Regeneration Of Osteochondral Defects Research Articles

3D bio scaffold support osteogenic differentiation of mesenchymal stem cells.

The regeneration of osteochondral lesions by tissue engineering techniques is challenging due to the lack of physicochemical characteristics and dual-lineage (osteogenesis and chondrogenesis). A scaffold with better mechanical properties and dual lineage capability is required for the regeneration of osteochondral defects. In this study, a hydrogel prepared from decellularized human umbilical cord tissue was developed and evaluated for osteochondral regeneration. Mesenchymal stem cells (MSCs) isolated from the umbilical cord were seeded with hydrogel for 28 days, and cell-hydrogel composites were cultured in basal and osteogenic media. Alizarin red staining, quantitative polymerase chain reaction, and immunofluorescent staining were used to confirm that the hydrogel was biocompatible and capable of inducing osteogenic differentiation in umbilical cord-derived MSCs. The findings demonstrate that human MSCs differentiated into an osteogenic lineage following 28 days of cultivation in basal and osteoinductive media. The expression was higher in the cell-hydrogel composites cultured in osteoinductive media, as evidenced by increased levels of messenger RNA and protein expression of osteogenic markers as compared to basal media cultured cell-hydrogel composites. Additionally, calcium deposits were also observed, which provide additional evidence of osteogenic differentiation. The findings demonstrate that the hydrogel is biocompatible with MSCs and possesses osteoinductive capability in vitro. It may be potentially useful for osteochondral regeneration.

Photo-crosslinked integrated triphasic scaffolds with gradient composition and strength for osteochondral regeneration.

Owing to the avascular and aneural nature of cartilage tissue and the complex, multilayered structure of osteochondral units, the repair of osteochondral defects poses significant challenges. Traditional monophasic scaffolds have difficulty meeting the repair requirements of both cartilage and bone tissues, whereas multiphasic scaffolds face the issue of interfacial integration. In this study, a triphasic methylpropenylated gelatin (GELMA) hydrogel scaffold was employed to repair osteochondral defects, in which three layers of hydrogel were covalently bonded through a sequential curing process. The upper layer of the scaffold was covalently bonded with chondroitin sulfate, promoting chondrogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). The middle and lower layers of the hydrogel introduced a gradient content of hydroxyapatite, forming a scaffold with gradient mechanical strength and effectively enhancing its angiogenic and osteogenic induction capabilities. Finally, the triphasic integrated scaffold cartilage and bone repair performance was evaluated using a rabbit knee joint defect model. The results demonstrated that the scaffold facilitated accelerated regeneration of osteochondral defects, thus providing a novel strategy for the treatment of osteochondral defects.

A methodological approach towards the bio-inspired design of novel scaffolds for tissue engineering

The design of scaffolds for multi-tissue regeneration is very complex in terms of material and structure, as a direct consequence of hierarchical and organizational features. TRIZ represents the Russian acronym for the “Theory of Inventive Problem Solving” (TIPS). TRIZ is able to identify and codify such principles, using them to make the creative process more predictable. It is a methodology for the identification of the system conflicts and contradictions in order to solve the inventive problems. Its multidisciplinary features and the general approach to product design can make TRIZ as an intriguing starting point for the biomimetic approach in a systematic and organized way. Biomimetics aims at a complete integration between nature and technology. In this scenario, BioTRIZ shares the contradiction resolution method of the Altshuller’s theory, representing a systematic biomimetic approach towards the product design. In the current study, BioTRIZ was considered to systematize the process of bio-inspired design of 3D optimized scaffolds for the regeneration of complex tissue defects. A device for the regeneration of osteochondral tissue defects was considered as a case study. The technical solutions involved the design of a two-compartment, hybrid and functionally graded scaffold.

Therapeutic potential of mesenchymal stem cells from human iPSC-derived teratomas for osteochondral defect regeneration.

