Reduce Surface Contamination Research Articles

"Alexa, Cycle The Blood Pressure": A Voice Control Interface Method for Anesthesia Monitoring.

Anesthesia monitors and devices are usually controlled with some combination of dials, keypads, a keyboard, or a touch screen. Thus, anesthesiologists can operate their monitors only when they are physically close to them, and not otherwise task-loaded with sterile procedures such as line or block placement. Voice recognition technology has become commonplace and may offer advantages in anesthesia practice such as reducing surface contamination rates and allowing anesthesiologists to effect changes in monitoring and therapy when they would otherwise presently be unable to do so. We hypothesized that this technology is practicable and that anesthesiologists would consider it useful. A novel voice-driven prototype controller was designed for the GE Solar 8000M anesthesia patient monitor. The apparatus was implemented using a Raspberry Pi 4 single-board computer, an external conference audio device, a Google Cloud Speech-to-Text platform, and a modified Solar controller to effect commands. Fifty anesthesia providers tested the prototype. Evaluations and surveys were completed in a nonclinical environment to avoid any ethical or safety concerns regarding the use of the device in direct patient care. All anesthesiologists sampled were fluent English speakers; many with inflections from their first language or national origin, reflecting diversity in the population of practicing anesthesiologists. The prototype was uniformly well-received by anesthesiologists. Ease-of-use, usefulness, and effectiveness were assessed on a Likert scale with means of 9.96, 7.22, and 8.48 of 10, respectively. No population cofactors were associated with these results. Advancing level of training (eg, nonattending versus attending) was not correlated with any preference. Accent of country or region was not correlated with any preference. Vocal pitch register did not correlate with any preference. Statistical analyses were performed with analysis of variance and the unpaired t -test. The use of voice recognition to control operating room monitors was well-received anesthesia providers. Additional commands are easily implemented on the prototype controller. No adverse relationship was found between acceptability and level of anesthesia experience, pitch of voice, or presence of accent. Voice recognition is a promising method of controlling anesthesia monitors and devices that could potentially increase usability and situational awareness in circumstances where the anesthesiologist is otherwise out-of-position or task-loaded.

Impact of terminal cleaning in rooms previously occupied by patients with healthcare-associated infections.

Healthcare associated infections (HAIs) are costly but preventable. A limited understanding of the effects of environmental cleaning on the riskiest HAI associated pathogens is a current challenge in HAI prevention. This project aimed to quantify the effects of terminal hospital cleaning practices on HAI pathogens via environmental sampling in three hospitals located throughout the United States. Surfaces were swabbed from 36 occupied patient rooms with a laboratory-confirmed, hospital- or community-acquired infection of at least one of the four pathogens of interest (i.e., Acinetobacter baumannii (A. baumannii), methicillin resistant Staphylococcus aureus (MRSA), vancomycin resistant Enterococcus faecalis/faecium (VRE), and Clostridioides difficile (C. difficile)). Six nonporous, high touch surfaces (i.e., chair handrail, bed handrail, nurse call button, desk surface, bathroom counter near the sink, and a grab bar near the toilet) were sampled in each room for Adenosine Triphosphate (ATP) and the four pathogens of interest before and after terminal cleaning. The four pathogens of interest were detected on surfaces before and after terminal cleaning, but their levels were generally reduced. Overall, C. difficile was confirmed on the desk (n = 2), while MRSA (n = 24) and VRE (n = 25) were confirmed on all surface types before terminal cleaning. After cleaning, only MRSA (n = 6) on bed handrail, chair handrail, and nurse call button and VRE (n = 5) on bathroom sink, bed handrail, nurse call button, toilet grab bar, and C. difficile (n = 1) were confirmed. At 2 of the 3 hospitals, pathogens were generally reduced by >99% during terminal cleaning. One hospital showed that VRE increased after terminal cleaning, MRSA was reduced by 73% on the nurse call button, and VRE was reduced by only 50% on the bathroom sink. ATP detections did not correlate with any pathogen concentration. This study highlights the importance of terminal cleaning and indicates room for improvement in cleaning practices to reduce surface contamination throughout hospital rooms.

