Reduction In Bacterial Growth Research Articles

Isolation and characterization of bacteriophages specific to Streptococcus equi subspecies zooepidemicus and evaluation of efficacy ex vivo

Streptococcus (S.) equi subspecies (subsp.) zooepidemicus is an important facultative pathogen in horses and can cause severe infections in other species including humans. Facing the post-antibiotic era, novel antimicrobials are needed for fighting bacterial infections. Bacteriophages (phages) are the natural predators of bacteria and discussed as a promising antimicrobial treatment option. The objective of this study was to isolate and characterize S. equi subsp. zooepidemicus-specific phages for the first time and to evaluate their efficacy in vitro and ex vivo. In total, 13 phages with lytic activity were isolated and host ranges were determined. Two phages with broad host ranges and high efficiency of plating (vB_SeqZP_LmqsRe26-2 (lytic activity: 30/37 bacterial isolates) and vB_SeqZP_LmqsRe26-3 (lytic activity: 29/37 bacterial isolates)) and one phage with relatively low efficiency of plating (vB_SeqZP_LmqsRe26-1) were selected for further characterization, including electron microscopy and whole genome sequencing. In in vitro planktonic killing assays at two tested multiplicities of infection (MOI 1 and MOI 10), significant bacterial growth reduction was observed when the phages vB_SeqZP_LmqsRe26-2 and vB_SeqZP_LmqsRe26-3 were added. These phages were subsequently co-incubated with clinical S. equi subsp. zooepidemicus isolates in an equine endometrial explant model but did not achieve bacterial growth reduction at MOI 1 and MOI 10. However, helium ion microscopy revealed presence of particles adherent to the bacteria on the explant after incubation (25 h), suggesting possible phage-bacteria interactions. In conclusion, phages against S. equi subsp. zooepidemicus were successfully isolated and characterized. Promising results were observed in in vitro but no significant reduction was detected in ex vivo experiments, requiring additional investigations. However, after further adaptations (e.g., optimization of MOIs and phage administration or use of phage-antibiotic combination), phages could be a potential antimicrobial tool for future therapeutic use in S. equi subsp. zooepidemicus infections, although the available results do not currently support the therapeutic usage.

Comparing the Antibacterial Efficacy of Morus Alba (Mulberry Leaf) Extract and 0.2% Chlorhexidine: An Invitro Assay

Background: Morus Alba is being used for the treatment of diabetes to reduce blood sugar levels. It has also shown antimicrobial and anti-inflammatory activity against Candida albicans, Saccharomyces cerevisiae, Escherichia coli, Salmonella typhimurium, Staphylococcus epidermis, and S. aureus. Extracts of the bark of Morus alba have also shown bactericidal activity against the oral Streptococci. Aim: To compare the antibacterial efficacy of Morus Alba (mulberry leaf) extract with 0.2% chlorhexidine gluconate mouthwash. Material & methods: The Morus Alba aqueous leaf extraction was carried out by using the hot maceration technique with deionised water, and the minimal inhibition concentration (MIC) of the of the Morus Alba aqueous leaf extract was evaluated against the biofilm-forming Streptococcus mutans. Results: The minimal inhibition concentration (MIC) of hot methanol extract of Morusalba (2.5 mg/ 10 ml) was used to study its effect on bacterial growth. As the concentration of Morus Alba aqueous leaf extract increases, the OD values decrease, indicating reduced bacterial growth. The reduction percentage increases with higher concentrations of leaf extract, showing a dose-dependent inhibition of Streptococcus mutans. The 0.2% CHX shows the highest reduction, confirming its effectiveness. Conclusion: The aqueous extract of Morus Alba mouthwash shows a significant inhibitory effect on Streptococcus mutans, with higher concentrations leading to a greater reduction in bacterial growth.

Effect of pH and hydroxyapatite-like layer formation on the antibacterial properties of borophosphate bioactive glass incorporated poly(methyl methacrylate) bone cement.

