Reciproc Blue R25 Instruments Research Articles

Shaping outcomes of Reciproc Blue and Rotate in roots canals with band-shaped isthmuses: micro-CT study.

This study assessed the outcome of shaping the mesial roots of mandibular first molars containing band-shaped isthmuses with an isthmus floor located at the apical third with Reciproc Blue and Rotate instruments in terms of canal transportation, canal aberrations and unprepared apical canals. Pair-matched mesial roots of mandibular first molars according to their isthmus location (distance from apical foramina) and size were constructed based on quantitative measurements (length, major and minor diameter at isthmus roof and floor) on preoperative micro-CT scanning (n = 10). The pair-matched specimens were prepared either using Reciproc Blue R25 (25.08v) or Rotate (15.04, 20.05, 25.06) instruments and then subjected to a second micro-CT scanning. Micro-CT scans were analysed to evaluate the canal transportation at the apical foramen and isthmus floor levels and the frequency of procedural errors (separated instruments, artificial canal preparation, cross shaping and unprepared apical canals). Canal transportation values were compared using Mann-Whitney U, and the distribution of procedural errors was compared with chi-square tests with a 5% significance threshold. Greater transportation values were detected in the apical foramen level compared to the isthmus floor in both groups. No significant difference was detected between Rotate and Reciproc Blue groups in terms of absolute transportation values and the incidence of procedural errors (p > .05). Preparation of mesial root canals containing a band-shaped isthmus at the apical portion with Reciproc Blue and Rotate instruments caused transportation of the original canal position at the isthmus floor and the apical foramen levels and resulted in procedural errors. This ex vivo micro-CT study using controlled pair-matched specimens showed that presence of a band-shaped isthmus complicates canal preparation procedure irrespective of the preparation systems.

Characterization of four heat-treated reciprocating instruments: Design, metallurgy, mechanical performance, and irrigation flow patterns.

To compare the design, metallurgy, and mechanical properties of four heat-treated reciprocating instruments coupled with the evaluation of the irrigation flow using an in silico model. New EdgeOne Fire Primary, Easy-File Flex Regular 25, WaveOne Gold Primary and Reciproc Blue R25 instruments (n = 124) were initially evaluated regarding their design through stereomicroscopy, scanning electron microscopy and 3D surface scanning. In addition, energy-dispersive X-ray spectroscopy was utilized to determine their elemental composition, and differential scanning calorimetry tests to evaluate their phase transformation temperatures. Their mechanical performance was further assessed through torsional and bending tests. Using scans obtained from a real tooth and the instruments, a computational fluid dynamics assessment was conducted to determine the irrigation flow pattern, apical pressure, and wall shear stress in simulated canal preparation. Mood's median and One-way anova post hoc Tukey tests were used for statistical comparisons (α = 5%). Reciproc Blue exhibited a superior number of blades (n = 8), whereas EdgeOne Fire had the highest overall volume (4.38 mm3 ) and surface area (32.32 mm2 ). At the 3-mm axial level, EdgeOne Fire displayed the lowest core diameter (0.13 mm), while Reciproc Blue had the highest (0.16 mm). All blades were symmetrical, and the tips of the instruments were non-active but differed from each other. The most irregular surfaces were observed in EdgeOne Fire and Easy-File Flex. All instruments were manufactured from nickel-titanium alloys and exhibited distinct phase transformation temperatures. WaveOne Gold and Reciproc Blue demonstrated the highest maximum torque values (1.87 and 1.62 N cm, respectively), while the lowest was observed on EdgeOne Fire (1.21 N cm) (p < .05). The most flexible (p < .05) were EdgeOne Fire (angle of rotation: 602.6°; maximum bending load: 251.4 g.f) and Reciproc Blue (533.2° and 235.6 g.f). There were no significant differences observed in the irrigation flow among the four domains generated by the tested instruments. Despite observing variations in the design, phase transformation temperatures, and in the torsional and bending test outcomes among the four heat-treated reciprocating instruments, no significant differences were found in the irrigation flow pattern among the different groups in the simulated root canal preparations.

