Real-time Brain-computer Interface Research Articles

Real-time detection of spoken speech from unlabeled ECoG signals: A pilot study with an ALS participant.

Objective . Brain-Computer Interfaces (BCIs) hold significant promise for restoring communication in individuals with partial or complete loss of the ability to speak due to paralysis from amyotrophic lateral sclerosis (ALS), brainstem stroke, and other neurological disorders. Many of the approaches to speech decoding reported in the BCI literature have required time-aligned target representations to allow successful training - a major challenge when translating such approaches to people who have already lost their voice. Approach . In this pilot study, we made a first step toward scenarios in which no ground truth is available. We utilized a graph-based clustering approach to identify temporal segments of speech production from electrocorticographic (ECoG) signals alone. We then used the estimated speech segments to train a voice activity detection (VAD) model using only ECoG signals. We evaluated our approach using held-out open-loop recordings of a single dysarthric clinical trial participant living with ALS, and we compared the resulting performance to previous solutions trained with ground truth acoustic voice recordings. Main results . Our approach achieves a median error rate of around 0.5 seconds with respect to the actual spoken speech. Embedded into a real-time BCI, our approach is capable of providing VAD results with a latency of only 10 ms. Significance . To the best of our knowledge, our results show for the first time that speech activity can be predicted purely from unlabeled ECoG signals, a crucial step toward individuals who cannot provide this information anymore due to their neurological condition, such as patients with locked-in syndrome. Clinical Trial Information . ClinicalTrials.gov, registration number NCT03567213 .

Model and Data Dual-Driven Double-Point Observation Network for Ultra-Short MI EEG Classification.

Although deep networks have succeeded in various signal classification tasks, the time sequence samples used to train the deep models are usually required to reach a certain length. Especially, in brain computer interface (BCI) research, around 3.5s-long motor imagery (MI) Electroencephalography (EEG) samples are needed to obtain satisfactory classification performance. This time-span requirement of the training samples makes real-time MI BCI systems impossible to implement based on deep networks, which restricts the related researches within laboratory and makes practical application hard to accomplish. To address this issue, a double-point observation deep network (DoNet) is developed to classify ultra-short samples buried in noise. First, an analytical solution is developed theoretically to perform ultra-short signal classification based on double-point couples. Then, a signal-noise model is constructed to study the interference of noise on classification based on double-point couples. Based on which, an independent identical distribution condition is utilized to improve the classification accuracy in a data-driven manner. Combining the theoretical model and data-driven mechanism, DoNet can construct a steady data-distribution for the double-point couples of the samples with the same label. Therefore, the conditional probability of each double-point couple of a test sample can be obtained. With a voting strategy, the samples can be accurately classified by fusing these conditional probabilities. Meanwhile, the noise interference can be suppressed. DoNet has been evaluated on two public EEG datasets. Compared to most state-of-the-art methods, the 1s-long EEG signal classification accuracy has been improved by more than 3%.

Brain–Computer Interface Based on PLV-Spatial Filter and LSTM Classification for Intuitive Control of Avatars

This study researches the combination of the brain–computer interface (BCI) and virtual reality (VR) in order to improve user experience and facilitate control learning in a safe environment. In addition, it assesses the applicability of the phase-locking value spatial filtering (PLV-SF) method and the Short-Term Memory Network (LSTM) in a real-time EEG-based BCI. The PLV-SF has been shown to improve signal quality, and the LSTM exhibits more stable and accurate behavior. Ten healthy volunteers, six men and four women aged 22 to 37 years, participated in tasks inside a virtual house, using their EEG states to direct their movements and actions through a commercial, low-cost wireless EEG device together with a virtual reality system. A BCI and VR can be used effectively to enable the intuitive control of virtual environments by immersing users in real-life situations, making the experience engaging, fun, and safe. Control test times decreased significantly from 3.65 min and 7.79 min in the first and second quartiles, respectively, to 2.56 min and 4.28 min. In addition, a free route was performed for the three best volunteers who finished in an average time of 6.30 min.