Infection is a leading cause of total joint arthroplasty failure. Current preventative measures incorporate antibiotics into the poly (methyl methacrylate) (PMMA) bone cement that anchors the implant into the natural bone. With bacterial resistance to antibiotics on the rise, the development of alternative antibacterial materials is crucial to mitigate infection. Borate bioactive glass, 13-93-B3, has been studied previously for use in orthopedic applications due to its ability to be incorporated into bone cements and other scaffolds, convert into hydroxyapatite (HA)-like layer, and enhance the osseointegration and antibacterial properties of the material. The purpose of this study is to better understand how glass composition and change in surrounding pH effects the composite's antibacterial characteristics by comparing the incorporation of 30% wt/wt 13-93-B3 glass and pH neutral borophosphate bioactive glass into PMMA bone cement. We also aim to elucidate how HA-like layer formation on the cement's surface may affect bacterial adhesion. These studies showed that 13-93-B3 incorporated cements had significant reduction of bacterial growth surrounding the composite beyond 24h of exposure when compared to a neutral borate bioactive glass incorporated cement (p < 0.01) and cement only (p < 0.0001). Additionally, through soaking cement composites in simulated body fluid and then exposing them to a bioluminescent strand of staphylococcus aureus, we found that the presence of a HA-like layer on the 13-93-B3 or pH neutral glass incorporated cement disks resulted in an increase in bacterial attachment on the composite cement's surface, where p < 0.001, and p < 0.05 respectively. Overall, our studies demonstrated that borate bioactive glass incorporated PMMA bone cement has innate antimicrobial properties that make it a promising material to prevent infection in total joint arthroplasties.

The anti-biofilm efficacy of copper and zinc doped borate bioactive glasses.

Aim: Healthcare-acquired infections (HAIs) pose significant challenges in medical settings due to their resistance to conventional treatment methods. The role of bacterial biofilms in exacerbating these infections is well-documented, making HAIs particularly difficult to eradicate. Despite numerous research efforts, an effective solution to combat these infections remains elusive. This study aims to explore the potential of metal-ion (copper and zinc) doped borate bioactive glasses (BBGs) as a novel treatment modality to inhibit bacterial species commonly implicated in HAIs: Staphylococcus epidermidis, Escherichia coli, and Pseudomonas aeruginosa.Methods: The study analyzed the efficacy of both direct and indirect applications of BBGs on severe biofilms pre-formed under static and dynamic growth conditions; a comprehensive predictive modeling was developed, simulating diverse clinically relevant conditions.Results: Results demonstrate more than 4 log reduction in bacterial growth within 2days for direct application and 3days for indirect application of copper and zinc-doped BBGs. These findings were consistent across the three bacterial species, in both static and dynamic conditions.Conclusion: Copper and zinc-doped BBGs can be an effective approach in combating HAIs complicated by biofilms.

Formulation of Dual-Functional Nonionic Cetomacrogol Creams Incorporated with Bacteriophage and Human Platelet Lysate for Effective Targeting of MDR P. aeruginosa and Enhanced Wound Healing.

Successful development of phage-based therapeutics and their utility predominantly depend on the mode and route of phage administration. Topical and site-directed phage application evokes minimal immune clearance and allows more phage-host adsorption, thereby ensuring higher phage efficacy. However, a notable drawback of conventional topical phage applications is the absence of sustained release. Occlusive emollients guarantee the controlled release of active pharmaceutical ingredients (APIs), thereby facilitating administration, preventing moisture loss, and acting as a skin barrier. In this study, we developed phage and human platelet lysate (h-PL) incorporated cetomacrogol-based creams for combined phage therapy and wound healing. The base material for phage immobilization was formulated by emulsifying paraffin and sterile water with cetomacrogol (emulsifying agent). Specifically, we incorporated a Pseudomonas aeruginosa-infecting lytic phage vB_PaeM_M12PA in the formulation and characterized its genome in this study. Cetomacrogol, a nonionic PEG (polyethylene glycol) based ether, rendered phage stability and allowed initial burst release followed by continuous controlled release of phages from the embedding matrix in the initial 6-8 h. Rheological studies showed that the material has elastic properties with storage moduli (G') values ranging from 109.51 ± 2.10 to 126.02 ± 3.13 kPa, indicating frequency-independent deformation. Platelet lysates in the cream acted as wound healing agents, and in vitro evaluation of cell migration and wound healing capacity of h-PL showed a significant enhancement by the sixth hour compared to untreated groups. The phage-incorporated cream showed sustained phage release in solid media and a significant reduction in bacterial growth in liquid cultures. In vivo wound healing studies in 6-week-old Wistar rats with full-thickness excision wounds and subsequent histopathological studies showed that the formulation enhanced wound healing and tissue restoration efficiency. In conclusion, the study unveils a promising approach for integrated phage therapy and wound healing strategies.

