Resin-bonded Fixed Dental Prostheses Research Articles

Failure and complication rates of different materials, designs, and bonding techniques of ceramic cantilever resin-bonded fixed dental prostheses for restoring missing anterior teeth: A systematic review and meta-analysis.

The objective of this review was to assess clinical trials that have examined the materials, design, and bonding of ceramic cantilevered resin-bonded fixed dental prostheses (RBFDPs) as a potential option for replacing missing anterior teeth. The evaluation primarily focuses on the rate of restoration failure and clinical complications. A thorough search of databases including PubMed/MEDLINE, Scopus, and the Cochrane Library, was conducted. The most recent search was performed in October 2023. Clinical studies that compared ceramic cantilevered RBFDPs with double retainers or cantilevered RBFDPs using different ceramic materials or bonding systems were included. The outcome measures considered were restoration failure and complication rates. Twelve studies met the eligibility criteria. The pooled data showed a statistically significant decrease in complication events when using cantilever designs compared with double retainer designs (p < 0.05); however, there were no differences found between the two designs in terms of restoration failure. The complication and failure rate of cantilever RBFDPs did not show a statistically significant difference with or without ceramic primer application before luting with phosphate monomer-containing luting resin (p > 0.05). Ceramic cantilevered RBFDPs have lower complication rates compared with those with double retainers. The use of a ceramic primer prior to luting composite resin for ceramic cantilevered RBFDPs decreases the occurrence of complications and failures, although this effect was not statistically significant. Additional research is required to confirm these findings. Glass ceramic cantilever RBFDPs showed a decrease in success after 6 years, requiring ongoing monitoring, but both zirconia and glass-infiltrated alumina cantilever RBFDPs have demonstrated durability with excellent long-term success and survival rates for up to 10 and 15 years. Cantilever ceramic RBFDPs in the anterior region are a less invasive and valuable treatment option, providing good esthetic results.

Full-ceramic resin-bonded fixed dental prostheses: A systematic review.

Despite the development of implant-supported prostheses, there are still patients for whom conservative treatments such as resin-bonded fixed dental prostheses (RBFDPs) are more appropriate. This study's objective was to analyze the available research on full-ceramic RBFDPs. In this study, Web of Science, MEDLINE/PubMed, Scopus, Embase, Cochrane Library, and Google Scholar databases were searched for articles published in English between 2010 and 2020. A total of 14 studies were reviewed based on the eligibility criteria. The results showed that using a cantilever design with one abutment had an advantage over two abutments. Additionally, it was proposed that preparations designed with retentive aids, such as a proximal box, groove, and pinhole, could improve RBFDP survival rates. IPS e.max ZirCAD, In-Ceram alumina, and zirconia CAD/CAM were the most commonly used framework materials. Most studies used air abrasion, salinization, or hydrofluoric acid for surface treatment. Adhesive resin cements were the most frequently used type of cement. The survival rate of In-Ceram ceramics (85.3%-94.8%) was lower than that of In-Ceram zirconia and IPS e.max ZirCAD. Debonding, followed by framework fracture, was the leading cause of failure. Following 3-10 years follow-up, the survival percentage of all-ceramic RBFDPs ranged from 76% to 100%. Although RBFDPs have demonstrated satisfactory success as a conservative treatment, long-term follow-ups and higher sample sizes in clinical research are required to gain more reliable outcomes on the clinical success rate of various RBFDP designs.

Marginal fit and retention force of zirconia resin-bonded fixed dental prostheses in the posterior region with different designs

Background/purposeRetainer debonding of resin-bonded fixed dental prostheses (RBFDPs) is one of the major reasons for their lower survival rates than fixed dental prostheses (FDPs) with full-coverage crowns. Recent advances in milling technology have enabled the fabrication of RBFDPs with complex retainers (D-shaped designs). This study aimed to assess the marginal fit and retention force of zirconia RBFDPs with inlay-, L-, and D-shaped designs to clarify their clinical applications. Materials and methodsThree abutment teeth models without maxillary second premolars were created using inlay-, L-, and D-shaped retainer designs. The zirconia RBFDPs were designed and fabricated according to the manufacturer’s instructions (n = 10). The marginal gap was measured using the silicone replica technique. Zirconia frameworks were bonded to the abutment teeth using resin cement. Tensile test was conducted after thermal cycling and dynamic loading tests. The loads during debonding or fracture were recorded. The failure pattern was analyzed by observing the fracture surface using a scanning electron microscope. ResultsD-shaped RBFDPs showed a significantly larger marginal gap than inlay- and L-shaped RBFDPs (P < 0.05). However, the mean marginal values were clinically acceptable (<120 μm). The D-shaped model exhibited the highest tensile strength in the tensile tests. The inlay-shaped and most of the D-shaped RBFDPs experienced debonding with cohesive failure, whereas the L-shaped RBFDPs showed fractures near the connector. ConclusionThe D-shaped retainer design was superior to the inlay- and L-shaped designs with respect to the inhibition of retainer debonding. However, the marginal fitness needs to be improved.

