Recombinant Human Bone Morphogenic Protein-2 Research Articles

Stimuli-Responsive Codelivery System-Embedded Polymeric Nanofibers with Synergistic Effects of Growth Factors and Low-Intensity Pulsed Ultrasound to Enhance Osteogenesis Properties.

The present work aims to develop optimized scaffolds for bone repair by incorporating mesoporous nanoparticles into them, thereby combining bioactive factors for cell growth and preventing rapid release or loss of effectiveness. We synthesized biocompatible and biodegradable scaffolds designed for the controlled codelivery of curcumin (CUR) and recombinant human bone morphogenic protein-2 (rhBMP-2). Active agents in dendritic silica/titania mesoporous nanoparticles (DSTNs) were incorporated at different weight percentages (0, 2, 5, 7, 9, and 10 wt %) into a matrix of polycaprolactone (PCL) and polyethylene glycol (PEG) nanofibers, forming the CUR-BMP-2@DSTNs/PCL-PEG delivery system (S0, S2, S5, S7, S9, and S10, respectively, with the number showing the weight percentage). To enhance the formation process, the system was treated using low-intensity pulsed ultrasound (LIPUS). Different advanced methods were employed to assess the physical, chemical, and mechanical characteristics of the fabricated scaffolds, all confirming that incorporating the nanoparticles improves their mechanical and structural properties. Their hydrophilicity increased by approximately 25%, leading to ca. 53% enhancement in their water absorption capacity. Furthermore, we observed a sustained release of approximately 97% for CUR and 70% for BMP-2 for the S7 (scaffold with 7 wt % DSTNs) over 28 days, which was further enhanced using ultrasound. In vitro studies demonstrated accelerated scaffold biodegradation, with the highest level observed in S7 scaffolds, approximately three times higher than the control group. Moreover, the cell viability and proliferation on DSTNs-containing scaffolds increased when compared to the control group. Overall, our study presents a promising nanocomposite scaffold design with notable improvements in structural, mechanical, and biological properties compared to the control group, along with controlled and sustained drug release capabilities. This makes the scaffold a compelling candidate for advanced bone tissue engineering and regenerative therapies.

Elucidating the Benefit of Perforated vs Non-Perforated Membranes in Guided Bone Regeneration: An in Vivo Histologic Evaluation and Histomorphometric Analysis.

Background: Non-perforated Polytetrafluoroethylene (PTFE) membranes are effectively utilized in guided bone regeneration (GBR) but may hinder cell migration due to limited interaction with the periosteum. This study compared bone regeneration using occlusive or perforated membranes combined with acellular collagen sponge (ACS) and recombinant human bone morphogenic protein-2 (rhBMP-2) in a canine mandibular model. Material and Methods: Male beagle dogs (n=3) received two mandibular defects each to compare ACS/rhBMP-2 with experimental (perforated group) and control (non-perforated group) membranes (n=3 defects/group). Tissue healing was assessed histomorphologically, histomorphometrically and through volumetric reconstruction using microcomputed tomography. Results: The perforated group showed increased bone formation and reduced soft tissue formation compared to the non-perforated group. For the primary outcome, histomorphometric analysis revealed significantly greater total regenerated bone in the perforated group (67.08 ± 6.86%) relative to the nonperforated group (25.18 ± 22.44%) (p = 0.036). Perforated membranes had less soft tissue infiltration (32.91 ± 6.86%) compared to non-perforated membranes (74.82 ± 22.44%) (p = 0.036). Conclusion: The increased permeability of membranes in the perforated group potentially enabled periosteal precursor cells greater accessibility to rhBMP-2. The availability may have accelerated their differentiation into mature bone-forming cells, contributing to the stimulation of new bone production, relative to the non-perforated group.

Comparative Complications Associated With BMP Use In Patients Undergoing ACDF for Degenerative Spinal Conditions: Systematic Review and Meta-Analysis.

