Repair Of Abdominal Wall Defects Research Articles

Spatiotemporal delivery of microenvironment responsive hydrogel incorporated with stem cells-loaded porous microspheres for abdominal wall repair

Healing the wounds of abdominal wall defects characterised by severe complications represents a significant clinical challenge. Mesenchymal stem cells (MSC)-based therapies have emerged as a promising strategy for tissue regeneration. However, the low engraftment and survival rates limit their application owing to the complicated wound microenvironment and large wound areas in abdominal wall defects. Inspired by focal biointerfaces, the present research engineered a spatiotemporal delivery microenvironment-responsive therapeutic platform, termed MSC-GSM@HG, for abdominal wall repair. The constructed platform proved capable of dissolving HA-PBA/Gel-DA (HG) hydrogels in response to in vivo inflammatory responses and subsequently releasing MSC-laden gelatine and silk fibroin microspheres (GSMs). Meanwhile, the HG hydrogels can not only protect the MSCs from excessive reactive oxygen species but also exhibit haemostatic and anti-inflammatory properties. Strikingly, this microsphere-releasing hydrogel platform actively enhanced the repair of abdominal wall defects in vivo, by reducing inflammatory response, facilitating angiogenesis and promoting collagen deposition. Therefore, the microenvironment-responsive platform represents a promising strategy for MSC-based therapies for abdominal wall defects through spatiotemporal delivery mechanisms.

Surgical anatomy of transversus abdominis muscle for transversus abdominis release.

Transversus abdominis release (TAR) is a myofascial release technique which helps in surgical repair of large ventral abdominal wall defects. In this procedure, the medial margin of muscular part of transversus abdominis (TA) is of great importance. Hence, the authors sought to describe the extent of medial margin of TA muscle. The surgical steps of TAR were performed in 10 formalin-fixed cadavers and distance between medial margin of TA muscle, lateral margin of rectus abdominis, to linea alba at five anatomical levels were documented respectively. The distance between the inferior epigastric vessels and the medial border of TA muscle was also noted. The TA muscle was within the posterior rectus sheath in all cadavers, at the xiphisternum (R, 61.6 mm; L, 58.9 mm), and at midway between xiphisternum and umbilicus (R, 25.4 mm; L, 27.1 mm). The TA muscle exited the posterior rectus sheath between this point and the umbilicus. The mean incongruity at the next three levels were -24.6 mm, -24.9 mm, and -22.9 mm respectively on the right and -21.4 mm, -19.9 mm, and -18.9 mm respectively on the left. The mean distance between the medial border of TA and inferior epigastric vessels was 18.9 mm on the right and 17.2 mm on the left. The muscular part of TA was incorporated within the posterior rectus sheath above the umbilicus, and it completely exited the rectus sheath at the umbilicus. This is contrary to the traditional understanding of posterior rectus sheath formation.

Remodeling and Regenerative Properties of Fully Absorbable Meshes for Abdominal Wall Defect Repair: A Systematic Review and Meta-Analysis of Animal Studies.

Fully absorbable meshes can repair abdominal wall defects and effectively reduce the incidence of complications, but different types of fully absorbable meshes have different remodeling and regeneration effects. In order to investigate and compare the effects of different fully absorbable meshes on remodeling and regeneration in animals and reduce the biological risk of clinical translation, SYRCLE was adopted to evaluate the methodological quality of the included studies, and GRADE and ConQual were used to evaluate the quality of evidence. According to the inclusion and exclusion criteria, a total of 22 studies related to fully absorbable meshes were included in this systematic review. These results showed that fiber-based synthetic materials and fiber-based natural materials exhibited better restorative and regenerative effects indicated by infiltration and neovascularization, when compared with a porcine acellular dermal matrix. In addition, the human acellular dermal matrix was found to have a similar regenerative effect on the host extracellular matrix and scaffold degradation compared to the porcine acellular dermal matrix, porcine intestinal submucosa, and fiber-based natural materials, but it offered higher tensile strength than the other three. The quality of the evidence in this field was found to be poor. The reasons for downgrading were analyzed, and recommendations for future research included more rigor in study design, more transparency in result reporting, more standardization of animal models and follow-up time for better evaluation of the remodeling and regenerative performance of abdominal wall hernia repair meshes, and less biological risk in clinical translation.

Durable and Robust Antibacterial Polypropylene Hernia Mesh for Abdominal Wall Defect Repair.

