Residence Time Research Articles

Floating drug delivery systems: A review

To boost medication bioavailability, target the stomach mucosa, and lengthen gastric residence time, a multi-unit oral floating drug delivery system was created. Due to their potential to enhance drug delivery, floating tablets have become more significant in pharmaceutical formulation. In the upper GIT, where the environment is acidic, tablets absorbs poorly. The bioavailability shows 50% when administer orally. An H2-receptor antagonist called tablets is frequently prescribed to treat gastrointestinal issues brought on by excess stomach acid. With the right excipients and polymers, floating tablets are meant to float on the contents of stomach Over an extended length of time, extending medication release and bioavailability. This review examines the advantages, disadvantages, and in vitro or in-vivo evaluation of famotidine floating tablets with an emphasis on their potential to improve treatment outcomes and patient compliance.

The dominance and growth of shallow groundwater resources in continuous permafrost environments

Water is a limited resource in Arctic watersheds with continuous permafrost because freezing conditions in winter and the impermeability of permafrost limit storage and connectivity between surface water and deep groundwater. However, groundwater can still be an important source of surface water in such settings, feeding springs and large aufeis fields that are abundant in cold regions and generating runoff when precipitation is rare. Whether groundwater is sourced from suprapermafrost taliks or deeper regional aquifers will impact water availability as the Arctic continues to warm and thaw. Previous research is ambiguous about the role of deep groundwater, leading to uncertainty regarding Arctic water availability and changing water resources. We analyzed chemistry and residence times of spring, stream, and river waters in the continuous permafrost zone of Alaska, spanning the mountains to the coastal plain. Water chemistry and age tracers show that surface waters are predominately sourced from recent precipitation and have short (<50 y) subsurface residence times. Remote sensing indicates trends in the areal extent of aufeis over the last 37 y, and correlations between aufeis extent and previous year summer temperature. Together, these data indicate that surface waters in continuous permafrost regions may be impacted by short flow paths and shallow suprapermafrost aquifers that are highly sensitive to climatic and hydrologic change over annual timescales. Despite the lack of connection to regional aquifers, continued warming and permafrost thaw may promote deepening of the shallow subsurface aquifers and creation of shallow taliks, providing some resilience to Arctic freshwater ecosystems.

The Effects of Feedstock, Pyrolysis Temperature, and Residence Time on the Properties and Uses of Biochar from Broom and Gorse Wastes

Biochar (BC), which can be produced from several feedstocks, has been widely studied. However, the BC derived from highly pyrolytic shrubs, such as broom and gorse, has been less frequently used and only partially characterized. These wastes, when used for the preparation of biochar, can fix carbon and contribute to environmental conservation, helping to achieve sustainable development objectives. Eight biochars from broom and gorse were produced and fully analyzed, providing a more complete and novel description, with new insights for assessing their utilization. The aims of this study were to elucidate the effects of feedstock, pyrolysis temperature, and residence time on biochar properties and to assess the adequacy of these biochars as fuel. Elemental and proximate analyses and estimations of the lower and higher heating values were performed, and physical and chemical properties, as well as several other related energy indices, were determined. The experimental results showed that the temperature was a key factor in the properties of the biochars, while residence time was less important. The BCs obtained from the two feedstocks did not show important effects on the properties, which is consistent with the fact that they are woody legumes. These biochars had a high carbon content and were thermally stable. The BCs also had a high calorific value and suitable energetic properties. Additionally, their PAH contents were low, indicating that the use of these biochars would be safe. In conclusion, broom- and gorse-derived biochars can be considered as renewable fuels for green energy production.

Investigation of Hydrocolloid Plant Polysaccharides as Potential Candidates to Mimic the Functions of MUC5B in Saliva

The successful substitution of complex physiological fluids, such as human saliva, remains a major challenge in drug development. Although there are a large number of saliva substitutes on the market, their efficacy is often inadequate due to short residence time in the mouth, unpleasant mouthfeel, or insufficient protection of the teeth. Therefore, systems need to be identified that mimic the functions of saliva, in particular the salivary mucin MUC5B and the unique physiological properties of saliva. To this end, plant extracts known to contain hydrocolloid polysaccharides and to have mucus-forming properties were studied to evaluate their suitability as saliva substitutes. The aqueous plant extracts of Calendula officinalis, Fucus sp. thalli, and lichenan from Lichen islandicus were examined for composition using a range of techniques, including GC-MS, NMR, SEC, assessment of pH, osmolality, buffering capacity, viscoelasticity, viscoelastic interactions with human saliva, hydrocolloid network formation, and in vitro cell adhesion. For this purpose, a physiologically adapted adhesive test was developed using human buccal epithelial cells. The results show that lichenan is the most promising candidate to mimic the properties of MUC5B. By adjusting the pH, osmolality, and buffering capacity with K2HPO4, it was shown that lichenan exhibited high cell adhesion, with a maximum detachment force that was comparable to that of unstimulated whole mouth saliva.