Human induced pluripotent stem cells (iPSCs) hold great promise for personalized medicine, as they can be differentiated into specific cell types, especially mesenchymal stem cells (MSCs). Therefore, our study sought to assess the feasibility of deriving MSCs from teratomas generated from human iPSCs. Teratomas serve as a model to mimic multilineage human development, thus enriching specific somatic progenitors and stem cells. Here, we discovered a small, condensed mass of MSCs within iPSC-generated teratomas. Afterward, we successfully isolated MSCs from this condensed mass, which was a byproduct of teratoma development. To evaluate the characteristics and cell behaviors of iPSC-derived MSCs (iPSC-MSCs), we conducted comprehensive assessments using qPCR, immunophenotype analysis, and cell proliferation-related assays. Remarkably, iPSC-MSCs exhibited an immunophenotype resembling that of conventional MSCs, and they displayed robust proliferative capabilities, similar to those of higher pluripotent stem cell-derived MSCs. Furthermore, iPSC-MSCs demonstrated the ability to differentiate into multiple lineages in vitro. Finally, we evaluated the therapeutic potential of iPSC-MSCs using an osteochondral defect model. Our findings demonstrated that teratomas are a promising source for the isolation of condensed MSCs. More importantly, our results suggest that iPSC-MSCs derived from teratomas possess the capacity for tissue regeneration, highlighting their promise for future therapeutic applications.

Tetracalcium Phosphate Biocement Hardened with a Mixture of Phytic Acid–Phytase in the Healing Process of Osteochondral Defects in Sheep

Hyaline articular cartilage has unique physiological, biological, and biomechanical properties with very limited self-healing ability, which makes the process of cartilage regeneration extremely difficult. Therefore, research is currently focused on finding new and potentially better treatment options. The main objective of this in vivo study was to evaluate a novel biocement CX consisting of tetracalcium phosphate–monetit biocement hardened with a phytic acid–phytase mixture for the regeneration of osteochondral defects in sheep. The results were compared with tetracalcium phosphate–monetit biocement with classic fast-setting cement systems and untreated defects. After 6 months, the animals were sacrificed, and the samples were evaluated using macroscopic and histologic methods as well as X-ray, CT, and MR-imaging techniques. In contrast to the formation of fibrous or fibrocartilaginous tissue on the untreated side, treatment with biocements resulted in the formation of tissue with a dominant hyaline cartilage structure, although fine fibres were present (p < 0.001). There were no signs of pathomorphological changes or inflammation. Continuous formation of subchondral bone and hyaline cartilage layers was present even though residual biocement was observed in the trabecular bone. We consider biocement CX to be highly biocompatible and suitable for the treatment of osteochondral defects.

Atelocollagen Scaffold Enhances Cartilage Regeneration in Osteochondral Defects: A Study in Rabbits.

To enhance articular cartilage healing, microfractures (Mfx) and bone marrow aspirate concentrate (BMAC) are commonly used, and some form of scaffold is often used together to increase its efficacy. Herein, we compared the efficacy of atelocollagen scaffold to that of collagen scaffold when used with Mfx or BMAC on osteochondral defect of animal. This experiment was designed in two stages, and therapeutic effects of Mfx and BMAC were respectively evaluated when used with atelocollagen or collagen scaffold. Femoral condyle defects were artificially created in male New Zealand White rabbits, and in each stage, 12 rabbits were randomly allocated into three treatment groups: test group with additional atelocollagen scaffold, the positive control group with collagen scaffold, and the negative control group. Then, for 12weeks, macroscopic and histological evaluations were performed. At 12weeks, defects in the test group were fully regenerated with normal cartilage-like tissue, and were well integrated with the surrounding cartilage at both stages experiment, whereas defects in the control groups were not fully filled with regenerated tissue, and the tissue appeared as fibrous tissue. Histologically, the regenerated tissue in the test group showed a statistically significant improvement compared to the positive and negative control groups, achieving a similar structure as normal articular cartilage. The results showed that implantation of the atelocollagen scaffold enhanced cartilage regeneration following osteochondral defects in rabbits. This suggests that the atelocollagen scaffold can be used with Mfx or BMAC for effective regeneration of osteochondral defects.