Polypropylene (PP) mesh is commonly used in repairing abdominal wall hernia (AWH). However, the use of synthetic prosthesis comes with the risk of developing a prosthetic infection, resulting in delayed healing, secondary surgery, and potentially increased mortality. To address these issues, a facile surface functionalization strategy for PP mesh based on phytic acid (PA) and polyhexamethylene guanidine (PHMG) was constructed through a one-step co-deposition process, referred to as the PA/PHMG coating. The development of PA/PHMG coating is mainly attributed to the surface affinity of PA and the electrostatic interactions between PA and PHMG. The PA/PHMG coating could be completed within 4 h under mild conditions. The prepared PA/PHMG coatings on PP mesh surfaces exhibited desirable biocompatibility toward mammalian cells and excellent antibacterial properties against the notorious "superbug" methicillin-resistant Staphylococcus aureus (MRSA) and tetracycline-resistant Escherichia coli (TRE). The PA/PHMG-coated PP meshes showed killing ratios of over 99% against MRSA in an infected abdominal wall hernia repair model. Furthermore, histological and immunohistochemical analysis revealed a significantly attenuated degree of neutrophil infiltration in the PA/PHMG coating group, attributed to the decreased bacterial numbers alleviating the inflammatory response at the implant sites. Meanwhile, the pristine PP and PA/PHMG-coated meshes showed effective tissue repair, with the PA/PHMG coating group exhibiting enhanced angiogenesis compared with pristine PP meshes, suggesting superior tissue restoration. Additionally, PP meshes with the highest PHMG weight ratio (PA/PHMG(3)) exhibited excellent long-term robustness under phosphate-buffered saline (PBS) immersion with a killing ratio against MRSA still exceeding 95% after 60 days of PBS immersion. The present work provides a facile and promising approach for developing antibacterial implants.

Recent Advances in Functional Hydrogel for Repair of Abdominal Wall Defects: A Review

Recent Advances in Functional Hydrogel for Repair of Abdominal Wall Defects: A Review

Asymmetric porous composite hydrogel patch for microenvironment-adapted repair of contaminated abdominal wall defects

Effective antibacterial property and long-term mechanical support are essential for the repair of complex abdominal wall defects associated with infection. However, clinically available repair materials often fail to meet these requirements, resulting in high surgical failure rate and complications. In this study, an asymmetric porous composite hydrogel patch (cCS/PVA@BAC) with antibacterial, anti-adhesion, pro-healing, and durable mechanical support properties is designed for the efficient repair of contaminated abdominal wall defects. By stepwise phase-conversion and soaking method, robust and stable polyvinyl alcohol hydrogel (PVAH) is integrated with the biocompatible multicomponent hydrogel made of chitosan and carboxymethyl chitosan (cCS), and benzalkonium chloride (BAC) is loaded to enhance the antibacterial property. The cCS layer of cCS/PVA@BAC has an extracellular matrix-like porous structure, which can promote fibroblasts adhesion and wound healing. In contrast, the PVAH layer on the other side with a smooth and dense structure, which can reduce fibroblasts adhesion and prevent visceral adhesion. In addition, the composite hydrogel patch has good anti-swelling and anti-deformation properties as well as stable mechanical strength, thus can withstand high intraperitoneal pressure in the wet internal microenvironment. The loaded BAC can efficiently kill bacteria and improve the local inflammatory microenvironment. With these advantages, cCS/PVA@BAC can significantly reduce inflammation, promote tissue remodeling, and accelerate the healing of contaminated abdominal wall defects in the rat model. These findings suggest a potential use of multifunctional hydrogel patch as an ideal material for effective repair of contaminated soft tissue defects.

Double-Layer Asymmetric Porous Mesh with Dynamic Mechanical Support Properties Enables Efficient Single-Stage Repair of Contaminated Abdominal Wall Defect.

Contamination tolerance and long-term mechanical support are the two critical properties of meshes for contaminated abdominal wall defect repair. However, biological meshes with excellent pollution tolerance fail to provide bio-adaptive long-term mechanical support due to their rapid degradation. Here, a novel double-layer asymmetric porous mesh (SIS/PVA-EXO) is designed by simple and efficient in situ freeze-thaw of sticky polyvinyl alcohol (PVA) solution on the loosely porous surface of small intestinal submucosal decellularized matrix (SIS), which can successfully repair the contaminated abdominal wall defect with bio-adaptive dynamic mechanical support through only single-stage surgery. The exosome-loaded degradable loosely porous SIS layer accelerates the tissue healing; meanwhile, the exosome-loaded densely porous PVA layer can maintain long-term mechanical support without any abdominal adhesion. In addition, the tensile strength and strain at break of SIS/PVA-EXO mesh change gradually from 0.37MPa and 210% to 0.10MPa and 385% with the degradation of SIS layer. This unique performance can dynamically adapt to the variable mechanical demands during different periods of contaminated abdominal wall reconstruction. As a result, this SIS/PVA-EXO mesh shows an attractive prospect in the treatment of contaminated abdominal wall defect without recurrence by integrating local immune regulation, tissue remodeling, and dynamic mechanical supporting.

