Reddish-brown Pigment Research Articles

Chemical and physical activation of natural pyrite as potential inorganic pigment material

Pyrite is one of the minerals in Borneo Island. It has a disadvantage for soil quality due to its acidity properties. One of the main components of pyrite is iron, which promises to be utilized as an inorganic pigment. This research aims to transform pyrite into red-brown pigment material-based iron oxide. Pyrite mineral transformation through chemical and physical activation, followed by pigment characterization using XRF, XRD, FTIR, and FE-SEM. Based on the XRF result, the highest component is Fe, with a percentage up to 42%. This data is also suitable with an iron oxide phase from the diffractogram of pigment, followed by silica and alumina structure. The heating process successfully changed the color materials from gold to red-brown. Then, the molecular vibration of Fe–O also appears on FTIR spectra at a wavenumber of 483 cm-1 and T–O–T bending at 994 cm-1. Moreover, morphological observation exhibits the aggregation of particles and distribution of iron element spread on the overall area pigment. The color transformation into red-brown pigment can be obtained by pyrite processing into potential inorganic pigment material.

First Report of Fusarium culmorum Causing Crown Rot on Wheat in Jordan

First Report of <i>Fusarium culmorum</i> Causing Crown Rot on Wheat in Jordan

First Report of Panicle Wilting on Rice (Oryza sativa L.) Caused by Fusarium kyushuense in Heilongjiang Province, China.

Heilongjiang is the largest rice-producing province in China, with annual yield of 28.9 million tons cultivated on 3.8 million hectares (Liu et al. 2021). During field surveys from July to August (2021-2022), symptoms of wilting were observed on rice panicles across Baoqing county (46.32°N, 132.20°E), Shuangyashan city, Heilongjiang province, China. Disease incidence ranged from 10 to 35%, and yield losses were estimated to be 5 to 20% over 7 surveyed fields of 18.5 ha in total. Initially, infected panicles exhibited carmine to brownish spots at the flowering and early grain-filling stages, which gradually merged into large and irregular lesions and spread to the entire panicle surface. Eventually, panicles became wilting and decayed at the ripening stage. To identify the etiological agent, thirty-five symptomatic panicles were collected randomly from 35 plants at different positions in 7 fields. The fragments (approximately 3 mm2) were dissected from margins of individual lesions, surface-disinfested with 70% ethanol for 30 s followed by 2% sodium hypochlorite for 2 min, and rinsed three times in sterilized water. The pieces were then dried and placed onto half-strength potato dextrose agar (PDA) supplemented with 50 μg/mL of streptomycin sulfate. After incubation at 28°C for 4 days, nineteen cultures were obtained and purified using the single-spore isolation method. On PDA plates, the colonies produced fluffy and cottony aerial mycelia and were white to yellowish with deep-yellow to red-brown pigments. The microconidia were hyaline, elliptical or clavate, zero to one septum, measuring 6.3 to 19.2 × 2.6 to 5.1 μm in size (n = 50). On carnation leaf agar (CLA), the macroconidia were thick-walled, falcate to almost straight, three to five septa, apical cell hooked to tapering, basal cell foot-shaped, measuring 27.4 to 47.8 × 3.6 to 5.4 μm in size (n = 50). No chlamydospore was observed. The internal transcribed spacer (ITS) region of ribosomal RNA, translation elongation factor (TEF-1α) gene, and β-tubulin (β-TUB) gene were amplified and sequenced using primers ITS1/ITS4 (White et al. 1990), EF1/EF2 (O'Donnell 2000), and T1/T22 (O'Donnell and Cigelnik 1997) from three representative isolates (PJ58, PJ69 and PJ83), respectively. The obtained sequences were deposited in GenBank (accession nos. ON527509, OQ772202 and OQ777725 for ITS; ON573222, OQ784926 and OQ784927 for TEF-1α; ON573223, OQ784928 and OQ784929 for β-TUB, respectively). BLASTn analysis revealed 99.8 to 100% homology with the corresponding sequences of Fusarium kyushuense (MH892849 for ITS, AB674297 for TEF-1α, and GQ915442 for β-TUB, respectively) in GenBank. Maximum likelihood phylogeny based on the concatenated sequences of ITS, TEF-1α and β-TUB grouped three representative isolates in the F. kyushuense clade. Combined with the morphological and molecular characteristics, the fungus was identified to be F. kyushuense. Pathogenicity of the three isolates of F. kyushuense was evaluated on a susceptible rice cultivar Nanjing 46 at the booting stage. The upper part of a healthy panicle was inoculated by injecting 2 ml of a conidial suspension (1 × 106 spore/ml) obtained from a 7-day-old PDA culture of each isolate. The negative control was treated with sterile distilled water. The experiment was performed thrice with ten replicated plants for each treatment. All plants were placed in a humid chamber at 25°C with a 12-h photoperiod and 80% relative humidity. Twenty days after inoculation, it was found that the inoculated panicles showed typical reddish to brownish lesions, whereas control plants remained symptomless. Pathogens were reisolated from the artificially inoculated panicles and confirmed by morphological and molecular tests, fulfilling Koch's postulates. In recent years, this species has been associated with stalk rot and ear rot of maize (Cao et al. 2021; Wang et al. 2014) and wilt of tobacco (Wang et al. 2013). Also, it was mentioned as a producer of mycotoxins, especially trichothecenes and HT-2 toxin (Varga et al. 2016). To our knowledge, this is the first report of F. kyushuense causing panicle wilting on rice in China. The appropriate control strategies should be made to reduce the risk of disease due to food security concerns and potential threats to rice production.