3D-printed biomimetic scaffolds with precisely controlled and tunable structures guide cell migration and promote regeneration of osteochondral defect

Untreated osteochondral defects will develop into osteoarthritis, affecting patients’ quality of life. Since articular cartilage and subchondral bone exhibit distinct biological characteristics, repairing osteochondral defects remains a major challenge. Previous studies have tried to fabricate multilayer scaffolds with traditional methods or 3D printing technology. However, the efficacy is unsatisfactory because of poor control over internal structures or a lack of integrity between adjacent layers, severely compromising repair outcomes. Therefore, there is a need for a biomimetic scaffold that can simultaneously boost osteochondral defect regeneration in both structure and function. Herein, an integrated bilayer scaffold with precisely controlled structures is successfully 3D-printed in one step via digital light processing (DLP) technology. The upper layer has both ‘lotus- and radial-’ distribution pores, and the bottom layer has ‘lotus-’ pores to guide and facilitate the migration of chondrocytes and bone marrow mesenchymal stem cells, respectively, to the defect area. Tuning pore sizes could modulate the mechanical properties of scaffolds easily. Results show that 3D-printed porous structures allow significantly more cells to infiltrate into the area of ‘lotus- and radial-’ distribution pores during cell migration assay, subcutaneous implantation, and in situ transplantation, which are essential for osteochondral repair. Transplantation of this 3D-printed bilayer scaffold exhibits a promising osteochondral repair effect in rabbits. Incorporation of Kartogenin into the upper layer of scaffolds further induces better cartilage formation. Combining small molecules/drugs and precisely size-controlled and layer-specific porous structure via DLP technology, this 3D-printed bilayer scaffold is expected to be a potential strategy for osteochondral regeneration.

Gelatin methacryloyl hydrogel with and without dental pulp stem cells for TMJ regeneration: An invivo study in rabbits.

In the last decade, tissue-engineering strategies for regenerating the temporomandibular joint (TMJ) have been investigated. This may be a promising strategy for the minimally invasive restoration of joint integrity. To evaluate whether dental pulp stem cells (DPSCs) loaded in a light-occured hydrogel made of gelatin methacryloyl (GelMA) enhance the regeneration of osteochondral defects in the rabbit TMJ. Defects were filled with GelMA alone (control group; n = 4) or filled with GelMA loaded with rabbit DPSCs (experimental group; n = 4), In one group, the TMJ capsule was opened without creating a defect (sham group; n = 2). The following micro-CT parameters were analysed: bone volume to total volume ratio (BV/TV%) and bone mineral density (BMD). Histological evaluation was performed to assess cartilage regeneration features. A semi-quantitative scoring system was also used to evaluate the defects. All groups had no statistical difference regarding the micro-CT parameters. The highest mean healing score was found for the experimental group. After 4 weeks, there were no signs of hydrogel in either group or no signs of inflammation in the adjacent tissues. The tissue formed in the defect was dense fibrous connective tissue. Adding DPSCs to GelMA did not provide a regenerative enhancement in TMJ osteochondral defects. This resulted in similar micro-CT parameters after 4 weeks of healing, with improved signs of subchondral bone regeneration but no cartilage regeneration.

Small-Molecule Loaded Biomimetic Biphasic Scaffold for Osteochondral Regeneration: An In Vitro and In Vivo Study.

