Relative Concentrations Research Articles

Ligand-Assisted self-assembly of colloidal Ag2S nanoparticles

Over the last decade, great attention of researchers has been focused on nanoscale self-assembly due to increasingly technology-relevant applications. Pattern formation by colloidal droplet evaporation is one of the fascinating subjects to study. A deep understanding of physical and chemical processes of the deposited structure formation allows the development of bioprinting methods, nanoarchitectures for optics and electronics, methods for detecting the state of peptides, proteins, etc. In the present work, the effect of organic ligands (MPS, BSA, GSH, EDTA, TG) on Ag2S NP self-assembly during solution droplet evaporation was investigated. The synthesis conditions were optimized to minimize or neglect the contribution of surface roughness, substrate thermal conductivity, NP shape and size, type of solvent. Properties of a stabilizer, such as molecular length, reactivity, tendency to polycondensate or chelate, and their relative concentration affect the nanoparticle–nanoparticle interactions, which results in several types of pattern formation. The dominant forces in different regions of the evaporated droplet via ligand were discussed. The models of pattern formation were proposed. Thus, depending on the ligand, Ag2S NPs tend to form rings (MPS, BSA), concentric rings (BSA), net like structures (TG), and chains (MPS, TG). In addition, it was shown that replacing water with deuterium can significantly change self-organized architectures.

Effects of inoculation and dry matter content on microbiome dynamics and metabolome profiling of sorghum silage

Sorghum forage was ensiled for 90 days at two dry matter (DM) contents (27 vs. 39%) without or with Lactiplantibacillus plantarum inoculation. On day 90 of fermentation, silages were sampled to assess the microbial community dynamics and metabolome profile. L. plantarum inoculation improved silage quality, as shown by a lower pH and greater acetic acid concentration. Loss of DM remained unaffected by L. plantarum inoculation but was greater in low- vs. high-DM sorghum silages (14.4 vs. 6.62%). The microbiome analysis revealed that Pseudomonas congelans represented the dominant species of the epiphytic microbiota in both low- and high-DM sorghum forage before ensiling. However, L. buchneri represented the dominant species at the end of ensiling. Ensiling fermentation resulted in distinct metabolic changes in silages with varying DM content. In low-DM silages, ensiling fermentation led to the accumulation of 24 metabolites and a reduction in the relative concentration of 13 metabolites. In high-DM silages, ensiling fermentation resulted in an increase in the relative concentration of 26 metabolites but a decrease in the concentration of 8 metabolites. Compared to non-inoculated silages, L. plantarum inoculation resulted in an increased concentration of 3 metabolites and a reduced concentration of 5 metabolites in low-DM silages. Similarly, in high-DM silages, there was an elevation in the relative concentration of 3 metabolites, while a decrease in 7 other metabolites. Ten metabolites with bio-functional activity were identified, including chrysoeriol, isorhamnetin, petunidin 3-glucoside, apigenin, caffeic acid, gallic acid, p-coumaric acid, trans-cinnamic acid, herniarin, and 3,4-dihydroxy-trans-cinnamate. This study presents a comprehensive analysis of microbiome and metabolome profiling of sorghum forage during ensiling as a function of DM content and L. plantarum inoculation, with a particular emphasis on identifying metabolites that may possess bio-functional properties.Key points• DM loss was not different by L. plantarum but higher in low- vs. high-DM silage.• L. buchneri dominated ensiling, regardless of DM level.• 10 metabolites with bio-functional activity were identified.

The Swedish version of the pain self-efficacy questionnaire short form, PSEQ-2SV: Cultural adaptation and psychometric evaluation in a population of patients with musculoskeletal disorders.

