Reformation Of Disulfide Bonds Research Articles

Preparation of Yellowing-Resistant Waterborne Polyurethane Modified with Disulfide Bonds.

Waterborne polyurethane, renowned for its lightweight properties, excellent insulation capabilities, and corrosion resistance, has found extensive application in fields such as construction, automotive, leather, and thermal insulation. Nevertheless, during operational usage, waterborne polyurethane materials, akin to other polymeric substances, are susceptible to oxidative aging manifestations like yellowing, cracking, and diminished mechanical performance, significantly curtailing their utility. Consequently, the synthesis of yellowing-resistant polyurethane assumes pivotal significance. This study integrates dynamic reversible reactions into the synthesis process of polyurethane by introducing the dynamic reversible compound 2-hydroxyethyl disulfide as a chain extender, alongside the incorporation of a UV absorber to enhance the polyurethane's resistance to yellowing. When the disulfide bonds absorb heat, they undergo cleavage, yielding thiols that spontaneously recombine into disulfide bonds at ambient temperatures, allowing for the continuous breaking and reformation of disulfide bonds to absorb heat. Concurrently, in collaboration with the UV absorber, the detrimental effects of ultraviolet radiation on the polyurethane material are mitigated, thereby augmenting its resistance to yellowing. This study scrutinizes the positioning of UV absorber addition, the quantity of UV absorber, and the molar ratio of 1,4-butanediol to 2-hydroxyethyl disulfide, characterizing the functional groups of polyurethane through infrared and Raman spectroscopy. It is observed that the successful preparation of yellowing-resistant polyurethane is achieved, and evaluations on the modified polyurethane through color difference, tensile, and centrifugal tests reveal that the optimal yellowing resistance is attained by adding a UV absorber at a mass fraction of 1% to 3% prior to chain extension, resulting in a color change grade of 2, denoting slight discoloration. Simultaneously, the other properties of polyurethane exhibit relative stability. Notably, when the molar ratio of 1,4-butanediol to 2-hydroxyethyl disulfide is 3:2, the overall performance of the polyurethane remains stable, with exceptional yellowing resistance capabilities attaining a color change grade of 2.

Reversible Protein Capture and Release by Redox-Responsive Hydrogel in Microfluidics.

Stimuli-responsive hydrogels have a wide range of potential applications in microfluidics, which has drawn great attention. Double cross-linked hydrogels are very well suited for this application as they offer both stability and the required responsive behavior. Here, we report the integration of poly(N-isopropylacrylamide) (PNiPAAm) hydrogel with a permanent cross-linker (N,N′-methylenebisacrylamide, BIS) and a redox responsive reversible cross-linker (N,N′-bis(acryloyl)cystamine, BAC) into a microfluidic device through photopolymerization. Cleavage and re-formation of disulfide bonds introduced by BAC changed the cross-linking densities of the hydrogel dots, making them swell or shrink. Rheological measurements allowed for selecting hydrogels that withstand long-term shear forces present in microfluidic devices under continuous flow. Once implemented, the thiol-disulfide exchange allowed the hydrogel dots to successfully capture and release the protein bovine serum albumin (BSA). BSA was labeled with rhodamine B and functionalized with 2-(2-pyridyldithio)-ethylamine (PDA) to introduce disulfide bonds. The reversible capture and release of the protein reached an efficiency of 83.6% in release rate and could be repeated over 3 cycles within the microfluidic device. These results demonstrate that our redox-responsive hydrogel dots enable the dynamic capture and release of various different functionalized (macro)molecules (e.g., proteins and drugs) and have a great potential to be integrated into a lab-on-a-chip device for detection and/or delivery.

Self-Assembled Pea Protein Isolate Nanoparticles with Various Sizes: Explore the Formation Mechanism.

