Resilin-like Polypeptides Research Articles

Purification and characterization of recombinant human superoxide dismutase integrated with resilin-like polypeptide

Human superoxide dismutase (hSOD1) plays an important role in the aerobic metabolism and free radical eliminating process in the body. However, the production of existing SOD faces problems such as complex purification methods, high costs, and poor product stability. This experiment achieved low-cost, rapid, and simple purification of hSOD1 through ammonium sulfate precipitation method and heat resistance of recombinant protein. We constructed a recombinant protein hSOD1-LR containing a resilin-like polypeptide tag and expressed it. The interest protein was purified by ammonium sulfate precipitation method, and the results showed that the purification effect of 1.5 M (NH4)2SO4 was the best, with an enzyme activity recovery rate of 80 % after purification. Then, based on its thermal stability, further purification of the interest protein at 60 °C revealed a purification fold of up to 24 folds, and the purification effect was similar to that of hSOD1-6xHis purified by nickel column affinity chromatography. The stability of hSOD1-LR showed that the recombinant protein hSOD1-LR has better stability than hSOD-6xHis. hSOD1-LR can maintain 76.57 % activity even after 150 min of reaction at 70 °C. At same time, hSOD1-LR had activity close to 80 % at pH < 5, indicating good acid resistance. In addition, after 28 days of storage at 4 °C and 40 °C, hSOD1-LR retained 92 % and 87 % activity, respectively. Therefore, the method of purifying hSOD1-LR through salt precipitation may have positive implications for the study of SOD purification.

Genetically Fusing Order-Promoting and Thermoresponsive Building Blocks to Design Hybrid Biomaterials.

The unique biophysical and biochemical properties of intrinsically disordered proteins (IDPs) and their recombinant derivatives, intrinsically disordered protein polymers (IDPPs) offer opportunities for producing multistimuli-responsive materials; their sequence-encoded disorder and tendency for phase separation facilitate the development of multifunctional materials. This review highlights the strategies for enhancing the structural diversity of elastin-like polypeptides (ELPs) and resilin-like polypeptides (RLPs), and their self-assembled structures via genetic fusion to ordered motifs such as helical or beta sheet domains. In particular, this review describes approaches that harness the synergistic interplay between order-promoting and thermoresponsive building blocks to design hybrid biomaterials, resulting in well-structured, stimuli-responsive supramolecular materials ordered on the nanoscale.

Genetically Fused Resilin-like Polypeptide-Coiled Coil Bundlemer Conjugates Exhibit Tunable Multistimuli-Responsiveness and Undergo Nanofibrillar Assembly.

Peptide-based materials are diverse candidates for self-assembly into modularly designed and stimuli-responsive nanostructures with precisely tunable compositions. Here, we genetically fused computationally designed coiled coil-forming peptides to the N- and C-termini of compositionally distinct multistimuli-responsive resilin-like polypeptides (RLPs) of various lengths. The successful expression of these hybrid polypeptides in bacterial hosts was confirmed through techniques such as gel electrophoresis, mass spectrometry, and amino acid analysis. Circular dichroism spectroscopy and ultraviolet-visible turbidimetry demonstrated that despite the fusion of disparate structural and responsive units, the coiled coils remained stable in the hybrid polypeptides, and the sequence-encoded differences in thermoresponsive phase separation of the RLPs were preserved. Cryogenic transmission electron microscopy and coarse-grained modeling showed that after thermal annealing in solution, the hybrid polypeptides adopted a closed loop conformation and assembled into nanofibrils capable of further hierarchically organizing into cluster structures and ribbon-like structures mediated by the self-association tendency of the RLPs.

Lipidation alters the phase-separation of resilin-like polypeptides.