Band power feature part-based convolutional neural network with African vulture optimization fostered channel selection for EEG classification

The electroencephalogram-based motor imagery (MI-EEG) classification task is significant for brain–computer interface (BCI). EEG signals need a lot of channels to be acquired, which makes it difficult to use in real-world applications. Choosing the optimal channel subset without severely impacting the classification performance is a problem in the field of BCI. To overwhelm this problem, a band power feature part-based convolutional neural network with African vulture optimization fostered channel selection for EEG classification (PCNNC-AVOACS-EEG) is proposed in this article. Initially, the input EEG signals are taken from BCI competition IV, dataset 1. Then the input EEG signals are pre-processed by contrast-limited adaptive histogram equalization filtering. These pre-processed EEG signals are extracted by hexadecimal local adaptive binary pattern (HLABP) method. This HLABP method extracts the features of alpha and beta bands from the EEG segments. Each EEG channel’s band power data are utilized as features for a PCNNC to exactly classify the EEG into 3 classes: two MI states and idle state. The AVOA is applied within the band power feature PCNNC for channel selection, wherein channel selection aids to enhance the categorization accuracy on test set that is a vital indicator for real-time BCI applications. The proposed method is activated in python. From the experiment, the proposed technique attains 17.91%, 20.46% and 18.146% higher accuracy; 14.105%, 15.295% and 5.291% higher area under the curve and 70%, 60% and 65.714% lower computation time compared with the existing approaches.

Development of real-time brain-computer interface control system for robot

Electroencephalogram (EEG)-based brain-computer interfaces (BCI) have been considered a prevailing non-invasive method for collecting human biomedical signals by attaching electrodes to the scalp. However, it is difficult to detect and use these signals to control an online BCI robot in a real environment owing to environmental noise. In this study, a novel state recognition model is proposed to determine and improve EEG signal states. First, a Long Short-Term Memory Convolutional Neural Network (LSTM-CNN) was designed to extract EEG features along the time sequence. During this process, errors caused by the randomness of the mind or external environmental factors may be generated. Thus, an actor-critic based decision-making model was proposed to correct these errors. The model consists of two networks that can be used to predict the final signal state based on both the current signal state probability and past signal state probabilities. Subsequently, a hybrid BCI real-time control system application is proposed to control a BCI robot. The Unicorn Hybrid Black EEG device was used to acquire brain signals. A data transmission system was constructed using OpenViBE to transfer data. An EEG classification system was built to classify the BCI commands. In this experiment, EEG data from five subjects were collected to train and test the performance and reliability of the proposed control system. The system records the time spent by the robot and the moving distance. Experimental results were provided to demonstrate the feasibility of the real-time control system. Compared to similar BCI studies, the proposed hybrid BCI real-time control system can accurately classify seven BCI commands in a more reliable and precise manner. Overall, the offline testing accuracy was 87.20%. When we apply the proposed system to control a BCI robot in a real environment, the average online control accuracy is 93.12%, and the mean information transmission rate is 67.07 bits/min, which is better than those of some state-of-the-art control systems. This shows that the proposed hybrid BCI real-time control system demonstrated higher reliability, which can be used in practical BCI control applications.

Automatic control of reactive brain computer interfaces

This article discusses theoretical and practical aspects of real-time brain computer interface control methods based on Bayesian statistics. The theoretical aspects include how the data from the brain computer interface can be translated into a Gaussian mixture model that is used in the Bayesian statistics-based control methods. The practical aspects include how the control methods improve the performance of the brain computer interface. We use a reactive brain computer interface based on a visual oddball paradigm for the investigation and improvement of the performance of automatic control and feedback algorithms used in the system. By using automatic control for selection of the stimuli for the visual oddball experiment, the target stimulus is identified faster than if no automatic control is used. Finally, we introduce transfer learning using Gaussian mixture models, enabling a ready-to-use setup.

Adaptive LDA Classifier Enhances Real-Time Control of an EEG Brain-Computer Interface for Decoding Imagined Syllables.