Influence of access cavity preparation on the dentine thickness of mesial canals of mandibular molars prepared with reciprocating instruments

To evaluate the influence of traditional and conservative access cavity preparations on the remaining dentine thickness in the coronal third of mesial canals of extracted mandibular molars prepared with reciprocating instruments using micro-computed tomography as the analytical tool. Seventy extracted mandibular molars were scanned at a pixel size of 19μm. From this initial sample, 20 teeth were selected, pair-matched and distributed into two groups (n=10) according to the access cavity preparation: traditional (TradAC) or conservative (ConsAC). The root canals were sequentially enlarged with Reciproc Blue R25 (size 25, 0.08v taper) and R40 (size 40, 0.06v taper) instruments. A new scan was performed and the postoperative stacks were coregistered with their respective preoperative datasets. A colour-coded cross sections of the roots were created and used to identify and measure the smallest dentine thickness related to both MB and ML canals at 1.0-mm intervals from the furcation level of up to 5mm in the apical direction, in both mesial and distal aspects of the roots, before and after preparation. The statistical analyses were performed with paired-samples t-test, independent-samples Student T-test and Chi-Square test with a significance level of 5%. At all levels of both groups, dentine thickness before preparation was greater than after preparation (p<.05). No difference in the percentage of dentine reduction was observed between TradAC and ConsAC groups (p>.05), but a significantly greater reduction was observed to the distal aspect of the roots (p<.05). After root canal preparation, dentine thinner than 0.5mm was observed mostly along the distal aspect of the root (10% to 15%) of the MB and ML canals, with no influence of the access cavity type on its incidence to either mesial (X2 =1.66; p=.2) or distal (X2 =0.40; p=.5) directions. In the TradAC group, dentine thickness in most slices was greater than 1.0mm after preparation (n=124) whilst, in the ConsAC, it ranged from 0.5 to 1.0mm (n=136). Traditional or conservative access cavity preparation in extracted mandibular molars did not influence the remaining dentine thickness in the coronal third of mesial canals enlarged with thermomechanically treated nickel-titanium reciprocating instruments.

Alteration in surface roughness of reciprocating endodontic instruments

Background: Surface roughness is one of the most important characteristics of endodontic instruments, correlating to instrument fracture. The purpose of this study was to measure the surface roughness values of these instruments before and after resin root canal preparation without previous glide path preparation, with the new method. Data was obtained from field emission scanning electron microscopes (FE-SEM) combined with independent ImageJ software (NIH, Bethesda, MD, USA). Methods: A total of 20 simulated J-shape resin blocks with a radius of 4.5 mm, length of 16 mm, and angle of inflection of 600 were chosen and distributed into two equal groups. Each group was prepared by the WaveOne Gold Primary (Dentsply Sirona, Maillefer, Ballaigues, Switzerland) or the Reciproc Blue R25 (VDW, Munich, Germany) instruments, without glide path preparation. Special molds were used to confirm the same areas on the cutting blade at 3 mm and the instruments’ tips were scanned by FE-SEM, at different observed times. The parameters of Ra, Rq, and Rz in each sample were collected using the ImageJ software for analyses. The data was processed using the paired t-test with a significance level of 0.05. Results: Right after the first resin canal instrumentation, the surface roughness parameters of the two reciprocating investigated instruments were decreased. Conclusions: The FE-SEM images processed using the ImageJ software offered a trustworthy and suitable method for assessment of the NiTi endodontic file surface roughness.

Does the type of endodontic access influence in the cyclic fatigue resistance of reciprocating instruments?

