Residual Thiol Groups Research Articles

Cross-linked polysiloxane-coated stable bond O-9-(2,6-diisopropylphenylcarbamoyl)quinine and quinidine chiral stationary phases as well as application in enantioselective cryo-HPLC.

In this work, brush-type chiral stationary phases (CSPs) with O-9-(2,6-diisopropylphenylcarbamoyl)-modified quinidine (DIPPCQD-brush/-SH) and O-9-(2,6-diisopropylphenylcarbamoyl)-modified quinine (DIPPCQN-brush/-SH) were prepared as benchmarks for comparison with new corresponding polymeric CSPs with more stable bonding chemistry. These polymeric CSPs were prepared by coating a thin poly(3-mercaptopropyl)-methylsiloxane film together with the chiral selector onto vinyl-modified silica. In a second step, immobilization of the quinine/quinidine derivatives as well as cross-linking of the polysiloxane film to the vinyl-silica is achieved by a double thiol-ene click reaction. The polymeric CSPs exhibited similar enantioselectivity as the corresponding brush phases, but showed lower chromatographic efficiencies. Chiral acidic substances were separated into enantiomers (e.g., N-protected amino acids, herbicides like dichlorprop) in accordance with an enantioselective anion-exchange process. Oxidation of residual thiol groups of the polymer DIPPCQN-CSP introduced sulfonic acid co-ligands on the silica surface, which resulted in greatly reduced retention times. Acting as immobilized counterions, they allowed to reduce the concentration of counterions in the mobile phase, which is favorable for liquid chromatography (LC)-electrospray ionization-mass spectrometry application. Ibuprofen showed a single peak under ambient column temperature. However, application of cryogenic cooling of the column enabled to achieve baseline separation at -20°C column temperature. It can be explained by an enthalpically dominated separation, which leads to an increase in separation factors when the temperature is reduced. While it is quite uncommon to work at subzero degree column temperature, this work illustrates the potential to exploit such temperature regime for optimization of LC enantiomer separations.

In situ gelation of thiolated poly(aspartic acid) derivatives through oxidant-free disulfide formation for ophthalmic drug delivery

Efficient topical treatment of ocular diseases requires a prolonged residence time of drug formulations. An in situ gelling, mucoadhesive system can provide improved residence time while keeps the installation of the formulation easy and accurate due to its low initial viscosity. We synthesized a two-component, biocompatible water-based liquid formulation showing in situ gelation upon mixing. S-protected, preactivated derivatives of thiolated poly(aspartic acid) (PASP-SS-MNA) were synthesized by coupling the free thiol groups of thiolated poly(aspartic acid) (PASP-SH) with 6-mercaptonicotinic acid (MNA). The amount of protecting groups was 242, 341, and 530 µmol/g depending on the degree of thiolation of PASP. The chemical interaction between PASP-SS-MNA and mucin was proven, indicating the mucoadhesive properties. Disulfide cross-linked hydrogels were formed in situ without an oxidizing agent by mixing the aqueous solutions of PASP-SS-MNA and PASP-SH. The gelation time was controlled between 1 and 6 min, while the storage modulus was as high as 4–16 kPa depending on the composition. Swelling experiments showed that hydrogels with no residual thiol groups are stable in phosphate-buffered saline at pH = 7.4. In contrast, the presence of free thiol groups leads to the dissolution of the hydrogel with a rate depending on the excess of thiol groups. The biological safety of the polymers and MNA was confirmed on Madin-Darby Canine Kidney cell line. Furthermore, a prolonged release of ofloxacin was observed at pH = 7.4 compared to a conventional liquid formulation, supporting the potential of the developed biopolymers in ophthalmic drug delivery.

Photoresponsive Emulsion-Templated Porous Materials via Orthogonal Photoclick Chemistry.