Measuring pain self-efficacy is suggested as relevant in patients with musculoskeletal disorders (MSDs) in a primary care setting. However, there is no pain self-efficacy questionnaire (PSEQ) available in Swedish. The aim of this study was to translate and culturally adapt PSEQ-2 to Swedish and evaluate reliability and validity in a population of patients with MSDs. A translation and cultural adaptation together with psychometric evaluation of reliability and validity were performed according to guidelines with three groups of participants with MSDs. First, a convenient sample of 25 individuals were interviewed in the translation process. Next, 61 participants completed the test-retest survey via social media or QR codes in waiting rooms in rehabilitation clinics. Finally, to evaluate construct validity questionnaires were obtained from 132 participants with MSDs in an ongoing randomized controlled trial. The Swedish version of PSEQ-2 showed adequate face and content validity. The results of 0.805 on Cohen's weighted kappa indicate that the reliability of PSEQ-2SV in a group of adults with MSDs is on the border between substantial and almost perfect. The point estimate regarding relative rank variance, measuring the individual variation within the group, and relative concentration, the systematic change in how the assessments are concentrated on the scale's categories, shows minor systematic differences and some random differences not neglectable. The construct validity of pre-defined hypotheses was met to some degree. The PSEQ-2SV has been accurately linguistically translated and tested for reliability and validity, in a population of MSDs, and is deemed to be able to be used in the clinic and in research. As there were some concerns regarding measurement error and systematic bias, more research could be of value.

Diffusiophoretic Behavior of Polyelectrolyte-Coated Particles.

Diffusiophoresis, the movement of particles under a solute concentration gradient, has practical implications in a number of applications, such as particle sorting, focusing, and sensing. For diffusiophoresis in an electrolyte solution, the particle velocity is described by the electrolyte relative concentration gradient and the diffusiophoretic mobility of the particle. The electrolyte concentration, which typically varies throughout the system in space and time, can also influence the zeta potential of particles in space and time. This variation affects the diffusiophoretic behavior, especially when the zeta potential is highly dependent on the electrolyte concentration. In this work, we show that adsorbing a single bilayer (or 4 bilayers) of a polyelectrolyte pair (PDADMAC/PSS) on the surface of microparticles resulted in effectively constant zeta potential values with respect to salt concentration throughout the experimental range of salt concentrations. This allowed a constant potential model for diffusiophoretic transport to describe the experimental observations, which was not the case for uncoated particles in the same electrolyte system. This work highlights the use of simple polyelectrolyte pairs to tune the zeta potential and maintain constant values for precise control of diffusiophoretic transport.

On the potential use of highly oxygenated organic molecules (HOMs) as indicators for ozone formation sensitivity

Abstract. Ozone (O3), an important and ubiquitous trace gas, protects lives from harmful solar ultraviolet (UV) radiation in the stratosphere but is toxic to living organisms in the troposphere. Additionally, tropospheric O3 is a key oxidant and a source of other oxidants (e.g., OH and NO3 radicals) for various volatile organic compounds (VOCs). Recently, highly oxygenated organic molecules (HOMs) were identified as a new compound group formed from the oxidation of many VOCs, making up a significant source of secondary organic aerosol (SOA). The pathways forming HOMs from VOCs involve autoxidation of peroxy radicals (RO2), formed ubiquitously in many VOC oxidation reactions. The main sink for RO2 is bimolecular reactions with other radicals, such as HO2, NO, or other RO2, and this largely determines the structure of the end products. Organic nitrates form solely from RO2 + NO reactions, while accretion products (“dimers”) form solely from RO2 + RO2 reactions. The RO2 + NO reaction also converts NO into NO2, making it a net source for O3 through NO2 photolysis. There is a highly nonlinear relationship between O3, NOx, and VOCs. Understanding the O3 formation sensitivity to changes in VOCs and NOx is crucial for making optimal mitigation policies to control O3 concentrations. However, determining the specific O3 formation regimes (either VOC-limited or NOx-limited) remains challenging in diverse environmental conditions. In this work we assessed whether HOM measurements can function as a real-time indicator for the O3 formation sensitivity based on the hypothesis that HOM compositions can describe the relative importance of NO as a terminator for RO2. Given the fast formation and short lifetimes of low-volatility HOMs (timescale of minutes), they describe the instantaneous chemical regime of the atmosphere. In this work, we conducted a series of monoterpene oxidation experiments in our chamber while varying the concentrations of NOx and VOCs under different NO2 photolysis rates. We also measured the relative concentrations of HOMs of different types (dimers, nitrate-containing monomers, and non-nitrate monomers) and used ratios between these to estimate the O3 formation sensitivity. We find that for this simple system, the O3 sensitivity could be described very well based on the HOM measurements. Future work will focus on determining to what extent this approach can be applied in more complex atmospheric environments. Ambient measurements of HOMs have become increasingly common during the last decade, and therefore we expect that there are already a large number of groups with available data for testing this approach.

