Resin-based Dental Composites Research Articles

Dental biomaterials redefined: molecular docking and dynamics-driven dental resin composite optimization

BackgroundDental resin-based composites are widely recognized for their aesthetic appeal and adhesive properties, which make them integral to modern restorative dentistry. Despite their advantages, adhesion and biomechanical performance challenges persist, necessitating innovative strategies for improvement. This study addressed the challenges associated with adhesion and biomechanical properties in dental resin-based composites by employing molecular docking and dynamics simulation.MethodsMolecular docking assesses the binding energies and provides valuable insights into the interactions between monomers, fillers, and coupling agents. This investigation prioritizes SiO2 and TRIS, considering their consistent influence. Molecular dynamics simulations, executed with the Forcite module and COMPASS II force field, extend the analysis to the mechanical properties of dental composite complexes. The simulations encompassed energy minimization, controlled NVT and NPT ensemble simulations, and equilibration stages. Notably, the molecular dynamics simulations spanned a duration of 50 ns.ResultsSiO2 and TRIS consistently emerged as influential components, showcasing their versatility in promoting solid interactions. A correlation matrix underscores the significant roles of van der Waals and desolvation energies in determining the overall binding energy. Molecular dynamics simulations provide in-depth insights into the mechanical properties of dental composite complexes. HEMA-SiO2-TRIS excelled in stiffness, BisGMA-SiO2-TRIS prevailed in terms of flexural strength, and EBPADMA-SiO2-TRIS offered a balanced combination of mechanical properties.ConclusionThese findings provide valuable insights into optimizing dental composites tailored to diverse clinical requirements. While EBPADMA-SiO2-TRIS demonstrates distinct strengths, this study emphasizes the need for further research. Future investigations should validate the computational findings experimentally and assess the material's response to dynamic environmental factors.

Impact of optical fiber-based photo-activation on dental composite polymerization

ObjectivesThe study aimed to introduce a novel two-step optical fiber-based photo-activation of dental resin-based composites (RBCs) for reducing polymerization shrinkage stress (PSS). MethodsProposed protocol design – in the first step, two flexible plastic optical fibers connected to a dental light curing unit (LCU), were used as light guides inserted into the filling to initiate low-irradiance polymerization from within; in the second step, fibers were extracted and remaining voids were filled with RBC, followed by conventional high-irradiance curing to finalize polymerization. Three bulk-fill RBCs were tested (Beautifil-Bulk Restorative, Filtek Bulk-fill Posterior, Tetric PowerFill) using tooth cavity models. Three non-invasive examination techniques were employed: Digital Holographic Interferometry, Infrared Thermography, and Raman spectroscopy for monitoring model deformation, RBC temperature change, and degree of conversion (DC), respectively. A control group (for each examined RBC) underwent conventional photo-activation. ResultsThe experimental protocol significantly reduced model deformation by 15 – 35 %, accompanied by an 18 – 54 % reduction in RBC temperature change, emphasizing the impact of thermal shrinkage on PSS. Real-time measurements of deformation and temperature provided indirect insights into reaction dynamics and illuminated potential mechanisms underlying PSS reduction. After a 24-hour dark-storage period, DC outcomes comparable to conventional curing were observed, affirming the clinical applicability of the method. ConclusionsProtocol involving the use of two 1.5 mm fibers in the first step (300 mW/cm2 x 10 s), followed by a second conventional curing step (1000 mW/cm2 x 10 s), is recommended to achieve the desired PSS reduction, while maintaining adequate DC and ensuring efficient clinical application. Clinical SignificanceObtained PSS reduction offers promise in potentially improving the performance of composite restorations. Additionally, leveraging the flexibility of optical fibers improves light guide approach for restorations on posterior teeth. Meanwhile, implementation in clinical practice is easily achievable by coupling the fibers with commercial dental LCUs using the provided plastic adapter.

Exploring the Effect of Cetylpyridinium Chloride Addition on the Antibacterial Activity and Surface Hardness of Resin-Based Dental Composites.

