Residential Wood Combustion Research Articles

A co-created citizen science project on the short term effects of outdoor residential woodsmoke on the respiratory health of adults in the Netherlands

Background and aimWoodsmoke from household fireplaces contributes significantly to outdoor air pollution in the Netherlands. The current understanding of the respiratory health effects of exposure to smoke from residential wood burning is limited. This study investigated the association between short-term changes in outdoor woodsmoke exposure and lung function, respiratory symptoms, and medication use in adults in the Netherlands.MethodsThis study was co-created with citizen scientists and other relevant stakeholders. A panel study was conducted with repeated observations in 46 adults between February and May 2021 in four Dutch towns. Participants recorded their symptoms and medication use in daily diaries, and conducted morning and evening home spirometry measurements. Woodsmoke exposure was characterized by measuring levoglucosan (most specific marker for woodsmoke exposure), black/brown carbon, fine and ultrafine particulate matter at central monitoring sites. Individual woodsmoke perception (smell) was recorded in daily diaries. Linear and logistic regression models were used to investigate the association between respiratory health and woodsmoke exposure. Models were adjusted for time-varying confounders and accounted for repeated observations within participants.ResultsConsistent positive associations were found between levoglucosan and shortness of breath (SOB) during rest and extra respiratory medication use. Odds ratios for current day exposure to levoglucosan were 1.12 (95% CI: 0.97, 1.30) for SOB during rest and 1.19 (95% CI: 1.07, 1.33) for extra medication use, expressed per interquartile range of levoglucosan concentrations (69.16 ng/m3). Positive non-significant associations were found between levoglucosan and nasal symptoms, cough and waking up with SOB. No consistent association was found between levoglucosan and lung function. Associations found between woodsmoke markers, SOB during rest and extra medication use remained after the inclusion of PM2.5 and UFP in two-pollutant models.ConclusionsAdults experienced more SOB during rest, nasal symptoms and used more medication to treat respiratory symptoms on days with higher levels of outdoor woodsmoke concentrations.

Black carbon and particle lung-deposited surface area in residential wood combustion emissions: Effects of an electrostatic precipitator and photochemical aging

Residential wood combustion (RWC) remains a significant global source of particulate matter (PM) emissions with adverse impacts on regional air quality, climate, and human health. The lung-deposited surface area (LDSA) and equivalent black carbon (eBC) concentrations have emerged as important metrics to assess particulate pollution. In this study we estimated combustion phase-dependent emission factors of LDSA for alveolar, tracheobronchial, and head-airway regions of human lungs and explored the relationships between eBC and LDSA in fresh and photochemically aged RWC emissions. Photochemical aging was simulated in an oxidative flow reactor at OH• exposures equivalent to 1.4 or 3.4 days in the atmosphere. Further, the efficiency of a small-scale electrostatic precipitator (ESP) for reducing LDSA and eBC from the wood stove was determined. For fresh emission eBC correlated extremely well with LDSA, but the correlation decreased after aging. Soot-dominated flaming phase showed the highest eBC dependency of LDSA whereas for ignition and char burning phases non-BC particles contributed strongly the LDSA. Deposition to the alveolar region contributed around 60 % of the total lung-deposition. The ESP was found as an effective method to mitigate particulate mass, LDSA, as well as eBC emissions from wood stoves, as they were reduced on average by 72%, 71%, and 69%, respectively. The reduction efficiencies, however, consistently dropped over the span of an experiment, especially for eBC. Further, the ESP was found to increase the sub-30 nm ultrafine particle number emissions, with implications for LDSA. The results of this study can be used for assessing the contribution of RWC to LDSA concentrations in ambient air.

Residential wood burning in Southern Chile: a perinatal health study in Temuco

Residential wood burning in Southern Chile: a perinatal health study in Temuco

Residential Wood Burning and Vehicle Emissions as Major Sources of Environmentally Persistent Free Radicals in Fairbanks, Alaska.