Study on the Adsorption Behavior of Polymeric Dispersants to S-ZnF Particles during Grinding Process.

Three sodium polyacrylate copolymers PD0x (Poly acrylic acid-co-sodium 4-vinylbenzenesulfonate or PD01; Poly acrylic acid-co-sodium 4-vinylbenzenesulfonate-co-hydroxyethyl methacrylate or PD02 and Poly methyl methacrylate-co-acrylic acid-co-sodium 4-vinylbenzenesulfonate-co-hydroxyethyl methacrylate or PD03) were synthesized as water-based dispersants for grinding red-brown pigment ZnFe1.2Cr0.8O4 particles prepared by the solid phase method (S-ZnF). The particle size distribution, viscosity of suspensions, and adsorption capacity of dispersants were explored by laser particle size analysis, viscometer, and thermogravimetry (TG), respectively. The application of 2 wt.% dispersant PD02 in the S-ZnF suspension ground for 90 min can deliver a finer product with the narrower particle size distribution. The added dispersant PD02 in the grinding process of the S-ZnF particles exhibits a suitable viscosity of the suspension and generates more hydrogen bonds on the S-ZnF particle surface. The sulfonic acid groups (SO3-) and carboxylic acid groups (-COO-) in the dispersant PD02 can also provide a strong charge density, which is favorable for the dispersion and grinding of the S-ZnF particles in the suspensions. Furthermore, the adsorption behavior of polymeric dispersant PD02 adsorbed on the S-ZnF particles surface was simulated and analyzed by adsorption thermodynamic models and adsorption kinetic models. It is indicated that the adsorption thermodynamic behavior of dispersant PD02 adsorbed on the S-ZnF particles surface follows the Langmuir model, and the adsorption process is endothermic and a random process with increased confusion during the grinding process. In addition, the adsorption kinetics of dispersant PD02 adsorbed on the S-ZnF particles surface are more in line with the pseudo-first-order kinetic models. Therefore, the adsorption process of dispersant PD02 on the S-ZnF particles surface can be considered as a single-surface adsorption process.

First Report of Stemphylium lycopersici Causing Leaf Spot on Hevea brasiliensis in China.