Osteoarthritis is a prevalent musculoskeletal disorder in the elderly, which leads to high rates of morbidity. Mesenchymal stem cells (MSCs) are a promising approach to promote tissue regeneration in the absence of effective long-term treatments. Small molecules are relatively inexpensive and can selectively alter stem cell behavior during their differentiation, making them an attractive option for clinical applications. In this study, we developed an extracellular matrix (ECM)-based biphasic scaffold (BPS) loaded with two small-molecule drugs, kartogenin (KGN) and metformin (MET). This cell-free biomimetic biphasic scaffold consists of a bone (gelatin/hydroxyapatite scaffold embedded with metformin [GHSM]) and cartilage (nano-gelatin fiber embedded with kartogenin [NGFK]) layer designed to stimulate osteochondral regeneration. Extracellular matrix (ECM)-based biomimetic scaffolds can promote native cell recruitment, infiltration, and differentiation even in the absence of additional growth factors. The biphasic scaffold (BPS) showed excellent biocompatibility in vitro, with mesenchymal stem cells (MSCs) adhering, proliferating, and differentiated on the biomimetic biphasic scaffolds (GHSM and NGFK layers). The biphasic scaffolds upregulated both osteogenic and chondrogenic gene expression, sulfated glycosaminoglycan (sGAG), osteo- and chondrogenic biomarker, and relative mRNA gene expression. In an in vivo rat model, histo-morphological staining showed effective regeneration of osteochondral defects. This novel BPS has the potential to enhance both subchondral bone repair and cartilage regeneration, demonstrating excellent effects on cell homing and the recruitment of endogenous stem cells.

Marine-Inspired Approaches as a Smart Tool to Face Osteochondral Regeneration.

The degeneration of osteochondral tissue represents one of the major causes of disability in modern society and it is expected to fuel the demand for new solutions to repair and regenerate the damaged articular joints. In particular, osteoarthritis (OA) is the most common complication in articular diseases and a leading cause of chronic disability affecting a steady increasing number of people. The regeneration of osteochondral (OC) defects is one of the most challenging tasks in orthopedics since this anatomical region is composed of different tissues, characterized by antithetic features and functionalities, in tight connection to work together as a joint. The altered structural and mechanical joint environment impairs the natural tissue metabolism, thus making OC regeneration even more challenging. In this scenario, marine-derived ingredients elicit ever-increased interest for biomedical applications as a result of their outstanding mechanical and multiple biologic properties. The review highlights the possibility to exploit such unique features using a combination of bio-inspired synthesis process and 3D manufacturing technologies, relevant to generate compositionally and structurally graded hybrid constructs reproducing the smart architecture and biomechanical functions of natural OC regions.

A bioscaffold of decellularized whole osteochondral sheet improves proliferation and differentiation of loaded mesenchymal stem cells in a rabbit model.

As a Natural decellularized extracellular matrix, osteochondral tissue is the best scaffold for the restoration of osteoarthritis defects. Bioscaffolds have the most similarly innate properties like biomechanical properties and the preserved connection of the bone-to-cartilage border. Although, their compacity and low porosity particularly, are proven to be difficulties of decellularization and cell penetration. This study aims to develop a new bioscaffold of decellularized osteochondral tissue (DOT) that is recellularized by bone marrow-derived mesenchymal stem cells (BM-MSCs), as a biphasic allograft, which preserved the interface between the cartilage section and subchondral bone of the joint. Whole osteochondral tissues of rabbit knee joints were sheeted in cartilaginous parts in 200-250µm sections while connected to the subchondral bone and then fully decellularized. The BM-MSCs were seeded on the scaffolds in vitro; some constructs were subcutaneously implanted into the back of the rabbit. The cell penetration, differentiation to bone and cartilage, viability, and cell proliferation in vitro and in vivo were evaluated by qPCR, histological staining, MTT assay, and immunohistochemistry. DNA content analysis and SEM assessments confirmed the decellularization of the bioscaffold. Then, histological and SEM evaluations indicated that the cells could successfully penetrate the bone and cartilage lacunas in implanted grafts. MTT assay confirmed cell proliferation. Prominently, gene expression analysis showed that seeded cells differentiated into osteoblasts and chondrocytes in both bone and cartilage sections. More importantly, seeded cells on the bioscaffold started ECM secretion. Our results indicate that cartilage-to-bone border integrity was largely preserved. Additionally, ECM-sheeted DOT could be employed as a useful scaffold for promoting the regeneration of osteochondral defects.

