Regular Storage Research Articles

Cold storage conditions affect ‘Shepard’ avocado fruit ripening and quality

ABSTRACT There has been little research into long storage of ‘Shepard’ avocado. Simulated conditions for sea freight of Australian-grown fruit to key Asian markets were investigated. Thirteen storage treatments were applied to fruit of premium quality sourced from two commercial farms. Compared with the generally recommended 7°C, fruit stored at 5.5°C for up to 28 days were firmer at removal, slow to ripen, and had less severe flesh rots at the ripe stage. Compared with regular air storage (Air), controlled atmosphere (CA; 2% O2 and 5% CO2) decreased weight loss at removal, retarded ripening and, after 28 days of storage, reduced discrete patches on the skin of ripe fruit. However, CA storage also resulted in ripe fruit with more severe shrivel, stem end rot, and vascular browning. For 14 or 21 days at 5.5°C, Air resulted in the best overall quality of ‘Shepard’ fruit. CA was comparatively advantageous after a 28-day storage in improving external quality at ripe. There was considerable variation between both farms in storage effects on fruit ripening and quality. Given the high variability in fruit chilling responses apparently dependent on preharvest factors, further research is warranted to elucidate these results and better evaluate risks under commercial sea freight conditions.

Evaluation of municipal solid waste characterization and landfill gas power plant electrical energy production efficiency during COVID-19 pandemic

Due to the COVID-19 pandemic, the amount and types of municipal solid waste (MSW) have dramatically changed. This study focuses on characterizing the MSWs in the regular waste storage facility (RWSF) in Izmir, Turkey, and determining the electrical energy that can be produced by the landfill gas power plant (LFGPP) established to convert the waste to energy (WtE). Therefore, firstly the MSWs were characterized. After, the amount of produced methane (CH4) gas was determined using Landfill Gas Emissions Modeling (LandGEM). The amount of generated electricity, the dependent variable in the LandGEM model, was most influenced by the quantity of MSW, garbage disposal processes, and maintenance times of gas generators, while other factors remained relatively weak. This situation has also been confirmed in the field. During the COVID-19 pandemic, the increase in MSW was 9.8% in 2020 and 10.3% in 2021. Kitchen waste containing the highest CH4, accounted for 38% of the MSW characterization. The amount of generated electricity in the LandGEM model was 237 GWh in 2020 and 245 GWh in 2021. While these values could be achieved by 11.25% in 2020 due to various system and field failures, they reached 79.73% in 2021 due to system and field improvements.

Fabrication of multifunctional cotton fabrics with quaternized N-halamine endowing the synergetic rechargeable antibacterial, wound healing and self-cleaning performances

Cotton has attracted considerable attention due to its functional characteristics. The focus of research on cotton has shifted in recent years towards designing multi-functional and modified media for cotton fibers, which can be firmly combined with textiles, giving them reusability and extending their service life. This study constructed a synergistic antibacterial layer of quaternary ammonium compounds (QACs) and N-halamine (Hals) using an in-situ free radical copolymerization method in water, named QACs/Hals@cotton-Cl. The route significantly increases the number of antibacterial active centers. FTIR, XPS, and SEM were used to systematically analyze the product's chemical structure, surface morphology, and other characteristics. The modified fabric's antibacterial efficiency, wound healing, renewability, and durability were also evaluated. The chlorinated modified cotton fabric could completely eradicate S. aureus and E. coli within 10 min. Compared with pure cotton, it notably promoted the healing rate of infected wounds in mice. The modification method imparted excellent hydrophobicity to the cotton fabric, with a contact angle exceeding 130°, making it easy to remove surface stains. After 30 days of regular storage and 24 h of UV irradiation, the active chlorine concentration (Cl+%) only decreased by 25 % and 39 %, respectively, and the reduced Cl+% was effectively recharged via simple re-chlorination. The hydrophobicity and antimicrobial properties of QACs/Hals@cotton-Cl remained stable even after 20 cycles of friction. This simple synthesis technique provides a convenient approach for the scalable fabrication of multifunctional and rechargeable antibacterial textiles, with potential applications in medical devices and personal hygiene protection.

Effects of Delaying the Storage of 'Hass' Avocados under a Controlled Atmosphere on Skin Color, Bioactive Compounds and Antioxidant Capacity.