Two marine sulfur-reducing bacteria co-culture is essential for productive infection by a T4-like Escherichia coli-infecting phage

The control of microbiologically influenced corrosion (MIC) challenges the oil exploration sector. The MIC results from electrochemical reactions facilitated by microorganisms such as sulfate-reducing bacteria (SRB), which adhere to the surface of the ducts forming biofilms. SRB uses sulfate as the final electron acceptor, resulting in hydrogen sulfide as the final product, a highly reactive corrosive, and toxic compound. Due to the high diversity of the SRB group, this study evaluated the effect of an Escherichia coli phage, with biofilm degrading enzymes, in preventing biofilm formation by microbial consortium P48SEP and reducing H2S production in a complex SRB community. Three phage concentrations were evaluated (104, 108 and 1012 UFP/ml). High and medium phage concentrations prevented biofilm development, as evidenced by scanning electron microscopy, chemical analysis, and cell counts. In addition, the virus altered the expression pattern of some bacterial genes and the relative abundance of proteins related to biofilm formation and cell stress response. Using a complex culture formed mainly by SRB, it was possible to observe the bacterial growth, H2S, and metabolic activity reduction after the phage was added. This study shows for the first time the ability of an E. coli-infecting phage to prevent the biofilm formation of an SRB consortium and infect and replicate at high concentrations on the non-specific host. This new finding turns the use of non-specific phages a promising alternative for the control of biocorrosion in oil and gas installations, on the other side, alert to the use of large concentration of phages and the influence on bacterial groups with geological importance, opening a research field in phage biology.

Evaluating the antibacterial, antibiofilm, and anti-toxigenic effects of postbiotics from lactic acid bacteria on Clostridium difficile.

The most common cause of healthcare-associated diarrhea is Clostridium difficile infection (CDI), which causes severe and recurring symptoms. The increase of antibiotic-resistant C. difficile requires alternate treatments. Postbiotics, metabolites produced by probiotics, fight CDI owing to their antibacterial capabilities. This study aims to evaluate the antibacterial, antibiofilm, and anti-toxigenic potential of postbiotics in combating CDI. GC-MS evaluated postbiotics from Bifidobacterium bifidum and Lactobacillus plantarum. Disk diffusion and broth microdilution determined C. difficile antibacterial inhibition zones and MICs. Microtiter plates assessed antibiofilm activity. MTT assay evaluated postbiotics anti-viability on HEK293. ELISA testing postbiotic detoxification of toxins A and B. Postbiotics were examined for tcdA and tcdB genes expression using real-time PCR. The most identified B. bifidum and L. plantarum postbiotic compounds were glycolic acid (7.2%) and butyric acid (13.57%). B. bifidum and L. plantarum displayed 13 and 10 mm inhibition zones and 2.5 and 5 mg/ml MICs against C. difficile. B. bifidum reduced biofilm at 1.25 mg/ml by 49% and L. plantarum by 31%. MTT assay showed both postbiotics had little influence on cell viability, which was over 80%. The detoxification power of postbiotics revealed that B. bifidum decreased toxin A and B production more effectively than L. plantarum, and also their related tcdA and tcdB genes expression reduction were statistically significant (p < 0.05). Postbiotics' ability to inhibit bacterial growth, biofilm disruption, and toxin reduction makes them a promising adjunctive for CDI treatment and a good solution to pathogens' antibiotic resistance.