Plasma and interstitial fluid antibiotic levels of subcutaneously implanted compounded florfenicol calcium sulfate beads in New Zealand White rabbits (Oryctolagus cuniculus).

To determine antibiotic levels in plasma and interstitial fluid (ISF) after SC placement of compounded florfenicol (FF) calcium sulfate beads (CSBs) in New Zealand White rabbits (Oryctolagus cuniculus). 6 juvenile female rabbits (n = 5 treatment and 1 control). An ultrafiltration probe and CSBs were placed SC in 6 rabbits (n = 5 for FF CSBs and 1 for control CSBs). Plasma (3, 6, 12, 24, and 48 hours and 7, 14, and 21 days) and ISF (daily for 21 days) samples were collected, and FF was measured by HPLC for pharmacokinetic analysis. Hematology, biochemistry, and histopathology were assessed. Means ± SD for the area under the curve, maximum concentration, time of maximum concentration, terminal half-life, and mean residence time to the last data point for plasma and ISF were 16.63 ± 8.16 and 17,902 ± 7,564 h·µg/mL, 0.79 ± 0.38 and 245 ± 223 µg/mL, 2.90 ± 0.3 and 59 ± 40 hours, 30.81 ± 16.9 and 27.3 ± 9.39 hours, 23.4 ± 10 and 73.7 ± 13 hours, respectively. Plasma FF was < 2 µg/mL at all time points. The ISF FF remained > 8 μg/mL for 109.98 to 231.58 hours. One rabbit death occurred during treatment, but the cause of death was undetermined. Local tissue inflammation was present, but no clinically significant systemic adverse effects were found on hematology, biochemistry, or histopathology in the remaining rabbits. Florfenicol CSBs maintained antibiotic concentrations in ISF at levels likely to be effective against bacteria sensitive to > 8 µg/mL for 5 to 10 days while maintaining low (< 2 µg/mL) plasma levels. Florfenicol CSBs may be effective for local antibiotic treatment in rabbit abscesses.

Estimating lags in a kraft mill

Abstract In pulp mills, lags obscure the effect of upstream operations on downstream measurements. Here, we estimate lags in a Canadian pulp mill using autoregressive exogenous (ARX) models. First, we show that ARX models can approximate lags in a process simulation that resembles the liquor storage tanks in pulp mills, a major source of lag in the kraft recovery cycle. Then, we use ARX models to estimate the lagged effect of a change in species pulped on as-fired liquor heating value, viscosity, and boiling point rise. Additionally, we compare the predictions of the ARX models to autoregressive (AR) models and a persistence model. The estimated lags between a change in species and heating value (49 h) and boiling point rise (41 h) agree with a detailed simulation of the mill and are close to estimated hydraulic residence times, suggesting that the liquor tanks exhibit imperfect mixing. A lagged effect of species change on viscosity could not be identified. ARX and AR models produce similar predictions that are slightly better than those of a persistence model. Finally, we show that process measurements upstream of units characterized by large residence times will likely provide little benefit to prediction accuracy.

An in-line dye tracer experiment to measure the residence time in continuous concrete processing

An in-line dye tracer experiment to measure the residence time in continuous concrete processing

Study of rutile TiO2(110) single crystal by transient absorption spectroscopy in the presence of Ce4+ cations in aqueous environment. Implication on water splitting