Systematic Review and Meta-Analysis. To compare complication incidence in patients with or without the use of recombinant human Bone Morphogenic Protein-2 (BMP2) undergoing anterior cervical discectomy and fusion (ACDF) for degenerative conditions. A systematic search of eight online databases was conducted using PRISMA guidelines. Inclusion criteria included English language studies with a minimum of 10 adult patients undergoing instrumented ACDF surgery for a degenerative spinal condition in which BMP2 was used in all patients or one of the treatment arms. Studies with patients undergoing circumferential fusions, with non-degenerative indications, or which did not report post-operative complication data were excluded. Patients with and without BMP2 were compared in terms of the incidence of dysphagia/dysphonia, anterior soft tissue complications (hematoma, seroma, infection, dysphagia/dysphonia), nonunion, medical complications, and new neurologic deficits. Of 1832 preliminary search results, 27 manuscripts were included. Meta-analysis revealed the relative risk of dysphagia or dysphonia (RR = 1.39, CI 95% 1.18 - 1.64, P = <.001), anterior soft tissue complications (RR = 1.43, CI 95% 1.25-1.64, P = <.001), and medical complications (RR = 1.32, CI 95% 1.06-1.66, P = .013) were statistically significant in the BMP2 group while the relative risk of non-union (RR = .5, CI 95% .23 - 1.13, P = .09) trended lower in the BMP2 group. Neurological deficit (RR = 1.06, CI 95% .82-1.37, P = .66), and additional medical complications (RR = 1.53, CI 95% .98-2.38, P = .06) were not found to be statistically different between the groups. This meta-analysis identified a high rate of arthrodesis when BMP2 was used in ACDF, but confirmed increased rates of dysphagia and anterior soft tissue complications. Surgeons may consider reserving BMP2 implementation for cases with a high risk of non-union, and should be aware of the risk of airway compromise.

The Combined Effects of RhBMP-2 and Systemic RANKL Inhibitor in Patients With Bone Density Loss Undergoing Posterior Lumbar Interbody Fusion: A Retrospective Observational Analysis With Propensity Score Matching.

The risks of nonunion and subsidence are high in patients with bone density loss undergoing spinal fusion surgery. The internal application of recombinant human bone morphogenic protein 2 (rhBMP-2) in an interbody cage improves spinal fusion; however, related complications have been reported. Denosumab, a human monoclonal antibody targeting the receptor activator of nuclear factor kappa B ligand (RANKL), hinders osteoblast differentiation and function. Therefore, this study aimed to observe the combined effect of the local application of rhBMP-2 in a lumbar cage and systemic RANKL inhibition on postoperative spinal fusion in patients with bone density loss undergoing posterior lumbar interbody fusion (PLIF). This retrospective observational study included 251 consecutive patients with spinal stenosis who underwent PLIF at a single center between 2017 and 2021. Clinical outcomes were assessed, and radiographic evaluations included lumbar flexion, extension, range of motion, and subsidence. Statistical analyses were conducted to identify the combined effect of the treatment and the subsidence and spinal fusion status. One hundred patients were included in the final analysis. Denosumab treatment significantly reduced the rate of osteolysis (p = 0.013). When denosumab was administered in combination with rhBMP-2, the fusion status remained similar; however, the incidences of postoperative osteolysis and postoperative oozing day decreased. The combined use of rhBMP-2 and RANKL inhibition in patients with bone density loss can enhance bone formation after PLIF with fewer complications than rhBMP-2 alone.

Efficacy of rhBMP-2 and Cellular Bone Matrix in the Revision of Alveolar Bone Grafting