During ripening, 'Hass' avocado skin changes from green to purple/black. Low-temperature storage with a controlled atmosphere (CA) is the most widely used method for avocado storage; however, few studies have simulated this technology and considered the days of regular air (RA) storage prior to CA storage. Herein, the effect of delaying the storage of 'Hass' avocado (>30% dry matter) in a CA was examined. Long-term storage conditions (5 °C for 50 days) corresponded to (i) regular air storage (RA), (ii) CA (4 kPa O2 and 6 kPa CO2) and (iii) 10 days in RA + 40 days in a CA and (iv) 20 days in RA + 30 days in a CA. Evaluations were performed during storage and at the ready-to-eat (RTE) stage. Skin color remained unchanged during storage, but at the RTE stage, more color development was observed for fruits stored under CA conditions, as these fruits were purple/black (>50%). At the RTE stage, the anthocyanin content increased, and compared to fruit under RA, fruit under a CA contained a five-fold greater content. A 20-day delay between harvest and CA storage increased the fruit softening rate and skin color development after cold storage, reducing the effectiveness of CA as a postharvest technology for extending storage life.

Carbohydrate enzymes related to cold-induced sweetening and tuber storage in potato genotypes

ABSTRACT The roles of carbohydrate enzymes in cold-induced sweetening (CIS) and long-term tuber storage are not fully understood. This study analyzed enzyme activities in ‘Lady Rosetta’ (CIS-resistant and storable), ‘Kufri FryoM’ (CIS-resistant with regular storage), and ‘MS/8 1148’ (CIS-susceptible with regular storage) potatoes stored at 4°C for 0, 20, 120, and 150 days. CIS increased until 20 days, particularly in the basal ends of ‘MS/8 1148.’ Enzymes like sucrose synthase (breakdown), starch phosphorylase, and UDP-glucose pyro phosphorylase were positively correlated with CIS in ‘MS/8 1148.’ Starch levels were lower in ‘MS/8 1148’ at 20 days but increased in other genotypes. During extended storage, bound starch synthase and starch phosphorylase increased steadily up to 150 days, while soluble starch synthase peaked at 120 days. Sucrose phosphate synthase emerged as a critical marker for CIS resistance. Bound starch synthase and starch phosphorylase were identified as essential markers for long-term storage in potatoes.

Prediction of storage lifetime of rubber materials for flexible joint elastomers

To investigate the aging performance and storage lifetime of rubber materials used in flexible joint elastomers for solid rocket engines, a compression permanent deformation was used as the performance evaluation index to conduct aging tests on the elastic specimens of joint rubber materials at different temperatures. The results showed that the compression permanent deformation increased with the aging time and temperature, and the value of compression permanent deformation was greater in the initial stage of aging than in the later stage. Based on the regularity of material aging performance, the storage lifetime of rubber materials at room temperature of 25°C is extrapolated to be approximately 17.35 years through the linear equation of aging kinetics. Given that the aging mechanism remains unchanged, the calculation based on the principle of time-temperature equivalence reveals that as the aging temperature of the rubber material increases, the accelerated aging time to reach the regular storage lifetime becomes faster. Aging for 11.25 days at 140°C is equivalent to storing for this rubber material 15 years at 25°C. This research provides references for the future design, manufacturing, maintenance, and storage reliability of flexible joints.

Physico-Chemical and Bacteriological Quality of Household Drinking Water from Source to Point of Use in Akewu Community in Ibadan, Oyo State, Southwest, Nigeria

