Protoplast Regeneration Research Articles

Advancements in plant transformation: from traditional methods to cutting-edge techniques and emerging model species.

The ability to efficiently genetically modify plant species is crucial, driving the need for innovative technologies in plant biotechnology. Existing plant genetic transformation systems include Agrobacterium-mediated transformation, biolistics, protoplast-based methods, and nanoparticle techniques. Despite these diverse methods, many species exhibit resistance to transformation, limiting the applicability of most published methods to specific species or genotypes. Tissue culture remains a significant barrier for most species, although other barriers exist. These include the infection and regeneration stages in Agrobacterium, cell death and genomic instability in biolistics, the creation and regeneration of protoplasts for protoplast-based methods, and the difficulty of achieving stable transformation with nanoparticles. To develop species-independent transformation methods, it is essential to address these transformation bottlenecks. This review examines recent advancements in plant biotechnology, highlighting both new and existing techniques that have improved the success rates of plant transformations. Additionally, several newly emerged plant model systems that have benefited from these technological advancements are also discussed.

Interspecific hybridization and cell engineering of lettuce (Lactuca L.)

Lactuca sativa L. is a leafy vegetable crop of the Asteraceae family, widely cultivated throughout the world. The main breeding trends for lettuce include higher yields, better taste quality, earliness, and resistance to abiotic and biotic stressors. Some wild Lactuca spp. have actively been employed by lettuce breeders as donors of resistance to various diseases. Conventional and biotechnological breeding methods are both currently used to develop new lettuce cultivars. This is an overview of the main advances in the production of interspecific Lactuca hybrids, including the use of cell and tissue culture techniques, and genetic engineering. Studying artificial hybridization and natural populations makes it possible to identify evolutionary relationships among various Lactuca spp. Somatic hybridization is an overlooked but promising technology in Lactuca breeding: it allows a breeder to obtain a wider range of variations, and is beyond the strict control by GMO laws. This technique faces problems associated with complicated protoplast regeneration and the loss of reproductive ability in hybrids. Genome-editing methods are more effective and better controllable, but society is still wary of any interference with the plant genome and legally regulates the sale of GM products as food. Thus, researchers are challenged with the task to improve these techniques.

A Comparison of DNA-Methylation during Protoplast Culture of Ponkan Mandarin (Citrus reticulata Blanco) and Tobacco (Nicotiana tabacum L.)

The epigenetic variation in protoplast regeneration is a topic that has attracted interest recently. To elucidate the role of DNA methylation in the regeneration of protoplasts from the ponkan (Citrus reticulata), this study employs the methylation-sensitive amplification polymorphism (MSAP) molecular marker technique to analyze changes in DNA methylation levels and patterns during the isolation and culture of protoplasts from ponkan and tobacco. Additionally, differential DNA methylation fragments are cloned, sequenced, and subjected to bioinformatics analysis. The results reveal that, for non-regenerable ponkan mesophyll protoplasts, DNA methylation levels increase by 3.98% after isolation and then show a trend of initial decrease followed by an increase during culture. In contrast, for regenerable ponkan callus protoplasts and tobacco mesophyll protoplasts, DNA methylation levels decrease by 1.75% and 2.33%, respectively, after isolation. During culture, the DNA methylation levels of ponkan callus protoplasts first increase and then decrease, while those of tobacco mesophyll protoplasts show an opposite trend of initial decrease followed by an increase. Regarding DNA methylation patterns, ponkan mesophyll protoplasts exhibit primarily hypermethylation changes accompanied by a small amount of gene demethylation, whereas ponkan callus protoplasts are dominated by demethylation changes with some genes undergoing hypermethylation. The methylation exhibits dynamic changes in protoplast isolation regeneration. By recovering, cloning, sequencing, and performing BLASTn alignment analysis on specific methylation modification sites in the ponkan, 18 DNA sequences with high homology are identified which are found to be involved in various biological functions, thereby establishing a foundational basis for genetic editing in protoplasts.

Modern Technologies Provide New Opportunities for Somatic Hybridization in the Breeding of Woody Plants.

Advances in cell fusion technology have propelled breeding into the realm of somatic hybridization, enabling the transfer of genetic material independent of sexual reproduction. This has facilitated genome recombination both within and between species. Despite its use in plant breeding for over fifty years, somatic hybridization has been limited by cumbersome procedures, such as protoplast isolation, hybridized-cell selection and cultivation, and regeneration, particularly in woody perennial species that are difficult to regenerate. This review summarizes the development of somatic hybridization, explores the challenges and solutions associated with cell fusion technology in woody perennials, and outlines the process of protoplast regeneration. Recent advancements in genome editing and plant cell regeneration present new opportunities for applying somatic hybridization in breeding. We offer a perspective on integrating these emerging technologies to enhance somatic hybridization in woody perennial plants.

