (LAEs) in the synthesis of amide bonds. Activating the tetrazole generates an HOBt-type active ester without the requirement for exogenous coupling agents. The methodology was widely applicable to a range of substrates, with up to quantitative yields obtained. The versatility and functional group tolerance were exemplified with the one-step synthesis of various pharmaceutical agents and the N-acylation of resin-bound peptides.

Determination of crucial epitopes in the sperm protein calsperin employing synthetic peptides and monoclonal antibodies.

The chaperone protein calsperin is exclusively expressed in the testes and is essential for sperm migration from the uterus into the oviduct. During spermatogenesis, calsperin interacts with ADAM3, a spermatozoon membrane protein required for fertilization. In this study, we characterized a calsperin epitope by using two monoclonal antibodies and resin-bound calsperin peptides, which were tested for reactivity using a modified enzyme-linked immunosorbent assay. An epitope located at the C-terminal end of calsperin corresponding to amino acids 228 WEKHFLDAS237 was identified. Three hot spot amino acids were essential for antibody binding whereas the remaining amino acids in the identified epitope appeared to be essential for bringing the critical contact residues into an α-helix structure. No notable sequence similarity was determined between the identified calsperin epitope and calreticulin, a chaperone homologue with sequence similarity, indicating that the identified epitope was specific for calsperin. Characterization of the calsperin epitope and of the two antibodies tested may be used in assays for further characterization of calsperin, where knowledge about the binding sites is necessary, for example, in sandwich assays. Moreover, studies like these may be used to study the function of calsperin during spermatogenesis and fertilization in detail and to develop new male contraception methods by targeting calsperin and mediating neutralization of its function.

5-Amino-3-methyl-Isoxazole-4-carboxylic Acid as a Novel Unnatural Amino Acid in the Solid Phase Synthesis of α/β-Mixed Peptides.

The hybrid peptides consisting of α and β-amino acids show great promise as peptidomimetics that can be used as therapeutic agents. Therefore, the development of new unnatural amino acids and the methods of their incorporation into the peptide chain is an important task. Here, we described our investigation of the possibility of 5-amino-3-methyl-isoxazole-4-carboxylic acid (AMIA) application in the solid phase peptide synthesis. This new unnatural β-amino acid, presenting various biological activities, was successfully coupled to a resin-bound peptide using different reaction conditions, including classical and ultrasonic agitated solid-phase synthesis. All the synthesized compounds were characterized by tandem mass spectrometry. The obtained results present the possibility of the application of this β-amino acid in the synthesis of a new class of bioactive peptides.

Versatile Synthesis of Multivalent Porphyrin-Peptide Conjugates by Direct Porphyrin Construction on Resin.

Multifunctional porphyrin–peptide conjugates with different propensities for self‐assembly into various supramolecular nanoarchitectures play important roles in advanced materials and biomedical research. However, preparing prefunctionalized core porphyrins by traditional low‐yielding statistical synthesis and purifying them after peptide ligation through many rounds of HPLC purification is tedious and unsustainable. Herein, we report a novel integrated solid‐phase synthetic protocol for the construction of porphyrin moieties from simple aldehydes and dipyrromethanes on resin‐bound peptides directly to form mono‐, cis/trans‐di‐, and trivalent porphyrin–peptide conjugates in a highly efficient and controllable manner; moreover, only single final‐stage HPLC purification of the products is needed. This efficient strategy enables the rapid, greener, and substrate‐controlled diversity‐oriented synthesis of multivalent porphyrin–(long) peptide conjugate libraries for multifarious biological and materials applications.

Production and Characterization of Peptide Antibodies to the C-Terminal of Frameshifted Calreticulin Associated with Myeloproliferative Diseases.

Myeloproliferative Neoplasms (MPNs) constitute a group of rare blood cancers that are characterized by mutations in bone marrow stem cells leading to the overproduction of erythrocytes, leukocytes, and thrombocytes. Mutations in calreticulin (CRT) genes may initiate MPNs, causing a novel variable polybasic stretch terminating in a common C-terminal sequence in the frameshifted CRT (CRTfs) proteins. Peptide antibodies to the mutated C-terminal are important reagents for research in the molecular mechanisms of MPNs and for the development of new diagnostic assays and therapies. In this study, eight peptide antibodies targeting the C-terminal of CRTfs were produced and characterised by modified enzyme-linked immunosorbent assays using resin-bound peptides. The antibodies reacted to two epitopes: CREACLQGWTE for SSI-HYB 385-01, 385-02, 385-03, 385-04, 385-07, 385-08, and 385-09 and CLQGWT for SSI-HYB 385-06. For the majority of antibodies, the residues Cys1, Trp9, and Glu11 were essential for reactivity. SSI-HYB 385-06, with the highest affinity, recognised recombinant CRTfs produced in yeast and the MARIMO cell line expressing CRTfs when examined in Western immunoblotting. Moreover, SSI-HYB 385-06 occasionally reacted to CRTfs from MPN patients when analysed by flow cytometry. The characterized antibodies may be used to understand the role of CRTfs in the pathogenesis of MPNs and to design and develop new diagnostic assays and therapeutic targets.