Ce4+ cations are commonly used as electron acceptors during the water oxidation to O2 reaction over Ir- and Ru-based catalysts. They can also be reduced to Ce3+ cations by excited electrons from the conduction band of an oxide semiconductor with a suitable energy level. In this work, we have studied their interaction with a rutile TiO2(110) single crystal upon band gap excitation by femtosecond transient absorption spectroscopy (TAS) in solution in the 350–900 nm range and up to 3.5 ns. Unlike excitation in the presence of water alone the addition of Ce4+ resulted in a clear ground-state bleaching (GSB) signal at the band gap energy of TiO2 (ca. 400 nm) with a time constant t = 4–5 ps. This indicated that the Ce4+ cations presence has quenched the e-h recombination rate when compared to water alone. In addition to GSB, two positive signals are observed and are attributed to trapped holes (in the visible region, 450–550 nm) and trapped electrons in the IR region (>700 nm). Contrary to expectation, the lifetime of the positive signal between 450 and 550 nm decreased with increasing concentrations of Ce4+. We attribute the decrease in the lifetime of this signal to electrostatic repulsion between Ce4+ at the surface of TiO2(110) and positively charged trapped holes. It was also found that at the very short time scale (<2–3 ps) the fast decaying TAS signal of excited electrons in the conduction band is suppressed because of the presence of Ce4+ cations. Results point out that the presence of Ce4+ cations increases the residence time (mobility) of excited electrons and holes at the conduction band and valence band energy levels (instead of being trapped). This might provide further explanations for the enhanced reaction rate of water oxidation to O2 in the presence of Ce4+ cations.

Inhalable spray-dried porous microparticles containing dehydroandrographolide succinate phospholipid complex capable of improving and prolonging pulmonary anti-inflammatory efficacy in mice.

Due to the unique physiological barriers within the lungs, there are considerable challenges in developing drug delivery systems enabling prolonged drug exposure to respiratory epithelial cells. Here, we report a PulmoSphere-based dry powder technology that incorporates a drug-phospholipid complex to promote intracellular retention of dehydroandrographolide succinate (DAS) in respiratory epithelial cells following pulmonary delivery. The DAS-phospholipid complex has the ability to self-assemble into nanoparticles. After spray-drying to produce PulmoSphere microparticles loaded with the drug-phospholipid complex, the rehydrated microparticles discharge the phospholipid complex without altering its physicochemical properties. The microparticles containing the DAS-phospholipid complex exhibit remarkable aerodynamic properties with a fine particle fraction of ∼ 60% and a mass median aerodynamic diameter of ∼ 2.3μm. These properties facilitate deposition in the alveolar region. In vitro cell culture and lung tissue explants experiments reveal that the drug-phospholipid complex prolongs intracellular residence time and lung tissue retention due to the slow intracellular disassociation of drug from the complex. Once deposited in the lungs, the DAS-phospholipid complex loaded microparticles increase and extend drug exposure to the lung tissues and the immune cells compared to the free DAS counterpart. The improved drug exposure to airway epithelial cells, but not immune cells, is related to a prolonged duration of pulmonary anti-inflammation at decreased doses in a mouse model of acute lung injury induced by lipopolysaccharide. Overall, the phospholipid complex loaded microparticles present a promising approach for improved treatment of respiratory diseases, e.g. pneumonia and acute respiratory distress syndrome.

Evaluation of the potential of activated sludge biomass from Nigeria as a feedstock for biodiesel production

AbstractDepleting fossil fuel reserves and the effects of greenhouse gases on climate change have led to the investigation of alternative energy sources such as biofuel, including biodiesel and renewable diesel. Unfortunately, the cost of the feedstock exceeds 70% of the total production cost. The current work investigates the potential of utilizing a waste product (activated sludge biomass) from wastewater treatment, as an alternative feedstock for biodiesel production. The activated sludge biomass was pretreated with subcritical water to enhance the lipid yield before extracting the lipid using solvent extraction. The result showed that lipid yield from the activated sludge was 4.73–8.58%. After subcritical water pretreatment with varying residence time, temperature, and biomass loading, the lipid yield increased by 158.04–400%. Gas chromatography–mass spectrometry (GC–MS) analysis of the fatty acid methyl esters (FAME) from the transesterification of the lipid extract using calcined egg shell as a catalyst identified the following lipids: triglyceride, fatty acids, sphingolipid, phospholipid, glycerolipid, glycerophospholipid, steroid, and cholesterol. The predominant lipid was triglyceride, and the high percentage of unsaturated fatty acids, including arachidonic acid (23.54%), eicosadienoic acid (8.37%), and oleic acid (6.23%) suggest that the lipid extract is a potential feedstock for biodiesel production.