The aim of this study was to evaluate the effect of cetylpyridinium chloride (CPC) addition on the antibacterial and surface hardness characteristics of two commercial resin-based dental composites (RBDCs). A total of two hundred and seventy (n = 270) specimens from Filtek Z250 Universal and Filtek Z350 XT flowable RBDCs were fabricated with the addition of CPC at 2 %wt and 4 %wt concentrations to assess their antibacterial activity using the agar diffusion test and direct contact inhibition test, and their surface hardness using the Vickers microhardness test after 1 day, 30 days, and 90 days of aging. A surface morphology analysis of the specimens was performed using a scanning electron microscope (SEM). The RBDCs that contained 2 %wt and 4 %wt CPC demonstrated significant antibacterial activity against Streptococcus mutans up to 90 days, with the highest activity observed for the 4 %wt concentration. Nevertheless, there was a reduction in antibacterial effectiveness over time. Moreover, compared to the control (0 %wt) and 2 %wt CPC groups, the universal RBDCs containing 4 %wt CPC exhibited a notable decrease in surface hardness, while all groups showed a decline in hardness over time. In conclusion, the satisfactory combination of the antibacterial effect and surface hardness property of RBDCs was revealed with the addition of a 2 %wt CPC concentration.

Does Preheating Influence the Cytotoxic Potential of Dental Resin Composites?

Resin-based dental composites (RBC) release cytotoxic components, however the extent of the elution from preheated RBCs is barely investigated. The aim was therefore to determine the cytotoxic effect of preheated conventional, bulk, and thermoviscous RBCs of clinically relevant sizes using different cell viability methods in a contact-free model. Samples (6 × 4 mm) were prepared from conventional [Estelite Sigma Quick (ESQ), Filtek Z250 (FZ)] and bulk-filled [Filtek One BulkFill Restorative (FOB), SDR Plus Bulk Flow (SDR), VisCalor Bulk (VCB)] RBCs. The pre-polymerization temperature was set to room temperature (RT) and 55/65 °C. Pulp cells were cultured, followed by a 2-day exposure to monomers released from solid RBC specimens suspended in the culture medium. Cytotoxicity was assessed using a WST-1, MTT, and LDH colorimetric viability assays. Data were analyzed using one-way ANOVA, Tukey's post hoc test, multivariate analysis, and independent t-test. The effect size (ƞp2) of material and temperature factors was also assessed. All the RBCs demonstrated cytotoxic effect upon exposure to pulp cells, but to a varying extent (ESQ >> VCB > FZ = FOB = SDR). The effect of pre-polymerization temperature was insignificant (ƞp2 < 0.03), except for the thermoviscous RBC, which showed inconsistent findings when subjected to distinct viability tests. Cell viability was predominantly dependent on the type of material used (p < 0.001) which showed a large effect size (ƞp2 > 0.90). Irrespective of the pre-polymerization temperature, RBC samples in a clinically relevant size can release monomers to such an extent, which can substantially decrease the cytocompatibility.

A mini-review on different polymerization protocols for resin-based dental composites

Biocompatibility is one of the major prerequisites for safe clinical application of materials. Dental resin composites may release their components into oral environment, which can lead to adverse reactions. Several studies have identified that many organic components of composites resin, such as bisphenol-A-glycidyl-methacrylate (Bis-GMA), triethylene glycol dimethacrylate (TEGDMA), urethane dimethacrylate (UDMA) and 2-hydroxyethyl methacrylate (HEMA) show a cytotoxic profile. Cytotoxicity is mainly sustained by free monomers released after polymerization process. Direct restorations are polymerized at body temperature by visible light emitting lamps, but the conversion from monomer to polymer after light-curing is never complete. To improve the degree of conversion of resin-based composites, additional curing protocols performed at increased temperatures, such as heat-curing, can be employed. Polymerization reaction plays a key role in the conversion of the free monomers into polymers and resin-based composites with high degree of conversion might show higher biocompatibility. The aim of this mini-review is to report current knowledge about the cytotoxicity of different composite resins, cured in two different ways. Further studies are necessary to better understand the relationship between the cytotoxicity and the degree of polymerization of resin-based composites.