Central composite design for optimizing istamycin production by Streptomyces tenjimariensis.

Istamycins (ISMs) are 2-deoxyfortamine-containing aminoglycoside antibiotics (AGAs) produced by Streptomyces tenjimariensis ATCC 31603 with broad-spectrum bactericidal activities against most of the clinically relevant pathogens. Therefore, this study aimed to statistically optimize the environmental conditions affecting ISMs production using the central composite design (CCD). Both the effect of culture media composition and incubation time and agitation rate were studied as one factor at the time (OFAT). The results showed that both the aminoglycoside production medium and the protoplast regeneration medium gave the highest specific productivity. Results also showed that 6days incubation time and 200rpm agitation were optimum for their production. A CCD quadratic model of 17 runs was employed to test three key variables: initial pH, incubation temperature, and concentration of calcium carbonate. A significant statistical model was obtained including, an initial pH of 6.38, incubation temperature of 30 ˚C, and 5.3% CaCO3 concentration. This model was verified experimentally in the lab and resulted in a 31-fold increase as compared to the unoptimized conditions and a threefold increase to that generated by using the optimized culture media. To our knowledge, this is the first report about studying environmental conditions affecting ISM production as OFAT and through CCD design of the response surface methodology (RSM) employed for statistical optimization. In conclusion, the CCD design is an effective tool for optimizing ISMs at the shake flask level. However, the optimized conditions generated using the CCD model in this study should be scaled up in a fermenter for industrial production of ISMs by S. tenjimariensis ATCC 31603 considering the studied environmental conditions that significantly influence the production proces.

A pooled mycoviral resource in a strain of Rhizoctonia solani are regulators of fungal virulence

Rhizoctonia solani is a widespread and devastating soil-borne plant fungal pathogen that causes diseases, including rice sheath blight, which are difficult to control. Some mycoviruses are potential biocontrol agents for the control of fungal diseases. In order to investigate the factors that influence the virulence of R. solani and search for mycoviruses with the potential for biocontrol of R. solani, a rice-infecting R. solani strain, ZJXD1–1, was isolated and confirmed to contain eight mycoviruses via dsRNA extraction and high-throughput sequencing. The identified mycoviruses belong to families of Endornaviridae (RsEV11 and RsEV12) and Mitoviridae (RsMV125 to RsMV129), and an unclassified Toti-like clade (RsTLV1). The C39 domain in RsEV12, which shares a close evolutionary relationship with bacteria, is observed for the first time in a mycovirus. Strains with different virus combinations were obtained through viral horizontal transfer, and pathogenicity test deduced that the Endornaviruses RsEV11 and RsEV12, and Mitovirus RsMV129 might potentially enhance the pathogenicity of R. solani, while RsMV125 might reduce the virulence or interfere with the function of other Mitoviruses. Furthermore, virus curing via protoplast regeneration and viral horizontal transfer demonstrated that RsMV129 is the causal agent of R. solani hypervirulence. Overall, our study provided the resource pool of viruses that may contribute to the discovery of new biocontrol agents against R. solani and enhance our understanding of the pathogenesis of R. solani regulated by mycoviruses.

Colour change in potato (Solanum tuberosum L.) tubers by disruption of the anthocyanin pathway via ribonucleoprotein complex delivery of the CRISPR/Cas9 system

Potato is an important part of the traditional Norwegian diet, and the crop faces several challenges with respect to pests and diseases, as well as the increasingly challenging changes in climate. Genome editing may provide tools to improve the resilience of Norwegian potato cultivars to new climate challenges. We have altered the skin colour of two potato cultivars, ‘Desirée’ and ‘Nansen’ from red to yellow, as a proof-of-concept for the use of CRISPR/Cas9 in a Norwegian cultivar. Our method has involved the use of protoplasts and we have grown the regenerants for three successive clonal tuber generations to evaluate the stability of the edited plants over time and under varying temperature conditions in contained rooms in a greenhouse. We found that the protoplast method is well suited to achieving CRISPR/Cas9 applications. The results show that the yellow skin is consistent over the three generations of tuber propagation. We found some suspected somaclonal variation in the protoplast regenerants. Some of the variation which we observed under high temperatures (up to nearly 40ºC) during the second growth cycle, disappeared when cultivated under lower temperatures in the third cultivation cycle.

