Refractive Index Measurements Research Articles

Refractive Index and Dispersion Measurement Principle with Polarization Change in Total Internal Reflection

Refractive Index and Dispersion Measurement Principle with Polarization Change in Total Internal Reflection

Proposal for a New Differential High-Sensitivity Refractometer for the Simultaneous Measurement of Two Refractive Indices and Their Differences

The refractive index of a liquid serves as a fundamental parameter reflecting its composition, thereby enabling the determination of component concentrations in various fields such as chemical research, the food industry, and environmental monitoring. Traditional methods for refractive index (RI) measurement rely on light deflection angles at interfaces between the liquid and a material with a known refractive index. In this paper, the authors present a new differential refractometer for the highly sensitive measurement of RI differences between two liquid samples. Using a configuration with two cells equipped with flat parallel plates as measuring elements, the instrument facilitates accurate analysis. Namely, the sensor signals from both the solution and the solvent cuvette are generated simultaneously with one laser pulse, reducing the possible fluctuations in the laser radiation intensity. Our evaluation shows the high sensitivity of RI measurements < 7 × 10−6, so this differential refractometer can be proposed not only as a high-sensitivity sensing tool that can be used for mobile detection of nanoparticles in solution samples but also to determine the level of environmental nano-pollution using water (including rain, snow) samples from various natural as well as industrial sources, thus helping to solve some important environmental problems.

Simultaneous measurement of thickness and group refractive index in birefringent crystals

In order to measure the group refractive index and thickness of birefringent crystals simultaneously, a method based on spectral-domain interferometry is proposed. The optical path of each reflection layer of birefringent crystal is converted into spectral interference fringe of corresponding frequency by the principle of spectral-domain interferometry, and the accurate optical path calculation is realized by fast Fourier transform and Hanning-windowed energy centrobaric method. A two-step measurement method was designed to measure the crystal thickness and group refractive index of ordinary ( o ) and extraordinary ( e ) light synchronously by comparing the changes of the optical path before and after the insertion of the sample. The comparison between experimental and theoretical results of LiNbO3 crystals shows that the accuracy of the thickness measured by this system is better than 1 μm and the relative error of the group refractive index is better than 0.15%. The measurement method is simple to implement and has high precision, which is of practical significance for realizing the rapid and high-precision measurement of optical parameters of birefringent crystals.

Assessment of the Effect of Surface Modification of Metal Oxides on Silver Nanoparticles: Optical Properties and Potential Toxicity.

Silver nanoparticles (AgNPs) have garnered significant interest due to their distinctive properties and potential applications. Traditional fabrication methods for nanoparticles often involve high-energy physical conditions and the use of toxic solvents. Various green synthesis approaches have been developed to circumvent these issues and produce environmentally benign nanoparticles. Our study focuses on the green synthesis of AgNPs using L-ascorbic acid and explores the modification of their properties to enhance antibacterial and anticancer effects. This is achieved by coating the nanoparticles with Zinc oxide (ZnO) and Silica oxide (SiO2), which alters their optical properties in the visible spectrum. The synthesized formulations-AgNPs, zinc oxide-silver nanoparticles (Ag@ZnO), and silica oxide-silver nanoparticles (Ag@SiO2) core/shell nanoparticles-were characterized using a suite of physicochemical techniques, including Transmission Electron Microscopy (TEM), Dynamic Light Scattering (DLS), Zeta potential measurement, UV-Vis spectroscopy, Refractive Index Measurements, and Optical Anisotropy Assessment. TEM imaging revealed particle sizes of 11 nm for AgNPs, 8 nm for Ag@ZnO, and 400 nm for Ag@SiO2. The Zeta potential values for Ag@ZnO and Ag@SiO2 were measured at -17.0 ± 5 mV and -65.0 ± 8 mV, respectively. UV-Vis absorption spectra were recorded for all formulations in the 320 nm to 600 nm wavelength range. The refractive index of AgNPs at 404.7 nm was 1.34572, with slight shifts observed for Ag@ZnO and Ag@SiO2 to 1.34326 and 1.37378, respectively. The cytotoxicity of the nanocomposites against breast cancer cell lines (MCF-7) was assessed using the MTT assay. The results indicated that AgNPs and Ag@ZnO exhibited potent therapeutic effects, with IC50 values of 494.00 µg/mL and 430.00 µg/mL, respectively, compared to 4247.20 µg/mL for Ag@SiO2. Additionally, the antibacterial efficacy of AgNPs was significantly enhanced under visible light irradiation. Ag@ZnO demonstrated substantial antibacterial activity both with and without light exposure, while the Ag@SiO2 nanocomposites significantly reduced the inherent antibacterial activity of silver. Conversely, the Ag@ZnO nanocomposites displayed pronounced antibacterial and anticancer activities. The findings suggest that silver-based nanocomposites, particularly Ag@ZnO, could be practical tools in water treatment and the pharmaceutical industry due to their enhanced therapeutic properties.