Phytoremediation of crude oil-contaminated soil using Vigna Unguiculata and associated rhizosphere bacteria

Persistent crude oil contamination poses a significant environmental challenge. In this study, the efficacy of Vigna unguiculata (L.) and associated rhizospheric microorganisms in remediating crude oil-contaminated soil within a microcosm setting was investigated. A randomized block design was employed, and soil samples were subjected to varying degrees of contamination: 0% (UR), 2.5% (CR2), 5.0% (CR5), 7.5% (CR7), and 10.0% (CR10) w/w crude oil. The investigation aimed to assess the potential of Vigna unguiculata (L.) in mitigating crude oil contamination across these defined contamination gradients. The plant growth and crude oil removal were monitored concurrently post-emergence. Plant emergence and growth were significantly affected due to contamination, especially among plants in CR5 and CR10. The bacterial population was higher in the rhizosphere, and the treatments with lower hydrocarbon contamination. It was shown that plant density encouraged the growth of bacterial communities. Significant reduction in soil TPH was observed in CR2 (76.61%) and CR7 (65.88%). There was a strong correlation between plant growth and oil-utilizing bacterial population (r2 = 0.966) and plant growth and hydrocarbon reduction (r2 = 0.956), signifying the role of plant-bacterial synergy. Saturate fractions (C30 – C32) were significantly degraded to lower molecular weight compounds (C11 – C14). Except in CR5 and CR10, the remediation within the cowpea rhizosphere was effective even at regulatory standards. Understanding the rhizosphere ecological dynamics would further highlight the role the bacteria played; hence, it is recommended.

Minocycline-rifampin-impregnated penile prosthesis surfaces retain antimicrobial activity following irrigation with 0.05% chlorhexidine gluconate and antibiotic solutions.

0.05% Chlorhexidine gluconate (CHG; Irrisept [IrriMax]) is a commercial wound irrigation solution approved by the Food and Drug Administration that has seen recent adoption in the field of prosthetic urology; however, no study has evaluated whether 0.05% CHG is compatible with the minocycline-rifampin-impregnated surface (InhibiZone) of the AMS 700 penile prosthesis (Boston Scientific). To evaluate whether 0.05% CHG alters the antibiotic efficacy of the minocycline-rifampin-impregnated penile prosthesis surface. Discs (8 mm) were taken by a punch biopsy (Sklar) from sterile penile prosthesis reservoirs whose surfaces had been impregnated with rifampin and minocycline. Discs (n = 10) were suspended in 0.05% CHG, vancomycin and gentamicin, or normal saline for 2minutes to simulate intraoperative irrigation. Discs were then rinsed in normal saline to remove any unbound solution and incubated with methicillin-sensitive Staphylococcus aureus for 48hours. Adherent surface bacteria were suspended by shaking in a 0.3% Tween 20 solution, serially diluted, plated onto 3M PetriFilms, and counted. Kirby-Bauer disc diffusion assays were conducted to generalize findings across various organisms. Outcomes included (1) bacterial adherence to the implant surface measured as bacterial counts (in colony-forming units per milliliter) and (2) bacterial growth reduction measured as zones of inhibitions (in millimeters). Incubation of implant surfaces in 0.05% CHG did not alter recovered bacterial counts as compared with normal saline and vancomycin/gentamycin. Similarly, within a single bacterial species, 0.05% CHG and vancomycin/gentamycin did not alter zone-of-inhibition measurements in Kirby-Bauer disc diffusion studies. This study demonstrates in vitro that 0.05% CHG may be used directly on the minocycline-rifampin-impregnated surface without altering the antibiotic efficacy of the coating. Strengths include that this is the first study to evaluate if 0.05% CHG affected the minocycline-rifampin-impregnated surface. Limitations include the use of in vitro studies, which serve as a proxy for in vivo practices and may not be entirely accurate or translatable in a clinical setting. 0.05% CHG does not alter the antimicrobial activity of the minocycline-rifampin-impregnated surface as compared with vancomycin/gentamycin and normal saline in vitro; however, its efficacy in clinical practice remains to be evaluated.

Exploring the viability of anti-microbial, superhydrophobic jute bags as an approach to sustainable food packaging system

Jute in food packaging offers several advantages, including cost-effectiveness, biodegradability, renewability, and low environmental impact. Nevertheless, its hydrophilic characteristic makes it susceptible to airborne humidity and precipitation moisture. We combated this by chemically treating jute to make it water-resistant. The coated jute (WCA = ∼162°) exhibits high mechanical endurance against exposure to air (>1 month), ultrasonic washing (6 h), brush scrubbing (>50 cycles), and mutual abrasion (>150 cycles), along with good thermal stability. During a 2-month experiment involving seed storage in an RH of 85%, wheat grains stored in the coated bag showed 8.08% less moisture content than that stored in control. Furthermore, the preserved grains in the control jute exhibited altered colour, texture, and fungal development. Additionally, compared to the control, the coated jute delivers >50% bacterial growth reduction in 48 h. The proposed jute offers a sustainable packaging solution that promotes eco-friendly practices and reduces plastic waste.