Phytosulfokine alpha enhances regeneration of transformed and untransformed protoplasts of Brassica oleracea.

Phytosulfokine-α (PSK-α) is a disulfated pentapeptide (YIYTQ) acting as an intercellular signal peptide and growth factor. It was originally isolated from conditioned medium of asparagus mesophyll cell cultures in 1996 and later characterized as a hormone-like signal molecule with important roles in numerous processes of in vivo plant growth and development. It is currently becoming a valuable mitogenic factor in plant breeding and biotechnology due to its stimulatory effect on in vitro cell elongation, proliferation and differentiation. The focus of our work was to review current knowledge about the roles of PSK-α in plant biotechnology and to evaluate its influence on the regeneration of protoplasts of four Brassica oleracea cultivars (two cauliflower and two cabbage) cultured under two distinctive protocols and with different protoplast densities. Protoplast regeneration was studied due to its high value for plant genome editing, which is generally limited by the inefficient regeneration of treated protoplasts of numerous important plant genotypes. Our hypothesis was that the stress related to PEG-mediated protoplast transformation and the following decrease in viable protoplast density in culture could be alleviated by the addition of PSK-α to the culture medium. We therefore tested whether PSK-α could increase cell division at the early stages of culture (5 and 15 days after protoplast isolation) and stimulate the formation of microcallus colonies up to the 30st day of culture and to evaluate its influence on callus organogenesis leading to shoot regeneration. The PSK-α showed a strong stimulatory effect on untransformed protoplast regeneration already during the first days of culture, accelerating cell division up to 5.3-fold and the formation of multicellular microcallus colonies up to 37.0-fold. The beneficial influence was retained at later stages of regeneration, when PSK improved shoot organogenesis even if it was present only during the first 10 days of culture. The highest numbers of shoots, however, were regenerated when PSK was present during the first days of culture and later in solid shoot regeneration medium. Finally, the addition of PSK-α to PEG-transformed protoplasts significantly enhanced their division rate and the formation of microcallus colonies in selection media, up to 44.0-fold.

Efficient regeneration of protoplasts from Solanum lycopersicum cultivar Micro-Tom.

Protoplast regeneration has become a key platform for genetic and genome engineering. However, we lack reliable and reproducible methods for efficient protoplast regeneration for tomato (Solanum lycopersicum) cultivars. Here, we optimized cell and tissue culture methods for protoplast isolation, microcallus proliferation, shoot regeneration, and plantlet establishment of the tomato cultivar Micro-Tom. A thin layer of alginate was applied to protoplasts isolated from third to fourth true leaves and cultured at an optimal density of 1 × 105 protoplasts/ml. We determined the optimal culture media for protoplast proliferation, callus formation, de novo shoot regeneration, and root regeneration. Regenerated plantlets exhibited morphologically normal growth and sexual reproduction. The entire regeneration process, from protoplasts to flowering plants, was accomplished within 5 months. The optimized protoplast regeneration platform enables biotechnological applications, such as genome engineering, as well as basic research on plant regeneration in Solanaceae species.

Enhancing Protoplast Isolation and Early Cell Division from Cannabis sativa Callus Cultures via Phenylpropanoid Inhibition.

De novo regeneration of Cannabis sativa L. (cannabis) using tissue culture techniques remains unreliable and infrequent. Conventional methods for the regeneration and transformation of cannabis have not achieved the reliability and replicability that need to be integrated into research and breeding programs. Protoplast systems are effective for gene expression studies and transformation and genome-editing technologies and open the possibility of somatic hybridization to create interspecific hybrids. To date, leaf-derived protoplasts have been isolated for transient gene expression studies, but protoplast-to-plant regeneration has not been reported. The present study aims to evaluate the efficacy of using a callus culture system as an abundant tissue source for protoplast isolation and lays the groundwork for a protoplast-to-plant regeneration system. Using hypocotyl-derived callus cultures, which are known to have relatively greater regenerative potential, the efficacy of protoplast isolation and initial cell division were assessed. In this study, the effect of 2-aminoindane-2-phosphonic acid (AIP), a competitive inhibitor of phenylalanine ammonia lyase (PAL), in callus culture media and the effect of subculture frequency on protoplast yield were assessed. This study found that inclusion of AIP at 1 mM resulted in a 334% increase in protoplast yield compared with AIP-free medium, representing the first known use of AIP in cannabis tissue culture. Inclusion of AIP led to a 28% decrease in total soluble phenolics and 52% decrease in tissue browning compared with the control medium. Lastly, a two-phase culture system for protoplast regeneration was tested. At a concentration of 2.0 × 105 protoplasts per mL, cell wall reconstitution and cell division were observed, providing one of the first know reports of cell division from cannabis protoplasts and setting the stage for the future development of a protoplast-to-plant regeneration system.