Considerations about Cytotoxicity of Resin-Based Composite Dental Materials: A Systematic Review.

The dental material industry is rapidly developing resin-based composites (RBCs), which find widespread use in a variety of clinical settings. As such, their biocompatibility has gained increasing interest. This literature review presents a summary of research into the cytotoxicity of methacrylate-based composites published from 2017 to 2023. Subject to analysis were 14 in vitro studies on human and murine cell lines. Cytotoxicity in the included studies was measured via MTT assay, LDH assay, and WST-1 assay. The QUIN Risk of Bias Tool was performed to validate the included studies. Included studies (based entirely on the results of in vitro studies) provide evidence of dose- and time-dependent cytotoxicity of dental resin-based composites. Oxidative stress and the depletion of cellular glutathione (GSH) were suggested as reasons for cytotoxicity. Induction of apoptosis by RBCs was indicated. While composites remain the golden standard of dental restorative materials, their potential cytotoxicity cannot be ignored due to direct long-term exposure. Further in vitro investigations and clinical trials are required to understand the molecular mechanism of cytotoxicity and produce novel materials with improved safety profiles.

COMPARATIVE ASSESSMENT OF HARDNESS OF TWO NANO-HYBRID RESIN-BASED DENTAL COMPOSITES

Objectives: To compare the hardness of two nano-hybrid resin-based dental composites. Materials and Methods: Two nano-hybrid composites i.e., Nexcomp by Meta Biomed, Korea, and Tetaric N Ceram by Ivoclar Vivadent, AG, Liechtenstein were selected, and hardness was evaluated according to ASTM E384-11e. T-test was used to statistically analyze the data. Results: The mean hardness value (VHN) of Tetaric N Ceram (78.4±3.14) was high when compared with Nexcomp (50±4.12). The statistical analysis showed a signifi cant diff erence with p-value of 0.00. Conclusion: Both composites had adequate hardness values and dental practitioners may select the material subject to the clinical situation and patient’s aff ordability.

Comprehensive assessment of the estrogenic activity of resin composites

Resin-based dental composites have been developed to restore decayed teeth or modify tooth color due to their excellent physical and chemical properties. Such composites may have intrinsic toxicity due to components released into the mouth during the early stage of polymerization, and afterward as a result of erosion or material decomposition. In addition, resin-based dental composites have potential environmental pollutant by elution of monomers and degradation. Since certain monomers of resin matrices are synthesized from bisphenol A (BPA), which acts as an estrogenic endocrine disruptor, these resin matrices may have estrogenic activity. Therefore, the estrogenic endocrine-disrupting activity of various dental composites should be evaluated. In this study, we evaluated the estrogenic endocrine-disrupting activity of 10 resin composites by using a BRET-based estrogen receptor (ER)α and ERβ dimerization assays and ER transactivation assay. BPA, BisDMA, BisGMA, BisEMA, TEGDMA, HMBP, and DMPA mediated ERα dimerization, and BPA, BisDMA, and DMPA also mediated ERβ dimerization. Except for UDMA and CQ, all the compounds were identified as estrogen agonists or antagonists. In-depth information for the safe use of dental composites was acquired, and it was confirmed how the component of dental composites acts in the ER signaling pathway. Further studies on the low-dose and long-term release of these compounds are needed to ensure the safe use of these resin-based dental composites.

In Vitro Evaluation of Candida albicans Adhesion on Heat-Cured Resin-Based Dental Composites.

