Recovery Of Rare Earth Elements Research Articles

A novel bifunctional ionic liquid [N1888][OOB] for the separation of rare earth and transition metal in NdFeB magnet

In this paper, a series of novel bifunctional ionic liquids with methyltrioctylammonium as the cation and o-alkoxybenzoic acetate as the anion were synthesized. Their extraction properties were investigated for the separation of rare earth and transition metal for NdFeB waste recycling. It was found that [methyltrioctyl ammonium][o-octyloxybenzoic acetate] ([N1888][OOB]) could preferentially extract rare earth while the extraction abilities of Fe and Co were weak. The extraction mechanism of rare earth with [N1888][OOB] was indicated to be ion association in a molar ratio of 2:1. The rare earth loaded by [N1888][OOB] could be selectively stripped with water. Based on the above research results, a novel separation process was developed to separate rare earth, Fe and Co with [N1888][OOB]. This study intensified the separation process of rare earth and transition metals. The novel separation strategy based on [N1888][OOB] has revealed the advantages of efficiency and sustainability for rare earth recovery.

ZIF-8 Used for the Selective Recovery of Heavy Rare Earth Elements from Mining Wastewater.

In this study, a sample of 2-methylimidazole zinc salt (ZIF-8) demonstrated high selectivity for the recovery of heavy rare earth elements (REEs) from real rare earth mining wastewater. Results show that the distribution coefficient values of Y3+ (4.02 × 104 mL·g-1), Gd3+ (7.8 × 104 mL·g-1), and Dy3+ (6.8 × 104 mL·g-1) are orders of magnitude higher than those of K+ (359.51 mL·g-1), Mn2+ (266.67 mL·g-1), Ca2+ (396.42 mL·g-1), and Mg2+ (239.48 mL·g-1). Moreover, the desorption efficiency of heavy REEs exceeded 40%. Advanced characterizations and density functional theory (DFT) calculations were utilized to elucidate that the heavy REEs were more likely to bind to the nitrogen atoms of imidazole groups on ZIF-8 compared to non-REEs. Furthermore, the adsorption and desorption of heavy REEs primarily depend on the chemical interaction confirmed by adsorption kinetics, isotherm model, and thermodynamic analysis, which involves the dissociation of water and the formation of REE-O bonds. Finally, the ZIF-8 exhibits a remarkable recovery efficiency of over 40% for heavy REEs in column tests conducted over 7h. The findings reported here provide new insights into the selective recovery of heavy REEs from real mining wastewater.

Recovery of rare earth elements from low-grade coal fly ash using a recyclable protein biosorbent

Rare earth elements (REEs), including those in the lanthanide series, are crucial components essential for clean energy transitions, but they originate from geographically limited regions. Exploiting new and diverse supply sources is vital to facilitating a clean energy future. Hence, we explored the recovery of REEs from coal fly ash (FA), a complex, low-grade industrial feedstock that is currently underutilized (leachate concentrations of REEs in FA are < 0.003 mol%). Herein, we demonstrated the thermo-responsive genetically encoded REE-selective elastin-like polypeptides (RELPs) as a recyclable bioengineered protein adsorbent for the selective retrieval of REEs from coal fly ash over multiple cycles. The results showed that RELPs could be efficiently separated using temperature cycling and reused with high stability, as they retained ∼95% of their initial REE binding capacity even after four cycles. Moreover, RELPs selectively recovered high-purity REEs from the simulated solution containing one representative REE in the range of 0.0001–0.005 mol%, resulting in up to a 100,000-fold increase in REE purity. This study offers a sustainable approach to diversifying REE supplies by recovering REEs from low-grade coal fly ash in industrial wastes and provides a scientific basis for the extraction of high-purity REEs for industrial purposes.