The aim of the present study was to compare the cyclic fatigue resistance of Reciproc R25 (R25) and Reciproc Blue R25 (R25B) instruments, after simulated clinical use in traditional (TradAC) and ultraconservative (UltraAC) endodonticaccess cavities. Forty mandibular molars were randomly assigned into the following groups, according to the type of access and instrument to be used: TradAC and R25, TradAC and R25B, UltraAC and R25, and UltraAC and R25B. Teeth were accessed accordingly, and the root canals were prepared using "RECIPROC ALL" kinematics. The cyclic fatigue resistance of the forty used instruments was obtained measuring the time to fracture in an artificial stainless-steel canal. Ten brand new R25 and R25B were used as control groups. The fracture surfaces and the side cutting edges of the instruments were examined with a scanning electron microscope. Data were statistically analyzed using one-way ANOVA and post hoc Tukey tests with a significance level of P < 0.05. R25B instruments showed significantly higher cyclic fatigue resistance than R25, regardless of the access cavity type (P < 0.05). No differences were observed in the cyclic fatigue resistance between instruments without simulated clinical use and used in TradAC (P > 0.05). R25 and R25B used in UltraAC showed significantly lower cyclic fatigue resistance compared with the instruments used in TradAC and without simulated clinical use (P < 0.05). R25B files showed improved cyclic fatigue resistance than R25. The use of R25B and R25 files in mandibular molars with UltraACs decreased their cyclic fatigue resistance, compared with TradAC. The use of Reciproc and Reciproc Blue files in mandibular molars with ultra-conservative endodontic accesscavities reduced their cyclic fatigue resistance. Clinicians should be aware about the reduced cyclic fatigue resistance of these files when used in mandibular molars with UltraAC, due to the synergistic effect of access angulation and severe curvature induced in the endodontic files.

A new method for assessment of nickel-titanium endodontic instrument surface roughness using field emission scanning electronic microscope

BackgroundTo introduce a new method for measurement of surface roughness of the endodontic instrument, before and after instrumentation, using the Field Emission Scanning Electronic Microscope (FE-SEM) combined with the ImageJ software.MethodsTwenty J-shape resin blocks were divided into two groups, ten blocks of each group. Simulated root canal inside the resin block was 16 mm length, 600 angle of curvature, and radius of 4.5 mm. Ten WaveOne Gold Primary and 10 Reciproc Blue R25 instruments were used for root canal instrumentation. The instruments were scanned before and after instrumentation with special molds made to ensure the same areas at the point located 3 mm from the tips of the instruments using the FE-SEM. These scanned images were analyzed using the ImageJ. The arithmetical mean roughness (Ra), root mean square roughness (Rq), and the average distance between the highest peak and lowest valley in each sampling length (Rz) were calculated by ImageJ for quantitative analyses. The paired-t test was performed to analyze the data using the SPSS 22.0 at the significance of .05.ResultsAlmost all surface roughness values were decreased. However, these decreases were not statistically significant (P > .05).ConclusionsThe FE-SEM combined with the ImageJ was the reliable and appropriate modality for measurement surface roughness of instruments.

Morphologic Changes of Apical Foramen and Microcrack Formation after Foraminal Enlargement: A Scanning Electron Microscopic and Micro–computed Tomographic Analysis

IntroductionThe aim of the present study was to evaluate the morphologic changes on the apical foramen and the formation of dentinal microcracks after foraminal enlargement in straight and curved root canals using scanning electron microscopic (SEM) and micro–computed tomographic (micro-CT) analyses. MethodsSixty teeth were selected and divided into 2 experimental groups: GI (incisors/straight group, n = 30) and GM (molars/curved group, n = 30). Each group was divided into 2 subgroups (n = 15) according to the analysis performed: SEM or micro-CT analysis. The incisors and mesiobuccal canal of molars were instrumented with Reciproc Blue R25 instruments (VDW, Munich, Germany) using standardized shaping procedures in the apical foramen and 1 mm beyond. The occurrence of foraminal deformation was analyzed by scanning electron microscopy. The z test was used for statistical analysis (P < .05). Micro-CT imaging was used to observe the presence of microcracks in the root apical third. Afterward, pre- and postoperative cross-sectional images were screened to identify the presence of dentinal defects. ResultsThe curvature of the canal did not influence the occurrence of foraminal deformation either for instrumentation in the foramen or for instrumentation beyond the foramen (P > .05). It was also observed that the increase in the working length did not influence the appearance of new deformations in the GI/SEM and GM-SEM groups (P > .05). Qualitative micro-CT analysis showed the presence of dentinal defects in 0.8% (112) and 1.5% (208) of the cross sections of incisors and molars, respectively, from a total of 13,987 slices. All dentinal defects identified in the analysis of any postoperative scans were already present in the corresponding preoperative images. Therefore, no new microcracks were observed after root canal preparation. ConclusionsThe preparation of straight and moderately curved root canals with Reciproc Blue, regardless of the working length, did not influence the occurrence of apical foramen deformations and did not cause the formation of dentinal microcracks.