Biology exploits biomacromolecular phase separation to form condensates, known as membraneless organelles. Despite significant advancements in deciphering sequence determinants for phase separation, modulating these features in vivo remains challenging. A promising approach inspired by biology is to use post-translational modifications (PTMs)-to modulate the amino acid physicochemistry instead of altering protein sequences-to control the formation and characteristics of condensates. However, despite the identification of more than 300 types of PTMs, the detailed understanding of how they influence the formation and material properties of protein condensates remains incomplete. In this study, we investigated how modification with myristoyl lipid alters the formation and characteristics of the resilin-like polypeptide (RLP) condensates, a prototypical disordered protein with upper critical solution temperature (UCST) phase behaviour. Using turbidimetry, dynamic light scattering, confocal and electron microscopy, we demonstrated that lipidation-in synergy with the sequence of the lipidation site-significantly influences RLPs' thermodynamic propensity for phase separation and their condensate properties. Molecular simulations suggested these effects result from an expanded hydrophobic region created by the interaction between the lipid and lipidation site rather than changes in peptide rigidity. These findings emphasize the role of "sequence context" in modifying the properties of PTMs, suggesting that variations in lipidation sequences could be strategically used to fine-tune the effect of these motifs. Our study advances understanding of lipidation's impact on UCST phase behaviour, relevant to proteins critical in biological processes and diseases, and opens avenues for designing lipidated resilins for biomedical applications like heat-mediated drug elution.

A General and Convenient Peptide Self-Assembling Mechanism for Developing Supramolecular Versatile Nanomaterials Based on The Biosynthetic Hybrid Amyloid-Resilin Protein.

Self-assembling peptides are valuable building blocks to fabricate supramolecular biomaterials, which have broad applications from biomedicine to biotechnology. However, limited choices to induce different globular proteins into hydrogels hinder these designs. Here, an easy-to-implement and tunable self-assembling strategy, which employs Ure2 amyloidogenic peptide, are described to induce any target proteins to assemble into supramolecular hydrogels alone or in combination with notable compositional control. Furthermore, the collective effect of nanoscale interactions among amyloid nanofibrils and partially disordered elastomeric polypeptides are investigated. This led to many useful macroscopic material properties simultaneously emerging from one pure protein material, i.e. strong adhesion to any substrates under wet conditions, rapidly self--assembling into robust and porous hydrogels, adaptation to remodeling processes, strongly promoting cell adhesion, proliferation and differentiation. Moreover, he demonstrated this supramolecular material's robust performance in vitro and vivo for tissue engineering, cosmetic and hemostasis applications and exhibited superior performance compared to corresponding commercial counterparts. To the best of his knowledge, few pure protein-based materials could meet such seemingly mutually exclusive properties simultaneously. Such versatility renders this novel supramolecular nanomaterial as next-generation functional protein-based materials, and he demonstrated the sequence level modulation of structural order and disorder as an untapped principle to design new proteins.

Sequence-Encoded Differences in Phase Separation Enable Formation of Resilin-like Polypeptide-Based Microstructured Hydrogels.

Microstructured hydrogels are promising platforms to mimic structural and compositional heterogeneities of the native extracellular matrix (ECM). The current state-of-the-art soft matter patterning techniques for generating ECM mimics can be limited owing to their reliance on specialized equipment and multiple time- and energy-intensive steps. Here, a photocross-linking methodology that traps various morphologies of phase-separated multicomponent formulations of compositionally distinct resilin-like polypeptides (RLPs) is reported. Turbidimetry and quantitative 1H NMR spectroscopy were utilized to investigate the sequence-dependent liquid-liquid phase separation of multicomponent solutions of RLPs. Differences between the intermolecular interactions of two different photocross-linkable RLPs and a phase-separating templating RLP were exploited for producing microstructured hydrogels with tunable control over pore diameters (ranging from 1.5 to 150 μm) and shear storage moduli (ranging from 0.2 to 5 kPa). The culture of human mesenchymal stem cells demonstrated high viability and attachment on microstructured hydrogels, suggesting their potential for developing customizable platforms for regenerative medicine applications.

Genetic Fusion of Thermoresponsive Polypeptides with UCST-type Behavior Mediates 1D Assembly of Coiled-Coil Bundlemers.

Thermoresponsive resilin-like polypeptides (RLPs) of various lengths were genetically fused to two different computationally designed coiled coil-forming peptides with distinct thermal stability, to develop new strategies to assemble coiled coil peptides via temperature-triggered phase separation of the RLP units. Their successful production in bacterial expression hosts was verified via gel electrophoresis, mass spectrometry, and amino acid analysis. Circular dichroism (CD) spectroscopy, ultraviolet-visible (UV/Vis) turbidimetry, and dynamic light scattering (DLS) measurements confirmed the stability of the coiled coils and showed that the thermosensitive phase behavior of the RLPs was preserved in the genetically fused hybrid polypeptides. Cryogenic-transmission electron microscopy and coarse-grained modeling revealed that functionalizing the coiled coils with thermoresponsive RLPs leads to their thermally triggered noncovalent assembly into nanofibrillar assemblies.

