Reconstruction Of Acetabular Bone Defects Research Articles

Trabecular Metal Augments for Reconstruction of Acetabular Bone Defects in Revision Total Hip Replacement: Short-Term Outcomes

Trabecular Metal Augments for Reconstruction of Acetabular Bone Defects in Revision Total Hip Replacement: Short-Term Outcomes

Application of metal cushion block combined with Jumbo cup in reconstruction of acetabular bone defect in revision of artificial hip joint

To investigate the application effect and imaging changes of metal cushion block combined with Jumbo cup in the reconstruction of acetabular bone defect after revision of artificial hip joint. Retrospective analysis was made on the clinical data of 83 patients who underwent revision acetabular bone defect reconstruction of the artificial hip joint in our hospital from September 2019 to October 2021. They were divided into group A and group B according to different surgical methods. There were 42 patients in group A, including 26 males and 16 females, aged from 44 to 72 years old with an average of (60.57±4.62) years, who underwent revision with metal cushion block and Jumbo cup. There were 41 patients in group B, including 22 males and 19 females, aged from 42 to 71 years old with an average of (58.74±4.25) years, who underwent revision with metal cushion block and bone cement mortar cup. The operation related indexes, Harris hip function score and visual analogue scale (VAS) of pain before operation, 1 month and 12 month after operation were compared between two groups. The results of X-ray imaging examination (hip rotation center height, acetabular abduction angle, femoral eccentricity and imaging standard qualification rate) before and 12 month after operation were evaluated, and the incidence of complications was compared between two groups. There was no significant difference in operation time, intraoperative bleeding volume and postoperative drainage volume between two groups (P>0.05). Both groups were followed up for 12 to 36 months with an average of (25.36±3.59) months. The scores of pain, function, deformity and Harris' total score in the two groups at 1 month after operation were higher than those before operation (P<0.05), and the scores of pain, function, deformity, joint activity and Harris' total score in two groups at 1 year after operation were higher than those before operation and 1 month after operation (P<0.05), and the above scores in group A were higher than those in group B at 1 year after operation (P<0.05). The VAS of two groups decreased successively at 1 month and 1 year after operation (P<0.05), but there was no significant difference in both groups at each time point (P>0.05). The femoral eccentricity increased in both groups at 1 year after operation (P<0.05), and group A was higher than group B (P<0.05). The height of rotation center and acetabular abduction angle decreased in both groups at 1 year after operation (P<0.05), and the height of rotation center in group A was lower than that in group B (P<0.05), but there was no significant difference in acetabular abduction angle between two groups (P>0.05). The imaging qualification rate of group A was higher than that of group B (P<0.05). There was no significant difference in the incidence of adverse reactions between two groups (P>0.05). Metal cushion block combined with Jumbo cup in the treatment of acetabular bone defects can provide the hip joint function, and restore the hip joint rotation center, femoral eccentricity and acetabular abduction angle, with obvious clinical effect.

Trabecular metal augments for reconstruction of acetabular bone defects in revision total hip replacement; early radiological and clinical outcomes

Trabecular metal augments for reconstruction of acetabular bone defects in revision total hip replacement; early radiological and clinical outcomes

Mid‐ to Long‐term Follow‐up of Severe Acetabular Bone Defect after Revision Total Hip Arthroplasty Using Impaction Bone Grafting and Metal Mesh

In revision total hip arthroplasty (THA), reconstruction of severe acetabular bone defect continues to be problematic for orthopedic surgeons. This study reports the mid- to long-term survivorship, radiological outcomes, and complications of impaction bone grafting (IBG) and metal mesh with a cemented acetabular component in the reconstruction of severe acetabular bone defects in revision THA. This retrospective consecutive study included 26 patients (29 hips: type II B, four; type II C, three; type III A, 10; and type III B, 12) who underwent revision THA, which was performed using IBG and metal mesh, between 2007 and 2014 in our institution. All patients were followed up regularly for clinical and radiographical assessments. Migration and loosening of prosthesis graft integration and complications were observed and analyzed. Survival analysis was performed using a Kaplan-Meier survival analysis. At the time of revision, 75.9% of the hips (22 hips) were classified as type III bone defects. The average follow-up period was 9.4 ± 2.8 (range, 2.4-14.0) years. Of the 29 hips, four hips (13.8%) were assessed as clinical failures; at the last follow-up, two had undergone re-revision THA, and two had not been scheduled for re-revision THA despite radiological failure of the acetabular component. Among them, three clinical failures (10.3%) were due to aseptic loosening, and one (3.4%) was due to infection. Radiographic evaluation showed bone graft integration in all hips during the follow-up. The Kaplan-Meier survivorship analysis revealed an acetabular reconstruction survival rate of 86.5% (95% confidence interval, 61.4%-95.7%) at 10 years. IBG and metal mesh with a cemented acetabular component for revision THA is an effective technique for treating severe acetabular bone defects, with effective mid- to long-term outcomes due to the solid reconstruction of the acetabular bone defect and restoration of the hip rotation center.