Modeling of Unburned Carbon in Pulverized Coal-Fired Supercritical Steam Generators

ABSTRACT In coal-fired boilers, one of the most important metrics for optimizing combustion is the proportion of unburned carbon (UC) in the ash. In most Indian power plants, it is still assessed offline through manual sample collection and laboratory analysis. The laborious processes of sample collection, preparation, analysis, and reporting require at least five to eight hours of work. The delayed results may not be useful to optimize combustion in the boiler furnace, as the boiler operating conditions may be completely different from the conditions when the samples were collected. Instead, the use of prediction algorithms may bring timely corrective action if the UC goes high. The present experimental study is taken up to obtain a correlation between UC and corresponding relevant boiler operational parameters and on the residence time of coal particles in the boiler furnace. Multiple regression analysis is performed using ANOVA tools. One hundred and ninety-four sets of coal, ash samples and boiler operating parameters are collected from 07 supercritical units. Coal proximate, coal fineness and ash UC analysis are carried out. The analyzed results and collected boiler operational data are statistically analyzed using Microsoft Excel’s ANOVA tool to understand the dependent behavior of UC on the boiler operational parameters and fired coal characteristics. The empirical equations are proposed for the prediction of UC in bottom and fly ash for supercritical boilers. Additionally, fresh 20 sets of coal, ash samples, and related operating data are gathered for the validation of the proposed empirical equations. For additionally collected samples, the predicted results are compared with the offline measured laboratory results. The maximum deviation between the predicted and laboratory results are within the range of ± 0.40% and ± 0.24% for bottom and fly ash samples, respectively.

Integrated techno-economic and life cycle assessment of hydroformylation in microemulsion systems

This paper presents the first integrated techno-economic and life cycle assessment of microemulsion systems being applied for rhodium-catalyzed hydroformylation of long-chain alkenes at industrial scale. The case study describes a projected 150 kt/a production of tridecanal (US gulf coast, 2019). The industrial success of the hydroformylation of short-chain alkenes lies in the continuous recycling of the rhodium-containing water phase. Microemulsion systems can be applied to transfer this concept to long-chain alkenes by overcoming the miscibility gap between the aqueous catalyst phase and the unipolar alkene phase and, moreover, by generating a temperature-induced multi-phase system enabling the immobilization of the catalyst and its continuous recycling, as demonstrated in miniplant operations with dodecene and rhodium/SulfoXantPhos. Customizable simulation models have been developed for scale-up and assessment of the miniplant data. Surprisingly, a profitability-driven sensitivity study indicates a base case optimum at low residence time with low alkene conversion leading to large throughput streams and high raw material purge rates. The comparison to the industrial cobalt-based benchmark system shows an economic advantage regarding net present value (Rh: 68 M$; Co: 62 M$), while about half of the environmental indicators are in favor or equivalent. In a best-case scenario considering zero leaching of expensive rhodium the net present value increases by almost 40% accompanied by a shift to overall lower environmental impacts than the benchmark. In conclusion, the investigated miniplant data suggest microemulsion systems to be competitive when applied in continuous processes at a large scale.

A Sustainable and Cost‐Effective Bioadsorbent for the Removal of Allura Red from Contaminated Water

AbstractFood grade dyes pose severe health hazards when consumed in excessive amounts or enter body via contaminated water. Despite its harmful effects, Allura Red (AR) is very less explored dye for its removal, especially using agricultural/fruit waste. This study presents efficient removal of an important and unsafe food grade dye, AR via adsorption. Waste watermelon peel waste has been used for the first time for treatmenting wastewater contaminated with AR. Waste was converted to two types of adsorbents, with and without subjecting it to pyrolysis. Both the adsorbents were characterized for functionality and crystallinity and used for conducting adsorption studies. Removal of dye was evaluated by intrinsic strategy of monitoring the model solutions under pre‐ and post‐adsorption conditions. Removal percentage of dye was determined by calculating its initial (Co) and final (Cf) concentrations in solution using the formula (see Eq. (1)). Various reaction parameters important for adsorption, viz. pH, adsorbent dose, residence time, reaction temperature and particle size were optimized. Results indicate that ~80 % and &gt;92 % dye could be removed using 0.5 g/L adsorbent before and after pyrolysis respectively in 3.5 h from its 2 ppm concentration in modelled water.

Coupling of surface plasmon resonance and mass spectrometry for molecular interaction studies in drug discovery.

Various analytical technologies have been developed for the study of target-ligand interactions. The combination of these technologies gives pivotal information on the binding mechanism, kinetics, affinity, residence time, and changes in molecular structures. Mass spectrometry (MS) offers structural information, enabling the identification and quantification of target-ligand interactions. Surface plasmon resonance (SPR) provides kinetic information on target-ligand interaction in real time. The coupling of MS and SPR complements each other in the studies of target-ligand interactions. Over the last two decades, the capabilities and added values of SPR-MS have been reported. This review summarizes and highlights the benefits, applications, and potential for further research of the SPR-MS approach.