Pea protein isolate nanoparticles (PPINs) were successfully prepared by potassium metabisulfite (K2S2O5). The disulfide bonds were disrupted by K2S2O5, and then the PPINs were formed through self-assembly. The average diameter of PPINs increased from 124.7 to 297.5 nm as the concentration of K2S2O5 was increased from 2 to 8 mM, and the PPINs showed higher ζ-potentials (-32.2 to -35.8 mV) and unimodal distribution. The content of free sulfhydryl groups first increased and then decreased with the fracture and reformation of disulfide bonds. Subsequently, the increase of the β-sheet, which has considerable hydrophobicity, promoted the formation of PPINs. The formation mechanism of PPINs was explored by dissociation tests: hydrophobic interactions maintained the basic skeleton of PPINs, disulfide bonds stabilized the internal structure, and hydrogen bonds existed on the exterior of the particles. This study provided a simple and economical method to fabricate nanoparticles.

Insights into the Redox Chemistry of Organosulfides Towards Stable Molecule Design in Nonaqueous Energy Storage Systems

AbstractNonaqueous redox flow batteries (RFBs) have great potential to achieve high‐energy storage systems. However, they have been limited by low solubility and poor stability of active materials. Here we demonstrate organosulfides as a new‐type model material system to explore the rational design of redox‐active molecules in nonaqueous systems. The tetraethylthiuram disulfide (TETD) molecule shows high solubility in various common organic solvents and achieves a high reversible capacity of ca. 50 Ah L−1 at a high concentration of 1 M. The resonance structures in the reduced product endow the molecule with high electrochemical stability in different organic electrolytes. The underlying mechanism in redox chemistry of organodisulfides involving the cleavage and reformation of disulfide bonds is revealed by material/structural characterizations. This study provides a new perspective of molecule designs for the development of redox‐active materials for high‐performance nonaqueous RFBs.

Insights into the Redox Chemistry of Organosulfides Towards Stable Molecule Design in Nonaqueous Energy Storage Systems

AbstractNonaqueous redox flow batteries (RFBs) have great potential to achieve high‐energy storage systems. However, they have been limited by low solubility and poor stability of active materials. Here we demonstrate organosulfides as a new‐type model material system to explore the rational design of redox‐active molecules in nonaqueous systems. The tetraethylthiuram disulfide (TETD) molecule shows high solubility in various common organic solvents and achieves a high reversible capacity of ca. 50 Ah L−1 at a high concentration of 1 M. The resonance structures in the reduced product endow the molecule with high electrochemical stability in different organic electrolytes. The underlying mechanism in redox chemistry of organodisulfides involving the cleavage and reformation of disulfide bonds is revealed by material/structural characterizations. This study provides a new perspective of molecule designs for the development of redox‐active materials for high‐performance nonaqueous RFBs.

Computational insights into O-glycosylation in a CTLA4 Fc-fusion protein linker and its impact on protein quality attributes

The hinge region of immunoglobulin G1 (IgG1) is used as a common linker for Fc-fusion therapeutic proteins. With the advances of high-resolution mass spectrometry and sample treatment strategies, unexpected O-linked glycosylation has been observed in the linker. However, the molecular mechanism involved in this unusual posttranslational modification is unknown. In this study, we applied site-direct mutagenesis, mass spectrometry, analytical chromatography, and computational modeling to investigate O-glycosylation processes in a clinically used CTLA4 Fc-fusion protein and its impacts on protein quality attributes. Surprisingly, O-glycans could be formed at new sites when an initial O-glycosylation site was eliminated, and continued to occur until all potential O-glycosylation sites were nulled. Site-preference of O-glycosylation initiation was attributed to the complex formation between the linker peptide and glycan transferase whereas the O-glycosylating efficiency and the linker flexibility were correlated using molecular modeling and simulations. As predicted, O-glycan-free CTLA4 Fc-fusion proteins were more homogenous for sialylation, and interestingly less prone to protein aggregation. Attenuating protein aggregation was a desirable effect, and could be related to the reduced presence of linker O-glycans that hindered inter-chain disulfide bond reformation. Findings from this study shed light on new therapeutic protein design and development.