Brain-Computer Interfaces (BCIs) aim to establish a pathway between the brain and an external device without the involvement of the motor system, relying exclusively on neural signals. Such systems have the potential to provide a means of communication for patients who have lost the ability to speak due to a neurological disorder. Traditional methodologies for decoding imagined speech directly from brain signals often deploy static classifiers, that is, decoders that are computed once at the beginning of the experiment and remain unchanged throughout the BCI use. However, this approach might be inadequate to effectively handle the non-stationary nature of electroencephalography (EEG) signals and the learning that accompanies BCI use, as parameters are expected to change, and all the more in a real-time setting. To address this limitation, we developed an adaptive classifier that updates its parameters based on the incoming data in real time. We first identified optimal parameters (the update coefficient, UC) to be used in an adaptive Linear Discriminant Analysis (LDA) classifier, using a previously recorded EEG dataset, acquired while healthy participants controlled a binary BCI based on imagined syllable decoding. We subsequently tested the effectiveness of this optimization in a real-time BCI control setting. Twenty healthy participants performed two BCI control sessions based on the imagery of two syllables, using a static LDA and an adaptive LDA classifier, in randomized order. As hypothesized, the adaptive classifier led to better performances than the static one in this real-time BCI control task. Furthermore, the optimal parameters for the adaptive classifier were closely aligned in both datasets, acquired using the same syllable imagery task. These findings highlight the effectiveness and reliability of adaptive LDA classifiers for real-time imagined speech decoding. Such an improvement can shorten the training time and favor the development of multi-class BCIs, representing a clear interest for non-invasive systems notably characterized by low decoding accuracies.

Optimization of transfer learning based on source sample selection in Euclidean space for P300-based brain-computer interfaces.

Event-related potentials (ERPs), such as P300, are widely utilized for non-invasive monitoring of brain activity in brain-computer interfaces (BCIs) via electroencephalogram (EEG). However, the non-stationary nature of EEG signals and different data distributions among subjects create significant challenges for implementing real-time P300-based BCIs. This requires time-consuming calibration and a large number of training samples. To address these challenges, this study proposes a transfer learning-based approach that uses a convolutional neural network for high-level feature extraction, followed by Euclidean space data alignment to ensure similar distributions of extracted features. Furthermore, a source selection technique based on the Euclidean distance metric was applied to measure the distance between each source feature sample and a reference point from the target domain. The samples with the lowest distance were then chosen to increase the similarity between source and target datasets. Finally, the transferred features are applied to a discriminative restricted Boltzmann machine classifier for P300 detection. The proposed method was evaluated on the state-of-the-art BCI Competition III dataset II and rapid serial visual presentation dataset. The results demonstrate that the proposed technique achieves an average accuracy of 97% for both online and offline after 15 repetitions, which is comparable to the state-of-the-art methods. Notably, the proposed approach requires <½ of the training samples needed by previous studies. Therefore, this technique offers an efficient solution for developing ERP-based BCIs with robust performance against reduced a number of training data.

A - 175 EEG Phase Can be Predicted with Similar Accuracy across Cognitive States after Accounting for Power and SNR.

Electroencephalogram (EEG) phase can capture neural oscillation dynamics. Accordingly, EEG phase is a potential target for neurofeedback and brain-computer interfaces (BCIs). However, rigorous tests of the generalizability of real-time EEG phase are needed, requiring accurate phase estimates. We examined how cognitive states affect EEG phase prediction accuracy in the parieto-occipital alpha band. We identified datasets through public repositories. After preprocessing, we used the Educated Temporal Prediction Algorithm (ETP) to predict future peaks. We compared these predictions to the original signal, and defined accuracy from 0 to 100%. Our independent variable was cognitive state (eyes-open rest, eyes-closed rest, task), dependent variable was accuracy, and covariates were EEG instantaneous power and signal-to-noise ratio (SNR). We used a linear mixed-effects model, with random effects for dataset and individual. Across the 11 datasets, we had 543 participants and 1,641,074 predictions. There were no significant accuracy differences among the conditions (p < 1e-5), with a baseline accuracy of 59.07%. Power had an effect on accuracy, with a unit increase leading to a 13.1% increase in accuracy (p < 1e-5). SNR had an effect on accuracy, with an effect size of 0.46% (p < 1e-5), with a significant negative interaction with power with an effect size of -0.51% (p < 1e-5). Our results indicated that we could predict EEG phase accurately across cognitive conditions and datasets, with higher accuracy for high instantaneous band-power and SNR. Accordingly, real-time EEG phase experiments, closed-loop technologies, and BCIs should minimize external unwanted noise while targeting periods of high power, as opposed to manipulating experimental and cognitive conditions.

A novel framework for classification of two-class motor imagery EEG signals using logistic regression classification algorithm.

