Reconfigurable Electronics Research Articles

Multibarrier Collaborative Modulation Devices with Ultra-High Logic Operation Density.

The demands for highly miniaturized and multifunctional electronics are rapidly increasing. As scaling-down processes of transistors are restricted by physical limits, reconfigurable electronics with switchable operation functions for different tasks are developed for higher function integration based on split- or vertical-dual-gate structures. To promote the present reconfigurable electronics and exceed the function integration limit, the critical issue is to integrate complex operations into simple circuit forms by establishing more control dimensions. This work proposes a multibarrier collaborative (MBC) modulation architecture to increase the control dimension by multiple forms of potential barriers and achieves combinational and reconfigurable logic operations by a single MBC device. The MBC architecture exhibits ultrahigh logic operation density, including 58.8% area reduction for multiplexer operations and 71.4% area reduction for 4-logic reconfigurable operations. Besides, a hardware security module composed of 4 MBC devices implementing 8 types of logic operations is demonstrated. This work reveals an effective design of function integration for next-generation electronics.

Deterministic Fabrication of Liquid Metal Nanopatterns for Nanophotonics Applications

AbstractGallium‐based liquid metals (LMs) are widely used for stretchable and reconfigurable electronics thanks to their fluidic nature and excellent conductivity. These LMs possess attractive optical properties for photonics applications as well. However, due to the high surface tension of the LMs, it is challenging to form LM nanostructures with arbitrary shapes using conventional nanofabrication techniques. As a result, LM‐based nanophotonics has not been extensively explored. Here, a simple yet effective technique is demonstrated to deterministically fabricate LM nanopatterns with high yield over a large area. This technique demonstrates for the first time the capability to fabricate LM nanophotonic structures of various precisely defined shapes and sizes using two different LMs, that is, liquid gallium and liquid eutectic gallium–indium alloy. High‐density arrays of LM nanopatterns with critical feature sizes down to ≈100 nm and inter‐pattern spacings down to ≈100 nm are achieved, corresponding to the highest resolution of any LM fabrication technique developed to date. Additionally, the LM nanopatterns demonstrate excellent long‐term stability under ambient conditions. This work paves the way toward further development of a wide range of LM nanophotonics technologies and applications.

The Molecular Nature of Redox-Conductive Metal-Organic Frameworks.

ConspectusRedox-conductive metal-organic frameworks (RC-MOFs) are a class of porous materials that exhibit electrical conductivity through a chain of self-exchange reactions between molecularly defined, neighboring redox-active units of differing oxidation states. To maintain electroneutrality, this electron hopping transport is coupled to the translocation of charge balancing counterions. Owing to the molecular nature of the redox active components, RC-MOFs have received increasing attention for potential applications in energy storage, electrocatalysis, reconfigurable electronics, etc. While our understanding of fundamental aspects that govern electron hopping transport in RC-MOFs has improved during the past decade, certain fundamental aspects such as questions that arise from the coupling between electron hopping and diffusion migration of charge balancing counterions are still not fully understood.In this Account, we summarize and discuss our group's efforts to answer some of these fundamental questions while also demonstrating the applicability of RC-MOFs in energy-related applications. First, we introduce general design strategies for RC-MOFs, fundamentals that govern their charge transport properties, and experimental diagnostics that allow for their identification. Selected examples with redox-active organic linkers or metallo-linkers are discussed to demonstrate how the molecular characteristics of the redox-active units inside RC-MOFs are retained. Second, we summarize experimental techniques that can be used to characterize charge transport properties in a RC-MOF. The apparent electron diffusion coefficient, Deapp, that is frequently determined in the field and obtained in large perturbation, transient experiments will be discussed and related to redox conductivity, σ, that is obtained in a steady state setup. It will be shown that both MOF-intrinsic (topology, pore size, and apertures) and experimental (nature of electrolyte, solvent) factors can have noticeable impact on electrical conductivity through RC-MOFs. Lastly, we summarize our progress in utilizing RC-MOFs as electrochromic materials, materials for harvesting minority carriers from illuminated semiconductors and within electrocatalysis. In the latter case, recent work on multivariate RC-MOFs in which redox active linkers are used to "wire" redox catalysts in the crystal interiors will be presented, offering opportunities to independently optimize charge transport and catalytic function.The ambition of this Account is to inspire the design of new RC-MOF systems, to aid their identification, to provide mechanistic insights into the governing ion-coupled electron hopping transport mode of conductivity, and ultimately to promote their applications in existing and emerging areas. With basically unlimited possibilities of molecular engineering tools, together with research in both fundamental and applied fields, we believe that RC-MOFs will attract even more attention in the future to unlock their full potential.