Environmentally persistent free radicals (EPFRs) play an important role in aerosol effects on air quality and public health, but their atmospheric abundance and sources are poorly understood. We measured EPFRs contained in PM2.5 collected in Fairbanks, Alaska, in winter 2022. We find that EPFR concentrations were enhanced during surface-based inversion and correlate strongly with incomplete combustion markers, including carbon monoxide and elemental carbon (R2 > 0.75). EPFRs exhibit moderately good correlations with PAHs, biomass burning organic aerosols, and potassium (R2 > 0.4). We also observe strong correlations of EPFRs with hydrocarbon-like organic aerosols, Fe and Ti (R2 > 0.6), and single-particle mass spectrometry measurements reveal internal mixing of PAHs, with potassium and iron. These results suggest that residential wood burning and vehicle tailpipes are major sources of EPFRs and nontailpipe emissions, such as brake wear and road dust, may contribute to the stabilization of EPFRs. Exposure to the observed EPFR concentrations (18 ± 12 pmol m-3) would be equivalent to smoking ∼0.4-1 cigarette daily. Very strong correlations (R2 > 0.8) of EPFR with hydroxyl radical formation in surrogate lung fluid indicate that exposure to EPFRs may induce oxidative stress in the human respiratory tract.

Source apportionment of particle-bound polycyclic aromatic hydrocarbons (PAHs), oxygenated PAHs (OPAHs), and their associated long-term health risks in a major European city

Many studies have drawn attention to the associations of oxygenated polycyclic aromatic hydrocarbons (OPAHs) with harmful health effects, advocating for their systematic monitoring alongside simple PAHs to better understand the aerosol carcinogenic potential in urban areas. To address this need, this study conducted an extensive PM2.5 sampling campaign in Athens, Greece, at the Thissio Supersite of the National Observatory of Athens, from December 2018 to July 2021, aiming to characterize the levels and variability of polycyclic aromatic compounds (PACs), perform source apportionment, and assess health risk. Cumulative OPAH concentrations (Σ-OPAHs) were in the same range as Σ-PAHs (annual average 4.2 and 5.6 ng m−3, respectively). They exhibited a common seasonal profile with enhanced levels during the heating seasons, primarily attributed to residential wood burning (RWB). The episodic impact of biomass burning was also observed during a peri-urban wildfire event in May 2021, when PAH and OPAH concentrations increased by a factor of three compared to the monthly average. The study period also included the winter 2020–2021 COVID-19 lockdown, during which PAH and OPAH levels decreased by >50 % compared to past winters. Positive matrix factorization (PMF) source apportionment, based on a carbonaceous aerosol speciation dataset, identified PAC sources related to RWB, local traffic (gasoline vehicles) and urban traffic (including diesel emissions), as well as an impact of regional organic aerosol. Despite its seasonal character, RWB accounted for nearly half of Σ-PAH and over two-thirds of Σ-OPAH concentrations. Using the estimated source profiles and contributions, the source-specific carcinogenic potency of the studied PACs was calculated, revealing that almost 50 % was related to RWB. These findings underscore the urgent need to regulate domestic biomass burning at a European level, which can provide concrete benefits for improving urban air quality, towards the new stricter EU standards, and reducing long-term health effects.

The Effect of Wood Species on Fine Particle and Gaseous Emissions from a Modern Wood Stove

Residential wood combustion (RWC) is a significant source of gaseous and particulate emissions causing adverse health and environmental effects. Several factors affect emissions, but the effects of the fuel wood species on emissions are currently not well understood. In this study, the Nordic wood species (named BirchA, BirchB, Spruce, SpruceDry, Pine and Alder) were combusted in a modern stove, and the emissions were studied. The lowest emissions were obtained from the combustion of BirchA and the highest from Spruce and Alder. The fine particle mass (PM2.5) was mainly composed of elemental carbon (50–70% of PM2.5), which is typical in modern appliances. The lowest PAH concentrations were measured from BirchA (total PAH 107 µg/m3) and Pine (250 µg/m3). In the ignition batch, the PAH concentration was about 4-fold (416 µg/m3). The PAHs did not correlate with other organic compounds, and thus, volatile organic compounds (VOCs) or organic carbon (OC) concentrations cannot be used as an indicator of PAH emissions. Two birch species from different origins with a similar chemical composition but different density produced partially different emission profiles. This study indicates that emission differences may be due more to the physical properties of the wood and the combustion conditions than to the wood species themselves.