The functionalization of emulsion-templated porous polymers (polyHIPEs) utilizing modern and efficient chemistries is an important avenue for tailoring the properties of these scaffolds for specific and specialized applications. Herein, tetrazole photoclick chemistry is utilized for the efficient functionalization of polyHIPEs synthesized from various monomer systems and polymerization chemistries. Using both radical polymerization and thiol-ene polymerization, polyHIPEs with well-defined, interconnected open-cell morphologies are synthesized with tetrazole concentrations ranging from 0 to 5 w/v %, with the pore diameters ranging from 3 to 24 μm. Analyzed by fluorescence spectroscopy, FTIR spectroscopy, and confocal microscopy, spatially controlled functionalization to generate photopatterned fluorescent polyHIPEs is demonstrated via the reaction with residual acrylate and thiol groups. In addition, the scaffolds can be readily functionalized with external dipolarophiles such as acrylates to incorporate a functionality onto the polyHIPE surface. With many functional tetrazoles also reported in the literature, a PEG-tetrazole is also used to explore the photoinduced functionalization of polyHIPEs possessing tunable ratios of thiol and acrylate groups, and the effect on fluorescence, wettability, and biocompatibility is analyzed. Overall, the reaction is shown to be a broadly applicable tool for polyHIPE functionalization with many avenues for further development toward specific applications.

Step-growth production of nanogels for use as macromers with dimethacrylate monomers

A series of functional nanogels were synthesized by a step-growth mechanism that involved diisocyanate addition to a modest stoichiometric excess of multi-thiols. Nanogels with sizes <10 nm were obtained as room temperature liquids with residual thiol groups used to attach methacrylate functionality. Depending on nanogel structure, bulk nanogel properties varied widely, as did the properties of the nanogel-derived and nanogel-modified polymers. Photopolymerization of the reactive nanogels in combination with a dimethacrylate monomer showed dramatically enhanced reaction rate and conversion compared with the dimethacrylate homopolymer. Polymerization shrinkage/ stress as well as mechanical properties of the polymer networks were controlled by changing the ratio of nanogels and dimethacrylate monomers used in formulations. Thus, this study shows the potential of step-growth nanogels for beneficial changes in resin reactivity and application-based performance.

Zwitterionic codeine-derived methacrylate monoliths for enantioselective capillary electrochromatography of chiral acids and chiral bases.

Thiol-ene click reaction of N-acetyl-L-cysteine methyl ester to codeine, followed by reaction with allyl isocyanate and hydrolysis to the corresponding zwitterionic chiral selector and its subsequent bonding to the surface of a methacrylate monolith provided a new chiral capillary column for enantiomer separation of chiral acids and chiral bases. First, the epoxy groups of a poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith were converted into amine residues, followed by reaction with allylglycidyl ether. In this way, a spacer arm was bonded to the surface before coating and cross-linking poly(3-mercaptopropyl methylsiloxane) (PMPMS) via radical addition (thiol-ene click reaction) to the surface. In order to improve the performance of the monolithic chiral stationary phase, thio ether and residual thiol groups were oxidized to sulfonyl and sulphonate groups, respectively. This novel chiral stationary phase (CSP) was evaluated by capillary electrochromatography (CEC) using two chiral model compounds, namely N-3,5-dinitrobenzoyl-R,S-leucine (retained by anion-exchange mechanism) and mefloquine (by cation-exchange process). The ion-exchange retention mechanism on the CSP was characterized for these two counterionic model solutes by varying the mobile phase composition, including the nature of solvents, the concentration of counter-ions and co-ions, and the acid-to-base ratio. A series of chiral β-blockers and amino acid derivatives was used to further check the performance of the modified monolith under the optimal conditions. Several enantiomers were baseline resolved with reasonable peak efficiencies (up to 60,000 theoretical plates per meter for the second eluted enantiomer).