Objective: This study presents a novel approach that utilizes recombinant human bone morphogenic protein 2 (rhBMP-2) and cellular bone matrix (CBM) for revision alveolar bone graft (ABG) in unilateral cleft lip and palate (UCLP) and bilateral cleft lip and palate (BCLP) patients following failed autologous ABG. Methods: A case series of 14 UCLP and 4 BCLP patients who had failed autologous ABG with revision ABG with rhBMP-2 and CBM. Review of demographics, operative data, Bergland score, and alveolar cleft gap volume was performed. Results: Revision ABG had short operative times and low blood loss in both UCLP and BCLP. No postoperative complications were found in either revision group. Repeat ABG surgery was required in one patient. Bergland score improved from 3.86 ± 0.53to 1.21 ± 0.80 in the UCLP group and from 3.75 ± 0.50to 1.00 ± 0.00 in the BCLP group. The cleft volume decreased by 83.62 ± 9.78% in UCLP and by 86.73 ± 13.65% in the BCLP group. Conclusions: Revision ABG with rhBMP-2 and CBM is a successful and reliable approach. This method has decreased operative time and no postoperative complications. Most patients achieved clinically successful grafting with canine eruption. Both UCLP and BCLP groups saw a significant decrease in alveolar cleft gap volume.

Effect of Mixture of Recombinant Human Bone Morphogenic Protein-2 and Demineralized Bone Matrix in Lateral Lumbar Interbody Fusion.

This study aims to determine the optimal dose of recombinant-human bone morphogenic protein-2 (rhBMP-2) for successful bone fusion in minimally invasive lateral lumbar interbody fusion (MIS LLIF). Previous studies show that rhBMP is an effective alternative to autologous iliac crest bone graft, but the optimal dose remains uncertain. The study analyzes the fusion rates associated with different rhBMP doses to provide a recommendation for the optimal dose in MIS LLIF. Ninety-three patients underwent MIS LLIF using demineralized bone matrix (DBM) or a mixture of rhBMP-2 and DBM as fusion material. The group was divided into the following three groups according to the rhBMP-2 usage : group A, only DBM was used (n=27); group B, 1 mg of rhBMP-2 per 5 mL of DBM paste (n=41); and group C, 2 mg of rhBMP-2 per 5 mL of DBM paste (n=25). Demographic data, clinical outcomes, postoperative complication and fusion were assessed. At 12 months post-surgery, the overall fusion rate was 92.3% according to Bridwell fusion grading system. Groups B and C, who received rhBMP-2, had significantly higher fusion rates than group A, who received only DBM. However, there was no significant increase in fusion rate when the rhBMP-2 dosage was increased from group B to group C. The groups B and C showed significant improvement in back pain and Oswestry disability index compared to the group A. The incidence of screw loosening was decreased in groups B and C, but there was no significant difference in the occurrence of other complications. Usage of rhBMP-2 in LLIF surgery leads to early and increased final fusion rates, which can result in faster pain relief and return to daily activities for patients. The benefits of using rhBMP-2 were not significantly different between the groups that received 1 mg/5 mL and 2 mg/5 mL of rhBMP-2. Therefore, it is recommended to use 1 mg of rhBMP-2 with 5 mL of DBM, taking both economic and clinical aspects into consideration.

Addition of recombinant human bone morphogenic protein-2 to the graft materials improves the clinical outcomes of implants placed in grafted maxillary sinus

Background/purposeThe long-term outcomes of implants placed in grafted sinuses using recombinant human bone morphogenetic protein-2 (rhBMP-2) are unclear. This study aimed to compare 3- and 5-year implant survival rates and marginal bone loss (MBL) during functional loading. Materials and methodsIn this retrospective study, we analyzed 63 implants inserted after maxillary sinus floor augmentation (MSFA) in 45 patients between January 2016 and April 2019. The outcome variables were: 1) 3- and 5-year cumulative survival rates of the implants and 2) MBL after functional loading. Other assessed variables included patient demographic information, preoperative residual bone height (RBH), surgical site, implant length and diameter, graft material, healing period before loading, prosthetic type, and opposing dentition. ResultsThe cumulative 3- and 5-year survival rates of the implants were 100% in the rhBMP-2 group and 95.5% and 86.4% in the non-rhBMP-2 group, respectively. The average 3- and 5-year MBL were 1.14 ± 0.67 mm, 1.30 ± 0.74 mm in the rhBMP-2 group and 1.68 ± 0.90 mm, 2.27 ± 1.29 mm in the non-rhBMP-2 group, respectively. Significant differences were observed between 3 and 5 years between the two groups. ConclusionAddition of the rhBMP-2 to the graft materials positively affects implant placement in the grafted maxillary sinus in terms of implant survival and MBL when preoperative RBH is unfavorable.