Comparative Study of Molecular Interaction in Binary Liquid Mixture at 303.15 K

In this paper, experimental measurement of viscosity, density and refractive index of a pure liquid and their binary mixture of compound m-cresol with methanol, ethanol, butanol, propanol and alcohols were done at a temperature of 303.15 K. The data analysis obtained above gave information about various parameters such as excess molar volume, viscosity deviation, internal pressure, excess free volume, compressibility, excess ultrasonic velocity , intermolecular free length etc. The result is discussed in terms of existence of intermolecular interactions between the components in the mixtures under the study.

Multi-parameter terahertz metamaterial sensors based on single-layer quarter ring patterns

A terahertz metamaterial sensor based on a single-layer quarter ring pattern is proposed to realize the simultaneous measurement of temperature, refractive index, and other parameters through a metasurface consisting of a patterned quarter ring gold layer and a silicon substrate. Field finite element numerical simulations were performed to analyse the transmission and reflection spectra. A two-parameter sensor combined with electric field distribution was realized using multiple peaks, thus revealing the physical mechanisms of the interaction in metamaterial structures. In addition, the effect of each geometrical parameter on the sensor performance is also simultaneously analysed to verify the optimal selection of structural parameters. On this basis, the sensors are theoretically analysed at different incidence and polarization angles, and the results show that the transmittance is not sensitive to the polarization angle. The simulation results show that the transmittance at the resonant frequencies of 0.48 THz, 0.64 THz, 0.79 THz and 1.04 THz are 93.7 %, 79.1 %, 38.4 % and 50.8 %, respectively, and the refractive index sensitivities at the resonant frequencies are 6.84 GHz/RIU, 7.42 GHz/RIU, 8.22 GHz/RIU and 32.11 GHz/RIU, and quality factor Q of 6.76, 9.63, 15.51 and 26.28, respectively. The devices proposed in this study are simple in structure, easy to fabricate, easy to miniaturize and can be integrated for sensitivity, multi-parameter sensors. They can be functionally designed for chemical and biological sensing and other important applications.

Simultaneous measurement of refractive index and temperature using a balloon-type optical fiber sensor

In the food industry, acetic acid is a compound often used as a preservative or additive, but it is also produced during the fermentation of various food products and constitutes a key marker of food safety and quality. Although accurate, sensitive, and selective, the traditional methods for determining acetic acid are also expensive and time-consuming. In this regard, optical fiber sensors have emerged as a possible alternative for the real-time monitoring of small molecules. In this work, we propose an optical fiber sensor for the simultaneous measurement of refractive index (RI) and temperature using a balloon-shaped structure with a single sensing element. The sensor, based on cladding modal interference, was characterized by its response to RI in the range from 1.320 to 1.352 RIU, using acetic acid solutions with concentrations between 0% and 50%(v/v), and by its response to temperature between 23 and 43 °C. A maximum sensitivity of 170.66 nm/RIU was obtained for RI, equivalent to 110.7 pm/%(v/v) in terms of concentration, and a maximum sensitivity of −119.2 pm/°C was obtained for temperature.

