Release Step Research Articles

Releasing Preferentially Sequestered Na+ from Its Confinement by Beauvericin: A Single Water Molecule is the Accomplice.

Beauvericin (Bv) is a natural ionophore capable of transporting ions across biological membranes. Mass spectrometry and infrared spectroscopy show that Bv specifically captures sodium ions with a unique 6-fold coordination in its cavity, which illustrates how ions are carried through the membrane. But with no reports on how ions are released from Bv at the interface, a complete picture of the ion transport process has yet to be established. In this study, conformational changes of Bv complexes with alkali metal ions upon hydration were investigated using infrared spectroscopy and computational calculations. The addition of a single water molecule to Na+Bv pries the ion away from the 6-fold cavity to the amide face of the ionophore, evidence of the first step of ion release. In contrast, there is little impact on the other M+Bv complexes, with the ion bound to the three carbonyl groups on the amide face. Analysis of the carbonyl C═O and water OH stretching modes reveals the competition between ion-ionophore, ion-water, and water-ionophore interactions and demonstrates how water actively participates in ion transport by initiating ion release from the ionophore.

On the Control of Directionality of Myosin.

The origin of the unique directionality of myosin has been a problem of fundamental and practical importance. This work establishes in a conclusive way that the directionality is controlled by tuning the barrier for the rate-determining step, namely, the ADP release step. This conclusion is based on exploring the molecular origin behind the reverse directionality of myosins V and VI and the determination of the origin of the change in the barriers of the ADP release for the forward and backward motions. Our investigation is performed by combining different simulation methods such as steer molecular dynamics (SMD), umbrella sampling, renormalization method, and automated path searching method. It is found that in the case of myosin V, the ADP release from the postrigor (trailing head) state overcomes a lower barrier than the prepowerstroke (leading head) state, which is also evident from experimental observation. In the case of myosin VI, we noticed a different trend when compared to myosin V. Since the directionality of myosins V and VI follows a reverse trend, we conclude that such differences in the directionality are controlled by the free energy barrier for the ADP release. Overall, the proof that the directionality of myosin is determined by the activation barrier of the rate-determining step in the cycle, rather than by some unspecified dynamical effects, has general importance.

Antiviral activity of the water extract and ethanol extract of Sorbus commixta against influenza A virus in vitro

Although vaccines and antivirals are currently available, influenza virus infections continually present major threats to human health. Due to genetic diversity and variability of influenza viruses, the development of new antiviral agents against the virus remains as a considerable challenge. In this study, we evaluated the antiviral activity of the water extract and ethanol extract of Sorbus commixta Hedl. (SCH), widely used as a medical herb, against influenza A viruses and identified molecular mechanisms for the antiviral activity. The water extract and ethanol extract of SCH demonstrated virucidal activity against influenza A virus at the noncytotoxic concentrations. In addition, cytopathic effect reduction assay and GFP fluorescence image analysis suggest that SCH extracts have inhibitory activity on multiple stages during influenza virus life cycle. Mechanisms studies showed that SCH extracts inhibited the biological functions of influenza viral surface hemagglutinin and neuraminidase proteins that play critical roles in the viral entry and release steps. SCH extracts not only prevented the receptor binding of influenza viral HA to the cellular receptors but also inhibited the HA-mediated membrane fusion. In addition, SCH extracts suppressed the enzyme activity of the viral neuraminidase. The results together suggest that SCH extracts contain antiviral natural compounds that inhibit multiple influenza viral proteins including the viral surface proteins. Our findings suggest that SCH extracts could be promising resources for the development of novel antiviral agents against influenza A viruses.

Structural and mechanistic insights into a mesophilic prokaryotic Argonaute.

Argonaute (Ago) proteins are programmable nucleases found in all domains of life, playing a crucial role in biological processes like DNA/RNA interference and gene regulation. Mesophilic prokaryotic Agos (pAgos) have gained increasing research interest due to their broad range of potential applications, yet their molecular mechanisms remain poorly understood. Here, we present seven cryo-electron microscopy structures of Kurthia massiliensis Ago (KmAgo) in various states. These structures encompass the steps of apo-form, guide binding, target recognition, cleavage, and release, revealing that KmAgo employs a unique DDD catalytic triad, instead of a DEDD tetrad, for DNA target cleavage under 5'P-DNA guide conditions. Notably, the last catalytic residue, D713, is positioned outside the catalytic pocket in the absence of guide. After guide binding, D713 enters the catalytic pocket. In contrast, the corresponding catalytic residue in other Agos has been consistently located in the catalytic pocket. Moreover, we identified several sites exhibiting enhanced catalytic activity through alanine mutagenesis. These sites have the potential to serve as engineering targets for augmenting the catalytic efficiency of KmAgo. This structural analysis of KmAgo advances the understanding of the diversity of molecular mechanisms by Agos, offering insights for developing and optimizing mesophilic pAgos-based programmable DNA and RNA manipulation tools.