Novel antimicrobial applications of copper oxide nanoparticles after combination with tissue conditioner used in complete prostheses

BackgroundTissue conditioners are used for treating and improving the tissues supporting complete dentures. On the other hand, recent advances in nanotechnology have revolutionized various fields of science, including dentistry. The present study aimed to investigate novel antimicrobial applications of copper oxide nanoparticle-based tissue conditioner used in complete prostheses.MethodsThe present experimental study included 126 tissue conditioner samples with different concentrations of copper oxide nanoparticles (20%, 10%, 5%, 2.5%, 1.25%, 0.625%, and 0% w/w). The samples were incubated with Enterococcus faecalis, Pseudomonas aeruginosa, and Candida albicans in 24-well plates for 24 h. Then, samples from the wells were re-incubated for 24 h, and the microorganisms were counted.ResultsThe culture media containing E. faecalis and P. aeruginosa showed significantly different growth between different nanoparticle concentrations following 24 h (P < 0.001), showing a reduction in bacterial growth with increased nanoparticle concentration. Both bacteria did not show any growth at the 20% concentration. However, C. albicans showed significant differences in growth between different nanoparticle concentrations following 48 h (P < 0.001), showing a reduction in growth with increased nanoparticle concentration. Also, the least growth was observed at the 20% concentration.ConclusionsIn conclusion, the CuO nanoparticles were prepared using a green synthesis methon in the suitable sizes. Moreover, the tissue conditioners containing CuO nanoparticles showed acceptable antimicrobial properties against E. faecalis, P. aeruginosa, and C. albicans.

Regulation of anti-phage defense mechanisms by using cinnamaldehyde as a quorum sensing inhibitor.

Multidrug-resistant bacteria and the shortage of new antibiotics constitute a serious health problem. This problem has led to increased interest in the use of bacteriophages, which have great potential as antimicrobial agents but also carry the risk of inducing resistance. The objective of the present study was to minimize the development of phage resistance in Klebsiella pneumoniae strains by inhibiting quorum sensing (QS) and thus demonstrate the role of QS in regulating defense mechanisms. Cinnamaldehyde (CAD) was added to K. pneumoniae cultures to inhibit QS and thus demonstrate the role of the signaling system in regulating the anti-phage defense mechanism. The QS inhibitory activity of CAD in K. pneumoniae was confirmed by a reduction in the quantitative expression of the lsrB gene (AI-2 pathway) and by proteomic analysis. The infection assays showed that the phage was able to infect a previously resistant K. pneumoniae strain in the cultures to which CAD was added. The results were confirmed using proteomic analysis. Thus, anti-phage defense-related proteins from different systems, such as cyclic oligonucleotide-based bacterial anti-phage signaling systems (CBASS), restriction-modification (R-M) systems, clustered regularly interspaced short palindromic repeat-Cas (CRISPR-Cas) system, and bacteriophage control infection (BCI), were present in the cultures with phage but not in the cultures with phage and CAD. When the QS and anti-phage defense systems were inhibited by the combined treatment, proteins related to phage infection and proliferation, such as the tail fiber protein, the cell division protein DamX, and the outer membrane channel protein TolC, were detected. Inhibition of QS reduces phage resistance in K. pneumoniae, resulting in the infection of a previously resistant strain by phage, with a significant increase in phage proliferation and a significant reduction in bacterial growth. QS inhibitors could be considered for therapeutic application by including them in phage cocktails or in phage-antibiotic combinations to enhance synergistic effects and reduce the emergence of antimicrobial resistance.

3D printed scaffolds with quercetin and vitamin D3 nanocarriers: In vitro cellular evaluation.