The effect of surface roughness on the performance of 3D printed surface plasmon resonance sensors for refractive index measurements

AbstractIn this study, a polymer-based surface plasmon resonance (SPR) sensor for refractive index measurements was designed and manufactured via inkjet 3D printing; then, it was optically characterized. Next, it was investigated how the surface finish of the 3D printed optical waveguide affects the sensor performance, i.e., its sensitivity. More in detail, it was studied how the surface roughness changes with the placement of the 3D printed items on the building platform. To achieve this purpose, a Phase I distribution-free quality monitoring analysis of the selected manufacturing process was implemented for a small pilot production run. The aim was to check the stability of surface roughness versus the placement of the 3D printed parts on the building platform. The 3D printed sensor’s surface roughness was assessed through a profilometry study. In particular, the surface roughness was determined for the core of the optical waveguide used to excite the SPR phenomena. Furthermore, the SPR sensors were optically characterized to find the existing relationship between their sensitivity and the considered quality of surface finish. In particular, by varying the surface roughness of the used waveguide, the light scattering in the waveguide changes, and the SPR sensitivity changes too, similarly to the light-diffusing fibers covered by gold nanofilms where the guided light is scattered through a plurality of voids distributed in the core. The procedure followed to investigate the sensor roughness, and establishing their performance enabled the optimal operative range for their application in practice to be identified. Finally, a better knowledge of the 3D printing manufacturing process has been achieved to improve quality of surface finish.

A Study on the Effect of Dilution on Refractive Index of Acetone

This r study investigates the impact of dilution on the refractive index of acetone-water solutions, aiming to study the relationship between solution concentration and optical properties. The experiment involves preparing a series of acetone-water solutions with varying concentrations and measuring their refractive indices using a spectrometer. The abstract will outline the methodology employed, including the preparation of solutions, experimental setup, and data collection procedures. It will also highlight the use of refractive index measurements in describing the characteristics of solutions and their applicability in physics, chemistry, and materials science. The study's expected findings, including the possibility of departures from ideal behaviour and the relationship between solution concentration and refractive index, will be covered in the abstract. It will also stress how crucial it is to understand how dilution affects refractive index for real-world uses, like those in the food, chemical, and pharmaceutical sectors. A greater understanding of solution chemistry and optical phenomena will result from this research's insightful observations of the optical behaviour of acetone-water solutions. Key Words: optics, spectrometer, refractive index, acetone

Plug-and-Play Fabry-Perot interferometric biosensor with Vernier effect for label-free detection of bovine serum albumin

In this work, we demonstrate a novel plug-and-play integrated optical fiber sensing structure based on femtosecond laser micromachining and Vernier effect for label-free detection of bovine serum albumin (BSA) concentration. A rectangular microgroove is etched in the hollow-core fiber (HCF), and a U-shaped fiber is formed to design an open microcavity Fabry-Perot interferometer (FPI), in which the liquid can flow sufficiently into the microcavity as the sensing medium. Through simulation and experimental testing, it has been proven that the sensor can achieve high sensitivity and precision detection of BSA concentration. The refractive index measurement sensitivity is as high as 12308.97nm/RIU, and the BSA concentration measurement sensitivity is 1.972nm/(mg/ml), with an average absolute percentage error of 2.03%. The performance test shows that the sensor has the advantages of strong stability, good repeatability, high measurement accuracy and fast liquid exchange, it can be used as a new sensing method to achieve real-time, online and fast detection of weakly changing biomass.

Discovery of a hyperalkaline liquid condensed phase: significance toward applications in carbon dioxide sequestration.

Bicarbonate ion-containing solutions such as seawater, natural brines, bovine serum and other mineralizing fluids have been found to contain hyperalkaline droplets of a separate, liquid condensed phase (LCP), that have higher concentrations of bicarbonate ion (HCO3 -) relative to the bulk solution in which they reside. The existence and unique composition of the LCP droplets have been characterized by nanoparticle tracking analysis, nuclear magnetic resonance spectroscopy, fourier transform infrared spectroscopy, dissolved inorganic carbon analysis and refractive index measurements. Carbon dioxide can be brought into solution through an aqueous reaction to form LCP droplets that can then be separated by established industrial membrane processes as a means of concentrating HCO3 -. Reaction of calcium with the LCP droplets results in calcium carbonate precipitation and mineral formation. The LCP phenomenon may bear on native mineralization reactions and has the potential to change fundamental approaches to carbon capture, sequestration and utilization.

A bicarbonate-rich liquid condensed phase in non-saturated solutions in the absence of divalent cations.