Application of single anterior teeth defect with computer-aided design and computer-aided manufacturing polymethyl methacrylate single-retainer resin-bonded fixed dental prosthesis in children

Objective: To explore the clinical effect of computer-aided design and computer-aided manufacturing (CAD/CAM) polymethyl methacrylate (PMMA) single-retainer resin-bonded fixed dental prosthesis (RBFDP) for single anterior teeth defect. Methods: A total of 14 children between 10-14 years old (male 8, female 6) who visited the Department of Pediatric Dentistry, School of Stomatology, The Fourth Military Medical University from March to December 2022 with single anterior teeth loss were enrolled in this study. The intraoral scanner was used to obtain their digital impressions, and then the data were imported into CAD software. The single-retainer RBFDP was designed by the CAD software and was manufactured by milling equipment using CAD/CAM PMMA disk. The prosthesis was then tried-in and bonded to the abutment teeth with resin cement and evaluated in a 12 month follow-up observation. The marginal discoloration, marginal adaptation, color match, secondary caries, the occurrence of fractures and loose of abutment tooth were examined on the basis of the modified United States Public Health Services evaluation system. The evaluation was divided into three scores, in which score A indicated ideal restoration effect, score B means that the restoration effect was acceptable (evaluation of restoration integrity, loose of abutment teeth and secondary caries excluded), and score C indicates that the restoration effect is not good. Results: All the 14 CAD/CAM PMMA single-retainer RBFDP had good marginal adaptation and color match with no marginal discoloration, no secondary caries, no fracture of restorations and no abnormal loose of the abutment teeth. All of the six criteria achieved score A evaluation after a three month follow-up observation. One restoration was classified as score B for fracture after a six month follow-up observation, while two restoration were classified as score B for marginal discoloration after 12 month follow-up observation. Conclusions: The CAD/CAM PMMA single-retainer RBFDP was clinically effective in restoration of single anterior teeth defect in children.

Esthetic and functional rehabilitation of a patient with a bilateral cleft of lip, alveolar process, and palate with anterior all-ceramic cantilever resin-bonded fixed dental prostheses.

Addressing a single-tooth gap in the anterior region, resulting from aplasia or trauma, poses both esthetic and functional challenges. This case report presents the restoration of a young adult with a cleft, exhibiting anterior hypoplasia and aplasia in the canine and incisor regions, using all-ceramic cantilever resin-bonded fixed dental prostheses. After verification of esthetic and functional considerations through a diagnostic wax-up and an intraoral mock-up, three anterior all-ceramic cantilever resin-bonded fixed dental prostheses made of veneered zirconium dioxide were planned in the region of the maxillary right lateral incisor and maxillary left canine. The impression was made with an intraoral scanner. The framework fit was evaluated. Glaze firing and full adhesive cementation under rubber dam followed. The final restoration met the patients' expectations and restored facial esthetics and function. All-ceramic cantilever resin-bonded fixed dental prostheses offer a promising minimally invasive therapeutic option for cleft patients.