Recovery of Rare Earth Elements from Ion-Adsorption Deposits Using Electrokinetic Technology: The Soil Conductivity Mechanism Study

Rare earth elements (REEs) are essential raw materials for modern industries but mining them has caused severe environmental issues, particularly the recovery of heavy REEs (HREEs) from ion-adsorption deposits (IADs). Very recently, an emerging technology, electrokinetic mining (EKM), has been proposed for the green and efficient recovery of REEs from IADs. However, the conduction mechanism of the weathering crust soil, which is also a prerequisite for EKM, remains unclear, making the EKM process unpredictable. Here, we systematically investigated the conductivity of weathering crust soil in the presence of light REEs (LREEs, i.e., La3+ and Sm3+) and HREEs (Er3+ and Y3+), respectively. Results suggested that the voltage was dynamically and spatially redistributed by the movement of REEs and water during EKM, and the conventional assumption of the linear distribution of voltage leads to an inaccurate description of soil voltage. We proposed an improved Archie’s equation by coupling the mechanisms of liquid phase and solid-liquid interface conduction, which can predict soil conductivity more precisely. Moreover, the extended Archie’s equation is able to recalculate the voltage distribution at distinct times and spaces well during EKM. More importantly, the water content in field-scale weathered-crust soils can be retrieved by the newly proposed Archie’s equation, which helps optimize the leaching wells and improve the recovery rate of REE. This study focuses on the conduction mechanism of weathering crust soil, which provides a theoretical basis for better use of the EKM technology and promotes mining efficiency fundamentally.

Electro-assisted sorption behavior and mechanism of low-concentration rare earth elements on carbon based materials

With increasing demands for rare earth elements (REEs) in high-tech and futuristic applications, developing efficient methods for recovering low-concentration REEs is necessary. Here, electro-assisted sorption of low-concentration REEs, La(III), Gd(III) and Y(III) (as symbol of light, medium, and heavy REEs) on carbon-based materials, activated carbon (AC), graphene, and graphite by a facile method was reported. Recovery of La(III), Gd(III) and Y(III) could reach ∼100 % under low-concentration condition where the maximum adsorption capacity was up to 342.38 mg/(g·dm2). Variants including applied voltage, electrodes-distance, pH, impurities, and concentration were considered to study the effects on REEs recovery. Interestingly, adsorption capacity and recovery under low voltage were respectively almost 20 and 14 folds than that without voltage, because voltage promoted REEs transfer and strengthened electrostatic interaction between electrodes and REEs. The mechanism for enhancing REEs recovery on carbon-based electrodes was resulted from high electric double layer (EDL) capacitance and low charge transfer resistance. Total desorption of REEs from electrodes could be quickly realized using NH4Cl or HCl solution. Overall, the study gave a new insight of low-concentration REEs recovery using carbon-based materials, and provided an efficient route using electric method with porous materials for REEs recovery.

Maximizing the Processing of Polymetallic Concentrates via Actinide Separation and Rare Earth Retrieval

AbstractDuring the last decades, the growing demand for rare earth elements (REEs) has led to numerous recent studies to recover these elements from various bearing ores and wastes. Therefore, the recovery of REEs from Ras Baroud polymetallic concentrate has been investigated in the current study. Physical beneficiation for the Ras Baroud pegmatite sample was carried out, yielding a concentrate for euxenite (Y), fergusonite (Y), xenotime (Y), monazite (Ce), allanite, thorite, uranothorite, and Hf-zircon, which resulted in raising the concentrations of rare earth elements, Th, Zr, U, and Ti in the sample. Fusion digestion processes with sodium hydroxide were studied using the Conceived Predictive Diagonal (CPD) technique. The three experimental digestion groups proved the dissolution of 99.9, 95.6, 99.9, 52.5, and 0.47% for REEs, Th, U, Ti, and Zr, respectively, under fusion conditions of 723 K, 120 min, 1/1.5 ore/alkali ratio, and − 100-μm particle sizes. Fusion kinetics, isotherms, and thermodynamics were investigated using several suggested models, namely, pseudo reversible first order, uptake general model, and shrinking core model which matched well with the experimental digestion results. Selective recovery of actinide content from REE content of the digested concentrate chloride solutions was accomplished using solvent extraction with di-2-ethyl hexyl phosphoric acid. About 99.9, 99.9, and 4.2% extraction efficiencies for Th, U, and REEs were performed, respectively, using 0.3 mol/L solvent concentration in kerosene as a diluent, 1/2 organic to aqueous ratio, an aqueous pH of 0.2, and 15-min contact time. Thorium and uranium ions were stripped with sulfuric acid solution 2.5 mol/L with 94 and 98% stripping efficiency, respectively. A highly purified REE precipitate was obtained from the raffinate solutions. Zircon mineralization tailings were obtained as a by-product through the alkaline digestion process.