Osteogenic effects of covalently tethered rhBMP-2 and rhBMP-9 in an MMP-sensitive PEG hydrogel nanocomposite

While bone morphogenic protein-2 (BMP-2) is one of the most widely studied BMPs in bone tissue engineering, BMP-9 has been purported to be a highly osteogenic BMP. This work investigates the individual osteogenic effects of recombinant human (rh) BMP-2 and rhBMP-9, when tethered into a hydrogel, on encapsulated human mesenchymal stem cells (MSCs). A matrix-metalloproteinase (MMP)-sensitive hydrogel nanocomposite, comprised of poly(ethylene glycol) crosslinked with MMP-sensitive peptides, tethered RGD, and entrapped hydroxyapatite nanoparticles was used. The rhBMPs were functionalized with free thiols and then covalently tethered into the hydrogel by a thiol-norbornene photoclick reaction. rhBMP-2 retained its full bioactivity post-thiolation, while the bioactivity of rhBMP-9 was partially reduced. Nonetheless, both rhBMPs were highly effective at enhancing osteogenesis over 12-weeks in a chemically-defined medium. Expression of ID1 and osterix, early markers of osteogenesis; collagen type I, a main component of the bone extracellular matrix (ECM); and osteopontin, bone sialoprotein II and dentin matrix protein I, mature osteoblast markers, increased with increasing concentrations of tethered rhBMP-2 or rhBMP-9. When comparing the two BMPs, rhBMP-9 led to more rapid collagen deposition and greater mineralization long-term. In summary, rhBMP-2 retained its bioactivity post-thiolation while rhBMP-9 is more susceptible to thiolation. Despite this shortcoming with rhBMP-9, both rhBMPs when tethered into this hydrogel, enhanced osteogenesis of MSCs, leading to a mature osteoblast phenotype surrounded by a mineralized ECM. Statement of significanceOsteoinductive hydrogels are a promising vehicle to deliver mesenchymal stem cells (MSCs) for bone regeneration. This study examines the in vitro osteoinductive capabilities when tethered bone morphogenic proteins (BMPs) are incorporated into a degradable biomimetic hydrogel with cell adhesive ligands, matrix metalloproteinase sensitive crosslinks for cell-mediated degradation, and hydroxyapatite nanoparticles. This study demonstrates that BMP-2 is readily thiolated and tethered without loss of bioactivity while bioactivity of BMP-9 is more susceptible to immobilization. Nonetheless, when either BMP2 or BMP9 are tethered into this hydrogel, osteogenesis of human MSCs is enhanced, bone extracellular matrix is deposited, and a mature osteoblast phenotype is achieved. This bone-biomimetic hydrogel is a promising design for stem cell-mediated bone regeneration.

Assessment of Escherichia coli-derived Recombinant Human Bone Morphogenic Protein-2 on Fertilization and Early Embryonic Development in Rats

ObjectiveBone morphogenetic protein-2 (BMP-2) impacts fertility in women by affecting the menstrual cycle and embryonic development. We aimed to determine the reproductive toxicity of Escherichia coli (E. coli)-derived recombinant human BMP-2 (rhBMP-2) by measuring changes in the reproductive performance and organs in rhBMP-2-treated rats.MethodsOverall, 88 male and female rats each were categorized into one control and three experimental groups. rhBMP-2 was intravenously administered to the experimental groups at 0.05, 0.15, and 0.50 mg/kg/day, respectively. The male rats were administered rhBMP-2 daily, starting from 28 days before mating until the day of necropsy (48 days), after which they were euthanized and necropsied. The female rats were administered rhBMP-2 daily, starting from 14 days before mating until 7 days after fertilization (22–36 days), after which they were necropsied 13 days after fertilization.ResultsNo rhBMP-2-related death occurred throughout the study period. All rhBMP-2-treated groups showed swelling in the tail at the site of rhBMP-2 administration. In the high-dose rhBMP-2 group, the male rats showed a slight reduction in body weight and food consumption, whereas the female rats showed a reduction in the weights of the ovary and oviduct. Examining the fertilization status and necropsy showed no effect of rhBMP-2 on fertility and early embryonic development. The no-observed-adverse-effect level of rhBMP-2 was 0.50 mg/kg/day in all rats.ConclusionrhBMP-2 had no reproductive toxicity on the reproductive performance and organs in female and male rats. Therefore, these results provide new toxicology information on E. coli-derived rhBMP-2 as a therapeutic protein.