Systematic Investigation on the Surfactant‐Assisted Liquid‐Phase Exfoliation of MoS2 and WS2 in Water for Sustainable 2D Material Inks

MoS2 and WS2 have gathered significant attention due to their tunable properties and wide range of applications. Liquid‐phase exfoliation (LPE) is a facile method to prepare 2D MoS2 and WS2. Currently, the principally employed solvents for LPE of MoS2 and WS2 are expensive and toxic, and have high boiling points. These drawbacks encourage to find more sustainable alternatives to the liquid medium used for the preparation of 2D material inks. Water is the best option, but surfactants are necessary for LPE in water, since MoS2 and WS2 are hydrophobic. Organic molecules with amphoteric character such as sodium dodecyl sulfate, sodium dodecylbenzene sulfonate, and sodium hexadecyl sulfonate (SHS) are selected as suitable candidates for the role. However, the study of these surfactants used in LPE is barely systematically reported. In this work, a detailed investigation is presented on their impact on the LPE of MoS2 and WS2, which are representatives of transition‐metal dichalcogenides. By characterizing and qualifying the products from average number of layers, it is found that all the surfactants work efficiently to exfoliate MoS2 and WS2 into few layers, and SHS stabilizes the 2D layers better than the other two. However, in terms of yield and relative surfactant concentration, a real trade‐off is not identified between maximized quantity of exfoliated materials and minimized surfactant concentration, which prompts to select the colloidal ink based on the specific further needs for processing.

AraLeTA: An Arabidopsis leaf expression atlas across diurnal and developmental scales.

Mature plant leaves are a composite of distinct cell types, including epidermal, mesophyll, and vascular cells. Notably, the proportion of these cells and the relative transcript concentrations within different cell types may change over time. While gene expression data at a single-cell level can provide cell-type-specific expression values, it is often too expensive to obtain these data for high-resolution time series. Although bulk RNA-seq can be performed in a high-resolution time series, RNA-seq using whole leaves measures average gene expression values across all cell types in each sample. In this study, we combined single-cell RNA-seq data with time-series data from whole leaves to assemble an atlas of cell-type-specific changes in gene expression over time for Arabidopsis (Arabidopsis thaliana). We inferred how the relative transcript concentrations of different cell types vary across diurnal and developmental timescales. Importantly, this analysis revealed 3 subgroups of mesophyll cells with distinct temporal profiles of expression. Finally, we developed tissue-specific gene networks that form a community resource: an Arabidopsis Leaf Time-dependent Atlas (AraLeTa). This allows users to extract gene networks that are confirmed by transcription factor-binding data and specific to certain cell types at certain times of day and at certain developmental stages. AraLeTa is available at https://regulatorynet.shinyapps.io/araleta/.

Arsenic in the groundwater aquifers of the Venetian Plain: geochemical modelling and occurrence of As-sulfides minerals, a review of data from the medio Brenta domain (Italy)

