Wide Region Research Articles

Transpolar Arcs Are Not Always Cusp‐Aligned: Evidence of HiLDA‐Aligned Arcs

AbstractTranspolar arcs (TPAs) are often cusp‐aligned. Especially when multiple TPAs appear simultaneously, they join at the auroral signature of the cusp. Here we investigate the dayside connection point of TPAs using Defense Meteorological Satellite Program measurements and identify three cases where the tip of the TPA ends in a localized brightening. One is a typical cusp spot with a TPA attached. The cusp appears just poleward of the oval with a near circular shape. In the second case, multiple cusp spots are observed over a 3 MLT wide region, each connected to a TPA. In the third case, the brightening at the tip of a TPA is identified as high‐latitude dayside aurora (HiLDA). Cusp aurora appears between the HiLDA and the duskside oval. Plasma flows and particle characteristics indicate a lobe origin of the HiLDA. Our results indicate a more complicated connection between TPAs and dayside aurora than previously anticipated.

Flexural behavior of UHPC wet joints for precast bridge deck panels

Over the past decade or so, ultra-high performance concrete (UHPC) has been increasingly used for wet joints of bridge deck panels (BDPs) in bridge superstructures. To evaluate the flexural performance of UHPC wet joints for precast bridge deck panels, a total of seven BDPs were designed, including one monolithic cast-in-place bridge deck panel (MCIPBDP), one precast bridge deck panel (PBDP) with NC wet joints, and five precast bridge deck panels (PBDPs) with UHPC wet joints. The design parameters included reinforcement types (straight bars and U-bars), U-bar lap details (contact lap splice and non-contact lap splice), filling materials (UHPC and NC), and joint widths (150 mm, 200 mm, 250 mm, and 500 mm). Three-point bending tests were performed to evaluate the flexural performance based on the failure mode, load-deflection curve, cracking width in the wet joint region, and stiffness degradation. The experimental results showed that it is feasible to replace 500-mm-width NC wet joints with 200-mm-width UHPC wet joints for PBDPs with U-bars. UHPC wet joints, with a width of 250 mm, effectively prevented straight bars from slipping. As the width of UHPC wet joints decreased, the failure mode shifted from shear failure to bending failure. In addition, the cohesion-friction hybrid model was proposed to simulate the behavior of joint interfaces. The FE analysis results demonstrated that the FE model and modeling method have high accuracy and general applicability. Finally, the flexural capacity calculation formula was developed according to the strut-and-tie model. The theoretical calculation results were in good agreement with test results.

Nanoscale wettability characterization—Interpreting droplet morphological evolution in nanopores

AbstractNanoscale wettability, crucial for various disciplines in science and engineering, challenges traditional theory, particularly the Young's equation. This study proposes and validates a modified format of the Young's equation under nano‐confinement and, for the first time, the nano‐confined droplet morphological evolution and transition are investigated from thermodynamic theories and molecular dynamics simulation. The morphologies of droplets in nano‐silts, identified as double‐cap, single‐cap, and bridge‐shaped, underscore the critical roles of line tension and nano‐confinement in characterizing wetting behavior. In hydrophobic nano‐slits, droplets transition from the double‐cap to the single‐cap shape at the critical point of = 0.31 and to bridge shape at the critical point of = 0.40. Moreover, the relative width of the neck region in the bridge‐shaped droplets is found to stabilize at ratio of 1.8. Particularly, linear relationships have been established between the droplet contact angle and the parameter , which identify condensation and breakage of droplets within hydrophobic nano‐slits. This model effectively characterizes nanoscale wettability, with precise droplet behavior predictions, which could be beneficial to enhance nano‐fluid dynamics understanding and its applications in science and engineering.

Numerical determination of the threshold magnetic field in superconducting strips and coils triggering dynamic resistance

Abstract The threshold magnetic field is a key parameter for evaluating the current decay caused by dynamic resistance in superconducting windings and magnets. For a DC-carrying superconducting slab under an AC parallel magnetic field, the analytical theory clearly shows that there is only one electric central line (ECL) across the slab width at the onset of dynamic-resistance. However, threshold magnetic fields in superconducting strips and coils have not been fully investigated. Based onthe one-ECL criterion, this paper first presents a method for numerically determining the threshold magnetic field via the evolving internal magnetic field in superconducting strips and coils. By probing transient electromagnetic behaviours, interestingly, we found a distinctive feature of superconducting strips in which a wide region of zero electrical field is observed when dynamic resistance/loss initially occurs. With increasing magnetic fields, this region gradually shrinks and eventually become the ECL. More importantly, this numerical method can analyse the local threshold magnetic field in a targeted coil turn. The ability to quantify threshold magnetic field provides a clear guidance on the acceptable level of ripple and harmonic magnetic fields for coil windings in superconducting maglev trains and field windings of superconducting machines operating at persistent current mode.