Genetic Fusion of Thermoresponsive Polypeptides with UCST‐type Behavior Mediates 1D Assembly of Coiled‐Coil Bundlemers

AbstractThermoresponsive resilin‐like polypeptides (RLPs) of various lengths were genetically fused to two different computationally designed coiled coil‐forming peptides with distinct thermal stability, to develop new strategies to assemble coiled coil peptides via temperature‐triggered phase separation of the RLP units. Their successful production in bacterial expression hosts was verified via gel electrophoresis, mass spectrometry, and amino acid analysis. Circular dichroism (CD) spectroscopy, ultraviolet‐visible (UV/Vis) turbidimetry, and dynamic light scattering (DLS) measurements confirmed the stability of the coiled coils and showed that the thermosensitive phase behavior of the RLPs was preserved in the genetically fused hybrid polypeptides. Cryogenic‐transmission electron microscopy and coarse‐grained modeling revealed that functionalizing the coiled coils with thermoresponsive RLPs leads to their thermally triggered noncovalent assembly into nanofibrillar assemblies.

Sequence Context and Complex Hofmeister Salt Interactions Dictate Phase Separation Propensity of Resilin-like Polypeptides.

Resilin is an elastic material found in insects with exceptional durability, resilience, and extensibility, making it a promising biomaterial for tissue engineering. The monomeric precursor, pro-resilin, undergoes thermo-responsive self-assembly through liquid-liquid phase separation (LLPS). Understanding the molecular details of this assembly process is critical to developing complex biomaterials. The present study investigates the interplay between the solvent, sequence syntax, structure, and dynamics in promoting LLPS of resilin-like-polypeptides (RLPs) derived from domains 1 and 3 of Drosophila melanogaster pro-resilin. NMR, UV-vis, and microscopy data demonstrate that while kosmotropic salts and low pH promote LLPS, the effects of chaotropic salts with increasing pH are more complex. Subtle variations between the repeating amino acid motifs of resilin domain 1 and domain 3 lead to significantly different salt and pH dependence of LLPS, with domain 3 sequence motifs more strongly favoring phase separation under most conditions. These findings provide new insight into the molecular drivers of RLP phase separation and the complex roles of both RLP sequence and solution composition in fine-tuning assembly conditions.

Tuning the Properties of Protein-Based Polymers Using High-Performance Orthogonal Translation Systems for the Incorporation of Aromatic Non-Canonical Amino Acids.

The incorporation of non-canonical amino acids (ncAAs) using engineered aminoacyl-tRNA synthetases (aaRSs) has emerged as a powerful methodology to expand the chemical repertoire of proteins. However, the low efficiencies of typical aaRS variants limit the incorporation of ncAAs to only one or a few sites within a protein chain, hindering the design of protein-based polymers (PBPs) in which multi-site ncAA incorporation can be used to impart new properties and functions. Here, we determined the substrate specificities of 11 recently developed high-performance aaRS variants and identified those that enable an efficient multi-site incorporation of 15 different aromatic ncAAs. We used these aaRS variants to produce libraries of two temperature-responsive PBPs—elastin- and resilin-like polypeptides (ELPs and RLPs, respectively)—that bear multiple instances of each ncAA. We show that incorporating such aromatic ncAAs into the protein structure of ELPs and RLPs can affect their temperature responsiveness, secondary structure, and self-assembly propensity, yielding new and diverse families of ELPs and RLPs, each from a single DNA template. Finally, using a molecular model, we demonstrate that the temperature-responsive behavior of RLPs is strongly affected by both the hydrophobicity and the size of the unnatural aromatic side-chain. The ability to efficiently incorporate multiple instances of diverse ncAAs alongside the 20 natural amino acids can help to elucidate the effect of ncAA incorporation on these and many other PBPs, with the aim of designing additional precise and chemically diverse polymers with new or improved properties.

Microphase Separation of Resilin-like and Elastin-like Diblock Copolypeptides in Concentrated Solutions.