The Venetian Plain is known for areas with high concentrations of arsenic (As) in groundwater (up to more than 400 μg/L; exceptionally 647 μg/L, in selected areas). A study area was chosen, north of Padua, which exhibits typical residential, industrial, and agricultural characteristics similar to most Western countries and lacks hydrothermal, volcanic, or anthropogenic sources of arsenic. The pilot area was the focus of several studies which are reviewed in this note. The objectives of the studies were to verify the distribution of As concentrations in groundwater and sediments (mineralogical and geochemical analysis of groundwater sediments and of filtered and unfiltered groundwater) and to model the mobility of arsenic arising from water-rock interaction. The grain size of aquifer reservoirs includes gravel, sand, silt, and clay. The amount of organic matter in the aquifer sediments of the study area seems peculiar (higher) compared to other plains in the world; it influences the redox potential and the relative concentration of As in groundwater. Arsenic contamination in groundwater and redox conditions varied greatly in the area. Groundwater under oxidizing and highly reducing conditions had much lower arsenic concentrations compared to groundwater under intermediate reducing conditions. Arsenic minerals (such as realgar-pararealgar) occur in aquifer sediments and they were documented in the studied materials by different analytical techniques for the first time in the context of the Italian plains. Since these minerals are rare throughout the world in plain sediments not affected by volcanic or hydrothermal activity, their occurrence is a distinctive feature of the Venetian Plain aquifer. These arsenic minerals were found in peat sediments of the study area, consistent with geochemical modeling results, which require highly reducing conditions for their precipitation from groundwater. Modeling suggests that under oxidizing and up to slightly reducing conditions (from 200 mV to -50 mV), arsenic is adsorbed on solid phases, but a further decrease in redox potential leads arsenic desorption from solids and consequent groundwater contamination (from -50 mV to -250 mV). If the redox potential becomes even more negative (below -250 mV), geochemical conditions are favorable to the formation of arsenic sulfides. The precipitation of the realgar-pararealgar phases, predicted by the geochemical model, proceeds by extracting arsenic from the groundwater and quantitatively accounts for the lower arsenic concentration measured in the highly reducing groundwater of the study area.

Resistance to Frankliniella occidentalis during Different Plant Life Stages and under Different Environmental Conditions in the Ornamental Gladiolus.

The defense mechanisms of plants evolve as they develop. Previous research has identified chemical defenses against Western flower thrips (WFT) in Gladiolus (Gladiolus hybridus L.). Consequently, our study aimed to explore the consistency of these defense variations against WFT across the various developmental stages of Gladiolus grown under different conditions. Thrips bioassays were conducted on whole plants at three developmental stages, using the Charming Beauty and Robinetta varieties as examples of susceptible and resistant varieties, respectively. Metabolomic profiles of the leaves, buds and flowers before thrips infestation were analyzed. The thrips damage in Charming Beauty was more than 500-fold higher than the damage in Robinetta at all plant development stages. Relative concentrations of triterpenoid saponins and amino acids that were associated with resistance were higher in Robinetta at all plant stages. In Charming Beauty, the leaves exhibited greater damage compared to buds and flowers. The relative concentrations of alanine, valine and threonine were higher in buds and flowers than in leaves. The Metabolomic profiles of the leaves did not change significantly during plant development. In addition, we cultivated plants under different environmental conditions, ensuring consistency in the performance of the two varieties across different growing conditions. In conclusion, the chemical thrips resistance markers, based on the analysis of vegetative plants grown in climate rooms, were consistent over the plant's lifetime and for plants grown under field conditions.

Upgrading Cycling Stability and Capability of Hybrid Na‐CO2 Batteries via Tailoring Reaction Environment for Efficient Conversion CO2 to HCOOH

AbstractRechargeable Na‐CO2 batteries are considered to be an effective way to address the energy crisis and greenhouse effect due to their dual functions of CO2 fixation/utilization and energy storage. However, the insolubility and irreversibility of solid discharge products lead to poor discharge capacity and poor cycle performance. Herein, a novel strategy is proposed to enhance the electrochemical performance of hybrid Na‐CO2 batteries, using water‐in‐salt electrolyte (WiSE) to establish an optimal reaction environment, regulate the CO2 reduction pathway, and ultimately convert the discharge product of the battery from Na2CO3 to formic acid (HCOOH). This strategy effectively resolves the issue of poor reversibility, allowing the battery to exhibit excellent cycle performance (over 1200 cycles at 30 °C), especially under low‐temperature conditions (2534 cycles at −20 °C). Furthermore, density functional theory (DFT) calculations and experiments indicate that by adjusting the relative concentration of H/O atoms at the electrolyte/catalyst interface, the CO2 reduction pathway in the battery can be regulated, thus effectively enhancing CO2 capture capability and consequently achieving an ultra‐high discharge specific capacity of 148.1 mAh cm−2. This work effectively promotes the practical application of hybrid Na‐CO2 batteries and shall provide a guidance for converting CO2 into products with high‐value‐added chemicals.