TeO[formula omitted]–BaO–Bi[formula omitted]O[formula omitted] tellurite optical glasses I. - Glass formation, structural, thermal and optical properties

The present study investigates the glass-forming ability (GFA), structural, thermal, and optical properties of the TeO2–BaO–Bi2O3 (TeBaBi) glass system, focusing on the mutual substitution trends of its constituent compounds. Prepared glasses were synthesized by the melt-quenching method at 900 °C and the GFA was extended by chemical compositions with lower TeO2 (55–85 mol.%) and higher Bi2O3 (5–15 mol.%) content via optimization of the synthesis process. The introduction of BaO and/or Bi2O3 results in the increase of the glass transition temperature (Tg≈327–384°C), molar volume (Vg≈28.9–33.1cm3mol−1) and optical basicity (OB≈0.97–1.03). Prepared TeBaBi glasses exhibit satisfactory thermal stability and wide spectral region of optical transparency from 0.4–6.5 μm with observed narrowing of optical window with higher TeO2 content. Compositional evolution of Tg may be described for the TeBaBi glasses using multilinear regression analysis with high correlation (r≥0.995) across the whole GFA region. The structure of studied TeBaBi glasses was investigated by Raman scattering and directly compared to the TeO2–ZnO–BaO (TZB) glass system prepared and characterized under identical conditions. Structural analysis revealed a similar degree of internal glass structure transformation regardless of whether a divalent zinc cation or trivalent bismuth cation is present.

A three-layer Hele-Shaw problem driven by a sink

In this paper, we investigate a sink-driven three-layer flow in a radial Hele-Shaw cell. The three fluids are of different viscosities, with one fluid occupying an annulus-like domain, forming two interfaces with the other two fluids. Using a boundary integral method and a semi-implicit time stepping scheme, we alleviate the numerical stiffness in updating the interfaces and achieve spectral accuracy in space. The interaction between the two interfaces introduces novel dynamics leading to rich pattern formation phenomena, manifested by two typical events: either one of the two interfaces reaches the sink faster than the other (forming cusp-like morphology), or they come very close to each other (suggesting a possibility of interface merging). In particular, the inner interface can be wrapped by the other to have both scenarios. We find that multiple parameters contribute to the dynamics, including the width of the annular region, the location of the sink, and the mobilities of the fluids.

Nonresonant central exclusive production from CMS+TOTEM

The central exclusive production of charged hadron pairs in pp collisions at a center-of-mass energy of 13[Formula: see text]TeV is examined, based on data collected in a special high-[Formula: see text] run of the LHC. Events are selected by requiring both scattered protons detected in the TOTEM Roman pots, exactly two oppositely charged identified particles in the CMS silicon tracker, and the energy–momentum balance of these four particles. The nonresonant continuum processes are studied with the invariant mass of the centrally produced two-pion system in the resonance-free region, [Formula: see text][Formula: see text]GeV or [Formula: see text][Formula: see text]GeV. Differential cross sections as functions of the azimuthal angle between the surviving protons, squared four-momenta, and two-hadron invariant mass are measured in a wide region of scattered protons with transverse momentum between 0.2 and 0.8[Formula: see text]GeV and for pion rapidities [Formula: see text]. A rich structure of interactions related to double pomeron exchange emerges. The parabolic minimum in the distribution of the two-proton azimuthal angle is observed for the first time. It can be understood as an effect of additional pomeron exchanges between the protons, and of the interference between the bare and the rescattered amplitudes. After model tuning, various physical quantities related to the pomeron cross section, proton–pomeron and hadron–pomeron form factors, trajectory slopes and intercepts, as well as coefficients of diffractive eigenstates of the proton are determined.