Microbial adhesion on dental restorative materials may jeopardize the restorative treatment long-term outcome. The goal of this in vitro study was to assess Candida albicans capability to adhere and form a biofilm on the surface of heat-cured dental composites having different formulations but subjected to identical surface treatments and polymerization protocols. Three commercially available composites were evaluated: GrandioSO (GR), Venus Diamond (VD) and Enamel Plus HRi Biofunction (BF). Cylindrical specimens were prepared for quantitative determination of C. albicans S5 planktonic CFU count, sessile cells CFU count and biomass optical density (OD570 nm). Qualitative Concanavalin-A assays (for extracellular polymeric substances of a biofilm matrix) and Scanning Electron Microscope (SEM) analyses (for the morphology of sessile colonies) were also performed. Focusing on planktonic CFU count, a slight but not significant reduction was observed with VD as compared to GR. Regarding sessile cells CFU count and biomass OD570 nm, a significant increase was observed for VD compared to GR and BF. Concanavalin-A assays and SEM analyses confirmed the quantitative results. Different formulations of commercially available resin composites may differently interact with C. albicans. The present results showed a relatively more pronounced antiadhesive effect for BF and GR, with a reduction in sessile cells CFU count and biomass quantification.

Validation of the Orr theory in dental resin-based composites: A fractographic approach

ObjectivesThe present study aimed to assess the applicability of Orr's equation on light-cured resin-based composites (RBCs) tested in 3- and 4-point bending tests, as well as assess the operator reliability of this method. MethodsFracture mirrors of 320 specimens (n = 320) made of four RBCs that had failed in the two tests were analyzed microscopically and consequently two radii of each specimen were measured by two operators, each measuring twice. The mirror constant A was calculated using Orr's equation. The results of the two operators were compared using a t-Test and further assessment of the data was performed using a MANOVA, Tukey's post hoc test and regression analysis. ResultsWith the exception of 11 specimens, the measurement of the fracture mirror radii was carried out successfully. The calculation of the mirror constant proved successful with a high coefficient of determination (R2 > 0.98). The calculated mirror constants were operator-independent if the results of more than one measurement was taken into consideration. The ratio of the mirror constant A to the fracture toughness KIc lay between 2.1 and 2.4 for three of the four RBC. The fourth RBC had a ratio of 1.6 and was the only one where different mirror constants were observed as a function of the testing method. SignificanceThe present study proves the applicability of brittle fracture mechanics on RBCs despite them often being regarded as not brittle due to their also plastic behavior.

Fabrication of Novel Pre-Polymerized BisGMA/Silica Nanocomposites: Physio-Mechanical Considerations.

Resin composite mimics tooth tissues both in structure and properties, and thus, they can withstand high biting force and the harsh environmental conditions of the mouth. Various inorganic nano- and micro-fillers are commonly used to enhance these composites' properties. In this study, we adopted a novel approach by using pre-polymerized bisphenol A-glycidyl methacrylate (BisGMA) ground particles (XL-BisGMA) as fillers in a BisGMA/triethylene glycol dimethacrylate (TEGDMA) resin system in combination with SiO2 nanoparticles. The BisGMA/TEGDMA/SiO2 mixture was filled with various concentrations of XL-BisGMA (0, 2.5, 5, and 10 wt.%). The XL-BisGMA added composites were evaluated for viscosity, degree of conversion (DC), microhardness, and thermal properties. The results demonstrated that the addition of a lower concentration of XL-BisGMA particles (2.5 wt.%) significantly reduced (p ≤ 0.05) the complex viscosity from 374.6 (Pa·s) to 170.84. (Pa·s). Similarly, DC was also increased significantly (p ≤ 0.05) by the addition of 2.5 wt.% XL-BisGMA, with the pristine composite showing a DC of (62.19 ± 3.2%) increased to (69.10 ± 3.4%). Moreover, the decomposition temperature has been increased from 410 °C for the pristine composite (BT-SB0) to 450 °C for the composite with 10 wt.% of XL-BisGMA (BT-SB10). The microhardness has also been significantly reduced (p ≤ 0.05) from 47.44 HV for the pristine composite (BT-SB0) to 29.91 HV for the composite with 2.5 wt.% of XL-BisGMA (BT-SB2.5). These results suggest that a XL-BisGMA could be used to a certain percentage as a promising filler in combination with inorganic fillers to enhance the DC and flow properties of the corresponding resin-based dental composites.

Assessment of Microhardness of Conventional and Bulk-Fill Resin Composites Using Different Light-Curing Intensity.