Bicarbonate (HCO3 -) and sodium (Na+)-containing solutions contain droplets of a separate, bicarbonate-rich liquid condensed phase (LCP) that have higher concentrations of HCO3 - relative to the bulk solution in which they reside. The existence and composition of the LCP droplets has been investigated by nanoparticle tracking analysis, nuclear magnetic resonance spectroscopy, refractive index measurements and X-ray pair distribution function analysis. The bicarbonate-rich LCP species is a previously unaccounted-for, ionic phenomenon which occurs even in solutions with solely monovalent cations. Its existence requires re-evaluation of models used to describe and model aqueous solution physicochemistry, especially those used to describe and model carbonate mineral formation.

Ultrasensitive RI and temperature sensor based on cascaded microfiber MZIs with Vernier effect

A sensitivity amplified optical fiber sensor based on Vernier effect by cascaded microfiber Mach-Zehnder interferometers (MZIs) is proposed and demonstrated for the simultaneous measurement of refractive index (RI) and temperature. The traditional single mode fiber is tapered into micrometer near the dispersion turning point to constitute MZI, and then cascaded to generate Vernier effect for the sensitivity enhancement. A novel phenomenon that the envelope of Vernier effect shifted in opposite directions decided by the free spectral ranges of the sensing and reference arms is clarified and demonstrated for the first time. Experimental results show that the RI sensitivity can be improved from 944 nm/RIU of single MZI to 18504 nm/RIU of Vernier effect, while the temperature sensitivity can be improved from −0.53 nm/℃ of single MZI to 9.49 nm/℃ of Vernier effect. Moreover, the proposed sensor with the merits of low hysteresis effect, good repeatability, high stability and good reliability, making it of great potential for biochemical trace detections without temperature-induced cross-sensitivity.

Estimation of the mass density of biological matter from refractive index measurements

The quantification of physical properties of biological matter gives rise to novel ways of understanding functional mechanisms. One of the basic biophysical properties is the mass density (MD). It affects the dynamics in sub-cellular compartments and plays a major role in defining the opto-acoustical properties of cells and tissues. As such, the MD can be connected to the refractive index (RI) via the well known Lorentz-Lorenz relation, which takes into account the polarizability of matter. However, computing the MD based on RI measurements poses a challenge, as it requires detailed knowledge of the biochemical composition of the sample. Here we propose a methodology on how to account for assumptions about the biochemical composition of the sample and respective RI measurements. To this aim, we employ the Biot mixing rule of RIs alongside the assumption of volume additivity to find an approximate relation of MD and RI. We use Monte-Carlo simulations and Gaussian propagation of uncertainty to obtain approximate analytical solutions for the respective uncertainties of MD and RI. We validate this approach by applying it to a set of well-characterized complex mixtures given by bovine milk and intralipid emulsion and employ it to estimate the MD of living zebrafish (Danio rerio) larvae trunk tissue. Our results illustrate the importance of implementing this methodology not only for MD estimations but for many other related biophysical problems, such as mechanical measurements using Brillouin microscopy and transient optical coherence elastography.

Experimental study on ultra-high sensitivity gold-based SPR sensor for refractive index and temperature measurement

We have experimentally demonstrated an ultra-high sensitivity gold-based fiber refractive index (RI) sensor whose main structure is composed of multimode fiber (MMF) and photonic crystal fiber (PCF). The gold film is deposited on V-shaped PCF by magnetron sputtering, and sensing experiments are performed based on the principle of surface plasmon resonance (SPR). Numerical simulation results indicate that the cladding mode of the V-shaped PCF is more capable of stimulating the SPR effect than the core mode. The experimental results show that the RI measurement range of the sensor is 1.333–1.421, with a maximum sensitivity of 10015 nm/RIU. In addition to RI sensing, sensing probes can be coated with polydimethylsiloxane (PDMS) on a gold film for temperature sensing. For temperature detection, the range is from 10 to 100 °C and the maximum sensitivity is 3.5 nm/℃. Besides high sensitivity in RI measurement, the proposed sensor also has good sensing performance in temperature sensing. With the advantages of high sensitivity, good stability, and easy preparation, this sensor has become an important reference in the field of high-performance sensing.