An integrated pretreatment strategy for enhancing enzymatic hydrolysis efficiency of poplar: Hydrothermal treatment followed by a twin-screw extrusion

To reduce the dependence on chemical inputs during biomass pretreatment, an integrated process on the basis of hydrothermal pretreatment followed by twin-screw extrusion for poplar was proposed. A comparative study was conducted on the pore structure, crystallinity, relative surface lignin concentration, cellulose accessibility, and enzymatic hydrolysis efficiency of the pretreated materials. Results suggested that the relative surface lignin concentration of fibers pretreated by hydrothermal treatment (conducted at 170 ℃ for 90 min) coupled with extrusion (HE) treatment was decreased compared to the sole hydrothermal (H) process, which had a positive impact on the subsequent enzymatic hydrolysis. Additionally, the HE process resulted in an increase in pore size by 34.4%, pore volume by 447.5%, and specific surface area by 93.5%, which enhanced the penetration and interaction of water into the fibers and thus increased cellulose accessibility by 143.2%. SEM and TEM observations revealed that fibers were separated and finely fibrillated, large amounts of fragmentary structure and cracks appeared on the fiber. In addition, the cell wall structure was deformed and damaged, when pretreated by HE process. Overall, this work showed that hydrothermal treatment followed by twin-screw extrusion was an achievable strategy for high fermentable sugar production of hardwood.

Cerebral oxygenation and perfusion kinetics monitoring of military aircrew at high G using novel fNIRS wearable system.

Real-time physiological episode (PE) detection and management in aircrew operating high-performance aircraft (HPA) is crucial for the US Military. This paper addresses the unique challenges posed by high acceleration (G-force) in HPA aircrew and explores the potential of a novel wearable functional near-infrared spectroscopy (fNIRS) system, named NIRSense Aerie, to continuously monitor cerebral oxygenation during high G-force exposure. The NIRSense Aerie system is a flight-optimized, wearable fNIRS device designed to monitor tissue oxygenation 13-20 mm below the skin's surface. The system includes an optical frontend adhered to the forehead, an electronics module behind the earcup of aircrew helmets, and a custom adhesive for secure attachment. The fNIRS optical layout incorporates near-distance, middle-distance, and far-distance infrared emitters, a photodetector, and an accelerometer for motion measurements. Data processing involves the modified Beer-Lambert law for computing relative chromophore concentration changes. A human evaluation of the NIRSense Aerie was conducted on six subjects exposed to G-forces up to +9 Gz in an Aerospace Environmental Protection Laboratory centrifuge. fNIRS data, pulse oximetry, and electrocardiography (HR) were collected to analyze cerebral and superficial tissue oxygenation kinetics during G-loading and recovery. The NIRSense Aerie successfully captured cerebral deoxygenation responses during high G-force exposure, demonstrating its potential for continuous monitoring in challenging operational environments. Pulse oximetry was compromised during G-loading, emphasizing the system's advantage in uninterrupted cerebrovascular monitoring. Significant changes in oxygenation metrics were observed across G-loading levels, with distinct responses in Deoxy-Hb and Oxy-Hb concentrations. HR increased during G-loading, reflecting physiological stress and the anti-G straining maneuver. The NIRSense Aerie shows promise for real-time monitoring of aircrew physiological responses during high G-force exposure. Despite challenges, the system provides valuable insights into cerebral oxygenation kinetics. Future developments aim for miniaturization and optimization for enhanced aircrew comfort and wearability. This technology has potential for improving anti-G straining maneuver learning and retention through real-time cerebral oxygenation feedback during centrifuge training.

Study on the Wetting Mechanisms of Different Coal Ranks Based on Molecular Dynamics