Characterizing and Tailoring the Substrate Profile of a γ-Glutamyltransferase Variant.

Xenobiology is an emerging field that focuses on the extension and redesign of biological systems through the use of laboratory-derived xenomolecules, which are molecules that are new to the metabolism of the cell. Despite the enormous potential of using xenomolecules in living organisms, most noncanonical building blocks still need to be supplied externally, and often poor uptake into cells limits wider applicability. To improve the cytosolic availability of noncanonical molecules, a synthetic transport system based on portage transport was developed, in which molecules of interest "cargo" are linked to a synthetic transport vector that enables piggyback transport through the alkylsulfonate transporter (SsuABC) of Escherichia coli. Upon cytosolic delivery, the vector-cargo conjugate is enzymatically cleaved by GGTxe, leading to the release of the cargo molecule. To deepen our understanding of the synthetic transport system, we focused on the characterization and further development of the enzymatic cargo release step. Hence, the substrate scope of GGTxe was characterized using a library of structurally diverse vector-cargo conjugates and MS/MS-based quantification of hydrolysis products in a kinetic manner. The resulting substrate tolerance characterization revealed that vector-amino acid conjugates were significantly unfavored. To overcome this shortcoming, a selection system based on metabolic auxotrophy complementation and directed evolution of GGTxe was established. In a directed evolution campaign, we improved the enzymatic activity of GGTxe for vector-amino acid conjugates and revealed the importance of residue D386 in the cargo unloading step.

Achieving high geometric fidelity in vat photopolymerization additive manufacturing through liquid surface support

The top-down vat photopolymerization (VPP) printing process, known for its extensive material adaptability and elimination of the release step between the printed object and the separation film, is widely used in 3D printing of advanced functional materials. However, for slurries that cannot achieve rapid self-leveling, edge morphology distortion in printed objects reduces geometric precision. This study investigated the issue of edge morphology distortion in the top-down VPP printing process, and proposes a liquid surface support (LSS) printing method that can be applied to general VPP printers. The results show that the protective slurry fence printed simultaneously with the object can provide excellent liquid surface support for the uncured layer above the printed object, which shifts the edge morphology distortion issue from the target object to the fence. The gap distance between the fence and the target sample is identified as the primary factor affecting edge morphology fidelity, which is influenced by surface tension. Finally, we successfully validated the application of the LSS printing method in the printing of ceramic dental prostheses and slender rod structures. This novel method significantly enhances the geometric precision of printed samples and is expected to promote the advancement of VPP printing applications for advanced functional materials.

Positive feedback in Ras activation by full-length SOS arises from autoinhibition release mechanism

Signaling through the Ras-MAPK pathway can exhibit switch-like activation, which has been attributed to the underlying positive feedback and bimodality in the activation of RasGDP to RasGTP by SOS. SOS contains both catalytic and allosteric Ras binding sites, and a common assumption is that allosteric activation selectively by RasGTP provides the mechanism of positive feedback. However, recent single-molecule studies have revealed that SOS catalytic rates are independent of the nucleotide state of Ras in the allosteric binding site, raising doubt about this as a positive feedback mechanism. Here, we perform detailed kinetic analyses of receptor-mediated recruitment of full-length SOS to the membrane while simultaneously monitoring its catalytic activation of Ras. These results, along with kinetic modeling, expose the autoinhibition release step in SOS, rather than either recruitment or allosteric activation, as the underlying mechanism giving rise to positive feedback in Ras activation.

