Reaction Rate Research Articles

Endoxylanase Immobilized Nanoporous Silica for the Production of Xylooligosaccharides: Equilibrium Kinetics, Thermodynamic Studies, and Enzyme Characteristics

AbstractNanoporous structured silica materials, namely f‐SiO2, SBA‐15, IITM‐41, and MCM‐41 were employed as the matrices for immobilizing endoxylanase by adsorption method. The equilibrium kinetics, activation energy, and thermodynamic parameters associated with endoxylanase adsorption were investigated. Our findings revealed a two‐phase adsorption mechanism: an initial phase featuring rapid adsorption rates, succeeded by a slower phase wherein adsorption gradually progressed until equilibrium was attained. Analysis of the adsorption kinetic data indicated a better fit with the pseudo‐second‐order model, suggesting chemisorption and highlighting its temperature dependency. The calculated activation energy (Ea) values fell within the range of physisorption, indicating the involvement of both types of adsorption processes. Thermodynamic assessments confirmed that the adsorption reactions were spontaneous, feasible, and endothermic. Notably, the immobilization process did not change the optimum pH of the enzyme, while the optimum temperature shifted slightly. Furthermore, immobilized enzymes show a higher reaction rate (Vmax) than the soluble XynC. All immobilized xylanases produced xylobiose (X2) to xylohexose (X6) by hydrolyzing the xylan substrate. Recycling studies showed that up to 80 % of the yield was retained after seven cycles of reuse. Our study demonstrates the potential of nanostructured silica as an effective immobilization matrix for enzymes of industrial significance.

Defining Golden Batches in Biomanufacturing Processes From Internal Metabolic Activity to Detect Process Changes That May Affect Product Quality.

Cellular metabolism plays a role in the observed variability of a drug substance's Critical Quality Attributes (CQAs) made by biomanufacturing processes. Therefore, here we describe a new approach for monitoring biomanufacturing processes that measures a set of metabolic reaction rates (named Critical Metabolic Parameters (CMP) in addition to the macroscopic process conditions currently being used as Critical Process Parameters (CPP) for biomanufacturing. Constraint-based systems biology models like Flux Balance Analysis (FBA) are used to estimate metabolic reaction rates, and metabolic rates are used as inputs for multivariate Batch Evolution Models (BEM). Metabolic activity was reproducible among batches and could be monitored to detect a deliberately induced macroscopic process shift (i.e., temperature change). The CMP approach has the potential to enable "golden batches" in biomanufacturing processes to be defined from the internal metabolic activity and to aid in detecting process changes that may impact the quality of the product. Overall, the data suggested that monitoring of metabolic activity has promise for biomanufacturing process control.

Clinical features and effects of cyclosporine in the treatment of psoriasis: a systemic review and meta-analysis.

To systematically evaluate clinical features and effects of cyclosporine in the treatment of psoriasis. Databases including Web of Science, PubMed, The Cochrane Library, Embase, CNKI, Wan Fang, and VIP were electronically searched for studies on the use of cyclosporine in the treatment of psoriasis, from inception to March 2024. Two reviewers independently screened the literature, extracted data, and assessed the risk of bias of the included studies. A meta-analysis was then performed. A total of 12 randomised controlled trial (RCT) studies were included. Compared with the control group, there were statistically significant differences in the effective rate, recurrence rate, erythema regression time, pustular resolution time, fever resolution time, and Psoriasis Area Severity Index (PASI) score of cyclosporine in the treatment of psoriasis. Moreover, the sub-group analysis showed that the effective rate of patients aged less than 40 years was significantly higher than that of the control group and the recurrence rate was significantly lower than that of the control group. The effective rate of psoriasis patients without nail lesions was significantly higher than that of control group. The effective rate of cyclosporin was significantly higher than that of dexamethasone acetate. There was no significant change in pooled sensitivity and specificity after each study was excluded one by one, indicating the stability of the meta-analysis. Cyclosporine had a high effective rate and low recurrence rate in the treatment of psoriasis, but it still had similar rate of adverse reactions compared to other drugs. This study systematically evaluated the effect of cyclosporine in the treatment of psoriasis and provided reference for clinical practice.