Oxidative photopolymerization of thiol-terminated polysulfide resins. Application in antibacterial coatings

A UV photoinduced cross-linking of non-modified commercial poly(disulfide) resins (Thioplast) is reported via the air oxidative photocoupling of terminal thiol functions. Catalyzed by a photogenerated guanidine base (TBD), this step-growth photopolymerization is useful to maximize disulfide functions content. The mechanism proceeds through thiol deprotonation into thiolate anions, further oxidized into thiyl radicals, eventually dimerizing into disulfide cross-links. Starting with a detailed structural characterization of the thiol-terminated resin, photooxidative kinetics are studied under exposure to a polychromatic medium-pressure Hg arc using Raman and infrared spectroscopy. The effects of irradiance, film thickness, photobase concentration, resin molar mass, and content of an additional polythiol monomer (reactive diluent) have been investigated. In an effort of upscaling, irradiation under a 365 nm LED panel has enabled the fast preparation of 1.5 μm thick cross-linked poly(disulfide) coatings in a matter of minutes. Capitalizing on the ability of residual thiol groups to react with silver cations, a post-functionalization has been successfully performed, leading to films exhibiting at their surface stable thiolate-silver bonds as proved by X-ray photoelectron spectroscopy. Despite the well-established biocide action of silver ions, no antibacterial action has been evidenced by confocal fluorescence microscopy because of insufficient release.

Embedding Well-Defined Responsive Hydrogels with Nanocontainers: Tunable Materials from Telechelic Polymers and Cyclodextrins.

Design, synthesis, and application of cyclodextrin (CD) containing thermoresponsive hydrogels fabricated from thiol-reactive telechelic polymers are reported. Hydrophilic polymers containing 2-hydroxyethyl methacrylate and/or di(ethylene glycol)methylether methacrylate monomers as side chains and thiol-reactive groups at chain ends were synthesized. A series of hydrogels was fabricated using thiol–ene conjugation of these thiol-reactive polymers with multivalent thiol-containing CDs as crosslinkers. Clear and transparent hydrogels were obtained with good conversion (79–89%) by utilizing the “nucleophilic” and “radical” thiol–ene “click” reactions. Analysis of the amount of residual thiol groups in these hydrogels using Ellman’s reagent suggested that gels with a moderately well-defined network structure were obtained. Hydrogels fabricated using different telechelic polymers were examined for their properties such as morphology, equilibrium water uptake, and rheological characteristics. Cytocompatibility of these hydrogels was ascertained by a cell viability assay that demonstrated low toxicity toward fibroblast cells. Thereafter, the CD-containing hydrogels were evaluated for the loading and controlled release of puerarin, an antiglaucoma drug. Utilization of thermoresponsive polymers as the matrix for these hydrogels allows use of temperature as a stimulus to modulate the drug release. A slower and more sustained drug release was observed at physiological temperatures compared to ambient conditions. The effect of temperature on the elasticity of the hydrogel was investigated rheologically to demonstrate that the collapse of the network structure occurs near physiological temperatures. The increased hydrophobicity and compactness of the gel matrix at higher temperatures results in a slower drug release. The strategy employed here demonstrates that tuning the matrix composition of hydrogels with well-defined network structures through appropriate choice of responsive copolymers allows design of materials with control of their physical properties and drug-release behavior.

Surface-anchored counterions on weak chiral anion-exchangers accelerate separations and improve their compatibility for mass-spectrometry-hyphenation