Bowtie design for thermal expansion mimicry and mitigation

A geometric bowtie design for the purpose of mimicking (matching) and/or mitigating (reducing) the thermal expansion effects between two laterally opposing structures is investigated. A bowtie design is that of two opposing overlapping triangles with farthest sides parallel. This design embodies thermal centering concepts which utilize the relationships of the trigonometric identity known as the law of sines for a triangle from which beneficial thermal properties can be engineered. For validation. The bowtie design is embodied using two separated Zerodur plane mirrors, symmetrically opposed, and each seated in Maxwell-style kinematic couplings of spheres and vee-groves. The vee-grooves form a wheel-like pattern on an aluminum baseplate. The intersection of the vee-grooves is the common overlapping thermal center of both mirror mounts. The refractive-index corrected interferometric measurement of the displacement between these two mirrors shows that even during non-isothermal non-equilibrium transitions and states, the nominal ∼90 μm thermally induced (13 °C) expansion of an aluminum baseplate can be mitigated, being reduced more than 98 % to ∼1.4 μm by mimicking the thermal expansion properties of the mirrors’ structural material. Engineering thermally-invariant kinematic bowtie designs using materials having higher thermal expansion coefficients is also described.

Refractive index measurements of liquids from 0.5 to 2 µm using Rayleigh interferometry

There is growing interest in the refractive index of liquids beyond the visible and into the short-wave infrared (SWIR) for applications such as the study of liquid-core fibers and supercontinuum generation. However, most of the data reported are in the visible. For liquids with a wide transmission window in the SWIR region, refractive index data are sparse. We present a Rayleigh interferometry-based refractometer to characterize the refractive index relative to standard materials at seven different wavelengths (543.4, 632.8, 780, 973, 1064, 1550, and 1970 nm) at a temperature of ~ 21.3 ± 0.6 °C. We also show Sellmeier fits using our results juxtaposed with previously published data. Our data extends previous work to the SWIR.

Metasurface array for single-shot spectroscopic ellipsometry

Spectroscopic ellipsometry is a potent method that is widely adopted for the measurement of thin film thickness and refractive index. Most conventional ellipsometers utilize mechanically rotating polarizers and grating-based spectrometers for spectropolarimetric detection. Here, we demonstrated a compact metasurface array-based spectroscopic ellipsometry system that allows single-shot spectropolarimetric detection and accurate determination of thin film properties without any mechanical movement. The silicon-based metasurface array with a highly anisotropic and diverse spectral response is combined with iterative optimization to reconstruct the full Stokes polarization spectrum of the light reflected by the thin film with high fidelity. Subsequently, the film thickness and refractive index can be determined by fitting the measurement results to a proper material model with high accuracy. Our approach opens up a new pathway towards a compact and robust spectroscopic ellipsometry system for the high throughput measurement of thin film properties.

Dual D-shaped plastic optical fiber for simultaneous measurement of refractive index and temperature based on specklegram

The refractive index (RI) measurment of the liquid often changes with the sensor's temperature. Accurate RI measurements require simultaneous measurements of the liquid temperature to calibrate the RI measurement. This study proposed what we believe to be a novel dual D-shaped plastic optical fiber sensor capable of simultaneously measuring both RI and temperature. A fluorescent material made of rhodamine B (RhB) is embedded in one of the D-shaped structures of the dual D-shaped fiber, which can be excited by a green laser to produce orange fluorescence. The fluorescence and the input laser of the fiber are superimposed at the output end of the fiber to form a specklegram containing information of two wavelengths. It was found through experiments that the effects of temperature and RI change on the red and green channels of the specklegrams are different, and the neural network can learn this feature to complete the measurement of both RI and temperature parameters. For RI sensing, the maximum error between the average predicted value and the true value of the test set is 0.0005. For temperature sensing, the maximum error between the average predicted value and the true value of the test set is 0.26°C. In addition, because the intensity change of the fluorescence varies linearly with RI and temperature, the sensor also has good stability.

Reflection based silicon incorporated silver coated fiber optic SPR sensor for refractive index and temperature measurement

Reflection based silicon incorporated silver coated fiber optic SPR sensor for refractive index and temperature measurement