Diblock copolymers are valued for their ability to form thin films with nanoscale features that typically reflect those of their microphase-separated structures in concentrated solution. Here, we show that such self-assembled structures can be easily formed with diblock copolymers composed of thermally responsive polypeptides, such as resilin-like polypeptides (RLP) and elastin-like polypeptides (ELP), by exploiting the inverse temperature transition behavior of ELPs in aqueous media. Specifically, we examine the self-assembly of a series of RLP-b-ELP diblock copolypeptides in concentrated aqueous solution (30 and 50 wt %) by small-angle X-ray scattering (SAXS). By systematically varying RLP block length and temperature (10-45 °C), we observed microphase separation into hexagonally packed cylinders and lamellae. By analyzing the observed order-order transitions (OOT) and order-disorder transitions (ODT), we determined that self-assembly in this system is primarily driven by polymer-solvent interactions. While these thermally responsive polymers showed clear ODTs and OOTs at certain temperatures, temperature only had a weak effect on the spacing of the resulting nanostructures. In contrast, we found that nanostructure spacing was far more sensitive to RLP block length. Finally, we used atomic force microscopy (AFM) to demonstrate that spin casting RLP-b-ELP diblock copolypeptides also produce nanostructured thin films with spacings that correlate with those in concentrated solution.

Alteration of Microstructure in Biopolymeric Hydrogels via Compositional Modification of Resilin-Like Polypeptides.

Heterogeneities in hydrogel scaffolds are known to impact the performance of cells in cell-laden materials constructs, and we have employed the phase separation of resilin-like polypeptides (RLPs) as a means to generate such materials. Here, we study the compositional features of resilin-like polypeptides (RLPs) that further enable our control of their liquid-liquid phase separation (LLPS) and how such control impacts the formation of microstructured hydrogels. The evaluation of the phase separation of RLPs in solutions of ammonium sulfate offers insights into the sequence-dependent LLPS of the RLP solutions, and atomistic simulations, along with 2D-nuclear Overhauser effect spectroscopy (NOESY) and correlated spectroscopy (COSY) 1H NMR, suggest specific amino acid interactions that may mediate this phase behavior. The acrylamide functionalization of RLPs enables their photo-cross-linking into hydrogels and also enhances the phase separation of the polypeptides. A heating-cooling protocol promotes the formation of stable emulsions that yield different microstructured morphologies with tunable rheological properties. These findings offer approaches for choosing RLP compositions with phase behaviors that can be easily tuned with differences in temperature to control the resulting morphology and mechanical behavior of the heterogeneous hydrogels in regimes useful for biological applications.

Tuning the Hierarchical Structure and Resilience of Resilin-like Polypeptide Hydrogels Using Graphene Oxide.

Resilin-like polypeptides (RLPs) are an important class of intrinsically disordered multistimuli-responsive bioelastomers. The nanostructure of RLPs in solution has been extensively studied in the past few years, from dilute to molecular crowding conditions, and with the addition of rigid biopolymers. Modification of the hierarchical network structure of RLP hydrogels using graphene oxide (GO) as an additive is a burgeoning prospect for their application in the bioelectronic and biomedical fields. In this work, we systemically study the influence of incorporating GO into RLP (Rec1) hydrogels for tuning their physicochemical properties and understanding the gel-cell interactions. The nature of GO interaction with the Rec1 hydrogel is deduced from the change in structure and properties. Contrast-matching small-angle and ultra-small-angle neutron-scattering techniques were used to investigate the network structure of the Rec1 hydrogel and how this structure is modified in the presence of GO. Incorporation of GO in the Rec1 hydrogel matrix results in an increase in the micromechanical resilience, equilibrium water swelling ratio, micropore size, cross-linked domain size; with a decrease in the cross-link density, mass fractal cluster size, local compressive elastic modulus, and cell inert characteristics. These property combinations achieved with the addition of GO further open up the available structure-property design window for RLP applications.

Micromechanical Properties of Microstructured Elastomeric Hydrogels.