Double‐crosslinked reversible redox‐responsive hydrogels based on disulfide–thiol interchange

ABSTRACTWe present novel redox‐responsive hydrogels based on poly(N‐isopropylacrylamide) or poly(acrylamide), consisting of a reversible disulfide crosslinking agent N,N′‐bis(acryloyl)cystamine and a permanent crosslinking agent N,N′‐methylenebisacrylamide for microfluidic applications. The mechanism of swelling/deswelling behavior starts with the cleavage and reformation of disulfide bonds, leading to a change of crosslinking density and crosslinking points. Raman and ultraviolet‐visible spectroscopy confirm that conversion efficiency of thiol–disulfide interchange up to 99%. Rheological analysis reveals that the E modulus of hydrogel is dependent on the crosslinking density and can be repeatedly manipulated between high‐ and low‐stiffness states over at least 5 cycles without significant decrease. Kinetic studies showed that the mechanical strength of the gels changes as the redox reaction proceeds. This process is much faster than the autonomous diffusion in the hydrogel. Moreover, cooperative diffusion coefficient (Dcoop) indicates that the swelling process of the hydrogel is affected by the reduction reaction. Finally, this reversibly switchable redox behavior of bulky hydrogel could be proven in microstructured hydrogel dots through short‐term photopatterning process. These hydrogel dots on glass substrates also showed the desired short response time on cyclic swelling and shrinking processes known from downsized hydrogel shapes. Such stimuli‐responsive hydrogels with redox‐sensitive crosslinkers open a new pathway in exchanging analytes for sensing and separating in microfluidics applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2590–2601

Top-Down Characterization of Proteins with Intact Disulfide Bonds Using Activated-Ion Electron Transfer Dissociation.

Here we report the fragmentation of disulfide linked intact proteins using activated-ion electron transfer dissociation (AI-ETD) for top-down protein characterization. This fragmentation method is then compared to the alternative methods of beam-type collisional activation (HCD), electron transfer dissociation (ETD), and electron transfer and higher-energy collision dissociation (EThcD). We analyzed multiple precursor charge states of the protein standards bovine insulin, α-lactalbumin, lysozyme, β-lactoglobulin, and trypsin inhibitor. In all cases, we found that AI-ETD provides a boost in protein sequence coverage information and the generation of fragment ions from within regions enclosed by disulfide bonds. AI-ETD shows the largest improvement over the other techniques when analyzing highly disulfide linked and low charge density precursor ions. This substantial improvement is attributed to the concurrent irradiation of the gas phase ions while the electron-transfer reaction is taking place, mitigating nondissociative electron transfer, helping unfold the gas phase protein during the electron transfer event, and preventing disulfide bond reformation. We also show that AI-ETD is able to yield comparable sequence coverage information when disulfide bonds are left intact relative to proteins that have been reduced and alkylated. This work demonstrates that AI-ETD is an effective fragmentation method for the analysis of proteins with intact disulfide bonds, dramatically enhancing sequence ion generation and total sequence coverage compared to HCD and ETD.

Linking Mechanochemistry to Protein Folding at the Single Bond Level

The impact of post translational modifications (PTM) on protein folding remains elusive. S-sulfenylation is the first oxidation step of cysteinyl thiols to create sulfenic acid. This PTM has emerged as a key sensor that modulates protein function and redox signalling. Here we use single molecule force clamp spectroscopy to create a stable sulfenic acid conformation by promoting an OH- nucleophilic attack on a single disulfide bond embedded within the core of the 27th immunoglobulin domain of titin (I27). By applying a tailor-designed force protocol, we set out to study the effect of S-sulfenylation on the oxidative folding of the I27 protein. We observe that sulfenic acid is a necessary precursor that facilitates enzymatic-free disulfide bond reformation. Furthermore, this disulfide reformation mechanism competes with the evolution of sulfenic acid to higher oxidation state species, which ultimately triggers protein misfolding. These results demonstrate that the oxidation state of a single amino acid within a protein has the power to completely alter the outcome of protein folding.

Rapid Protein Digestion and Purification with Membranes Attached to Pipet Tips.