Preparation and properties analysis of CTBN/CeO2 co‐toughened epoxy resin composites

AbstractIn this paper, carboxyl‐terminated nitrile rubber (CTBN) and Nano cerium oxide (n‐CeO2) were used to toughen epoxy resin (EP), and the effects of toughening agents on the mechanical and thermal properties of EP were studied. Orthogonal experiments determined that the ideal toughener proportions are 20 wt% CTBN and 1 wt% n‐CeO2, under which the resin demonstrated superior mechanical characteristics. The combined application of CTBN and n‐CeO2 significantly enhanced the resin's mechanical properties, surpassing the effects of individual particle toughening. Compared with pure EP, the impact, flexural, and tensile strengths of the resin‐cured product synergistically toughened by CTBN and n‐CeO2 increased by 462%, 136%, and 110%, respectively, and the flexural and Young's moduli increased by 38% and 35%, respectively. Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) were used to characterize the cured resin. The results indicate that incorporating CTBN and n‐CeO2 reduces the reaction activation energy, thereby accelerating the curing reaction and facilitating its progression. The addition of nanoparticles enhances the maximum weight loss temperature of the cured resin, thereby improving its thermal stability. CTBN and n‐CeO2 particles create a uniform phase separation structure within the resin, enhancing its toughness and strength. Furthermore, the impact fracture mode of the cured resin transitions from brittle to tough fracture, demonstrating a significant toughening effect. This provides an effective method for the toughening modification of EP.Highlights The synergistic use of CTBN and n‐CeO2 enhances the toughness of EP. The incorporation of nanoparticles improves the thermal stability of the cured resin. The addition of CTBN and n‐CeO2 accelerates the curing reaction rate. The inclusion of toughening agents transforms the fracture mode of the cured resin from brittle to tough fracture.

Impact of Temperature on Reaction Rate in Catalytic Reactions

Purpose: The aim of the study was to assess the impact of temperature on reaction rate in catalytic reactions. Methodology: This study adopted a desk methodology. A desk study research design is commonly known as secondary data collection. This is basically collecting data from existing resources preferably because of its low cost advantage as compared to a field research. Our current study looked into already published studies and reports as the data was easily accessed through online journals and libraries. Findings: The study indicated that as higher temperatures generally increase the rate at which reactions occur. This is due to the fact that elevated temperatures provide the reactant molecules with more kinetic energy, enabling them to collide more frequently and with greater force, which is necessary to overcome the activation energy barrier. In catalytic reactions, temperature not only accelerates the intrinsic rate of the reaction but can also affect the activity and selectivity of the catalyst. However, too high a temperature can lead to catalyst deactivation through processes such as sintering or coke formation, where the catalyst surface is altered or blocked. Thus, an optimal temperature range is crucial to balance enhanced reaction rates while maintaining catalyst integrity and performance. Implications to Theory, Practice and Policy: Arrhenius equation, transition state theory and collision theory may be used to anchor future studies on the impact of temperature on reaction rate in catalytic reactions. In practical applications, industries should implement advanced temperature control systems to maintain optimal reaction conditions during catalytic processes. Policymakers have a critical role in shaping the landscape of catalytic reactions by developing regulatory guidelines focused on temperature management.

A Comprehensive Investigation on Catalytic Behavior of Anaerobic Jar Gassing Systems and Design of an Enhanced Cultivation System

The rapid and reliable diagnosis of anaerobic bacteria constitutes one of the key procedures in clinical microbiology. Automatic jar gassing systems are commonly used laboratory instruments for this purpose. The most critical factors affecting the cultivation performance of these systems are the level of residual oxygen remaining in the anaerobic jar and the reaction rate determined by the Pd/Al2O3 catalyst. The main objective of the presented study is to design and manufacture an enhanced jar gassing system equipped with an extremum seeking-based estimation algorithm that combines real-time data and a reaction model of the Pd/Al2O3 catalyst. The microkinetic behavior of the palladium catalyst was modeled through a learning-from-experiment methodology. The majority of microkinetic model parameters were derived from material characterization analysis. A comparative validation test of the designed cultivation system was conducted using conventional gas pouches via six different bacterial strains. The results demonstrated high cell viability, with colony counts ranging from 1.26 × 105 to 2.17 × 105 CFU mL−1. The favorable catalyst facets for water formation on Pd surfaces and the crystal structure of Pd/Al2O3 pellets were identified by X-ray diffraction analysis (XRD). The doping ratio of the noble metal (Pd) and the support material (Al2O3) was validated via energy-dispersive spectroscopy (EDS) measurements as 0.68% and 99.32%, respectively. The porous structure of the catalyst was also analyzed by scanning electron microscopy (SEM). During the reference clinical trial, the estimation algorithm was terminated after 878 iterations, having reached its predetermined termination value. The measured and modelled reaction rates were found to converge with a root-mean-squared error (RMSE) of less than 10−4, and the Arrhenius parameters of ongoing catalytic reaction were obtained. Additionally, our research offers a comprehensive analysis of anaerobic jar gassing systems from an engineering perspective, providing novel insights that are absent from the existing literature.