Study of direct and indirect risk assessment of landslide impacts on ultrahigh-voltage electricity transmission lines

Ultrahigh-voltage electricity systems are a vital part of energy networks, often across wide regions passing through mountainous terrains. The instability of slopes forming tower foundations along transmission lines poses a large risk to the entire energy network. Moreover, the tower foundations along extra-high-voltage electricity transmission lines are a very special type of element that are also highly vulnerable to landslides. In this study, an integrative risk assessment framework, including a hazard assessment, vulnerability analysis for the specified element at risk, and consequence estimation, is proposed to quantify the direct and indirect risks of landslides to power transmission lines. The Yanzi landslide, where a tower of the major ultrahigh-voltage transmission line from Sichuan (western China) to Shanghai (eastern China) has just been constructed, is taken as a case study. The correlation between landslide displacement and tower structure tilting is studied. In terms of the precipitation return period, factors of safety, failure probability, and deformation are simulated. A physical vulnerability curve is fitted by assuming a Weibull relationship between the horizontal deformation (hazard intensity) of the landslide and the tower inclination ratio. The total risk is calculated as the sum of the direct and indirect losses, among which the potential indirect risk due to tower damage is much greater than the direct risk. This work demonstrates the importance of landslide treatment strategies along electricity transmission lines by considering the potential indirect risks. The risk assessment model of landslides affecting ultrahigh-voltage electricity transmission lines proposed in this study could be useful for other types of indirect landslide risk evaluations.

The Impact of the Russia-Ukraine Conflict on Global Economic Stability and Political Security

The conflict between Russia and Ukraine has emerged as a significant geopolitical tension, with far-reaching implications for global stability and security. This paper intends to study the impact of the war on the worlds and regional economic development and political stability, and achieve some findings that may trigger further policy considerations in mitigating challenges and issues imposed by the war. Through literature reviews and comparison analysis, the findings reveal economic, political, and security consequences of the conflict. The disruption of trade flows, economic sanctions, and uncertainty have impacted both Russia and Ukraine, as well as the wider region and the world. Energy security concerns and shifts in military alliances have added to the complexity of the conflict. The expansion of NATO and increased rivalries between Russia and Western countries have further heightened tensions. Based on the findings, the paper concludes that the Russia-Ukraine conflict poses a significant threat to global economic stability and political security. It emphasizes the need for a multilateral approach to address the conflict and promote peace and stability in the region. Ceasefire agreements, humanitarian assistance, and reconstruction efforts are crucial steps towards long-term peace and development. The paper highlights the importance of prioritizing diplomatic solutions over short-term gains from the conflict. In summary, this paper intends to explore the implications of the Russia-Ukraine conflict on global stability and security, with findings that underscore the need for international cooperation and concerted efforts to mitigate the consequences of the conflict and foster a peaceful resolution.

Influence of ultrasonic assistance on the microstructure and friction properties of laser cladded Ni60/WC composite coatings

The effects of different ultrasonic vibration powers on the distribution, phase structure, friction and wear properties of WC reinforced particles in laser melted Ni60/WC composite coatings are investigated. The effects of ultrasonic vibration on the microstructure, elemental distribution, crystal orientation, friction and wear properties of the fused coatings are analyzed. The experimental results show that the deposition of WC particles in the lower and middle parts of the coating is significantly improved after the introduction of ultrasonic vibration during the fusion cladding process. In particular, at 600 W ultrasonic power, not only the distribution uniformity of tungsten carbide particles in the coating is optimal, but also the composite coating shows better wear resistance. However, too much ultrasonic power increases the possibility of particle agglomeration. In addition, although the phase pattern of the coating does not change after ultrasonic vibration, the width of the columnar crystalline region of the coating is reduced, and the coating is covered by a homogeneous lamellar nanoscale eutectic structure with the phase compositions of the γ-(Fe, Ni) and M23C6 phases. The ultrasonic vibration improves elemental segregation of the coating, reduces the large number of precipitated phases in the coating, weakens the grain growth orientation, and relieves the local stress concentration in the coating. In addition, the mechanism of the influence of WC particles on the microstructure evolution and wear resistance of the composite coatings is discussed.

Laser modulation to plateau region and intensity of high-order harmonic generation in monolayer MoTe2

Abstract Through solving semiconductor Bloch equations, we theoretically investigated the high-order harmonic generation in monolayer MoTe2 under laser modulation. Adjusting the laser parameters, the plateau region and intensity of harmonics can be effectively regulated. Changing laser wavelength can regulate the width of platform region and the cutoff order of harmonic spectrum. Platform region widens with the increase of laser wavelength. Under different laser wavelengths, the number of photons that need to be absorbed for electron transition varies, which affects the inter-band transition of electrons. Laser vector potential also varies with the wavelength, affecting the intra-band motion of electrons. Laser field strength can significantly change the harmonic intensity. As the laser field strength increases, the harmonic intensity increases and may generate new plateau in the high-energy region. The emergence of new platform is due to the transition of electrons between conduction bands. Our work provides a theoretical exploration for generating high quality harmonics and understanding the micro mechanism of high-order harmonic generation.