A universal method for determining the detergent effect of surfactants

Surfactants are indispensable in industrial applications today due to their wetting, emulsifying, dispersing, cleansing, and detergent properties. The use of surfactants extends from the cosmetic industry to the petroleum industry and beyond.Their characteristics and effectiveness can be assessed through various standardized tests, and based on these methods, their applications can be determined. However, there is a lack of a universally applicable testing method for one crucial and complex property: the detergent effect.The detergent effect refers to the removal of unwanted contaminants from a solid surface. However, cleaning is not solely attributed to the surfactant but to the appropriate combination of various factors, whose synergistic effect reduces surface contamination. The most significant factors influencing detergent effect include the characteristics and nature of the contaminants, properties of the cleaning solution (surfactant concentration and composition, water hardness, enzymes, etc.), temperature, washing time, and hydrodynamic conditions. Additionally, the presence of electrolytes, pH of the cleaning solution, and detergent foaming properties may also play important roles.Our goal was to develop a detergent effect testing methodology that is not specific to any particular application domain but offers a straightforward and easy-to-implement solution for comparing the detergent effect of various types of surfactants.•The study presents a method for determining detergent effect of surfactants.•The method is universal and suitable for the evaluation of any type of surfactant.•The method is low-cost and easy to perform.

Assessing the impact of a cleaning programme on environmental hygiene in labour and neonatal wards: an exploratory study in The Gambia.

Effective surface cleaning in hospitals is crucial to prevent the transmission of pathogens. However, hospitals in low- and middle-income countries face cleaning challenges due to limited resources and inadequate training. We assessed the effectiveness of a modified TEACH CLEAN programme for trainers in reducing surface microbiological contamination in the newborn unit of a tertiary referral hospital in The Gambia. We utilised a quasi-experimental design and compared data against those from the labour ward. Direct observations of cleaning practices and key informant interviews were also conducted to clarify the programme's impact. Between July and September 2021 (pre-intervention) and October and December 2021 (post-intervention), weekly surface sampling was performed in the newborn unit and labour ward. The training package was delivered in October 2021, after which their surface microbiological contamination deteriorated in both clinical settings. While some cleaning standards improved, critical aspects such as using fresh cleaning cloths and the one-swipe method did not. Interviews with senior departmental and hospital management staff revealed ongoing challenges in the health system that hindered the ability to improve cleaning practices, including COVID-19, understaffing, disruptions to water supply and shortages of cleaning materials. Keeping a hospital clean is fundamental to good care, but training hospital cleaning staff in this low-income country neonatal unit failed to reduce surface contamination levels. Further qualitative investigation revealed multiple external factors that challenged any possible impact of the cleaning programme. Further work is needed to address barriers to hospital cleaning in low-income hospitals.

Germicidal Efficiency of 272 nm LED in Relation to the Hospital Strain of Klebsiella Pneumoniae