(1) Background: This study evaluates the effect of a conventional/low-voltage light-curing protocol (LV protocol) (10 s with 1340 mW/cm2) and high-voltage light-curing protocol (HV protocol) (3 s with 3440 mW/cm2) on the microhardness (MH) of dental resin-based composites (RBCs). Five resin composites were tested: conventional Evetric (EVT), Tetric Prime (TP), Tetric Evo Flow (TEF), bulk-fill Tetric Power Fill (PFL), and Tetric Power Flow (PFW). (2) Materials and Methods: Two tested composites (PFW and PFL) were designed for high-intensity light curing. The samples were made in the laboratory in specially designed cylindrical molds; diameter = 6 mm and height = 2 or 4 mm, depending on the type of composite. Initial MH was measured on the top and bottom surfaces of composite specimens 24 h after light curing using a digital microhardness tester (QNESS 60 M EVO, ATM Qness GmbH, Mammelzen, Germany). The correlation between the filler content (wt%, vol%) and the MH of the RBCs was tested. For the calculation of depth-dependent curing effectiveness, the bottom/top ratio for initial MH was used. (3) Conclusions: MH of RBCs is more dependent on material composition than on light-curing protocol. Filler wt% has a greater influence on MH values compared to filler vol%. The bottom/top ratio showed values over 80% for bulk composites, while for conventional sculptable composites, borderline or suboptimal values were measured for both curing protocols.

Logistic Regression Analysis of LC-MS/MS Data of Monomers Eluted from Aged Dental Composites: A Supervised Machine-Learning Approach.

Compound identification by database searching that matches experimental with library mass spectra is commonly used in mass spectrometric (MS) data analysis. Vendor software often outputs scores that represent the quality of each spectral match for the identified compounds. However, software-generated identification results can differ drastically depending on the initial search parameters. Machine learning is applied here to provide a statistical evaluation of software-generated compound identification results from experimental tandem MS data. This task was accomplished using the logistic regression algorithm to assign an identification probability value to each identified compound. Logistic regression is usually used for classification, but here it is used to generate identification probabilities without setting a threshold for classification. Liquid chromatography coupled with quadrupole-time-of-flight tandem MS was used to analyze the organic monomers leached from resin-based dental composites in a simulated oral environment. The collected tandem MS data were processed with vendor software, followed by statistical evaluation of these results using logistic regression. The assigned identification probability to each compound provides more confidence in identification beyond solely by database matching. A total of 21 distinct monomers were identified among all samples, including five intact monomers and chemical degradation products of bisphenol A glycidyl methacrylate (BisGMA), oligomers of bisphenol-A ethoxylate methacrylate (BisEMA), triethylene glycol dimethacrylate (TEGDMA), and urethane dimethacrylate (UDMA). The logistic regression model can be used to evaluate any database-matched liquid chromatography-tandem MS result by training a new model using analytical standards of compounds present in a chosen database and then generating identification probabilities for candidates from unknown data using the new model.

Light-curing dental resin-based composites: How it works and how you can make it work

AimClinicians may become quite familiar with the rapid transformation of composite pastes to rigid solids, as a routine phenomenon in operative dentistry. But they may still lack scientific understanding of how and why this happens. Efforts to learn scientifically about the interaction between light beams and resin-composites can significantly promote effective clinical placement of restorations. Neglect of such study can result in practical procedures of light-curing that are inadequate or even seriously defective.MethodThis review addresses the underlying science and technology to elucidate how light curing works, for dental resin-based composites, including—but not limited to—bulk fill types. This involves questions concerning: (a) the particle-wave understanding of light; (b) how photons can penetrate sufficiently deeply into bulk fill composites; (c) the necessary technology of LED light-curing units (LCUs); (d) the criteria for absorption of photons by photo initiators to initiate free-radical addition polymerisation.ConclusionsThe implications for clinical practice are surveyed. These include design variables and selection criteria for LED-LCUs and guidelines on their use. This is to guide practitioners towards safe and effective light-curing procedures so that they can achieve optimal result for their patients.

Accelerated versus Slow In Vitro Aging Methods and Their Impact on Universal Chromatic, Urethane-Based Composites.