Achieving High Doping Density in pH-neutral Conjugated Polyelectrolyte Toward Effective Hole-Transporting Materials for Organic Solar Cells.

The lack of effective and non-corrosive hole-transporting layer (HTL) materials has remained a long-standing issue that severely restricts the performance of organic solar cells (OSCs). Most pH-neutral conjugated polyelectrolytes (CPEs) exhibit inferior performance to the acid-doped HTL materials due to their low doping density. In this study, a series of pH-neutral CPEs is designed and synthesized with high doping density as HTL materials. Through an elaborate synthetic route, two sulfonate-terminating alkoxyl side chains can be introduced into thiophene, by which the electron-rich, highly soluble, and chemically stable thiophene monomer is synthesized to enable the subsequent polymerization. The CPE PTT-F exhibit a remarkable self-doping property with an enhanced doping density from 2.01 × 1017 to 7.02 × 1018 cm-3. The high work function and the increased doping density of PTT-F-based HTL decrease the depletion region width from 38.4 to 8.1nm at the anode interface, which minimized the energy loss in hole transport. Consequently, a binary OSC modified by PTT-F-based HTL achieve a high PCE of 18.8%. To the best of the knowledge, this is the highest PCE for OSC employing CPE-based HTL. The results from this work demonstrate an encouraging achievement of realizing exceptional hole collection ability in pH-neutral CPEs.

Secondary vertex reconstruction with MaskFormers

In high-energy particle collisions, the reconstruction of secondary vertices from heavy-flavour hadron decays is crucial for identifying and studying jets initiated by b- or c-quarks. Traditional methods, while effective, require extensive manual optimisation and struggle to perform consistently across wide regions of phase space. Meanwhile, recent advancements in machine learning have improved performance but are unable to fully reconstruct multiple vertices. In this work we propose a novel approach to secondary vertex reconstruction based on recent advancements in object detection and computer vision. Our method directly predicts the presence and properties of an arbitrary number of vertices in a single model. This approach overcomes the limitations of existing techniques. Applied to simulated proton-proton collision events, our approach demonstrates significant improvements in vertex finding efficiency, achieving a 10% improvement over an existing state-of-the-art method. Moreover, it enables vertex fitting, providing accurate estimates of key vertex properties such as transverse momentum, radial flight distance, and angular displacement from the jet axis. When integrated into a flavour tagging pipeline, our method yields a 50% improvement in light-jet rejection and a 15% improvement in c-jet rejection at a b-jet selection efficiency of 70%. These results demonstrate the potential of adapting advanced object detection techniques for particle physics, and pave the way for more powerful and flexible reconstruction tools in high-energy physics experiments.

Deep Learning for Generating Time-of-Flight Camera Artifacts.

Time-of-Flight (ToF) cameras are subject to high levels of noise and errors due to Multi-Path-Interference (MPI). To correct these errors, algorithms and neuronal networks require training data. However, the limited availability of real data has led to the use of physically simulated data, which often involves simplifications and computational constraints. The simulation of such sensors is an essential building block for hardware design and application development. Therefore, the simulation data must capture the major sensor characteristics. This work presents a learning-based approach that leverages high-quality laser scan data to generate realistic ToF camera data. The proposed method employs MCW-Net (Multi-Level Connection and Wide Regional Non-Local Block Network) for domain transfer, transforming laser scan data into the ToF camera domain. Different training variations are explored using a real-world dataset. Additionally, a noise model is introduced to compensate for the lack of noise in the initial step. The effectiveness of the method is evaluated on reference scenes to quantitatively compare to physically simulated data.