Increasing bone diseases and anomalies significantly challenge bone regeneration, necessitating the development of innovative implantable devices for effective healing. This study explores the potential of 3D-printed calcium phosphate (CaP) scaffolds functionalized with natural medicine to address this issue. Specifically, quercetin and vitamin D3 (QVD) encapsulated solid lipid nanoparticles (QVD-SLNs) are incorporated into the scaffold to enhance bone regeneration. The melt emulsification method is utilized to achieve high drug encapsulation efficiency (~98%) and controlled biphasic release kinetics. The process-structure-property performance of these systems allows more controlled release while maintaining healthy cell-material interactions. The functionalized scaffolds show ~1.3- and ~-1.6-fold increase in osteoblast cell proliferation and differentiation, respectively, as compared with the control. The treated scaffold demonstrates a reduction in osteoclastic activity as compared with the control. The QVD-SLN-loaded scaffolds show ~4.2-fold in vitro chemopreventive potential against osteosarcoma cells. Bacterial assessment with both Staphylococcus aureus and Pseudomonas aeruginosa shows a significant reduction in bacterial colony growth over the treated scaffold. These findings summarize that the release of QVD-SLNs through a 3D-printed CaP scaffold can treat various bone-related disorders for low or non-load-bearing applications.

Antibacterial activity of microwave synthesized hydroxyapatite against cariogenic bacteria: A preliminary study

IntroductionThe effects of hydroxyapatite (HA) on oral bacteria and biofilm remains inconclusive, with conflicting results. Studies assessing its effect against caries-causing bacteria are limited. ObjectiveThis study aimed to explore the antibacterial activity of HA synthesized using microwave against two of the most common cariogenic bacteria, Streptococcus mutans (S. mutans) and Streptococcus sobrinus (S. sobrinus). MethodsHA was chemically synthesized using a microwave. To verify the existence of the crystalline phase and the calcium and phosphate content, X-ray diffraction (XRD) and energy-dispersive X-ray (EDX) analysis were employed, respectively. Reduction in bacterial growth was used to assess the antibacterial effects of 10 %, 20 %, and 30 % HA against the tested bacteria. ResultsThe presence of the hydroxyapatite crystallite phase was verified using XRD, while EDX revealed the Calcium to Phosphorus (Ca/P) ratio to be 1.6. In response to the 10 %, 20 %, and 30 % HA, S. mutans were reduced by 14.5 %, 15.6 %, and 23.4 %, whereas S. sobrinus decreased by 17.1 %, 60.8 %, and 98.6 %, respectively. ConclusionMicrowave-synthesized HA could have antibacterial properties against caries-causing bacteria with different potencies depending on concentration and bacteria.

Harnessing bio-based chelating agents for sustainable synthesis of AgNPs: Evaluating their inherent attributes and antimicrobial potency in conjunction with honey

Greenly synthesized nanoparticles have garnered attention due to their low environmental footprint, but impurities limit their applications. A novel semi-organic method for synthesizing silver nanoparticles (AgNPs) using bio-based chelating fuels (Beta vulgaris subsp., Spinacia oleracea, and Ipomoea batatas) reduces the undesirable impurities. The study also showcases the impact of bio-based chelating fuel on various characteristics of AgNPs in comparison to synthetic chelating fuel. The antimicrobial efficacy of the synthesized AgNPs in conjunction with honey was also assessed against E. coli. The XRD analysis showed cubic structure of AgNPs. The FESEM and TEM analysis showed that the well-connected spherical-shaped AgNPs (∼3–120 nm diameter) while EDS confirmed the presence of Ag in all samples. The TEM analysis also revealed layers of carbonates in AgNPs synthesized using bio-based chelating fuels. XPS investigation confirmed the absence of any prominent impurities in prepared samples and AgNPs have not experienced oxidation on their surface. However, notable surface charging effects due to the uneven conductivity of the particles were observed. The broth dilution method showed that all mixtures containing AgNPs in combination with honey exhibited a significant bacterial growth reduction over a period of 120 h. The highest growth reduction of ∼75 % is obtained for the mixture having AgNPs (Ipomoea batatas) while the least growth reduction of ∼51 % is obtained for the mixture having AgNPs (Beta vulgaris subsp.). The findings affirm that AgNPs can be successfully synthesized using bio-based chelating fuels with negligible ecological consequences and devoid of contaminants. Moreover, the synthesized AgNPs can be employed in conjunction with honey for antibacterial purposes.