Entropy generation outcomes in peristalsis of Carreau–Yasuda nanofluid flow with activation energy

AbstractThis paper focuses on the study of activation energy and entropy generation in the peristaltic flow of a Carreau–Yasuda nanofluid. Peristaltic transport, coupled with entropy generation and activation energy in a curved geometry, has significant applications in biomedical and industrial processes involving non‐Newtonian fluids. Blood flow in the arteries, the movement of chyme in the gastrointestinal tract, and peristaltic motion replicate the natural muscular contractions that drive fluid flow in the physiological systems. The integration of entropy generation allows for the evaluation of energy efficiency and the analysis of losses due to viscous dissipation. Activation energy plays a crucial role in processes such as drug delivery, where temperature‐sensitive reactions or biochemical changes affect fluid behavior. In industrial applications, like peristaltic pumps in chemical reactors or polymer processing, the consideration of entropy and activation energy aids in optimizing thermal management and reaction rates. The mathematical model is developed under these assumptions, and the governing equations are numerically solved using the NDSolve function in Mathematica. Graphical results show that higher activation energy and concentration reduce the reaction rate, while the Bejan number and entropy generation increase with a larger Brinkman number. Velocity and temperature increase under slip conditions, whereas concentration decreases, and a stronger radial magnetic field reduces both velocity and the size of the trapped bolus.

Bifunctionalised acid-base hierarchically structured monolithic microreactor for continuous-flow tandem catalytic process of cyanocinnamate synthesis

The results on zirconia-amine bifunctional modification of hierarchically porous silica monoliths for continuous-flow processes ar presented. The study reports the synthesis and properties of the modified porous monoliths and their performance in the tandem process of deacetalization-Knoevenagel condensation reaction. The properties of the materials were studied by thermal analysis, FTIR spectroscopy, XRF and nitrogen adsorption. It was found that both active centres were uniformly distributed along the monolithic cores, and the antagonistic interaction of the acid and base centres was not observed. It was shown that hydrophobicity of the monolith surface has opposite effects on the efficiency of the studied reactions. The overall rate of the tandem process depends on the rate of the condensation reaction. The performance of the bifunctional microreactors was checked and compared with those of cascade-connected monofunctional microreactors and batch reactor. The yield of cyanocinnamate product obtained in both flow systems was ca. 78%; however, pressure drop in the bimodified reactor was only half of that in the cascade. An effective way of water supply to the reaction system has been proposed. The research demonstrates the benefits of using flow-through structured micro-/mesoreactors in tandem reaction processes.

Efficacy and safety of traditional Chinese medicine for the treatment of epilepsy by wind quenching and phlegm resolving: A systematic review and meta-analysis.