Injectable Double Crosslinked Hydrogel-Polypropylene Composite Mesh for Repairing Full-Thickness Abdominal Wall Defects.

Abdominal wall defects are common clinical diseases, and mesh repair is the standard treatment method. The most commonly used polypropylene (PP) mesh in clinical practice has the advantages of good mechanical properties, stable performance, and effective tissue integration effect. However, direct contact between abdominal viscera and PP mesh can lead to severe abdominal adhesions. To prevent this, the development of a hydrogel-PP composite mesh with anti-adhesive properties may be an effective measure. Herein, biofunctional hydrogel loaded with rosmarinic acid is developed by modifying chitosan and Pluronic F127, which possesses suitable physical and chemical properties and commendable in vitro biocompatibility. In the repair of full-thickness abdominal wall defects in rats, hydrogels are injected onto the surface of PP mesh and applied to intraperitoneal repair. The results indicate that the use of hydrogel-PP composite mesh can alleviate abdominal adhesions resulting from traditional PP mesh implantation by decreasing local inflammatory response, reducing oxidative stress, and regulating the fibrinolytic system. Combined with the tissue integration ability of PP mesh, hydrogel-PP composite mesh has great potential for repairing full-thickness abdominal wall defects.

Designing a bi-layer multifunctional hydrogel patch based on polyvinyl alcohol, quaternized chitosan and gallic acid for abdominal wall defect repair

In abdominal wall defect repair, surgical site infection (SSI) remains the primary cause of failure, while complications like visceral adhesions present significant challenges following patch implantation. We designed a Janus multifunctional hydrogel patch (JMP) with antibacterial, anti-inflammatory, and anti-adhesive properties. The patch comprises two distinct layers: a pro-healing layer and an anti-adhesion layer. The pro-healing layer was created by a simple mixture of polyvinyl alcohol (PVA), quaternized chitosan (QCS), and gallic acid (GA), crosslinked to form PVA/QCS/GA (PQG) hydrogels through GA's self-assembly effect and hydrogen bonding. Additionally, the PVA anti-adhesive layer was constructed using a drying-assisted salting method, providing a smooth and dense physical barrier to prevent visceral adhesion while offering essential mechanical support to the abdominal wall. The hydrogel patch demonstrates widely adjustable mechanical properties, exceptional biocompatibility, and potent antimicrobial properties, along with a sustained and stable release of antioxidants. In rat models of skin and abdominal wall defects, the JMP effectively promoted tissue healing by controlling infection, inhibiting inflammation, stimulating neovascularization, and successfully preventing the formation of visceral adhesions. These compelling results highlight the JMP's potential to improve the success rate of abdominal wall defect repair and reduce surgical complications.

Ibuprofen-loaded bilayer electrospun mesh modulates host response toward promoting full-thickness abdominal wall defect repair.

Pro-inflammatory response impairs the constructive repair of abdominal wall defects after mesh implantation. Electrospinning-aid functionalization has the potential to improve the highly orchestrated response by attenuating the over-activation of foreign body reactions. Herein, we combined poly(L-lactic acid-co-caprolactone) (PLLA-CL) with gelatin proportionally via electrospinning, with Ibuprofen (IBU) incorporation to fabricate a bilayer mesh for the repair improvement. The PLLA-CL/gelatin/IBU (PGI) mesh was characterized in vitro and implanted into the rat model with a full-thickness defect for a comprehensive evaluation in comparison to the PLLA-CL/gelatin (PG) and off-the-shelf small intestinal submucosa (SIS) meshes. The bilayer PGI mesh presented a sustained release of IBU over 21 days with degradation in vitro and developed less-intensive intraperitoneal adhesion along with a histologically weaker inflammatory response than the PG mesh after 28 days. It elicited an M2 macrophage-dominant foreign body reaction within the process, leading to a pro-remodeling response similar to the biological SIS mesh, which was superior to the PG mesh. The PGI mesh provided preponderant mechanical supports over the SIS mesh and the native abdominal wall with similar compliance. Collectively, the newly developed mesh advances the intraperitoneal applicability of electrospun meshes by guiding a pro-remodeling response and offers a feasible functionalization approach upon immunomodulation.