Relevance. Currently, the use of ultraviolet (UV) radiation for the disinfection of objects and the treatment for infectious diseases is considered as a promising alternative to chemical biocides and antibiotics. Shortwave — UV-C and UV-B -light emitting diodes (LED) are a relatively new type of UV radiation sources and potentially able to meet the requirements of current medical technologies. However, their possibilities for the treatment of wounds and infectious diseases have not been practically researched to date, which determines the relevance of experiments aimed at studying the biocidal and therapeutic properties of shortwavelength UV LEDs.Purpose. OF STUDY To evaluate the bactericidal efficacy of 272 nm LED radiation against hospital strains of Klebsiella pneumoniae bacteria characterized by multidrug resistance.Materials and Methods. The studies were carried out with an experimental sample of the LED apparatus for UV irradiation. In the irradiator of the device, 5 LEDs are installed with a maximum radiation at a wavelength of 272 nm and a total electrical power of 10 watts. The UV radiation dose achieved in one irradiation session (12 seconds) at a distance of 10 cm from the irradiator was 8 mJ/cm2 . In the experiments, a hospital strain of the bacterium Klebsiella pneumoniae, isolated from the patient’s blood, was used. The strain was characterized by multidrug resistance. A daily culture suspension of K. pneumoniae with a concentration of 108 CFU/ml in a volume of 100 µl was transferred into a Petri dish with a diameter of 9 cm with meat-peptone agar and evenly distributed over a surface with a diameter of 8 cm. Petri dishes were irradiated from a distance of 10 cm from the irradiator. The change in the dose of UV irradiation from 4 to 80 mJ/cm2 was carried out by varying the exposure time. Studies were carried out in 4 repetitions at each dose. After irradiation, the experimental and control (without irradiation) Petri dishes were placed in a thermostat at 37ºC for 24 hours, then the grown colonies were counted. A total of 60 experiments were carried out.Results. As a result of the research, it was shown that the LED device based on five 272 nm diodes provides deep and prompt disinfection of the surface from hospital strains of K. pneumoniae bacteria characterized by multidrug resistance. A dose of UV radiation of 8 mJ/cm2 reduces surface contamination with K. pneumoniae bacteria by more than a million times (decontamination efficiency over 99.9999%). At doses less than 10 mJ/cm2 , the efficiency of the 272 nm LED device in terms of inactivation of K. pneumoniae bacteria is 3–4 times higher than the bactericidal efficiency of mercury lamps.Conclusion.The prospects of using UV devices based on LEDs with a maximum radiation at a wavelength of 272 nm in systems for the operational disinfection of massively contaminated surfaces, potentially including wound surfaces, have been shown.

Selecting sterilization conditions for the explants of different potato varieties to be in vitro introduced into the culture

An explant is a fragment of plant tissue or organ that is incubated on its own or used to produce a primary callus. The introduction of any plant’s tissues into the culture in vitro begins with the selection of an uninfected viable explant. The authors presented the results of the effect of various sterilizing agents as well as the treatment timing on the viability of plant explants during microclonal propagation of potatoes of the following varieties: Aladin, Gala, Nevsky, Udacha and Kostanay Novosti. The meristem sprouts from potato tubers were used as parent material. The following commercial sterilizing agents were used: Bleach (Belizna), Tween 20, Lyzoformin 3000, 96 % ethyl alcohol. The influence of sterilizing agents as well as the timing of the treatment on the viability of explants and their contamination is analyzed. As a result of the experiments, it has been found that the most effective sterilizing agent is the 3 % bleach and 96 % ethyl alcohol with exposure duration of 10 minutes. Based on the results of the experiment, it is proposed to use the 3 % bleach with an exposure time of 10 minutes as the main sterilizing agent, and the 96 % ethyl alcohol as some pre-treatment of explants to reduce surface contamination. The authors believe that the 96 % ethyl alcohol is the best option for sterilizing solutions since it is a non-toxic, gentle method of sterilization with minimum damage of the plant material tissues.

Comparison of conventionally and digitally completed patient consent-anamnesis forms in terms of surface contamination.

With the development of modern technology, the use of software-based applications in the field of health has become increasingly widespread. For this reason, computer-assisted personal registration forms have been developed using software programs. The aim of this study was to compare surface contamination during the filling of orthodontic anamnesis-consent forms, traditionally on paper and digitally on a tablet equipped with a software application, measured in confined spaces using the 3M Clean-Trace Luminometer device. In order for the participants to complete the orthodontic anamnesis-consent forms, two separate identical cabins with standard flat surfaces were prepared. In the first cabin, the participants conventionally completed these forms on paper (conventional group), while in the second cabin, the other group used a tablet equipped with a software program for this purpose (digital group). After the form completion process, surface pollution of the predetermined areas was measured in both cabins using a 3M Clean-Trace Luminometer device. Surface contamination was found to be statistically significantly higher in all measurement areas in the conventional group than in the digital group. Despite a statistically significant difference between the two groups in relation to the measurements performed using the pens (conventional or electronic), this was not as strong as those found for the remaining surfaces. The completion of orthodontic anamnesis-consent forms over tablets significantly reduced surface contamination in the close environment. This study reflects the importance of digitization - which has become beneficial in many fields - in reducing the spread of infections.