Clinical Research Progress on 3D Printing Technology Assisted Reconstruction of Acetabular Bone Defects

Clinical Research Progress on 3D Printing Technology Assisted Reconstruction of Acetabular Bone Defects

Acetabular Reconstruction Using Multiple Porous Tantalum Augments: Three-Quarter Football Augment

Reconstruction of a large acetabular bone defect is a complex problem in revision hip arthroplasty. The authors report a novel method of reconstructing an uncontained acetabular defect (Paprosky type IIIb) using multiple tantalum augments. A 73-year-old female patient presented to our institution with a chronically dislocated primary left total hip arthroplasty with radiographs demonstrating migration of acetabular component and formation of pseudoarthrosis within the left ilium. Extensive arthrolysis and anatomic reconstruction of the acetabular bone defect were performed using the novel method of multiple tantalum augments. Postoperatively, recovery was initially complicated by multiple dislocations requiring an exchange to an elevated liner, however subsequently achieved good function.

Short-term clinical efficacy of three dimension printed titanium augments for the reconstruction of acetabular bone defects in revision total hip arthroplasty

Objective To evaluate the short-term clinical efficacy of three dimension printed titanium augments for the reconstruction of acetabular bone defects in revision total hip arthroplasty. Methods The retrospective study was conducted. To retrospectively analyze clinical data of 21 patients who were underwent revision total hip arthroplasty with severe acetabular bone defects reconstructed by three dimension printed titanium augment from March 2016 to September 2017 from Department of Orthopaedics, Beijing Friendship Hospital, Capital Medical University. There were 9 males and 12 females, age (58.9±6.3) years, 51-67 years, body mass index (23.8±2.9) kg/m2. According preoperative CT scan of hip joints, three dimension printed titanium augments were designed for acetabular defects personality. The data including the vertical distance from centre of rotation to the interteardrop line in X-ray examination, preoperative Harris score, final follow-up Harris score of hip postoperatively, and complications were recorded. Outpatient visits ranged from 11.8 to 19.6 months. Measurement data were expressed as (Mean±SD), and t test was used before and after surgery. Results For X-ray examination, the average vertical distance from centre of rotation to the interteardrop line was (6.1±1.2) cm preoperatively and (2.8±0.7) cm postoperatively, and the difference was statistically significant(P<0.01). The hip Harris score increased from preoperative (47.5±6.4) scores to the last follow-up (84.6±5.9) scores, and the difference was statistically significant (P<0.01). The final follow-up data showed the acetabular prosthesis and augments were stable, while there were no hip joint dislocation, periprosthetic joint infection, loosening of acetabular components and other complications. Conclusion Three dimension printed augments can reconstruct severe acetabular bone defects and restore the hip rotation centre. Key words: Arthroplasty, replacement, hip; Prosthesis failure; Acetabulum; Osteolysis; Recovery of function

Standardized Reconstruction of Acetabular Bone Defects Using the Cranial Socket System