Using Extensive Core‐Reflected Phases to Constrain Sharp Inner Core Boundary Beneath East Asia

AbstractThe physical properties of the Earth's inner core boundary (ICB) are crucial for understanding inner core growth and geodynamo generation. In this study, we analyze the differential travel time residuals (DTTRs) and waveform similarities of the core‐reflected phases (PKiKP and PcP) to investigate fine‐scale seismic structures of the ICB. To study the ICB beneath East Asia, we collect a total of 4,272 PKiKP and PcP phase pairs from 37 earthquakes occurring from January 2009 to December 2018 recorded by permanent stations in the Chinese Digital Seismic Network (CDSN). This extensive PKiKP dataset allows for a geographically continuous depiction of the ICB beneath East Asia, revealing a diverse scope on its topography and sharpness. There are three main findings in our study. First, we collect a comprehensive PKiKP and PcP dataset with extensive ray coverage across East Asia. Numerous weak precritical PKiKP signals are detected, enabling robust constraints on the ICB across wide regions. Second, the PKiKP‐PcP DTTRs exhibit an average offset of −0.25 s (ranging from −1.5 to 1.0 s) relative to the PREM model, suggesting the outer core is approximately 1.3 km thinner than predicted by the PREM model, although it remains largely consistent with it. Third, the bin‐stacked PKiKP and PcP waveforms show high similarity across most sampled areas, indicating that the ICB thickness is no more than 2 km mostly beneath East Asia, which aligns with the hypothesis of a rapid transition from the solid inner core to the liquid outer core in our study region.

In situ seed layer bandgap engineering leading to the conduction band offset reversion and efficient Sb2Se3 solar cells with high open-circuit voltage

Sb2Se3 solar cells have achieved a power conversion efficiency (PCE) of over 10%. However, the serious open-circuit voltage deficit (VOC-deficit), induced by the hard-to-control crystal orientation and heterojunction interface reaction, limits the PCE of vapor transport deposition (VTD) processed Sb2Se3 solar cells. To overcome the VOC-deficit problem of VTD processed Sb2Se3 solar cells, herein, an in-situ bandgap regulation strategy is innovatively proposed to prepare a wide band gap Sb2(S,Se)3 seed layer (WBSL) at CdS/Sb2Se3 heterojunction interface to improve the PCE of Sb2Se3 solar cells. The analysis results show that the introduced Sb2(S,Se)3 seed layer can enhance the [001] orientation of Sb2Se3 thin films, broaden the band gap of heterojunction interface, and realize a “Spike-like” conduction band alignment with ΔEc = 0.11 eV. In addition, thanks to the suppressed CdS/Sb2Se3 interface reaction after WBSL application, the depletion region width of Sb2Se3 solar cells is widened, and the quality of CdS/Sb2Se3 interface and the carrier transporting performance of Sb2Se3 solar cells are significantly improved as well. Moreover, the harmful Se vacancy defects near the front interface of Sb2Se3 solar cells can be greatly diminished by WBSL. Finally, the PCE of Sb2Se3 solar cells is improved from 7.0% to 7.6%; meanwhile the VOC is increased to 466 mV which is the highest value for the VTD derived Sb2Se3 solar cells. This work will provide a valuable reference for the interface and orientation regulation of antimony-based chalcogenide solar cells.

Retinal vascular changes after Silicon Oil removal in the Eye with Rhegmatogenous Retinal detachment

BackgroundThis study aims to examine vessel density changes in the optic nerve and macula following silicone oil removal (SOR) surgery in eyes with rhegmatogenous retinal detachment (RRD) at different time points by Optical Coherence Tomography Angiography (OCTA) in compared to the contralateral eye.MethodsA total of 43 eyes from 43 patients with silicone oil in their eyes for 3–9 months underwent OCT-A using AngioVue and optic disc-associated vessel density (VD) and thickness, macular-associated VD and thickness, Foveal avascular zone (FAZ) area, FAZ perimeter (PERIM), Acircularity index (AI), vessel density within a 300 μm wide region of the FAZ were compared between eyes. OCTA scans were performed one week before SOR and one month and three months after SOR.ResultsThe mean age of participants was 52.8 years (SD = 15.85) and a median visual acuity was 0.8 (range: 0.5-1.0). Notably, male participants constituted 67.4% of the sample. The preoperative mean value BCVA (logMAR) of patients was 0.73, and 3 months post-oil removal was 0.7727. Regarding optic disc parameters, RNFL thickness and vessel density (VD) measurements Peripapillary, whole disc, inside disc, and Disc Angio (superior, Nasal, inferior, temporal) did not change.In analyzing macular thickness parameters, all of them (Whole and Fovea, parafoveal, and Perifovea) remained unchanged. Examining macular vessel density parameters revealed no significant changes across superficial and deep retinal layers. Finally, the comparison of the foveal avascular zone (FAZ) area and flow density (FD) parameters demonstrated consistent measurements with non-significant alterations observed in FAZ size (p = 0.6) and FD values (p = 0.49) over the monitored duration.ConclusionThere was no change in peripapillary VD and macular vessel density of the superficial capillary plexus (SCP) and deep capillary plexus (DCP) after silicone oil removal. FAZ and full retinal thickness remained stable 3 month after SOR. Clinical trial number: Not applicable.

