Analysis Of Residual Dipolar Couplings Research Articles

Exploring the impact of alignment media on RDC analysis of phosphorus-containing compounds: a molecular docking approach.

Residual dipolar couplings (RDCs) are employed in NMR analysis when conventional methods, such as J-couplings and nuclear Overhauser effects (NOEs) fail. Low-energy (optimized) conformers are often used as input structures in RDC analysis programs. However, these low-energy structures do not necessarily resemble conformations found in anisotropic environments due to interactions with the alignment medium, especially if the analyte molecules are flexible. Considering interactions with alignment media in RDC analysis, we developed and evaluated a molecular docking-based approach to generate more accurate conformer ensembles for compounds in the presence of the poly-γ-benzyl-L-glutamate alignment medium. We designed chiral phosphorus-containing compounds that enabled us to utilize 31P NMR parameters for the stereochemical analysis. Using P3D/PALES software to evaluate diastereomer discrimination, we found that our conformer ensembles outperform moderately the standard, low-energy conformers in RDC analysis. To further improve our results, we (i) averaged the experimental values of the molecular docking-based conformers by applying the Boltzmann distribution and (ii) optimized the structures through normal mode relaxation, thereby enhancing the Pearson correlation factor R and even diastereomer discrimination in some cases. Nevertheless, we presume that significant differences between J-couplings in isotropic and in anisotropic environments may preclude RDC measurements for flexible molecules. Therefore, generating conformer ensembles based on molecular docking enhances RDC analysis for mildly flexible systems while flexible molecules may require applying more advanced approaches, in particular approaches including dynamical effects.

Enantiodiscrimination of Inherently Chiral Thiacalixarenes by Residual Dipolar Couplings.

Inherently chiral compounds, such as calixarenes, are chiral due to a nonplanar three-dimensional (3D) structure. Determining their conformation is essential to understand their properties, with nuclear magnetic resonance (NMR) spectroscopy being one applicable method. Using alignment media to measure residual dipolar couplings (RDCs) to obtain structural information is advantageous when classical NMR parameters like the nuclear Overhauser effect (NOE) or J-couplings fail. Besides providing more accurate structural information, the alignment media can induce different orientations of enantiomers. In this study, we examined the ability of polyglutamates with different side-chain moieties─poly-γ-benzyl-l-glutamate (PBLG) and poly-γ-p-biphenylmethyl-l-glutamate (PBPMLG) ─to enantiodifferentiate the inherently chiral phenoxathiin-based thiacalix[4]arenes. Both media, in combination with two solvents, allowed for enantiodiscrimination, which was, to the best of our knowledge, proved for the first time on inherently chiral compounds. Moreover, using the experimental RDCs, we investigated the calix[4]arenes conformational preferences in solution, quantitatively analyzed the differences in the alignment of the enantiomers, and discussed the pitfalls of the use of the RDC analysis.

Crystal structure of potato 14-3-3 protein St14f revealed the importance of helix I in StFDL1 recognition

In potato (Solanum tuberosum L.), 14-3-3 protein forms a protein complex with the FLOWERING LOCUS T (FT)-like protein StSP6A and the FD-like protein StFDL1 to activate potato tuber formation. Eleven 14-3-3 isoforms were reported in potato, designated as St14a-k. In this study, the crystal structure of the free form of St14f was determined at 2.5 Å resolution. Three chains were included in the asymmetric unit of the St14f free form crystal, and the structural deviation among the three chain structures was found on the C-terminal helix H and I. The St14f free form structure in solution was also investigated by nuclear magnetic resonance (NMR) residual dipolar coupling analysis, and the chain B in the crystal structure was consistent with NMR data. Compared to other crystal structures, St14f helix I exhibited a different conformation with larger B-factor values. Larger B-factor values on helix I were also found in the 14-3-3 free form structure with higher solvent contents. The mutation in St14f Helix I stabilized the complex with StFDL1. These data clearly showed that the flexibility of helix I of 14-3-3 protein plays an important role in the recognition of target protein.