Greening the supply chain: Sustainable approaches for rare earth element recovery from neodymium iron boron magnet waste

The increasing demand for modern technologies has led to a growing reliance on rare earth elements (REEs). To address this issue, recycling used products such as permanent magnet waste containing REEs. However, this approach necessitates the development of advanced extraction and separation techniques to ensure high yields and purity of the REEs extracted. This review provides an overview of the latest extraction and separation technologies, with a particular focus on the hydrometallurgical approach for extracting REEs from secondary sources, notably permanent magnets. Hydrometallurgy, which involves leaching followed by solvent extraction for purification, has gained widespread use for obtaining REEs from secondary sources, as evidenced by its reported high recovery efficiencies. We found that the recovery of REEs using chemical leaching varied between 80% and 99%, influenced by factors such as type of source material, leaching solvent, leaching conditions, impurities, reaction kinetics and solid-liquid ratio. However, effectively employing this process on a larger scale still faces certain challenges due to the excessive use of corrosive solvents for leaching magnet waste and the generation of toxic chemicals as end products in the form of leachate. Additionally, the current process exhibits deficiencies in the targeted recovery of REEs from magnet waste, specifically in achieving purity and selectivity by eliminating iron impurities. This article concludes that the future prospects for the selective recovery of REEs from neodymium iron boron magnet waste lie in green and environment-friendly solvents. One such approach revolves around the utilization of biodegradable organic acids and salt aqua regia for leaching. These solvents are less corrosive and have high dissolution efficiency, which results in less chemical consumption and an overall environment-friendly and cost-effective recovery process.

High-efficiency stepwise recovery of gallium and rare earths from NdFeB waste by a hydrometallurgical process

NdFeB waste serves not only as a crucial resource for the recovery of rare earth elements (REEs) but also as an underutilized source of gallium (Ga). In this work, to simultaneously extract REEs and Ga from NdFeB waste, an efficient and novel method was developed, which involved the process of leaching, reduction, solvent extraction, precipitation, and calcination. Initially, the Pr, Nd, and Ga were co-leached with 5 mol/L HCl and liquid-solid ratio (mL/g) of 5:1 at 90 °C for 150 min, resulting in the leaching rate of Pr, Nd, and Ga were 98 %, 99 %, and 98 %, respectively. Secondly, to mitigate the interference of Fe (III) on the extraction process, Fe (III) was reduced to Fe (II) completely using Fe powder for 10 min, given that the excess iron powder factor was 1.2. Then, the tributyl phosphate (TBP) was chosen as the extractant for Ga due to its high selectivity. Under the optimal conditions, three-stage counter-current extraction achieved an extraction efficiency of 99 % for Ga, with the addition of 10 % isodecanol to eliminate the third phase. The gallium was completely stripped by water at a phase ratio (O/A) of 2:1. Subsequently, di-2-ethylhexylphosphoric acid was selected as the Pr and Nd extractant because of its high separation ability between REEs and Fe (II). The extraction efficiency of Pr and Nd achieved more than 99 % through three-stage counter-current extraction and the entire stripping of Pr and Nd was realized by 1.8 mol/L HCl. Additionally, a significant amount of Fe (II) in the raffinate was treated via adding oxalic acid to obtain FeC2O4 ⋅ 2H2O. Finally, the Ga2O3 and Nd2O3 (PrO2) were prepared from the stripping solution. According to the whole process, the yield of Ga, Pr, and Nd was 93.4 %, 97 %, and 98 %, with the purity of Ga2O3 and Nd2O3 (PrO2) being 98.6 % and 98.4 %, respectively. The results suggested that the stepwise recovery of REEs and Ga from NdFeB waste can be achieved.