Poor household water storage is one of the major factors contributing to contamination of drinking water in Nigeria. Studies have shown that sizes of containers opening can affect water quality, but little has been documented on comparative effect of storage containers with different opening sizes in improving drinking water quality in Ibadan. This study was designed to assess the effect of different storage containers on household drinking water quality in selected communities in Ibadan. A quasi-experimental design was adopted. Four communities in Ibadan North Local Government namely; Akewu using protected springs as household drinking water sources were purposively selected. Forty-four households (11 from each community) were selected and randomly assigned to four treatment groups; those with Covered Buckets with Taps (CBT), Covered Buckets without Tap (CB), Covered Kegs with Taps (CKT) and Covered Kegs without Tap (CK). Prior to introducing the treatment containers, water samples were collected from their Regular Storage Containers (RSC) and springs for physicochemical and bacteriological analysis using standard methods. Participants were thereafter encouraged to store drinking water in the treatment containers provided for them. Water samples were later collected from CBT, CB, CKT and CK containers twice daily for 3 alternate days over two weeks for bacteriological analysis. In addition, oldest female of selected households were interviewed using a pre-tested semi-structured questionnaire to elicit information on their socio-demographic characteristics, storage container cleaning and handwashing practices. Results of physicochemical and bacteriological findings were compared with Standard Organisation of Nigeria (SON) guidelines. Data were analysed using descriptive statistics, t- test and ANOVA at p=0.05. At baseline, mean pH values of water samples from the springs and RSC were 6.4±0.6 and 7.1±0.7 respectively compared with 6.5-8.5 limits recommended by SON. Mean chloride concentration of springs (14.3±7.4mg/l) and RSC (19.3±10.0 mg/l) samples were below 250mg/l limit recommended by SON. Mean Total Coliform Count (TCC) of the springs in the four communities was 18.0±4.0 and mean TCC of RSC was 12.7±4.9 which exceeded the SON standard of 10MPN/100ml. Five percent of water samples from RSC had mean E.coli count of 100/100ml compared with SON guidelines of 0/100ml. The mean TCC after introducing CB, CBT, CK and CKT in all the communities were 10.0±4.0, 8.5±4.2, 6.9±2.8 and 7.3±3.7 respectively (p<0.05). No E.coli was found in the samples collected from the treatment storage containers. The percentage difference of coliform count in water from springs and RSC was 29.4% while percentage difference from RSC and CB, CBT, CK and CKT were 21.5%, 33.2%, 45.5% and 42.5% respectively. Mean age of the 44 respondents interviewed was 37.9±10.7years. Seventy-three percent washed their hands with only water after defecation and 95.0% stored water for cooking and drinking in the same container. Sixty-eight percent cleaned their containers weekly while 32.0% cleaned twice weekly.

Reasons for the appearance of skin burning disorder in ‘Gala’ apples from regular air storage

Reasons for the appearance of skin burning disorder in ‘Gala’ apples from regular air storage

Overview on the Biosecurity Measures of Salmonid Fish Farms: A Case Study in Italy

Italy is one of the main European producers of trout fish, and the most important producing area is the Autonomous Province of Trento (APT) in the North East. The objective of the study was to obtain a snapshot of the trout farms of the APT by identifying biosecurity factors, objectifying them, and classifying the establishments accordingly. Data from 62 salmonid farms were collected using a national checklist in which biosecurity elements were identified and assessed using the method of expert elicitation. The purpose was to evaluate the levels of biosecurity of a trout farm in order to rank the risk of introduction and spread of infectious fish diseases. The main critical factors identified during this study were as following: (i) cleaning and disinfection of the cargo truck; (ii) regular collection, storage, and disposal of dead fish; (iii) presence of anti-bird nets; (iv) use of dedicated equipment for the different sectors of the farm; and (v) presence of external areas dedicated to the loading of dead fish.

Performance Assessment of Household Water Treatment and Safe Storage in Kathmandu Valley, Nepal

Although many households in the Kathmandu Valley rely on household water treatment and safe storage (HWTS) to obtain drinking water, the safety of treated water has not been evaluated in actual usage. Therefore, we assessed the performance and maintenance of five HWTS methods used in 101 households. The choice of HWTS methods by households was primarily influenced by the raw water source, that is, jarred water users opted for boiling and groundwater users selected reverse osmosis with ultraviolet irradiation (RO-UV). While boiling and electric dispensers (ED) did not remove inorganic contaminants (ammonia nitrogen, arsenic, and manganese), ceramic candle filters (CCF) and RO-UV reduced them moderately. The HWTS methods reduced E. coli and total coliforms (TC) by 95.8 and 84.1%, respectively, but 11.8 and 69.3% of treated water samples remained positive for these two bacteria. Combined methods (CM) and RO-UV showed an inferior TC reduction compared to the simpler HWTS methods, boiling, CCF, and ED, possibly due to difficulties with regular maintenance and storage contamination. Therefore, it is recommended to choose simpler HWTS methods that meet the requirements of the household’s water sources rather than more expensive and difficult-to-maintain methods, which should be chosen only if the raw water contains high concentrations of inorganic contaminants.