Cyclic Fatigue Resistance of Multiused Reciproc Blue Instruments during Retreatment Procedure

IntroductionRoot canal retreatment procedure may reduce the mechanical resistance of nickel-titanium instruments and increase the frequency of instrument fracture. The aim of the present study was to evaluate the effect of multiuse of Reciproc Blue R25 instruments on cyclic fatigue resistance during retreatment procedure in mandibular molar teeth. MethodsForty-eight Reciproc Blue R25 files were included in the study. In control group, 12 new Reciproc Blue R25 instruments were subjected to cyclic fatigue test by using a stainless steel artificial canal with a 90° angle and 3-mm radius of curvatures. In experimental groups, Reciproc Blue R25 files (n = 12) were used to remove the root canal filling (RCF) material of 1, 2, and 3 molar teeth, respectively. Then cyclic fatigue tests of these 36 instruments were performed. The number of cycles to fracture (NCF) and the length of the fractured fragment were calculated for each instrument. Working time for retreatment procedures was determined in seconds with a digital chronometer. The data were analyzed by using one-way analysis of variance followed by post hoc Tukey test and mixed-effect analysis (P = .05). ResultsNo significant difference was found between NCF values of new and first time used files (P > .05), but NCF values of new and first time used files were significantly higher than those of second and third time used files (P < .05). The second and third time used files revealed no difference (P > .05). As the number of uses increased, the average time for retreatment procedure statistically extended (P < .05). ConclusionsReciproc Blue R25 instrument can be used to remove RCF material of 2 molar teeth. However, because of its decreased NCF values, multiple use over 2 molars may not be suggested.

Torsional behaviour of Reciproc and Reciproc blue instruments associated with their martensitic transformation temperatures.

To compare the martensitic transformation temperatures and torsional resistance behaviour of classic M-Wire Reciproc and Reciproc blue files (VDW, Munich, Germany). M-Wire classic Reciproc R25 and Reciproc blue R25 instruments were used. Transformation temperatures were determined by differential scanning calorimetry (DSC-DSC 60, Shimadzu, Kyoto, Japan). Three samples with approximately 20mg of each system were cooled to -120°C and then heated to 100°C and then cooled to -100°C at a rate of 10°Cmin-1 . The maximum torque values and angular deflection until fracture of new instruments (n=10) were measured according to ISO 3630-1. Results were analysed statistically using the Student's t-test at a significance level of P<0.05. DSC results revealed the absence of martensitic transformation for Reciproc instruments in the temperature range analysed. In both systems, the instruments were composed of a mixture of R-phase and austenite at room temperature. After torsional tests, Reciproc blue had significantly lower values for mean maximum torque at rupture (P<0.05), although the angular deflection values were significantly higher than the Reciproc classic group (P<0.05). Both Reciproc and Reciproc blue instruments were composed of a mixture of R-phase and austenite. Reciproc Blue instruments had a greater angle of rotation to fracture but a lower torque to failure than M-Wire Reciproc instruments.