Argon admixture-driven enhanced ionization and performance of a 5 kW Hall thruster on krypton

Utilizing alternative propellants has been recognized as a strategy to reduce the total cost of propellants in electric propulsion-based missions. The aim of this study is to quantify the Hall effect thruster (HET) performance and operating characteristics using a Kr–Ar mixture to enable mission designers to evaluate the impact on mission and spacecraft design. We present the performance and plume plasma properties of the P5 5 kW-class HET operated with a Kr–Ar mixture with Ar volumetric flow rate fractions from 0 to 100%. The thruster is characterized at discharge power levels of 2.6 kW and 4.1 kW at constant discharge current and voltage over the range of Ar fractions. Despite higher ionization energy and lower mass of Ar, the thruster exhibited a similar level of thrust within 2% when comparing the pure Kr and 26%-Ar mixture cases. The derived ion energy distribution functions and analytical modeling suggest that the characteristic length for the ionization region is extended as the Ar fraction increases. The increased residence time of Kr at the extended ionization region and background energetic electrons from the ionized Ar neutrals are considered to cause this enhanced ionization of the injected Kr neutrals. This leads to a 6% higher Kr ion density at the 26%-Ar case even at the 16% less injected Kr neutral density than in the pure Kr case. The enhanced Kr ionization and generated Ar ions in the 26%-Ar case consequently led to a comparable thrust with that of the pure Kr case. The study indicates that mixing Ar with approximately 26% volumetrically with Kr can provide a similar or even higher thrust performance at the same discharge power. This will be particularly advantageous for various space missions that require high impulses by reducing the total cost of the propellant.

Making 2‐D Materials Mechanochemically by Twin‐Screw Extrusion: Continuous Exfoliation of Graphite to Multi‐Layered Graphene

AbstractMechanochemistry has developed rapidly in recent years for efficient chemicals and materials synthesis. Twin screw extrusion (TSE) is a particularly promising technique in this regard because of its continuous and scalable nature. A key aspect of TSE is that it provides high shear and mixing. Because of the high shear, it potentially also offers a way to delaminate 2‐D materials. Indeed, the synthesis of 2‐D materials in a scalable and continuous manor remains a challenge in their industrialization. Here, as a proof‐of‐principle, the automated, continuous mechanochemical exfoliation of graphite to give multi‐layer graphene (MLG, ≈6 layers) by TSE is demonstrated. To achieve this, a solid‐and‐liquid‐assisted extrusion (SLAE) process is developed in which organic additives such as pyrene are rendered liquid due to the high temperatures used, to assist with the exfoliation, and simultaneously solid sodium chloride is used as a grinding aid. This gave MLG in high yield (25 wt%) with a short residence time (8 min) and notably with negligible evidence for structural deterioration (defects or oxidation).

Dietary and homeostatic controls of Zn isotopes in rats: A controlled-feeding experiment and modelling approach.

The stable isotope composition of zinc (δ66Zn), which is an essential trace metal for many biological processes in vertebrates, is increasingly used in ecological, archeological, and paleontological studies to assess diet and trophic level discrimination among vertebrates. However, the limited understanding of dietary controls and isotopic fractionation processes on Zn isotope variability in animal tissues and biofluids limits precise dietary reconstructions. The current study systematically investigates the dietary effects on Zn isotope composition in consumers using a combined controlled-feeding experiment and box-modelling approach. For this purpose, 21 rats were fed one of seven distinct animal- and plant-based diets and a total of 148 samples including soft and hard tissue, biofluid, and excreta samples of these individuals were measured for δ66Zn. Relatively constant Zn isotope fractionation is observed across the different dietary groups for each tissue type, implying that diet is the main factor controlling consumer tissue δ66Zn values, independent of diet composition. Furthermore, a systematic δ66Zn diet-enamel fractionation is reported for the first time, enabling diet reconstruction based on δ66Zn values from tooth enamel. In addition, we investigated the dynamics of Zn isotope variability in the body using a box-modelling approach, providing a model of Zn isotope homeostasis and inferring residence times, while also further supporting the hypothesis that δ66Zn values of vertebrate tissues are primarily determined by that of the diet. Altogether this provides a solid foundation for refined (paleo)dietary reconstruction using Zn isotopes of vertebrate tissues.