A fast microfluidic mixer enabling rapid preparation of homogeneous PEG and bicelle media for RDC in NMR analysis

Residual dipolar couplings (RDCs) are widely used in NMR for the investigation of protein structure and dynamics. However, commonly used RDC media (e.g., C12E5/Hexanol/H2O or PEG system, lipid bilayer or bicelle system) are unstable viscous liquids, making it challenging to obtain stable and homogeneous NMR samples by laborious manual operation. In this paper, we report a unique fishhook-shaped micromixer (FS-mixer) that enables fast and thorough mixing of high-viscosity PEG and bicelle media for RDC analysis. Numerical simulations and experimental characterizations proved that the micromixer could achieve a complete mixing of viscous liquids in 382.4 μs, improved significantly over current mixers. In compared to manually prepared RDC samples, the on-chip prepared samples have a better uniformity and alignment efficiency, and show more stable peak split in the 2H spectrum. As a proof of concept, we prepared a RDC sample for INSM1 ZF1-2 protein by using this FS-mixer. The IPAP-HSQC spectra demonstrated that this strategy can efficiently prevent the generation of low resolution and distorted spectra, which could facilitate further refinement of the NMR structure. This micromixer-assisted sampling method greatly simplifies the procedure, increases the media uniformity and stability, and shortens the time in RDC analysis. We believe it could serve as a useful tool in RDC-based NMR analysis.

The Flexibility of Oligosaccharides Unveiled Through Residual Dipolar Coupling Analysis.

The intrinsic flexibility of glycans complicates the study of their structures and dynamics, which are often important for their biological function. NMR has provided insights into the conformational, dynamic and recognition features of glycans, but suffers from severe chemical shift degeneracy. We employed labelled glycans to explore the conformational behaviour of a β(1-6)-Glc hexasaccharide model through residual dipolar couplings (RDCs). RDC delivered information on the relative orientation of specific residues along the glycan chain and provided experimental clues for the existence of certain geometries. The use of two different aligning media demonstrated the adaptability of flexible oligosaccharide structures to different environments.

The Flexibility of Oligosaccharides Unveiled Through Residual Dipolar Coupling Analysis

The Flexibility of Oligosaccharides Unveiled Through Residual Dipolar Coupling Analysis

Xylarichalasin A, a Halogenated Hexacyclic Cytochalasan from the Fungus Xylaria cf. curta.

A cytochalasan, xylarichalasin A, was obtained from the endophytic fungus Xylaria cf. curta harbored in Solanum tuberosum. Its structure was elucidated by comprehensive spectroscopic methods including HRESIMS, 1D/2D NMR, and residual dipolar coupling analysis as well as quantum chemistry calculations including DFT GIAO 13C NMR and ECD calculation. It has an unprecedented 6/7/5/6/6/6 fused polycyclic structure. In bioassay, xylarichalasin A showed cytotoxicity against human cancer cell lines with IC50 value ranging from 6.3-17.3 μM.

Conformational Analysis of an Antibacterial Cyclodepsipeptide Active against Mycobacterium tuberculosis by a Combined ROE and RDC Analysis.

Griselimycin (GM) and methylgriselimycin (MGM), naturally produced by microorganisms of the genus Streptomyces, are cyclic depsipeptides composed of ten amino acids. They exhibit antibacterial activity against Mycobacterium species by inhibiting the sliding clamp of prokaryotic DNA polymerase III and are therefore considered as potential anti-tuberculosis drugs. The difference between the peptides is the presence of l-(R)-4-methyl-proline in MGM instead of l-proline in GM at position 8 of the amino acid sequence. Methylation increases both metabolic stability and activity of MGM compared to GM. To get deeper insight into the structure-activity relationship, the solution structure of the cyclic part of MGM was determined using rotating-frame nuclear Overhauser effect (ROE) distance restraints and residual dipolar couplings (RDC). The structure of MGM in solution is compared to the structure of GM in a co-crystal with DNA polymerase III subunit beta. As a result, a highly defined structural model of MGM is obtained, which shows related characteristics to the bound GM.