Management of primary or secondary acetabular bone loss (D'Antonio type I-IV ). Implantation and stable fixation using a cementless, cranially extended oval press-fit cup to restore painless joint function and loading capacity. Septic or aseptic loosening of the acetabular component after total hip arthroplasty. Acetabular bone loss after tumor resection. Primary acetabular bone defects in developmental dysplasia of the hip. Persistent deep infection. Bone defects including the parts of the iliac bone adjoining the sacrum (fixation of the stem in the ilium is not possible any more). Complete exposure of the acetabular defect using a standard approach. Removal of the loose cup. Excision of soft and granulation tissue from the acetabular ground and the rim. Reaming of the acetabulum with sequentially larger hemispheric reamers until an adequate bony bed is created for the insertion of the cranial socket. Eccentric cranial sockets without a craniolateral flap are preferable for use in type I and II defects with teardrop lysis mostly involving the craniolateral acetabulum, if a trihedral press-fit fixation can be achieved. Supplementary screw fixation through the acetabular ground, is possible. If a type III defect is present, the authors recommend the use of cranial sockets with an anatomic flap in order to increase primary stability by supplementary screw fixation. This is especially recommended for the management of deficiencies in the medial or posterior wall. If there is pelvic discontinuity (type IV), adequate acetabular reconstruction with primary stability of the component can only be achieved by a supplementary intramedullary structured stem fixed in the dorsal part of the ilium. Partial loading of the operated limb with 10 kg for a period of 6-12 weeks. Then increased loading with 10 kg per week. Thrombosis prophylaxis until full weight bearing. Physiotherapy and gait training. A total of 50 cup revisions using the ESKA cranial socket system were clinically and radiologically analyzed with an average follow-up of 65.7+/-28.5 months (26-123 months). Defects were classified according to D'Antonio. There were 21 type II, 23 type III, and six type IV defects. The Harris Hip Score increased from 40 preoperatively to 68.3 points postoperatively. Four patients had recurrent hip dislocation requiring replacement of the inlay. In four cases of aseptic loosening, the acetabular component had to be revised. With revision of the acetabular component as an endpoint, implant survival was 92% after an average of 5.4 years.

Reconstruction of acetabular defect with wire mesh and impacted bone graft in cemented acetabular revision

To discuss the method of reconstruction of acetabular bone defect with wire mesh, impaction bone-grafting and a cemented cup in acetabular component revision. 21 hips in 21 patients, aged 50.1 (31 - 64), 2 hips being of the acetabular defect type I B, 1 hip of type II A, 4 hips of type II B, and 14 hips of type III according to the American Academy of Orthopaedic Surgeons (AAOS) grading system underwent reconstruction with wire mesh, impacted bone grafts and cemented polyethylene acetabular component, and then were followed up for 47 months (36 - 60 months). The mean Harris hip score improved from the preoperative 55.7 points to 92.9 points at the last time of follow-up. Radiographic incorporation between host the bone and allograft was achieved 11.4 months after the operation on average. The mean change of inclination of acetabular components was 2.2 degrees , in which one acetabular component developed a change of 15.5 degrees . The inclination of acetabular components increased by 1.7 degrees on average 3 months after the operation and 2.0 degrees 6 months after the surgery. The acetabular cup migrated medially and superiorly by 3.93 mm and 4.41 mm respectively, peaking in the sixth month after the operation. One hip developed heterotopic ossification (Brooker grade I). One hip received repeat revision because of the aseptic loosening of the acetabular component 25 months after the revision surgery. The changes of the position of acetabular cup mainly occur within six months after the reconstruction of severe acetabular bone defect with wire mesh, impacted bone graft and cemented polyethylene acetabular component. To prevent the displacement of the acetabular cup, it is necessary to keep initial stability of the acetabular cups within six months after the index surgery.

Acetabular defect reconstruction with impacted morsellized bone grafts or TCP/HA particles. A study on the mechanical stability of cemented cups in an artificial acetabulum model

In revision surgery of the acetabulum bone defects can be filled with impacted human morsellized bone grafts. Because of a worldwide limited availability of human bone, alternatives are being considered. In this study we compared the initial stability of acetabular cups after reconstructing a cavitary defect with various compositions of impacted tricalciumphosphate-hydroxyapatite (TCP/HA) particles and mixes of TCP/HA particles and human grafts in a realistic acetabulum model. Primary cemented cups and reconstructions with impacted human cancellous grafts were used as reference. A dynamic load displaced the acetabular cups superomedially. The primary cemented cups showed the highest stability. The cups with impacted human grafts produced the most displacement. All reconstructions with the TCP/HA particles showed a high stability of the cups. However, especially when using large TCP/HA particles this was probably due to a large amount of cement penetration. Mixing TCP/HA particles with human grafts seemed to decrease cement penetration, although still a high stability was obtained. In this perspective, we concluded that TCP/HA particles might be useful as a bone graft extender in the reconstruction of acetabular bone defects.