Atg8/LC3 controls systemic nutrient surplus signaling in flies and humans

Organisms experience constant nutritional flux. Mechanisms at the interface of opposing nutritional states-scarcity and surplus-enable organismal energy homeostasis. Contingent on nutritional stores, adipocytes secrete adipokines, such as the fat hormone leptin, to signal nutrient status to the central brain. Increased leptin secretion underlies metabolic dysregulation during common obesity, but the molecular mechanisms regulating leptin secretion from human adipocytes are poorly understood. Here, we report that Atg8/LC3 family proteins, best known for their role in autophagy during nutrient scarcity, play an evolutionarily conserved role during nutrient surplus by promoting adipokine secretion. We show that in a well-fed state, Atg8/LC3 promotes the secretion of the Drosophila functional leptin ortholog unpaired 2 (Upd2) and leptin from human adipocytes. Proteomic analyses reveal that LC3 directs leptin to a secretory pathway in human cells. We identified LC3-dependent extracellular vesicle (EV) loading and secretion (LDELS) as a required step for leptin release, highlighting a unique secretory route adopted by leptin in human adipocytes. In Drosophila, mutations to Upd2's Atg8 interaction motif (AIM) result in constitutive adipokine retention. Atg8-mediated Upd2 retention alters lipid storage and hunger response and rewires the bulk organismal transcriptome in a manner conducive to starvation survival. Thus, Atg8/LC3's bidirectional role in nutrient sensing-conveying nutrient surplus and responding to nutrient deprivation-enables organisms to manage nutrient flux effectively. We posit that decoding how bidirectional molecular switches-such as Atg8/LC3-operate at the nexus of nutritional scarcity and surplus will inform therapeutic strategies to tackle chronic metabolic disorders.

Cleaving Folded RNA by Multifunctional DNAzyme Nanomachines.

Both tight and specific binding of folded biological mRNA is required for gene silencing by oligonucleotide gene therapy agents. However, this is fundamentally impossible using the conventional oligonucleotide probes according to the affinity/specificity dilemma. This study addresses this problem for cleaving folded RNA by using multicomponent agents (dubbed 'DNA nanomachine' or DNM). DNMs bind RNA by four short RNA binding arms, which ensure tight and highly selective RNA binding. Along with the improved affinity, DNM maintain the high sequence selectivity of the conventional DNAzymes. DNM enabled up to 3-fold improvement in DNAzymes catalytic efficiency (kcat/Km) by facilitating both RNA substrate binding and product release steps of the catalytic cycle. This study demonstrates that multicomponent probes organized in sophisticated structures can help to achieve the balance between affinity and selectivity in recognizing folded RNA and thus creates a foundation for applying complex DNA nanostructures derived by DNA nanotechnology in gene therapy.

Direct Glycan Analysis of Biological Samples and Intact Glycoproteins by Integrating Machine Learning-Driven Surface-Enhanced Raman Scattering and Boronic Acid Arrays.

Frequent monitoring of glycan patterns is a critical step in studying glycan-mediated cellular processes. However, the current glycan analysis tools are resource-intensive and less suitable for routine use in standard laboratories. We developed a novel glycan detection platform by integrating surface-enhanced Raman spectroscopy (SERS), boronic acid (BA) receptors, and machine learning tools. This sensor monitors the molecular fingerprint spectra of BA binding to cis-diol-containing glycans. Different types of BA receptors could yield different stereoselective reactions toward different glycans and exhibit unique vibrational spectra. By integration of the Raman spectra collected from different BA receptors, the structural information can be enriched, eventually improving the accuracy of glycan classification and quantification. Here, we established a SERS-based sensor incorporating multiple different BA receptors. This sensing platform could directly analyze the biological samples, including whole milk and intact glycoproteins (fetuin and asialofetuin), without tedious glycan release and purification steps. The results demonstrate the platform's ability to classify milk oligosaccharides with remarkable classification accuracy, despite the presence of other non-glycan constituents in the background. This sensor could also directly quantify sialylation levels of a fetuin/asialofetuin mixture without glycan release procedures. Moreover, by selecting appropriate BA receptors, the sensor exhibits an excellent performance of differentiating between α2,3 and α2,6 linkages of sialic acids. This low-cost, rapid, and highly accessible sensor will provide the scientific community with an invaluable tool for routine glycan screening in standard laboratories.

New Hydrophilic Matrix Tablets for the Controlled Released of Chlorzoxazone.

