Red-shifted Spectra Research Articles

On-chip warped three-dimensional InGaN/GaN quantum well diode with transceiver coexistence characters

Featured with light emission and detection coexistence phenomenon, nitride-based multiple-quantum-well (MQW) diodes integrated chip has been proven to be an attractive structure for application prospects in various fields such as lighting, sensing, optical communication, and other fields. However, most of the recent reports are based on planar structures. Three-dimensional (3D) structures offer extra advantages in direction and polarization and absorption modulation and may start a new way to make the same thing over and over with interesting properties. In this paper, we designed and fabricated a single-cantilever InGaN/GaN MQW diode with warped 3D microstructure via standard microfabrication technology. Experimental results indicate that the strain architecture of the multi-layer materials is the key principle for the self-warped device. The planar structure will bear greater compressive stress while the warped beam part has less stress, resulting in differences in the optical and electrical performance. The strain-induced band bending highly influences the emission and detection properties, while the warped structure will introduce direction selectivity to the 3D device. As an emitter, 3D structures have a directional emission with lower turn-on voltage, higher capacitance, increased luminous intensity, higher external quantum efficiency (EQE), high -3dB bandwidth, and redshifted peak wavelength. Besides, it can serve as an emitter for directional-related optical communication. As a receiver, 3D structures have lower dark-current, higher photocurrent, and red-shifted response spectrum and also show directional dependence. These findings not only deepen the understanding of the working principle of the single-cantilever GaN devices but also provide important references for device performance optimization and new applications in visible light communication (VLC) technology.

Non-alternant Benzodifluoranthene Tetraimides from 7,8,9,10-Fluoranthene Diimides: Synthesis, Structure, and Optical-Limiting Properties.

A novel tetraimide-functionalized non-alternant π-conjugated system, namely, benzodifluoranthene tetraimides (BDFTI), has been designed and synthesized through highly efficient UV-photocyclization of a vinyl-bridged fluoranthene diimide dimer (i.e., FDI-V). The synthesis of FDI-V starts from a straightforward three-step route to produce novel 7,8,9,10-fluoranthene diimide (FDIs) building-blocks, followed by nearly complete bromination and then Stille-coupling reaction to give the desired dimer. The analysis by X-ray crystallography confirms a near-coplanar geometry for FDIs, while BDFTI shows a U-shaped and distorted backbone configuration proven by theoretical optimizations. The tetraimide BDFTI exhibits several advantages over the FDI cores, including an extended absorption band and a red-shift in photoluminescence spectra. This enhancement can be attributed to the presence of additional electron-deficient imide units, which promotes increased intramolecular charge transfer and improved electron affinity. All the imides show a local aromatic characteristic owing to the incorporation of pentagon rings in the π-frameworks. The fully fused BDFTI exhibits nonlinear optical properties as analyzed by the open-aperture Z-scan technique, demonstrating superior optical-limiting performance compared to vinyl-bridged FDI-V. The versatile UV-photocyclization chemistries provide a pathway for developing complex and unique multiimide-functionalized π-conjugated systems, paving the way for creating high-performance optical-limiting materials.

C3-symmetric triarylboron building blocks: Synthesis, structures, and photophysical properties

Synthesis of C3-symmetric triarylboranes, tris(4-bromo-2,6-dimethylphenyl)-borane (1), N,N',N''-(boranetriyltris(3,5-diisopropyl-3′,5′-dimethyl-[1,1′-biphenyl]-4′,4-diyl))tris(1,1-diphenylmethanimine) (2), N,N',N''-(boranetriyltris(3′,5′-dimethyl-[1,1′-biphenyl]-4′,4-diyl))tris-(1,1-diphenylmethanimine) (3), 4′,4′'',4′''''-boranetriyltris(3′,5′-dimethyl-[1,1′-biphenyl]-4-carbaldehyde) (4), 4,4′,4′'-boranetriyltris(3,5-dimethylaniline) (5), 4′,4′'',4′''''-borane-triyltris(3′,5′-dimethyl-[1,1′-biphenyl]-4-carbonitrile) (6), 4′,4′'',4′''''-boranetriyltris(3′,5′-dimethyl-[1,1′-biphenyl]-4-amine) (7), and 4,4′,4′'-boranetriyltris(3,5-dimethylbenzaldehyde) (8) has been accomplished using well-known synthetic methodologies. These new potential building blocks have been characterized by various spectroscopic and analytical techniques and their photophysical properties have been examined. It is observed that photophysical properties of these compounds are enhanced with π conjugation expansions along the branches when donor moieties such as -NH2 groups are present at the para-position of the aryl rings. The highest quantum yield of 0.293 is observed for 4′,4′'',4′''''-boranetriyltris(3′,5′-dimethyl-[1,1′-biphenyl]-4-amine) (7). Interestingly, red-shifted fluorescence spectra follow the same trend as absorption spectra. The fluorescence lifetime increases with the number of donor moieties. The present findings demonstrate the possible use of these C3-symmetric boron-containing building blocks in developing new polymeric materials with improved photophysical properties for various applications.