Hevea brasiliensis is widely planted in tropical and subtropical regions and is the main source of natural rubber production. The growth of rubber trees is plagued by various leaf diseases, resulting in decreased rubber production. From January to March in 2020, a severe leaf spots disease on Hevea brasiliensis found in Agricultural Science Base in Haidian campus of Hainan University (20° 03' 31″ N, 110° 19' 07″ E), Haikou, Hainan province, China. Spots were only observed on the mature green rather than young and bronze-colored leaves. This symptom has never been reported on the leaves of Hevea brasiliensis. During the early stages of the disease, gray leaf spots were concentrated to the leaf margins, but later expanded forming irregular gray lesions with chlorotic edges (Figure 1A). Eventually, lesions became necrotic shot holed, and leaves curled, wilted, and dropped. Five small pieces were cut from the margin of spots from different infected leaves, and were surface disinfected with 75% alcohol three times for five seconds each time and 1% sodium hypochlorite solution (NaClO) for 60 s. After washing twice with sterile water, leaf pieces were placed in the center of plates with Potato Dextrose Agar (PDA) medium and incubated for one week at 28 °C. After 7 days, mycelium developed and colonies were single-spore cultured for further study. One of the strains labeled HN01 developed a yellowish-brown to reddish-brown pigment on PDA, and the colonies were gray and cottony. The colony and pigment feature very consistent with Stemphylium sp. (Figure 2) (Li et al. 2017). Conidiophore were solitary, transparent to pale, mostly 102.1-228.8 µm × 4.0-5.8 µm, with 2-3 septa and apical vesicular swellings 6.5-7.9 µm. The dimensions of conidia were 28.3-45.1 × 11.5-17.5 µm and one septum (Figure 3). Conidia of S. lycopersici were solitary, oblong with a conical end at the apex, with 1-2 septa, and constricted at the transverse septum. The internal transcribed spacer region of rDNA was amplified with primers ITS1/ITS4 (5'-TCCGTAGGTGAACCTGCGG-3'/5'-TCCTCCGCTTATTGATATGC-3'), glyceraldehyde-3-phosphate dehydrogenase (gpd) was amplified with primers GPD-F/R (5'-GCACCGACCACAAAAATC-3'/ 5'-GGGCCGTCAACGACCTTC-3'), calmodulin region (cmdA) was amplified with the primers CALDF1/CALDR2 (5'-AGCAAGTCTCCGAGTTCAAGG-3'/5'-CTTCTGCATCATCAYCTGGACG3') from genomic DNA of strain HN01 (Xie et al. 2018), and PCR products were sequenced. The ITS sequence of strain HN01 (GenBank Accession No. MZ496930) had 99.64% identity with isolates sl001, sl110, sl111, and sl112 of Stemphylium lycopersici (GenBank Accession No. KX858848.1, MF480547.1, MF480548.1, MF480549.1). Similarly GPD sequences (GenBank Accession No. MZ505106) had 100% identity with strain xiqing, HZ2114 and HZ2115 of Stemphylium lycopersici (GenBank Accession No. KR911809.1, KR911810.1, KT957742.1 and KT957743.1), and CMDA sequences (GenBank Accession No. MZ505105) had 99.85% identity with Stemphylium lycopersici strain LJ1609270201 (GenBank Accession No. MG742412.1). A phylogenetic analysis constructed by MEGA6.0 based on concatenated sequences of the HN01 and another 17 strains from GenBank by using the maximum-likelihood (ML) method showed that the HN01 was clustered and matched with Stemphylium lycopersici LJ1609270201 (Figure 4). To satisfy Koch's postulates, we inoculated mature green leaves of Hevea brasiliensis with mycelial plugs (diameter = 5 mm) of pure cultured strain HN01. All leaves of Hevea brasiliensis were wrapped in a freezer bag to maintain relative humidity >85%, and the temperature of greenhouse is 28ºC. The disease developed on the inoculated leaves after 2-3 days, but not on control leaves (Figure 1B). We used the same method as before to re-isolate the pathogen, which had the same morphology and genotypes as the original isolate. S. lycopersici has been reported to infect the leaves of a variety of plants, including pepper, tomato, eggplant, watermelon, Physalis alkekengi. (Yang et al.2017; Ben et al. 2017; Yang et al. 2020). To our knowledge, this is the first record of S. lycopersici causing leaf spot of Hevea brasiliensis in China, and Hevea brasiliensis is the global new host of S. lycopersici. Hevea brasiliensis is the main source of natural rubber and is widely planted in southern China. Therefore, it is imperative to implement disease management measures to prevent potential threats.

Comparative Molecular Mechanisms of Biosynthesis of Naringenin and Related Chalcones in Actinobacteria and Plants: Relevance for the Obtention of Potent Bioactive Metabolites.