Preparation, nano-mechanics and particle deposition behavior of thin, antifouling hydrogel coatings

Hydrogels based on hydrophilic, crosslinked polymer networks can reduce surface contamination in aqueous environments and continue attracting research interest due to their low adhesion, biocompatibility and tunable properties. In particular, sub-micron hydrogel films can potentially screen a surface from interaction with foulant colloids and microorganisms without compromising original functions, such as water permeation in membranes. This study focuses on the preparation of thin hydrogel films with the goal of understanding their adhesive and micromechanical properties, as well as factors affecting the dynamics of microparticle deposition on such films, mimicking the initial stages of surface fouling with colloids, microparticles and microorganisms. For this purpose, a simple procedure was developed to simultaneously crosslink and covalently anchor multi-arm-PEG precursors to a surface to form a submicron coating as a representative model. The effects of synthetic parameters and external conditions on adhesion and viscoelasticity were studied by force spectroscopy using polystyrene colloidal probes. The same particles were also employed in macroscopic deposition experiments in a parallel plate flow cell under identical solution conditions. Microscopic adhesion and elasticity were unaffected by the hydrogel crosslinking density and by salinity, but strongly affected by solution pH and dwell time, whereas macroscopic deposition was strongly affected both by salinity and by pH. These differences were ascribed to the effect of long-range double-layer forces, involved in deposition but absent in measurements of adhesion and elasticity. The results highlight the differences and similarities between the two types of measurements and underlying phenomena, as a step towards the understanding and rational design of soft antifouling coatings.

Aluminium oxide grid blasting: grid size and blasting pressure influence on the substrate surface contamination, roughness and ceramic plasma spray coating adhesion strength

This paper concerns influence of grit blasting parameters (grid blast media size and blasting pressure) on blasted surface contamination by entrapped grid blast particles and roughness of a blasted mild steel surface and a subsequent influence of given surface specifications on a thermal spray coating adhesion strength. Main goal of an experiment presented in this paper is basic optimization of grid size of alumina oxide blasting medium and blasting pressure in order to reduce surface contamination by grid residues trapped on the surface. Those residues are known to cause reduction in adherent forces between coating and blasted substrate, functioning as major stress concentrators especially under high mechanical and/or temperature loads. Mutual relations between grid size and blasting pressure as input parameters, and surface contamination, surface roughness and adhesion of an atmospheric plasma sprayed ceramic coating is evaluated. It was found that higher surface roughness does not necessarily lead to higher adhesion of thermally sprayed coating. The resulting adhesion strength seems to be determined by the synergistic effect of the suitable roughness profile, residual blasting particles and feedstock particle size of the deposited coating. This is supported by the observed highest adhesions (around 22 MPa) of ceramic alumina-titania APS coating to the surface with lowest measured roughness (as low as Ra 2.7) but also the lowest contamination level by blasting residues (4.6 to 6.7 %).

Effectiveness and Durability of a Quaternary Ammonium Compounds-Based Surface Coating to Reduce Surface Contamination.

Foodborne diseases are of major concern as they have a significant impact on public health, both socially and economically. The occurrence of cross-contamination of food in household kitchens is a serious threat and the adoption of safe food practices is of paramount importance. This work aimed to study the effectiveness and durability of a commercial quaternary ammonium compound-based surface coating which, according to the manufacturer, retains its antimicrobial activity for 30 days, and is suitable for all types of hard surfaces for the prevention and/or control of cross-contamination. For that, its antimicrobial efficacy, killing contact time and durability on three different surfaces-polyvinyl chloride, glass, and stainless-steel-against three pathogens-Escherichia coli ATCC 25922, Acinetobacter baumannii ESB260 and Listeria monocytogenes Scott A-were tested according to the current antimicrobial treated surfaces efficacy test (ISO22196:2011). The results showed that the antimicrobial coating was effective against all pathogens with a reduction of >5.0 log CFU/cm2 in less than one minute for the three surfaces, but its durability was less than one week on all surfaces cleaned in the usual manner. Additionally, trace amounts (≤0.2 mg/kg) of the antimicrobial coating, which may migrate into food when contacting the surface, did not show cytotoxicity to human colorectal adenocarcinoma cells. The suggested antimicrobial coating has the potential to significantly reduce surface contamination, ensure surface disinfection and reduce the likelihood of cross-contamination in domestic kitchens, although it is less durable than suggested. The use of this technology in household settings is an attractive complement to the existing cleaning protocols and solutions that are already in place.