Robotics and artificial intelligence have played a significant role in developing assistive technologies for people with motor disabilities. Brain-Computer Interface (BCI) is a communication system that allows humans to communicate with their environment by detecting and quantifying control signals produced from different modalities and translating them into voluntary commands for actuating an external device. For that purpose, classification the brain signals with a very high accuracy and minimization of the errors is of profound importance to the researchers. So in this study, a novel framework has been proposed to classify the binary-class electroencephalogram (EEG) data. The proposed framework is tested on BCI Competition IV dataset 1 and BCI Competition III dataset 4a. Artifact removal from EEG data is done through preprocessing, followed by feature extraction for recognizing discriminative information in the recorded brain signals. Signal preprocessing involves the application of independent component analysis (ICA) on raw EEG data, accompanied by the employment of common spatial pattern (CSP) and log-variance for extracting useful features. Six different classification algorithms, namely support vector machine, linear discriminant analysis, k-nearest neighbor, naïve Bayes, decision trees, and logistic regression, have been compared to classify the EEG data accurately. The proposed framework achieved the best classification accuracies with logistic regression classifier for both datasets. Average classification accuracy of 90.42% has been attained on BCI Competition IV dataset 1 for seven different subjects, while for BCI Competition III dataset 4a, an average accuracy of 95.42% has been attained on five subjects. This indicates that the model can be used in real time BCI systems and provide extra-ordinary results for 2-class Motor Imagery (MI) signals classification applications and with some modifications this framework can also be made compatible for multi-class classification in the future.

Finger pinching and imagination classification: A fusion of CNN architectures for IoMT-enabled BCI applications

A Brain–Computer Interface (BCI), integrated with the Internet of Medical Things (IoMT) and based on electroencephalogram (EEG) technology, allows users to control external devices by decoding brainwave patterns. Advanced deep learning-based BCIs, especially those utilizing sensorimotor rhythms (SMRs), have emerged as direct brain–device communication facilitators. SMRs involve users imagining limb motions to induce specific brain activity changes in the motor cortex. Despite progress, some users struggle with BCIs due to weak signals, individual variability, and limited task applicability. This study introduces an unsupervised EEG preprocessing pipeline for SMR-based BCIs. It evaluates an EEG dataset recorded during finger movements, employing two cleaning methods: an investigator-dependent pipeline and our proposed unsupervised method. Two distinct feature datasets are generated: one from cleaned EEG data processed into spectrogram images using supervised preprocessing, and another from data cleaned using our proposed unsupervised pipeline. The study extensively assesses five transfer learning convolutional neural network (TL-CNN) models for distinguishing Motor Imagery (MI) from finger movements (Mex) using the generated datasets. A novel probability fusion technique is developed to enhance TL-CNN classification in Mex versus MI finger-pinching actions. Comparative results show that the fusion-based method outperforms other state-of-the-art methods when applied to unsupervised EEG data. Specifically, our proposed approach achieves 97.9% accuracy, 93.4% precision, 95% recall, and an F1-score of 93.2%, demonstrating significant progress in distinguishing MI and Mex activities through the use of our unsupervised pre-processing pipeline and fusion-based CNN method. Our findings demonstrate the potential of our approach to serve as a benchmark for the global interdisciplinary research community and enable the development of future more effective and user-friendly real-time BCI systems.

Toward consistency between humans and classifiers: Improved performance of a real-time brain–computer interface using a mutual learning system

Toward consistency between humans and classifiers: Improved performance of a real-time brain–computer interface using a mutual learning system

Combining brain-computer interfaces and multiplayer video games: an application based on c-VEPs.

Video games are crucial to the entertainment industry, nonetheless they can be challenging to access for those with severe motor disabilities. Brain-computer interfaces (BCI) systems have the potential to help these individuals by allowing them to control video games using their brain signals. Furthermore, multiplayer BCI-based video games may provide valuable insights into how competitiveness or motivation affects the control of these interfaces. Despite the recent advancement in the development of code-modulated visual evoked potentials (c-VEPs) as control signals for high-performance BCIs, to the best of our knowledge, no studies have been conducted to develop a BCI-driven video game utilizing c-VEPs. However, c-VEPs could enhance user experience as an alternative method. Thus, the main goal of this work was to design, develop, and evaluate a version of the well-known 'Connect 4' video game using a c-VEP-based BCI, allowing 2 users to compete by aligning 4 same-colored coins vertically, horizontally or diagonally. The proposed application consists of a multiplayer video game controlled by a real-time BCI system processing 2 electroencephalograms (EEGs) sequentially. To detect user intention, columns in which the coin can be placed was encoded with shifted versions of a pseudorandom binary code, following a traditional circular shifting c-VEP paradigm. To analyze the usability of our application, the experimental protocol comprised an evaluation session by 22 healthy users. Firstly, each user had to perform individual tasks. Afterward, users were matched and the application was used in competitive mode. This was done to assess the accuracy and speed of selection. On the other hand, qualitative data on satisfaction and usability were collected through questionnaires. The average accuracy achieved was 93.74% ± 1.71%, using 5.25 seconds per selection. The questionnaires showed that users felt a minimal workload. Likewise, high satisfaction values were obtained, highlighting that the application was intuitive and responds quickly and smoothly. This c-VEP based multiplayer video game has reached suitable performance on 22 users, supported by high motivation and minimal workload. Consequently, compared to other versions of "Connect 4" that utilized different control signals, this version has exhibited superior performance.