Using wind-quenching and phlegm-resolving (WQPR) therapy for epilepsy has yielded beneficial results in various clinical studies. However, a comprehensive analysis of the WQPR approach to epilepsy has not yet conducted to date. This study aimed to evaluate the effectiveness and safety of the WQPR method in traditional Chinese medicine (TCM) for epilepsy. Eight databases, including The Cochrane Library, Web of Science, PubMed, Embase, Chinese Biomedical Database, Chinese National Knowledge Infrastructure, Chinese Science and Technology Periodical Database (VIP), and WanFang Database, were comprehensively searched to include randomized controlled trials (RCTs) investigating the WQPR approach in epilepsy. Quality was evaluated by the Cochrane Handbook for Systematic Reviews of Interventions, and meta-analysis was conducted using the RevMan 5.4 and Stata 14.0 software. For the outcome indicators with the number of studies ≥ 10, funnel chart and Egger test were used to evaluate the bias, and the evidence quality was evaluated according to GRADEpro system. We included 19 randomized controlled trials with 1475 participants. Compared to the control group, the WQPR approach showed clinical efficacy for epilepsy (odds ratio = 3.23, 95% confidence interval [CI] [2.19, 4.77], Z = 5.90, P < .00001), reduced seizure frequency (standardized mean differences = -1.24, 95% CI [-1.62, -0.85], Z = 6.26, P < .00001), shortened seizure duration (standardized mean differences = -2.07, 95% CI [-2.99, -1.14], Z = 4.39, P < .0001), improved patient's quality of life (mean difference = 2.60, 95% CI [2.16, 3.03], Z = 11.62, P < .00001), and ameliorated TCM syndromes (mean difference = -4.37, 95% CI [-6.19, -2.56], Z = 4.72, P < .00001). The reduced rate of adverse reactions (odds ratio = 0.56, 95% CI [0.37, 0.85], Z = 2.71, P = .007). WQPR therapy appears to be an effective and safe approach for treating epilepsy, increasing clinical efficacy, reducing seizures' frequency and duration, improving patients' quality of life, ameliorating TCM syndromes, and reducing adverse reaction rates.

Microstructural Modification and Sorption Capacity of Green Coffee Beans.

To enhance the pore structure of green coffee beans (GCB) and detect the sorption capacity and extraction characteristics of flavor compounds before roasting, this study employed several methods: hot air drying (HD), freeze-drying (FD), 3-levels short-time heating with puffing (SH1P, SH2P, and SH3P), and 3-levels microwave with puffing (MW45P, MW60P, and MW75P). These methods were applied to GCBs pre-soaked in water for different times. The effects of these treatments on color change, porosity, microstructure, citric acid sorption capacity, and caffeine and chlorogenic acid extraction yield were investigated. Results indicated that, except for GCBs treated with SH1P, SH2P, SH3P, and MW75P, all other modified GCBs showed minimal color change. GCBs treated with MW60P exhibited favorable pore structures. MW60P treatments significantly improved the extraction yield of caffeine and chlorogenic acid. Furthermore, the increased porosity and improved pore size distribution of GCB after MW60P resulted in a significant increase in the sorption of citric acid onto modified GCB. The rate of the sorption reaction followed the pseudo-first-order kinetics. In conclusion, MW60P are effective treatments for enhancing the microstructure of GCB, improving sorption capacity, and improving the extraction yield of flavor compounds.

Autoignition of premixed hydrogen/air mixtures with uniformly dispersed carbon particles

The autoignition of a stoichiometric hydrogen/air mixture laden with uniformly distributed coal char particles is simulated with the Eulerian-Lagrangian approach under isochoric conditions. A zero-dimensional model is adopted to assess the effects of gas temperature, pressure, particle diameter, and concentration on ignition dynamics. Increasing the initial temperature reduces the ignition time and maximum heat release rate of the homogeneous reactions, while the parameters for particle reactions stabilize after reaching a critical temperature. Initial pressure exhibits a non-monotonic influence on gas phase ignition, with higher pressures promoting particle autoignition. An increase in particle diameter decreases the ignition time for the homogeneous reaction, approaching that of particle-free conditions. Meanwhile, particle ignition time first decreases and then linearly increases. Increasing particle concentration reduces the interphase disparities of ignition times, while the two-phase ignition times rapidly rise after exceeding the critical concentration. Moreover, pre-ignition temperature equilibrium (PTE) significantly impacts the ignition parameters and processes. PTE results in a minimal ignition time disparity between the gas and particles, with coal char particles markedly influencing hydrogen ignition. Failure to reach PTE leads to significant two-phase ignition time differences, with negligible impact from the solid phase on gas phase ignition. The particle effect ratio, δ, is introduced to evaluate these effects. Notably, the evolution variations in ignition time and heat release rate are determined by the existence of the PTE under corresponding initial conditions. The findings of this study are crucial for developing strategies to mitigate explosion hazards and enhance the performance of detonation propulsion systems using hybrid fuels.