Aerosol Box Use in Reducing Health Care Worker Contamination During Airway Procedures (AIRWAY Study)

The aerosol box has been used during the management of patients with COVID-19 to reduce health care practitioner (HCP) exposure during aerosol-generating medical procedures (AGMPs). Little is known about the effect of aerosol box use on HCP contamination and AGMP procedure time. To investigate whether use of an aerosol box during AGMPs reduces HCP contamination or influences the time to successful completion and first-pass success rate for endotracheal intubation (ETI) and laryngeal mask airway (LMA) insertion. This multicenter, simulation-based, randomized clinical trial was conducted from May to December 2021 at tertiary care pediatric hospitals. Participant teams performed 3 simulated patient scenarios: bag-valve-mask ventilation, ETI, and LMA insertion. During the scenarios, aerosols were generated using Glo Germ. Teams of 2 HCPs were randomly assigned to control (no aerosol box) or intervention groups (aerosol box). Statistical analysis was performed from July 2022 to February 2023. The aerosol box (or SplashGuard CG) is a transparent, plastic barrier covering the patient's head and shoulders with access ports allowing HCPs to manage the airway. The primary outcome was surface area of contamination (AOC) on participants. Secondary outcomes were time to successful completion and first-pass success rates for ETI and LMA insertion. A total of 64 teams (128 participants) were enrolled, with data from 61 teams (122 participants) analyzed. Among the 122 participants analyzed, 79 (64.8%) were female and 85 (69.7%) were physicians. Use of an aerosol box was associated with a 77.5% overall decreased AOC to the torso (95% CI, -86.3% to -62.9%; P < .001) and a 60.7% overall decreased AOC to the facial area (95% CI, -75.2% to -37.8%; P < .001) in airway HCPs. There was no statistically significant difference in surface contamination after doffing personal protective equipment between groups. Time to completing ETI was longer in the aerosol box group compared with the control group (mean difference: 10.2 seconds; 95% CI, 0.2 to 20.2 seconds; P = .04), but there was no difference between groups for LMA insertion (mean difference: 2.4 seconds; 95% CI, -8.7 to 13.5 seconds; P = .67). In this randomized clinical trial of aerosol box use in AGMPs, use of an aerosol box reduced contamination deposition on HCPs' torso and face predoffing; the use of an aerosol box delayed time to successful intubation. These results suggest that the incremental benefits of reduced surface contamination from aerosol box use should be weighed against delayed time to complete intubation, which may negatively affect patient outcome. ClinicalTrials.gov Identifier: NCT04880668.

A Bifunctional Spray Coating Reduces Contamination on Surfaces by Repelling and Killing Pathogens.

Surface-mediated transmission of pathogens is a major concern with regard to the spread of infectious diseases. Current pathogen prevention methods on surfaces rely on the use of biocides, which aggravate the emergence of antimicrobial resistance and pose harmful health effects. In response, a bifunctional and substrate-independent spray coating is presented herein. The bifunctional coating relies on wrinkled polydimethylsiloxane microparticles, decorated with biocidal gold nanoparticles to induce a "repel and kill" effect against pathogens. Pathogen repellency is provided by the structural hierarchy of the microparticles and their surface chemistry, whereas the kill mechanism is achieved using functionalized gold nanoparticles embedded on the microparticles. Bacterial tests with methicillin-resistant Staphylococcus aureus and Pseudomonas aeruginosa reveal a 99.9% reduction in bacterial load on spray-coated surfaces, while antiviral tests with Phi6─a bacterial virus often used as a surrogate to SARS-CoV-2─demonstrate a 98% reduction in virus load on coated surfaces. The newly developed spray coating is versatile, easily applicable to various surfaces, and effective against various pathogens, making it suitable for reducing surface contamination in frequently touched, heavy traffic, and high-risk surfaces.

Use of Preliminary Exposure Reduction Practices or Laundering to Mitigate Polycyclic Aromatic Hydrocarbon Contamination on Firefighter Personal Protective Equipment Ensembles.