Large contribution of in-cloud production of secondary organic aerosol from biomass burning emissions

Organic compounds released from wildfires and residential biomass burning play a crucial role in shaping the composition of the atmosphere. The solubility and subsequent reactions of these compounds in the aqueous phase of clouds and fog remain poorly understood. Nevertheless, these compounds have the potential to become an important source of secondary organic aerosol (SOA). In this study, we simulated the aqueous SOA (aqSOA) from residential wood burning emissions under atmospherically relevant conditions of gas-liquid phase partitioning, using a wetted-wall flow reactor (WFR). We analyzed and quantified the specific compounds present in these emissions at a molecular level and determined their solubility in clouds. Our findings reveal that while 1% of organic compounds are fully water-soluble, 19% exhibit moderate solubility and can partition into the aqueous phase in a thick cloud. Furthermore, it is found that the aqSOA generated in our laboratory experiments has a substantial fraction being attributed to the formation of oligomers in the aqueous phase. We also determined an aqSOA yield of 20% from residential wood combustion, which surpasses current estimates based on gas-phase oxidation. These results indicate that in-cloud chemistry of organic gases emitted from wood burning can serve as an efficient pathway to produce organic aerosols, thus potentially influencing climate and air quality.

Improving residential wood burning emission inventories with the integration of readily available data sources

Residential wood burning (RWB) is the largest anthropogenic source of PM2.5 in many North American and European cities in the winter. The current lack of information on the locations, types, and intensity of use of wood burning appliances limits the ability to accurately assess the exposure of the population to RWB emissions. In this study, we generated a high spatial resolution emission inventory for RWB in the province of Quebec, Canada using a novel data driven approach. The method first combines real estate and socioeconomic census data through machine learning models to estimate ownership rates of fireplaces and wood stoves. These ownership rates are then combined with household survey data (on wood consumption and types of appliances), emission factors and building registry data to generate the emission inventory at a 1Km2 resolution. Our proposed approach was able to capture spatial patterns in RWB appliance ownership and intensity of use, which may be overlooked by using simple urban vs rural or population based spatial proxies. The machine learning models explained 80.3 % and 63 % of the variability in wood stove and fireplace ownership rates with each appliance type exhibiting different spatial trends. Wood stoves were common in rural areas and among lower income households, whereas fireplaces were more common in urban areas. Additionally, we observed large spatial and regional variability in emissions per residence due to differences in wood consumption, appliance ownership rates, and appliance mixes (e.g. conventional vs certified). Our results suggest that using simple spatial proxies based on population, urbanization levels or residence type are not enough to explain the spatial distribution of RWB emissions as they might overlook other factors such as socioeconomic factors or regional heating preferences. Finally, our spatially distributed emissions were strongly correlated (r = 0.86) with the increase in PM2.5 concentrations during peak-RWB hours on winter weekends at 42 reference stations across the province of Quebec.

Sources of wintertime PM2.5 at a major city in an Alpine Valley: The role of atmospheric dispersion and inversion dynamics

Urban areas in mountain environments are generally located on valley floors surrounded by slopes, where mountain orography drives peculiar meteorology and atmospheric circulation. Also, persistent inversion dynamics may occur strongly affecting air pollution. This study characterizes the PM2.5 pollution in a major city located in an Alpine valley (Belluno, Northeastern Italy) during the cold season (Autumn-Winter). Major particulate species (elemental and organic carbon, major inorganic ions) and minor/trace elements conventionally used as tracers for source apportionment were analyzed, including oxalate and specific PM2.5-bound tracers for biomass burning (K+, levoglucosan, mannosan, galactosan) and for primary biogenic organic aerosol (arabitol, mannitol, glucose). PM2.5 sources are identified through positive matrix factorization and a series of post-processing tools. Results indicate that biomass burning, mostly emitted by residential wood combustion for domestic heating, is the major source (52% PM2.5 mass concentration), followed by secondary aerosol (21%), biogenic aerosol (20%), traffic (4%), and dust resuspension (3%). The source contributions are assessed by accounting for the local meteorology. Insights into the dispersion or buildup of PM2.5 sources were then investigated by dispersion normalization. In addition, the possible effects of persistent thermal inversion events were evaluated by assessing the inversion strength from temperature profiles measured at multiple weather stations at different elevations with respect to the source contributions. Beyond the identification of those emission sources requiring further mitigation actions, this study also analyses the potential effects of local meteorology on PM2.5 pollution. The methodologies applied in this study can be easily adopted to other mountain environments for successful management of air quality.

Spatiotemporal Gradients of PAH Concentrations in Greek Cities and Associated Exposure Impacts.