A constrained machine learning surrogate model to predict the distribution of water-in-oil emulsions in electrostatic fields

Accurately describing the evolution of water droplet size distribution in crude oil is fundamental for evaluating the water separation efficiency in dehydration systems. Enhancing the separation of an aqueous phase dispersed in a dielectric oil phase, which has a significantly lower dielectric constant than the dispersed phase, can be achieved by increasing the water droplet size through the application of an electrostatic field in the pipeline. Mathematical models, while being accurate, are computationally expensive. Herein, we introduced a constrained machine learning (ML) surrogate model developed based on a population balance model. This model serves as a practical alternative, facilitating fast and accurate predictions. The constrained ML model, utilizing an extreme gradient boosting (XGBoost) algorithm tuned with a genetic algorithm (GA), incorporates the key parameters of the electrostatic dehydration process, including droplet diameter, voltage, crude oil properties, temperature, and residence time as input variables, with the output being the number of water droplets per unit volume. Furthermore, we modified the objective function of the XGBoost algorithm by incorporating two penalty terms to ensure the model’s predictions adhere to physical principles. The constrained model demonstrated accuracy on the test set, with a mean squared error of 0.005 and a coefficient of determination of 0.998. The efficiency of the model was validated through comparison with the experimental data and the results of the population balance mathematical model. The analysis shows that the initial droplet diameter and voltage have the highest influence on the model, which aligns with the observed behaviour in the real-world process.

How quickly does wood fragment in rivers? Methodological challenges, preliminary findings, and perspectives

AbstractLarge wood plays a significant role in fluvial ecosystems, influencing river geomorphology and ecology. However, it poses both benefits to river systems and risks, making it essential to understand its dynamics for effective management. A better understanding the wood breakdown process is required to evaluate the flood risk of wood in rivers. This paper aims to evaluate early‐stage fragmentation of wood in rivers after being recruited through bank erosion, taking into account its mobility and residence time. Two methods for characterising and monitoring wood fragmentation are suggested and compared: 1) photo‐interpretation based on ground and drone photo and 2) terrestrial LiDAR. We used Quantitative Structure Modelling (QSM) of point clouds to accurately simulate the full branching structure of trees. Close relationships exist between photo‐interpreted and LiDAR‐derived complexity metrics, but a scaled parameter (i.e., diameter) is needed to correlate branching complexity with volume. The debranching process occurs quickly, with a median reduction in branching complexity of over 80% within the initial 2 years. Further research with a larger sample size is necessary to investigate the impact of context – including transportation, submersion, accumulation, and isolation of wood pieces – on the fragmentation process. Field observations indicate that immobile wood pieces can experience a rapid reduction in their branching complexity, similar to the ones that are transported. Partial fine branching structure can be maintained on transported pieces. Both photo‐interpretation and terrestrial LiDAR offer complimentary approaches to monitoring wood fragmentation. Photo‐interpretation is easily implementable and may be used as a proxy for mechanical fragmentation, while terrestrial LiDAR may be used to monitor 3D wood fragmentation, volume and length evolution, following QSM modelling.

Design and Evaluation of Gastro-Retentive Floating Tablets of Ibandronic acid

The objective of this study is Preparation and evaluation of gastro-retentive floating tablets of Ibandronic acid by direct compression method polymers or combination. In this study, Ibandronic acid, the most commonly used biphosphonate for treating osteoporosis, was formulated as gastro retentive dosage form (GRDF) tablets to enhance its oral bioavailability. GRDDs are an approach to prolong gastric residence time, there by targeting site-specific drug release in the upper GIT for local or systemic effect. GRDF tablets of Ibandronic acid (200 mg) were characterized with the effects of Carbopol 934P, HPMC 4KM and Na-CMC at various ratios on swelling, floating, physical integrity. A prolonged dissolution profile of Ibandronic acid GRDF tablets developed in this study was observed for its thickness, friability, hardness, drug content and in-vitro drug release. Formulated Floating tablets of Ibandronic acid gave satisfactory results for various physicochemical parameters like hardness, friability, thickness, weight variation and content uniformity. Sodium bicarbonate has predominant effect on the buoyancy lag time, while HPMC K4M has predominant effect on total floating time and drug release. From the study it is evident that a promising controlled release floating tablets of Ibandronic acid can be developed to increase gastric residence time and thereby increasing its bioavailability. Both doses significantly reduced the occurrence risk of new vertebral fractures by 50–52 percent when compared to the effects of the placebo drug. Keywords: Gastro retention, Ibandronic acid, floating tablet, Carbopol, GRDF, GRFT.