A composite blockchain associated event traceability method for financial activities

The existing blockchain system mostly adopts the equal mining mode. All bookkeepers (entities) record the ledgers on a single main chain, and the data storage is random. Moreover, in complex or classified financial scenarios, the data of the main chain is difficult to realize association or regular storage, resulting in low efficiency of storage and query. At the same time, in the existing blockchain system, event traceability is mostly only found in the source block, and the implicit association between entities cannot be identified, so the query has limitations. To solve these problems, this paper proposes a composite blockchain associated event tracing method. This method firstly constructs the blockchain composite chain storage structure model, proposes the concept of private chain and alliance chain, and realizes the adaptive data association storage in complex or classified scenarios. Secondly, on the basis of obtaining the event source entity block, the auxiliary storage space is established to transfer storage relevant data. A tracing method of associated entity block based on the Apriori algorithm is proposed, and then the obtained traceability entity block is constructed as the source event correlation graph, so as to describe the association relationship between the event entities. Finally, a risk assessment system based on reinforcement learning is proposed to realize the risk assessment of traceability entity. Experiments show that the composite blockchain associated event tracing method proposed in this paper can reduce 60% of the storage overhead, improve 90% of the query accuracy and 50% of the security. can reduce the storage overhead by 60%, improve the query accuracy by 90% and improve security by 50%.

Wound-Healing Effects of Mesenchymal Stromal Cell Secretome in the Cornea and the Role of Exosomes.

Mesenchymal stromal/stem cells (MSCs) and their secreted factors have been shown to have immunomodulatory and regenerative effects. In this study, we investigated human bone-marrow-derived MSC secretome (MSC-S) for the treatment of corneal epithelial wounds. Specifically, we evaluated the role of MSC extracellular vesicles (EV)/exosomes in mediating the wound-healing effects of the MSC-S. In vitro studies using human corneal epithelial cells showed that MSC-CM increased cell proliferation in HCEC and HCLE cells, while EV-depleted MSC-CM showed lower cell proliferation in both cell lines compared to the MSC-CM group. In vitro and in vivo experiments revealed that 1X MSC-S consistently promoted wound healing more effectively than 0.5X MSC-S, and MSC-CM promoted wound healing in a dose-dependent manner, while exosome deprivation delayed wound healing. We further evaluated the incubation period of MSC-CM on corneal wound healing and showed that MSC-S collected for 72 h is more effective than MSC-S collected for 48 h. Finally, we evaluated the stability of MSC-S under different storage conditions and found that after one cycle of freeze-thawing, MSC-S is stable at 4 °C for up to 4 weeks. Collectively, we identified the following: (i) MSC-EV/Exo as the active ingredient in MSC-S that mediates the wound-healing effects in the corneal epithelium, providing a measure to optimize its dosing for a potential clinical product; (ii) Treatment with EV/Exo-containing MSC-S resulted in an improved corneal barrier and decreased corneal haze/edema relative to EV/Exo-depleted MSC-S; (iii) The stability of MSC-CM for up to 4 weeks showed that the regular storage condition did not significantly impact its stability and therapeutic functions.

Solid Waste Landfill Site Selection; Konya City Sample

In developing countries, consumption habits have changed with the increase in population, the development of technology and industrialization. For this reason, good management of the increase in the amount of solid waste by municipalities is very important for the health and sustainability of nature. The location of the facility to be established is important for the regular storage and efficient disposal of solid wastes. Site selection of landfill facilities in the ‘Site Management and Operation Guide for Landfill Facilities’ published by the General Directorate of Environmental Management; The ratio of the volume to the area, the distance to the buildings, the wind direction, the external view (landscape), the effect on the traffic on the side, the profit from the finished facility, and the effect on the water are evaluated under the sub-headings. With the ‘Konya Solid Waste Management Project’, ‘Aslım Sanitary Landfill’, which was used until 2017, was closed. Instead, the ‘Konya Solid Waste Landfill Site’, which was established in a different region to meet the need, was put into operation. In the study to be carried out in this context; Both fields were evaluated according to the specified criteria and compared with each other using the Analytical Hierarchy Method. As a result, it is aimed that the success rate of the location selection of the new solid waste storage area will be revealed and it will be a base for similar studies to be done in the future.

Analysis of Heat and Moisture Transfer and Thermal Comfort in Green Logistics Storage Space

Regular logistics storage spaces suffer a very high temperature during summer. To build a green logistics storage space, it is truly necessary to optimize the thermal environment in summer. At present, there are few related studies on the energy consumption, thermal environment and human comfort of green logistics storage spaces. Therefore, this paper analyzes the heat and moisture transfer in and studies the impacts of the thermal environment of green logistics storage space. Based on the survey results, a coupled heat-moisture transfer model of green logistics storage space was constructed, which consists of three parts - the envelope structure, the hot and humid indoor environment, and the heating, ventilation and air conditioning (HVAC) system. Based on the idea of linear regression, a model was established to predict human body’s subjective thermal sensation in green logistics storage space. The experiment showed the analysis results of heat and moisture transfer and thermal comfort in green logistics storage space, and verified the effectiveness of the proposed model.