Comparative study of combined treatment with systemic substance P and local stromal derived factor 1 alpha on recombinant human bone morphogenic protein 2- induced ectopic bone formation in a rat model.

Comparative study of combined treatment with systemic substance P and local stromal derived factor 1 alpha on recombinant human bone morphogenic protein 2- induced ectopic bone formation in a rat model.

Implant Survival in Tissue-Engineered Mandibular Reconstruction-Early Experiences.

This article is to evaluate the early outcomes of dental implants placed in bone generated with tissueengineering techniques, specifically recombinant human bone morphogenic protein-2 (rhBMP-2), allogeneicbone particulate, and bone marrow aspirate concentrate (BMAC) in patients with resection of benignpathology. To evaluate the long-term prognosis of dental implants placed in tissue engineered mandibular reconstruction. We retrospectively evaluated 12 patient records, all of whom underwent segmental mandibular resection of benign pathology and reconstruction with a combination of BMAC, rhBMP-2, and allogeneic bone. Collecteddata points included the patient's age, gender, medical and social histories, implant site and placement date, resection/reconstruction date, final prosthesis, pathology resected, and follow-up dates (average 25 monthsof follow-up). Implant success was defined as clinical osseointegration (immobility), absence of peri-implantradiolucency, and absence of infection. Twelve patients met inclusion criteria with a total of 46 implants. The overall implant survival rate was 91.3%. There were 4 implant failures occurring in two patients: 1 failure in Patient 3 and 3 failures in Patient 8. Neitherpatient had any existing medical comorbidities or social history known to increase the risk for implant failure. The average implant placement occurred 11.6 months after mandibular reconstruction. Preliminary findings of implant placement in bone generated with tissue engineering techniques have shown to be another predictable alternative for orofacial rehabilitation. Practical Implications: Dental rehabilitationusing dental implants is a predictable treatment option for patients that have required reconstruction of largebony defects status post resection of benign pathology using novel tissue engineering techniques.

Collagen-Based Osteogenic Nanocoating of Microrough Titanium Surfaces.

The aim of the present study was to develop a collagen/heparin-based multilayer coating on titanium surfaces for retarded release of recombinant human bone morphogenic protein 2 (rhBMP2) to enhance the osteogenic activity of implant surfaces. Polyelectrolyte multilayer (PEM) coatings were constructed on sandblasted/acid-etched surfaces of titanium discs using heparin and collagen. PEM films of ten double layers were produced and overlayed with 200 µL of a rhBMP2 solution containing 15 µg rhBMP2. Subsequently, cross-linking of heparin molecules was performed using EDC/NHS chemistry to immobilize the incorporated rhBMP2. Release characteristics for 3 weeks, induction of Alkaline Phosphatase (ALP) in C2C12 cells and proliferation of human mesenchymal stem cells (hMSCs) were evaluated to analyze the osteogenic capacity of the surface. The coating incorporated 10.5 µg rhBMP2 on average per disc and did not change the surface morphology. The release profile showed a delivery of 14.5% of the incorporated growth factor during the first 24 h with a decline towards the end of the observation period with a total release of 31.3%. Cross-linking reduced the release with an almost complete suppression at 100% cross-linking. Alkaline Phosphatase was significantly increased on day 1 and day 21, indicating that the growth factor bound in the coating remains active and available after 3 weeks. Proliferation of hMSCs was significantly enhanced by the non-cross-linked PEM coating. Nanocoating using collagen/heparin-based PEMs can incorporate clinically relevant amounts of rhBMP2 on titanium surfaces with a retarded release and a sustained enhancement of osteogenic activity without changing the surface morphology.