Local, micromechanical environment is known to influence cellular function in heterogeneous hydrogels, and knowledge gained in micromechanics will facilitate the improved design of biomaterials for tissue regeneration. In this study, a system comprising microstructured resilin-like polypeptide (RLP)-poly(ethylene glycol) (PEG) hydrogels is utilized. The micromechanical properties of RLP-PEG hydrogels are evaluated with oscillatory shear rheometry, compression dynamic mechanic analysis, small-strain microindentation, and large-strain indentation and puncture over a range of different deformation length scales. The measured elastic moduli are consistent with volume averaging models, indicating that volume fraction, not domain size, plays a dominant role in determining the low strain mechanical response. Large-strain indentation under a confocal microscope enables the visualization of the microstructured hydrogel micromechanical deformation, emphasizing the translation, rotation, and deformation of RLP-rich domains. The fracture initiation energy results demonstrate that failure of the composite hydrogels is controlled by the RLP-rich phase, and their independence with domain size suggested that failure initiation is controlled by multiple domains within the strained volume. This approach and findings provide new quantitative insight into the micromechanical response of soft hydrogel composites and highlight the opportunities in employing these methods to understand the physical origins of mechanical properties of soft synthetic and biological materials.

Covalent co-assembly between resilin-like polypeptide and peptide amphiphile into hydrogels with controlled nanostructure and improved mechanical properties.

Covalent co-assembly holds great promise for the fabrication of hydrogels with controllable nanostructure, versatile chemical composition, and enhanced mechanical properties given its relative simplicity, high efficiency, and bond stability. This report describes our approach to designing functional multicomponent hydrogels based on photo-induced chemical interactions between an acrylamide-functionalized resilin-like polypeptide (RLP) and a peptide amphiphile (PA). Circular dichroism (CD) spectroscopy, electron microscopy, and amplitude sweep rheology were used to demonstrate that the co-assembled hydrogel systems acquired distinct structural conformations, tunable nanostructures, and enhanced elasticity in a PA concentration-dependent manner. We envisage the use of these materials in numerous biomedical applications such as controlled drug release systems, microfluidic devices, and scaffolds for tissue engineering.

Biocompatibility and Viscoelastic Properties of Injectable Resilin-Like Polypeptide and Hyaluronan Hybrid Hydrogels in Rabbit Vocal Folds.

Vocal fold scar, characterized by alterations in the lamina propria extracellular matrix, disrupts normal voice quality and function. Due to a lack of satisfactory clinical treatments, there is a need for tissue engineering strategies to restore voice. Candidate biomaterials for vocal fold tissue engineering must match the unique biomechanical and viscoelastic properties of native tissue without provoking inflammation. We sought to introduce elastomeric properties to hyaluronic acid (HA)-based biomaterials by incorporating resilin-like polypeptide (RLP) into hybrid hydrogels. Physically crosslinked RLP/HA and chemically crosslinked RLP-acrylamide/thiolated HA (RLP-AM/HA-SH) hydrogels were fabricated using cytocompatible chemistries. Mechanical properties of hydrogels were assessed in vitro using oscillatory rheology. Hybrid hydrogels were injected into rabbit vocal folds and tissues were assessed using rheology and histology. A small number of animals underwent acute vocal fold injury followed by injection of RLP-AM/HA-SH hydrogel alone or as a carrier for human bone marrow mesenchymal stem cells (BM-MSCs). Rheological testing confirmed that mechanical properties of materials in vitro resembled native vocal fold tissue and that viscoelasticity of vocal fold mucosa was preserved days 5 and 21 after injection. Histological analysis revealed that hybrid hydrogels provoked only mild inflammation in vocal fold lamina propria with demonstrated safety in the airway for up to 3 weeks, confirming acute biocompatibility of crosslinking chemistries. After acute injury, RLP-AM/HA-SH gel with and without BM-MSCs did not result in adverse effects or increased inflammation. Collectively, results indicate that RLP and HA-based hybrid hydrogels are highly promising for engineering the vocal fold lamina propria.

Microstructured Elastomer-PEG Hydrogels via Kinetic Capture of Aqueous Liquid-Liquid Phase Separation.