Naringenin and its glycosylated derivative naringin are flavonoids that are synthesized by the phenylpropanoid pathway in plants. We found that naringenin is also formed by the actinobacterium Streptomyces clavuligerus, a well-known microorganism used to industrially produce clavulanic acid. The production of naringenin in S. clavuligerus involves a chalcone synthase that uses p-coumaric as a starter unit and a P450 monoxygenase, encoded by two adjacent genes (ncs-ncyP). The p-coumaric acid starter unit is formed by a tyrosine ammonia lyase encoded by an unlinked, tal, gene. Deletion and complementation studies demonstrate that these three genes are required for biosynthesis of naringenin in S. clavuligerus. Other actinobacteria chalcone synthases use caffeic acid, ferulic acid, sinapic acid or benzoic acid as starter units in the formation of different antibiotics and antitumor agents. The biosynthesis of naringenin is restricted to a few Streptomycess species and the encoding gene cluster is present also in some Saccharotrix and Kitasatospora species. Phylogenetic comparison of S. clavuligerus naringenin chalcone synthase with homologous proteins of other actinobacteria reveal that this protein is closely related to chalcone synthases that use malonyl-CoA as a starter unit for the formation of red-brown pigment. The function of the core enzymes in the pathway, such as the chalcone synthase and the tyrosine ammonia lyase, is conserved in plants and actinobacteria. However, S. clavuligerus use a P450 monooxygenase proposed to complete the cyclization step of the naringenin chalcone, whereas this reaction in plants is performed by a chalcone isomerase. Comparison of the plant and S. clavuligerus chalcone synthases indicates that they have not been transmitted between these organisms by a recent horizontal gene transfer phenomenon. We provide a comprehensive view of the molecular genetics and biochemistry of chalcone synthases and their impact on the development of antibacterial and antitumor compounds. These advances allow new bioactive compounds to be obtained using combinatorial strategies. In addition, processes of heterologous expression and bioconversion for the production of naringenin and naringenin-derived compounds in yeasts are described.

Synthesis and characterisation of cerium doped bismuth titanate proficient UV shielding and NIR reflective reddish brown pigment by citrate autocombustion synthesis

A new series of Bi4-xCexTi3O12 (0.25, 0.50, 0.75, 1.0, 1.25)] reddish brown to dark yellow NIR reflectance pigments with UV shielding properties have been synthesised via citrate auto combustion synthesis. The doping of Ce ions tunes the colour of the bismuth titanate from ivory to reddish brown. The reddish brown Bi3.75Ce0.25Ti3O12 pigment shows NIR reflectance of around 71.79%. All the synthesized pigments shows equally proficient UV absorbance value 1.271 at 274 nm. The increasing Ce ion concentration changes the colour from darker to lighter reddish shades. This reddish brown pigment was used in thermosetting acrylic resin paint and the ability of its heat resistance was analysed. The higher thermal stability and desirable optical properties of the synthesised pigments enables them as cost effective, environmental friendly NIR reflective reddish brown cool pigments and good alternative to the toxic pigments of the same colour.

Trichoscopic Signs in Dermatomyositis, Systemic Lupus Erythematosus, and Systemic Sclerosis: A Comparative Study of 150 Patients

Background: Hair and scalp involvement is prevalent in connective tissue diseases (CTDs). Trichoscopic features may provide a diagnostic implementation and enable differentiation among CTDs; however, a direct comparison of these signs among CTD patients is lacking. Objectives: To compare trichoscopic findings in dermatomyositis (DM), systemic lupus erythematosus (SLE), and systemic sclerosis (SSc) as well as determine their distinctive features and associations with disease activity. Methods: Trichoscopic photographs were taken from DM, SLE, and SSc patients and further evaluated for hair shaft and scalp surface abnormalities. Data regarding patients’ clinical manifestations, laboratory results, and disease activity were analyzed. Results: One hundred fifty participants, consisting of 30 DM, 60 SLE, and 60 SSc patients, were included. Perifollicular red-brown pigmentation, brown scattered pigmentation, and white patches were exclusive findings in DM, SLE, and SSc, respectively (p < 0.001). A multinomial logistic regression analysis revealed that DM demonstrated higher odds for having microaneurysmal blood vessels than SLE and SSc (odds ratio [OR] = 22.22, 95% confidence interval [CI] = 1.73–285.13, p = 0.017, and OR = 15.34, 95% CI = 1.36–177.59, p = 0.029, respectively). Polymorphic vessels forming a telangiectatic network suggested SSc over SLE (OR = 12.83, 95% CI = 1.35–121.98, p = 0.026), while avascular areas were more pronounced in SSc than DM and SLE (OR = 43.24, 95% CI = 5.17–361.67, p = 0.001, and OR = 0.03, 95% CI = 0.01–0.24, p = 0.001, respectively). In a quantile regression analysis, perifollicular red-brown pigmentation, reduction in hair diameter, and the absence of thin arborizing vessels were linked to higher disease activity in DM, SLE, and SSc, respectively (all p < 0.05). Conclusions: Trichoscopy is a valuable tool possessing diagnostic and prognostic values for CTDs. Specific trichoscopic features allow adequate distinction between DM, SLE, and SSc and may help identify active disease.

