Reduction Of Photobleaching Research Articles

OpenSTED: open-source dynamic intensity minimum system for stimulated emission depletion microscopy.

Stimulated emission depletion (STED) is a powerful super-resolution microscopy technique that can be used for imaging live cells. However, the high STED laser powers can cause significant photobleaching and sample damage in sensitive biological samples. The dynamic intensity minimum (DyMIN) technique turns on the STED laser only in regions of the sample where there is fluorescence signal, thus saving significant sample photobleaching. The reduction in photobleaching allows higher resolution images to be obtained and longer time-lapse imaging of live samples. A stand-alone module to perform DyMIN is not available commercially. In this work, we developed an open-source design to implement three-step DyMIN on a STED microscope and demonstrated reduced photobleaching for timelapse imaging of beads, cells, and tissue. The DyMIN system uses a fast multiplexer circuit and inexpensive field-programmable gate array controlled by Labview software that operates as a stand-alone module for a STED microscope. All software and circuit diagrams are freely available. We compared time-lapse images of bead samples using our custom DyMIN system to conventional STED and recorded a higher signal when using DyMIN after a 50-image sequence. We further demonstrated the DyMIN system for time-lapse STED imaging of live cells and brain tissue slices. Our open-source DyMIN system is an inexpensive add-on to a conventional STED microscope that can reduce photobleaching. The system can significantly improve signal to noise for dynamic time-lapse STED imaging of live samples.

Azaphosphinate Dyes: A Low Molecular Weight Near-Infrared Scaffold for Development of Photoacoustic or Fluorescence Imaging Probes.

Near-infrared (NIR) dyes are desirable for biological imaging applications including photoacoustic (PA) and fluorescence imaging. Nonetheless, current NIR dyes are often plagued by relatively large molecular weights, poor water solubility, and limited photostability. Herein, we provide the first examples of azaphosphinate dyes which display desirable properties such as low molecular weight, absorption/emission above 750 nm, and remarkable water solubility. In PA imaging, an azaphosphinate dye exhibited a 4.1-fold enhancement in intensity compared to commonly used standards, the ability to multiplex with existing dyes in whole blood, imaging depths of 2.75 cm in a tissue model, and contrast in mice. An improved derivative for fluorescence imaging displayed a >10-fold reduction in photobleaching in water compared to the FDA-approved indocyanine green dye and could be visualized in mice. This new dye class provides a robust scaffold for the development of photoacoustic or NIR fluorescence imaging agents.

Two-photon synthetic aperture microscopy for minimally invasive fast 3D imaging of native subcellular behaviors in deep tissue

Holistic understanding of physio-pathological processes requires noninvasive 3D imaging in deep tissue across multiple spatial and temporal scales to link diverse transient subcellular behaviors with long-term physiogenesis. Despite broad applications of two-photon microscopy (TPM), there remains an inevitable tradeoff among spatiotemporal resolution, imaging volumes, and durations due to the point-scanning scheme, accumulated phototoxicity, and optical aberrations. Here, we harnessed the concept of synthetic aperture radar in TPM to achieve aberration-corrected 3D imaging of subcellular dynamics at a millisecond scale for over 100,000 large volumes in deep tissue, with three orders of magnitude reduction in photobleaching. With its advantages, we identified direct intercellular communications through migrasome generation following traumatic brain injury, visualized the formation process of germinal center in the mouse lymph node, and characterized heterogeneous cellular states in the mouse visual cortex, opening up a horizon for intravital imaging to understand the organizations and functions of biological systems at a holistic level.

Soybean (Glycine max) PHYTOCHROME-INTERACTION FACTOR 1 induced skotomorphogenesis and de-etiolation in Arabidopsis