Computer-Assisted 3D Structure Elucidation of Natural Products using Residual Dipolar Couplings.

An enhanced computer-assisted procedure for the determination of the relative configuration of natural products, which starts from the molecular formula and uses a combination of conventional 1D and 2D NMR spectra, and residual dipolar couplings (RDCs), is reported. Having already the data acquired (1D/2D NMR and RDCs), the procedure begins with the determination of the molecular constitution using standard computer-assisted structure elucidation (CASE) and is followed by fully automated determination of relative configuration through RDC analysis. In the case of moderately flexible molecules the simplest data-explaining conformational model is selected by the use of the Akaike information criterion.

Computer‐Assisted 3D Structure Elucidation of Natural Products using Residual Dipolar Couplings

AbstractAn enhanced computer‐assisted procedure for the determination of the relative configuration of natural products, which starts from the molecular formula and uses a combination of conventional 1D and 2D NMR spectra, and residual dipolar couplings (RDCs), is reported. Having already the data acquired (1D/2D NMR and RDCs), the procedure begins with the determination of the molecular constitution using standard computer‐assisted structure elucidation (CASE) and is followed by fully automated determination of relative configuration through RDC analysis. In the case of moderately flexible molecules the simplest data‐explaining conformational model is selected by the use of the Akaike information criterion.

Perspectives in the application of residual dipolar couplings in the structure elucidation of weakly aligned small molecules.

This perspective article aims to review the general methodology in the application of residual dipolar couplings (RDCs) in the structure elucidation of small molecules and give the author's view on challenges for future applications. Recent improvements in the availability of alignment media, new pulse sequences for the measurement of couplings and improvements in the analysis software have garnered widespread interest in the technique. However, further generalization is needed in order to make RDC analysis into a truly "routine" method. Copyright © 2016 John Wiley & Sons, Ltd.

Complete NMR assignment and conformational analysis of 17-α-ethinylestradiol by using RDCs obtained in grafted graphene oxide.

The 1 H and 13 C NMR spectra of 17-α-ethinylestradiol (EE2), a well-known contraceptive, including diastereotopic methylene groups, were fully assigned with the help of residual dipolar couplings (RDC) measured in the recently developed grafted graphene oxide orienting medium. RDC analysis, which included all 1 DCH couplings and the long-range 2 DCH1 H-C≡13 C coupling, also pointed to the presence of a minor conformation arising from pseudo-rotation of the steroid B ring. Saturation-transfer difference (STD) measurements revealed that the most likely interaction between EE2 and orienting medium occurred on the C and D ring. Copyright © 2016 John Wiley & Sons, Ltd.

The Use of a Combination of RDC and Chiroptical Spectroscopy for Determination of the Absolute Configuration of Fusariumin A from the Fungus Fusarium sp.

A new alkylpyrrole derivative, fusariumin A (1), was isolated from the culture broth of the fungus Fusarium sp. The absolute configuration of fuasiumin A has been established as (2′R,3′R) using a combination of RDC (residual dipolar coupling)-based NMR and DFT-supported chiroptical spectroscopy. It is worth to note that in this study without the aid of the RDC analysis, an unambiguous determination of configuration and conformation was not feasible due to the excessive conformational possibilities of this open-chain compound.Electronic supplementary materialThe online version of this article (doi:10.1007/s13659-015-0084-0) contains supplementary material, which is available to authorized users.

Molecular Dynamics of Biomolecules through Direct Analysis of Dipolar Couplings.