In the present work we propose new variants of chiral stationary phases (CSP) with tert-butylcarbamoylquinine (tBuCQN) as chiral selector molecule. Four tBuCQN-CSPs with distinct bonding chemistries are compared in terms of their pH-dependent surface charge by ζ-potential determinations, by achiral and chiral liquid chromatographic tests and LC–ESI–MS hyphenation. In one embodiment tBuCQN was immobilized on 3-mercaptopropylmethylsilyl-modified silica by thiol-ene click reaction (brush type CSP with selector coverage of 0.38mmol/g). In another embodiment, poly-(3-mercaptopropyl)-methylsiloxane was coated onto vinylized silica particles in presence of tBuCQN and radical initiator. The tBuCQN selector was then immobilized onto the polysiloxane film which in turn was crosslinked to the vinyl-surface in a simultaneous double click reaction leading to a CSP with enhanced stability due to multiple linkages (0.29mmol/g tBuCQN). Aliquots of each of the two CSPs were further modified by oxidation of free residual thiol groups to sulfonic acid functionalities to obtain strongly acidic endcapping groups which act as immobilized counterions of the chiral WAX CSPs (0.2mmol/g sulfonic acid co-ligands for brush type CSP). This caused secondary repulsive interactions, hence balanced interactions of the target analytes (chiral acids) at the WAX site and decreased non-specific interactions. Furthermore, this rendered possible the use of milder elution conditions, i.e. lower ionic strength, for acidic compounds. Separation performance was maintained and slightly improved, respectively, when using polar organic or reversed-phase type elution mode in chiral separations which were significantly accelerated (isoeluotropic conditions could be achieved with ca. factor 40 lower counterion concentration in the mobile phase). Thus, LC–ESI–MS enantiomer separations could be readily performed at very low ionic strength conditions (10mM acetate) which is favorable due to less ion suppression. In addition to this the newly developed stationary phases showed complementary retention profiles in RP- and HILIC-mode which make these type of stationary phases also promising tools for achiral applications in pharmaceutical analysis, especially as orthogonal separation principle e.g. in 2D-LC and impurity profiling.

"Clickable" Nanogels via Thermally Driven Self-Assembly of Polymers: Facile Access to Targeted Imaging Platforms using Thiol-Maleimide Conjugation.

Multifunctionalizable nanogels are fabricated using thermally driven self-assembly and cross-linking of reactive thermoresponsive copolymers. Nanogels thus fabricated can be easily conjugated with various appropriately functionalized small molecules and/or ligands to tailor them for various applications in delivery and imaging. In this study, a poly(ethylene glycol)-methacrylate-based maleimide-bearing copolymer was cross-linked with a dithiol-based cross-linker to synthesize nanogels. Because of lower critical solution temperature (LCST) around 55 °C in aqueous media, these copolymers assemble into nanosized aggregates when heated to this temperature, and they are cross-linked using the thiol-maleimide conjugation. Nanogels thus fabricated contain both thiol and maleimide groups in the same cross-linked nanogels. Postgelation functionalization of the residual maleimide and thiol groups is demonstrated through conjugation of a thiol-bearing hydrophobic dye (BODIPY-SH) and N-(fluoresceinyl) maleimide, respectively. In addition, to demonstrate the utility of multifunctionality of these nanogels, a thiol-bearing cyclic-peptide-based targeting group, cRGDfC, and N-(fluoresceinyl)-maleimide-based fluorescent tag was conjugated to nanogels in aqueous media. Upon treatment with breast cancer cell lines, MDA-MB-231, it was deduced from cellular internalization studies using fluorescence microscopy and flow cytometry that the peptide carrying constructs were preferentially internalized. Overall, a facile synthesis of multifunctionalizable nanogels that can be tailored using effective conjugation chemistry under mild conditions can serve as promising candidates for various applications.

Multireactive Poly(2-oxazoline) Nanofibers through Electrospinning with Crosslinking on the Fly.

Crosslinked hydrophilic poly(2-oxazoline)-based nanofibers amenable to facile multifunctionalization are fabricated using alkene-containing poly(2-alkyl-2-oxazoline)s (PAOx) via in situ photoinitiated radical thiol-ene crosslinking during electrospinning. The resulting crosslinked nanofibers are demonstrated to be multifunctionalizable using different chemistries as they contain two functional handles, being the alkene moieties from the parent copolymer and the residual thiol groups from the tetra-thiol-based crosslinker. While the thiol groups in these nanofibers could be passivated or conjugated to install functional molecules through thiol-maleimide conjugation, the alkene groups could sequentially be modified with thiol-containing molecules using photoinitiated radical thiol-ene reactions. Utilization of the photochemically induced conjugation of thiol-bearing molecules to the alkene groups on the nanofibers is used to obtain functionalization in a spatially controlled manner.