Skotomorphogenesis occurs after germination and before excavation in plants. It inhibits excessive absorbed energy in cells and can prevent the lethal photooxidative damage caused by transitioning from skotomorphogenesis to photomorphogenesis for light energy utilization. To investigate the mechanisms underlying photoreactions in soybean [Glycine max (L.) Merr.], we identified and isolated soybean phytochrome-interaction factor 1 (GmPIF1). A yeast two-hybrid (Y2H) assay showed that GmPIF1 interacted with photoactive PHYTOCHROME A (PHYA) and B (PHYB) in both soybean and Arabidopsis (GmPHYA, GmPHYB, AtPHYA, and AtPHYB). To analyze its function, we ectopically over-expressed GmPIF1 in wild type and pif1 mutant Arabidopsis. In etiolated seedlings, GmPIF1 caused hypocotyl elongation, cotyledon closed, apical hooks folded, and less accumulation of protochlorophyllide. In Y2H, GmPIF1 interacted with AtHDA15 that inhibited chlorophyll synthesis under dark conditions. After transition from darkness to white light, GmPIF1 promotes the reduction of photobleaching and induced de-etiolation. Moreover, GmPIF1 inhibited PHYA- and PHYB-mediated seed germination. Our findings increase our understanding of the regulatory network of light response in soybean and provide useful gene resources for soybean breeding in programs and genetics engineering.

Parallelized volumetric fluorescence microscopy with a reconfigurable coded incoherent light-sheet array

Parallelized fluorescence imaging has been a long-standing pursuit that can address the unmet need for a comprehensive three-dimensional (3D) visualization of dynamical biological processes with minimal photodamage. However, the available approaches are limited to incomplete parallelization in only two dimensions or sparse sampling in three dimensions. We hereby develop a novel fluorescence imaging approach, called coded light-sheet array microscopy (CLAM), which allows complete parallelized 3D imaging without mechanical scanning. Harnessing the concept of an “infinity mirror”, CLAM generates a light-sheet array with controllable sheet density and degree of coherence. Thus, CLAM circumvents the common complications of multiple coherent light-sheet generation in terms of dedicated wavefront engineering and mechanical dithering/scanning. Moreover, the encoding of multiplexed optical sections in CLAM allows the synchronous capture of all sectioned images within the imaged volume. We demonstrate the utility of CLAM in different imaging scenarios, including a light-scattering medium, an optically cleared tissue, and microparticles in fluidic flow. CLAM can maximize the signal-to-noise ratio and the spatial duty cycle, and also provides a further reduction in photobleaching compared to the major scanning-based 3D imaging systems. The flexible implementation of CLAM regarding both hardware and software ensures compatibility with any light-sheet imaging modality and could thus be instrumental in a multitude of areas in biological research.

Light-sheet microscopy with length-adaptive Bessel beams

In light-sheet microscopy, a confined layer in the focal plane of the detection objective is illuminated from the side. The illumination light-sheet usually has a constant beam length independent of the shape of the biological object. Since the thickness and the length of the illumination light-sheet are coupled, a tradeoff between resolution, contrast and field of view has to be accepted. Here we show that scanned Bessel beams enable object adapted tailoring of the light-sheet defined by its beam length and position. The individual beam parameters are obtained from automatic object shape estimation by low-power laser light scattered at the object. Using Arabidopsis root tips, cell clusters and zebrafish tails, we demonstrate that Bessel beam light-sheet tailoring leads to a 50% increase in image contrast and a 50% reduction in photobleaching. Light-sheet tailoring requires only binary amplitude modulation, therefore allowing a real time illumination adaptation with little technical effort in the future.

Compressed sensing laser scanning microscopy.

We present a measurement and reconstruction method for laser-scanning microscopy based on compressed sensing, which enables significantly higher frame rates and reduced photobleaching. The image reconstruction accuracy is ensured by including a model of the physical imaging process into the compressed sensing reconstruction procedure. We demonstrate its applicability to unmodified commercial confocal fluorescence microscopy systems and for Raman imaging, showing a potential data reduction of 10-15 times, which directly leads to improvements in acquisition speed, or reduction of photobleaching, without significant loss of spatial resolution. Furthermore, the reconstruction model is also robust to noise, and effective for low-light applications. This method has promising applications for all imaging modalities based on laser-scanning acquisition, including fluorescence, Raman, and nonlinear microscopy.

Adaptive illumination reduces photobleaching in structured illumination microscopy

Photobleaching is a major factor limiting the observation time in fluorescence microscopy. We achieve photobleaching reduction in structured illumination microscopy (SIM) by locally adjusting the illumination intensities according to the sample. Adaptive SIM is enabled by a digital micro-mirror device (DMD), which provides a projection of the grayscale illumination patterns. We demonstrate a reduction in photobleaching by a factor of three in adaptive SIM compared to the non-adaptive SIM based on a spot grid scanning approach. Our proof-of-principle experiments show great potential for DMD-based microscopes to become a more useful tool in live-cell SIM imaging.