Structural Modeling of Fluorinated Quinoxaline Core–Based Chromophores for Efficient Photovoltaic Materials: A DFT Study

ABSTRACTHerein, a series of fluorinated quinoxaline core–based chromophores (MTH1‐MTH6) with A1–π–A2–π–A1 configuration was designed by structural modulation of end‐capped acceptors in MTHR. The quantum chemical calculations were accomplished at MPW1PW91/6‐311G(d,p) functional to explore optoelectronic and photovoltaic properties of these designed compounds. The findings revealed that all the derivatives exhibited narrow band gap (Egap = 2.163–2.666 eV) with red shift spectra (610.24–766.944 eV in chloroform) as compared with MTHR. The designed compounds exhibited comparable open‐circuit voltage (Voc) and higher power conversion efficiencies (PCEs) as compared with the MTHR. Among the entitled chromophores, MTH1 was found to be a promising chromophore for organic solar cells (OSCs) owning to its lowest Egap (2.163 eV) with highest absorption peak (766.944 nm in chloroform and 717.709 nm in gaseous phase). The aforementioned findings indicate that molecular engineering of chromophores with extended acceptors enhances photovoltaic response, and this motivates researchers to develop highly effective photovoltaic devices.

Estimation of Electric Dipole Moment by Solvatochromism, Computational Method, and Study of the Effect of Solvents by Preferential Solvation of 6 - Methoxy-4-(4-Nitro-Phenoxy Methyl)-Chromen-2-One (6mnpm).

At room temperature, the absorption and fluorescence properties of coumarin 6-Methoxy-4-(4-nitro-phenoxy methyl)-chromen-2-one (6MNPM) are investigated in pure organic solvents and a combination of acetonitrile (ACN) and tetrahydrofuran (THF). The pure solvents' influence on spectral characteristics is examined by applying theories such as Kamlet and Catalan's multiple linear regression techniques, Reichardt's microscopic solvent polarity parameter, and the Lippert-Mataga polarity function. The significant role of solute-solvent interactions in pure solvents, particularly dielectric interaction and hydrogen bonding. However, hydrogen bonding interactions dominate the contribution of dielectric interactions. The electric dipole moments of both the ground as well as excited states had been calculated using the Solvatochromic method. The value of the excited state electric dipole moment and the redshifts of the emission spectra show that the emitting singlet state has an intramolecular charge transfer (ICT) character. From Catalan's linear regression, we found that di-polarity has a much smaller influence than polarizability. By solvation study, we conclude that Tetrahydrofuran solvent is preferred over Acetonitrile.

Molecular design and characterization of the PANI/yttrium oxide multifunctional nanocomposite material

A detailed density functional theory study was conducted on the nanocomposites formed by polyaniline and yttrium oxide clusters, employing the mixed 6-311G(d,p)/LANL2DZ basis set. The investigation identified the formation of the nanocomposites through strong covalent bonding and moderate electrostatic interactions, resulting in significant binding energies. These interactions contributed to a reduction in the band gap, increased electron activity, and higher chemical reactivity compared to pure polyaniline. The formation of the nanocomposites induced a redshift in the UV-vis absorption spectra, moving the maximum absorption wavelength from the ultraviolet to the visible region, indicating n-type doping. Natural bond orbital analysis confirmed the role of yttrium oxide clusters as electron acceptors, with polyaniline serving as an electron donor.

Coumarin-Derived Caging Groups in the Spotlight: Tailoring Physiochemical and Photophysical Properties.

