Rechargeable Zn-air Batteries Research Articles

Oxygen-bridging Fe, Co dual-metal dimers boost reversible oxygen electrocatalysis for rechargeable Zn–air batteries

Rechargeable zinc-air batteries (ZABs) are regarded as a remarkably promising alternative to current lithium-ion batteries, addressing the requirements for large-scale high-energy storage. Nevertheless, the sluggish kinetics involving oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) hamper the widespread application of ZABs, necessitating the development of high-efficiency and durable bifunctional electrocatalysts. Here, we report oxygen atom-bridged Fe, Co dual-metal dimers (FeOCo-SAD), in which the active site Fe-O-Co-N6 moiety boosts exceptional reversible activity toward ORR and OER in alkaline electrolytes. Specifically, FeOCo-SAD achieves a half-wave potential (E1/2) of 0.87 V for ORR and an overpotential of 310 mV at a current density of 10 mA cm-2 for OER, with a potential gap (ΔE) of only 0.67 V. Meanwhile, FeOCo-SAD manifests high performance with a peak power density of 241.24 mW cm-2 in realistic rechargeable ZABs. Theoretical calculations demonstrate that the introduction of an oxygen bridge in the Fe, Co dimer induced charge spatial redistribution around Fe and Co atoms. This enhances the activation of oxygen and optimizes the adsorption/desorption dynamics of reaction intermediates. Consequently, energy barriers are effectively reduced, leading to a strong promotion of intrinsic activity toward ORR and OER. This work suggests that oxygen-bridging dual-metal dimers offer promising prospects for significantly enhancing the performance of reversible oxygen electrocatalysis and for creating innovative catalysts that exhibit synergistic effects and electronic states.

Advancements in Rechargeable Zn-Air Batteries with Transition-Metal Dichalcogenides as Bifunctional Electrocatalyst.

Zinc-air batteries are promising energy storage devices owing to their high energy density, low cost, and environmental friendliness. However, the development of durable and efficient bifunctional electrocatalysts is a major concern for Zn-air batteries. In this review, we summarize the recent progress on transition metal dichalcogenides (TMDs) as bifunctional electrocatalysts for Zn-air batteries. We discuss the advantages of TMDs, such as high activity, good stability, and tunable electronic structure, as well as the challenges, such as low conductivity, poor durability, and limited active sites. We also highlight the strategies for fine-tuning the properties of TMDs, such as defect engineering, doping, hybridization, and structural engineering, to enhance their catalytic performance and stability. We provide a comprehensive and in-depth analysis of the applications of TMDs in Zn-air batteries, demonstrating their potential as low-cost, abundant, and environmentally friendly alternatives to noble metal catalysts. We also suggest future directions like exploring new TMDs materials and compositions, developing novel synthesis and modification techniques, investigating the interfacial interactions and charge transfer processes, and integrating TMDs with other functional materials. This review aims to illuminate the path forward for the development of efficient and durable Zn-air batteries, aligning with the broader objectives of sustainable energy solutions.

High-Performance Bifunctional Electrocatalysts for Flexible and Rechargeable Zn-Air Batteries: Recent Advances.

Flexible rechargeable Zn-air batteries (FZABs) exhibit high energy density, ultra-thin, lightweight, green, and safe features, and are considered as one of the ideal power sources for flexible wearable electronics. However, the slow and high overpotential oxygen reaction at the air cathode has become one of the key factors restricting the development of FZABs. The improvement of activity and stability of bifunctional catalysts has become a top priority. At the same time, FZABs should maintain the battery performance under different bending and twisting conditions, and the design of the overall structure of FZABs is also important. Based on the understanding of the three typical configurations and working principles of FZABs, this work highlights two common strategies for applying bifunctional catalysts to FZABs: 1) powder-based flexible air cathode and 2) flexible self-supported air cathode. It summarizes the recent advances in bifunctional oxygen electrocatalysts and explores the various types of catalyst structures as well as the related mechanistic understanding. Based on the latest catalyst research advances, this paper introduces and discusses various structure modulation strategies and expects to guide the synthesis and preparation of efficient bifunctional catalysts. Finally, the current status and challenges of bifunctional catalyst research in FZABs are summarized.