A 32-month evaluation of lithium disilicate cantilever resin-bonded fixed dental prostheses to replace a missing maxillary incisor

The absence of a tooth in the esthetic zone can cause emotional and social distress. The use of minimally invasive and visually pleasing lithium disilicate resin-bonded fixed dental prostheses (RBFDPs) may be a suitable option for replacing a missing maxillary incisor. However, the available literature on lithium disilicate cantilever RBFDPs is limited. This retrospective multicenter study assessed the survival and success rates of lithium disilicate anterior cantilever RBFDPs with an average follow-up period of 3 years up to 9 years. RBFDPs delivered by 3 operators were clinically assessed for survival using a modified United States Public Health Service criteria list. The incidence density was determined for each criterion and operator. The standard error and 95% confidence interval were calculated for each incidence density difference (α=.05 for all analyses). A total of 108 RBFDPs were evaluated after a mean period of 32.45 months, ranging from 14 days to 111 months. None of the restorations exhibited failure, carious lesions, or fractures during the follow-up period. The primary reasons for reduced success rates were inflammation of the surrounding soft tissues and discoloration, with incidence densities of 0.074 and 0.057 per year, respectively. Significant differences were observed among RBFDPs from different operators for criteria that included adaptation, color match, marginal adaptation, polishability, surface staining, gingival health, and antagonist wear. Cantilever lithium disilicate RBFDPs appear to be suitable for short-term restoration. RBFDPs exhibited visible changes after short-term follow-up. However, these changes did not result in failure.

Patient satisfaction following resin-bonded fixed dental prostheses cemented by using the Dahl concept.

Resin-bonded fixed dental prostheses (RBFDPs) cemented at an increased occlusal vertical dimension (OVD) (the Dahl concept) to create space for a metal retainer remains controversial because of the lack of reported clinical studies. This study analyzed the demographic (age and sex) and clinical factors (location and arch of prosthesis) affecting the patients' perception of RBFDPs cemented at an increased OVD. Twenty-eight participants treated with cantilevered RBFDP at an increased OVD were prospectively recruited. They were asked to answer a validated patient satisfaction questionnaire based on six parameters during the 12-week review visit. 71.4% of the participants were completely satisfied with the color, shape, and function. Twenty-one (75%) participants reported no complaints about the prostheses. 89.3% will recommend this treatment option to others. There was a significant difference between males and females in avoiding loading on the prostheses (p = 0.015). The level of satisfaction did not differ by age, ethnicity, location, and arch of the prostheses (p > 0.05). Patient satisfaction toward RBFDP cemented by using the Dahl approach was generally high on all the parameters at the 12-week review visit.

Survival and debonding resistance of posterior cantilever resin-bonded fixed dental prostheses for moderately and severely worn dentition during thermomechanical loading.

The purpose of this study was to investigate the survival rate, the debonding resistance, and the failure modes of different occlusal veneer designs when used as a retainer for posterior cantilever, resin-bonded fixed dental prostheses (RBFDPs) at two tooth wear levels. Four test groups were assigned: two groups with occlusal-proximal preparation (PT1 and PT2 for grade 2 and 3 wear), and two groups for occlusal-proximal and lingual preparation (PLT1 and PLT2 for grade 2 and 3 wear) Monolithic zirconia ceramic (3Y-TZP) RBFDPs were luted with an adhesive bonding system (Panavia V5). The specimens underwent a chewing simulation for 1.200.000 cycles with a load of 5kg and thermocycling for 7500 cycles between 5°C and 55°C. The surviving restorations were debonded under quasi-static conditions. The results were analyzed with ANOVA. The specimens exhibited a 100 % survival rate after thermomechanical fatigue loading. The debonding resistance was statistically significant higher for group PLT1 than for group PT1 (P=0.004), and higher for group PT2 than group PT1 (P≤0.001). However, the debonding resistance showed no statistically significant difference between groups PT2 and PLT2 (P=0.343), and groups PLT1 and PLT2 (P=0.222). Groups PT1 and PT2 showed favorable failure modes in 62.5 % and 0.00 % of the specimens, respectively. While groups PLT1 and PLT2 presented 25 % favorable failure modes. Occlusal veneers showed promising results as a retainer for cantilever RBFDPs. The lingual extension might increase debonding resistance. Nevertheless, conservative designs with lingual and proximal bevels are to be recommended, irrespective of the level of tooth wear.