Heterogeneous hydrogels with desired matrix complexity are studied for a variety of biomimetic materials. Despite the range of such microstructured materials described, few methods permit independent control over microstructure and microscale mechanics by precisely controlled, single‐step processing methods. Here, a phototriggered crosslinking methodology that traps microstructures in liquid–liquid phase‐separated solutions of a highly elastomeric resilin‐like polypeptide (RLP) and poly(ethylene glycol) (PEG) is reported. RLP‐rich domains of various diameters can be trapped in a PEG continuous phase, with the kinetics of domain maturation dependent on the degree of acrylation. The chemical composition of both hydrogel phases over time is assessed via in situ hyperspectral coherent Raman microscopy, with equilibrium concentrations consistent with the compositions derived from NMR‐measured coexistence curves. Atomic force microscopy reveals that the local mechanical properties of the two phases evolve over time, even as the bulk modulus of the material remains constant, showing that the strategy permits control of mechanical properties on micrometer length scales, of relevance in generating mechanically robust materials for a range of applications. As one example, the successful encapsulation, localization, and survival of primary cells are demonstrated and suggest the potential application of phase‐separated RLP‐PEG hydrogels in regenerative medicine applications.

Micellar Self-Assembly of Recombinant Resilin-/Elastin-Like Block Copolypeptides.

Reported here is the synthesis of perfectly sequence defined, monodisperse diblock copolypeptides of hydrophilic elastin-like and hydrophobic resilin-like polypeptide blocks and characterization of their self-assembly as a function of structural parameters by light scattering, cryo-TEM, and small-angle neutron scattering. A subset of these diblock copolypeptides exhibit lower critical solution temperature and upper critical solution temperature phase behavior and self-assemble into spherical or cylindrical micelles. Their morphologies are dictated by their chain length, degree of hydrophilicity, and hydrophilic weight fraction of the ELP block. We find that (1) independent of the length of the corona-forming ELP block there is a minimum threshold in the length of the RLP block below which self-assembly does not occur, but that once that threshold is crossed, (2) the RLP block length is a unique molecular parameter to independently tune self-assembly and (3) increasing the hydrophobicity of the corona-forming ELP drives a transition from spherical to cylindrical morphology. Unlike the self-assembly of purely ELP-based block copolymers, the self-assembly of RLP-ELPs can be understood by simple principles of polymer physics relating hydrophilic weight fraction and polymer-polymer and polymer-solvent interactions to micellar morphology, which is important as it provides a route for the de novo design of desired nanoscale morphologies from first principles.

Rational Design and Hierarchical Assembly of a Genetically Engineered Resilin-Silk Copolymer Results in Stiff Hydrogels.

Genetically engineered protein polymers, which can combine different unique peptide sequences from natural protein materials, offer great opportunities for making advanced materials with well-defined structures and properties. Here we report for the first time biosynthesis and self-assembly of a recombinant resilin-silk (RS) copolymer consisting of repeating units of silk and resilin blocks. The copolymer in aqueous solution self-assembled into nanoparticles, and the assembled nanoparticles further form nano- to microscale fibers in a time-dependent manner at body temperature, whereas such fibers were not formed upon incubation of the copolymer at either low or high temperatures. In contrast, a resilin-like polypeptide without the silk blocks exhibited a typical thermoresponsive dual-phase transition behavior and was incapable of self-assembling into fibers. More interestingly, the microscale fibers self-assembled from a moderately concentrated RS solution (20 wt %) could interact to give a self-supporting, semitransparent hydrogel with elastic modulus at approximately 195 Pa. Furthermore, photo-cross-linking of either freshly prepared or annealed RS copolymer led to the formation of stiff hydrogels and the material mechanical property was superior upon annealing of the RS solution for a longer time up to 4 h, with elastic modulus ranging from 2.9 to 7.0 kPa. These results not only shed light on the fundamental hierarchical assembly mechanism of a new family of genetically engineered RS copolymer but also suggest future opportunities for these thermoresponsive polymers in fabrication of hydrogel materials with tunable mechanical properties for diverse applications.

Elastic and pH-Responsive Hybrid Interfaces Created with Engineered Resilin and Nanocellulose.

We investigated how a genetically engineered resilin fusion protein modifies cellulose surfaces. We characterized the pH-responsive behavior of a resilin-like polypeptide (RLP) having terminal cellulose binding modules (CBM) and showed its binding to cellulose nanofibrils (CNF). Characterization of the resilin fusion protein at different pHs revealed substantial conformational changes of the protein, which were observed as swelling and contraction of the protein layer bound to the nanocellulose surface. In addition, we showed that employment of the modified resilin in cellulose hydrogel and nanopaper increased their modulus of stiffness through a cross-linking effect.