To study the spatiotemporal variability of particle-bound polycyclic aromatic hydrocarbons (PAHs) and assess their carcinogenic potential in six contrasting urban environments in Greece, a total of 305 filter samples were collected and analyzed. Sampling sites included a variety of urban background, traffic (Athens, Ioannina and Heraklion), rural (Xanthi) and near-port locations (Piraeus and Volos). When considering the sum of 16 U.S. EPA priority PAHs, as well as that of the six EU-proposed members, average concentrations observed across locations during summer varied moderately (0.4-2.2 ng m-3) and independently of the population of each site, with the highest values observed in the areas of Piraeus and Volos that are affected by port and industrial activities. Winter levels were significantly higher and more spatially variable compared to summer, with the seasonal enhancement ranging from 7 times in Piraeus to 98 times in Ioannina, indicating the large impact of PAH emissions from residential wood burning. Regarding benzo(a)pyrene (BaP), an IARC Group 1 carcinogen and the only EU-regulated PAH, the winter/summer ratios were 24-33 in Athens, Volos, Heraklion and Xanthi; 60 in Piraeus; and 480 in Ioannina, which is afflicted by severe wood-burning pollution events. An excellent correlation was observed between organic carbon (OC) and benzo(a)pyrene (BaP) during the cold period at all urban sites (r2 > 0.8) with stable BaP/OC slopes (0.09-0.14 × 10-3), highlighting the potential use of OC as a proxy for the estimation of BaP in winter conditions. The identified spatiotemporal contrasts, which were explored for the first time for PAHs at such a scale in the Eastern Mediterranean, provide important insights into sources and controlling atmospheric conditions and reveal large deviations in exposure risks among cities that raise the issue of environmental injustice on a national level.

Contribution of brown carbon to light absorption in emissions of European residential biomass combustion appliances

Abstract. Residential biomass combustion significantly contributes to light-absorbing carbonaceous aerosols in the atmosphere, impacting the earth's radiative balance at regional and global levels. This study investigates the contribution of brown carbon (BrC) to the total particulate light absorption in the wavelength range of 370–950 nm (BrC370–950) and the particulate absorption Ångström exponents (AAE470/950) in 15 different European residential combustion appliances using a variety of wood-based fuels. BrC370–950 was estimated to be from 1 % to 21 % for wood log stoves and 10 % for a fully automatized residential pellet boiler. Correlations between the ratio of organic to elemental carbon (OC / EC) and BrC370–950 indicated that a one-unit increase in OC / EC corresponded to approximately a 14 % increase in BrC370–950. Additionally, BrC370–950 was clearly influenced by the fuel moisture content and the combustion efficiency, while the effect of the combustion appliance type was less prominent. AAE470/950 of wood log combustion aerosols ranged from 1.06 to 1.61. By examining the correlation between AAE470/950 and OC / EC, an AAE470/950 close to unity was found for pure black carbon (BC) particles originating from residential wood combustion. This supports the common assumption used to differentiate light absorption caused by BC and BrC. Moreover, diesel aerosols exhibited an AAE470/950 of 1.02, with BrC contributing only 0.66 % to the total absorption, aligning with the assumption employed in source apportionment. These findings provide important data to assess the BrC from residential wood combustion with different emission characteristics and confirm that BrC can be a major contributor to particulate UV and near-UV light absorption for northern European wood stove emissions with relatively high OC / EC ratios.

Composition and sources of carbonaceous aerosol in the European Arctic at Zeppelin Observatory, Svalbard (2017 to 2020)