Bonding Performance of Surface-Treated Zirconia Cantilevered Resin-Bonded Fixed Dental Prostheses: In Vitro Evaluation and Finite Element Analysis

Debonding of zirconia cantilevered resin-bonded fixed dental prostheses (RBFDPs) remains the main treatment complication, therefore, the present in vitro study aimed to evaluate the effect of different surface pretreatments on the bonding of zirconia RBFDPs. Eighty milled zirconia maxillary central incisors, with complementary zirconia cantilevered RBFDPs, were randomly subjected to four different surface pretreatments (n = 20): as-machined (AM); airborne-particle abraded (APA); coated with nanostructured alumina coating (NAC); incisor air-abraded and RBFDP coated (NAC_APA). After bonding, half of each group (n = 10) was stored in deionized water (150 days/37 °C), thermocycled (37,500 cycles, 5-55 °C), and cyclically loaded (50 N/1.2 × 106). Load-bearing capacity (LBC) was determined using a quasi-static test. Additionally, finite element analysis (FEA) and fractography were performed. t-test and one-way ANOVA were used for statistical-analysis. Before aging, the NAC group provided superior LBC to other groups (p < 0.05). After aging, the AM specimens debonded spontaneously, while other groups exhibited comparable LBC (p ˃ 0.05). The FEA results correlated with the in vitro experiment and fractography, showing highly stressed areas in the bonding interface, cement layer, and in RBFDP's retainer wing and connector. The NAC RBFDPs exhibited comparable long-term bonding performance to APA and should be regarded as a zirconia pretreatment alternative to APA.

Resin-bonded attachments made of monolithic zirconia ceramic: a minimally invasive and esthetic treatment approach.

The aim of this case report was to present a minimally invasive and esthetic treatment approach for the replacement of missing teeth removable partial dentures retained by zirconia ceramic resin-bonded attachments. The resin-bonded attachments were digitally designed and milled using CAD/CAM technology from monolithic 3Y-TZP zirconia ceramic. The resin-bonded attachments had an optimized attachment design approved for zirconia ceramic. The preparation was based on general preparation guidelines for resin-bonded attachments and resin-bonded fixed dental prostheses (RBFDPs). After placement of rubber dam, the resin-bonded attachments were bonded with a phosphate monomer-containing luting resin. The presented resin-bonded attachment-retained removable partial denture was successful over 30 months of clinical observation without any complications. The patient was satisfied with the minimally invasive treatment procedure. Zirconia ceramic resin-bonded attachments fabricated with a special attachment design are an esthetic and minimally invasive treatment approach. However, clinical data on the long-term outcome of zirconia resin-bonded attachments are still needed. (Quintessence Int 2023;54:220-226; doi: 10.3290/j.qi.b3819523).

Restoration of Missing Central Incisor with Cantilevered Zirconia Resin Bonded Fixed Dental Prosthesis

Missing teeth in the anterior region can be a source of great aesthetic concern for the patient and its restoration presents an even greater challenge to the dentist. Invasive prosthodontic treatment modalities have many biological and biomechanical shortcomings. This clinical report presents a minimally invasive treatment option for a 17-year-old boy who wanted a replacement for his missing upper left central incisor, primarily due to aesthetic concerns. Missing tooth was restored with cantilevered zirconia resin bonded fixed dental prosthesis that has a durable functional and aesthetic outcome

Cantilever resin-bonded fixed dental prosthesis to substitute a single premolar: Impact of retainer design and ceramic material after dynamic loading.

To evaluate the influence of retainer design and ceramic materials on the durability of minimally invasive cantilever resin-bonded fixed dental prostheses (RBFDPs) after artificial aging. One hundred caries-free human mandibular molars were prepared as abutments for all-ceramic cantilevered fixed dental prostheses using the following retainer designs: One wing (OW), Two wings (TW), Inlay ring (IR), Lingual coverage (LC), and Occlusal coverage (OC). Two ceramic materials were used: monolithic high translucent zirconia(z) and zirconia-reinforced lithium disilicate (ZLS2) (n=10). All restorations were adhesively bonded with resin cement. The thermocycling of the specimens were performed between 5°C and 55°C for 10,000 cycles and then exposed to 240.000 cycles of dynamic loading on a chewing simulator. All surviving specimens were loaded onto the pontic until failure using a universal testing machine. The mean failure load ranged from 124.00 to 627.00 N for the zirconia groups and from 133.30 to 230.00 N for the ZLS2 groups. Regarding the materials, a significantly higher failure load was recorded in the zirconia groups than in the ZLS2 groups (P<0.001), except for OW (P=0.748). Regarding the retainer designs, a significant different failure load was recorded between the different designs except for IR and LC in the zirconia groups, IR and OC, OW and TW, and TW and LC in the ZLS2 groups (P<0.001). Zirconia IR, LC, and OC can be used as cantilever RBFDP in the premolar region. The fracture resistance of the ZLS2 design was below the normal bite force and should not be recommended as the first option.