A One-Stone-Two-Birds Strategy for Osteochondral Regeneration Based on a 3D Printable Biomimetic Scaffold with Kartogenin Biochemical Stimuli Gradient.

Osteochondral defect (OCD) regeneration remains challenging because of the hierarchy of the native tissue including both the articular cartilage and the subchondral bone. Constructing an osteochondral scaffold with biomimetic composition, structure, and biological functionality is the key to achieve its high-quality repair. In the present study, an injectable and 3D printable bilayered osteochondral hydrogel based on compositional gradient of methacrylated sodium alginate, gelatin methacryloyl, and β-tricalcium phosphate (β-TCP), as well as the biochemical gradient of kartogenin (KGN) in the two well-integrated zones of chondral layer hydrogel (CLH) and osseous layer hydrogel (OLH) is developed. In vitro and subcutaneous in vivo evaluations reveal that apart from the chondrogenesis of the embedded bone mesenchymal stem cells induced by CLH with a high concentration of KGN, a low concentration of KGN with β-TCP in the OLH synergistically achieves superior osteogenic differentiation by endochondral ossification, instead of the intramembranous ossification using OLH with only β-TCP. The biomimetic construct leveraging KGN as the only biochemical inducer can facilitate cartilage and subchondral bone restoration in the in vivo osteochondral defect. This one-stone-two-birds strategy opens up a new facile approach for OCD regeneration by exploiting the biological functions of the bioactive drug molecule KGN.

Regeneration of Osteochondral Defects by Combined Delivery of Synovium-Derived Mesenchymal Stem Cells, TGF-β1 and BMP-4 in Heparin-Conjugated Fibrin Hydrogel.

The regeneration of cartilage and osteochondral defects remains one of the most challenging clinical problems in orthopedic surgery. Currently, tissue-engineering techniques based on the delivery of appropriate growth factors and mesenchymal stem cells (MSCs) in hydrogel scaffolds are considered as the most promising therapeutic strategy for osteochondral defects regeneration. In this study, we fabricated a heparin-conjugated fibrin (HCF) hydrogel with synovium-derived mesenchymal stem cells (SDMSCs), transforming growth factor-β1 (TGF-β1) and bone morphogenetic protein-4 (BMP-4) to repair osteochondral defects in a rabbit model. An in vitro study showed that HCF hydrogel exhibited good biocompatibility, a slow degradation rate and sustained release of TGF-β1 and BMP-4 over 4 weeks. Macroscopic and histological evaluations revealed that implantation of HCF hydrogel with SDMSCs, TGF-β1 and BMP-4 significantly enhanced the regeneration of hyaline cartilage and the subchondral bone plate in osteochondral defects within 12 weeks compared to hydrogels with SDMSCs or growth factors alone. Thus, these data suggest that combined delivery of SDMSCs with TGF-β1 and BMP-4 in HCF hydrogel may synergistically enhance the therapeutic efficacy of osteochondral defect repair of the knee joints.

Arthrozheal®, a Bioactive Fibrin Scaffold for Joint Cartilage, Tendon and Soft Tissue Lesions. Latest Results and Application Perspectives.