This paper presents rapid protein purification and proteolysis methods that integrate membrane technology and pipet tips. Pushing a protein-containing solution through a protease-modified membrane at the end of a pipet tip digests proteins in 30 s or less, and the short proteolysis time avoids reformation of disulfide bonds to enable tryptic digestion without alkylation of cysteine residues. Moreover, proteolysis is more complete than digestion for 30 min in solution. Antibody digestion at the end of a pipet tip leads to 100% peptide coverage in MS analyses. Similarly, when membranes contain Ni(2+) complexes, pipetting aqueous polyhistidine-tagged protein through the membrane and subsequent rinsing and elution yield purified polyhistidine-tagged protein in 2 min. These applications demonstrate the potential for combining functional membranes and pipet tips for rapid sample purification and pretreatment.

Preparation of S-sulfo albumin film and its cell adhesive property

Recently, large-scale production of the pharmaceutical grade recombinant human serum albumin was achieved, and several clinical trials have proved its safety and efficacy. Albumin is thought to be a candidate for a safe biopolymer sources for application to biomaterials. In this study, we treated albumin with sodium sulfite and sodium tetrathionate to give S-sulfo albumin, which was found to loose native albumin structure by CD spectra analysis and dye-binding assay. A water-insoluble S-sulfo albumin films were prepared by drying S-sulfo albumin solution and subsequent reformation of disulfide bonds by the oxidation with iodine. Ultimate strength, ultimate elongation and Young's modulus of S-sulfo albumin film prepared at room temperature were 3.3 ± 0.4 MPa, 30.8 ± 3.2% and 40.8 ± 3.3 MPa before oxidative treatment and changed to 13.8 ± 4.2 MPa, 5.6 ± 2.8% and 401.7 ± 15.3 MPa after oxidative treatment. When the film was prepared at 60 °C, similar tendency was observed. Thus, the disulfide bonds formation between albumin molecules by oxidative treatment converted the film stronger and stiffer. Cell adhesion and proliferation on the films were evaluated using mouse L929 fibroblast cells. Cell adhesion largely depended on the albumin structure; that is, cells did not attach to native albumin coated surfaces, while cell adhesion and proliferation occurred on the S-sulfo albumin films which lost their native albumin structure. Eighty percent of seeded cells were adhered on S-sulfo albumin films and proliferated well in a similar manner to those on the conventional culture dish. Our results indicate that S-sulfo albumin is a favorable cell culture substrate.

Gametes Alter the Oviductal Secretory Proteome

The mammalian oviduct provides an optimal environment for the maturation of gametes, fertilization, and early embryonic development. Secretory cells lining the lumen of the mammalian oviduct synthesize and secrete proteins that have been shown to interact with and influence the activities of gametes and embryos. We hypothesized that the presence of gametes in the oviduct alters the oviductal secretory proteomic profile. We used a combination of two-dimensional gel electrophoresis and liquid chromatography-tandem mass spectrometry to identify oviductal protein secretions that were altered in response to the presence of gametes in the oviduct. The oviductal response to spermatozoa was different from its response to oocytes as verified by Western blotting. The presence of spermatozoa or oocytes in the oviduct altered the secretion of specific proteins. Most of these proteins are known to have an influence on gamete maturation, viability, and function, and there is evidence to suggest these proteins may prepare the oviductal environment for arrival of the zygote. Our findings suggest the presence of a gamete recognition system within the oviduct capable of distinguishing between spermatozoa and oocytes.

Sulfhydryl Based Cationic Surfactants and the Impact of Polyanions on Disulfide Bond Formation: Implications for Gene Transfer Vectors

Compacting plasmid DNA (pDNA) into a small size is a fundamental necessity for the efficient in vivo transfer of nucleic acids to somatic cells. An approach for accomplishing this is to condense pDNA using cationic detergents with sulfhydryl groups, near their critical micelle concentration. In this study, a model surfactant was used to study how the rate of disulfide bond formation relates to environmental factors. It was shown that the thiol detergent had the ability to form a disulfide bond when oxidized and the presence of polyanions was significantly increased. The addition of a reducing agent disrupted the disulfide bonds initially, but this was followed by disulfide bond reformation in a short time period.

Entrapment of islets into reversible disulfide hydrogels.