A reconfigurable integrated smart device for real-time monitoring and synergistic treatment of rheumatoid arthritis.

Rheumatoid arthritis (RA) is a global autoimmune disease that requires long-term management. Ambulatory monitoring and treatment of RA favors remission and rehabilitation. Here, we developed a wearable reconfigurable integrated smart device (ISD) for real-time inflammatory monitoring and synergistic therapy of RA. The device establishes an electrical-coupling and substance delivery interfaces with the skin through template-free conductive polymer microneedles that exhibit high capacitance, low impedance, and appropriate mechanical properties. The reconfigurable electronics drive the microneedle-skin interfaces to monitor tissue impedance and on-demand drug delivery. Studies in vitro demonstrated the anti-inflammatory effect of electrical stimulation on macrophages and revealed the molecular mechanism. In a rodent model, impedance sensing was validated to hint inflammation condition and facilitate diagnosis through machine learning model. The outcome of subsequent synergistic therapy showed notable relief of symptoms, elimination of synovial inflammation, and avoidance of bone destruction.

Stable n-Type Perylene Derivative Ladder Polymer with Antiambipolarity for Electrically Reconfigurable Organic Logic Gates.

Organic electrochemical transistors (OECTs) are one of the promising building blocks to realize next-generation bioelectronics. To date, however, the performance and signal processing capabilities of these devices remain limited by their stability and speed. Herein, the authors demonstrate stable and fast n-type organic electrochemical transistors based on a side-chain-free ladder polymer, poly(benzimidazoanthradiisoquinolinedione). The device demonstrated fast normalized transient speed of 0.56 ± 0.17 msum-2 and excellent long-term stability in aqueous electrolytes, with no significant drop in its doping current after 50 000 successive doping/dedoping cycles and 2-month storage at ambient conditions. These unique characteristics make this polymer especially suitable for bioelectronics, such as being used as a pull-down channel in a complementary inverter for long-term stable detection of electrophysiological signals. Moreover, the developed device shows a reversible anti-ambipolar behavior, enabling reconfigurable electronics to be realized using a single material. These results go beyond the conventional OECT and demonstrate the potential of OECTs to exhibit dynamically configurable functionalities for next-generation reconfigurable electronics.

Soft Robots with Plant-Inspired Gravitropism Based on Fluidic Liquid Metal.

Plants can autonomously adjust their growth direction based on the gravitropic response to maximize energy acquisition, despite lacking nerves and muscles. Endowing soft robots with gravitropism may facilitate the development of self-regulating systems free of electronics, but remains elusive. Herein, acceleration-regulated soft actuators are described that can respond to the gravitational field by leveraging the unique fluidity of liquid metal in its self-limiting oxide skin. The soft actuator is obtained by magnetic printing of the fluidic liquid metal heater circuit on a thermoresponsive liquid crystal elastomer. The Joule heat of the liquid metal circuit with gravity-regulated resistance can be programmed by changing the actuator's pose to induce the flow of liquid metal. The actuator can autonomously adjust its bending degree by the dynamic interaction between its thermomechanical response and gravity. A gravity-interactive soft gripper is also created with controllable grasping and releasing by rotating the actuator. Moreover, it is demonstrated that self-regulated oscillation motion can be achieved by interfacing the actuator with a monostable tape spring, allowing the electronics-free control of a bionic walker. This work paves the avenue for the development of liquid metal-based reconfigurable electronics and electronics-free soft robots that can perceive gravity or acceleration.

Mechanically Rupturing Liquid Metal Oxide Induces Electrochemical Energy

AbstractLiquid metals, such as Gallium‐based alloys, have unique mechanical and electrical properties because they behave like liquid at room temperature. These properties make liquid metals favorable for soft electronics and stretchable conductors. In addition, these metals spontaneously form a thin oxide layer on their surface. Applications made possible by this delicate oxide skin include shape reconfigurable electronics, 3D‐printed structures, and unconventional actuators. This paper introduces a new approach where liquid metal oxide serves as an electrochemical energy source. By mechanically rupturing their surface oxide, liquid metals form a galvanic cell and convert their chemical energy to electrical energy. When dispersing liquid metals into an ionically‐conductive liquid to form emulsions, this composite material can provide ∼500 mV of open‐circuit voltage and up to ∼4 μW of power. Protected by the naturally occurring oxide skin, the passivating oxide layer of the liquid metal shields it from self‐discharge over time. The device is also stable in harsh environments, such as high temperature or aquatic conditions. Future applications of this device are demonstrated by designing a strain‐activated stretchable battery and a pressure‐sensitive self‐powered keypad. These findings may unlock new pathways to design stretchable batteries and harness their inherent energy for self‐powered robust devices.