Chronic health risks associated with firefighting continue to be documented and studied, however, the complexity of occupational exposures and the relationship between occupational exposure and contaminated personal protective equipment (PPE) remains unknown. Recent work has revealed that common PPE cleaning practices, which are becoming increasingly more common in the fire service, are not effective in removing certain contaminants, such as polycyclic aromatic hydrocarbons (PAHs), from PPE. To better understand the relationship between contaminated firefighter PPE and potential exposure to PAHs, and to gain further understanding of the efficacy of cleaning practices, we used a standardized fire exposure simulator that created repeatable conditions and measured PPE surface contamination levels via wipe sampling and filters attached to firefighter gear worn by standing mannequins. This study examined the effects of repeated (40 cycles) PPE cleaning (laundering and on-scene preliminary exposure reduction (PER) techniques) and repeated exposures on PAH concentration on different surfaces. Further exploration included examination of contamination breakthrough of turnout jackets (comparing outer shell and interior liner) and evaluation of off-gassing PAHs from used gear after different cleaning treatments. When compared by jacket closure type (zipper and hook and dee), total PAH concentration wiped from gear after exposure and cleanings showed no significant differences. Regression analysis indicated that there was no effect of repeated exposures on PAH contamination levels (all sampling sites combined; before fire 10, 20, and 40; after fire 1, 10, 20, and 40; p-value > 0.05). Both laundering and on-scene PER significantly reduced contamination levels on the exterior pants and helmets and were effective at reducing PAH contamination. The jacket outer shell had significantly higher PAH contamination than the jacket liner. Both laundering and wet soap PER methods (post-fire) are effective in reducing surface contamination and appear to prevent accumulation of contamination after repeated exposures. Semi-volatile PAHs deep within the fibers of bulky PPE are not effectively reduced via PER or machine laundering, therefore, permitting continued off-gassing of these compounds. Further research is needed to identify the most effective laundering methods for firefighter turnout gear that considers the broad spectrum of common contaminants.

Enhancing the electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathodes through amorphous coatings

LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes have attracted the attention of the automotive industry due to their higher capacity and operating voltage. Despite their promising electrochemical behavior, these materials do not have a stable cycling performance, as parasitic reactions take place when they come in contact with the electrolyte. Herein, amorphous Nb2O5 is applied as a multifunctional protective layer to stabilize the NCM811 interface, resulting in reduced surface contamination (Li2CO3), alleviation of transition metal (TM) ion dissolution, and suppression of surface corrosion and phase transformations during cycling. As a result, after 200 cycles, the coated NCM811 had a capacity of 180 mAh g−1 displaying an excellent capacity retention of 85.7%, which is 30% higher than that of the uncoated samples. Similarly, the Nb2O5 coating allows for an enhanced rate capacity of 139 mAh g−1 at 5 C, compared to 117.6 mAh g−1 for the pure NCM811. In addition, the Nb2O5 coating effectively suppresses the voltage decay with cycling, resulting in a voltage decay of 70 mV after 200 cycles, while a reduction of 190 mV takes place without the coating.

MoO3 Nanoparticle Coatings on High-Voltage 5 V LiNi0.5Mn1.5O4 Cathode Materials for Improving Lithium-Ion Battery Performance.