Carbonized wood fiber-supported S, N-codoped carbon layer-coated multinary metal sulfide nanoarchitecture for efficient oxygen evolution reaction at ampere-level current density

Multinary metal sulfides (MMSs) are highly suitable candidates for the application of electrocatalysis as they offer numerous parameters for optimizing the electronic structure and catalytic sites. Herein, a stable nanoarchitecture consisting of MMSs ((NiCoCrMnFe)Sx) nanoparticles embedded in S, N-codoped carbon (SNC) layers derived from metal organic framework (MOF) and supported on carbonized wood fibers (CWF) was fabricated by directly carbonization. Benefiting from this carbon-coated configuration, along with the synergistic effects within multinary metal systems, (NiCoCrMnFe)Sx@SNC/CWF delivers an exceptionally low overpotential of 260 mV at a high current density of 1000 mA cm−2, a small Tafel slope of 48.5 mV dec−1, and robust electrocatalytic stability. Furthermore, the (NiCoCrMnFe)Sx@SNC/ CWF used as the cathode of rechargeable Zn-air batteries demonstrates higher power density and remarkable durability, surpassing that of commercial RuO2. Thus, we showcase the feasibility and advantages of employing highly efficient and durable MMSs materials for low-cost and sustainable energy conversion.

Carboxymethyl Cellulose – Polyvinyl Alcohol Composite-Based Gel Polymer Electrolyte for Rechargeable Zn-Air Batteries

The high ionic conductivity, lower interfacial contact resistance, enhanced safety, non-toxicity, and biodegradability bring the gel polymer electrolytes (GPEs) as a prospective electrolyte for applications in high-energy density flexible Zn-air batteries (ZABs). The present study comprehensively optimizes the procedures to obtain carboxymethyl cellulose (CMC)–polyvinyl alcohol (PVA) composite-based GPEs holding a maximum KOH amount in the polymer matrix. Optimization of the GPE has been performed and demonstrated by an in-house-developed rechargeable ZAB cells using MnO2-based air cathode and Zn anode. The optimization parameters include the ratio of PVA:CMC, concentration of PVA-CMC in DI water, and thickness of the gel polymer electrolyte. Results show that a 4mm thick GPE prepared from a polymer membrane synthesized using PVA:CMC ratio of 5:2 at a concentration of 0.063 g ml−1 in DI water displayed the highest 6M KOH uptake, least charge transfer resistance of the device, higher discharge plateau, and 5–6 times more cycling compared to GPE made of PVA only. The “as-synthesized GPE” demonstrates high stability of GPE over 100h for a Zn-air battery device. The findings of this work shall speed up the development of Zn air batteries for applications as energy storage systems.

Facilitating charge transfer via a Semi-Coherent Fe(PO3)2-Co2P2O7 heterointerface for highly efficient Zn-Air batteries

Developing reversible oxygen electrodes for both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is crucial for achieving high-performance rechargeable Zn-air batteries (ZABs). This study introduced an nitrogen-doped carbon confined with a semi-coherent Fe(PO3)2-Co2P2O7 heterojunction for bifunctional oxygen electrocatalysis. This nanocomposite yielded an ORR half-wave potential of 0.908 V and an OER overpotential of 291 mV at 10 mA/cm2. ZABs incorporating this catalyst yielded impressive performance, including a peak power density of 203 mW/cm2, a specific capacity of 737 mAh/gZn, and promoted stability. Both experimental and theoretical simulations demonstrated that the unique electric field between Fe(PO3)2 and Co2P2O7 promoted efficient charge transport across the heterointerface. This interaction likely modulated the d-band center of the heterojunction, expedite the desorption of oxygen intermediates, thus improving oxygen catalysis and, consequently, ZAB performance. This work illustrates a significant design principle for creating efficient bifunctional catalysts in energy conversion technologies.

Interfaces engineering of heterostructured NiCoP/NiFe LDH@CC for attaining high catalytic activity in long-lasting rechargeable Zn–air batteries

Interfaces engineering of heterostructured NiCoP/NiFe LDH@CC for attaining high catalytic activity in long-lasting rechargeable Zn–air batteries

Self-Powered Electrochemical CO2 Conversion Enabled by a Multifunctional Carbon-Based Electrocatalyst and a Rechargeable Zn-Air Battery.