Molecular Markers for Detecting a Wide Range of Trichoderma spp. that Might Potentially Cause Green Mold in Pleurotus eryngii

In Pleurotus sp., green mold, which is considered a major epidemic, is caused by several Trichoderma species. To develop a rapid molecular marker specific for Trichoderma spp. that potentially cause green mold, eleven Trichoderma species were collected from mushroom farms and the Korean Agricultural Culture Collection (KACC). A dominant fungal isolate from a green mold-infected substrate was identified as Trichoderma pleuroticola based on the sequences of its internal transcribed spacer (ITS) and translation elongation factor 1-α (tef1) genes. In artificial inoculation tests, all Trichoderma spp., including T. atroviride, T. cf. virens, T. citrinoviride, T. harzianum, T. koningii, T. longibrachiatum, T. pleurotum, and T. pleuroticola, showed pathogenicity to some extent, and the observed symptoms were soaked mycelia with a red-brown pigment and retarded mycelium regeneration. A molecular marker was developed for the rapid detection of wide range of Trichoderma spp. based on the DNA sequence alignment of the ITS1 and ITS2 regions of Trichoderma spp. The developed primer set detected only Trichoderma spp., and no cross reactivity with edible mushrooms was observed. The detection limits for the PCR assay of T. harzianum (KACC40558), T. pleurotum (KACC44537), and T. pleuroticola (CAF-TP3) were found to be 500, 50, and 5 fg, respectively, and the detection limit for the pathogen-to-host ratio was approximately 1:10,000 (wt/wt).

Cryovolcanic flooding in Viking Terra on Pluto

A prominent fossa trough (Uncama Fossa) and adjacent 28-km diameter impact crater (Hardie) in Pluto's Viking Terra, as seen in the high-resolution images from the New Horizons spacecraft, show morphological evidence of in-filling with a material of uniform texture and red-brown color. A linear fissure parallel to the trough may be the source of a fountaining event yielding a cryoclastic deposit having the same composition and color properties as is found in the trough and crater. Spectral maps of this region with the New Horizons LEISA instrument reveal the spectral signature of H2O ice in these structures and in distributed patches in the adjacent terrain in Viking Terra. A detailed statistical analysis of the spectral maps shows that the colored H2O ice filling material also carries the 2.2-μm signature of an ammoniated component that may be an ammonia hydrate (NH3·nH2O) or an ammoniated salt. This paper advances the view that the crater and fossa trough have been flooded by a cryolava debouched from Pluto's interior along fault lines in the trough and in the floor of the impact crater. The now frozen cryolava consisted of liquid H2O infused with the red-brown pigment presumed to be a tholin, and one or more ammoniated compounds. Although the abundances of the pigment and ammoniated compounds entrained in, or possibly covering, the H2O ice are unknown, the strong spectral bands of the H2O ice are clearly visible. In consideration of the factors in Pluto's space environment that are known to destroy ammonia and ammonia-water mixtures, the age of the exposure is of order ≤109 years. Ammoniated salts may be more robust, and laboratory investigations of these compounds are needed.