Merging Late-Stage Diversification with Solid-Phase Peptide Synthesis Enabled by High-Throughput On-Resin Reaction Screening

An integrated workflow is described that combines micromole-scale high-throughput experimentation (HTE) reaction screening and solid-phase peptide synthesis (SPPS) to enable rapid synthetic method development for on-resin peptide diversification. Using this new approach, we have identified several sets of robust Suzuki–Miyaura coupling conditions with complementary scope that collectively display broad coverage with respect to both resin-bound peptide substrates containing aryl halide side chains and (hetero)arylboronic acid coupling partners. We have also demonstrated the utility of this integrated SPPS/chemical diversification method by synthesizing a multidimensional library of diverse peptides in high yields.

Evaluation of 1H-Triazole-1-[N,N′-Bis(tert-butoxycarbonyl)]carboxamidine in Solution-Phase and On-Resin Guanidinylation

Several guanidines and guanidinylated peptides have substantial potential as therapeutics, but efficient guanidinylation reagents are vital for easy access to these compounds. Presently, pyrazole-1-carboxamidine type reagents are commonly used in the transformations of amines into corresponding guanidines. Here, we report a comparative study of the utility of 1H-triazole-1-[N,N'-bis(tert-butoxycarbonyl)]carboxamidine, which was synthesized in two steps and readily upscaled to gram amounts. It exhibited excellent performance in solution-phase reactions, rapidly converting a set of representative aliphatic primary and unhindered secondary amines as well as aniline into the corresponding bis(tert-butoxycarbonyl)-protected guanidines. To enable a direct assessment of the reactivity of guanidinylation reagents, conversions were performed in deuterated solvents (d7-DMF or d8-THF), allowing for continuous analysis of the reaction mixtures by 1H and 13C NMR. Likewise, 1H-triazole-1-[N,N'-bis(tert-butoxycarbonyl)]carboxamidine proved to be a versatile reagent in solid-phase conversions, for example, a resin-bound test peptide (KFFKFFK) was fully guanidinylated in only 2 h by using 2 equivalents of the reagent per free amino group. Also, 1H-triazole-1-[N,N'-bis(tert-butoxycarbonyl)]carboxamidine proved capable of completely guanidinylating more sterically hindered N-terminal residues (e.g., N-methyl amino acids or a peptoid) in resin-bound peptides. Its superior reactivity and stability demonstrated under heating conditions make 1H-triazole-1-[N,N'-bis(tert-butoxycarbonyl)]carboxamidine a valuable guanidinylation reagent both in solution- and solid-phase synthesis.

Perfluoro-tert-butanol for selective on-resin detritylation: a mild alternative to traditionally used methods.

Solid-phase synthesis of cyclic, branched or side-chain-modified peptides typically involves introduction of a residue carrying a temporary side-chain protecting group that undergoes selective on-resin removal. In particular, Nα-Fmoc-Nε-(4-methyltriphenylmethyl) (Mtt)-protected lysine and its shorter analogues are commercially available and extensively used in this context. Nevertheless, rapid reliable methods for on-resin removal of Mtt groups in the presence of tert-butyloxycarbonyl (Boc) groups are needed. Current commonly used conditions involve low concentrations (1-3%) of trifluoroacetic acid (TFA) in dichloromethane, albeit adjustment to each specific application is required to avoid premature removal of Boc groups or cleavage from the linker. Hence, a head-to-head comparison of several deprotection conditions was performed. The selected acids represent a wide range of acidity from TFA to trifluoroethanol. Also, on-resin removal of the N-(4-methoxytriphenylmethyl) (Mmt) and O-trityl groups (on serine) was investigated under similar conditions. The mildest conditions identified for Mtt deprotection involve successive treatments with 30% hexafluoroisopropanol (HFIP) or 30% perfluoro-tert-butanol [(CF3)3COH] in dichloromethane (3 × 5 or 3 × 15min, respectively), while 30% HFIP, 30% (CF3)3COH, or 10% AcOH-20% trifluoroethanol (TFE) in CH2Cl2 (3 × 5min) as well as 5% trichloroacetic acid in CH2Cl2 (3 × 2min) enabled Mmt removal. Treatment with 1% TFA with/without 2% triisopropylsilane added (3 × 5min), but also prolonged treatment with 30% (CF3)3COH (5 × 15min), led to selective deprotection of an O-Trt group on a serine residue. In all cases, the sequences also contained N-Boc or O-tBu protecting groups, which were not affected by 30% HFIP or 30% (CF3)3COH even after a prolonged reaction time of 4h. Finally, the optimized conditions involving HFIP or (CF3)3COH proved applicable also for selective deprotection of a longer resin-bound peptide [i.e., Ac-Gly-Leu-Leu-Lys(Mtt)-Arg(Pbf)-Ile-Lys(Boc)-Ser(tBu)-Leu-Leu-RAM-PS] as well as allowed for an almost complete deprotection of a Dab(Mtt) residue.