The exploration of coal wettability is not only of paramount significance in the mitigation of coal dust and the development of coalbed methane, but it also provides crucial technical support for realizing the geological storage of CO2 within the ‘dual-carbon’ background. Molecular simulation serves as an effective means by which to investigate coal wettability at the microscopic level. This study employed a molecular dynamics simulation to investigate the wettability of coal across 13 distinct coal ranks. Through the analysis of trajectory files, and the incorporation of experimental data during the modeling process, the mechanisms governing the evolution of wettability were revealed. The results demonstrated that the contact angle on the surface of coal increases with the elevation of coal rank. The molecule relative concentration analysis revealed that, with increasing coal rank, the overlap range between water droplets and the coal slab decreases, the height increases, and the diffusion degree of water molecules decreases, which are outcomes consistent with the results of the contact angle measurement. The contact angle was strongly correlated with the number of hydrogen bonds and secondarily correlated with the numbers of carbonyls, hydroxyls, and ether oxygens. The formation of hydrogen bonds was notably correlated with the number of hydroxyls, followed by that of ether oxygens, while its correlations with carbonyls and carboxyls were comparatively weaker. The contact angle exhibited positive correlations with vitrinite reflectance and carbon content, while showing negative correlations with oxygen content, H/C, and O/C. Additionally, it demonstrated positive associations with total sp2 carbon (fa), aromatic carbon (fa′), and non-protonated aromatic carbon (faN), and negative associations with aliphatic carbon (fal) and methylene carbon (falH). Understanding the variations in wettability among different coal ranks can provide a foundational model and theoretical basis for further exploration of the complex interactions among coal, gas, and water across various coal ranks.

Profiling of cyclic di‐adenyl and ‐guanyl nucleotides and their precursors and degradation products in bacteria using LC–MS/MS

AbstractThe 3,3′‐linked cyclic dinucleotides (CDNs) of adenosine monophosphate (AMP) and guanosine monophosphate (GMP), cyclic di‐AMP (c‐di‐AMP), cyclic di‐GMP (c‐di‐GMP), and c‐GMP–AMP (cGAMP) are second messenger molecules in bacteria that regulate processes, such as biofilm formation, motility, virulence, stress response, and cell wall homeostasis. To analyze the profiles of the three CDNs together with their breakdown and precursor molecules, 5′‐phosphoadenylyl‐(3′ → 5′)adenine (pApA), 5′‐guanylyl‐(3′ → 5′)guanine (pGpG), 5′‐AMP, 3′‐ and 5′‐GMP, adenosine triphosphate (ATP), and GTP, we established an LC–MS/MS‐based approach for semi‐quantification and profiling. Weak anion exchange solid‐phase extraction was employed to improve selectivity and instrumental signal/noise of CDNs as well as pApA and pGpG. CDNs were analyzed using reverse‐phase UHPLC–MS/MS, whereas all other nucleotides were analyzed using hydrophilic interaction chromatography (HILIC)–MS/MS. The instrument limit of quantification ranged from 0.72 (c‐di‐AMP) to 60 nM (ATP and GTP). We applied this method to the analysis of the nine nucleotides in eight bacterial strains and found that the profiles varied widely in terms of both absolute and relative concentrations. Thus, CDN concentrations were generally <1 pmol/mg biomass, and the hydrolysis products, pApA and pGpG, were detected at lower pmol/mg concentrations. The presented method is a relatively simple and straightforward approach to profiling nucleotides with the rationale of comparing their relative levels between populations of bacterial strains.

Research on inspection route of hanging environmental robot based on computational fluid dynamics

The environment of a closed piggery is commonly characterized by spatial unevenness, and there are currently no specific standards for installation points of various environmental monitoring sensors. Therefore, the project team used the hanging track inspection robot (HTIR) as an environmental mon-itoring platform to seek the environmental monitoring points and ensure the scientific layout of moni-toring points. Ansys-CFD software was used to study the change rules of environmental parameters at 1.6 m (α plane), 0.7 m (β plane), and 0.4 m (γ plane) above the ground. The 300 monitoring points ((x1~x30) ×(y1~y10)) in each plane were analyzed to determine the most suitable monitoring points and inspection routes for HTIR. The results showed that: (1) All monitoring points could be arranged directly below the y3 track. (2) Monitoring points (x1, y3), (x10, y3) and (x30, y3) were environmental feature points. At (x1, y3), the maximum relative humidity and NH3 concentration on the α plane could be detected, and the maximum wind speed, maximum temperature, and maximum NH3 concentration on other planes could also be detected; At (x10, y3), the minimum temperature and maximum relative humidity of the β and γ planes could be detected; At (x30, y3), the maximum NH3 concentration in the α plane and the minimum relative humidity in all planes could be detected. This study scientifically arranged the inspection track and monitoring points for HTIR, improved the accuracy of environmental monitoring, and put forward suggestions for reducing NH3 concentration in closed piggeries, laying the foundation for the next step.