Currently, there are three types of devices for a bioartificial pancreas; microencapsulation, an extravascular diffusion chamber, and an intravascular diffusion chamber. The purpose of the present study was to provide a new extracellular matrix hydrogel for the devices of extra- and intravascular diffusion chamber types. As the sol-gel transition of this hydrogel is reversible, refilling of islets in vivo will be possible without a severe traumatic procedure. The hydrogel was produced from a polyacrylamide derivative carrying thiol groups synthesized by radical copolymerization of acrylamide and N,N'-bis-acrylcystamine, followed by reduction of the disulfide bonds in the copolymer. This water-soluble copolymer was used to entrap hamster islets by re-formation of disulfide bonds on the copolymer to produce a hydrogel. The formed hydrogel was easily reliquefied by reduction of the disulfide crosslinks to thiols. Insulin release from the islet-entrapped hydrogel continued for more than 1 month when examined in vitro. A static glucose stimulation test for the entrapped islets exhibited an increased insulin release.

The reducing agent dithiothreitol (DTT) does not abolish the inhibitory nicotinic response recorded from rat dorsolateral septal neurons

Previous intracellular recordings have demonstrated that dorsolateral septal nucleus (DLSN) neurons express a novel nicotinic receptor which produces a direct membrane hyperpolarization when activated by nicotinic agonists. Activation of the classical excitatory nicotinic receptors has been shown to require a disulfide bond involving the cysteines at positions 192 and 193 of the α subunits of the receptor. Reduction of this cystine bond with dithiothreitol (DTT) abolishes agonist activation of excitatory nicotinic receptors. We have now examined whether DTT treatment of the inhibitory nicotinic receptor on DLSN neurons also abolishes the inhibitory nicotinic response. We find that the inhibitory response persists after treatment of the neurons with 1 mM DTT, even if the reduction is followed by alkylation of the receptor with bromoacetylcholine to prevent possible reformation of disulfide bonds. This result suggests that the agonist binding site on the inhibitory nicotinic receptor does not require an intact disulfide bond, similar to the bond on the α subunit of the excitatory nicotinic receptor, for agonist activation of the receptor. Some of these results have been previously reported in abstract form.

A specific, high affinity, saturable binding site for the 16-kilodalton fragment of prolactin on capillary endothelial cells.

A 16-kilodalton N-terminal fragment of PRL (16K PRL) is formed by enzymatic cleavage of intact 23-kilodalton PRL (23K PRL) in the pituitary gland and in target tissues for PRL. 16K PRL inhibits the growth of capillary endothelial cells, while intact PRL was inactive suggesting that 16K PRL acted via a receptor other than the PRL receptor. To analyze whether this inhibitory effect could be mediated through an specific 16K PRL receptor, we characterized the binding of 16K PRL to membrane preparations of bovine brain capillary endothelial (BBE) cells. 16K PRL was generated by the proteolysis of rat 23K PRL with a particulate fraction from rat mammary gland homogenates and purified by gel filtration. The specific binding of [125I]16K PRL to BBE cell membranes was high affinity (Kd = 9.9 nM), saturable (Bmax = 4.8 pmol/mg protein), and reversible. In competition studies for [125I]16K PRL binding, 16K PRL was most potent, while little displacement was observed with high concentrations of 23K PRLs, growth hormones, and basic fibroblast growth factor. Blockade of reformation of disulfide bonds by carbamidomethylation of 16K PRL, a procedure which increases the biological activity of the molecule, increased its binding affinity (Kd = 0.9 nM). Cross-linking experiments identified a 52,000 and a 32,000 mol wt protein as the major 16K PRL binding species. These data demonstrate the presence of specific, high affinity, saturable binding sites for 16K PRL on BBE cell membranes and support biological findings that 16K PRL inhibits capillary endothelial cell proliferation, through a novel, high affinity receptor.