Epitope Mapping of Monoclonal Antibodies to Calreticulin Reveals That Charged Amino Acids Are Essential for Antibody Binding.

Calreticulin is a chaperone protein, which is associated with myeloproliferative diseases. In this study, we used resin-bound peptides to characterize two monoclonal antibodies (mAbs) directed to calreticulin, mAb FMC 75 and mAb 16, which both have significantly contributed to understanding the biological function of calreticulin. The antigenicity of the resin-bound peptides was determined by modified enzyme-linked immunosorbent assay. Specific binding was determined to an 8-mer epitope located in the N-terminal (amino acids 34–41) and to a 12-mer peptide located in the C-terminal (amino acids 362–373). Using truncated peptides, the epitopes were identified as TSRWIESK and DEEQRLKEEED for mAb FMC 75 and mAb 16, respectively, where, especially the charged amino acids, were found to have a central role for a stable binding. Further studies indicated that the epitope of mAb FMC 75 is assessable in the oligomeric structure of calreticulin, making this epitope a potential therapeutic target.

Solid-phase synthesis of d-fructose-derived Heyns peptides utilizing N\u03b1-Fmoc-Lysin[N\u03b5-(2-deoxy-d-glucos-2-yl),N\u03b5-Boc]-OH as building block

Aldoses and ketoses can glycate proteins yielding isomeric Amadori and Heyns products, respectively. Evidently, d-fructose is more involved in glycoxidation than d-glucose favoring the formation of advanced glycation endproducts (AGEs). While Amadori products and glucation have been studied extensively, the in vivo effects of fructation are largely unknown. The characterization of isomeric Amadori and Heyns peptides requires sufficient quantities of pure peptides. Thus, the glycated building block Nα-Fmoc-Lys[Nε-(2-deoxy-d-glucos-2-yl),Nε-Boc]-OH (Fmoc-Lys(Glc,Boc)-OH), which was synthesized in two steps starting from unprotected d-fructose and Fmoc-l-lysine hydrochloride, was site-specifically incorporated during solid-phase peptide synthesis. The building block allowed the synthesis of a peptide identified in tryptic digests of human serum albumin containing the reported glycation site at Lys233. The structure of the glycated amino acid derivatives and the peptide was confirmed by mass spectrometry and NMR spectroscopy. Importantly, the unprotected sugar moiety showed neither notable epimerization nor undesired side reactions during peptide elongation, allowing the incorporation of epimerically pure glucosyllysine. Upon acidic treatment, the building block as well as the resin-bound peptide formed one major byproduct due to incomplete Boc-deprotection, which was well separated by reversed-phase chromatography. Expectedly, the tandem mass spectra of the fructated amino acid and peptide were dominated by signals indicating neutral losses of 18, 36, 54, 84 and 96 m/z-units generating pyrylium and furylium ions.

Solid phase submonomer azapeptide synthesis.

Azapeptides contain at least one aza-amino acid, where the α-carbon has been replaced by a nitrogen atom, and have found broad applicability in fields ranging from medicinal chemistry to biomaterials. In this chapter, we provide a step-by-step protocol for the solid phase submonomer synthesis of azapeptides, which includes three steps: (1) hydrazone activation and coupling onto a resin-bound peptide, (2) chemoselective semicarbazone functionalization for installation of the aza-amino acid side chain, and (3) orthogonal deprotection of the semicarbazone to complete the monomer addition cycle. We focus on semicarbazone functionalization by N-alkylation with primary alkyl halides, and describe conditions for coupling onto aza-amino acids. Such divergent methods accelerate the synthesis of peptidomimetics and allow the rapid introduction of a wide variety of natural and unnatural side chains directly on solid support using easily accessible submonomers.