Structural coloring of dental resin-based composites (RBC) is used to create universal chromatic materials designed to meet any aesthetic need, replacing the mixing and matching of multiple shades. The microstructural adjustments to create this desideratum involve nanoscale organic-inorganic core-shell structures with a particular arrangement. The generally higher polymer content associated with these structures compared to universal chromatic RBCs colored by pigments, which in their microstructure come close to regularly shaded RBCs, can influence the way the material ages. Accelerated and slow aging up to 1.2 years of immersion in artificial saliva at 37 °C were therefore compared in relation to their effects on the materials described above and in relation to the immersion conditions prescribed by standards. Quasi-static and viscoelastic parameters were assessed to quantify these effects by a depth-sensing indentation test equipped with a DMA module. The microstructure of the materials was characterized by scanning electron microscopy. The results convincingly show a differentiated influence of the aging protocol on the measured properties, which was more sensitively reflected in the viscoelastic behavior. Accelerated aging, previously associated with the clinical behavior of RBCs, shows a 2- to 10-fold greater effect compared to slow aging in artificial saliva of up to 1.2 years, highly dependent on the microstructure of the material.

3D Printing of CNT- and YSZ-Added Dental Resin-Based Composites by Digital Light Processing and Their Mechanical Properties

This study demonstrates the successful 3D printing of dental resin-based composites (DRCs) containing ceramic particles using the digital light processing (DLP) technique. The mechanical properties and oral rinsing stability of the printed composites were evaluated. DRCs have been extensively studied for restorative and prosthetic dentistry due to their clinical performance and aesthetic quality. They are often subjected to periodic environmental stress, and thus can easily undergo undesirable premature failure. Here, we investigated the effects of two different high-strength and biocompatible ceramic additives, carbon nanotube (CNT) and yttria-stabilized zirconia (YSZ), on the mechanical properties and oral rinsing stabilities of DRCs. Dental resin matrices containing different wt.% of CNT or YSZ were printed using the DLP technique after analyzing the rheological behavior of slurries. Mechanical properties such as Rockwell hardness and flexural strength, as well as the oral rinsing stability of the 3D-printed composites, were systematically investigated. The results indicated that a DRC with 0.5 wt.% YSZ exhibits the highest hardness of 19.8 ± 0.6 HRB and a flexural strength flexural strength of 50.6 ± 6 MPa, as well as reasonable oral rinsing steadiness. This study provides a fundamental perspective for designing advanced dental materials containing biocompatible ceramic particles.

Cytotoxic, Elastic-Plastic and Viscoelastic Behavior of Aged, Modern Resin-Based Dental Composites

The development of resin-based composites (RBCs) is a delicate balance of antagonistic properties with direct clinical implications. The clear trend toward reducing filler size in modern RBCs solves esthetic deficiencies but reduces mechanical properties due to lower filler content and increases susceptibility to degradation due to larger filler-matrix interface. We evaluated a range of nano- and nano-hybrid RBCs, along with materials attempting to address shrinkage stress issues by implementing an Ormocer matrix or pre-polymerized fillers, and materials aiming to provide caries-protective benefit by incorporating bioactive fillers. The cytotoxic response of human gingival fibroblast (HGF) cells after exposure to the RBC eluates, which were collected for up to six months, was analyzed using a WST-1 assay. The microstructural features were characterized using a scanning electron microscopy and were related to the macroscopic and microscopic mechanical behaviors. The elastic-plastic and viscoelastic material behaviors were evaluated at the macroscopic and microscopic levels. The data were supplemented with fractography, Weibull analysis, and aging behavioral analysis. The results indicate that all RBCs are non-cytotoxic at adequate exposure. The amount of inorganic filler affects the elastic modulus, while only to a limited extent the flexural strength, and is well below the theoretical estimates. The nanoparticles and the agglomeration of nanoparticles in the RBCs help generate good mechanical properties and excellent reliability, but they are more prone to deterioration with aging. The pre-polymerized fillers lower the initial mechanical properties but are less sensitive to aging. Only the Ormocer retains its damping ability after aging. The strength and modulus of elasticity on the one hand and the damping capacity on the other are mutually exclusive and indicate the direction in which the RBCs should be further developed.