The development of light-responsive molecular tools enables spatiotemporal control of biochemical processes with superior precision. Amongst these molecular tools, photolabile caging groups are employed to prevent critical binding interactions between a bioactive molecule and its corresponding target. Only upon irradiation with light, the bioactive is released in its 'active' form and is now readily available to bind to its target. Coumarin-derived caging groups constitute one of the most popular classes of photolabile protecting groups, due to their facile synthetic accessibility, ease of tuning photophysical properties via structural modification and rapid photolysis reactions. Herein, we highlight the recent progress made on the development of coumarin-derived caging groups, in which the red-shifting of absorption spectra, improving aqueous solubility and tailoring sub-cellular localisation has been of particular interest.

Asymmetric main-chain twisted small molecules for efficient polymer solar cells

Polymer solar cells (PSCs) based on small molecules with twisted backbones as electron acceptors, have many advantages over their planar counterparts, such as upshifted molecular energy levels, better charge extraction performance, enhanced extinction coefficient, extended carrier lifetime and reduced recombination rate, which are very helpful in improving the power conversion efficiencies (PCE). The present study was designed to synthesize two new small molecules with main-chain twisted structures that include an asymmetric electron donor core thiophene-phenylene-thieno[3,2-b]thiophene, namely i-T-TT and i-T-TT-4F, to investigate the “structure-property” correlation of main-chain twisted acceptors. Both asymmetric molecules exhibit bent geometric structures, and the fluorinated acceptor i-T-TT-4F possesses a more red-shifted spectrum, improved molar extinction coefficient, and deepened molecular energy levels. As a result, when combined with the middle bandgap polymer donor J52, there was a remarkable efficiency of 12.22 % for the device of i-T-TT-4F, higher than that of i-T-TT (9.51 %). Our research illustrates the importance of the main-chain twisted asymmetric electron-donating core and fluorinated end-capping group in the construction of efficient PSCs.

Direct response of liquid crystal to pH changes for wide range pH sensing via the whispering gallery mode.

pH sensing is essential in various fields including healthcare, environmental monitoring, food safety, and agriculture. In this Letter, we propose a method for a wide-range pH measurement based on the direct response of liquid crystal (LC) to pH variations via the whispering gallery mode (WGM). The liquid crystal 4-cyano-4'-pentylbiphenyl (5CB) is selected for its excellent optoelectronic properties and the birefringence of 5CB microdroplets serving as spherical resonators. This sensor achieves wide-range pH sensing without any intermediaries. Polarized optical microscopy (POM) and WGM provide a qualitative morphological analysis and accurate quantitative spectral measurements. Under alkaline conditions (pH 7.6 to 13.3), POM images of 5CB microdroplets show a complete transition from bipolar to radial structures, with an average sensitivity of 1.78 nm/pH of redshift in WGM spectra. In acidic conditions (pH 6.65 to 1.5), structural changes observed by POM are minor, with a sensitivity of 1.06 nm/pH of blueshift in WGM spectra. This difference is attributed to the varying refractive indices of HCl and NaOH solutions. This method offers a reference for theoretical studies on pH and LC interactions and holds promise for the development of LC-based pH sensors.

A simple benzothiazolium-based sensor for cyanide detection: Applications in environmental analysis and bioimaging

A new sensor based on Ethylbenzothiazolium-2-hydroxynaphthaldehyde conjugate-based fluorescent sensor, (E)-3-ethyl-2-(2-(2-hydroxynaphthalen-1-yl) vinyl) benzo[d]thiazol-3-ium iodide (SU-1) was designed and synthesized. The structure of SU-1 was confirmed by 1H NMR, 13C NMR, HRMS, and single crystal XRD spectral analysis. SU-1 displayed a colorimetric and fluorometric response in a DMSO:H2O (1:1,v/v) matrix, changing color from pale yellow to colorless visible to the naked eye, accompanied by a ∼ 120 nm red-shift in the absorption spectra upon CN− addition. This shift, due to formation of deprotonation followed by the nucleophilic attack on the benzothiazolium ring’s double bond, disrupts π-conjugation, blocking intramolecular charge transfer within SU-1. However, competitive anions showed negligible interference while detecting CN−. The Limit of detection for CN− was determined to be 0.27 nM, significantly below the WHO’s permissible CN− concentration in drinking water (1.9 μM). Job’s plot analysis shows that the binding stoichiometry of SU-1 to CN− is a 1:1, with a stability constant (Ka) of 1.58 x 104 M−1. The sensor demonstrated practical applications in environmental water samples and fluorescence imaging of intracellular CN− in CAD cell line.