Source Aware Deep Learning Framework for Hand Kinematic Reconstruction Using EEG Signal.

The ability to reconstruct the kinematic parameters of hand movement using noninvasive electroencephalography (EEG) is essential for strength and endurance augmentation using exoskeleton/exosuit. For system development, the conventional classification-based brain-computer interface (BCI) controls external devices by providing discrete control signals to the actuator. A continuous kinematic reconstruction from EEG signal is better suited for practical BCI applications. The state-of-the-art multivariable linear regression (mLR) method provides a continuous estimate of hand kinematics, achieving a maximum correlation of up to 0.67 between the measured and the estimated hand trajectory. In this work, three novel source aware deep learning models are proposed for motion trajectory prediction (MTP). In particular, multilayer perceptron (MLP), convolutional neural network-long short-term memory (CNN-LSTM), and wavelet packet decomposition (WPD) for CNN-LSTM are presented. In addition, novelty in the work includes the utilization of brain source localization (BSL) [using standardized low-resolution brain electromagnetic tomography (sLORETA)] for the reliable decoding of motor intention. The information is utilized for channel selection and accurate EEG time segment selection. The performance of the proposed models is compared with the traditionally utilized mLR technique on the reach, grasp, and lift (GAL) dataset. The effectiveness of the proposed framework is established using the Pearson correlation coefficient (PCC) and trajectory analysis. A significant improvement in the correlation coefficient is observed when compared with the state-of-the-art mLR model. Our work bridges the gap between the control and the actuator block, enabling real-time BCI implementation.

Classifying Unstable and Stable Walking Patterns Using Electroencephalography Signals and Machine Learning Algorithms.

Analyzing unstable gait patterns from Electroencephalography (EEG) signals is vital to develop real-time brain-computer interface (BCI) systems to prevent falls and associated injuries. This study investigates the feasibility of classification algorithms to detect walking instability utilizing EEG signals. A 64-channel Brain Vision EEG system was used to acquire EEG signals from 13 healthy adults. Participants performed walking trials for four different stable and unstable conditions: (i) normal walking, (ii) normal walking with medial-lateral perturbation (MLP), (iii) normal walking with dual-tasking (Stroop), (iv) normal walking with center of mass visual feedback. Digital biomarkers were extracted using wavelet energy and entropies from the EEG signals. Algorithms like the ChronoNet, SVM, Random Forest, gradient boosting and recurrent neural networks (LSTM) could classify with 67 to 82% accuracy. The classification results show that it is possible to accurately classify different gait patterns (from stable to unstable) using EEG-based digital biomarkers. This study develops various machine-learning-based classification models using EEG datasets with potential applications in detecting unsteady gait neural signals and intervening by preventing falls and injuries.

Using occipital ⍺-bursts to modulate behavior in real-time.

Pre-stimulus endogenous neural activity can influence the processing of upcoming sensory input and subsequent behavioral reactions. Despite it is known that spontaneous oscillatory activity mostly appears in stochastic bursts, typical approaches based on trial averaging fail to capture this. We aimed at relating spontaneous oscillatory bursts in the alpha band (8-13Hz) to visual detection behavior, via an electroencephalography-based brain-computer interface (BCI) that allowed for burst-triggered stimulus presentation in real-time. According to alpha theories, we hypothesized that visual targets presented during alpha-bursts should lead to slower responses and higher miss rates, whereas targets presented in the absence of bursts (low alpha activity) should lead to faster responses and higher false alarm rates. Our findings support the role of bursts of alpha oscillations in visual perception and exemplify how real-time BCI systems can be used as a test bench for brain-behavioral theories.

Fast Optical Signals for Real-Time Retinotopy and Brain Computer Interface.