Solitary wave form of reaction rate in graphite diffusive medium using different neutron absorbers

Abstract Graphite nuclear properties such as moderating power and absorption cross-section, are not as good as those of heavy water. But its pure form can be prepared. Its structural and thermal properties are good and it has a high thermal conductivity. The thermal neutron in graphite performs an average of 1,200 scattering collisions before it is absorbed. This very low absorption cross section makes graphite as an ideal material for applications in nuclear reactors. In the current research, graphite is assumed as a diffusive medium due to its low absorption cross-section (0.0035 b) and having a low mass close to the neutron mass. In this medium: Boron (10B), Cadmium (113Cd), Samarium (149Sm), Europium (151Eu), Hafnium (177Hf) and Gadolinium (157Gd), separately are also considered as neutron absorbers. The aim of this paper is obtaining the solitary wave form of reaction rate in graphite diffusive medium using these neutron absorbers.

Modeling the oxygen effect in DNA strand break induced by gamma-rays with TOPAS-nBio

Objective.To present and validate a method to simulate from first principles the effect of oxygen on radiation-induced double-strand breaks (DSBs) using the Monte Carlo Track-structure code TOPAS-nBio.Approach.Two chemical models based on the oxygen fixation hypothesis (OFH) were developed in TOPAS-nBio by considering an oxygen adduct state of DNA and creating a competition kinetic mechanism between oxygen and the radioprotective molecule WR-1065. We named these models 'simple' and 'detailed' due to the way they handle the hydrogen abstraction pathways. We used the simple model to obtain additional information for the •OH-DNA hydrogen abstraction pathway probability for the detailed model. These models were calibrated and compared with published experimental data of linear and supercoiling fractions obtained with R6K plasmids, suspended in dioxane as a hydroxyl scavenger, and irradiated with137Cs gamma-rays. The reaction rates for WR-1065 and O2with DNA were taken from experimental works. Single-Strand Breaks (SSBs) and DSBs as a function of the dose for a range of oxygen concentrations [O2] (0.021%-21%) were obtained. Finally, the hypoxia reduction factor (HRF) was obtained from DSBs.Main Results.Validation results followed the trend of the experimental within 12% for the supercoiled and linear plasmid fractions for both models. The HRF agreed with measurements obtained with137Cs and 200-280 kVp x-ray within experimental uncertainties. However, the HRF at an oxygen concentration of 2.1% overestimated experimental results by a factor of 1.7 ± 0.1. Increasing the concentration of WR-1065 from 1 mM to 10-100 mM resulted in a HRF difference of 0.01, within the 8% statistical uncertainty between TOPAS-nBio and experimental data. This highlights the possibility of using these chemical models to recreate experimental HRF results.Significance.Results support the OFH as a leading cause of oxygen radio-sensitization effects given a competition between oxygen and chemical DNA repair molecules like WR-1065.

Efficient Cleavage of pUC19 DNA by Tetraaminonaphthols.

In an attempt to create models of phosphodiesterases, we previously investigated bis(guanidinium) naphthols. Such metal-free anion receptors cleaved aryl phosphates and also plasmid DNA. Observed reaction rates, however, could not compete with those of highly reactive metal complexes. In the present study, we have replaced the guanidines by ethylene diamine side chains which accelerates the plasmid cleavage by compound 13 significantly (1 mM 13: t1/2=22 h). Further gains in reactivity are achieved by azo coupling of the naphthol unit. The electron accepting azo group decreases the pKa of the hydroxy group. It can also serve as a dye label and a handle for attaching DNA binding moieties. The resulting azo naphthol 17 not only nicks (1 mM 17: t1/2~1 h) but also linearizes pUC19 DNA. Although the high reactivity of 17 seems to result in part from aggregation, in the presence of EDTA azo naphthol 17 obeys first order kinetics (1 mM 17: t1/2=4.8 h), reacts four times faster than naphthol 13 and surpasses by far the former bis(guanidinium) naphthols 4 and 5.

Heteropolyacids combined with Y zeolite as superior solid acid catalysts to accelerate lactic acid esterification