Single-retainer all-ceramic resin-bonded fixed dental prostheses: Long-term outcomes in the esthetic zone.

To present an update on the concept of cantilevered single-retainer all-ceramic resin-bonded fixed dental prostheses (RBFDPs) first presented 25 years ago in the Journal of Esthetic Dentistry. The initially presented case of the concept was followed clinically over 26 years and is presented along with two additional clinical long-term cases using varying methods to obtain an esthetic and hygienic ovate pontic design. Veneered alumina and zirconia ceramic (3mol% yttria-tetragonal zirconia polycrystalline ceramic; 3Y-TZP) was used and bonded with a phosphate monomer containing luting resin after 50 μm alumina particle air-abrasion at 0.25 MPa pressure. The restorations replacing incisors did not debond and soft tissues in the pontic area were maintained over 26 years. Cantilevered single-retainer all-ceramic RBFDPs today made from veneered 3Y-TZP zirconia ceramic can be considered a standard of care for the replacement of single incisors and provide an excellent esthetic outcome with a long-term preservation of soft tissues in the pontic area. Bonding nonretentive oxides ceramics such as alumina and zirconia ceramic with phosphate monomer containing luting resins after alumina particle air-abrasion is durable over decades. This proves that bonding to zirconia ceramic is not of any problem when adequate methods are used. Single-retainer zirconia ceramic RBFDPs maintain soft tissues in the edentulous area of single missing incisors and often deem implants unessential for this indication.

Effect of different designs of minimally invasive cantilever resin-bonded fixed dental prostheses replacing mandibular premolar: Long-term fracture load and 3D finite element analysis.

To evaluate the fracture load and stress magnitude of different retainer designs of minimally invasive cantilever resin-bonded fixed dental prostheses (RBFDPs) after artificial aging. Fifty caries-free human mandibular molars were prepared as abutments for cantilever fixed dental prostheses using different retainer designs: one wing (OW), two wings (TW), inlay ring (IR), lingual coverage (LC), and occlusal coverage (OC). Computer-aided design and computer-aided manufacturing were used for milling the RBFDPs using fiber-reinforced composite (FRC), and the restorations were adhesively bonded. The specimens were then subjected to thermomechanical aging and loaded until failure. The 3D finite element analysis (FEA) was performed with five models of retainer designs similar to the in vitro test. Modified von Mises stress values on enamel, dentine, luting resin, and restorations were examined. Data were analyzed with Kruskal-Wallis and Mann-Whitney U tests (p<0.001). A statistically significant difference (p<0.001) was found between all groups except between IR and LC and between OW and TW designs, with the highest mean failure load detected for OC (534.70N) and the lowest detected for OW (129.80N). With regard to failure mode, OW, TW, and LC showed more incidences of favorable failure patterns than IR and OC designs. FEA showed that FRC transmitted low stresses in tooth structure and high stresses to the luting resin. LC and OC designs can be used to design cantilever RBFDPs in premolar area. IR design transmitted more stresses to the tooth structure and resulted in 30% catastrophic failure. OW and TW were below the normal occlusal force and should be carefully used.

Validation of a shape-optimized 2-unit cantilevered inlay-retained fiber-reinforced resin-bonded dental prosthesis