Smart photoluminescent nanohybrids based on CdSe quantum dots capped with multidentate thiolated pH‐responsive and thermoresponsive polymers for nanosensing

ABSTRACTWell‐defined thermoresponsive polymers obtained by the atom transfer radical polymerization (ATRP) of short oligo(ethylene glycol) methyl ether methacrylates (MEOnMA, n = 2, 3, or 8) with small ratios of a thiolated comonomer, 2‐(acetylthio)ethylmethacrytale, can replace the hydrophobic trioctylphosphine oxide (TOPO) capping of CdSe quantum dots (QDs). After this facile ligand exchange, the mild hydrolysis of the acetylthiol group into thiol is the key to enhance the QD luminescence. However, the length of the ethylene glycol side chain is critical for the success of the functionalization; it is established that the shortest MEO2MA‐based copolymers result in a compact coating and a highest quantum yield (up to a factor of 6) when compared with that of CdSe@TOPO in dichloromethane. In addition, the amphiphilic character of the copolymer allows the CdSe@P(MEOnMA‐co‐SEMA) nanohybrids to disperse in water. On the other hand, the residual ionizable thiol groups do not get attached to the QD surface, cause that the lower critical solubility temperature of the polymer depends on pH as well. Thus, at acidic pH, an abrupt increase in the luminescence emission accompanies the polymer collapse, which establishes the promise of these hybrids as temperature/pH nanosensors and targeted drug delivery. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014, 52, 3087–3095

Shaped platinum nanoparticles directly synthesized inside mesoporous silica supports.

It is difficult to deposit shape-controlled nanoparticles into a mesoporous framework while preserving the shape. For shaped platinum nanoparticles, which are typically 5-10 nm in size, capillary inclusion by sonication or the formation of a mesoporous framework around the shaped platinum nanoparticles has been attempted, but the nanoparticles aggregated or their shapes were degraded easily. In this work, we directly nucleated platinum on the surface inside a mesoporous silica support and controlled the overgrowth step, producing cubic shaped nanoparticles. Mercaptopropyltrimethoxysilane was used as an anchoring agent causing nucleation at the silica surface, and it also helped to shape the nanoparticles. Platinum nanocubes, which were synthesized with polymeric capping agents separately, were deposited inside the mesoporous silica by sonication, but most of the nanoparticles were clogged at the entrance to the pores, and the surface of the platinum had very few sites that were catalytically active, as evidenced by the small H2 uptake. Unshaped platinum nanoparticles, which were prepared by conventional wet impregnation, showed a similar amount of H2 uptake as the in situ shaped platinum cubes, but the selectivity for pyrrole hydrogenation was poorer towards the production of pyrrolidine. The mesoporosity and the residual thiol groups on the surface of the in situ shaped Pt nanocubes might cause a high selectivity for pyrrolidine.

Synthesis of amphiphilic heteroarm star‐shaped polymer via free radical polymerization using polyfunctional chain transfer agent and its self‐assembly behavior

AbstractAmphiphilic heteroarm star‐shaped polymers have important theoretical and practical significance. In this work, amphiphilic heteroarm star‐shaped polymer was synthesized by the use of polyfunctional chain transfer agent via sequential free radical polymerization in two steps. First, conventional free radical polymerization of methyl methacrylate (MMA) initiated by 2,2′‐azobis (isobutyronitrile) (AIBN) was carried out in the presence of polyfunctional chain transfer agent, pentaerythritol‐tertrakis (3‐mercaptopropinate) (PETMP). At appropriate monomer conversion, about two‐arm s‐PMMA having two residual thiol groups at the chain center was obtained. Second, the s‐PMMA obtained above was used as macro‐chain‐transfer agent for free radical polymerization of acrylic acid (AA). The heteroarm star‐shaped polymer with the hydrophobic PMMA segment and the hydrophilic PAA segment was obtained. The successful synthesis of heteroarm star‐shaped polymers, (PMMA)2(AA)2, was confirmed by 1H‐NMR and its self‐assembly behavior in different solvents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013

Response to comment on “The interaction of cells and bacteria with surfaces structures at the nanoscale”