Bioactive microgel-coated electrospun membrane with cell-instructive interfaces and topology for abdominal wall defect repair.

Current mesh materials used for the clinical treatment of abdominal defects struggle to balance mechanical properties and bioactivity to support tissue remodeling. Therefore, a bioactive microgel-coated electrospinning membrane was designed with the superiority of cell-instructive topology in guiding cell behavior and function for abdominal wall defect reconstruction. The electrostatic spinning technique was employed to prepare a bioabsorbable PLCL fiber membrane with an effective mechanical support. Additionally, decellularized matrix (dECM)-derived bioactive microgels were further coated on the fiber membrane through co-precipitation with dopamine, which was expected to endow cell-instructive hydrophilic interfaces and topological morphologies for cell adhesion. Moreover, the introduction of the dECM into the microgel promoted the myogenic proliferation and differentiation of C2C12 cells. Subsequently, in vivo experiments using a rat abdominal wall defect model demonstrated that the bioactive microgel coating significantly contributed to the reconstruction of intact abdominal wall structures, highlighting its potential for clinical application in promoting the repair of soft tissue defects associated with abdominal wall damage. This study presented an effective mesh material for facilitating the reconstruction of abdominal wall defects and contributed novel design concepts for the surface modification of scaffolds with cell-instructive interfaces and topology.

A Review of Advanced Abdominal Wall Hernia Patch Materials.

Tension-free abdominal wall hernia patch materials (AWHPMs) play an important role in the repair of abdominal wall defects (AWDs), which have a recurrence rate of <1%. Nevertheless, there are still significant challenges in the development of tailored, biomimetic, and extracellular matrix (ECM)-like AWHPMs that satisfy the clinical demands of abdominal wall repair (AWR) while effectively handling post-operative complications associated with abdominal hernias, such as intra-abdominal visceral adhesion and abnormal healing. This extensive review presents a comprehensive guide to the high-end fabrication and the precise selection of these advanced AWHPMs. The review begins by briefly introducing the structures, sources, and properties of AWHPMs, and critically evaluates the advantages and disadvantages of different types of AWHPMs for AWR applications. The review subsequently summarizes and elaborates upon state-of-the-art AWHPM fabrication methods and their key characteristics (e.g., mechanical, physicochemical, and biological properties in vitro/vivo). This review uses compelling examples to demonstrate that advanced AWHPMs with multiple functionalities (e.g., anti-deformation, anti-inflammation, anti-adhesion, pro-healing properties, etc.) can meet the fundamental clinical demands required to successfully repair AWDs. In particular, there have been several developments in the enhancement of biomimetic AWHPMs with multiple properties, and additional breakthroughs are expected in the near future.

Abdominal wall defect repair with component separation technique for giant omphalocele with previous relaxing incisions on the abdominal skin

BackgroundThe repair of large abdominal wall defects that cannot be closed primarily is quite challenging. The component separation technique (CST) is a surgical approach using autologous tissue to close large abdominal wall defects. The CST requires extensive dissection between the abdominal skin and the anterior sheath of the rectus abdominis muscle. Subsequently, incisions are made at both sides of the external oblique aponeurosis, releasing the external oblique muscle from the internal oblique muscle, and then the right and left rectus abdominis muscles are brought together in the midline for defect closure. However, impairment of blood flow in the abdominal wall skin and necrotic changes are recognized as potential complications.Case presentationThe CST was performed in a 4-year-old boy with a large ventral hernia who had undergone skin closure with abdominal wall relaxing incisions for the primary treatment of giant omphalocele in the neonatal period. Given his history of incisions on the abdominal wall, he was speculated to be at high risk for postoperative skin ischemia. Dissection was therefore kept to a minimum to preserve the blood supply from the superior and inferior epigastric arteries and perforating branches of those arteries through the rectus abdominis muscle. In addition, care was taken to adjust the muscle relaxant dosage while monitoring the intravesical pressure, ensuring that it did not exceed 20 mmHg to avoid impaired circulation in the abdominal wall caused by abdominal compartment syndrome. He was discharged 23 days after the surgery without any complications, and neither recurrence of the ventral hernia nor bowel obstruction was observed in 4 years.ConclusionsA giant omphalocele with primary skin closure was treated by applying the CST. The procedure can be performed safely while preserving the blood flow to the abdominal wall, even in patients with a history of relaxing incisions on the abdominal skin. The CST is expected to be effective for repairing the large abdominal wall defects seen in giant omphalocele when primary closure is not possible.