Clean synthesis of silver nanoparticles (AgNPs) on polyamide fabrics by Verbascum thapsus L. (mullein) extract: characterization, colorimetric, antibacterial, and colorfastness studies.

The production of antibacterial colored textiles using nanomaterials (NMs) has become an ideal goal from both a research and industrial perspective. In this study, the clean synthesis and characterization of silver nanoparticles (AgNPs) on polyamide fabrics were performed using mullein extract for the first time. Natural dyes were extracted from mullein leaves using an ultrasonic method, with an optimal amount of 15g/L. The synthesized AgNPs in different ratios of mullein extract and Ag ions were analyzed (using UV-visible spectroscopy) and dynamic light scattering (DLS). It was found that AgNPs synthesized with a ratio of 1:4 of mullein extract: to Ag ions had a diameter of 85nm. The active site groups of the synthesized AgNPs were characterized using Fourier transform infrared spectroscopy (FT-IR). Nylon fabrics dyed with different ratios of mullein extract and Ag ions exhibited acceptable color strength values (K/S) of 3.36. Furthermore, the reduction in bacterial growth for dyed fabrics improved with an increase in the ratio of Ag ions, with a 100% reduction observed for a sample dyed with mullein extract: Ag ions at a ratio of 1:4. Overall, this method offers a simple, low-cost, and compatible process with environment without the consumption of any chemicals to producing nylon with acceptable antibacterial and dyeing properties.

Synergistic Improvement of Antibacterial and Osteogenic Differentiation of Thermomechanically Processed Mg-Zr-Sr-Ce Alloy: Insights into the Role of Precipitate Evolution Supported by AIMD Simulation Study.

In the present study, we have discussed the influence of forging temperature (623 K (FT623), 723 K (FT723) and 823 K (FT823)) on microstructure and texture evolution and its implication on mechanical behavior, in vitro-in vivo biocorrosion, antibacterial response, and cytocompatibility of microalloyed Mg-Zr-Sr-Ce alloy. Phase analysis, SEM, and TEM characterization confirm the presence of Mg12Ce precipitate, and its stability was further validated by performing ab initio molecular dynamic simulation study. FT723 exhibits strengthened basal texture, higher fraction of second phases, and particle-stimulated nucleation-assisted DRX grains compared to other two specimens, resulting in superior strength with comparable ductility. FT723 also exhibits superior corrosion resistance mainly due to the strengthened basal texture and lower dislocation density. All the specimens exhibit excellent antibacterial behavior with Gram-negative E. coli, Gram-positive Staphylococcus aureus, and Pseudomonas aeruginosa bacteria. 100% reduction of bacterial growth is observed within 24 h of culture of the specimens. Cytocompatibility was determined by challenging specimen extracts with the MC3T3-E1 cell lines. FT723 specimen exhibits the highest cell proliferation and alkaline phosphatase activity (ALP) because of its superior corrosion resistance. The ability of the specimens to be used in orthopedic implant application was evaluated by in vivo study in rabbit femur. Neither tissue-related infection nor the detrimental effect surrounding the implant was confirmed from histological analysis. Significant higher bone regeneration surrounding the FT723 specimen was observed in SEM analysis and fluorochrome labeling. After 60 days, the FT723 specimen exhibits the highest bone formation, suggesting it is a suitable candidate for orthopedic implant application.

Local Production of World Health Organization Recommended Hand Rub Formulation and Comparison of its Efficacy with a Commercially Available Alcohol-Based Hand Rub

Objective: To produce a World Health Organization (WHO)-recommended hand rub formulation locally and compare its efficacy with a commercially available Alcohol-based Hand Rub (ABHR) - Sterillium. Methods: A non-randomized comparative study was conducted. Sixty healthcare workers were divided into two groups - Group A (WHO-recommended hand rub) and Group B (Sterillium). WHO-recommended hand rub was prepared according to the specified formula. Each participant from study Group A received three ml of WHO-recommended hand rub formulation, and each study Group B participant received three ml of Sterillium. Bacterial samples of each participant (from both hands) were collected before and 0 after using an ABHR solution. Samples were inoculated on the nutrient agar plates and incubated at 37 C for 24 hours. The total number of bacterial colonies grown on plates inoculated before and after ABHR use was counted and identified by standard microbiology techniques and compared between the two groups. The WHO-recommended hand rub and Sterillium were compared and analyzed using differences in proportion. Results: The overall reduction in bacterial growth was comparable for both the hand rubs, with an average load reduction of log 1.5607 for locally produced hand rub solution and an average load reduction of log 1.609 in the case of Sterillium. Conclusion: Both of the handrubs are comparable in efficacy and are effective against all the bacteria isolated from the palms of HCWs (Coagulase Negative Staphylococcus (CoNS), Micrococcus spp., Acinetobacter spp., Bacillus spp., Pseudomonas spp., and Citrobacter), including Methicillin-Sensitive Staphylococcus aureus