Reconfigurable Mott electronics for homogeneous neuromorphic platform

Abstract To simplify the fabrication process and increase the versatility of neuromorphic systems, the reconfiguration concept has attracted much attention. Here, we developed a novel electrochemical VO2 (EC-VO2) device, which can be reconfigured as synapses or LIF neurons. The ionic dynamic doping contributes to the resistance changes of VO2, which enables the reversible modulation of device states. The analog resistance switching and tunable LIF functions were both measured based on the same device to demonstrate the capacity of reconfiguration. Based on the reconfigurable EC-VO2, the simulated spiking neural network model exhibited excellent performances by using low-precision weights and tunable output neurons, whose final accuracy reached 91.92%.

From Droplets to Devices: Recent Advances in Liquid Metal Droplet Enabled Electronics

AbstractLiquid metals, particularly non‐toxic gallium‐based alloys, have emerged as promising materials for future soft electronics due to their unique properties, including fluidity, excellent electrical and thermal conductivities, and surface reactivity. They demonstrate adaptability, responsivity, and self‐healing abilities, offering a platform for innovative electronic devices. Embodied in a droplet form factor, gallium‐based liquid metal droplets (LMDs) combine the traits of liquid metals with the advantages of miniaturized structures, including high surface tension, high surface area, high mobility, and surface functionalization. This review discusses the inherent properties of LMDs, which have driven substantial research interest across various fields, such as sensors, robotics, electronic circuits, energy harvesters, drug delivery, and microfluidics systems, among others. Effective fabrication and processing techniques are detailed for LMDs, illustrating their role in applications previously challenging with conventional materials, such as reconfigurable, self‐healing, and transient electronics. Existing challenges and future directions in this growing field are discussed. This extensive review seeks to further the understanding of LMDs and their potential, offering a roadmap for their journey from a niche interest to a key material in various electronic devices.

Quantum imaging of the reconfigurable VO2 synaptic electronics for neuromorphic computing.

Neuromorphic computing has shown remarkable capabilities in silicon-based artificial intelligence, which can be optimized by using Mott materials for functional synaptic connections. However, the research efforts focus on two-terminal artificial synapses and envisioned the networks controlled by silicon-based circuits, which is difficult to develop and integrate. Here, we propose a dynamic network with laser-controlled conducting filaments based on electric field-induced local insulator-metal transition of vanadium dioxide. Quantum sensing is used to realize conductivity-sensitive imaging of conducting filament. We find that the location of filament formation is manipulated by focused laser, which is applicable to simulate the dynamical synaptic connections between the neurons. The ability to process signals with both long-term and short-term potentiation is further demonstrated with ~60 times on/off ratio while switching the pathways. This study opens the door to the development of dynamic network structures depending on easily controlled conduction pathways, mimicking the biological nervous systems.

Reconfigurable frequency multipliers based on graphene field-effect transistors

Run-time device-level reconfigurability has the potential to boost the performance and functionality of numerous circuits beyond the limits imposed by the integration density. The key ingredient for the implementation of reconfigurable electronics lies in ambipolarity, which is easily accessible in a substantial number of two-dimensional materials, either by contact engineering or architecture device-level design. In this work, we showcase graphene as an optimal solution to implement high-frequency reconfigurable electronics. We propose and analyze a split-gate graphene field-effect transistor, demonstrating its capability to perform as a dynamically tunable frequency multiplier. The study is based on a physically based numerical simulator validated and tested against experiments. The proposed architecture is evaluated in terms of its performance as a tunable frequency multiplier, able to switch between doubler, tripler or quadrupler operation modes. Different material and device parameters are analyzed, and their impact is assessed in terms of the reconfigurable graphene frequency multiplier performance.

Making soft and reconfigurable electronics with liquid metals

Gallium-based alloys can change shape when an electric potential reversibly alters its surface tension.