Sustainable Recovery of Rare Earth Elements from Ni-MH Batteries: Flux-Free Thermal Isolation and Subsequent Hydrometallurgical Refinement

This study details a sustainable approach for efficient recovery of highly pure rare earth elements oxides (REOs) from Ni-MH batteries. REOs (i.e., La, Ce, Sm, Nd, and Pr-oxides) were thermally isolated from spent Ni-MH batteries into an oxide phase with the REO concentration of 67.4 wt.%. Subsequently, separate leaching processes were conducted using sulfuric acid and hydrochloric acid solutions, and the results were compared in terms of efficiency and feasibility. Sodium REEs sulfate hydrate (NaRE(SO4)2.xH2O) was precipitated from the sulfuric acid leachate by adjusting the pH to 1.5 using sodium hydroxide, while the addition of oxalic acid to the hydrochloric acid leachate enabled the recovery of REEs as oxalate hydrate (RE2(C2O4)3.xH2O). The resulting sulfate salt was mixed with a sodium hydroxide solution, leading to the formation of REEs hydroxide. The REEs hydroxide and oxalate were calcinated at 1000°C, resulting in the production of REOs with a purity exceeding 99.7%. This research demonstrates the feasibility of developing an efficient, environmentally friendly, and sustainable approach for the recovery of highly pure REOs from Ni-MH batteries which potentially can minimize the environmental impact associated with the extraction of REOs from virgin sources, while addressing the challenge of effective recycling of end-of-life Ni-MH batteries.

Comprehensive recycling of slag from the smelting of spent automotive catalysts

Spent automotive catalyst is a valuable source of platinum group metals (PGMs), making them crucial secondary resources. Currently, the main process for recovering PGMs from these catalysts is metal capture method. The smelting process would produce a significant amount of residual slags containing various components like SiO2, Al2O3, CaO, Fe2O3, Na2O, as well as high levels of heavy metals including Cr, Pb, and Ni. These slags are considered either solid waste or hazardous waste and usually disposed of in landfills, which can have detrimental effects on the environment. Furthermore, the smelting slags also contain approximately 2–5 % rare earth elements and trace amounts of precious metal elements. In this study, vacuum carbothermal reduction is employed to pretreat the smelting slags. This method not only successfully removes the heavy metal element lead, but also efficiently achieves the recovery of rare earths, and the enrichment of platinum group metals by mineral phase transformation of cerium-zirconium solid solution and in-situ iron capture. The lead removal rate exceeded 99 %, and the grade of precious metals in the enrichment process was approximately 12 times higher than the original material, with a recovery rate more than 90 %. The leaching rate of rare earths also increased from less than 50 % to more than 95 % after vacuum carbothermal reduction. The effect of vacuum carbothermal reduction pretreatment on the smelting slag phase was systematically studied, and the mechanism behind the increasing rare earth leaching rate due to this pretreatment was further analyzed.

The fractional extraction for sustainable recovery of rare earth and thorium in radioactive waste with oxoacetate functionalized ionic liquid

Rare earth (RE) are critical elements in many technologies, their clean production has attracted widespread attentions. To develop clean separation technology for RE, a novel oxoacetate ionic liquid (IL) extractant was developed to recovery RE elements and Thorium (Th) in the radioactive waste residue from ion-absorbed RE separation industry. The IL [N-methyl-N,N-dioctyloctan-1-aminium][2-(bis(2-ethylhexyl)amino)-2-oxoacetate] ([N1888][DEAO]) had good selectivity to RE and Th, which helps to remove radioactive Th and recover RE from waste residue leachate. RE and Th could be effectively separated with 0.02 mol/L [N1888][DEAO]. Maximum extraction capacity of Th reached 1.02 g/L, which could meet the needs of Th removal in the waste residue. A combination of saturated NaC2O4 solution and NaOH solution was used for the stripping of Th. After five cycles, the extraction efficiency of Th remained above 90 %. After four-stage extraction with [N1888][DEAO] and three-stage scrubbing, a RE solution with Th content less than 0.6 mg/L was obtained. It is fully achieved that there is no excess wastewater and waste salt in the fractional process. The RE elements in the waste residue can be effectively recycled, also the collection of the radioactive element Th can be realized.

Gravity-Driven Separation for Enrichment of Rare Earth Elements Using Lanthanide Binding Peptide-Immobilized Resin.