Improving osseointegration and antimicrobial properties of titanium implants with black phosphorus nanosheets-hydroxyapatite composite coatings for vascularized bone regeneration.

For decades, titanium implants have shown impressive advantages in bone repair. However, the preparation of implants with excellent antimicrobial properties as well as better osseointegration ability remains difficult for clinical application. In this study, black phosphorus nanosheets (BPNSs) were doped into hydroxyapatite (HA) coatings using electrophoretic deposition. The coatings' surface morphology, roughness, water contact angle, photothermal properties, and antibacterial properties were investigated. The BP/HA coating exhibited a surface roughness of 59.1 nm, providing an ideal substrate for cell attachment and growth. The water contact angle on the BP/HA coating was measured to be approximately 8.55°, indicating its hydrophilic nature. The BPNSs demonstrated efficient photothermal conversion, with a temperature increase of 42.2°C under laser irradiation. The BP/HA composite coating exhibited a significant reduction in bacterial growth, with inhibition rates of 95.6% and 96.1% against Staphylococcus aureus and Escherichia coli. In addition, the cytocompatibility of the composite coating was evaluated by cell adhesion, CCK8 and AM/PI staining; the effect of the composite coating in promoting angiogenesis was assessed by scratch assay, transwell assay, and protein blotting; and the osteoinductivity of the composite coating was evaluated by alkaline phosphatase assay, alizarin red staining, and Western blot. The results showed that the BP/HA composite coating exhibited superior performance in promoting biological functions such as cell proliferation and adhesion, antibacterial activity, osteogenic differentiation, and angiogenesis, and had potential applications in vascularized bone regeneration.

Determining the potential targets of silybin by molecular docking and its antibacterial functions on efflux pumps and porins in uropathogenic E. coli.

One of the causes of antibiotic resistance is the reduced accumulation of antibiotics in bacterial cells through pumping out the drugs. Silybin, a key component of the Silybum marianum plant, exhibits various beneficial properties, including anti-bacterial, anti-inflammatory, antioxidant, and hepatoprotective effects. Clinical isolates of E. coli were procured from 17 Shahrivar Children's Hospital in Rasht, Guilan, located in northern Iran. Their susceptibility to six antibiotics was assessed using disc diffusion and broth dilution (MIC) methods. The antibacterial effects of silybin-loaded polymersome nanoparticles (SPNs) were investigated with broth dilution (MIC) and biofilm assays. Molecular docking was utilized to evaluate silybin's (the antibacterial component) binding affinity to efflux pumps, porins, and their regulatory elements. Additionally, qRT-PCR analysis explored the expression patterns of acrA, acrB, tolC, ompC, and ompF genes in both SPNs (sub-MIC) and ciprofloxacin (sub-MIC)-treated and untreated E. coli isolates. The combined use of SPNs and ciprofloxacin exhibited a notable reduction in bacterial growth and biofilm formation, in ciprofloxacin-resistant isolates. The study identified eight overlapping binding sites of the AcrABZ-TolC efflux pump in association with silybin, demonstrating a binding affinity ranging from -7.688 to -10.33 Kcal/mol. Furthermore, the qRT-PCR analysis showed that silybin upregulated AcrAB-TolC efflux pump genes and downregulated ompC and ompF porin genes in combination with ciprofloxacin in transcriptional level in uropathogenic E. coli. Silybin, a safe herbal compound, exhibits potential in inhibiting antibiotic resistance within bacterial isolates, potentially through the regulation of gene expression and plausible binding to target proteins.