Crop Load and Thinning Methods Impact Yield, Nutrient Content, Fruit Quality, and Physiological Disorders in ‘Scilate’ Apples

Most apple cultivars produce too many flowers to enable consistent yields of high-quality fruit, thus, crop load management (thinning) is an integral part of orchard management in modern apple cultivation. Crop load is managed by thinning excess flowers and/or fruit from a tree, however ideal targets vary between cultivars. In this two-year study, the effect of thinning methods at different levels of crop load on fruit quality and production, post-harvest storability and physiological disorders, and fruit and leaf nutrient content in ‘Scilate’ apples were investigated in southern Tasmania, Australia. Two thinning methods, artificial bud extinction (ABE) and hand thinning (HT), were compared at three levels of crop load: 3, 6, or 12 fruit cm−2 limb cross-sectional area (LCSA), described as low, medium, and high, respectively. During the second season, all the ABE and HT treatments received additional chemical thinning (CT). The results demonstrated that ABE consistently outperformed HT in terms of improved fruit set, return bloom, and fruit weight. The fruit quality parameters, such as flesh firmness, total soluble solids, dry matter content, malic acid content, and fruit shape, were also improved under the ABE regime, with these positive effects being the clearest in the second season. In general, high-quality fruits were obtained from the low and medium crop loads, while the fruit quality was poor for the high crop load trees, but the low crop load fruit had a slightly higher incidence of internal flesh browning (predominantly radial) and fruit softening after regular atmosphere storage. The crop load also impacted on the fruit and leaf mineral nutrient content, where fruit N, Ca, Mn, and Zn, and leaf N, Fe, Zn, and Cu content increased while fruit and leaf K declined with a higher crop load. High crop load, irrespective of the thinning regime, and HT with a medium crop load, induced severe biennial bearing, whereas, the fruit yield was relatively consistent with ABE, even with a medium crop load. We conclude that ABE with a medium crop load (around six fruit cm−2 LCSA) is an effective method of managing crop load and optimizing the fruit quality in ‘Scilate’ apples.

Controlled Atmosphere Storage Alleviates Hass Avocado Black Spot Disorder

As it was previously reported, black spot development in the skin of Hass avocado has been related to a decreased antioxidant defense system. The aim of this study was to investigate the effect of different postharvest storage conditions on controlling black spot development targeting their effect on the antioxidant system (non-enzymatic and enzymatic) of the skin. Four postharvest treatments (T1: regular air storage (RA) at 5 °C for 40 d; T2: controlled atmosphere storage (CA) of 4 kPa O2 and 6 kPa CO2 at 5 °C for 40 d; T3: 10 d RA + 30 d CA and T4: 5 µM methyl jasmonate (MeJA) for 30 s + 10 RA + 30 d CA) were tested on controlling black spot incidence in fruit from six orchards from different agroclimatic zones and harvests. Then, on two selected orchards and harvests, the evolution of total phenolics (TPC), antioxidant capacity (AC) and antioxidant enzymes (catalase (CAT), polyphenol oxidase (PPO), superoxide dismutase (SOD), peroxidase (POD), phenylalanine ammonia lyase (PAL)) was monitored. Results revealed that incidence of black spot disorder was not associated to an agroclimatic zone and harvest stage. Immediate application of CA (T2) controlled black spot development during prolonged storage (40 d) and under these conditions TPC content remained higher compared to the other treatments. No clear role of CAT, PPO, SOD, POD and PAL on controlling black spot was observed. The results obtained are of value for the Hass avocado supply chain since a clear performance of CA was evidenced that will result in reduction of postharvest losses associated to this problem.