To reduce surface contamination and increase battery life, MoO3 nanoparticles were coated with a high-voltage (5 V) LiNi0.5Mn1.5O4 cathode material by in-situ method during the high-temperature annealing process. To avoid charging by more than 5 V, we also developed a system based on anode-limited full-cell with a negative/positive electrode (N/P) ratio of 0.9. The pristine LiNi0.5Mn1.5O4 was initially prepared by high-energy ball-mill with a solid-state reaction, followed by a precipitation reaction with a molybdenum precursor for the MoO3 coating. The typical structural and electrochemical behaviors of the materials were clearly investigated and reported. The results revealed that a sample of 2 wt.% MoO3-coated LiNi0.5Mn1.5O4 electrode exhibited an optimal electrochemical activity, indicating that the MoO3 nanoparticle coating layers considerably enhanced the high-rate charge–discharge profiles and cycle life performance of LiNi0.5Mn1.5O4 with a negligible capacity decay. The 2 wt.% MoO3-coated LiNi0.5Mn1.5O4 electrode could achieve high specific discharge capacities of 131 and 124 mAh g−1 at the rates of 1 and 10 C, respectively. In particular, the 2 wt.% MoO3-coated LiNi0.5Mn1.5O4 electrode retained its specific capacity (87 mAh g−1) of 80.1% after 500 cycles at a rate of 10 C. The Li4Ti5O12/LiNi0.5Mn1.5O4 full cell based on the electrochemical-cell (EL-cell) configuration was successfully assembled and tested, exhibiting excellent cycling retention of 93.4% at a 1 C rate for 100 cycles. The results suggest that the MoO3 nano-coating layer could effectively reduce side reactions at the interface of the LiNi0.5Mn1.5O4 cathode and the electrolyte, thus improving the electrochemical performance of the battery system.

Additive manufacturing of anti-SARS-CoV-2 Copper-Tungsten-Silver alloy

Purpose The COVID-19 pandemic emphasises the need for antiviral materials that can reduce airborne and surface-based virus transmission. This study aims to propose the use of additive manufacturing (AM) and surrogate modelling for the rapid development and deployment of novel copper-tungsten-silver (Cu-W-Ag) microporous architecture that shows strong antiviral behaviour against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Design/methodology/approach The research combines selective laser melting (SLM), in-situ alloying and surrogate modelling to conceive the antiviral Cu-W-Ag architecture. The approach is shown to be suitable for redistributed manufacturing by representing the pore morphology through a surrogate model that parametrically manipulates the SLM process parameters: hatch distance (h_d), scan speed (S_s) and laser power (L_p). The method drastically simplifies the three-dimensional (3D) printing of microporous materials by requiring only global geometrical dimensions solving current bottlenecks associated with high computed aided design data transfer required for the AM of porous materials. Findings The surrogate model developed in this study achieved an optimum parametric combination that resulted in microporous Cu-W-Ag with average pore sizes of 80 µm. Subsequent antiviral evaluation of the optimum architecture showed 100% viral inactivation within 5 h against a biosafe enveloped ribonucleic acid viral model of SARS-CoV-2. Research limitations/implications The Cu-W-Ag architecture is suitable for redistributed manufacturing and can help reduce surface contamination of SARS-CoV-2. Nevertheless, further optimisation may improve the virus inactivation time. Practical implications The study was extended to demonstrate an open-source 3D printed Cu-W-Ag antiviral mask filter prototype. Social implications The evolving nature of the COVID-19 pandemic brings new and unpredictable challenges where redistributed manufacturing of 3D printed antiviral materials can achieve rapid solutions. Originality/value The papers present for the first time a methodology to digitally conceive and print-on-demand a novel Cu-W-Ag alloy that shows high antiviral behaviour against SARS-CoV-2.

ASSESSING EFFICIENCY OF REMEDIATION IN A RADIOACTIVELY CONTAMINATED TERRITORY BY PLOUGHING SOIL

The paper provides results of assessed remediation efficiency in a radioactively contaminated territory by ploughing soil. Efficiency assessment of three soil cultivation technologies was made. Research has shown efficiency in ploughing soil in terms of reduced surface contamination of the territory. EDR levels and levels of β-particle flux density after reploughing of research spots, on the average, have been reduced by 56% and 87% respectively. Radionuclide transfer from the topsoil to underlying horizons can be observed. Maximum activity concentrations at some research spots can be found in soil layers of 20-25 cm. A change in the soil texture is found at remediated spots and in humus content which may point to both deflationary processes and moving silt fractions and humus into the soil depth under gravity and affected by precipitation. The paper also considers the issue of radionuclide carry-away by plants onto the soil daylight surface and the impact by the type of plant root system on this process; an assessment is given to the effect by remediation technologies selected on the process of remediated spots overgrowing with vegetation. On the whole, it is found that soil ploughing to a depth of 30 cm is the most preferable technology with a backset of 180° followed by sowing with steppe vegetation.