Treatment of articular cartilage, tendon and soft tissue damage remains a challenge for the practicing orthopaedic surgeon. Due to the multifactorial aetiology of these lesions, there is a narrow therapeutic window within which they can be treated successfully, thus preventing progression to other musculoskeletal tissues. Recently, a new material that combines platelet-rich fibrin with collagen and is applied as a gel scaffold (ArthroZheal®, Vivostat A/S, Allerød, Denmark) has been shown to provide unique results in these patients. We arthroscopically treated 210 patients (114 knees, 32 hips, 52 shoulders, 12 ankle joints) with ArthroZheal®. The basic idea was to adjust treatment to the individual patient and to repair related and/or contributing problems before or along with treatment of chondral/tendon/ligament injuries. Arthroscopy was our preferred surgical method; the goal was to restore and preserve function, alleviate pain and minimise progression to osteoarthritis. We excluded cases of inflammatory arthropathy, unstable or malaligned joint, "kissing lesions" (bipolar), infection, obesity, massive rotator cuff rupture and multiligament instability. Our results were more than promising. We observed improved mobility in 93%, reduced pain in 95% at 3 months and further improvement at 6 months, with near-normal ROM (97% ) and pain-free status (98%). The MRI at 12 months post application showed cartilage restoration/reformation in 94% of patients, improved cartilage quality (84% )-by 2nd-look arthroscopic confirmationand normal tendon or ligament reconstruction (without stitching of the affected area)(95%). We were concerned about bone marrow oedema and rehab compliance among elderly patients. For successful regeneration of tissue lesions and osteochondral defects, natural gel bioscaffolds, combined with platelet rich fibrin (PRF) with chondroinductive and osteoinductive growth factor stimulators (ArthroZheal®) are required. There is no "gold standard" in the treatment of cartilage defect/tissue lesions or preferred treatment option. Many algorithms are used, which mostly rely on the surface area of the defect/site of lesion and on surgeon experience. An important issue is that rehabilitation depends on the treatment mode used and on the defect/lesion characteristics (classification and qualification). While a return to functional work and sports is possible with all procedures, different lengths of time are needed.

A Slotted Decellularized Osteochondral Scaffold With Layer-Specific Release of Stem Cell Differentiation Stimulators Enhances Cartilage and Bone Regeneration in Osteochondral Defects in a Rabbit Model

Background: Owing to the disappointing regenerative ability of osteochondral tissue, without treatment an osteochondral defect would progress to osteoarthritis. This situation motivates the need for new strategies to enhance the regeneration of osteochondral defects. Purpose: To develop a tissue-engineering scaffold by tethering bone morphogenetic protein 2 (BMP2) and transforming growth factor beta 3 (TGFβ3) in a layer-specific manner on a slotted decellularized osteochondral matrix (SDOM) and to evaluate the efficacy of this scaffold for osteochondral regeneration. Study Design: Controlled laboratory study. Methods: Normal osteochondral tissue from the rabbit patellofemoral groove was sectioned into a slot shape and decellularized for fabricating an SDOM. The collagen-binding domain (CBD) was fused into the N-terminus of BMP2 or TGFβ3 to synthesize 2 recombinant growth factors (GFs) (CBD-BMP2 or CBD-TGFβ3), which were tethered to the bone layer and cartilage layer, respectively, of the SDOM to prepare a tissue-engineering scaffold (namely, CBD-GFs/SDOM). After examining the influence of the CBD-GFs/SDOM on the viability and layer-specific differentiation of bone marrow mesenchymal stem cells in vitro, we determined the regeneration potential of the CBD-GFs/SDOM on osteochondral regeneration in a rabbit model. A total of 72 New Zealand White rabbits with a cylindrical osteochondral defect in the patellofemoral groove were randomly assigned to 3 groups: defect only (control [CTL] group), defect patched with an SDOM (SDOM group), and defect patched with the CBD-GFs/SDOM (CBD-GFs/SDOM group). At 6 or 12 weeks postoperatively, the rabbits were euthanized to harvest the knee joint, which was then evaluated via gross observation, micro–computed tomography, histological staining, and mechanical testing. Results: In vitro, the CBD-GFs/SDOM was noncytotoxic, showed high biomimetics with normal osteochondral tissue, was suitable for cell adhesion and growth, and had good layer-specific ability in inducing stem cell differentiation. Macroscopic images showed that the CBD-GFs/SDOM group had significantly better osteochondral regeneration than the CTL and SDOM groups had. Micro–computed tomography demonstrated that much more bony tissue was formed at the defect sites in the CBD-GFs/SDOM group compared with the defect sites in the CTL or SDOM group. Histological analysis showed that the CBD-GFs/SDOM group had a significant enhancement in osteochondral regeneration at 6 and 12 weeks postoperatively in comparison with the CTL or SDOM group. At 12 weeks postoperatively, the mechanical properties of reparative tissue were significantly better in the CBD-GFs/SDOM group than in the other groups. Conclusion: The CBD-GFs/SDOM is a promising scaffold for osteochondral regeneration. Clinical Relevance: The findings of this study indicated that the CBD-GFs/SDOM is an excellent candidate for reconstructing osteochondral defects, which may be translated for clinical use in the future.