Rare Earth Elements (REEs) constitute indispensable raw materials and are employed in a diverse range of devices, including but not limited to smartphones, electric vehicles, and clean energy technologies. While there is an increase in demand for these elements, there is a global supply challenge due to limited availability and geopolitical factors affecting their procurement. A crucial step in manufacturing these devices involves utilizing highly pure REEs, often obtained through complex and nonsustainable processes. These processes are vital in isolating individual REEs from mixtures containing non-REEs and other REEs. There exists an urgent requirement to explore alternative techniques that enable the selective recovery of REEs through more energy-efficient processes. To overcome the limitations mentioned above, we developed a microbead-based technology featuring immobilized lanthanide binding peptides (LBPs) for the selective adsorption of REEs. This technology does not require the utilization of external stimuli but uses gravity-based separation processes to separate the bound REE from the unbound REE. We demonstrate this technology's potential by enriching two relevant REEs (Europium and Terbium). Additionally, we propose a mechanism whereby REEs bind selectively to a particular LBP, leveraging the distinctive physicochemical characteristics of both the REE and the LBP. Moreover, these LBPs exhibit no binding affinity toward other frequently encountered industrial ions. Finally, we demonstrate the recovery of REEs through a change in system conditions and assess the reusability of the microbeads for subsequent adsorption cycles. We anticipate that this approach will address the challenges of REE recovery and demonstrate the potential of biomolecular strategies in advancing sustainable resource management.

Selective recovery of Sm from Sm-Co magnet scrap by vacuum distillation

Sm-Co rare earth permanent magnet materials are widely used in special fields such as new energy and electronic information. Sm-Co permanent magnet scraps are generated during the preparation and the use of end-of-life permanent magnets, which need to be recycled for the sustainable development. It is proposed to selectively recover Sm from the Sm-Co permanent magnet scraps by vacuum distillation. The experimental investigations were carried out in a vacuum furnace with double temperature zones for the efficient condensation of Sm vapor based on the thermodynamic and kinetic calculations. The recycling feasibility of the recovery of rare earth and the evaporation mechanism of Sm were also demonstrated in this work. The results show that Sm with the purity over 99% was obtained by the molybdenum condenser used as a condensing collectors at given conditions, providing a reference for the pyrometallurgical recovery of rare earth secondary resources.

Molding the future: Optimization of bioleaching of rare earth elements from electronic waste by Penicillium expansum and insights into its mechanism

The recovery of rare earth elements (REE) from electronic waste is crucial for ensuring future demand security, as there is a high supply risk for this group of elements, and mitigating the environmental impacts of conventional mining. This research focuses on extracting REE from waste printed circuit boards through bioleaching, addressing the limited attention given to this source. A strain of Penicillium expansum demonstrated efficient bioleaching under optimal conditions of 7.5 initial pH, 0.1 mM phosphate concentration, and excluding a buffering agent. The study achieved significant improvements in La and Tb extraction and enhancements in Pr, Nd, and Gd recovery, approaching 70 % within 24 h. Fungal mechanisms involved in REE extraction included fungal pH control, organic acid biosynthesis, phosphate bioavailability, and potential fungal proton pump involvement. This approach offers a promising solution for sustainable REE recovery from e-waste, contributing to resource security and circular economy.

Recovery of rare earth elements from mine wastewater using alginate microspheres encapsulated with zeolitic imidazolate framework-8

There is increasing demand and interest in efficient methods for the recovery of rare earth elements (REEs) from wastewater because of the growing concerns associated with the negative impacts of REEs-rich waste discharged on pristine ecosystems. Here, we designed a ZIF-8@ALG composite hydrogel by encapsulating zeolitic imidazolate frameworks-8 (ZIF-8) into sodium alginate and poly (vinyl alcohol) double cross-linked networks (ALG) for the recovery of REEs from mine wastewater. ZIF-8@ALG showed exceptional REEs adsorption performance with the most superior separation factor (Ho/Mn) of 597.5. For the REEs considered, the ZIF-8@ALG composite exhibited a preference for heavy REEs with high adsorption efficiencies (65.3 ∼ 97.2%) and distribution coefficients (2045.5 ∼ 28500.0 mL·g−1). Adsorption involved a combination of electrostatic attraction, complexation and ion exchange mechanisms. REEs adsorbed on ZIF-8@ALG could also be desorbed using sodium citrate via ion-exchange and complexation, thus achieving efficient REEs recovery. In addition, ZIF-8@ALG was stable and reusable, maintaining effective adsorption in wastewater over four consecutive cycles, where the optimal adsorption efficiency reached 80.0%. Overall, this study provided an effective and feasible method for the recovery of REEs in mine wastewater, and confirmed that ZIF-8-based materials have significant potential for REEs recovery applications in wastewater engineering treatment.