Rare-earth-free Sr(Ca)2Ga2GeO7 phosphors with Ca-substitution-induced red-shift emission, perfectly aligned for Chlorophyll's absorption

Rare-earth-free Sr(Ca)2Ga2GeO7 phosphors exhibiting self-activated luminescence properties were synthesized by solid-state method. The incorporation of Ca in place of Sr resulted in a pronounced redshift in the emission spectrum, enabling a closer alignment with the absorption spectrum of chlorophyll. This advancement offers increased flexibility in designing blue LEDs optimized for diverse crop growth applications.

An ultrafast optical sensor for simultaneous detection of NH3 temperature and concentration based on ultraviolet absorption spectral redshift combined with spectral reconstruction

As a renewable and carbon-free fuel with high energy density, ammonia (NH3) is a promising alternative to fossil fuels. Real-time detection of its temperature and concentration is significant in improving NH3 combustion efficiency. In this paper, we report an optical sensor, which enables simultaneous measurement of temperature and concentration of NH3. The key idea is to acquire the temperature of NH3 through absorption spectral redshift, and determine its concentration by building three-dimensional field map combined with spectral reconstruction. Firstly, we explain the generation mechanism of temperature-induced redshift in ultraviolet differential absorption spectrum based on energy level distribution theory. The relationship between spectral redshift and temperature is then established using spectral autocorrelation algorithm. Secondly, a spectral reconstruction method based on absorbed intensity mapping wavelength is proposed to ensure real-time detection of NH3. Finally, a three-dimensional field map between temperature, reconstruction slope, and concentration is constructed to achieve the detection. Results indicated that the mean relative error in temperature measurement was 1.04% and the mean absolute error in concentration detection was 0.26mg/m3 in air. Additionally, the NH3 sensor enabled long-term detection with a detection limit of 15.50μg/m2, demonstrating its potential to broaden the application of NH3 as a fuel.

Lattice constant, bandgap energy, absorption coefficient and dielectric function of the antimony-rich InBixSb1-x alloy using first-principles calculations

So far, little is known about the electronic and optical properties of InBixSb1-x. In this work, the first-principles calculations are performed to research the lattice constant, the bandgap energy, the absorption coefficient and the dielectric function of the antimony-rich InBixSb1-x. The results show that the bowing coefficient for the lattice constant is merely −0.012 Å. According to the band structures, it is found that the Sb-rich InBixSb1-x possesses a direct bandgap at G point. Its bandgap reduction is due to the ascending of the valence band maximum (VBM) and the descending of the conduction band minimum (CBM). For the sake of providing a good description for the bandgap energy in the Sb-rich range, the modified valence band anticrossing (MVBAC) model plus a linear equation is utilized. The result shows that the predicted positive to negative bandgap transition occurs at x = 0.13. Besides, the valence band offset between InSb and InBi is identified to be 0.27eV. For the optical properties, it is found that the Bi component is effective in raising the static dielectric constant of InBixSb1-x. However, it has a minor effect on the transition ability of the electrons. In the Sb-rich component range, the critical point energies E0+Δ0E1, E1+Δ1E2 and E1′ are found to shift toward the low energy direction. The result of the absorption spectra supports this opinion as increasing Bi component leads to a redshift of the absorption spectra. The adjustable bandgap energy and the optical properties of InBixSb1-x demonstrate that it is a strong candidate for fabricating the photodetectors in the 8–12 μm spectral region.

Behavior of defects in GaN avalanche photodiodes grown on GaN substrates

GaN avalanche photodiodes grown on GaN substrates were successfully fabricated. These devices displayed a low dark current, measuring <80 pA at a reverse bias of 82.0 V. Notably, the response spectrum of the devices showed new out-of-band response peaks with increasing reverse bias. Moreover, at high reverse bias, the devices emitted visible light. These phenomena were attributed to inherent defects within the materials. The defect level fitted from the tunneling currents closely matched the experimental value, indicating that the defect-assisted tunneling effect, with a defect level at 0.127 eV relative to the conduction band, contributed to the out-of-band response peak in the response spectrum. The Franz–Keldysh effect led to a redshift in the response spectrum. Additionally, the Mg-related deep energy level situated approximately 0.498 eV above the valence band, facilitated radiative recombination at high reverse bias. Meanwhile, the device’s luminescent image displayed a consistently square shape, suggesting uniform avalanche breakdown throughout the device.