The Emerging Use of ASC/Scaffold Composites for the Regeneration of Osteochondral Defects.

Articular cartilage is composed of chondrocytes surrounded by a porous permeable extracellular matrix. It has a limited spontaneous healing capability post-injury which, if left untreated, can result in severe osteochondral disease. Currently, osteochondral (OC) defects are treated by bone marrow stimulation, artificial joint replacement, or transplantation of bone, cartilage, and periosteum, while autologous osteochondral transplantation is also an option; it carries the risk of donor site damage and is limited only to the treatment of small defects. Allografts may be used for larger defects; however, they have the potential to elicit an immune response. A possible alternative solution to treat osteochondral diseases involves the use of stromal/stem cells. Human adipose-derived stromal/stem cells (ASCs) can differentiate into cartilage and bone cells. The ASC can be combined with both natural and synthetic scaffolds to support cell delivery, growth, proliferation, migration, and differentiation. Combinations of both types of scaffolds along with ASCs and/or growth factors have shown promising results for the treatment of OC defects based on in vitro and in vivo experiments. Indeed, these findings have translated to several active clinical trials testing the use of ASC-scaffold composites on human subjects. The current review critically examines the literature describing ASC-scaffold composites as a potential alternative to conventional therapies for OC tissue regeneration.

Silk-based hydrogel incorporated with metal-organic framework nanozymes for enhanced osteochondral regeneration.

Osteochondral defects (OCD) cannot be efficiently repaired due to the unique physical architecture and the pathological microenvironment including enhanced oxidative stress and inflammation. Conventional strategies, such as the control of implant microstructure or the introduction of growth factors, have limited functions failing to manage these complex environments. Here we developed a multifunctional silk-based hydrogel incorporated with metal-organic framework nanozymes (CuTA@SF) to provide a suitable microenvironment for enhanced OCD regeneration. The incorporation of CuTA nanozymes endowed the SF hydrogel with a uniform microstructure and elevated hydrophilicity. In vitro cultivation of mesenchymal stem cells (MSCs) and chondrocytes showed that CuTA@SF hydrogel accelerated cell proliferation and enhanced cell viability, as well as had antioxidant and antibacterial properties. Under the inflammatory environment with the stimulation of IL-1β, CuTA@SF hydrogel still possessed the potential to promote MSC osteogenesis and deposition of cartilage-specific extracellular matrix (ECM). The proteomics analysis further confirmed that CuTA@SF hydrogel promoted cell proliferation and ECM synthesis. In the full-thickness OCD model of rabbit, CuTA@SF hydrogel displayed successfully in situ OCD regeneration, as evidenced by micro-CT, histology (HE, S/O, and toluidine blue staining) and immunohistochemistry (Col I and aggrecan immunostaining). Therefore, CuTA@SF hydrogel is a promising biomaterial targeted at the regeneration of OCD.