1221. Comparison of the Antimicrobial Efficacy of Mobile Ultraviolet Light Devices in a Simulated Patient Room

BackgroundMultiple mobile ultraviolet (UV) light devices are available for disinfection of hospital rooms, but few data are available on the relative ability of devices to reduce surface contamination and ease of use. The objective of the present study was to compare the antimicrobial efficacy of several devices in a laboratory setting.MethodsUsing a modification of the ASTM International method E2197, spores of Clostridioides difficile(ATCC strain BAA-1870) suspended in phosphate-buffered saline (PBS) with 5% fetal calf serum were inoculated onto 20 mm stainless steel disks and dried. Disks were attached to right and left bedrails, under bed, call button, chair armrest, floor near device, table top, table bottom, floor far from device, toilet seat and grab bar and sink handle in a mock 6.4 × 4.1-meter hospital room with a 1.5 × 2.4-meter bathroom. Disks were exposed using cycle times and device placements recommended by device manufacturers. Spores from exposed disks and unexposed control disks were recovered in PBS with Triton X-100, enumerated using dilution plating, and log10reductions were determined by comparing the number of spores recovered from exposed and control disks. Times for set-up, treatment and resetting the space were recorded for each device. Results were expressed as mean log10reductions and percent reduction/minute of room vacancy. Results were compared using Kruskall-Wallis nonparametric analysis.ResultsMean log10reductions, percent reductions, run times for patient rooms and bathroom, setup/reset times, total room vacancy times, and percent reduction/minute of room vacancy are shown in the Table. There were no significant differences in percent reductions between different locations for each device. There were, however, statistically significant differences between microbial reductions between the different machines (P < 0.05 for all comparisons).ConclusionThere are many factors to consider in selecting a UV device. These considerations should include mean log10reduction, total vacancy times and percent reduction achieved/minute of room vacancy. Disclosures All authors: No reported disclosures.

Cleaning and disinfecting protocols for hospital environmental surfaces: A systematic review of the literature

Background: Healthcare associated infections are a leading cause of illness and death in the United States and across the world. Environmental surfaces are considered non-critical, although recent evidence suggests that the built environment may contribute to the transmission of pathogens. Ineffective cleaning and disinfecting of environmental non-critical surfaces may increase risk of transmitting nosocomial pathogens leading to hospital acquired infections among hospital patients.Objective: This systematic review identifies elements of cleaning and disinfecting protocols, synthesizing the evidence to evaluate cleaning protocols that effectively reduce surface contamination and minimize risk of hospital acquired illness.Methods: A systematic literature review was conducted with a clearly formulated research question and systematic approach to identify publications, select relevant studies, critically appraise the research through analysis of reported data, and reported the results according to the Cochrane methodology.Results: In total, 245 studies were initially identified with 19 studies meeting inclusion criteria. Emerging categories include chemical application methods, chemical application time, cleaning type and frequency, and interventions for training and monitoring.Conclusions: Establishing adequate cleaning protocols for hospital environments is a complex process which requires consideration of multiple components including mechanical action, chemical application materials, types of cleaning, chemical contact times, education and training of EVS staff, cleaning monitoring and feedback, no-contact cleaning methods, and self-disinfecting surfaces. Recommendations for protocol development based on the study results are provided.

Effects of different packaging materials coated with aloe vera extract on the microbial quality of African breadfruit flour (treculia africana) during storage

Antimicrobials in food packaging are used to enhance quality and safety by reducing surface contamination of processed food. This study investigated the effects of Aloe vera-coated packaging materials on the microbial quality characteristics of breadfruit flour. Breadfruit flour was packaged in Jute bag (JB), Cali-co bag (CB), low-density Polyethylenein Brown paper (LDPEBP) and they were compared with control. Samples were analyzed for changes in microbiological(total colony count and total fungal count) and moisture content, stored at an ambient temperature of 25 ± 2 ℃ duringstorage at intervals of 12 weeks. Packaging significantly (p &lt; 0.05) affected the moisture content and microbiologicalof breadfruit flour during storage. The moisture content, total colony count, and total fungi count significantly (p &lt; 0.05)increased as the storage time increased. The sample packaged in Brown paper (BP) were more acceptable than those inother packaging materials.