Exploring the hydrogen storage in novel perovskite hydrides: A DFT study

This work employs density functional theory calculations to investigate the structural, hydrogen storage, mechanical, electronic, optical, and bonding characteristics of perovskite hydrides KNaX2H6 (X = Mg, Ca) for potential hydrogen storage applications. Negative formation energies, positive phonon dispersions, and appropriate tolerance factor values confirm the thermodynamic, dynamic, and cubic structural stability of these compounds. KNaMg2H6 exhibits a promising gravimetric hydrogen storage capacity of 5.19%, while KNaCa2H6 shows 4.09%. Both compounds display semiconducting behavior with indirect energy band gaps of 3.31 eV and 3.17 eV, respectively. Key mechanical properties, including bulk modulus, shear modulus, and Poisson's ratio, were evaluated using computed elastic constants. The desorption temperature for KNaMg2H6, determined to be 470.4 K, renders it suitable for practical applications. Partial Bader charge analysis reveals both ionic and slightly covalent bonding interactions. Optical analysis demonstrates strong ultraviolet absorption capabilities with a redshift in the absorption spectrum. The computed properties indicate these materials hold promise for hydrogen storage applications.

Impact of hydrolysis on the quantification of sulfonated acrylamide copolymers by size exclusion chromatography with UV detection

AbstractSize exclusion chromatography with UV detection (SEC‐UV) is a precise method for quantifying polyacrylamides in water. However, its accuracy can be compromised in complex matrices due to chemical degradation of the polymer. This study focuses on the impact of hydrolysis on quantifying sulfonated polyacrylamide copolymers (PAM‐AMPS) via SEC‐UV, analyzing key influencing factors. Using controlled hydrolysis, hydrolyzed copolymer (HPAM‐AMPS) standards with varying hydrolysis degree (HD) (HD = 7%–33%) were prepared without significant changes in polymer chain size. SEC‐UV analysis revealed that quantification accuracy is highly dependent on hydrolysis extent. Errors are minimal for HD up to 10%, but significantly higher for HDs of 22%–33%. Furthermore, this effect is modulated by polymer concentration. Our findings indicate that there are two compensating factors for the decrease in molar absorptivity due to amide‐to‐carboxylate substitution: the sulfonate group acting as an additional chromophore, and a redshift in absorption spectra due to hydrogen bonding at higher concentrations. This interplay between HD and concentration in this type of sulfonated polyacrylamide can help reduce quantification errors in complex aqueous samples prone to chemical degradation, like those found in environmental and subsurface applications.

Novel emissive styryl dyes from 9-methoxy anthracene: Synthesis, photophysical, thermal stability, viscosity, and DFT study

Novel styryl colorants based on anchoring methoxy with anthracene as a donor linked with various active methylene acceptor groups to derive a conjugated π-system along with push-pull geometry were synthesized and well characterized. Photophysical properties were studied in different polarity solvents. The impact of solvent polarizability is delivered in redshifts in absorption and emission spectra, in addition to enhancing the quantum yield. The benzoxazole and benzimidazole moieties in 4c and 4d demonstrated heat stability of more than 300 °C. Fluorescent intensity is directly proportional to the viscosity and 4a demonstrates a notable viscosity sensor through 1.36 fold increase in intensity. In comparison to other styryl dyes, 4c and 4d were shown to have higher values in DMSO for polarizability (53.3496 × 10−24 esu and 53.7459 × 10−24 esu) and first-order hyperpolarizability (86.3467 × 10−30 esu and 89.1941 × 10−30 esu) as well as second-order hyperpolarizability (1768.9121 × 10−36 esu and 1740.6940 × 10−36 esu) due to presence of heterocyclic character. NLO properties of all the styryl dyes 4a-4e are within the fundamental boundary limits. The 4d (benzoxazole) dye exhibited a small HOMO-LUMO energy gap of 2.8825 eV, whereas the 4b and 4e dyes had a larger band gap due to the presence of a carbonyl group.

A comprehensive study on three typical photoacid generators using photoelectron spectroscopy and abinitio calculations.