Multifunctional electrocatalysts are required for diverse clean energy-related technologies (e.g., electrochemical CO2 reduction reaction (CO2RR) and metal-air batteries). Herein, a nitrogen and fluorine co-doped carbon nanotube (NFCNT) is reported to simultaneously achieve multifunctional catalytic activities for CO2RR, oxygen reduction reaction (ORR), and oxygen evolution reaction (OER). Theoretical calculations reveal that the superior multifunctional catalytic activities of NFCNT are attributed to the synergistic effect of nitrogen and fluorine co-doping to induce charge redistribution and decrease the energy barrier of rate-determining step for different electrocatalytic reactions. Furthermore, the rechargeable Zn-air battery (ZAB) with NFCNT electrode delivers a high peak power density of 230mWcm-2 and superior durability over 100 cycles, outperforming the ZAB with Pt/C+RuO2 based electrodes. More importantly, a self-driven CO2 electrolysis unit powered by the as-assembled ZABs is developed, which achieves 80% CO Faraday efficiency and 60% total energy efficiency. This work provides a new insight into the exploration of highly efficient multifunctional carbon-based electrocatalysts for novel energy-related applications.

Precisely Constructing Orbital-Coupled Fe─Co Dual-atom Sites for High-Energy-Efficiency Zn-Air/Iodide Hybrid Batteries.

Rechargeable Zn-air batteries (ZABs) are promising for energy storage and conversion. However, the high charging voltage and low energy efficiency hinder their commercialization. Herein, these challenges are addressed by employing precisely constructed multifunctional Fe-Co diatomic site catalysts (FeCo-DACs) and integrating iodide/iodate redox into ZABs to create Zinc-air/iodide hybrid batteries (ZAIHBs) with highly efficient multifunctional catalyst. The strong coupling between the 3d orbitals of Fe and Co weakens the excessively strong binding strength between active sites and intermediates, enhancing the catalytic activities for oxygen reduction/evolution reaction and iodide/iodate redox. Consequently, FeCo-DACs exhibit outstanding bifunctional oxygen catalytic activity with a small potential gap (ΔE=0.66V) and outstanding stability. Moreover, an outstanding catalytic performance toward iodide/iodate redox is obtained. Therefore, FeCo-DAC-based ZAIHBs exhibit high energy efficiency of up to 75% at 10mAcm-2 and excellent cycling stability (72% after 500h). This research offers critical insights into the rational design of DACs and paves the way for high-energy efficiency energy storage devices.

Hydrothermal synthesis of high-performance cobalt phosphate nanorod architecture as bifunctional electrocatalysts for rechargeable Zn-air batteries and supercapatteries

Transition metal phosphate bifunctional electrocatalysts demonstrate superior oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and capacitive properties owing to their high electrocatalytic and conductive activities. In this report, cobalt phosphate (Co3P2O8) nanorod (NR) electrocatalytic materials were developed via a facile one-step hydrothermal synthesis, followed by an annealing process. The unique NR structures offer superior electrocatalytic activities, continuous and quick electron transport pathways, short ion diffusion lengths, and rich active sites toward rechargeable zinc-air batteries (ZABs) and supercapatteries (SCs). The self-assembled Co3P2O8 NR electrocatalyst revealed higher current density values during the OER and ORR measurements than the commercially available Pt/C and IrO2 materials. The Co3P2O8 NR electrocatalyst exhibited an excellent OER overpotential of 180 mV. The electocatalyst also showed superior onset and half-wave potentials of 0.92 V and 0.80 V, respectively. Moreover, the fabricated Co3P2O8 NRs-based ZAB exhibited better durability than the Pt/C-based ZAB. Significantly, the Co3P2O8 NR electrode demonstrated an excellent specific capacity of 373 mAh g−1 with outstanding cycling stability of 99% after 5000 cycles. Additionally, the fabricated Co3P2O8 NRs//activated carbon SC demonstrated high specific energy and power densities of 25.62 Wh kg−1 and 2953.12 W kg−1, respectively with remarkable cycling stability of 89% after 7000 cycles. Specifically, the practical applicability of the fabricated Co3P2O8 NRs-based ZAB and SC was tested using a blue light-emitting diode nameplate energized by two devices in series. Overall, the catalytic and energy-storage properties of the Co3P2O8 NR material can provide a new pathway for high-energy electrochemical applications.