Abstract. We analyzed long-term measurements of organic carbon, elemental carbon, and source-specific organic tracers from 2017 to 2020 to constrain carbonaceous aerosol sources in the rapidly changing Arctic. Additionally, we used absorption photometer (Aethalometer) measurements to constrain equivalent black carbon (eBC) from biomass burning and fossil fuel combustion, using positive matrix factorization (PMF). Our analysis shows that organic tracers are essential for understanding Arctic carbonaceous aerosol sources. Throughout 2017 to 2020, levoglucosan exhibited bimodal seasonality, reflecting emissions from residential wood combustion (RWC) in the heating season (November to May) and from wildfires (WFs) in the non-heating season (June to October), demonstrating a pronounced interannual variability in the influence of WF. Biogenic secondary organic aerosol (BSOA) species (2-methyltetrols) from isoprene oxidation was only present in the non-heating season, peaking in July to August. Warm air masses from Siberia led to a substantial increase in 2-methyltetrols in 2019 and 2020 compared to 2017 to 2018. This highlights the need to investigate the contribution of local sources vs. long-range atmospheric transport (LRT), considering the temperature sensitivity of biogenic volatile organic compound emissions from Arctic vegetation. Tracers of primary biological aerosol particles (PBAPs), including various sugars and sugar alcohols, showed elevated levels in the non-heating season, although with different seasonal trends, whereas cellulose had no apparent seasonality. Most PBAP tracers and 2-methyltetrols peaked during influence of WF emissions, highlighting the importance of measuring a range of source-specific tracers to understand sources and dynamics of carbonaceous aerosol. The seasonality of carbonaceous aerosol was strongly influenced by LRT episodes, as background levels are extremely low. In the non-heating season, the organic aerosol peak was as influenced by LRT, as was elemental carbon during the Arctic haze period. Source apportionment of carbonaceous aerosol by Latin hypercube sampling showed mixed contributions from RWC (46 %), fossil fuel (FF) sources (27 %), and BSOA (25 %) in the heating season. In contrast, the non-heating season was dominated by BSOA (56 %), with lower contributions from WF (26 %) and FF sources (15 %). Source apportionment of eBC by PMF showed that FF combustion dominated eBC (70±2.7 %), whereas RWC (22±2.7 %) was more abundant than WF (8.0±2.9 %). Modeled BC concentrations from FLEXPART (FLEXible PARTicle dispersion model) attributed an almost equal share to FF sources (51±3.1 %) and to biomass burning. Both FLEXPART and the PMF analysis concluded that RWC is a more important source of (e)BC than WF. However, with a modeled RWC contribution of 30±4.1 % and WF of 19±2.8 %, FLEXPART suggests relatively higher contributions to eBC from these sources. Notably, the BB fraction of EC was twice as high as that of eBC, reflecting methodological differences between source apportionment by LHS and PMF. However, important conclusions drawn are unaffected, as both methods indicate the presence of RWC- and WF-sourced BC at Zeppelin, with a higher relative BB contribution during the non-heating season. In summary, organic aerosol (281±106 ng m−3) constitutes a significant fraction of Arctic PM10, although surpassed by sea salt aerosol (682±46.9 ng m−3), mineral dust (613±368 ng m−3), and typically non-sea-salt sulfate SO42- (314±62.6 ng m−3), originating mainly from anthropogenic sources in winter and from natural sources in summer.

Optical properties and simple forcing efficiency of the organic aerosols and black carbon emitted by residential wood burning in rural central Europe

Abstract. Recent years have seen an increase in the use of wood for energy production of over 30 %, and this trend is expected to continue due to the current energy crisis and geopolitical instability. At present, residential wood burning (RWB) is one of the most important sources of organic aerosols (OAs) and black carbon (BC), posing a significant risk to air quality and health. Simultaneously, as a substantial aerosol source, RWB also holds relevance in the context of aerosol radiative effects and climate. While BC is recognized for its large light absorption cross-section, the role of OAs in light absorption is still under evaluation due to their heterogeneous composition and source-dependent optical properties. Existing studies that characterize wood-burning aerosol emissions in Europe primarily concentrate on urban and background sites and focus on BC properties. Despite the significant RWB emissions in rural areas, these locations have received comparatively less attention. The present scenario underscores the imperative for an improved understanding of RWB pollution, aerosol optical properties, and their subsequent connection to climate impacts, particularly in rural areas. We have characterized atmospheric aerosol particles from a central European rural site during wintertime in the village of Retje in Loški Potok, Slovenia, from 1 December 2017 to 7 March 2018. The village experienced extremely high aerosol concentrations produced by RWB and near-ground temperature inversion. The isolated location of the site and the substantial local emissions made it an ideal laboratory-like place for characterizing RWB aerosols with low influence from non-RWB sources under ambient conditions. The mean mass concentrations of OA and BC were 35 µg m−3 (max⁡=270 µg m−3) and 3.1 µg m−3 (max⁡=24 µg m−3), respectively. The mean total particle number concentration (10–600 nm) was 9.9×103 particles cm−3 (max⁡=59×103 particles cm−3). The mean total light absorption coefficients at 370 and 880 nm measured by an AE33 Aethalometer were 120 and 22 Mm−1 and had maximum values of 1100 and 180 Mm−1, respectively. The aerosol concentrations and absorption coefficients measured during the campaign in Loški Potok were significantly larger than reported values for several urban areas in the region with larger populations and a larger extent of aerosol sources. Here, considerable contributions from brown carbon (BrC) to the total light absorption were identified, reaching up to 60 % and 48 % in the near-UV (370 nm) and blue (470 nm) wavelengths. These contributions are up to 3 times higher than values reported for other sites impacted by wood-burning emissions. The calculated mass absorption cross-section and the absorption Ångström exponent for RWB OA were MACOA,370nm=2.4 m2 g−1, and AAEBrC,370-590nm=3.9, respectively. Simple-forcing-efficiency (SFE) calculations were performed as a sensitivity analysis to evaluate the climate impact of the RWB aerosols produced at the study site by integrating the optical properties measured during the campaign. The SFE results show a considerable forcing capacity from the local RWB aerosols, with a high sensitivity to OA absorption properties and a more substantial impact over bright surfaces like snow, typical during the coldest season with higher OA emissions from RWB. Our study's results are highly significant regarding air pollution, optical properties, and climate impact. The findings suggest that there may be an underestimation of RWB emissions in rural Europe and that further investigation is necessary.