Multifunctional Fluorinated Lubricant Infused Poly(4-hydroxybutyrate) (P4HB) Membranes for Full Thickness Abdominal Wall Defect Repair.

Abdominal wall defect caused by surgical trauma, congenital rupture, or tumor resection may result in hernia formation or even death. Tension-free abdominal wall defect repair by using patches is the gold standard to solve such problems. However, adhesions following patch implantation remain one of the most challenging issues in surgical practice. The development of new kinds of barriers is key to addressing peritoneal adhesions and repairing abdominal wall defects. It's already well recognized that ideal barrier materials need to have good resistance to nonspecific protein adsorption, cell adhesion, and bacterial colonization for preventing the initial development of adhesion. Herein, electrospun poly(4-hydroxybutyrate) (P4HB) membranes infused with perfluorocarbon oil were used as physical barriers. The oil-infused P4HB membranes can greatly prevent protein attachment and reduce blood cell adhesion in vitro. We further showed that the perfluorocarbon oil-infused P4HB membranes can reduce bacterial colonization. The in vivo study revealed that perfluoro-(decahydronaphthalene) infused P4HB membranes can significantly prevent peritoneal adhesions in the classic abdominal wall defects model and accelerate defect repair, as evidenced by gross examination and histological evaluation. This work provides a safe fluorinated lubricant-impregnated P4HB physical barrier to inhibit the formation of postoperative peritoneal adhesions and efficiently repair soft-tissue defects. This article is protected by copyright. All rights reserved.

V-025 ETEP-RS: EXTENDED TOTALLY EXTRAPERITONEAL RIVES-STOPPA TECHNIQUE FOR SMALL VENTRAL HERNIA

Abstract Aim The aim is to describe the laparoscopic surgical technique of eTEP with 3 trocars from the upper port in a 52-year-old male patient who presented 3 small ventral hernias Material &amp; Methods Recently, the surgical technique of ventral hernia repair, Rives-Stoppa e-TEP eventroplasty (eTEP-RS) has been introduced. First, 2 subcostal incisions are made. By introducing the dissector balloon through both retromuscular spaces up to the linea arcuata, the retromuscular space is exposed. Great care must be taken to preserve the neurovascular bundles at semilunar line. A 5mm trocar is placed on the right flank to perfom the epigastric crossover maniobre by incising the medial aspect of rigth posterior sheath. The dissection of the left retromuscular space is performed. The midline dissection is progressed to the retzius, completing the Rives retromuscular space. The hernia sacs are dissected and reduced. Finally, posterior rectus sheaths and the linea alba are sutured with 2/0 absorbable self-locking continuous barb suture and a mesh is placed in the retromuscular space. Results The patient was discharged the next postoperative day with good pain control. To date, he does not present data on hernia recurrence. Conclusions The repair of abdominal wall defects via endoscopic eTEP Rives-Stoppa with three trocars is a feasible and reproducible technique that meets the criteria of ideal open surgery and is safe for the patient. In addition, it offers advantages such as less postoperative pain, less need for analgesia, favors rapid and safe recovery, added to an excellent aesthetic result.

Minimally invasive approach to incisional hernia in elective and emergency surgery: a SICE (Italian Society of Endoscopic Surgery and new technologies) and ISHAWS (Italian Society of Hernia and Abdominal Wall Surgery) online survey.

Minimally invasive abdominal wall surgery is growing worldwide, with a constant and fast improvement of surgical techniques and surgeons' confidence in treating both primary and incisional hernias (IH). The Italian Society of Endoscopic Surgery and new technologies (SICE) and the ISHAWS (Italian Society of Hernia and Abdominal Wall Surgery) worked together to investigate state of the art in IH treatment in elective and emergency settings in Italy. An online open survey was designed, and Italian surgeons interested in abdominal wall surgery were invited to fill out a 20-point questionnaire on IH surgical procedures performed in their departments. Surgeons were asked to express their points of view on specific questions about technical and clinical variables in IH treatment. Preferred approach in elective IH surgery was minimally invasive (59.7%). Open surgery was the preferred approach in 40.3% of the responses. In emergency settings, open surgery was the preferred approach (65.4%); however, 34.5% of the involved surgeons declare to prefer the laparoscopic/endoscopic approach. Most respondents opted for conversion to open surgery in case of relevant surgical field contamination, with a non-mesh repair of abdominal wall defects. Among those that used the laparoscopic approach in the emergent setting, the majority (74%) used the size of the defect of 5cm as a decisional cut-off. The spread of minimally invasive approaches to IH repair in emergency surgery in Italy is gaining relevance. Code-sharing through scientific societies can improve clinical practice in different departments and promote a tailored approach to IH surgery.