Rechargeable zinc-air battery with bifunctional electrocatalyst of copper oxide and graphene nanoplatelets

Rechargeable zinc-air batteries have been identified as promising technologies for energy storage. However, developing cost-effective electrocatalysts that can efficiently facilitate the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is crucial for their advancement. This work investigates synthesized electrocatalysts composed of graphene-Cu2O deposited on carbon cloth by doctor blading casting method as bifunctional electrodes in a rechargeable Zn-air battery. The battery integrated with graphene-Cu2O as the air-cathode electrocatalyst showed superior performance in terms of cycling stability compared to that without Cu2O. This enhanced performance is attributed to the reversibility of Cu+/Cu2+ species during the redox reactions facilitated by the high electrical conductivity of graphene. Therefore, the results suggest the potential of the synthesized electrodes for advancing the development of rechargeable Zn-air batteries.

Guanine-derived core-shell FeCo alloy confined in graphene-like N-doped carbon as efficient bifunctional oxygen electrocatalysts for rechargeable Zn-air batteries

Maximization the synergistic effect of each component in transition metal-carbon complexes is expected to improve the bifunctional oxygen electrocatalysis for rechargeable Zn-air batteries but is still challenging. Herein, nucleobase guanine is employed as a supramolecular precursor to generate the core (FeCo alloy)-shell (carbon) structure embedded in ultrathin graphene-like nitrogen-doped carbon nanosheets (FeCo@NCNSs) via a confinement pyrolysis strategy. Thanks to the generated core-shell structure and bimetallic synergistic effect, the as-prepared FeCo@NCNSs exhibits excellent electrochemical performance in both oxygen reduction reaction and oxygen evolution reaction. As a result, when served as the bifunctional air electrode for a practical Zn-air battery, FeCo@NCNSs exhibits a higher open-circuit voltage (1.553 V) and peak power density (197.30 mW cm−2), as well as the greatly improved long-term cyclic stability compared to the noble metal benchmarks. This work provides a promising approach to integrate various active sites for bifunctional oxygen electrocatalysis and inspires the exploration of simple but efficient electrocatalysts for energy storage and conversion.

General and Facile Synthesis of Co/CoO Nanoparticals Supported by Nitrogen-Doped Graphenic Networks as Efficient Oxygen Electrocatalyst for Zn-Air Batteries.

Reasonable design of low-cost, high-efficiency and stable bifunctional oxygen electrocatalysts is of great significance to improve the reaction efficiency of Zn-air batteries, which is still a huge challenge. Here, we report a highly efficient bifunctional oxygen electrocatalyst with three-dimensional (3D) N-doped graphene network-supported cobalt and cobalt oxide nanoparticles (Co/CoO-NG), which can be in situ synthesized by inducing metal ions on metal plates via graphene oxide as an inducer. This 3D network structure and open active center show excellent bifunctional oxygen electrocatalytic activity under alkaline conditions, and can be used as an air electrode in rechargeable Zn-air batteries, with significantly better power density (244.28 mW cm-2) and stability (over 340 h) than commercial Pt/C+RuO2 mixtures. This work is conducive to advancing the practical application of graphene-based materials as air electrodes for rechargeable zinc-air batteries.

RuSe2 and CoSe2 Nanoparticles Incorporated Nitrogen-Doped Carbon as Efficient Trifunctional Electrocatalyst for Zinc-Air Batteries and Water Splitting.

The development of affordable, highly active, and stable trifunctional electrocatalysts is imperative for sustainable energy applications such as overall water splitting and rechargeable Zn-air battery. Herein, we report a composite electrocatalyst with RuSe2 and CoSe2 hybrid nanoparticles embedded in nitrogen-doped carbon (RuSe2CoSe2/NC) synthesized through a carbonization-adsorption-selenylation strategy. This electrocatalyst is a trifunctional electrocatalyst with excellent hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) activities. An in-depth study of the effect of Se on the electrocatalytic process was conducted. Notably, the incorporation of Se moderately adjusted electronic structure of Ru and Co, enhancing all three types of catalytic performance (HER, η10 = 31 mV; OER, η10 = 248 mV; ORR, E1/2 = 0.834 V) under alkaline condition with accelerated kinetics and improved stability. Density functional theory (DFT) calculation reveals that the (210) crystal facet of RuSe2 is the dominant HER active site as it exhibited the lowest ΔGH* value. The in situ Raman spectra unravel the evolution process of the local electronic environment of Co-Se and Ru-Se bonds, which synergistically promotes the formation of CoOOH as the active intermediate during the OER. The superior catalytic efficiency and remarkable durability of RuSe2CoSe2/NC as an electrode for water splitting and zinc-air battery devices demonstrate its great potential for energy storage and conversion devices.