Residual dipolar couplings (RDCs) are important probes in structural biology, but their analysis is often complicated by the determination of an alignment tensor or its associated assumptions. We here apply the maximum entropy principle to derive a tensor-free formalism which allows for direct, dynamic analysis of RDCs and holds the classic tensor formalism as a special case. Specifically, the framework enables us to robustly analyze data regardless of whether a clear separation of internal and overall dynamics is possible. Such a separation is often difficult in the core subjects of current structural biology, which include multidomain and intrinsically disordered proteins as well as nucleic acids. We demonstrate the method is tractable and self-consistent and generalizes to data sets comprised of observations from multiple different alignment conditions.

The use of residual dipolar coupling for conformational analysis of structurally related natural products.

Determining the conformational preferences of molecules in solution remains a considerable challenge. Recently, the use of residual dipolar coupling (RDC) analysis has emerged as a key method to address this. Whilst to date the majority of the applications have focused on biomolecules including proteins and DNA, the use of RDCs for studying small molecules is gaining popularity. Having said that, the method continues to develop, and here, we describe an early case study of the quantification of conformer populations in small molecules using RDC analysis. Having been inspired to study conformational preferences by unexpected differences in the NMR spectra and the reactivity of related natural products, we showed that the use of more established techniques was unsatisfactory in explaining the experimental observations. The use of RDCs provided an improved understanding that, following use of methods to quantify conformer populations using RDCs, culminated in a rationalisation of the contrasting diastereoselectivities observed in a ketone reduction reaction.

Dynamic Motions of the HIV-1 Frameshift Site RNA

The HIV-1 frameshift site (FS) plays a critical role in viral replication. During translation, the HIV-1 FS transitions from a 3-helix to a 2-helix junction RNA secondary structure. The 2-helix junction structure contains a GGA bulge, and purine-rich bulges are common motifs in RNA secondary structure. Here, we investigate the dynamics of the HIV-1 FS 2-helix junction RNA. Interhelical motions were studied under different ionic conditions using NMR order tensor analysis of residual dipolar couplings. In 150 mM potassium, the RNA adopts a 43°(±4°) interhelical bend angle (β) and displays large amplitude, anisotropic interhelical motions characterized by a 0.52(±0.04) internal generalized degree of order (GDOint) and distinct order tensor asymmetries for its two helices (η = 0.26(±0.04) and 0.5(±0.1)). These motions are effectively quenched by addition of 2 mM magnesium (GDOint = 0.87(±0.06)), which promotes a near-coaxial conformation (β = 15°(±6°)) of the two helices. Base stacking in the bulge was investigated using the fluorescent purine analog 2-aminopurine. These results indicate that magnesium stabilizes extrahelical conformations of the bulge nucleotides, thereby promoting coaxial stacking of helices. These results are highly similar to previous studies of the HIV transactivation response RNA, despite a complete lack of sequence similarity between the two RNAs. Thus, the conformational space of these RNAs is largely determined by the topology of their interhelical junctions.

Small-Angle X-Ray Scattering- and Nuclear Magnetic Resonance-Derived Conformational Ensemble of the Highly Flexible Antitoxin PaaA2

Antitoxins from prokaryotic type II toxin-antitoxin modules are characterized by a high degree of intrinsic disorder. The description of such highly flexible proteins is challenging because they cannot be represented by a single structure. Here, we present a combination of SAXS and NMR data to describe the conformational ensemble of the PaaA2 antitoxin from the human pathogen E.coli O157. The method encompasses the use of SAXS data to filter ensembles out of a pool of conformers generated by a custom NMR structure calculation protocol and the subsequent refinement by a block jackknife procedure. The final ensemble obtained through the method is validated by an established residual dipolar coupling analysis. We show that the conformational ensemble of PaaA2 is highly compact and that the protein exists in solution as two preformed helices, connected by a flexible linker, that probably act as molecular recognition elements for toxin inhibition.