Bioleaching ion-unexchangeable rare earth in ion-adsorption type rare earth waste tailing

Ion-adsorption type rare earth ores (IREO) in China serve as the primary source of medium and heavy rare earth globally. With the rapidly growing demand for rare earth elements (REEs) and the dwindling supply of premium IREO, enhancing the recovery of REEs, especially the ion-unexchangeable REEs with ultra-low content and ambiguous speciation from IREO or its tailing, has become a critical trend and challenge. This study identified the occurrences of ion-unexchangeable REEs, primarily detected in Fe-enriched minerals, xenotime, and monazite of IREO using TESCAN integrated mineral analyzer (TIMA) and laser ablation inductively coupled plasma mass spectrometer (LA-ICP-MS) analysis. To extract these elusive REEs, a bioleaching technique utilizing Aspergillus niger (A. niger) metabolites was proposed, achieving a leaching yield of 31.4 wt%. Complementary sequential chemical extraction methods (SCEM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations further elucidate the underlying mechanism, involving the carboxylic acid produced by the metabolic process of microbes that dissolves goethite by disrupting FeO bonds and liberating REEs, which complexed with carboxylate (RCOO), to promote further dissolution. This work offers insight into enhancing the recovery of ion-unexchangeable REEs from IREO or its tailing, paving the way for sustainable and efficient rare earth mining practices.

Cerium oxide and neodymium oxide phytoextraction by ryegrass in bioenhanced hydroponic environments

Sustainable technologies for the recovery of rare earth elements (REE) from waste need to be developed to decrease the volume of ore mining extractions and its negative environmental consequences, while simultaneously restoring previously impacted lands. This is critical due to the extensive application of REE in everyday life from electronic devices to energy and medical technologies, and the dispersed distribution of REE resources in the world. REE recovery by plants has been previously studied but the feasibility of REE phytoextraction from a poorly soluble solid phase (i.e., nanoparticles) by different plant species has been rarely investigated. In this study, the effect of biostimulation and bioaugmentation on phytorecovery of REE nanoparticles (REE-NP) was investigated by exposing ryegrass seeds to REE-NP in hydroponic environments. This was studied in two sets of experiments: bioaugmentation (using CeO2 nanoparticles and Methylobacterium extorquens AM1 pure culture), and biostimulation (using CeO2 or Nd2O3 nanoparticles and endogenous microorganisms). Addition of M. extorquens AM1 in bioaugmentation experiment including 500 mg/L CeO2 nanoparticles could not promote the nanoparticles accumulation in both natural and surface-sterilized treatments. However, it enhanced the translocation of Ce from roots to shoots in sterile samples. Moreover, another REE-utilizing bacterium, Bacillus subtilis, was enriched more than M. extorquens in control samples (no M. extorquens AM1), and associated with 52% and 14% higher Ce extraction in both natural (165 μg/gdried-plant) and surface-sterilized samples (136 μg/gdried-plant), respectively; showing the superior effect of endogenous microorganisms’ enrichment over bioaugmentation in this experiment. In the biostimulation experiments, up to 705 μg/gdried-plant Ce and 19,641 μg/gdried-plant Nd could be extracted when 500 mg/L REE-NP were added. Furthermore, SEM-EDS analysis of the surface and longitudinal cross-sections of roots in Nd2O3 treatments confirmed surface and intracellular accumulation of Nd2O3-NP. These results demonstrate stimulation of endogenous microbial community can lead to an enhanced REE phytoaccumulation.