Assessing the Oxidative Potential of Outdoor PM2.5 in Wintertime Fairbanks, Alaska.

The oxidative potential (OP) of outdoor PM2.5 in wintertime Fairbanks, Alaska, is investigated and compared to those in wintertime Atlanta and Los Angeles. Approximately 40 filter samples collected in January-February 2022 at a Fairbanks residential site were analyzed for OP utilizing dithiothreitol-depletion (OPDTT) and hydroxyl-generation (OPOH) assays. The study-average PM2.5 mass concentration was 12.8 μg/m3, with a 1 h average maximum of 89.0 μg/m3. Regression analysis, correlations with source tracers, and contrast between cold and warmer events indicated that OPDTT was mainly sensitive to copper, elemental carbon, and organic aerosol from residential wood burning, and OPOH to iron and organic aerosol from vehicles. Despite low photochemically-driven oxidation rates, the water-soluble fraction of OPDTT was unusually high at 77%, mainly from wood burning emissions. In contrast to other locations, the Fairbanks average PM2.5 mass concentration was higher than Atlanta and Los Angeles, whereas OPDTT in Fairbanks and Atlanta were similar, and Los Angeles had the highest OPDTT and OPOH. Site differences were observed in OP when normalized by both the volume of air sampled and the particle mass concentration, corresponding to exposure and the intrinsic health-related properties of PM2.5, respectively. The sensitivity of OP assays to specific aerosol components and sources can provide insights beyond the PM2.5 mass concentration when assessing air quality.

The contribution of residential wood combustion to the PM2.5 concentrations in the Helsinki metropolitan area

Abstract. This article has investigated the contribution of residential wood combustion (RWC) to the fine particulate matter (PM2.5) concentrations in the Helsinki metropolitan area (HMA) for 6 years, from 2009 to 2014. We have used the PM2.5 concentrations measured at eight air quality measurement stations. The dispersion of emissions on an urban scale was evaluated with multiple-source Gaussian dispersion models, UDM-FMI (urban dispersion model of the Finnish Meteorological Institute) and CAR-FMI (Contaminants in the Air from a Road model of the Finnish Meteorological Institute), and on a regional scale using the chemical transport model SILAM (System for Integrated modeLling of Atmospheric coMposition). The overall agreement of the predicted concentrations with measurements of PM2.5 was good or fairly good for all stations and years; e.g. at the permanent residential station the daily average values of the index of agreement ranged from 0.69 to 0.81, and the fractional bias values ranged from −0.08 to 0.11, for the considered 6 years. Both the measured and predicted daily averaged concentrations showed increasing trends towards the lower-temperature values. The highest predicted annual averaged concentrations in the region occurred in the vicinity of major roads and streets and in the suburban residential areas to the northwest, north, and northeast of the city centre. The average concentrations of PM2.5 attributed to RWC in winter were up to 10- or 15-fold, compared to the corresponding concentrations in summer. During the considered 6-yearly period, the spatially highest predicted fractions of RWC of the annual PM2.5 concentrations ranged from 12 % to 14 %. In winter, the corresponding contributions ranged from 16 % to 21 %. The RWC contribution was higher than the corresponding urban vehicular traffic contribution at all the residential stations during all years. The study has highlighted new research needs for the future, in particular (i) the modelling of the RWC emissions that would be explicitly based on the actual ambient temperatures and (ii) the modelling of the impacts of the most important holiday periods on the emissions from RWC.