Integrated Multipurpose Power Electronics Interface for Electric Vehicles

A novel integrated multipurpose power electronics interface (IMPEI) for the new generation of plug-in electric vehicles (PEVs) and plug-in hybrid electric vehicles (PHEVs) is proposed in this paper. The IMPEI is a reconfigurable power electronics interface (PEI) that integrates the onboard charger with the drive inverter allowing the same interface to be used for various modes of operation such as propulsion and regenerative braking as well as vehicle-to-grid (V2G) and grid-to-vehicle (G2V) operations with grid flexibility. For each mode of operation, the IMPEI is reconfigured into a previously existing power converter topology. The principles of operation and coordination of various modes of operation of the IMPEI are explained in this paper. Based on component count, operating modes, and control complexity, a comparison of the IMPEI and recently proposed integrated PEIs (IPEIs) is provided. Specifications of BMW i3 are used as the benchmark for comparing size, cost, and efficiency. This paper discusses and validates experimental results.

Writing-Speed Dependent Thresholds of Ferroelectric Domain Switching in Monolayer α-In2 Se3.

An electrical-biased or mechanical-loaded scanning probe written on the ferroelectric surface can generate programmable domain nanopatterns for ultra-scaled and reconfigurable nanoscale electronics. Fabricating ferroelectric domain patterns by direct-writing as quickly as possible is highly desirable for high response rate devices. Using monolayer α-In2 Se3 ferroelectric with ≈1.2nm thickness and intrinsic out-of-plane polarization as an example, a writing-speed dependent effect on ferroelectric domain switching is discovered. The results indicate that the threshold voltages and threshold forces for domain switching can be increased from -4.2 to -5V and from 365 to 1216 nN, respectively, as the writing-speed increases from 2.2 to 10.6µm s-1 . The writing-speed dependent threshold voltages can be attributed to the nucleations of reoriented ferroelectric domains, in which sufficient time is needed for subsequent domain growth. The writing-speed dependent threshold forces can be attributed to the flexoelectric effect. Furthermore, the electrical-mechanical coupling can be employed to decrease the threshold force, achieving as low as ≈189±41 nN, a value smaller than those of perovskite ferroelectric films. Such findings reveal a critical issue of ferroelectric domain pattern engineering that should be carefully addressed for programmable direct-writing electronics applications.

Thin‐Film‐Shaped Flexible Actuators

Human‐like and creature‐like systems are one of the most representative imaginary blueprints of future robots. To fulfill this blueprint, the development of high‐performance actuators across different length scales is indispensable. Owing to their mechanical compliance and conformability to curvy surfaces of living organisms, flexible actuators have emerged as an essential direction of next‐generation actuators. This review focuses on thin‐film‐shaped flexible actuators (TFFAs), a rising family of flexible actuators, aiming to provide an overview of the state‐of‐art status in this exciting direction. The designs, manufacturing, and mechanisms of various TFFAs are summarized, according to their key composing materials/mechanisms, including, for example, nanomaterials, liquid crystal elastomers, shape memory polymers/alloys, hydrogels, biohybrids, and other mechanisms/materials. The representative applications of TFFAs are introduced, ranging from biomedical uses, robots for environment explorations, to haptic interfaces and reconfigurable electronics. Finally, the grand challenges and open opportunities are discussed in detail.

Nitrogen-Based Magneto-ionic Manipulation of Exchange Bias in CoFe/MnN Heterostructures.

Electric field control of the exchange bias effect across ferromagnet/antiferromagnet (FM/AF) interfaces has offered exciting potentials for low-energy-dissipation spintronics. In particular, the solid-state magneto-ionic means is highly appealing as it may allow reconfigurable electronics by transforming the all-important FM/AF interfaces through ionic migration. In this work, we demonstrate an approach that combines the chemically induced magneto-ionic effect with the electric field driving of nitrogen in the Ta/Co0.7Fe0.3/MnN/Ta structure to electrically manipulate exchange bias. Upon field-cooling the heterostructure, ionic diffusion of nitrogen from MnN into the Ta layers occurs. A significant exchange bias of 618 Oe at 300 K and 1484 Oe at 10 K is observed, which can be further enhanced after a voltage conditioning by 5 and 19%, respectively. This enhancement can be reversed by voltage conditioning with an opposite polarity. Nitrogen migration within the MnN layer and into the Ta capping layer cause the enhancement in exchange bias, which is observed in polarized neutron reflectometry studies. These results demonstrate an effective nitrogen-ion based magneto-ionic manipulation of exchange bias in solid-state devices.

Reconfigurable Two-Dimensional Air-Gap Barristors.