High-performance electrosorption of lanthanum ion by Mn3O4-loaded phosphorus-doped porous carbon electrodes via capacitive deionization

Transition-metal-oxide@heteroatom doped porous carbon composites have attracted considerable research interest because of their large theoretical adsorption capacity, excellent electrical conductivity and well-developed pore structure. Herein, Mn3O4-loaded phosphorus-doped porous carbon composites (Mn3O4@PC-900) were designed and fabricated for the electrosorption of La3+ in aqueous solutions. Due to the synergistic effect between Mn3O4 and PC-900, and the active sites provided by Mn–O–Mn, C/PO, C–P–O and Mn–OH, Mn3O4@PC-900 exhibits high electrosorption performance. The electrosorption value of Mn3O4@PC-900 was 45.34% higher than that of PC-900, reaching 93.02 mg g−1. Moreover, the adsorption selectivity reached 87.93% and 89.27% in La3+/Ca2+ and La3+/Na+ coexistence system, respectively. After 15 adsorption-desorption cycles, its adsorption capacity and retention rate were 50.34 mg g−1 and 54.12%, respectively. The electrosorption process is that La3+ first accesses the pores of Mn3O4@PC-900 to generate an electric double layer (EDL), and then undergoes further Faradaic reaction with Mn3O4 and phosphorus-containing functional groups through intercalation, surface adsorption and complexation. This work is hoped to offer a new idea for exploring transition-metal-oxide @ heteroatom doped porous carbon composites for separation and recovery of rare earth elements (REEs) by capacitive deionization.

Template-free efficacious morphology of electrosynthesized polyaniline/β-cyclodextrin host-guest complex on Au/rGO modified electrode for removal and recovery of rare-earth and heavy elements from seawater

Global water pollution and scarcity of water resources are turning increasingly into serious threats to the survival of all living organisms on Earth. This study offers an influent strategy for the electrosynthesis of reduced graphene oxide/polyaniline/β-cyclodextrin (rGO/PAni/βCD) nanocomposite and its application to the removal/recovery of heavy elements (HEs) and rare-earth elements (REEs). Besides physicochemical and electrochemical studies, the surface morphological and statistical properties of fabricated nanocomposite electrode were examined. The textural and morphological characteristics of nanocomposite electrode were investigated via AFM data based on statistical, stereometric, and fractal theory. The cohesive, porous, and well-developed morphology of fabricated nanocomposite electrode has enabled the electrodeposition technique to achieve significant simultaneous removal/recovery efficiency of HE and REE ions such as Pb(II), Cu(II), Cd(II), Hg(II), Ce(IV), and Nb(V). Therefore, using rGO/PAni/βCD, considerable removal of HEs and REEs was achieved under optimized pH, 0.1 M KNO3, and 35 mg L−1 metal ion initial concentration during 20 min. Removal capacity of the nanocomposite electrode is preserved subsequent to 10 cycles of electrodeposition/desorption, according to the desorption investigation through eluted adsorbent at time intervals in deionized water and adjusted acidic pH values. Then, using rGO/PAni/CD nanocomposite, simulated seawater remediation was accomplished successfully. This interdisciplinary approach reveals that the removal/recovery efficiency enhance linearly along with the improvement of well-developed morphology for electrosynthesized composites. Thus, these results suggest how the morphological features of the polymer composites could improve remediation of water resources.

Transport Model of Rare Earth Elements in Weathering Crusts during Electrokinetic Mining

Electrokinetic mining (EKM) is a novel method for rare earth element (REE) mining that can achieve green and efficient recovery of REEs. However, as yet, there is no accurate model for describing the electrokinetic transport of REEs in weathering crusts, and this hinders the wider application of EKM. The conventional model fails to capture the microscale transport physics occurring in the nanochannels that exist ubiquitously in weathering crusts. Consequently, the existing models cannot distinguish the mobilities of different REEs. Here, we report a new model for a more faithful description of the electrokinetic transport of REEs in weathering crusts that considers the ionic size, which has previously been neglected. We reveal that the electrokinetic transport of heavy REEs (HREEs) is faster than that of light REEs (LREEs) in weathering crusts, which is contrary to the predictions of conventional models. Our model was validated experimentally by measurements of the electrokinetic transport of two LREEs (La and Sm) and an HREE (Er) in weathering crusts. The speed of electrokinetic transport follows the order Er > Sm > La. Our findings suggest that the ionic size is a non-negligible factor affecting the electrokinetic transport of REEs in weathering crusts containing nanochannels. This work offers a constitutive model to describe the electrokinetic transport of REEs in weathering crusts, which promotes both theoretical developments and practical applications of EKM.