Noise Artifact Removal Research Articles

Automated Skin Lesion Preprocessing Model of Dermoscopic Images Towards Melanoma Detection

Melanoma is lethal form of skin cancer. For unbiased diagnosis of melanoma skin cancer an automated and computerized image analysis system is prime requirement. Clinicians examine the digital photographs taken from dermoscopy lens to detect skin cancer. The images captured usually contains various noise artifacts like low contrast hair objects, ink markers, vignette effect, ebony frames. These artifacts often affect results of skin lesion segmentation and lesion classification analysis. In this paper, we propose an automated image pre-processing model to remove noise artifacts like thin & thick hair objects, surgical ink markers, dark vignette effect, ebony frames from the images. To segment required lesion region and detect lesion edges we applied Otsu thresholding and Canny edge technique. We also applied these techniques on preprocessed image and original image with noise artifacts to check the efficiency of our model. We discuss various methodologies and results acquired at each phase. Based on the experimental results, the proposed model can be used successfully in removal of noise artifacts from dermoscopic images. In future, it can be used to build a reliable and accurate computer aided diagnostic systems.

Development of a novel algorithm for metal artifact reduction in digital tomosynthesis using projection-based dual-energy material decomposition for arthroplasty: A phantom study

In this study, a novel dual-energy (DE) material decomposition reconstruction algorithm (DEMDRA) was developed using projection data with the aim of reducing metal artifacts during digital tomosynthesis (DT) for implants. Using the three-material decomposition method and decomposition projection data specific for each material, a novel DEMDRA was implemented to reduce metal artifacts via weighted hybrid reconstructed images [maximum likelihood expectation maximization (MLEM) and shift-and-add (SAA)]. Pulsed X-ray exposures with rapid switching between low and high tube potential kVp were used for DE-DT imaging, and the images were compared using conventional filtered back projection (FBP), MLEM, the simultaneous algebraic reconstruction technique total variation (SART-TV), virtual monochromatic processing, and metal artifact reduction (MAR)-processing algorithms. The reductions in metal artifacts were compared using an artifact index (AI), Gumbel distribution of the largest variations, and the artifact spread functions (ASFs) for prosthesis phantom. The novel DEMDRA yielded an adequately effective overall performance in terms of the AI, and the resulting images yielded good results independently of the type of metal used in the prosthetic phantom, as well as good noise artifact removal, particularly at greater distances from metal objects. Furthermore, the DEMDRA represented the minimum in the model of largest variations. Regarding the ASF analysis, the novel DEMDRA yielded superior metal artifact reduction when compared with conventional reconstruction algorithms with and without MAR processing. Finally, the DEMDRA was particularly useful for reducing high-frequency artifacts.

Remote Optical Cardiopulmonary Signal Extraction With Noise Artifact Removal, Multiple Subject Detection & Long-Distance

Most existing imaging technologies are prone to noise artifact resulting from movement of subjects, movement of the camera, facial expressions, talking, skin tone, and lighting variations. In addition, these technologies have been limited to detecting physiological signs from a single subject at a time. Still, another challenge facing these technologies is that they have only been demonstrated over a limited range to a subject. This paper proposes an efficient remote imaging system with a new, low-complexity method for noise artifact removal to extract the cardiopulmonary signal from a number of subjects (up to six people) and at long-distances (up to 60 m). The experimental results of the proposed system showed a strong agreement, high correlation, and low noise level with the reference measurements and outperformed the conventional measurement methods such as independent component analysis and principle component analysis in both the stationary and non-stationary scenarios.

Novel Flexible Wearable Sensor Materials and Signal Processing for Vital Sign and Human Activity Monitoring.

Advances in flexible electronic materials and smart textile, along with broad availability of smart phones, cloud and wireless systems have empowered the wearable technologies for significant impact on future of digital and personalized healthcare as well as consumer electronics. However, challenges related to lack of accuracy, reliability, high power consumption, rigid or bulky form factor and difficulty in interpretation of data have limited their wide-scale application in these potential areas. As an important solution to these challenges, we present latest advances in novel flexible electronic materials and sensors that enable comfortable and conformable body interaction and potential for invisible integration within daily apparel. Advances in novel flexible materials and sensors are described for wearable monitoring of human vital signs including, body temperature, respiratory rate and heart rate, muscle movements and activity. We then present advances in signal processing focusing on motion and noise artifact removal, data mining and aspects of sensor fusion relevant to future clinical applications of wearable technology.

Simultaneous Tracking of Cardiorespiratory Signals for Multiple Persons Using a Machine Vision System With Noise Artifact Removal.

Most existing non-contact monitoring systems are limited to detecting physiological signs from a single subject at a time. Still, another challenge facing these systems is that they are prone to noise artifacts resulting from motion of subjects, facial expressions, talking, skin tone, and illumination variations. This paper proposes an efficient non-contact system based on a digital camera to track the cardiorespiratory signal from a number of subjects (up to six persons) at the same time with a new method for noise artifact removal. The proposed system relied on the physiological and physical effects as a result of the activity of the cardiovascular and respiratory systems, such as skin color changes and head motion. Since these effects are imperceptible to the human eye and highly affected by the noise variations, we used advanced signal and video processing techniques, including developing video magnification technique, complete ensemble empirical mode decomposition with adaptive noise, and canonical correlation analysis to extract the heart rate and respiratory rate from multiple subjects under the noise artifact assumptions. The experimental results of the proposed system had a significant correlation (Pearson’s correlation coefficient = 0.9994, Spearman correlation coefficient = 0.9987, and root mean square error = 0.32) when compared with the conventional contact methods (pulse oximeter and piezorespiratory belt), which makes the proposed system a promising candidate for novel applications.