Hyaluronic acid-based biphasic scaffold with layer-specific induction capacity for osteochondral defect regeneration

The repair of cartilage and subchondral bone defects, especially the former, remains a challenge in clinical practice. An increasing number of studies have shown that the use of biomaterials has great advantages in regulating tissue repair, with lower cost and risk than the use of cytokines or cells. However, great challenges remain because of the marked differences between cartilage and subchondral bone. Here, biphasic osteochondral scaffolds with layer-specific differentiation were designed and developed. Hyaluronic acid (HA) was used as the matrix in the upper and lower layers, and differences in physicochemical properties and biological properties between the two layers were realized by different chemical crosslinking methods. The cartilage regeneration layer exhibited stress relaxation from the HA hydrazone crosslinking dynamics. Additionally, a porous HA hydrogel with dominant elasticity was prepared for subchondral bone repair. Importantly, a 3D-printed scaffold bracket could keep close integration of two layers and provided mechanical support, aiding the long-term tissue regeneration process. The in vitro and in vivo results indicated that the HA-base bilayer scaffold consisting of a dynamic HA layer and a porous HA layer realized the simultaneous integrated regeneration of articular cartilage and subchondral bone. Such scaffolds represent potential new materials for osteochondral regeneration.

Poly-Alanine-ε-Caprolacton-Methacrylate as Scaffold Material with Tuneable Biomechanical Properties for Osteochondral Implants

An aging population and injury-related damage of the bone substance lead to an increasing need of innovative materials for the regeneration of osteochondral defects. Biodegradable polymers form the basis for suitable artificial implants intended for bone replacement or bone augmentation. The great advantage of these structures is the site-specific implant design, which leads to a considerable improvement in patient outcomes and significantly reduced post-operative regeneration times. Thus, biomechanical and biochemical parameters as well as the rate of degradation can be set by the selection of the polymer system and the processing technology. Within this study, we developed a polymer platform based on the amino acid Alanine and ε-Caprolacton for use as raw material for osteochondral implants. The biomechanical and degradation properties of these Poly-(Alanine-co-ε-Caprolacton)-Methacrylate (ACM) copolymers can be adjusted by changing the ratio of the monomers. Fabrication of artificial structures for musculo-skeletal tissue engineering was done by Two-Photon-Polymerization (2PP), which represents an innovative technique for generating defined scaffolds with tailor-made mechanical and structural properties. Here we show the synthesis, physicochemical characterization, as well as first results for structuring ACM using 2PP technology. The data demonstrate the high potential of ACM copolymers as precursors for the fabrication of biomimetic implants for bone-cartilage reconstruction.

Multifunctional polyphenol-based silk hydrogel alleviates oxidative stress and enhances endogenous regeneration of osteochondral defects

In osteochondral defects, oxidative stress caused by elevated levels of reactive oxygen species (ROS) can disrupt the normal endogenous repair process. In this study, a multifunctional hydrogel composed of silk fibroin (SF) and tannic acid (TA), the FDA-approved ingredients, was developed to alleviate oxidative stress and enhance osteochondral regeneration. In this proposed hydrogel, SF first interacts with TA to form a hydrogen-bonded supramolecular structure, which is subsequently enzymatically crosslinked to form a stable hydrogel. Furthermore, TA had multiple phenolic hydroxyl groups that formed interactions with the therapeutic molecule E7 peptide for controlled drug delivery. In vitro investigations showed that SF-TA and SF-TA-E7 hydrogels exhibited a multitude of biological effects including scavenging of ROS, maintaining cell viability, and promoting the proliferation of bone marrow mesenchymal stem cells (BMSCs) against oxidative stress. The proteomic analysis indicated that SF-TA and SF-TA-E7 hydrogels suppressed oxidative stress, which in turn improved cell proliferation in multiple proliferation and apoptosis-related pathways. In rabbit osteochondral defect model, SF-TA and SF-TA-E7 hydrogels promoted enhanced regeneration of both cartilage and subchondral bone as compared to hydrogel without TA incorporation. These findings indicated that the multifunctional SF-TA hydrogel provided a microenvironment suitable for the endogenous regeneration of osteochondral defects.