Performance of Reciproc Blue R25 Instruments in Shaping the Canal Space without Glide Path

IntroductionThis study assessed the frequency in which Reciproc Blue R25 instruments (VDW, Munich, Germany) reached the full working length (WL) of mandibular molar canals without a glide path. The influence of the type of electric motor (ie, conventional corded or cordless) on the instrument's performance was also assessed. MethodsOne hundred mandibular molars with slight to moderate root canals were selected and randomly assigned into 1 of 2 experimental groups according to the type of electric motor used: conventional corded (VDW Silver, VDW) or cordless motors (VDW.CONNECT Drive, VDW). Therefore, 50 molars and 154 root canals were selected for each motor. Reciproc Blue R25 instruments were used until reaching two thirds of the estimated WL. Then, a size 10 K-file was passively inserted to determine the full WL. No active instrumentation movement was performed with a size 10 K-file. Independently, whether a size 10 K-file reached the apex or not, Reciproc Blue R25 instruments were used to complete canal preparation. When the Reciproc Blue R25 instrument was able to reach the full WL, the case was classified as “reaching the full working length” (RFWL). If the instrument was not able to reach the full WL, the case was classified as “not reaching the full working length” (NRFWL). The chi-square test of goodness of fit was used to verify whether the observed frequencies of RFWL and NRFWL adhered to the expected ones. A 5% cutoff level of significance was considered for statistical assumptions. ResultsReciproc Blue R25 instruments were able to reach the full WL in 304 root canals (98.70%). The chi-square test revealed the observed frequencies of RFWL and NRFWL to be significantly different from the expected frequencies (χ2 = 292,208, P = .000). The frequency of RFWL and NRFWL was exactly the same for both types of electric motors. No instrument fractured, and a single file deformed. In 50 of 308 root canals, a size 10 K-file was unable to passively reach the full WL. From these 50 canals, Reciproc Blue R25 instruments were able to reach the full WL in 47 of them. ConclusionsReciproc Blue R25 instruments were able to reach the full WL in a high frequency of cases. The type of electric motor used did not interfere in the frequency of RFWL cases. No instrument fractured, and a single file deformed.

Cyclic fatigue of Reciproc Blue and Reciproc instruments exposed to intracanal temperature in simulated severe apical curvature.

The aim of this study was to evaluate the cyclic fatigue resistance of Reciproc and Reciproc Blue by testing in a severe apical curvature at intracanal temperature. Eighteen Reciproc R25 (25.08) and Reciproc Blue (25.08) instruments were tested in a cyclic fatigue device at body temperature (37°C) using a stainless steel block with an artificial canal with a curvature angle of 90° and radius of curvature of 2mm. The number of cycles to fracture (NCF) was calculated. The instruments were examined by differential scanning calorimetry (DSC). The data were analyzed using both Student's t tests and Weibull analysis. The NCF values of Reciproc R25 were significantly lower than Reciproc Blue R25 (P <0.05). There was no significant difference between the instruments regarding the length of fractured fragments (P >0.05). Reciproc Blue R25 instruments displayed significantly higher NCF than Reciproc R25. This study reported that novel reciprocating blue wire instruments exhibited higher cyclic fatigue resistance than its precedence M-wire instrument when tested in severely curvatured canals.

The impact of using a pneumatic contra-angle device on the lifespan of M-Wire- and Blue-treated instruments.