The modified release of active substances such as chlorzoxazone from matrix tablets, based on Kollidon®SR and chitosan, depends both on the drug solubility in the dissolution medium and on the matrix composition. The aim of this study is to obtain some new oral matrix tablet formulations, based on Kollidon®SR and chitosan, in order to optimize the low-dose oral bioavailability of chlorzoxazone, a non-steroidal anti-inflammatory drug of class II Biopharmaceutical Classification System. Nine types of chlorzoxazone matrix tablets were obtained using the direct compression method by varying the components ratio as 1:1, 1:2, and 1:3 chlorzoxazone/excipients, 20-40 w/w % Kollidon®SR, 3-7 w/w % chitosan while the auxiliary substances: Aerosil® 1 w/w %, magnesium stearate 0.5 w/w % and Avicel® up to 100 w/w % were kept in constant concentrations. Pharmaco-technical characterization of the tablets included the analysis of flowability and compressibility properties (flow time, friction coefficient, angle of repose, Hausner ratio, and Carr index), and pharmaco-chemical characteristics (such as mass and dose uniformity, thickness, diameter, mechanical strength, friability, softening degree, and in vitro release profiles). Based on the obtained results, only three matrix tablet formulations (F1b, F2b, and F3b, containing 30 w/w % KOL and 5 w/w % CHT, were selected and further tested. These formulations were studied in detail by Fourier-transform infrared spectrometry, X-ray diffraction, thermogravimetry, and differential scanning calorimetry. The three formulations were comparatively studied regarding the release kinetics of active substances using in vitro release testing. The results were analyzed by fitting into four representative mathematical models for the modified-release oral formulations. In vitro kinetic study revealed a complex mechanism of release occurring in two steps of drug release, the first step (0-2 h) and the second (2-36 h). Two factors were calculated to assess the release profile of chlorzoxazone: f1-the similarity factor, and f2-the factor difference. The results have shown that both Kollidon®SR and chitosan may be used as matrix-forming agents when combined with chlorzoxazone. The three formulations showed optima pharmaco-technical properties and in vitro kinetic behavior; therefore, they have tremendous potential to be used in oral pharmaceutical products for the controlled delivery of chlorzoxazone. In vitro dissolution tests revealed a faster drug release for the F2b sample.

Light-Responsive Pt(IV) Prodrugs with Controlled Photoactivation and Low Dark Toxicity.

Light-induced release of cisplatin from Pt(IV) prodrugs represents a promising approach for precise control over the antiproliferative activity of Pt-based chemotherapeutic drugs. This method has the potential to overcome crucial drawbacks of conventional cisplatin therapy, such as high general toxicity toward healthy organs and tissues. Herein, we report two Pt(IV) prodrugs with BODIPY-based photoactive ligands Pt-1 and Pt-2, which were designed using carbamate and triazole linkers, respectively. Both prodrugs demonstrated the ability to release cisplatin under blue light irradiation without the requirement of an external reducing agent. Dicarboxylated Pt-2 prodrug turned out to be more stable in the dark and more sensitive to light than its monocarbamate Pt-1 counterpart; these observations were explained using DFT calculations. The investigation of the photoreduction mechanism of Pt-1 and Pt-2 prodrugs using DFT modeling and ΔG0 PET estimation suggests that the photoinduced electron transfer from the singlet excited state of the BODIPY axial ligand to the Pt(IV) center is the key step in the light-induced release of cisplatin from the complexes. Cytotoxicity studies demonstrated that both prodrugs were nontoxic in the dark and toxic to MCF-7 cells under low-dose irradiation with blue light, and the observed effect was solely due to the cisplatin release from the Pt(IV) prodrugs. Our research presents an elegant synthetic approach to light-activated Pt(IV) prodrugs and presents findings that may contribute to the future rational design of photoactivatable Pt(IV) prodrugs.

Photorelease of Nitric Oxide (NO) in Mono- and Bimetallic Ruthenium Nitrosyl Complexes: A Photokinetic Investigation with a Two-Step Model.

Two monometallic and three bimetallic ruthenium acetonitrile (RuMeCN) complexes are presented and fully characterized. All of them are built from the same skeleton [FTRu(bpy)(MeCN)]2+, in which FT is a fluorenyl-substituted terpyridine ligand and bpy is the 2,2'-bipyridine. The crystal structure of [FTRu(bpy)(MeCN)](PF6)2 is presented. A careful spectroscopic analysis allows establishing that these 5 RuMeCN complexes can be identified as the product of the photoreaction of 5 related RuNO complexes, investigated as efficient nitric oxide (NO) donors. Based on this set of complexes, the mechanism of the NO photorelease of the bimetallic complexes has been established through a complete investigation under irradiations performed at 365, 400, 455, and 490 nm wavelength. A two-step (A → B → C) kinetic model specially designed for this purpose provides a good description of the mechanism, with quantum yields of photorelease in the range 0.001-0.029, depending on the irradiation wavelength. In the first step of release, the quantum yields (ϕAB) are always found to be larger than those of the second step (ϕBC), at any irradiation wavelengths.