Development of a system of heparin multilayers on titanium surfaces for dual growth factor release.

The aim of the present study was to establish a modular platform of poly-L-lysine-heparin (PLL-Hep) polyelectrolyte multilayer (PEM) coatings on titanium surfaces for dual growth factor delivery of recombinant human bone morphogenic protein 2 (rhBMP2) and recombinant human vascular endothelial growth factor 165 (rhVEGF165) in clinically relevant quantities. Release characteristics for both growth factors differed significantly depending on film architecture. rhBMP2 induced activation of alkaline phosphatase in C2C12 cells and proliferation of human mesenchymal stem cells (hMSCs). rhVEGF mediated induction of von Willebrand factor (vWF) in hMSCs and proliferation of human umbilical vein endothelial cells. Osteogenic and angiogenic effects were modified by variation in cross-linking and architecture of the PEMs. By creating multilayer films with distinct zones, release characteristics and proportion of both growth factor delivery could be tuned and surface-activity modified to enhance angiogenic or osteogenic function in various ways. In summary, the system provides a modular platform for growth factor delivery that allows for individual composition and accentuation of angiogenic and osteogenic surface properties.

A combined cell and growth factor delivery for the repair of a critical size tibia defect using biodegradable hydrogel implants.

The ability to repair critical‐sized long‐bone injuries using growth factor and cell delivery was investigated using hydrogel biomaterials. Physiological doses of the recombinant human bone morphogenic protein‐2 (rhBMP2) were delivered in a sustained manner from a biodegradable hydrogel containing peripheral human blood‐derived endothelial progenitor cells (hEPCs). The biodegradable implants made from polyethylene glycol (PEG) and denatured fibrinogen (PEG‐fibrinogen, PF) were loaded with 7.7 μg/ml of rhBMP2 and 2.5 × 106 cells/ml hEPCs. The safety and efficacy of the implant were tested in a rodent model of a critical‐size long‐bone defect. The hydrogel implants were formed ex‐situ and placed into defects in the tibia of athymic nude rats and analyzed for bone repair after 13 weeks following surgery. The hydrogels containing a combination of 7.7 μg/ml of rhBMP2 and 2.5 × 106 cells/ml hEPCs were compared to control hydrogels containing 7.7 μg/ml of rhBMP2 only, 2.5 × 106 cells/ml hEPCs only, or bare hydrogels. Assessments of bone repair include histological analysis, bone formation at the site of implantation using quantitative microCT, and assessment of implant degradation. New bone formation was detected in all treated animals, with the highest amounts found in the treatments that included animals that combined the PF implant with rhBMP2. Moreover, statistically significant increases in the tissue mineral density (TMD), trabecular number and trabecular thickness were observed in defects treated with rhBMP2 compared to non‐rhBMP2 defects. New bone formation was significantly higher in the hEPC‐treated defects compared to bare hydrogel defects, but there were no significant differences in new bone formation, trabecular number, trabecular thickness or TMD at 13 weeks when comparing the rhBMP2 + hEPCs‐treated defects to rhBMP2‐treated defects. The study concludes that the bone regeneration using hydrogel implants containing hEPCs are overshadowed by enhanced osteogenesis associated with sustained delivery of rhBMP2.

An ethical perspective to using bone grafts in dentistry

An ethical perspective to using bone grafts in dentistry

Recombinant Human Bone Morphogenic Protein-2 Immobilized Fabrication of Magnesium Functionalized Injectable Hydrogels for Controlled-Delivery and Osteogenic Differentiation of Rat Bone Marrow-Derived Mesenchymal Stem Cells in Femoral Head Necrosis Repair