Tissue-Adhesive Decellularized Extracellular Matrix Patches Reinforced by a Supramolecular Gelator to Repair Abdominal Wall Defects.

Implantation of surgical meshes composed of synthetic and biological materials has been applied for abdominal wall defect repair. Despite many efforts, there are no reliable meshes that fully satisfy clinical requirements because of their lack of biodegradability, mechanical strength, and tissue-adhesive properties. Here, we report biodegradable, decellularized extracellular matrix (dECM)-based biological patches to treat abdominal wall defects. By incorporating a water-insoluble supramolecular gelator that forms physical cross-linking networks through intermolecular hydrogen bonding, dECM patches were reinforced to improve mechanical strength. Reinforced dECM patches possessed higher tissue adhesion strength and underwater stability compared with the original dECM because of enhanced interfacial adhesion strength. In vivo experiments using an abdominal wall defect rat model showed that reinforced dECM patches induced collagen deposition and the formation of blood vessels during material degradation, and the accumulation of CD68-positive macrophages was suppressed compared to nonbiodegradable synthetic meshes. Tissue-adhesive and biodegradable dECM patches with improved mechanical strength by a supramolecular gelator have enormous potential for use in the repair of abdominal wall defects.

Repair of a complex abdominal wall defect with anterolateral thigh flap: a good surgical alternative

Repair of a complex abdominal wall defect with anterolateral thigh flap: a good surgical alternative

Reconstruction of Abdominal Wall Defect with Composite Scaffold of 3D Printed ADM/PLA in a Rat Model.

Abdominal wall defects are a frequently occurring condition in surgical practice. The most important are material structure and biocompatibility. In this study, polylactic acid (PLA) mesh composited with a 3D printing of acellular dermal matrix (ADM) material is used to repair abdominal wall defects. The results show that the adhesion score of ADM/PLA composite scaffolds is smaller than PLA meshes. Immunohistochemical assessment reveals that the ADM/PLA composite scaffold can effectively reduce the inflammatory response at the contact surface between the meshes and the abdominal organs. And the ADM/PLA composite scaffold can effectively reduce the expression levels of the inflammation-related factors IL-6 and IL-10. In addition, the ADM/PLA composite scaffold repair is rich in the expression levels of tissue regeneration-related factors vascular endothelial growth factor and transforming growth factor β. Thus, ADM/PLA composite scaffolds can effectively reduce surrounding inflammation to effectively promote the repair of abdominal wall defects.

Impact of combined component separation technique and shoelace repair on big medline abdominal wall defect

BackgroundClosure of large anterior abdominal wall defects, regardless of their etiology, is challenging. There is no standardized information describing definitive management. Therefore, we conducted this study to illustrate our experience on large midline abdominal wall defect repair using an effective modified reconstructive technique. MethodsThis retrospective study was conducted at Al Naqib Hospital in Aden/Yemen between 2012 and 2019. Twenty-six patients with large midline abdominal wall defects of various etiologies underwent surgical repair using a combination of shoelace repair and the component separation technique. The procedure involved bilateral longitudinal division of the anterior rectus sheet and creation of a posterior layer by approximation of the medial edges of the divided rectus sheet (shoelace abdominoplasty) and anterior external oblique muscle aponeurosis separation (component separation technique) to approximate the lateral edges of the divided rectus sheet and move the rectus muscles toward the midline for constructing the anterior abdominal wall layer. The posterior and anterior layers and bilateral separated sheets were covered with a polypropylene mesh in all patients, except in those who underwent emergency damage control surgery. ResultsFour, one, and two patients developed seroma, skin necrosis and chronic pain, and post-surgical wound infection, respectively. No recurrent herniation was recorded during the median follow-up of 5 years. ConclusionThis technique is effective in restoring the integrity of the abdominal wall in large midline abdominal wall defects and has an acceptable aesthetic appearance. In our study, minimal complications were reported, and no cases of recurrent hernias were diagnosed during follow-up.