The 16K Fragment of Prolactin Specifically Inhibits Basal or Fibroblast Growth Factor Stimulated Growth of Capillary Endothelial Cells

Intact 23 kilodalton (kDa), rat PRL is enzymatically cleaved in many target tissues to a 16 kDa (16K PRL) and an 8 kDa fragment. After reduction of an internal disulfide bond the fragments are released. 16K PRL was shown to be a potent mitogen on mammary epithelial cells via PRL receptors. Since estradiol-induced prolactinomas develop a new blood supply we tested the action of intact PRL and 16K PRL on growth of new vessels (angiogenesis). The angiogenic action of intact PRL and 16K PRL was tested in cultured bovine brain and adrenal cortex endothelial cells. Basal (b) or b-fibroblast growth factor (FGF) stimulated growth was estimated by counting cells or measuring the level of incorporation of 3H-thymidine into DNA. Paradoxically, 16K PRL inhibited the basal and FGF-stimulated growth of cultured endothelial cells in a dose-dependent fashion. Intact PRL or the cleaved but not reduced PRL were inactive even at a 100-fold higher concentration. When reformation of disulfide bonds was inhibited by carbamidomethylation of 16K PRL the preparations were more potent. 16K PRL had no effect on the mitogenic action of bFGF on baby hamster kidney cells which are known to have FGF receptors. These data demonstrate that in vitro 16K PRL is a potent and specific angiolytic factor, i.e. it inhibits angiogenesis. Furthermore, the action of 16K PRL does not appear to be via the known PRL or FGF receptors. Since angiogenesis is an essential component of tumor growth 16K PRL has potential as a therapeutic agent for the treatment of cancer.

The mapping of an antibody-binding region on the Mycobacterium tuberculosis 19 kilodalton antigen.

To localize the epitopes of four independently derived murine mAb IT-10, IT-12, IT-16, and IT-19 on the 19-kDa Ag protein of Mycobacterium tuberculosis, expression plasmids were constructed containing deletions of the gene encoding the 19-kDa protein. Reaction of the 4 mAb with Western blots of the truncated recombinant proteins revealed two epitope specificities in the recognition of the 19-kDa protein. IT-10 was found to be dependent only on the presence of amino acids surrounding the first cysteine residue, whereas IT-12, IT-16, and IT-19 all required the presence of both the first and third cysteine residues. These two cysteine residues are separated by 135 amino acids, and are considered to be brought together by tertiary folding of the protein to form an assembled epitope for IT-12, IT-16, and IT-19. These three mAb demonstrated differing sensitivities to the modification of reduced 19-kDa protein using iodoacetamide: a treatment that should have prevented the reformation of disulfide bonds within the protein. This result suggests that, although IT-12, IT-16, and IT-19 appear to be specific for the same epitope, there are probably fine-specificity differences in this recognition. IT-10 was not sensitive to the absence of disulfide bonds within the 19-kDa protein, suggesting that the epitope is not conformationally sensitive, and is likely to be linear in nature.

Evidence for the presence of disulfide bridges in opioid receptors essential for ligand binding. Possible role in receptor activation

The mobility of purified mu opioid binding protein in SDS-polyacrylamide gek electrophoresis is sensitive to the presence of reducing agents. In the presence of increasing concentrations of DTT the apparent molecular weight increases in a stepwise fashion from 53 kDa to 65 kDa. This reduction in mobility is attributed to the successive breakage of disulfide bridges, resulting in an increasingly asymmetric molecule. Treatment of cell membranes from various brain areas with reducing agents, such as DTT, produced a concentration-dependent inhibition of opioid binding. Sensitivity to DTT inhibition varied between receptor types, mu greater than delta much greater than kappa. For mu receptors, agonist binding was considerably more sensitive to DTT than antagonist binding. Inhibition by DTT is readily reversible and is unaffected by Na+ and/or Mg2+ ions. Reversibility may be partially prevented by the inclusion of a low concentration of a reducing reagent such as glutathione which does not inhibit binding but blocks reformation of disulfide bonds. Scatchard analysis of saturation data shows that DTT causes a pronounced decrease in binding affinity with little effect on receptor number. It is suggested that disulfide bonds are essential for ligand binding and that cleavage of one or more of these bonds may play a role in opioid receptor activation by agonists.

Statistics of disulfide bond formation in proteins

A new set of statistical expressions describing the reformation of disulfide bonds from SH groups is proposed. The results of the statistical calculations of disulfide bond reformation are discussed in terms of protein folding.