Femoral head necrosis (FHN) is a clinically progressive disease that leads to overwhelming complications without an effective therapeutic approach. In recent decades, transplantation of mesenchymal stem cells (MSCs) has played a promising role in the treatment of FHN in the initial stage; however, the success rate is still low because of unsuitable cell carriers and abridged osteogenic differentiation of the transplanted MSCs. Biopolymeric-derived hydrogels have been extensively applied as effective cell carriers and drug vesicles; they provide the most promising contributions in the fields of tissue engineering and regenerative medicine. However, the clinical potential of hydrogels may be limited because of inappropriate gelation, swelling, mechanical characteristics, toxicity in the cross-linking process, and self-healing ability. Naturally, gelated commercial hydrogels are not suitable for cell injection and infiltration because of their static network structure. In this study, we designed a novel thermogelling injectable hydrogel using natural silk fibroin-blended chitosan (CS) incorporated with magnesium (Mg) substitutes to improve physical cross-linking, stability, and cell osteogenic compatibility. The presented observations demonstrate that the developed injectable hydrogels can facilitate the controlled delivery of immobilized recombinant human bone morphogenic protein-2 (rhBMP-2) and rat bone marrow-derived MSCs (rBMSCs) with greater cell encapsulation efficiency, compatibility, and osteogenic differentiation. In addition, outcomes of in vivo animal studies established promising osteoinductive, bone mineral density, and bone formation rate after implantation of the injectable hydrogel scaffolds. Therefore, the developed hydrogels have great potential for clinical applications of FHN therapy.

The Effects of Local Alendronate With or Without Recombinant Human Bone Morphogenetic Protein 2 on Dental Implant Stability and Marginal Bone Level: A Randomized Controlled Study.

The aim of this study was to evaluate the effects of local application of bisphosphonate gel and recombinant human bone morphogenic protein 2 gel, on titanium dental implant stability and marginal bone level. Twenty-seven patients with upper and lower missing posterior tooth/teeth were included in the study with a total of 71 implants that were used for rehabilitation. The implants were randomly divided into 4 groups: 3 study groups and 1 control. Group1; local application of bisphosphonate gel, group 2; local application of recombinant human bone morphogenic protein 2 gel, group 3; local application of a mixed formula of both gels. The gel application was immediately preimplant insertion, group 4; implant insertion without application of any medication. Using resonance frequency analyzer, implant stability was measured 4 times; primary, 8 weeks (second stage surgery), 12 weeks, and at least 14 weeks post functional loading. The level of the marginal bone around each implant were assessed using cone beam computed tomography. Four implants failed. Generally, there was a similar pattern of changes in implant stability over the study period in all groups and the stability was dependent on the healing time with no significant difference between groups. There was no significant treatment effect regarding marginal bone level differences of study groups against control, although there were significant differences on palatal and mesiodistal surfaces among the study (test) groups.

Bone regeneration in ceramic scaffolds with variable concentrations of PDRN and rhBMP-2

This study evaluated the bone regeneration capacity and mechanical properties of block-type hydroxyapatite (HA)/tricalcium phosphate (TCP) scaffolds in response to different concentrations of polydeoxyribonucleotide (PDRN) and recombinant human bone morphogenic protein 2 (rhBMP-2). Thirty-two male white rabbits were used as a model of calvarial bone defect and classified into eight groups according to type and concentration of growth factor administered, viz., control group (only HA/TCP scaffold), scaffold + PDRN (0.1, 1, 5, and 10 mg/mL each) and scaffold + rhBMP-2 (0.01, 0.05, and 0.1 mg/mL each). The specimens were evaluated using histomorphometric and radiological analyses. Histomorphometric analyses indicated that the administration of PDRN did not increase bone formation. However, significant increases in bone formation were observed with the administration of rhBMP-2 at 0.05 and 0.10 mg/mL on week 8 compared to the control (p < 0.05). Radiological analyses revealed a significant increase in bone formation at week 8 with the administration of PDRN at 5 mg/mL and 10 mg/mL, and rhBMP-2 at 0.05 or 0.10 mg/mL compared to the control (p < 0.05). Our findings show that block-type HA/TCP scaffolds possess sufficient mechanical strength and bone regeneration capacity when used with optimal concentrations of growth factors.