Phlobaphenes modify pericarp thickness in maize and accumulation of the fumonisin mycotoxins

Phlobaphenes are insoluble phenolic compounds which are accumulated in a limited number of tissues such as seed pericarp and cob glumes, conferring on them a typical red-brown pigmentation. These secondary metabolites, derived from 3-deoxy flavonoids, are thought to have an important role in plants’ resistance against various pathogens, e.g. by reducing fungal infection, and also to have beneficial effects on human and animal health due to their high antioxidant power. The aim of this work was to determine the role of phlobaphenes in reducing mycotoxin contamination on maize kernels. We analysed the effect of the P1 (pericarp color 1) gene on phlobaphenes accumulation, pericarp thickness and fumonisins accumulation. Analysing fumonisins accumulation in different genetic backgrounds through three seasons, we found a clear decrease of these toxins through the three years (Wilcoxon test, Z = 2.2, p = 0.0277) in coloured lines compared with the isogenic non-coloured ones. The coloured lines, carrying P1 allele showed an increase of phlobaphenes (about 10–14 fold) with respect to colourless lines. Furthermore there was a correlation between phlobaphenes accumulation and pericarp thickness (R = 0.9318; p = 0.0067). Taken together, these results suggest that the P1 gene plays a central role in regulating phlobaphenes accumulation in maize kernels, and indirectly, also tackles mycotoxins accumulation. The development and cultivation of corn varieties rich in phlobaphenes could be a powerful tool to reduce the loss of both quality and yield due to mycotoxin contamination, increasing the safety and the quality of the maize product.

Pyomelanin biosynthetic pathway in pigment-producer strains from the pandemic Acinetobacter baumannii IC-5.

BACKGROUND Acinetobacter baumannii outbreaks have been associated with pandemic International Clones (ICs), but the virulence factors involved with their pathogenicity are sparsely understood. Pigment production has been linked with bacterial pathogenicity, however, this phenotype is rarely observed in A. baumannii.OBJECTIVES This study aimed to characterise the reddish-brown pigment produced by A. baumannii strains, and to determine its biosynthetic pathway by genomic approaches.METHODS Pigment characterisation and antimicrobial susceptibility were conducted by phenotypic tests. The clonal relationship was obtained by pulsed field gel electrophoresis (PFGE) and multi-locus sequence typing (MLST). The genome of an A. baumannii was obtained for characterisation of genes involved with pigment production.FINDINGS The pyomelanin was the pigment produced by A. baumannii. Strains were extensively drug resistant and belonged to the IC-5/ST79. The pyomelanin biosynthetic pathway was determined and presented a particular architecture concerning the peripheral (tyrB, phhB and hpd) and central (hmgB, hmgC and hmgR) metabolic pathway genes. The identification of a distant HmgA homologue, probably without dioxygenase activity, could explain pyomelanin production. Virulence determinants involved with adherence (csuA/BABCDE and a T5bSS-carrying genomic island), and iron uptake (basABCDEFGHIJ, bauABCDEF and barAB) were characterised.MAIN CONCLUSION There is a biosynthetic pathway compatible with the pyomelanin production observed in persistent A. baumannii IC-5 strains.

Bacterial melanin production by heterologous expression of 4‑hydroxyphenylpyruvate dioxygenase from Pseudomonas aeruginosa.

Pyomelanin is a reddish-brown pigment produced by bacteria of different genera and plays a variety of physiological roles. Proposals have been regarding the use of pyomelanin in various environmental, industrial and, more recently, cosmetic applications. In Pseudomonas aeruginosa, the enzyme 4‑hydroxyphenylpiruvate dioxygenase (Hpd) converts 4-hydroxyphenylpiruvate into homogentisic acid, which represents the key intermediate for melanin biosynthesis. This work aimed to obtain Escherichia coli cells overexpressing hpd gene from the PAO1 strain to produce large amounts of pyomelanin for biotechnological purposes. The recombinant dioxygenase expression gave E. coli JM109 the ability to produce pyomelanin. A series of biotransformations led us to choose the best experimental conditions for pyomelanin production. Cells were grown at the mid-exponential phase in a mineral medium with added glucose 10 mM as carbon and energy sources and casamino acid 0.2% w/v as an amino acid source. The administration of tyrosine 1 mM after 30 min of exposure to arabinose 1% w/v made it possible to purify 213 mg/L of pyomelanin after 6 days of biotransformation. In addition to the interesting biotechnological outcomes, the resulting expression system supports the correlation between the hpd gene from P. aeruginosa PAO1 and pyomelanin synthesis.