Statement of problemCurrent designs of fiber-reinforced composite (FRC) resin-bonded fixed dental prostheses (RBFDPs) have a limited lifespan, failing mainly through veneer-fiber delamination, debonding, and fracture. PurposeThe purpose of this in vitro study was to validate a new inlay-retained 2-unit cantilevered RBFDP with an optimized cavity and fiber layout proposed in a previous study by using simulated occlusal loading. Material and methodsTwo groups of specimens (n=20), 1 with and 1 without glass fibers, were used to test the influence of the cavity design and that of the fiber layout on their load capacity, respectively. The specimens without fibers were directly cut from a resin-ceramic block by using a computer-aided manufacturing system, while those with fibers were manually fabricated with unidirectional glass fibers and composite resin in a silicone mold. The specimens with and without fibers were attached to abutments made of the same resin-ceramic with a cyanoacrylate-based adhesive and a resin-based dental cement, respectively. An increasing compressive load was applied on the mesial fossa of the premolar pontic until failure. Cracking in the specimens during loading was monitored with a 2-channel acoustic emission (AE) system. ResultsAll the specimens without fiber reinforcement debonded from the abutments. Those using the optimized shovel-shaped cavity design had a mean ±standard deviation failure load (50.0 ±17.3 N) that was 193% higher than that of those with the conventional step-box design (17.1 ±6.2 N; P<.001). No significant difference was found between the groups for the mean number of AE events per specimen (step-box: 49 ±34 versus shovel-shaped: 63 ±34; P=.427), the mean amplitude of each event (58.4 ±1.3 dB versus 59.5 ±2.4 dB; P=.299), or the mean time to failure (283.2 ±122.3 seconds versus 297.5 ±66.7 seconds; P=.798). Between the groups of specimens with reinforcing fibers, the mean failure load of the conventional design was approximately half that of the optimized one. Again, no significant difference was found for the mean number of AE events per specimen (conventional: 28 ±18 versus optimized: 52 ±53; P=.248) or the mean amplitude for each AE event (64.9 ±4.2 dB versus 61.7 ±5.2 dB; P=.187). The connectors of 8 fiber-reinforced specimens with the conventional design fractured; the other 2 debonded from the abutments. Half of the shape-optimized fiber-reinforced specimens had fractured abutments, but the cantilevers remained intact, 4 specimens fractured at the connector, and only 1 debonded from its abutment. ConclusionsThe shape-optimized 2-unit cantilevered FRC RBFDP had a higher load capacity than the conventional design.

Comparison of Tensile Bond Strength of Fixed-Fixed Versus Cantilever Single- and Double-Abutted Resin-Bonded Bridges Dental Prosthesis.

Resin-bonded fixed dental prostheses (RBFDP) are minimally invasive alternatives to traditional full-coverage fixed partial dentures as they rely on resin cements for retention. This study compared and evaluated the tensile bond strength of three different resin-bonded bridge designs, namely, three-unit fixed-fixed, two-unit cantilever single abutment, and three-unit cantilever double-abutted resin-bonded bridge. Furthermore, the study attempted to compare the tensile bond strengths of the Maryland and Rochette types of resin-bonded bridges. Based on the inclusion and exclusion criteria, a total of seventy-five extracted maxillary incisors were collected and later were mounted on the acrylic blocks. Three distinct resin-bonded metal frameworks were designed: three-unit fixed-fixed (n = 30), two-unit cantilever single abutment (n = 30), and a three-unit cantilever double abutment (n = 30). The main groups were further divided into two subgroups based on the retainer design such as Rochette and Maryland. The different prosthesis designs were cemented to the prepared teeth. Later, abutment preparations were made on all specimens keeping the preparation as minimally invasive and esthetic oriented. Impression of the preparations were made using polyvinyl siloxane impression material, followed by pouring cast using die stone. A U-shaped handle of 1.5 mm diameter sprue wax with a 3 mm hole in between was attached to the occlusal surface of each pattern. The wax patterns were sprued and cast in a cobalt–chromium alloy. The castings were cleaned by sandblasting, followed by finishing and polishing. Lastly, based on the study group, specimens for Rochette bridge were perforated to provide mechanical retention between resin cement and metal, whereas the remaining 15 specimens were sandblasted on the palatal side to provide mechanical retention (Maryland bridge). In order to evaluate the tensile bond strength, the specimens were subjected to tensile forces on a universal testing machine with a uniform crosshead speed. The fixed-fixed partial prosthesis proved superior to both cantilever designs, whereas the single abutment cantilever design showed the lowest tensile bond strength. Maryland bridges uniformly showed higher bond strengths across all framework designs. Within the limitations of this study, the three-unit fixed-fixed design and Maryland bridges had greater bond strengths, implying that they may demonstrate lower clinical failure than cantilever designs and Rochette bridges.

Conventional and Resin-bonded Fixed Dental Prostheses

Conventional and Resin-bonded Fixed Dental Prostheses

Replacement of Two Missing Adjacent Teeth with Two Single-Retainer Resin-Bonded Fixed Dental Prostheses with Improved Proximal Design.