Conducting a comprehensive molecular-level evaluation of a photoacid generator (PAG) and its subsequent impact on lithography performance can facilitate the rational design of a promising 193nm photoresist tailored to specific requirements. In this study, we integrated spectroscopy and computational techniques to meticulously investigate the pivotal factors of three prototypical PAG anions, p-toluenesulfonate (pTS-), 2-(trifluoromethyl)benzene-1-sulfonate (TFMBS-), and triflate (TF-), in the lithography process. Our findings reveal a significant redshift in the absorption spectra caused by specific PAG anions, attributed to their involvement in electronic transition processes, thereby enhancing the transparency of the standard PAG cation, triphenylsulfonium (TPS+), particularly at ∼193nm. Furthermore, the electronic stability of PAG anions can be enhanced by solvent effects with varying degrees of strength. We observed the lowest vertical detachment energy of 6.6eV of pTS- in PGMEA solution based on the polarizable continuum model, which prevents anion loss at 193nm lithography. In addition, our findings indicate gas-phase proton affinity values of 316.4 kcal/mol for pTS-, 308.1 kcal/mol for TFMBS-, and 303.2 kcal/mol for TF-, which suggest the increasing acidity strength, yet even the weakest acid pTS- is still stronger than strong acid HBr. The photolysis of TPS+-based PAG, TPS+·pTS-, generated an excited state leading to homolysis bond cleavage with the lowest reaction energy of 83 kcal/mol. Overall, the PAG anion pTS- displayed moderate acidity, possessed the lowest photolysis reaction energy, and demonstrated an appropriate redshift. These properties collectively render it a promising candidate for an effective acid producer.

Salicylic Acid-Modified Sm-TiO2 for Photoluminescence and Photocatalysis under Real Sunlight: Synergistic Effects between Ligand-to-Metal Charge Transfer (LMCT) and Sm3+ Dopant.

A salicylic-acid (SA)-modified samarium-doped TiO2 complex (Sm-TiO2/SA) was synthesized via a sol-gel method followed by impregnation. A Raman Fourier transform IR and X-ray photoelectron spectroscopic study showed that SA (as an electron donor) forms a surface complex on the Sm-TiO2 surface through its phenolic/carboxylic functional groups. In the Sm-TiO2/SA complex, a ligand-to-metal charge transfer (LMCT) is active, inducing a marked red-shift in the absorption spectrum of TiO2, which extends to 550-600 nm. The synergetic effect between the LMCT process and the luminescent properties of the lanthanide ions (Sm3+) is discussed and supported by the photoluminescence spectra. Further photocatalytic experiments (under sunlight) and the study of the effect of different scavengers show the presence of competitive reactions between de-ethylation and cleavage of Rhodamine B (RhB) during its degradation. With the Sm-TiO2/SA complexes, the superoxide radical ion (O2 •-) is the main active species responsible for the N-de-ethylation pathway under sunlight irradiation. The cleavage of RhB by the hydroxyl radical (•OH) appears, instead, to dominate with the Sm-TiO2 photocatalysts.

Regulating the redshift of the charge transfer band edge and antithermal quenching by ion substitution strategy in YP1-xVxO4:Eu3+ phosphor

The redshift of the charge transfer band (CTB) edge of phosphor induced by temperature rise is pervasively accompanied by antithermal quenching. Accordingly, exploring the mechanism of the CTB redshift is thus not only propitious for optimizing the sensitivity of optical thermometry but also tenders a new idea for the design of antithermal quenching phosphors. Herein, a family of YP1-xVxO4:Eu3+ phosphors were designed via the V5+/P5+ ion substitution strategy. With the increase of the V5+ ratio, the relative integral intensity of the 5D0→7F2 transition multiplies from 1.25 to 28.67 times under CTB edge excitation. Moreover, by Gaussian fitting, the reduction degree of vanadate band gap energy 1E (1T1)→1B2 (1T2), 1A2 (1T1)→1B2 (1T2) increased from 0.122 eV and 0.065 eV to0.162 eV and 0.083 eV, respectively, in the range of 303–523 K. Both reveal an enhance in redshift of the excitation spectra. The decrease of charge transfer state (CTS) energy level and the alteration of photoelectron thermal population are two mechanisms that induce CTB redshift. Specifically, the decrease of the CTS level is dominant in the YPO4:Eu3+ sample, and the thermal population of the higher vibrational levels of the VO43−ground state is dominant in the presence of a tiny amount of V5+ doping. In addition, according to the experimental phenomenon, a dual-mode temperature sensing scheme based on excitation intensity ratio (EIR) and single band ratiometric (SBR) is proposed. Y0.9P0.1V0.9O4:0.1Eu3+ achieves a maximum sensitivity of Sr-max = 4.040 % K−1 and a minimum temperature determination uncertainty of δT = 0.124 K at 323 K, which excellent performance indicates that this is a promising non-contact optical thermometer.