Galbinothrix, a new monotypic genus of Chrysotrichaceae (Arthoniomycetes) lacking pulvinic acid derivatives

AbstractGalbinothrix caesiopruinosa is described from Japan and Korea. The new genus and species is placed in Chrysotrichaceae by its ascoma morphology and by a phylogenetic analysis of mtSSU and nLSU sequence data using Bayesian and maximum likelihood inference. The monotypic genus Galbinothrix is superficially similar to Chrysothrix caesia in having dark brown ascomata covered by a thin bluish grey pruina, reddish brown ascomatal pigment in the epithecium and proper exciple, the greyish green to yellowish olive thallus, and usnic acid as the main secondary thallus compound. It differs from this species and all other Chrysotrichaceae by its large, oblong, thick-walled ascospores with a distinct epispore, the narrowly clavate to almost tubular asci, and the never clearly granular to leprose thallus.

Flavonoid compounds related to seed coat color of wheat

In red wheat, reddish-brown pigments accumulate in testa of mature seeds. Half-cut wheat seeds were immersed in p-dimethylaminocinnamaldehyde (DMACA) reagent that stains flavanol structures blue. Testa of 10-40days after flowering (DAF) in red wheat ("Norin 61" and "Satonosora") seeds were stained blue and the reagent color changed to blue with 10-25 DAF seeds. No blue staining was observed in white wheat ("Tamaizumi") seeds during maturation. "Norin 61" seed coats at 10 DAF contained dihydroquercetin, dihydromyricetin, (+)-catechin, procyanidin B3, and prodelphinidin B3, which were identified by HPLC-diode array detector and LC-MS/MS analyses. These five components began accumulating 7 DAF, reached maxima at 10 or 15 DAF, and then decreased in red wheat seeds, but were not detected in white wheat seeds. These results suggest that flavanol and proanthocyanidins are possible precursors of the reddish-brown pigments of red wheat seeds, and are converted to insoluble compounds as the seeds mature.

Characterization of 2-(2-nitro-4-trifluoromethylbenzoyl)-1,3-cyclohexanedione resistance in pyomelanogenic Pseudomonas aeruginosa DKN343.

Pyomelanin is a reddish-brown pigment that provides bacteria and fungi protection from oxidative stress, and is reported to contribute to infection persistence. Production of this pigment can be inhibited by the anti-virulence agent 2-(2-nitro-4-trifluoromethylbenzoyl)-1,3-cyclohexanedione (NTBC). The Pseudomonas aeruginosa clinical isolate DKN343 exhibited high levels of resistance to NTBC, and the mechanism of pyomelanin production in this strain was uncharacterized. We determined that pyomelanin production in the clinical Pseudomonas aeruginosa isolate DKN343 was due to a loss of function in homogentisate 1,2-dioxygenase (HmgA). Several potential resistance mechanisms were investigated, and the MexAB-OprM efflux pump is required for resistance to NTBC. DKN343 has a frameshift mutation in NalC, which is a known indirect repressor of the mexAB-oprM operon. This frameshift mutation may contribute to the increased resistance of DKN343 to NTBC. Additional studies investigating the prevalence of resistance in pyomelanogenic microbes are necessary to determine the future applications of NTBC as an anti-virulence therapy.

Synthesis and characterisation of SrY2−xCexO4 as environmentally friendly reddish-brown pigments

SrY2−xCexO4 solid solutions were synthesized as environmentally-friendly inorganic pigments and the color gradually changed from yellow to reddish brown on increasing the Ce3+ concentration.