Self-reported health impacts of do-it-yourself air cleaner use in a smoke-impacted community

BackgroundSmoke exposure from wildfires or residential wood burning for heat is a public health problem for many communities. Do-It-Yourself (DIY) portable air cleaners (PACs) are promoted as affordable alternatives to commercial PACs, but evidence of their effect on health outcomes is limited. ObjectivePilot test an evaluation of the effect of DIY PAC usage on self-reported symptoms, and investigate barriers and facilitators of PAC use, among members of a tribal community that routinely experiences elevated concentrations of fine particulate matter (PM2.5) from smoke. MethodsWe conducted studies in Fall 2021 (“wildfire study”; N = 10) and Winter 2022 (“wood stove study”; N = 17). Each study included four sequential one-to-two-week phases: 1) initial, 2) DIY PAC usage ≥8 h/day, 3) commercial PAC usage ≥8 h/day, and 4) air sensor with visual display and optional PAC use. We continuously monitored PAC usage and indoor/outdoor PM2.5 concentrations in homes. Concluding each phase, we conducted phone surveys about participants’ symptoms, perceptions, and behaviors. We analyzed symptoms associated with PAC usage and conducted an analysis of indoor PM2.5 concentrations as a mediating pathway using mixed effects multivariate linear regression. We categorized perceptions related to PACs into barriers and facilitators of use. ResultsNo association was observed between PAC usage and symptoms, and the mediation analysis did not indicate that small observed trends were attributable to changes in indoor PM2.5 concentrations. Small sample sizes hindered the ability to draw conclusions regarding the presence or absence of causal associations. DIY PAC usage was low; loud operating noise was a barrier to use. DiscussionThis research is novel in studying health effects of DIY PACs during wildfire and wood smoke exposures. Such research is needed to inform public health guidance. Recommendations for future studies on PAC use during smoke exposure include building flexibility of intervention timing into the study design.

Randomized trial in rural Native American homes heated with wood stoves: results from the EldersAIR study.

Residential wood burning has both practical and traditional value among many indigenous communities of the United States Mountain West, although household biomass burning also results in emissions that are harmful to health. In a household-level three-arm placebo-controlled randomized trial we tested the efficacy of portable filtration units and education interventions on improving pulmonary function and blood pressure measures among elder participants that use wood stoves for residential heating. A total of 143 participants were assigned to the Education (n=49), Filter (n=47), and Control (n=47) arms. Blood pressure and spirometry measures were collected multiple times during a per-intervention winter period and during a follow-up post-intervention winter period. Despite strong PM2.5 exposure reduction results with the Filter arm (50% lower compared to Control arm), neither this intervention nor the Education intervention translated to improvements in the selected health measures among this population with a mixture of chronic conditions. Intention to treat analysis failed to demonstrate evidence that either of the intervention arms had beneficial effects on the blood pressure or the spirometry measures. Post-hoc evaluation of effect modification for blood pressure and spirometry outcomes did not reveal any interaction influence on the outcomes according to sex, residential smoking, chronic disease history and study area.

Molecular composition of fresh and aged aerosols from residential wood combustion and gasoline car with modern emission mitigation technology.

Emissions from road traffic and residential heating contribute to urban air pollution. Advances in emission reduction technologies may alter the composition of emissions and affect their fate during atmospheric processing. Here, emissions of a gasoline car and a wood stove, both equipped with modern emission mitigation technology, were photochemically aged in an oxidation flow reactor to the equivalent of one to five days of photochemical aging. Fresh and aged exhausts were analyzed by ultrahigh resolution mass spectrometry. The gasoline car equipped with a three-way catalyst and a gasoline particle filter emitted minor primary fine particulate matter (PM2.5), but aging led to formation of particulate low-volatile, oxygenated and highly nitrogen-containing compounds, formed from volatile organic compounds (VOCs) and gases incl. NOx, SO2, and NH3. Reduction of the particle concentration was also observed for the application of an electrostatic precipitator with residential wood combustion but with no significant effect on the chemical composition of PM2.5. Comparing the effect of short and medium photochemical exposures on PM2.5 of both emission sources indicates a similar trend for formation of new organic compounds with increased carbon oxidation state and nitrogen content. The overall bulk compositions of the studied emission exhausts became more similar by aging, with many newly formed elemental compositions being shared. However, the presence of particulate matter in wood combustion results in differences in the molecular properties of secondary particles, as some compounds were preserved during aging.