MIL-101(Fe)-derivatized cathode as an efficient oxygen electrocatalyst for rechargeable Zn-air battery

The exploration of multifunctional electrocatalysts with cost-effective and high kinetic activity for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is crucial for the development of advanced energy conversion and storage equipment. Herein, a novel hierarchical mesoporous/macropores MIL-101(Fe) derivative carbon catalyst material was prepared by a simple molten ZnCl2-assisted synthesis route. Specifically, 1H-benzotriazole (BTA) organic ligands were intentionally introduced as nitrogen sources in order to induce the formation of charge-rich regions through an electronegative nitrogen doping control strategy, and most importantly, the lone pair electron-rich nature of element N could facilitate the separation and anchoring of iron species enchanted the utilization rate of active sites. Because of these properties, the as-prepared catalyst (denoted as FeSACs/NxC) possesses unrivalled bifunction electrocatalytic activity and durability for the ORR and OER. The FeSACs/N1.25C as working electrode exhibits a quite satisfactory electrochemical performance for the ORR (half-wave potential of 0.82 V) and OER (a small overpotential of 302 mV at 10 mA cm−2) in the classic three-electrode configuration. Moreover, the FeSACs/N1.25C-based air cathode imparts encouraging performance in a rechargeable Zn–air battery prototype with an open-circuit voltage of 1.45 V, a specific capacity of 792.16 mAh g−1, an energy density of 871.38 Wh kg−1, and excellent stability for 120 h. This work has opened the way for the development of low-cost, fast kinetic and stable non-noble metal multifunctional catalysts.

Covalent organic frameworks derived Single-Atom cobalt catalysts for boosting oxygen reduction reaction in rechargeable Zn-Air batteries

The design and development of high-performance and long-life Pt-free catalysts for the oxygen reduction reaction (ORR) is of great important with respect to metal-air batteries and fuel cells. Herein, a new low-cost covalent organic frameworks (COFs)-derived CoNC single-atoms catalyst (SAC) is fabricated and compared with the engineered nanoparticle (NP) counterpart for ORR activity. The ORR performance of the SAC catalyst (CoSA@NC) surpasses the NP counterpart (CoNP-NC) under the same operation condition. CoSA@NC also achieves improved long-term durability and better methanol tolerance compared with the Pt/C. The zinc-air battery assembled by the CoSA@NC cathode delivers a higher power density and energy density than that of commercial Pt/C catalyst. Molecular dynamics (MD) is performed to explain the spontaneous evolution from clusters to single-atom metal configuration and density functional theory (DFT) calculations find that CoSA@NC possesses lower d-band center, resulting in weaker interaction between the surface and the O-containing intermediates. Consequently, the reductive desorption of OH*, the rate-determine step, is further accelerated.

Coal-based carbon nanosheets contained carbon microfibers modified with grown carbon nanotubes as efficient air electrode material for rechargeable zinc-air batteries

Coal-based oxygen electrocatalysts hold immense promise for cost-effective applications in rechargeable Zn-air batteries (ZABs) and the value-added, clean utilization of traditional coal resources. Herein, an electrospun membrane electrode comprising coal-derived carbon nanosheets and directly grown carbon nanotubes (CNS/CMF@CNT) was successfully synthesized. The hierarchical porous structure of the electrode, composed of multiple components, significantly facilitates mass and ion transportation, resulting in exceptional electrochemical performance. Employing Fe as the catalyst for CNT growth, the CNS/CMF@CNT electrode exhibits a remarkable onset potential of 0.96 V and a half-wave potential of 0.87 V in the oxygen reduction reaction (ORR). In-situ surface-enhanced Raman spectroscopy reveals that hydroxyl radical desorption on the surface of CNS/CMF@CNT(Fe) is the rate-determining step of the ORR. Notably, the aqueous ZAB featuring the CNS/CMF@CNT(Fe) electrode achieved a peak power density of 216.0 mW cm−2 at a current density of 414 mA cm−2 and maintained a voltage efficiency of 65.1 % after 2000 charge/discharge cycles at 5 mA cm−2. Furthermore, the all-solid-state ZAB incorporating this electrode displayed an open-circuit voltage of 1.43 V, a peak power density of 70.1 mW cm−2 at a current density of 110 mA cm−2, and a voltage efficiency of 66.5 % after 150 charge/discharge cycles. The utilization of abundant coal as the raw material for electrode fabrication not only brings conceivable economic benefits in ZAB construction, but also commendably advances the effective application of traditional coal resources in a more sustainable manner.