Reduction of photo bleaching and long term archiving of chemically cleared GFP-expressing mouse brains.

Tissue clearing allows microscopy of large specimens as whole mouse brains or embryos. However, lipophilic tissue clearing agents as dibenzyl ether limit storage time of GFP-expressing samples to several days and do not prevent them from photobleaching during microscopy. To preserve GFP fluorescence, we developed a transparent solid resin formulation, which maintains the specimens' transparency and provides a constant signal to noise ratio even after hours of continuous laser irradiation. If required, high-power illumination or long exposure times can be applied with virtually no loss in signal quality and samples can be archived for years.

Photoabsorption and Resonance Energy Transfer Phenomenon in CdTe−Protein Bioconjugates: An Insight into QD−Biomolecular Interactions

Luminescent quantum dots (QDs) possess unique photophysical properties, which are advantageous in the development of new generation robust fluorescent probes based on Forster resonance energy transfer (FRET) phenomena. Bioconjugation of these QDs with biomolecules create hybrid materials having unique photophysical properties along with biological activity. The present study is aimed at characterizing QD bioconjugates in terms of optical behavior. Colloidal CdTe QDs capped with 3-mercaptopropionic acid (MPA) were conjugated to different proteins by the carbodiimide protocol using N-(3-dimethylaminopropyl)-N-ethylcarbodiimide hydrochloride (EDC) and a coupling reagent like N-hydroxysuccinimide (NHS). The photoabsorption of these QD-protein bioconjugates demonstrated an effective coupling of electronic orbitals of constituents. A linear variation in absorbance of bioconjugates at 330 nm proportionate to conjugation suggests a covalent attachment as confirmed by gel electrophoresis. A red shift in the fluorescence of bovine serum albumin (BSA) due to conjugation inferred a decrease in Stokes shift and solvent polarization effects on protein. A proportionate quenching in BSA fluorescence followed by an enhancement of QD fluorescence point toward nonradiative dipolar interactions. Further, reduction in photobleaching of BSA suggests QD-biomolecular interactions. Bioconjugation has significantly influenced the photoabsorption spectrum of QD bioconjugates suggesting the formation of a possible protein shell on the surface of QD. The experimental result suggests that these bioconjugates can be considered nanoparticle (NP) superstructures for the development of a new generation of robust nanoprobes.

Implementation of a continuous scanning procedure and a line scan camera for thin-sheet laser imaging microscopy.

We report development of a continuous scanning procedure and the use of a time delay integration (TDI) line scan camera for a light-sheet based microscope called a thin-sheet laser imaging microscope (TSLIM). TSLIM is an optimized version of a light-sheet fluorescent microscope that previously used a start/stop scanning procedure to move the specimen through the thinnest portion of a light-sheet and stitched the image columns together to produce a well-focused composite image. In this paper, hardware and software enhancements to TSLIM are described that allow for dual sided, dual illumination lasers, and continuous scanning of the specimen using either a full-frame CCD camera and a TDI line scan camera. These enhancements provided a ~70% reduction in the time required for composite image generation and a ~63% reduction in photobleaching of the specimen compared to the start/stop procedure.

Monolayers of Silver Nanoparticles Decrease Photobleaching: Application to Muscle Myofibrils

Studying single molecules in a cell has the essential advantage that kinetic information is not averaged out. However, since fluorescence is faint, such studies require that the sample be illuminated with the intense light beam. This causes photodamage of labeled proteins and rapid photobleaching of the fluorophores. Here, we show that a substantial reduction of these types of photodamage can be achieved by imaging samples on coverslips coated with monolayers of silver nanoparticles. The mechanism responsible for this effect is the interaction of localized surface plasmon polaritons excited in the metallic nanoparticles with the transition dipoles of fluorophores of a sample. This leads to a significant enhancement of fluorescence and a decrease of fluorescence lifetime of a fluorophore. Enhancement of fluorescence leads to the reduction of photodamage, because the sample can be illuminated with a dim light, and decrease of fluorescence lifetime leads to reduction of photobleaching because the fluorophore spends less time in the excited state, where it is susceptible to oxygen attack. Fluorescence enhancement and reduction of photobleaching on rough metallic surfaces are usually accompanied by a loss of optical resolution due to refraction of light by particles. In the case of monolayers of silver nanoparticles, however, the surface is smooth and glossy. The fluorescence enhancement and the reduction of photobleaching are achieved without sacrificing the optical resolution of a microscope. Skeletal muscle myofibrils were used as an example, because they contain submicron structures conveniently used to define optical resolution. Small nanoparticles (diameter ∼60 nm) did not cause loss of optical resolution, and they enhanced fluorescence ∼500-fold and caused the appearance of a major picosecond component of lifetime decay. As a result, the sample photobleached ∼20-fold more slowly than the sample on glass coverslips.