Reconfigurable logic circuits implemented by two-dimensional (2D) ambipolar semiconductors provide a prospective solution for the post-Moore era. It is still a challenge for ambipolar nanomaterials to realize reconfigurable polarity control and rectification with a simplified device structure. Here, an air-gap barristor based on an asymmetric stacking sequence of the electrode contacts was developed to resolve these issues. For the 2D ambipolar channel of WSe2, the barristor can not only be reconfigured as an n- or p-type unipolar transistor but also work as a switchable diode. The air gap around the bottom electrode dominates the reconfigurable behaviors by widening the Schottky barrier here, thus blocking the injection of both electrons and holes. The electrical performances can be improved by optimizing the electrode materials, which achieve an on/off ratio of 104 for the transistor and a rectifying ratio of 105 for the diode. A complementary inverter and a switchable AND/OR logic gate were constructed by using the air-gap barristors as building blocks. This work provides an efficient approach with great potential for low-dimensional reconfigurable electronics.

Highly Scalable, Flexible, and Frequency Reconfigurable Millimeter‐Wave Absorber by Screen Printing VO2 Switch Array onto Large Area Metasurfaces

AbstractFlexible and reconfigurable (FAR) electronics are in high demand for emerging applications, including wearable, bioelectronics, and internet of things. Highly scalable antenna arrays or periodic surfaces are required for high directivity or electromagnetic wave path control, particularly for 5G millimeter‐wave (mm‐wave) due to high path losses. Conventional lumped tuning components have limitations related to scalable FAR electronics and hence highly scalable and flexible vanadium dioxides (VO2) switch array is proposed for mm‐wave applications. A frequency reconfigurable mm‐wave absorber is designed by screen printing the VO2 switch array to demonstrate the proposed approach feasibility for large scale electronics, achieving high scalability, tunability, and flexibility because the 40 µm thick VO2 switch array satisfies radio frequency switch requirement. Flexibility and repeatability are tested up to 2000 bending cycles with 25 mm bending radius, and tunability and scalability are demonstrated with 300 ON/OFF ratio, and 98% product yield for 400 switches printed on 144 × 144 mm2 polyethylene terephthalate substrates. Absorption frequency is switchable from 14 to 28 GHz at 150 mm bend radius while retaining better than 90% absorptivity as a frequency reconfigurable mm‐wave absorber. Therefore, the proposed VO2 switch array would be suitable for scalable 5G and 6G FAR electronics.

3D actuation of foam-core liquid metal droplets.

Precise manipulation of liquid metal (LM) droplets possesses the potential to enable a wide range of applications in reconfigurable electronics, robotics, and microelectromechanical systems. Although a variety of methods have been explored to actuate LM droplets on a 2D plane, versatile 3D manipulation remains a challenge due to the difficulty in overcoming their heavy weight. Here, foam-core liquid metal (FCLM) droplets that can maintain the surface properties of LM while significantly reducing the density are developed, enabling 3D manipulation in an electrolyte. The FCLM droplet is fabricated by coating LM on the surface of a copper-grafted foam sphere. The actuation of the FCLM droplet is realized by electrically inducing Marangoni flow on the LM surface. Two motion modes of the FCLM droplet are observed and studied and the actuation performance is characterized. Multiple FCLM droplets can be readily controlled to form 3D structures, demonstrating their potential to be further developed to form collaborative robots for enabling wider applications.

Frequency memorizing shape morphing microstrip monopole antenna using hybrid programmable 3-dimensional printing

Four-dimensional printing is expected to help greatly assist many industries due to its unique ability to create self-morphing structures that react to external stimuli without human intervention. Nevertheless, it is currently limited to structural mechanics due to lacking integration with other technologies. In particular, the electronics industry strongly requires new materials for reconfigurable electronics since current active components have many drawbacks. This paper proposes frequency memorizing microstrip monopole antennas (MMAs) realized by hybrid programmable 3D printing using an inkjet to print onto shape morphing 3D printed material. Self-shape morphing electronics overcome limitations from passive structures or requiring additional morphing systems. Electromagnetic performance for the proposed hybrid-printed microstrip line was experimentally verified depending on the morphed shape (bent, wave, or twist). The proposed frequency memorizing MMA achieved 25.9 dB return loss at 3.43 GHz in the initial MMA (mode I). Resonance frequency reduced from 3.43 to 3.0 and 2.3 GHz for modes II and III, respectively. The programmed shape morphing MMA also successfully returned to the memorized initial stat, thus the MMA could provide functional and deployable systems with wireless connectivity in human inaccessible areas.