Asymmetrical anchor way of manganese atoms on carbon domain edge for enhanced oxygen reduction reaction

Single atomic catalysts (SACs), especially the catalysts featured by well-developed M-N4 moieties, show excellent catalytic activity and spark enormous attention. However, the highly symmetric active sites may result in some degenerate electronic states for the d orbitals of the center metal atom, which suffer from the unsatisfactory adsorption-desorption behaviors during reaction. Herein, we develop an asymmetric anchor site by two types of nitrogen (sp-N and pyridinic N) created in the inherent edge-rich carbon domain of hydrogen-substituted graphdiyne (HsGDY), where atomic catalyst like manganese atoms can be asymmetrically anchored on the one side of hexagon carbon rings. The abundant elegant hexagon carbon rings on HsGDY not only facilitate the creation of edge sites, but also provide available space for the coordination of terminal ligands (OH) with Mn atoms. The as-synthesized Mn-N-HsGDY exhibits excellent ORR activity and an impressive long-term cyclability for over 3800 cycles in a rechargeable Zn-air battery.

FeNi alloy embedded in three-dimensional nitrogen-doped porous carbon as bifunctional oxygen electrocatalysts for rechargeable Zn-air batteries

Iron‑nickel (FeNi) alloy is one of the efficient bifunctional oxygen electrocatalysts for zinc-air batteries (ZABs). However, FeNi alloy nanoparticles prepared by traditional synthesis strategies are easy to agglomerate and have non-uniform sizes, which is not conducive to the improvement of catalytic activity and stability. Here, we have successfully encapsulated two different kinds of nitrogen-rich metal phthalocyanines (MPcs) in situ doping in zeolitic imidazolate framework (ZIF-8) homogeneously by the “double solvents” method. The ligand nitrogen and macrocyclic structure of MPcs encapsulated in ZIF-8 not only helps metal dispersion and enhances the metal-ligand‑nitrogen (M-Nx) structure, but also enhances the graphitisation of three-dimensional (3D) porous carbon after pyrolysis. Thus, a FeNi alloy uniformly embedded in 3D nitrogen-doped porous carbon materials (FeNi@NC) was constructed in the subsequent pyrolysis process and used as an efficient bifunctional oxygen reduction/evolution (ORR/OER) electrocatalyst for rechargeable ZABs. Impressively, the FeNi@NC catalyst carries high half-wave potential (0.850 V) in ORR and the low overpotential (291 mV) in OER, significantly better than Pt/C (0.830 V) and RuO2 (307 mV), respectively. In addition, the rechargeable ZAB assembled with FeNi@NC air cathode has a specific capacity of 649 mW cm−2 and shows no significant degradation after 240 h of charging and discharging cycles. This study provides a new design idea for the manufacture of carbon-supported non-noble metal alloy catalysts with bifunctional oxygen catalytic activity, and verifies the feasibility of regulating the composition of non-noble metals to construct a rechargeable ZABs with excellent performance.

Bioinspired binary-site catalysts for novel urea-assisted Zn-air battery: A transfer station between renewable energy and hydrogen

The slow reaction kinetics of oxygen electrode is the bottleneck restricting the development of rechargeable Zn-air batteries (ZABs). In order to further improve the energy conversion efficiency of ZABs, a novel urea-assisted ZAB system was proposed by replacing oxygen evolution reaction (OER) with urea oxidation reaction (UOR) with lower theoretical thermodynamic potential. Inspired by nature’s ingenious structure-function, a “leaf-branch” CoNi@NCNTs-LDH/CC binary-site electrocatalyst was designed for the above system, where spatially separated branches and leaves serve as the main active sites for ORR and UOR, respectively. A build-in electric field from CoNi-LDH to CoNi@NCNTs is formed at the interface of the composite, which plays a command effect, effectively triggering the accumulation of O2 and urea reactants around the CoNi and LDH sites, respectively, and thus improving the efficiency of both ORR and UOR reactions. Based on that, a conceptual urea-assisted rechargeable ZAB is demonstrated to have significantly decreased charging voltage, higher energy conversion efficiency (74.6 %) compared with the conventional ZAB, as well as high urea elimination rates. Considering the urea-assisted ZAB with high energy conversion efficiency and wastewater treatment versatility as an energy transfer station applied in a high value-added agricultural system, uninterrupted hydrogen production and wastewater treatment of agricultural wastewater can be simultaneously achieved using sustainable energy sources.