High-speed, low-photodamage nonlinear imaging using passive pulse splitters

Pulsed lasers are key elements in nonlinear bioimaging techniques such as two-photon fluorescence excitation (TPE) microscopy. Typically, however, only a percent or less of the laser power available can be delivered to the sample before photoinduced damage becomes excessive. Here we describe a passive pulse splitter that converts each laser pulse into a fixed number of sub-pulses of equal energy. We applied the splitter to TPE imaging of fixed mouse brain slices labeled with GFP and show that, in different power regimes, the splitter can be used either to increase the signal rate more than 100-fold or to reduce the rate of photobleaching by over fourfold. In living specimens, the gains were even greater: a ninefold reduction in photobleaching during in vivo imaging of Caenorhabditis elegans larvae, and a six- to 20-fold decrease in the rate of photodamage during calcium imaging of rat hippocampal brain slices.

Minimizing photobleaching in fluorescence microscopy by depleting triplet states

A technique for minimizing photobleaching in fluorescence microscopy is proposed. One of the prominent reason for photobleaching is the involvement of metastable triplet states during the excitation-emission process. Photobleaching minimization is achieved by depleting triplet states (T1→S0) employing a depletion pulse just after the excitation pulse thereby resulting in highly populated singlet ground state S0. Thus, the next excitation pulse can cause rapid population inversion (S0→S1) due to the availability of electrons in the ground state. This increases the fraction of population that is undergoing fluorescence (S1→S0), whereas the depletion pulse continuously depletes the triplet states. An interesting phase transition from occupied to unoccupied triplet state is observed. The excitation-depletion cycle is continued throughout the imaging process. The performance of such a system is examined through theoretical calculation and computational study of population dynamics. Substantial reduction in photobleaching of fluorescent molecules such as fluorescein promises several interesting applications in bioimaging, microscopy, and other optical studies.

Reduction of photobleaching and photodamage in single molecule detection: observing single actin monomer in skeletal myofibrils

Recent advances in detector technology make it possible to achieve single molecule detection (SMD) in a cell. SMD avoids complications associated with averaging signals from large assemblies and with diluting and disorganizing proteins. However, it requires that cells be illuminated with an intense laser beam, which causes photobleaching and cell damage. To reduce these effects, we study cells on coverslips coated with silver nanoparticle monolayers (NML). Muscle is used as an example. Actin is labeled with a low concentration of fluorescent phalloidin to assure that less than a single molecule in a sarcomere is fluorescent. On a glass substrate, the fluorescence of actin decays in a step-wise fashion, establishing a single molecule detection regime. Single molecules of actin in living muscle are visualized for the first time. NML coating decreases the fluorescence lifetime 17 times and enhances intensity ten times. As a result, fluorescence of muscle bleaches four to five times slower than on glass. Monolayers decrease photobleaching because they shorten the fluorescence lifetime, thus decreasing the time that a fluorophore spends in the excited state when it is vulnerable to oxygen attack. They decrease damage to cells because they enhance the electric field near the fluorophore, making it possible to illuminate samples with weaker light.

Studying Slow Membrane Dynamics with Continuous Wave Scanning Fluorescence Correlation Spectroscopy

Here we discuss the application of scanning fluorescence correlation spectroscopy (SFCS) using continuous wave excitation to analyze membrane dynamics. The high count rate per molecule enables the study of very slow diffusion in model and cell membranes, as well as the application of two-foci fluorescence cross-correlation spectroscopy for parameter-free determination of diffusion constants. The combination with dual-color fluorescence cross-correlation spectroscopy with continuous or pulsed interleaved excitation allows binding studies on membranes. Reduction of photobleaching, higher reproducibility, and stability compared to traditional FCS on membranes, and the simple implementation in a commercial microscopy setup make SFCS a valuable addition to the pool of fluorescence fluctuation techniques.