Phytosulfokine peptide library: chemical synthesis and biological evaluation on protoplast regeneration

A focussed library of 12 phytosulfokine analogues are synthesized and evaluated as artificial plant peptide hormones to boost regeneration of plant protoplasts.

Isolation and regeneration of cell suspension-derived Foeniculum vulgare protoplasts

Hybrid development incorporating lines with cytoplasmic male sterility (CMS) has become an increasingly effecting technique for utilizing heterosis in vegetable crops. Currently, somatic hybridization has become prevalent in the Apiaceae family, which includes carrots, celery, and leeks. Therefore, as a first step, a simple and efficient protocol for isolating and regenerating protoplasts is established for the commercial fennel hybrid “Dragon” as a source of CMS that will be transferred later into carrot via protoplast fusion. To this end, cell suspensions from Dragon were initiated as a source for protoplast isolation.

Breeding a new Ganoderma lucidum strain with increased contents of individual ganoderic acids by mono-mono crossing of genetically modified monokaryons.

Ganoderic acids (GAs) are major functional components of Ganoderma lucidum. The study aimed to breed a new G. lucidum strain with increased contents of individual GAs. Two mating-compatible monokaryotic strains, G. 260125 and G. 260124, were successfully isolated from the dikaryotic G. lucidum CGMCC 5.0026 via protoplast formation and regeneration. The Vitreoscilla hemoglobin gene (vgb) and squalene synthase gene (sqs) were overexpressed in the monokaryotic G. 260124 and G. 260125 strain, respectively. Mating between the G. 260124 strain overexpressing vgb and the G. 260125 strain overexpressing sqs resulted in the formation of the new hybrid dikaryotic G. lucidum strain sqs-vgb. The maximum contents of ganoderic acid (GA)-T, GA-Me, and GA-P in the fruiting body of the mated sqs-vgb strain were 23.1, 15.3, and 39.8 μg/g dry weight (DW), respectively, 2.23-, 1.75-, and 2.69-fold greater than those in G. lucidum 5.0026. The squalene and lanosterol contents increased 2.35- and 1.75-fold, respectively, in the fruiting body of the mated sqs-vgb strain compared with those in the G. lucidum 5.0026. In addition, the maximum expression levels of the sqs and lanosterol synthase gene (ls) were increased 3.23- and 2.13-fold, respectively, in the mated sqs-vgb strain. In summary, we developed a new G. lucidum strain with higher contents of individual GAs in the fruiting body by integrating genetic engineering and mono-mono crossing.

Protoplast Isolation, Culture, and Regeneration in Common and Tartary Buckwheat.

Techniques based on the use of plant protoplasts are a convenient model for better understanding and observing developmental changes in the cells. The establishment of research tools based on protoplasts consists of many steps needed for optimization. Here, we describe the culture of morphogenic callus (MC)- and hypocotyl-derived protoplasts of common (Fagopyrum esculentum Moench) and Tartary (F. tataricum (L.) Gaertn.) buckwheat. Protoplasts embedding in agarose matrix and application of plant hormones, including phytosulfokine (PSK), enable the development of protoplast cultures and plant regeneration.

First Report on Mesophyll Protoplast Isolation and Regeneration System for the Duboisia Species.