To evaluate the cyclic fatigue resistance of Reciproc M-Wire R25 (VDW, Munich, Germany) and Reciproc R25 Blue instruments (VDW) driven by Direct® (VDW) contra-angle connected to an ordinary an air-driven motor or an electric motor and compare the results with those obtained by the Reciproc M-Wire R25 or Reciproc Blue R25 instruments driven by an electric torque-controlled motor using "RECIPROC ALL" preset program. Thirty Reciproc M-Wire R25 (25/0.08v) and 30 Reciproc Blue R25 (25/0.08v) instruments were used. Cyclic fatigue resistance was tested measuring the time to fracture and the number of cycles to fracture in an artificial stainless-steel canal with a 60° angle and a 5-mm radius of curvature. The Reciproc M-Wire and Reciproc Blue instruments were activated with a 6:1 reduction handpiece powered by a torque-controlled motor using "RECIPROC ALL" preset program, with Reciproc Direct® contra-angle powered by an ordinary air-driven motor or with Direct® contra-angle powered by an electric motor (n = 10). The fracture surface of all fragments was examined with a scanning electron microscope. The results were statistically analyzed using Student's t test and one-way ANOVA at a significance level of P < 0.05. Cyclic fatigue life and number of cycles to fracture were significantly higher for Reciproc Blue instruments than for Reciproc M-Wire instruments regardless of the activation mode (P < 0.05). Instruments driven by Direct® contra-angle powered by an electric or by an ordinary air-driven motor revealed significantly longer cyclic fatigue life and number of cycles to fracture than instruments driven by an electric torque-controlled motor using "RECIPROC ALL" preset program (P < 0.05). Reciproc Blue instruments showed improved performance regarding fatigue resistance when compared to Reciproc M-Wire instruments. Instruments driven by Reciproc Direct® contra-angle showed higher cyclic fatigue life and number of cycles to fracture than instruments driven by an electric torque-controlled motor. Recently, Reciproc Direct®, the world's first contra-angle handpiece with integrated reciprocating motion, has been launched in endodontic market. The present study showed improved cyclic fatigue life of endodontic instruments when activated by Reciproc Direct®.

Torsional Fatigue Resistance of Blue-treated Reciprocating Instruments

IntroductionThe aim of the present study was to evaluate the influence of blue thermal treatment on the torsional resistance behavior of M-Wire Reciproc files (VDW, Munich, Germany). MethodsTen M-Wire Reciproc R25 (25/0.08v) and 10 Reciproc Blue R25 (25/0.08v, VDW) instruments were used. The torque and angle of rotation at failure of new instruments (n = 10) were measured according to ISO 3630-1. Three millimeters of each instrument tip was clamped to a small load cell by a lever arm linked to the torsion axis. The fracture surface of all fragments was examined with a scanning electron microscope. Results were statistically analyzed using the Student t test at a significance level of P < .05. ResultsThe maximum torsional strength of M-Wire Reciproc was higher than Reciproc Blue instruments (P < .05). Reciproc Blue instruments showed significantly higher angular rotation to fracture than M-Wire Reciproc instruments (P < .05). Scanning electron microscopy of the fracture surface showed similar and typical features of torsional failure for the 2 types of instruments, including concentric abrasion marks and the fibrous dimple marks at the center of rotation. ConclusionsReciproc Blue instruments showed a higher angle of rotation to fracture but a lower torque to failure than M-Wire Reciproc instruments.

Comparison of the shaping ability of novel thermally treated reciprocating instruments.

ObjectivesThe present study aimed to evaluate the shaping ability of 2 thermally treated nickel-titanium reciprocating systems in simulated curved canals.Materials and MethodsForty simulated canals were prepared to apical size 25 using Reciproc Blue R25 (VDW) and WaveOne Gold Primary (Dentsply Sirona) instruments. Standard pre- and post-preparation images were taken and superimposed. The removal of resin material was measured at 5 standard points: the canal orifice, halfway between the canal orifice and the beginning of the curve, the beginning of the curve, the apex of the curve, and the end-point of the simulated canal. The data were analysed using the independent sample t-test with a 5% significance threshold.ResultsThe canals in which Reciproc Blue R25 was used showed a significantly greater widening than those in which WaveOne Gold was used at 4 of the 5 measurement points (p < 0.05). The Reciproc Blue R25 instrument removed significantly more resin from the inner aspect of the curve at 2 of the 5 points and similar amounts at the remaining 3 points. At the 2 apical points, there was no significant difference between the Reciproc Blue R25 and WaveOne Gold Primary instruments.ConclusionBoth instruments respected the original canal anatomy; however, WaveOne Gold resulted in a more conservative shape with less transportation.