Development of Thickness-Dependent Predictive Methods for the Estimation of the CIEL*a*b* Color Coordinates of Monolithic and Layered Dental Resin Composites.

Usually, dentin and enamel shades are layered in dental restorations with the purpose of mimicking the natural appearance of teeth. The main objective of this study was to develop and assess accuracy of a color-prediction method for both monolithic and layered dental resin-based composites with varying shades and under different illuminants. A total of 15 different shades of VITAPAN Excell, VITAPAN Dentine and VITA Physiodens as well as VITA Enamel of five different thicknesses (0.5-2.5 mm range) were used to manufacture monolithic and layered samples. A non-contact spectroradiometer with CIE 45∘/0∘ geometry was used to measure the color of all samples over a standard ceramic black background. Second-degree polynomial regression was used as predictive method for CIE-L*a*b* color coordinates. Performance of predictive models was tested using the CIEDE2000 total color difference formula (ΔE00), while accuracy was evaluated by comparative assessment of ΔE00 with corresponding 50:50% acceptability (AT00) and perceptibly (PT00) thresholds for dentistry. A mean color difference between measured (real) and predicted color of ΔE00=1.71, with 62.86% of the color differences below AT00 and 28.57% below PT00, was registered for monolithic samples. For bi-layered samples, the mean color difference was roughly ΔE00=0.50, with generally 100% and more than 85% of the estimations below AT00 and PT00, respectively. The predictive method allowed highly accurate color estimations for both monolithic and layered dental resin-based composites with varying thicknesses and under different illuminations. These results could be useful to maximize the clinical success of dental restorations.

Mechanical and Biomimetic Characteristics of Bulk-Fill Resin Dental Composites Following Exposure in a Simulated Acidic Oral Environment

During the last 10 years, various companies have marketed different "bulk-fill" resin dental composites for the restoration of posterior stress-bearing teeth; however, the impact of acidic conditions on these relatively newer materials has not been thoroughly investigated. Therefore, an attempt was made to evaluate the effect of acidic beverages on the mechanical biomimetic characteristics of four bulk-fill and one conventional nanohybrid resin-based dental composites (RBCs). The specimens of each RBC were stored in two acidic beverages namely 'Orange Juice' and 'Coca-Cola', whereas 'dry' and 'distilled water' storage of specimens served as controls. After 1 week of storage, flexural and surface hardness properties of specimens were determined using a universal testing machine and Vickers hardness tester, respectively. In general, the 'Coca-Cola' beverage caused the greatest degradation of flexural strength, flexural modulus, and surface hardness characteristics in all RBCs in contrast to the 'dry', 'distilled water' controls and 'Orange Juice' storage conditions. However, the overall mechanical biomimetic performance of nanohybrid RBCs was relatively better than all other bulk-fill RBCs and may, therefore, be considered a suitable candidate for the restoration of posterior stress-bearing permanent dentition.

Comparative Evaluation of Contact Angle and Surface Roughness in Resin Based Dental Composites After Polishing – An In Vitro Study

Aim The aim of the present study was to compare and evaluate contact angle and surface roughness of two resin based dental composites with different filler composition after finishing and polishing.Methodology Twenty four composite cylinders measuring 6x2 mm were made using Teflon moulds Group 1 n12 ndash Ivoclar tetric N ceram nanohybrid Group 2 n12 - Ivoclar te Econom plus. Composite surfaces were polished with silicon carbide abrasives and subjected to surface roughness analysis using a stylus profilometer and contact angle measurement using goniometer.Results The surface roughness was significantly higher in Group 2 than the Group 1 Ra and Rq ndash p lt0.001. There was no statistically significant difference in the contact angle values between Group 1 and Group 2 p0.582. Conclusion Finishing and polishing of composites provide better surface characteristics and optimal surface wettability in both nanohybrid and microhybrid composites. Nanohybrid composites were found to have lower surface roughness than microhybrid composites.