Methotrexate-Polymer Nanocomposites for Targeted Pulmonary Drug Delivery

Nanocomposite formulation is a suitable technology that enables the development of successful dry powder inhalers. The methotrexate (MTX) and polyamide-disulfide (polymer) were used as a model to form MTX-polymer nanocomposites. Different amounts of the independent variable, MTX (0.025 and 0.050 g), polymer (0.05 and 0.01 g), pH (6.7 and 11.3), and across-linker ferric chloride (FeCl3) (0.05 and 0.10 g) were used. The loading efficiency and particle size were dependent variables. The optimized formula can be obtained with the highest loading efficiency and optimum particle size. This formula can be collected by using 0.025 g of drug, 0.079 g of polymer, 0.050 g of FeCl3, and pH = 6.7. The release of MTX from the nanocomposites occurs in two release steps; the first release step starts from the beginning up to 60 min, followed by a continuous release phase within 60 min. The results of the NGI analysis demonstrated that 28.1% of the nominated dose in each puff reached the lower parts of the respiratory system, an indication that the nanocomposites can be used in the delivery of MTX as a respiratory system.

Oscillatory work and the step that generates force in single myofibrils from rabbit psoas.

The elementary molecular step that generates force by cross-bridges (CBs) in active muscles has been under intense investigation in the field of muscle biophysics. It is known that an increase in the phosphate (Pi) concentration diminishes isometric force in active fibers, indicating a tight coupling between the force generation step and the Pi release step. The question asked here is whether the force generation occurs before Pi release or after release. We investigated the effect of Pi on oscillatory work production in single myofibrils and found that Pi-attached state(s) to CBs is essential for its production. Oscillatory work is the mechanism that allows an insect to fly by beating its wings, and it also has been observed in skeletal and cardiac muscle fibers, implying that it is an essential feature of all striated muscle types. With our studies, oscillatory work disappears in the absence of Pi in experiments using myofibrils. This suggests that force is generated during a transition between steps of oscillatory work production, and that the states involved in force production must have Pi attached. With sinusoidal analysis, we obtained the kinetic constants around the Pi release steps, established a CB scheme, and evaluated force generated (and supported) by each CB state. Our results demonstrate that force is generated before Pi is released, and the same force is maintained after Pi is released. Stretch activation and/or delayed tension can also be explained with this CB scheme and forms the basis of force generation and oscillatory work production.

Exploring Simple Particle-Based Signal Amplification Strategies in a Heterogeneous Sandwich Immunoassay with Optical Detection.

Heterogeneous sandwich immunoassays are widely used for biomarker detection in bioanalysis and medical diagnostics. The high analyte sensitivity of the current "gold standard" enzyme-linked immunosorbent assay (ELISA) originates from the signal-generating enzymatic amplification step, yielding a high number of optically detectable reporter molecules. For future point-of-care testing (POCT) and point-of-need applications, there is an increasing interest in more simple detection strategies that circumvent time-consuming and temperature-dependent enzymatic reactions. A common concept to aim for detection limits comparable to those of enzymatic amplification reactions is the usage of polymer nanoparticles (NP) stained with a large number of chromophores. We explored different simple NP-based signal amplification strategies for heterogeneous sandwich immunoassays that rely on an extraction-triggered release step of different types of optically detectable reporters. Therefore, streptavidin-functionalized polystyrene particles (PSP) are utilized as carriers for (i) the fluorescent dye coumarin 153 (C153) and (ii) hemin (hem) molecules catalyzing the luminol reaction enabling chemiluminescence (CL) detection. Additionally, (iii) NP labeling with hemin-based microperoxidase MP11 was assessed. For each amplification approach, the PSP was first systematically optimized regarding size, loading concentration, and surface chemistry. Then, for an immunoassay for the inflammation marker C-reactive protein (CRP), the analyte sensitivity achievable with optimized PSP systems was compared with the established ELISA concept for photometric and CL detection. Careful optimization led to a limit of detection (LOD) of 0.1 ng/mL for MP11-labeled PSP and CL detection, performing similarly well to a photometric ELISA (0.13 ng/mL), which demonstrates the huge potential of our novel assay concept.