Genesis of salt deposits in the Jiangling Sag, Jianghan Basin, China: Constraints from H, O, and C isotopes and fluid inclusions of evaporites

Due to Yanshan movement and Himalayan movement, a series of faulted basins were formed in the late Cretaceous and Paleogene, including Shashi Formation of Paleocene in Jiangling sag of Jianghan Basin, when a set of salt lake was deposited. Analysis of lacustrine carbonate rocks in Shashi Formation of Paleocene shows that the δ13CPDB values of carbonate rocks range from −4.8 ‰ to −1.0 ‰, with an average value of −3.3 ‰. The δ18OPDB values ranged from −5.4 ‰ to −0.6 ‰, with an average value of −3.2 ‰. The positive correlation between δ13CPDB and δ18OPDB of the Shashi Formation carbonate rocks indicates that they developed in a relatively closed brackish lake system with obvious evaporation. The homogenization temperature of the upper Shashi Formation in Jiangling sag ranges from 15.3 °C to 51.8 °C, mainly concentrated in 25–30 °C. The δ18O isotope of halite inclusions ranges from −0.8‰ to 9.4‰, with an average of 4.9‰. The δD isotope of halite inclusions ranges from −91.3‰ to −65.0‰ with an average of −79.3‰, which are all lower than the Global Meteoric Water Line. The intense evaporation environment is consistent with the overall drought paleoclimate at that time. The quantitative LA-ICP-MS was used to analyze the composition of the primary inclusion of halite, and it was concluded that the original brine composition was Na-K-Mg-Cl-SO4 system with relative low concentration of Ca2+, high concentration of Mg and SO42- ions and K ions. The high content of Li, B, Br and Rb is related to the intense volcanic activity, deep fluid source and hot spring recharge in Jiangling Depression at that time. Based on carbonate carbon and oxygen isotopes, fluid inclusions temperature and composition, it is concluded that during the Shashi Formation period of Paleocene in Jiangling Sag, the lake basin was well sealed, with high salinity and high temperature, and belonged to a salt lake sedimentary environment, which was favorable for the deposit of salt deposits.

A robust superhydrophobic coating of siloxane resin and hydrophobic calcium carbonate nanoparticles for limestone protection

Hydrophobic calcium carbonate (CaCO3) nanoparticles (NPs), modified with dodecanoic acid (DA), are produced and dispersed in solutions of KSE 100, which is a silicic acid ester base product used for the conservation and maintenance of heritage and modern buildings. The dispersions are sprayed on limestone and marble specimens. By adjusting the relative concentrations of DA and NPs, the treated stones obtain superhydrophobic properties. Focusing on limestone it is reported that the treatment has negligible effects on the colour and vapour permeability of the original stone and offers protection against water capillary rise. Several studies are performed to test the durability of the composite (KSE + CaCO3-DA NPs) coating against rain impact, freezing and thawing, salt attack and UV radiation. Moreover, the mechanical, chemical and thermal durability of the coating is studied according to the tape peeling test, contact angles of drops which correspond to a vast range of pH, and heat treatment. The results of the aforementioned tests reveal the very good stability of the composite coating. In sum, it is reported that the wetting properties of the KSE 100 stone strengthener, which is used in building conservation, can be highly improved by adding a small amount of modified CaCO3 NPs. The latter are chemically compatible with calcareous stones.