Automation of Refrigeration Systems for Extending Shelf life of Fruits and Vegetables in Remote Areas for Economically Weaker Section

India is an agricultural country. During lockdown, there had been a big problem transporting the productionto cold storages. Considering the problem of villagers, a low cost and affordable refrigeration system is proposedhere. The time and cost of transportation through the cold chain and the storage are thus saved. This cold storageis automated to control the environmental conditions suitable for extending life of fruits and vegetables. It uses amicrocontroller to control humidity, temperature and CO2 level which is appropriate for the commodity to bestored by the farmer. It alerts the farmer before the expiry date of the stored commodity through a message on thephone number linked with the storage. It uses the water obtained from condensation on cooling ducts for humiditycontrol. To maintain the optimum level of CO2 inside the chamber, fresh air is circulated at regular intervals oftime. It consumes same power as a refrigerator would consume. It does not require continuous water supply orammonia as in regular cold storage systems. It can be easily customized for a particular user.

Influence of Hot Water and 1-Methylcyclopropane Treatments on Air-Stored Quince Fruit

The commercial application potential of hot water treatments against 1-Methylcyclopropane (1-MCP) treatments for maintaining quality of fruit in quince (Cydonia oblonga Mill. cv. ‘Eşme’) during long-term regular air storage was investigated. The fruits were treated with either hot water at 50 ± 1 °C for 3 and 5 min or two different 1-MCP (SmartFreshSM) concentrations (300 ppb and 1000 ppb) at 12 °C for 20 h. Then, all fruits were stored at 0 ± 1 °C temperature, 85–90% relative humidity and regular air conditioning for 6 months. The efficacy of postharvest treatments in some fruit treats was monitored at monthly intervals. Postharvest treatments did not remarkably affect physiological features of fruits, such as ethylene production and respiration rate. Hot water treatments and 1000 ppb 1-MCP treatments positively maintained flesh color, acidity, malic acid content, 5–caffeoylquinic acid and vitamin C levels, and alleviated flesh firmness and sensory expert analysis scores. Overall, hot water treatment, a non-chemical treatment, had a potential for maintaining quality in quince fruit during long-term regular air storage at 0 ± 1 °C temperature and 85–90% relative humidity conditions for 6 months.

Sistem Informasi Cargo Documentation Gudang Finished Goods Divisi Wafer PT.Mayora Indah Tbk

PT. Mayora Indah Tbk is a company engaged in the industry that produces food and beverage products, warehouse wafer division which is one of the places to store, or arrange stock of goods from the production, or activities for the management of incoming and outgoing goods needed control in its movement activities. The current process on the documentation of goods cargo often occurs input errors no. police or truck containers, the use of mobile phone memory storage for photo files, convoluted processes, prone to loss of photo evidence files, difficulty finding data evidence files if there are complaints from the expedition, as well as on employees checkers and helpers do not know the history of the data report. Therefore, a web-based application system is needed to facilitate the search of photo data if there are complaints from the expedition, neat and regular storage of photo data, and for all employees to know the history and report of the photo data. To build this application using data collection methods namely observation, interviews and library studies, analysis methods using PIECES, system design using UML (Unified Modeling Language), and testing using Black Box Testing, while the programming language used is PHP with sublime text editor, as well as for databases using MySQL. With this system for the photo documentation process facilitates the ongoing process, and the management of data reports more regularly.

Municipal Solid Waste Management: Circular Economy Evaluation in Turkey

With the increase in environmental negativities according to wastes, priority has been given to sustainable practices and thus the circular economy (CE), that is, the recycling of wastes to the economy, and related zero waste practices have gained priority in Turkey.Turkey produced 32.2 million tonnes of waste overall per year and it means that waste per capita is approximately 1.16 kg per day and also the average recycling rate of all waste in Turkey is 12.3% according to 2018 records of TurkStat. According to these data, 20.24% of the wastes are sent to the municipal garbage disposals, 67.20% is disposed of by the regular storage method and 38% is recycled by composting. Also, according to the 2016 data, wild storage in Turkey continues at 27%.In the present study, the relationships between the yearly population growth, the increase in waste and in disposal facilities, and in the number of waste disposal facilities were examined and some relevant evaluations were made for the coming years. The projections were calculated using the data of Turkey in the coming years, the amount of waste, the amount of recycled waste, and the number of facilities. The recommendations were presented and emphasis was made for the requirements of the application of circular economy in Turkey. As a result, the analysis results obtained showed that the increases in the amount of waste will increase both the amount of waste and the areas where the waste will be disposed of and will create serious problems in the future. A sustainable waste management system and circular economy practices require that recyclable wastes be collected separately at the source, and the recycling process is carried out in a planned structure and if possible, no waste is generated. Collecting wastes separately at the source and public participation and awareness-raising in the zero-waste process is a must for the success of this process.