Modulating tumoral exosomes and fibroblast phenotype using nanoliposomes augments cancer immunotherapy.

Cancer cells program fibroblasts into cancer associated fibroblasts (CAFs) in a two-step manner. First, cancer cells secrete exosomes to program quiescent fibroblasts into activated CAFs. Second, cancer cells maintain the CAF phenotype via activation of signal transduction pathways. We rationalized that inhibiting this two-step process can normalize CAFs into quiescent fibroblasts and augment the efficacy of immunotherapy. We show that cancer cell-targeted nanoliposomes that inhibit sequential steps of exosome biogenesis and release from lung cancer cells block the differentiation of lung fibroblasts into CAFs. In parallel, we demonstrate that CAF-targeted nanoliposomes that block two distinct nodes in fibroblast growth factor receptor (FGFR)-Wnt/β-catenin signaling pathway can reverse activate CAFs into quiescent fibroblasts. Co-administration of both nanoliposomes significantly improves the infiltration of cytotoxic T cells and enhances the antitumor efficacy of αPD-L1 in immunocompetent lung cancer-bearing mice. Simultaneously blocking the tumoral exosome-mediated activation of fibroblasts and FGFR-Wnt/β-catenin signaling constitutes a promising approach to augment immunotherapy.

Controllable Assembly of a Quantum Dot-Based Aptasensor Guided by CRISPR/Cas12a for Direct Measurement of Circulating Tumor Cells in Human Blood.

Accurate and sensitive analysis of circulating tumor cells (CTCs) in human blood provides a non-invasive approach for the evaluation of cancer metastasis and early cancer diagnosis. Herein, we demonstrate the controllable assembly of a quantum dot (QD)-based aptasensor guided by CRISPR/Cas12a for direct measurement of CTCs in human blood. We introduce a magnetic bead@activator/recognizer duplex core-shell structure to construct a multifunctional platform for the capture and direct detection of CTCs in human blood, without the need for additional CTC release and re-identification steps. Notably, the introduction of magnetic separation ensures that only a target-induced free activator can initiate the downstream catalysis, efficiently avoiding the undesired catalysis triggered by inappropriate recognition of the activator/recognizer duplex structure by crRNAs. This aptasensor achieves high CTC-capture efficiency (82.72%) and sensitive detection of CTCs with a limit of detection of 2 cells mL-1 in human blood, holding great promise for the liquid biopsy of cancers.

Ready-to-transfer two-dimensional materials using tunable adhesive force tapes

Graphene and other two-dimensional (2D) materials can be used to create electronic and optoelectronic devices. However, their development has been limited by the lack of effective large-area transfer processes. Here we report a transfer method that uses functional tapes with adhesive forces controlled by ultraviolet light. The adhesion of the tape is optimized for the transfer of monolayer graphene, providing a yield of over 99%. Once detached from the growth substrate, the graphene/tape stack enables easy transfer of graphene to the desired target substrate. The method can be used to transfer other 2D materials, including bilayer graphene, transition metal dichalcogenides, hexagonal boron nitride and stacked heterostructures. The solvent-free nature of the final release step facilitates transfer to various target substrates including flexible polymers, paper and three-dimensional surfaces. The tape/2D material stacks can also be cut into desired sizes and shapes, allowing site-selective device fabrication with reduced loss of 2D materials.

Tubercidin inhibits PRRSV replication via RIG-I/NF-κB pathways and interrupting viral nsp2 synthesis.

Porcine reproductive and respiratory syndrome (PRRS) is one of the most important swine diseases, which causes huge economic loss worldwide. However, there is no effective therapeutic method for PRRS prevention and control. Here, we found that tubercidin, a naturally extracted adenosine analog, exhibited strong anti-porcine reproductive and respiratory syndrome virus (PRRSV) activity. Mechanically, tubercidin inhibited viral binding, replication, and release. Tubercidin suppressed PRRSV non-structural protein 2 expression, which is important for the formation of replication and transcription complex, leading to the block of viral RNA synthesis and PRRSV replication. Moreover, tubercidin could activate retinoic acid-inducible gene I/nuclear factor kappa-light-chain-enhancer of activated B cell innate immune signaling pathway and increased the expression of interferons and proinflammatory cytokines, which was the other way to inhibit PRRSV replication. Our work evaluated the potential value of tubercidin as an antiviral agent on PRRSV replication and provided a new way to prevent PRRSV replication in vitro.