Total synthesis of TRADD death domain with arginine N-GlcNAcylation by hydrazide-based native chemical ligation

TNFR1-associated death domain protein (TRADD) with arginine N-GlcNAcylation is a novel and structurally unique posttranslational modification (PTM) glycoprotein that blocks the formation of death-inducing signaling complex (DISC), orchestrating host nuclear factor κB (NF-κB) signaling in entero-pathogenic Escherichia coli (EPEC)-infected cells. This particular glycosylated modification plays an extremely vital role for the effective colonization and pathogenesis of pathogens in the gut. Herein we describe the total synthesis of TRADD death domain (residues 195–312) with arginine235 N-GlcNAcylation (Arg-GlcNAc TRADD (195–312)). Two longish peptidyl fragments of the wild-type primary sequence were obtained by robust, microwave-assisted, highly efficient, solid-phase peptide synthesis (SPPS), the N-GlcNAcylated sector was built by total synthesis and attached specifically to resin-bound peptide with an unprotected ornithine residue via silver-promoted on-resin guanidinylation, Arg-GlcNAc TRADD (195–312) was constructed by hydrazide-based native chemical ligation (NCL). The facile synthetic strategy is expected to be generally applicable for the rapid synthesis of other proteins with Arg-GlcNAc modification and to pave the way for the related chemically biological study.

Solid-Phase Thiol-Ene Lipidation of Peptides for the Synthesis of a Potent CGRP Receptor Antagonist.

We report a new method herein coined SP-CLipPA (solid-phase cysteine lipidation of a peptide or amino acid) for the synthesis of mono-S-lipidated peptides. This technique utilizes thiol-ene chemistry for conjugation of a vinyl ester to a free thiol of a semiprotected, resin-bound peptide. Advantages of SP-CLipPA include: ease of handling, conversions of up to 91 %, by-product removal by simple filtration, and a single purification step. Additionally, the desired lipidated products show high chromatographic separation from impurities, thus facilitating RP-HPLC purification. To showcase the utility of SP-CLipPA, we synthesized a potent calcitonin gene-related peptide (CGRP) receptor antagonist peptide in excellent yield and purity. This peptide, selected from a series of lipidated analogues of CGRP8-37 and CGRP7-37 , has potential for the treatment of migraine.

Resin-Bound Crypto-Thioester for Native Chemical Ligation.

The resin-bound N-sulfanylethylanilide (SEAlide) peptide was found to function as a crypto-thioester peptide. Exposure of the peptide resin to an aqueous solution under neutral conditions in the presence of thiols affords thioesters without accompanying racemization of C-terminal amino acids. Furthermore, the resin-bound SEAlide peptides react with N-terminal cysteinyl peptides in the absence of phosphate salts to afford ligated products, whereas soluble SEAlide peptides do not. This unexpected difference in reactivity of the SEAlide peptides allows for a one-pot/three-fragment ligation using resin-bound and unbound peptides.

An entirely fmoc solid phase approach to the synthesis of daptomycin analogs.

Daptomycin is an important Ca2+ -dependent cyclic lipodepsipeptide antibiotic used to treat serious gram-positive infections. The search for daptomycin analogs with improved activity and their application as tools for studying its mechanism of action has prompted us to develop an entirely Fmoc solid phase approach to the synthesis of daptomycin analogs. Key to the success of this approach was the development of conditions that allowed for the formation of the ester bond on resin-bound peptides consisting of residues 1-10 and the decanoyl lipid tail. The esterification reaction proceeded more efficiently on Tentagel resin as opposed to standard polystyrene resin. This approach was used to synthesize a series of analogs in which each position of Dap-E12-W13, a relatively active daptomycin analog, was individually substituted by alanine. Only positions 2, 6, and 11 were found to be amenable to substitution by alanine in that the corresponding alanine analogs were only 1.5- to 4-fold less active than Dap-E12-W13. We also found that the daptomycin analog, Dap-K6-E12-W13, exhibits in vitro activity approaching that of daptomycin at physiological Ca2+ concentration. Studies with Dap-K6-E12-W13 and model liposomes indicate that this analog interacts with membranes by the same mechanism as daptomycin. This analog is currently being used as a lead for the development daptomycin analogs with improved activity.