To present a minimally invasive treatment approach for the replacement of two missing adjacent teeth with two single-retainer resin-bonded fixed dental prostheses (RBFDPs). Two missing adjacent premolars were restored by two RBFDPs with an innovative design of the proximal section. Both RBFDPs were digitally designed and milled from monolithic 3Y-TZP zirconia ceramic using CAD/CAM. Following construction of the anterior RBFDP, a shallow interlock was designed in the area of proximal contact in the same insertion direction as the posterior RBFDP. In this way, different paths of insertion of the RBFDPs could be provided without compromising the proximal hygiene capability. The presented minimally invasive restorations were successful over 5 years of clinical bservation without any complications. The presented restoration design secures the transversal position of the RBFDPs while maintaining physiologic tooth mobility. In addition, it allows for varying paths of insertion while improving hygienic conditions. Last, in case of a unilateral debonding of one retainer wing, rebonding might be possible. Int J Prosthodont 2023;36:155-160. doi: 10.11607/ijp.7711.

Effect of firing procedures and layering thickness of porcelain on internal adaptation of zirconia cantilever resin-bonded fixed dental prostheses.

This study evaluated the influence of firing procedures and layering thickness of porcelain on internal adaptation of maxillary anterior cantilever zirconia resin-bonded fixed dental prostheses (RBFDPs). The maxillary right central incisor on a model was prepared for a single-retainer zirconia RBFDP. A total of 36 frameworks of cantilever zirconia RBFDPs were classified into three groups (CB0.5, CB1.0, and CB2.0 groups) based on the thickness of the cut-back on the facial surface (0.5 mm, 1.0 mm, and 2.0 mm, respectively). Feldspathic porcelain was layered onto the facial surface of the zirconia RBFDP frameworks. Internal space widths between the abutment tooth and the framework were measured before and after porcelain firing by a replica technique. The internal space values before and after porcelain firings were compared using the paired t-test within the same group (α = 0.05). Differences in internal space values (distortion) between before and after porcelain firing were compared using one-way analysis of variance and Tukey multiple comparison tests. For all framework designs, internal space values after porcelain firing were significantly higher than those before firing. Among all groups, the CB0.5 group showed the lowest internal distortion values for the whole measured area. The CB2.0 group showed higher distortion values than the CB1.0 group. Porcelain firing procedures negatively impacted the internal space in cantilever zirconia RBFDPs. In addition, the increased volume of layering porcelain had a negative effect on the internal distortion of maxillary anterior cantilever zirconia RBFDPs.

Clinical evaluation of zirconia cantilevered single-retainer resin-bonded fixed dental prostheses replacing missing canines and posterior teeth

ObjectivesThis clinical study evaluated the outcome and survival rate of resin-bonded fixed dental prostheses (RBFDPs) made of 3Y-TZP zirconia ceramic with a single-retainer design in the replacement of missing canines, premolars and molars. MethodsTwenty-one patients that were provided with twenty-seven cantilevered zirconia ceramic RBFDPs replacing maxillary or mandibular missing canines or posterior teeth were recruited from the patients’ database at the University of Kiel, Germany. The preparation of the abutment teeth was minimal and limited to the enamel and consisted of a retainer wing and an occlusal rest on the abutment tooth. The restorations were observed over up to 12 years. ResultsThe patient age ranged from 16 to 72 years old with a mean age of 34 ± 21 years and 57% were females and 43% were males. The restorations were observed for a mean period of 53 ± 39 months with a minimum of 13 months and a maximum of 151 months of observation. No debonding for any of the restorations was detected, which amounts up to a survival rate of 100%. The development of treatable cervical caries on one abutment tooth of an elderly patient without extending to the retainer wing was the only recorded complication. ConclusionsZirconia ceramic single-retainer RBFDPs provide an esthetic, functional and minimally invasive treatment alternative to replace missing canines, premolar and molars with promising results due to excellent clinical outcome resulting from a survival rate of 100% and a success rate of 96.3% over a mean observation time of 53 ± 39 months. Clinical significanceZirconia ceramic single-retainer RBFDPs might be a valid minimally-invasive option for replacing missing canines and missing teeth in the posterior area especially for young patients, in whom implants are contraindicated and conventional fixed dental prostheses are too invasive.