A UV photoinduced cross-linking of non-modified commercial poly(disulfide) resins (Thioplast) is reported via the air oxidative photocoupling of terminal thiol functions. Catalyzed by a photogenerated guanidine base (TBD), this step-growth photopolymerization is useful to maximize disulfide functions content. The mechanism proceeds through thiol deprotonation into thiolate anions, further oxidized into thiyl radicals, eventually dimerizing into disulfide cross-links. Starting with a detailed structural characterization of the thiol-terminated resin, photooxidative kinetics are studied under exposure to a polychromatic medium-pressure Hg arc using Raman and infrared spectroscopy. The effects of irradiance, film thickness, photobase concentration, resin molar mass, and content of an additional polythiol monomer (reactive diluent) have been investigated. In an effort of upscaling, irradiation under a 365 nm LED panel has enabled the fast preparation of 1.5 μm thick cross-linked poly(disulfide) coatings in a matter of minutes. Capitalizing on the ability of residual thiol groups to react with silver cations, a post-functionalization has been successfully performed, leading to films exhibiting at their surface stable thiolate-silver bonds as proved by X-ray photoelectron spectroscopy. Despite the well-established biocide action of silver ions, no antibacterial action has been evidenced by confocal fluorescence microscopy because of insufficient release.

Solvent dependent morphologies in thiol-ene photopolymerization: A facile route to the synthesis of resorcinarene nanocapsules

This article describes a direct method for the fabrication of resorcinarene nanocapsules by photopolymerization of resorcinarene tetraalkene tetrathiol, in the absence of any template or preorganization. Further, by varying the polymerization media, a variety of other polymeric architectures like lattices, fibrous networks, and nanoparticles were obtained. The morphology and structure were characterized by transmission electron microscopy, energy dispersive spectroscopy, scanning electron microscopy, dynamic light scattering, infrared and nuclear magnetic resonance spectroscopy. These morphologically distinct resorcinarene polymeric architectures contain residual thiol and ene functional groups offering potential functionalization opportunities.

SYNTHESIS OF HETEROARM STAR-SHAPED POLYMER BY THE USE OF POLYFUNCTIONAL CHAIN-TRANSFER AGENT via CONVENTIONAL FREE RADICAL POLYMERIZATION

Heteroarm star-shaped polymers were synthesized by conventional free radical polymerization in two steps by the use of polyfunctional chain transfer agent. In the first step, free radical polymerization of methyl methacrylate was carried out in the presence of a polyfunctional chain transfer agent, pentaerythritol tetrakis(3-mercaptopropinate). At appropriate monomer conversions, two-arm PMMA having two residual thiol groups at the chain center or three-arm PMMA having one residual thiol group at the core were obtained. In the second step, free radical polymerization of styrene was carried out using PMMAs obtained above as macro-chain transfer agent. When styrene conversion was lower than 30%, heteroarm star-shaped polymers, (PMMA)2(PS)2 and (PMMA)3(PS), were obtained successfully.

Investigations on the chromatographic behavior of hybrid reversed-phase materials containing electron donor–acceptor systems: I. Contribution of sulfur–aromatic interactions

The influence of sulfur–aromatic interactions on the chromatographic separation behavior of hybrid RP phases, containing thiol-groups and/or embedded sulfide-groups (S-RP) has been investigated. To allow a precise outline of this new interaction mode, a wide variety of S-RP phases with different alkyl chain length, with and without residual thiol-groups and silanol-endcapping were prepared and tested in comparison to some conventional monomerical as well as polymerical n-alkyl type RP phases. The solute test sets employed in this study comprised the classical chromatographic column tests from Engelhardt and Tanaka as well as test assemblies containing polycyclic aromatic hydrocarbons, stilbene-based cis/ trans isomers and functional isomers of benzene. In general, a pronounced strong planar recognition ability as well as a strong increase in the retention for aromatic compounds have been noticed. It was furthermore found that not only the sulfur atom incorporated into the alkyl chain, but also the residual thiol-groups of the 3-propylthiol silica backbone contribute to the overall retention behavior of these novel S-RP type phases.