Phytochemical profile of secondary metabolites in the phloem of mature Pinus pinaster trees attacked by the pine wood nematode

The present study highlights, for the first time, the chemical composition of secondary metabolites (lipophilic and hydrophilic compounds) present in the phloem tissues of infected mature Pinus pinaster Ait. trees (on average 74 years old), which may be potentially determinant in the development of the pine wood nematode (PWN) Bursaphelenchus xylophilus. The levels of secondary metabolites in the phloem of infected trees were fairly constant along the height of the trees (an average of 30% dry phloem), but slightly lower compared with total extractives content in the phloem of mature healthy P. pinaster trees (30.0 vs. 39.9%). The hydrophilic fraction represented 91% of the total soluble compounds (27.3% of phloem mass) and it was mainly composed of phenolic compounds and reducing sugars (44.8% and 58.8% of the ethanol-water extracts). The lipophilic fraction (2.7% of phloem mass), was dominated by tricyclic diterpenic compounds (54.2–63.2% of the total lipophilic extracts) and fatty acids. Differences in the relative concentrations of individual compounds were observed compared to healthy pines, suggesting a response to the biotic stress imposed by nematode damage by an increased content of diterpenic resin acids, specifically dehydroabietic and abietic acids, and of total unsaturated fatty acids with a predominance of 9-octadecenoic acid.

Preliminary study on early diagnosis of Alzheimer's disease in APP/PS1 transgenic mice using multimodal magnetic resonance imaging.

Alzheimer's disease (AD) has an insidious onset and lacks clear early diagnostic markers, and by the time overt dementia symptoms appear, the disease is already in the mid-to-late stages. The search for early diagnostic markers of AD may open a critical window for Alzheimer's treatment and facilitate early intervention to slow the progression of AD. In this study, we aimed to explore the imaging markers for early diagnosis of AD through the combined application of structural magnetic resonance imaging (sMRI), resting-state functional magnetic resonance imaging (rs-fMRI), and 1H-magnetic resonance spectroscopy (1H-MRS) multimodal magnetic resonance imaging (MRI) techniques at the animal experimental level, with the aim to provide a certain reference for early clinical diagnosis of AD. First, sMRI scans were performed on 4-month-old amyloid beta precursor protein/presenilin 1 (APP/PS1) transgenic AD model mice and wild type mice of the same litter using a 7.0 T animal MRI scanner to analyze the differential brain regions with structural changes in the gray matter of the brain by voxel-based morphometry (VBM). Next, rs-fMRI scans were performed to analyze the differential brain regions between groups for local spontaneous brain activity and functional connectivity (FC) between brain regions. Finally, 1H-MRS scans were performed to quantify and analyze intergroup differences in the relative concentrations of different metabolites within regions of interest (cortex and hippocampus). Compared with wild type mice, the volume of the left hippocampus, and right olfactory bulb of APP/PS1 transgenic AD model mice were reduced, the functional activity of the bilateral hippocampus, right piriform cortex and right caudate putamen was reduced, the functional network connectivity of the hippocampus was impaired, and the relative content of N-acetylaspartate (NAA)in the hippocampus was decreased. In addition, this study found that imaging changes in olfactory-related brain regions were closely associated with AD diagnosis, and these findings may provide some reference for the early diagnosis of AD.

Dietary and Biological Assessment of Omega-3 Status in University Rugby Football Players: A Case-Control Study

Background: Omega-3 fatty acid supplementation has been shown to help maintain muscle function and reduce muscle soreness after exercise-induced muscle damage. However, the relationship between the dietary and biological status of omega-3 fatty acids in rugby players remains unclear. Objectives: This study aimed to investigate the connection between the dietary and biological status of omega-3 fatty acids in university rugby players. Methods: We conducted a cross-sectional study involving university rugby players and age-matched sedentary controls. We assessed diets, including omega-3 and omega-6 polyunsaturated fatty acids, using self-administered dietary questionnaires. Whole blood lipidomics was performed before and after a single training session. Results: The rugby group (n = 29) had significantly higher intakes of omega-3 and omega-6 fatty acids compared to the control group (n = 31). While the blood omega-6 relative concentration did not differ between the groups, the rugby group had lower omega-3 fatty acid levels than the control group (4.4 ± 1.1 vs. 6.2 ± 1.8%). Approximately 48% of rugby players had an omega-3 index (O3i) considered as high risk for cardiovascular disease, and 52% were classified as intermediate risk. None of the players had a low-risk O3i. A single training session had an impact on the omega-3 and omega-6 metabolic pathways. Conclusions: Despite having a higher omega-3 fatty acid intake than controls, rugby football players may still be deficient in omega-3 fatty acids. Further nutritional interventions are needed to address these issues.