A brain-computer interface (BCI) allows users to control external devices through brain activity. Portable neuroimaging techniques, such as near-infrared (NIR) imaging, are suitable for this goal. NIR imaging has been used to measure rapid changes in brain optical properties associated with neuronal activation, namely fast optical signals (FOS) with good spatiotemporal resolution. However, FOS have a low signal-to-noise ratio, limiting their BCI application. Here FOS were acquired with a frequency-domain optical system from the visual cortex during visual stimulation consisting of a rotating checkerboard wedge, flickering at 5 Hz. We used measures of photon count (Direct Current, DC light intensity) and time of flight (phase) at two NIR wavelengths (690 nm and 830 nm) combined with a machine learning approach for fast estimation of visual-field quadrant stimulation. The input features of a cross-validated support vector machine classifier were computed as the average modulus of the wavelet coherence between each channel and the average response among all channels in 512 ms time windows. An above chance performance was obtained when differentiating visual stimulation quadrants (left vs. right or top vs. bottom) with the best classification accuracy of ~63% (information transfer rate of ~6 bits/min) when classifying the superior and inferior stimulation quadrants using DC at 830 nm. The method is the first attempt to provide generalizable retinotopy classification relying on FOS, paving the way for the use of FOS in real-time BCI.

Multivariate variational mode decomposition & phase space reconstruction based motor imagery EEG classification

Electroencephalogram signals have gained much attention in recent years as these signals help in decoding a person's intentions for performing various actions using the Brain Computer Interface system. However, it is challenging to accurately classify human intentions as the electroencephalogram signals are non-linear and non-stationary. This work proposes a novel methodology for feature extraction and classification of motor imagery electroencephalogram signals. The proposed methodology is based on Multivariate Variational Mode Decomposition and Phase Space Reconstruction. A number of statistical and non-linear features are extracted and classified using the Ensemble Support Vector Machine model. The efficiency of the methodology is evaluated on BCI competition-IV(2a) dataset. The evaluation results conclude that the proposed methodology is able to classify both binary and multi-class electroencephalogram data with an average classification accuracy of 96.76% and 84.22%, respectively. Hence, the proposed methodology can be utilized in designing a real-time Brain Computer interface system.

Lower-limb kinematic reconstruction during pedaling tasks from EEG signals using Unscented Kalman filter

Kinematic reconstruction of lower-limb movements using electroencephalography (EEG) has been used in several rehabilitation systems. However, the nonlinear relationship between neural activity and limb movement may challenge decoders in real-time Brain-Computer Interface (BCI) applications. This paper proposes a nonlinear neural decoder using an Unscented Kalman Filter (UKF) to infer lower-limb kinematics from EEG signals during pedaling. The results demonstrated maximum decoding accuracy using slow cortical potentials in the delta band (0.1-4 Hz) of 0.33 for Pearson’s r-value and 8 for the signal-to-noise ratio (SNR). This leaves an open door to the development of closed-loop EEG-based BCI systems for kinematic monitoring during pedaling rehabilitation tasks.

Detection of Movement Related Cortical Potentials from Single Trial EEG Signals

Movement-Related Cortical Potentials (MRCP) are signals that begin to appear approximately two seconds before the onset of voluntary movements and can be recorded with EEG. MRCP is an important sign that the movement will begin. Determining the movement intention before the action is extremely important information especially for real-time BCI systems. By using MRCP, Brain-Computer Interface (BCI) users' movement intention can be determined prior to the move and this sign can be used as a control signal. In this study, it was aimed to determine the movement and resting states with high accuracy with MRCP signals. Furthermore, the effects of filter cutoff frequencies, number of electrodes, and MRCP time interval window on the success of distinguishing movement/resting states in the preprocessing stage were investigated. For this purpose, Katz fractal dimension and nonlinear support vector machine methods were used in the feature extraction and classification stages, respectively. The proposed method was tested on the attempted hand and arm movements dataset containing EEG signals of 10 participants with spinal cord injury. Katz fractal dimension and support vector machines methods can determine movement and resting states with an average of 96.47% accuracy using MRCP signals. If the number of electrodes to be used in signal analysis was 3, 9 and 61, the obtained accuracy rates were determined as 83.71%, 90.67%, and 96.47%, respectively. The experimental results also showed that the filter cutoff frequencies used in the preprocessing had a significant effect on the accuracy.