Enhancement of lysosomal proton permeability induced by photooxidation of membrane thiol groups

Effects of photooxidation of membrane thiol groups on lysosomal proton permeability were studied by measuring intralysosomal pH with fluorescein isothiocyanate–dextran and monitoring proton leakage with p-nitrophenol. Methylene blue-mediated photooxidation of lysosomes decreased their membrane thiol groups and produced cross-linking of the membrane proteins, which was established by the measurement of residual membrane thiol groups with 5,5 ′-dithio-bis(2-nitrobenzoic acid) and sodium dodecyl sulfate–polyacrylamide gel electrophoresis, respectively. The cross-linking of proteins could be abolished by subsequent treatment of the photodamaged lysosomes with dithiothreitol, indicating that the proteins were linked via disulfide bonds. In addition, the photodamage of lysosomes raised the intralysosomal pH and caused leakage of the lysosomal protons, which could also be reversed by subsequent dithiothreitol treatment. This indicates that lysosomal proton permeability can be increased by photooxidation of the membrane thiol groups and recovered to the normal level by reduction of the groups.

The influence of oxidation of membrane thiol groups on lysosomal proton permeability.

The influence of oxidation of membrane thiol groups on lysosomal proton permeability was studied by measuring lysosomal pH with FITC-conjugated dextran, determining the membrane potential with 3,3'-dipropylthiadicarbocyanine iodide and monitoring their proton leakage with p-nitrophenol. Residual membrane thiol groups were measured with 5,5'-dithiobis-(2-nitrobenzoic acid). The lysosomal membrane thiol groups were modified by treatment with diamide and dithiothreitol. SDS/PAGE revealed aggregations of the membrane proteins induced by the treatment of lysosomes with diamide. The cross-linkage of proteins could be abolished by subsequent treatment with dithiothreitol, indicating that the proteins were linked via disulphide bonds. Treating the lysosomes with diamide decreased their membrane thiol groups and caused increases in lysosomal pH, membrane potential and proton leakage, which could be reversed by treatment of the lysosomes with dithiothreitol. This indicates that the lysosomal proton permeability can be increased by oxidation of the membrane thiol groups and restored to the normal level by reduction of the groups. Treatment of the lysosomes with N-ethylmaleimide reduced their membrane thiol groups but did not change the lysosomal pH or their degree of proton leakage. It suggests that protein aggregation may be an important mechanism for the increase in lysosomal proton permeability. The results raise the possibility that the proton permeability of lysosomes in vivo may be affected by the redox states of their membrane thiol groups.

The influence of oxidation of membrane thiol groups on lysosomal proton permeability

The influence of oxidation of membrane thiol groups on lysosomal proton permeability was studied by measuring lysosomal pH with FITC-conjugated dextran, determining the membrane potential with 3,3′-dipropylthiadicarbocyanine iodide and monitoring their proton leakage with p-nitrophenol. Residual membrane thiol groups were measured with 5,5′-dithiobis-(2-nitrobenzoic acid). The lysosomal membrane thiol groups were modified by treatment with diamide and dithiothreitol. SDS/PAGE revealed aggregations of the membrane proteins induced by the treatment of lysosomes with diamide. The cross-linkage of proteins could be abolished by subsequent treatment with dithiothreitol, indicating that the proteins were linked via disulphide bonds. Treating the lysosomes with diamide decreased their membrane thiol groups and caused increases in lysosomal pH, membrane potential and proton leakage, which could be reversed by treatment of the lysosomes with dithiothreitol. This indicates that the lysosomal proton permeability can be increased by oxidation of the membrane thiol groups and restored to the normal level by reduction of the groups. Treatment of the lysosomes with N-ethylmaleimide reduced their membrane thiol groups but did not change the lysosomal pH or their degree of proton leakage. It suggests that protein aggregation may be an important mechanism for the increase in lysosomal proton permeability. The results raise the possibility that the proton permeability of lysosomes in vivo may be affected by the redox states of their membrane thiol groups.