End-to-end training of acoustic scene classification using distributed sound-to-light conversion devices: verification through simulation experiments

We propose a framework for classifying acoustic scenes utilizing distributed sound sensor devices capable of sound-to-light conversion, which we term as Blinkies. These Blinkies can convert acoustic signals into varying intensities of light via an inbuilt light-emitting diode. By using Blinkies, we can aggregate the spatial acoustic information across a wide region by recording the fluctuating light intensities of numerous Blinkies distributed throughout the region. Nonetheless, the signal communicated is subject to the bandwidth limitation imposed by the frame rate of the video camera, typically capped at 30 frames per second. Our objective is to refine the process of transforming sound into light for the purpose of acoustic scene classification within these bandwidth confines. While traversing through the air, a light signal is affected by inherent physical limitations such as the attenuation of light and interference from noise. To account for these factors, we have integrated these physical constraints into differentiable physical layers. This approach enables us to jointly train a pair of deep neural networks for the conversion of sound to light and for the classification of acoustic scenes. Our simulation studies, which employed the SINS database for acoustic scene classification, demonstrated that our proposed framework outperforms the previous one that utilized Blinkies. These findings emphasize the effectiveness of Blinkies in the field of acoustic scene classification.

Transitions between Localised Patterns with Different Spatial Symmetries in Non-Local Hyperbolic Models for Self-Organised Biological Aggregations

Pattern formation in biological aggregations is a topic of great interest, due to the complex spatial structure of various aggregations of cells/bacteria/animals that can be observed in nature. While many such aggregations look similar at the macroscopic level, they might differ in their microscopic spatial structure. However, the complexity of the non-linear and sometimes non-local interactions among individuals inside these aggregations makes it difficult to investigate these spatial structures. In this study, we investigate numerically the transitions between different spatial patterns of animal aggregations with various symmetries (even, odd or no symmetry) that characterise the microscopic distribution of individuals inside these aggregations. To this end, we construct a bifurcation diagram starting with perturbations of spatially homogeneous solutions with low, medium, and high amplitudes. For perturbations with low amplitudes, the bifurcating structures show transitions among even-symmetric, odd-symmetric, and non-symmetric solutions. For perturbations with large amplitudes, there are wide parameter regions with non-convergent solutions, characterised by oscillatory transitions between different relatively similar solutions. These numerical results emphasize: (i) the effect of nonlinear and non-local interactions on the microscopically different symmetric/non-symmetric structures of macroscopically similar ecological aggregations; (ii) the difficulty of developing continuation algorithms for this class of non-local models.

Retrieval of boundary layer precipitable water from GOES ABI using machine learning techniques

Abstract Low-level moisture is an important ingredient for forecasting severe storms, especially over the Great Plains where severe storms often develop along the dryline. Although ground-based observation systems such as lidar or radiosondes on weather balloons provide accurate information on low-level moisture, data are provided at limited locations, and the low temporal resolution of radiosondes makes it difficult to track a rapidly developing dryline. Geostationary satellites provide high spatial and temporal observation, but the channels of current geostationary satellites are mostly sensitive to water vapor at mid to upper levels. However, the split window difference (SWD) between the “clean” window channel (10.3 μm) and the “dirty” window channel (12.3 μm) is commonly used for estimating low-level water vapor. However, this estimation is complicated by surface temperature contributions, dependence on the lapse rate, and nonlinear relationships between SWD and moisture. This study applies machine learning techniques to infer boundary layer precipitable water (BLPW) from Geostationary Operational Environmental Satellite (GOES) Advanced Baseline Imager (ABI) data. Since there are few observations that cover wide regions for training convolutional neural networks, especially for the atmosphere above the surface, High-Resolution Rapid Refresh (HRRR) model outputs are used as the truth for training. Statistical results show that using ABI channel 13, 14, and 15 brightness temperatures, skin temperature, solar zenith angle, and GOES total precipitable water product as additional inputs show the lowest MSE. Case study results show that the model developed in this study is good at capturing strong moisture gradients and depicting a dryline.