Source apportionment of soot particles and aqueous-phase processing of black carbon coatings in an urban environment

Abstract. The impacts of soot particles on climate and human health depend on the concentration of black carbon (BC) as well as the thickness and composition of the coating material, i.e., organic and inorganic compounds internally mixed with BC. In this study, the size-resolved chemical composition of BC-containing aerosol was measured using a high-resolution soot particle aerosol mass spectrometer (SP-AMS) during wintertime in Fresno, California, a location influenced by abundant combustion emissions and frequent fog events. Concurrently, particle optical properties were measured to investigate the BC absorption enhancement. Positive matrix factorization (PMF) analysis was performed on the SP-AMS mass spectral measurements to explore the sources of soot particles and the atmospheric processes affecting the properties of BC coatings. The analysis revealed that residential woodburning and traffic are the dominant sources of soot particles. Alongside primary soot particles originating from biomass burning (BBOABC) and vehicles (HOABC) two distinct types of processed BC-containing aerosol were identified: fog-related oxidized organic aerosol (FOOABC) and winter-background OOABC (WOOABC). Both types of OOABC showed evidence of having undergone aqueous processing, albeit with differences. The concentration of FOOABC was substantially elevated during fog events, indicating the formation of aqueous secondary organic aerosol (aqSOA) within fog droplets. On the other hand, WOOABC was present at a relatively consistent concentration throughout the winter and was likely related to the formation of secondary organic aerosol (SOA) in both the gas phase and aerosol liquid water. By comparing the chemical properties and temporal variations in FOOABC and WOOABC, we gain insights into the key aging processes of BC aerosol. It was found that aqueous-phase reactions facilitated by fog droplets had a significant impact on the thickness and chemical composition of BC coatings, thereby affecting the light absorption and hygroscopic properties of soot particles. These findings underscore the important role of chemical reactions occurring within clouds and fogs and influencing the climate forcing of BC aerosol in the atmosphere.

Bulk and molecular-level composition of primary organic aerosol from wood, straw, cow dung, and plastic burning

Abstract. During the past decades, the source apportionment of organic aerosol (OA) in ambient air has been improving substantially. The database of source retrieval model-resolved mass spectral profiles for different sources has been built with the aerosol mass spectrometer (AMS). However, distinguishing similar sources (such as wildfires and residential wood burning) remains challenging, as the hard ionization of the AMS mostly fragments compounds and therefore cannot capture detailed molecular information. Recent mass spectrometer technologies of soft ionization and high mass resolution have allowed for aerosol characterization at the molecular formula level. In this study, we systematically estimated the emission factors and characterized the primary OA (POA) chemical composition with the AMS and the extractive electrospray ionization time-of-flight mass spectrometer (EESI-TOF) for the first time from a variety of solid fuels, including beech logs, spruce and pine logs, spruce and pine branches and needles, straw, cow dung, and plastic bags. The emission factors of organic matter estimated by the AMS and hydrocarbon gases estimated by the total hydrocarbon analyzer are 16.2 ± 10.8 g kg−1 and 30.3 ± 8.5 g kg−1 for cow dung burning, which is generally higher than that of wood (beech, spruce, and pine), straw, and plastic bag burning (in the range from 1.1 to 6.2 g kg−1 and 14.1 to 19.3 g kg−1). The POA measured by the AMS shows that the f60 (mass fraction of m/z 60) varies from 0.003 to 0.04 based on fuel types and combustion efficiency for wood (beech, spruce, and pine) and cow dung burning. On a molecular level, the dominant compound of POA from wood, straw, and cow dung is C6H10O5 (mainly levoglucosan), contributing ∼ 7 % to ∼ 30 % of the total intensity, followed by C8H12O6 with fractions of ∼ 2 % to ∼ 9 %. However, as they are prevalent in all burning of biomass material, they cannot act as tracers for the specific sources. By using the Mann–Whitney U test among the studied fuels, we find specific potential new markers for these fuels from the measurement of the AMS and EESI-TOF. Markers from spruce and pine burning are likely related to resin acids (e.g., compounds with 20–21 carbon atoms). The product from the pyrolysis of hardwood lignins is found especially in beech log burning. Nitrogen-containing species are selected markers primarily for cow dung open burning. These markers in the future will provide support for the source apportionment.