Evaluating the efficacy of recombinant human bone morphogenic protein-2 in the treatment of alveolar clefts with autologous bone grafting using computer-aided engineering techniques

Recent studies have indicated the use of recombinant human bone morphogenetic protein-2 (rhBMP-2) to be a viable adjunctive to alveolar cleft reconstruction owing to its osteoinductive capacity. This study aimed to evaluate the efficacy of rhBMP-2 in the treatment of alveolar cleft with autologous bone grafts by precise volumetric analysis. Twenty-six patients (aged 8-14) with unilateral alveolar clefts were enrolled in this comparative study. Patients were divided into two groups: the iliac crest bone graft (ICBG) was placed at the side of the cleft in the control group (ICBG group), and rhBMP-2 was mixed with the ICBG in the rhBMP-2 group (BMP group). Helical computed tomographic images were obtained preoperatively and 12 months postoperatively. The datasets were reconstructed as three-dimensional (3D) images using Mimics software and processed using Geomagic Wrap. The newly formed bone of the alveolar cleft was segmented by identifying the differences between preoperative and postoperative 3D images. In the ICBG group, the volume of newly formed bone ranged from 0.25 to 0.88 cm3, and the mean (SD) bone formation percentage was 42.01% (15.57%). In the BMP group, the volume of newly formed bone ranged from 0.34 to 1.09 cm3, and the bone formation mean (SD) percentage was 55.79% (11.84%). There was a statistically significant difference between the two groups in terms of the postoperative percentage of bone formation (p = 0.022). Thus, rhBMP-2 combined with an autologous bone graft is a promising technique to improve the results of secondary alveolar bone grafting.

Long-Term Response to a Bioactive Biphasic Biomaterial in the Femoral Neck of Osteoporotic Rats.

Osteoporosis often leads to fragility fractures of the hip, resulting in impaired quality of life and increased mortality. Augmenting the proximal femur could be an attractive option for prevention of fracture or fixation device failure. We describe a tissue engineering based strategy to enhance long-term bone formation in the femoral neck of osteoporotic rats by locally delivering bioactive molecules; recombinant human bone morphogenic protein-2 (rhBMP-2), and zoledronic acid (ZA) by using a calcium sulfate/hydroxyapatite (CaS/HA) biomaterial. A defect was created by reaming the femoral neck canal of osteoporotic (OVX) rats and they were treated as follows: G1. Empty, G2. CaS/HA, G3. CaS/HA+Systemic ZA, G4. CaS/HA+Local ZA, and G5. CaS/HA+Local ZA+rhBMP-2. Bone formation was evaluated 6 months after treatment. Further, radioactively labeled 14C-ZA was used to study the bioavailability of ZA at the defect location, which was determined by using scintillation counting. Micro-CT indicated significantly higher bone volume in groups G4 and G5 compared with the other treatment groups. This was confirmed qualitatively by histological assessment. Addition of rhBMP-2 gave no additional benefit in this model. Local delivery of ZA performed better than systemic administration of ZA. Mechanical testing showed no differences between the groups, likely reflecting that the addition of bioactive molecules had limited effect on cortical bone or the choice of mechanical testing setup was not optimal. Scintillation counting revealed higher amounts of 14C-ZA present in the treated leg of G4 compared with its contralateral control and compared with G3, indicating that local ZA delivery can be used to achieve high local concentrations without causing a systemic effect. This long-term study shows that local delivery of ZA using a CaS/HA carrier can regenerate cancellous bone in the femoral neck canal and has clear implications for enhancing implant integration and fixation in fragile bone.Impact statementThis long-term study shows a promising method to enhance bone formation in the femoral neck canal of osteoporotic rats. The approach involves a ceramic carrier that facilitates bone regeneration via sustained delivery of bioactive molecules locally in the femoral neck. Further, the carrier acts as a local depot for bioactive molecule delivery for as long as 6 months with overall positive effect on bone regeneration. The results from this model can potentially be translated into the clinics for reinforcing the femoral neck or for enhancing implant anchorage in poor-quality osteoporotic bone, which presents a real clinical challenge in fragility fractures.