P15PAF Is an Intrinsically Disordered Protein with Nonrandom Structural Preferences at Sites of Interaction with Other Proteins

We present to our knowledge the first structural characterization of the proliferating-cell-nuclear-antigen-associated factor p15PAF, showing that it is monomeric and intrinsically disordered in solution but has nonrandom conformational preferences at sites of protein-protein interactions. p15PAF is a 12 kDa nuclear protein that acts as a regulator of DNA repair during DNA replication. The p15PAF gene is overexpressed in several types of human cancer. The nearly complete NMR backbone assignment of p15PAF allowed us to measure 86 N-HN residual dipolar couplings. Our residual dipolar coupling analysis reveals nonrandom conformational preferences in distinct regions, including the proliferating-cell-nuclear-antigen-interacting protein motif (PIP-box) and the KEN-box (recognized by the ubiquitin ligase that targets p15PAF for degradation). In accordance with these findings, analysis of the 15N R2 relaxation rates shows a relatively reduced mobility for the residues in these regions. The agreement between the experimental small angle x-ray scattering curve of p15PAF and that computed from a statistical coil ensemble corrected for the presence of local secondary structural elements further validates our structural model for p15PAF. The coincidence of these transiently structured regions with protein-protein interaction and posttranslational modification sites suggests a possible role for these structures as molecular recognition elements for p15PAF.

DYNAFOLD: A DYNAMIC PROGRAMMING APPROACH TO PROTEIN BACKBONE STRUCTURE DETERMINATION FROM MINIMAL SETS OF RESIDUAL DIPOLAR COUPLINGS

Residual Dipolar Couplings (RDCs) are a source of NMR data that can provide a powerful set of constraints on the orientation of inter-nuclear vectors, and are quickly becoming a larger part of the experimental toolset for molecular biologists. However, few reliable protocols exist for the determination of protein backbone structures from small sets of RDCs. DynaFold is a new dynamic programming algorithm designed specifically for this task, using minimal sets of RDCs collected in multiple alignment media. DynaFold was first tested utilizing synthetic data generated for the N--H , C(α)--H(α), and C--N vectors of 1BRF, 1F53, 110M, and 3LAY proteins, with up to ±1 Hz error in three alignment media, and was able to produce structures with less than 1.9 Å of the original structures. DynaFold was then tested using experimental data, obtained from the Biological Magnetic Resonance Bank, for proteins PDBID:1P7E and 1D3Z using RDC data from two alignment media. This exercise yielded structures within 1.0 Å of their respective published structures in segments with high data density, and less than 1.9 Å over the entire protein. The same sets of RDC data were also used in comparisons with traditional methods for analysis of RDCs, which failed to match the accuracy of DynaFold's approach to structure determination.

Combined NMR Analysis of Huge Residual Dipolar Couplings and Pseudocontact Shifts in Terbium(III)-Phthalocyaninato Single Molecule Magnets

Several small paramagnetic complexes combine large hyperfine NMR shifts with large magnetic anisotropies. The latter are a prerequisite for single molecule magnet (SMM) behavior. We choose the SMM tris(octabutoxyphthalocyaninato) diterbium (1) for a high resolution NMR study where we combined for the first time a comprehensive (1)H and (13)C chemical shift analysis of a SMM with the evaluation of large residual dipolar couplings (RDCs). The latter are a consequence of partial alignment of SMM 1 in the strong magnetic field of the NMR spectrometer. To the best of our knowledge RDCs in SMMs have never been reported before. We measured RDCs between -78 and +99 Hz for the (13)C-(1)H vectors of CH bonds and up to -109 Hz for (1)H-(1)H vectors of geminal hydrogen atoms (magnetic field of 14.09 T, temperature 295 K). Considerable negative Fermi contact shifts (up to -60 ppm) were determined for (13)C atoms at the phthalocyaninato core. Paramagnetic (13)C NMR shifts of the butoxy chains as well as all (1)H NMR chemical shifts are a result of pseudocontact shifts (pcs), and therefore it is easily possible to determine the positions of the respective nuclei in solution. Measurements of CH and HH vectors by RDC analysis are in accordance with the geometry as determined by the pseudocontact shifts, but in addition to that, RDCs give information about internal mobility. The axial component of the magnetic susceptibility tensor has been determined independently by pcs and by RDC.