Photoplethysmograph signal reconstruction based on a novel motion artifact detection-reduction approach. Part II: Motion and noise artifact removal.

We introduce a new method to reconstruct motion and noise artifact (MNA) contaminated photoplethysmogram (PPG) data. A method to detect MNA corrupted data is provided in a companion paper. Our reconstruction algorithm is based on an iterative motion artifact removal (IMAR) approach, which utilizes the singular spectral analysis algorithm to remove MNA artifacts so that the most accurate estimates of uncorrupted heart rates (HRs) and arterial oxygen saturation (SpO2) values recorded by a pulse oximeter can be derived. Using both computer simulations and three different experimental data sets, we show that the proposed IMAR approach can reliably reconstruct MNA corrupted data segments, as the estimated HR and SpO2 values do not significantly deviate from the uncorrupted reference measurements. Comparison of the accuracy of reconstruction of the MNA corrupted data segments between our IMAR approach and the time-domain independent component analysis (TD-ICA) is made for all data sets as the latter method has been shown to provide good performance. For simulated data, there were no significant differences in the reconstructed HR and SpO2 values starting from 10dB down to -15dB for both white and colored noise contaminated PPG data using IMAR; for TD-ICA, significant differences were observed starting at 10dB. Two experimental PPG data sets were created with contrived MNA by having subjects perform random forehead and rapid side-to-side finger movements show that; the performance of the IMAR approach on these data sets was quite accurate as non-significant differences in the reconstructed HR and SpO2 were found compared to non-contaminated reference values, in most subjects. In comparison, the accuracy of the TD-ICA was poor as there were significant differences in reconstructed HR and SpO2 values in most subjects. For non-contrived MNA corrupted PPG data, which were collected with subjects performing walking and stair climbing tasks, the IMAR significantly outperformed TD-ICA as the former method provided HR and SpO2 values that were non-significantly different than MNA free reference values.

Exploiting sparsity and low-rank structure for the recovery of multi-slice breast MRIs with reduced sampling error

It has been shown that, magnetic resonance images (MRIs) with sparsity representation in a transformed domain, e.g. spatial finite-differences (FD), or discrete cosine transform (DCT), can be restored from undersampled k-space via applying current compressive sampling theory. The paper presents a model-based method for the restoration of MRIs. The reduced-order model, in which a full-system-response is projected onto a subspace of lower dimensionality, has been used to accelerate image reconstruction by reducing the size of the involved linear system. In this paper, the singular value threshold (SVT) technique is applied as a denoising scheme to reduce and select the model order of the inverse Fourier transform image, and to restore multi-slice breast MRIs that have been compressively sampled in k-space. The restored MRIs with SVT for denoising show reduced sampling errors compared to the direct MRI restoration methods via spatial FD, or DCT. Compressive sampling is a technique for finding sparse solutions to underdetermined linear systems. The sparsity that is implicit in MRIs is to explore the solution to MRI reconstruction after transformation from significantly undersampled k-space. The challenge, however, is that, since some incoherent artifacts result from the random undersampling, noise-like interference is added to the image with sparse representation. These recovery algorithms in the literature are not capable of fully removing the artifacts. It is necessary to introduce a denoising procedure to improve the quality of image recovery. This paper applies a singular value threshold algorithm to reduce the model order of image basis functions, which allows further improvement of the quality of image reconstruction with removal of noise artifacts. The principle of the denoising scheme is to reconstruct the sparse MRI matrices optimally with a lower rank via selecting smaller number of dominant singular values. The singular value threshold algorithm is performed by minimizing the nuclear norm of difference between the sampled image and the recovered image. It has been illustrated that this algorithm improves the ability of previous image reconstruction algorithms to remove noise artifacts while significantly improving the quality of MRI recovery.

Dynamic linear model analysis of optical imaging data acquired from the human neocortex

The amount of light absorbed and scattered by neocortical tissue is altered by neuronal activity. Imaging of intrinsic optical signals (ImIOS), a technique for mapping these activity-evoked optical changes with an imaging detector, has the potential to be useful for both clinical and experimental investigations of the human neocortex. However, its usefulness for human studies is currently limited because intraoperatively acquired ImIOS data is noisy. To improve the reliability and usefulness of ImIOS for human studies, it is desirable to find appropriate methods for the removal of noise artifacts and its statistical analysis. Here we develop a Bayesian, dynamic linear modeling approach that appears to address these problems. A dynamic linear model (DLM) was constructed that included cyclic components to model the heartbeat and respiration artifacts, and a local linear component to model the activity-evoked response. The robustness of the model was tested on a set of ImIOS data acquired from the exposed cortices of six human subjects illuminated with either 535nm or 660nm light. The DLM adequately reduced noise artifacts in these data while reliably preserving their activity-evoked optical responses. To demonstrate how these methods might be used for intraoperative neurosurgical mapping, optical data acquired from a single human subject during direct electrical stimulation of the cortex were quantitatively analyzed. This example showed that the DLM can be used to provide quantitative information about human ImIOS data that is not available through qualitative analysis alone.