The Duboisia species, a group of plants native to Australia, have been historically valued for their pharmacological properties and have played a significant role in traditional medicine and pharmaceutical research. Persistent efforts are underway to enhance the efficacy of the active ingredient scopolamine, employing both conventional breeding methods and advanced biotechnology tools. The primary objective of this research was to establish a highly efficient method for isolating mesophyll protoplasts and facilitating their regeneration, thereby laying a robust foundation for the application of various advanced plant biotechnology tools in the pursuit of genetic enhancement. The mesophyll protoplast isolation process was developed for hybrid D. myoporoides × D. hopwoodii with careful optimisation of the following parameters: leaf strip size; incubation conditions; physical treatment; and enzyme concentration. The optimal parameters were combined in each individual step; the best enzyme concentration was determined to be 2% (w/v) cellulysin and 0.5% (w/v) macerase. Protoplast yield was found to be greatly affected by the enzyme concentrations. The isolated protoplasts were cultured at a density of 0.5 × 105 to best sustain the highest cell division (33.2%) and a microcalli induction frequency of 17.9%. After 40 days of culture in a modified KM8P medium at 25 °C in darkness, visible microcalli were transferred to a solidified Murashige and Skoog (MS) medium with 1 mg L-1 2,4-dichlorophenoxyacetic acid (2,4-D) for callus induction under a 16 h photoperiod. After 30 days of culture, compact organogenic calli were transferred into a solid MS medium with 6-benzylaminopurine (BA) alone or thidiazuron (TDZ) alone or in combination with BA or naphthalene acetic acid (NAA) for shoot regeneration. The maximum shoot regeneration frequency (63.3%) was observed in the medium with 1.5 mg L-1 TDZ alone. For the first time, a reliable protoplast isolation and regeneration system from mesophyll cells was established for Duboisia with high protoplast viability, successful microcalli formation, and intact plant regeneration. This innovation will significantly contribute towards the genetic enhancement of the Duboisia species.

Establishing Gene Expression and Knockout Methods in Esteya vermicola CBS115803.

Pine wilt disease, which is caused by the nematode Bursaphelenchus xylophilus, is one of the most destructive forest diseases worldwide. Esteya vermicola, a nematophagous fungus, has emerged as a promising biological control agent. However, the limited availability of gene function analysis techniques hinders further genetic modification of this fungus. In this study, we employed a combination of enzymes (driselase, snailase, and cellulase) to enzymatically degrade the cell wall of the fungus, resulting in a high yield of protoplasts. Furthermore, by utilizing 0.6M sucrose as an osmotic pressure stabilizer, we achieved a significant protoplast regeneration rate of approximately 31%. Subsequently, we employed the polyethylene glycol-mediated protoplast transformation method to successfully establish a genetic transformation technique for E. vermicola CBS115803. Additionally, through our investigation, we identified the Olic promoter from Aspergillus nidulans, which effectively enhanced the expression of the DsRed gene encoding a red fluorescent protein in E. vermicola CBS115803. Moreover, we successfully implemented a split-marker strategy to delete the EvIPMD gene in E. vermicola CBS115803. In summary, our findings present valuable experimental methodologies for gene function analysis in E. vermicola CBS115803.

Simultaneous editing of two DMR6 genes in grapevine results in reduced susceptibility to downy mildew.

The reduction of pesticide treatments is of paramount importance for the sustainability of viticulture, and it can be achieved through a combination of strategies, including the cultivation of vines (Vitis vinifera) that are resistant or tolerant to diseases such as downy mildew (DM). In many crops, the knock-out of Downy Mildew Resistant 6 (DMR6) proved successful in controlling DM-resistance, but the effect of mutations in DMR6 genes is not yet known in grapevine. Today, gene editing serves crop improvement with small and specific mutations while maintaining the genetic background of commercially important clones. Moreover, recent technological advances allowed to produce non-transgenic grapevine clones by regeneration of protoplasts edited with the CRISPR/Cas9 ribonucleoprotein. This approach may revolutionize the production of new grapevine varieties and clones, but it requires knowledge about the targets and the impact of editing on plant phenotype and fitness in different cultivars. In this work we generated single and double knock-out mutants by editing DMR6 susceptibility (S) genes using CRISPR/Cas9, and showed that only the combined mutations in VviDMR6-1 and VviDMR6-2 are effective in reducing susceptibility to DM in two table-grape cultivars by increasing the levels of endogenous salicylic acid. Therefore, editing both genes may be necessary for effective DM control in real-world agricultural settings, which could potentially lead to unwanted phenotypes. Additional research, including trials conducted in experimental vineyards, is required to gain a deeper understanding of DMR6-based resistance.

Development of lead (Pb) tolerant strain by protoplast technology and their remediation.