Exploring the microbiota of the red-brown defect in smear-ripened cheese by 454-pyrosequencing and its prevention using different cleaning systems

Red-brown pigmentation can occasionally form in smeared-ripened cheese such as Fontina during the ripening process. This reaction is due to over-development of the typical microbiota present on the rind. Previous studies have demonstrated the relationship between red-brown pigmentation and the traditional utilization of wooden shelves during cheese ripening. The first part of the paper focuses on the characterisation of yeast and bacterial microbiota: plate counts and 454-pyrosequencing were performed in spoiled (n = 6) and non-spoiled cheeses (n = 6) and on the wooden shelves used during ripening. The second part shows different systems tested for cleaning the wooden shelves and avoiding the development of the red-brown defect in cheese: washing with hot water and ozone treatment. Actinobacteria, dominated on the wooden shelves, suggesting to be responsible for the red-brown pigmentation; they were also found in traces in the defected cheese samples. Galactomyces and Debaryomyces were the main species characterizing the yeast population, with Debaryomyces being the most dominant species on the shelves used during ripening of the red-brown defective cheese. Hot water treatment reduced the microbial contamination of shelves, whereas only the ozone treatment ensured complete elimination of both yeast and bacteria, resulting in the cheese rind not having the red-brown defect.

Acute and 28-Day Subacute Toxicity Studies of Hexane Extracts of the Roots of Lithospermum erythrorhizon in Sprague-Dawley Rats.

Lithospermum erythrorhizon has long been used as a traditional oriental medicine. In this study, the acute and 28-day subacute oral dose toxicity studies of hexane extracts of the roots of L. erythrorhizon (LEH) were performed in Sprague-Dawley rats. In the acute toxicity study, LEH was administered once orally to 5 male and 5 female rats at dose levels of 500, 1,000, and 2,000 mg/kg. Mortality, clinical signs, and body weight changes were monitored for 14 days. Salivation, soft stool, soiled perineal region, compound-colored stool, chromaturia and a decrease in body weight were observed in the extract-treated groups, and no deaths occurred during the study. Therefore, the approximate lethal dose (ALD) of LEH in male and female rats was higher than 2,000 mg/kg. In the subacute toxicity study, LEH was administered orally to male and female rats for 28 days at dose levels of 25, 100, and 400 mg/kg/day. There was no LEH-related toxic effect in the body weight, food consumption, ophthalmology, hematology, clinical chemistry and organ weights. Compound-colored (black) stool, chromaturia and increased protein, ketone bodies, bilirubin and occult blood in urine were observed in the male and female rats treated with the test substance. In addition, the necropsy revealed dark red discoloration of the kidneys, and the histopathological examination showed presence of red brown pigment or increased hyaline droplets in the renal tubules of the renal cortex. However, there were no test substance-related toxic effects in the hematology and clinical chemistry, and no morphological changes were observed in the histopathological examination of the kidneys. Therefore, it was determined that there was no significant toxicity because the changes observed were caused by the intrinsic color of the test substance. These results suggest that the no-observed-adverse-effect Level (NOAEL) of LEH is greater than 400 mg/kg/day in both sexes.

Methods to Inhibit Bacterial Pyomelanin Production and Determine the Corresponding Increase in Sensitivity to Oxidative Stress

Pyomelanin is an extracellular red-brown pigment produced by several bacterial and fungal species. This pigment is derived from the tyrosine catabolism pathway and contributes to increased oxidative stress resistance. Pyomelanin production in Pseudomonas aeruginosa is reduced in a dose dependent manner through treatment with 2-[2-nitro-4-(trifluoromethyl)benzoyl]-1,3-cyclohexanedione (NTBC). We describe a titration method using multiple concentrations of NTBC to determine the concentration of drug that will reduce or abolish pyomelanin production in bacteria. The titration method has an easily quantifiable outcome, a visible reduction in pigment production with increasing drug concentrations. We also describe a microtiter plate method to assay antibiotic minimum inhibitory concentration (MIC) in bacteria. This method uses a minimum of resources and can easily be scaled up to test multiple antibiotics in one microtiter plate for one strain of bacteria. The MIC assay can be adapted to test the affects of non-antibiotic compounds on bacterial growth at specific concentrations. Finally, we describe a method for testing bacterial sensitivity to oxidative stress by incorporating H2O2 into agar plates and spotting multiple dilutions of bacteria onto the plates. Sensitivity to oxidative stress is indicated by reductions in colony number and size for the different dilutions on plates containing H2O2 compared to a no H2O2 control. The oxidative stress spot plate assay uses a minimum of resources and low concentrations of H2O2. Importantly, it also has good reproducibility. This spot plate assay could be adapted to test bacterial sensitivity to various compounds by incorporating the compounds in agar plates and characterizing the resulting bacterial growth.