The lead is poisonous metal and because of its chemical nature it acts as an environmental contaminant through the water or soil and it becomes toxic to humans. The toxicity of Pb occurs as a change in the conformation of nucleic acid and protein, inhibition of enzyme activity, disruption of membrane function and oxidative phosphorylation. For protoplast preparation, the removal of the cell wall and protoplast formation obtained by specific lytic enzyme. In cytoplasmic membrane, the envelope of bacteria consists of overlying cell wall. From hypertonic environment, the complete cell wall removal occurs due to which it maintains the osmotic integrity of the cell and produces the protoplast. In current work, protoplasts were produced by specific lytic enzyme (lysozyme and macerozyme), chemo fused (with the help of Polyethylene Glycol) and regenerated from strains Staphylococcus sp. and Bacillus sp. The fused protoplast was spherical in shape observed under microscopy. Colonies were screened on specific medium supplemented with Pb (Concentration at the rate of 1.5mM). One resistant colony (MICBT-1) was selected and further examined and applied for the transformation of Pb in the broth medium. The strain removed 98% of Pb at 1mM concentration. Next, sucrose containing medium was best which gives maximum protoplast regeneration. From various organisms, fusion technique has been used to combine the genes to create the strains having desired properties. This is a significant technique for engineering of bacterial strains for advantageous applied properties. Further MICBT-1 applied in artificially contaminated soil and removed maximally in exchangeable fraction (remains up to 0.05 mM). An efficient bioremediating agent for lead transformation from soil and water is expected to ease the ever-increasing problem. Further, it is needful to obtain new strain with the help of protoplast technology which can reduce the pollutant. This lead tolerant strain can be applied for bioremediation purposes in the Pb contaminated soil and water environment.

Improving the regeneration rate of deep lethal mutant protoplasts by fusion to promote efficient L-lysine fermentation

BackgroundL-lysine is widely used for feed and special diet products. The transformation of fermentation strains plays a decisive role in the development of these industries. Based on the mutation breeding theory and metabolic engineering methods, this study aimed to improve the regeneration rate of high-lethality protoplasts by combining multiple mutagenesis and homologous cell fusion techniques to efficiently concentrate multiple dominant mutations and optimize the L-lysine production strain Escherichia coli QDW.ResultsIn order to obtain the best protoplasts, the optimal enzymolysis time was selected as 4 h. The optimal lysozyme concentration was estimated at 0.8 mg/mL, because the protoplast formation rate and regeneration rate reached 90% and 30%, respectively, and their product reached the maximum. In this study, it was necessary that UV mutagenesis be excessive to obtain an expanded mutation library. For high lethality protoplasts, under the premise of minimal influence on its recovery, the optimal time for UV mutagenesis of protoplasts was 7 min, and the optimal time for thermal inactivation of protoplasts at 85 ℃ was 30 min. After homologous fusion, four fusion strains of E. coli were obtained, and their stability was analyzed by flow cytometry. The L-lysine yield of QDW-UH3 increased by 7.2% compared with that of QDW in a fermentation experiment, which promoted the expression of key enzymes in L-lysine synthesis, indicating that the combination of ultraviolet mutagenic breeding and protoplast fusion technology improved the acid-production level of the fusion strain.ConclusionThis method provides a novel approach for the targeted construction of microbial cell factories.

Evaluation and Improvement of Protocols for Ganoderma boninense Protoplast Isolation and Regeneration

Ganoderma boninense is the causal agent of basal stem rot (BSR) disease of oil palm. The BSR disease reduces oil palm yield by up to 80% of the average oil yield. Attempts to control the disease caused by this fungus in the field showed varying levels of success and cases of infection increased from year to year. Hence, the development of new efficient methods to control the spread of this fungus should be commenced promptly. To ensure a better strategy is created, more thorough research on the method deploy by this fungus to infect the host at the molecular level need to be carried out first. However, the major limitation in endeavoring into the functional analysis of virulence genes related to the pathogenicity of this fungus was hampered by the unavailability of established methods for protoplast isolation with a high regeneration rate to be used in the genetic manipulation analysis. Thus, in this paper, we report an efficient protocol for protoplast isolation and regeneration in G. boninense and successfully used the isolated protoplasts in PEG-mediated transformation analysis. A large quantity of protoplast was obtained using the protocol that utilizes the following parameters: 3 to 4-day-old mycelia, treated with 1% lysing enzyme and 0.02% Driselase, incubated at 30 °C in an osmotic medium containing 0.6 M mannitol at pH 5.8 for 2 h. The highest protoplast yield was in the range of 8.95 × 109 to 3.12 × 1010 cells/mL per 5 g of mycelia used. The regeneration rate ranged from 9.03% to 22.55%, depending on the regeneration media used. By using 5 µg of vector to transform into 1.0 × 107 protoplast/mL, around 3 – 10 mitotically stable putative transformants were successfully obtained and verified via PCR. This protocol will find useful applications in genetic studies to enhance insight into this poorly characterized and understood phytopathogen.