AbstractBACKGROUNDEthyl lactate produced via esterification between lactic acid and ethanol can be used in plastics, polymers and food industries and renowned for its biodegradability and low toxicity. However, lactic acid self‐catalyzed esterification presents a slow reaction process, and acid catalysts are needed to improve the catalysis. Homogeneous acid catalysts like H2SO4 are corrosive, as well as being difficult to be seperated from the reaction media; therefore, advanced heterogeneous catalysts are more ideal. In this study, two kinds of heteropolyacid–zeolite catalysts, involving loading silicotungstic acid and phosphotungstic acid onto Y zeolite, were synthesized, characterized using X‐ray diffraction, NH3 temperature‐programmed desorption and scanning electron microscopy and analyzed for their catalytic efficiency in the catalytic esterfication.RESULTSResults showed that the Keggin structures of heteropolyacids were retained during the preparation process and strong acid sites of Y zeolite were enriched, which made the main contribution to the esterification of lactic acid and ethanol. Furthermore, the initial‐stage reaction rate of esterification was significantly enhanced. During the first hour of esterification, the conversion of lactic acid increased from 18% to 65%. Exp Dec1 index model was employed to determine the activation energies of 60HSiW‐Y and 60HPW‐Y, which exhibit values of 29.3 and 28.2 kJ mol−1, respectively.CONCLUSIONThis study indicates that Keggin structures of heteropolyacids play a key role in the esterification and heteropolyacid–zeolite catalysts can effectively catalyze the esterification. Meanwhile, the results of the kinetic experiments can be of reference significance for large‐scale industrial processes involving esterification. © 2024 Society of Chemical Industry (SCI).

A novel simultaneous abatement of bromate and diphenyl phosphate using the freezing process

The purification of bromate (BrO3-)-contaminated water has become a challenge because of its persistence and adverse effects. Furthermore, there has been concern over the release of byproducts, such as diphenyl phosphate (DPHP), from flame retardants in wastewater treatment plant (WWTP). In this study, we designed the water treatment system for the oxidation of DPHP accompanied by bromate (BrO3-) reduction via freezing the solution. A sample containing 10 μM DPHP, 100 μM Br-, and 50 μM BrO3-, with a pH of 3 was frozen at -20oC, approximately 25 μM BrO3- was reduced, and DPHP was fully eliminated after a 0.5 h reaction time. Conversely, these reactions did not advance in water at 20oC. This increase in the rate of chemical reaction in ice is the consequence of the freeze concentration effect, which refers to the extraction of dissolved chemical species into the liquid-like regions of the polycrystalline ice micro-structure during the freezing of the solution. The redox reactions among DPHP, Br-, and BrO3- become thermodynamically favorable due to the distinctive environment in the liquid brine in ice. The efficiency of the DPHP oxidation significantly increased with an increase in BrO3- concentration, and vice versa. The Br-/BrO3--induced HOBr production is proposed as a primary oxidant for DPHP degradation. The proton activity (pH) has a significant influence on the reaction efficiency. The low freezing temperature accelerated the reaction kinetics of DPHP degradation and BrO3- reduction. The results of this study indicate the possibility of utilizing ice chemistry for the BrO3- reduction that concomitantly removes DPHP for water treatment. This environmentally friendly water treatment method can be considered to implement in regions with a cold climate.

Highly selective electrosynthesis of imines via electroreduction coupling of nitroarenes with aryl aldehydes on Co9S8 with positively charged sulfur vacancies

The electrocatalytic synthesis of imines through the reductive imination of nitroarenes with aldehydes is a facile, environmentally friendly, and valuable process. In this study, high selectivity electrosynthesis of imines was realized through the electrocatalytic C-N coupling reaction between nitroarenes and aryl aldehydes on Co9S8 nanoflowers with rich sulfur vacancies (Co9S8-Vs). Comparative experiments revealed that positively charged sulfur vacancies play a pivotal role in boosting catalytic selectivity towards imines. Electron-deficient sulfur vacancies intensified the adsorption of negatively charged Ph-NO2, thereby enhancing the conversion rate of the electrochemical nitrobenzene-reduction reaction (eNB-RR). Simultaneously, sulfur vacancies augmented the adsorption capability of negatively charged Ph-CHO, enriching Ph-CHO species at the electrode interface and expediting the Schiff base condensation reaction rate. The experimental results show that the reaction conditions can satisfy the different nitroarenes and aryl aldehydes in the electrocatalytic aqueous-phase system under mild conditions to obtain the corresponding imine products in high selectivity. This study provides a facile and environmentally friendly pathway for future electrocatalytic synthesis of imine.

Safety and adherence of early oral immunotherapy for peanut allergy in a primary care setting: a retrospective cross-sectional study

BackgroundPeanut allergy is a common food allergy with potentially life-threatening implications. Early oral immunotherapy for peanut allergy (P-EOIT) has been shown to be effective and safe in research and specialty clinic settings. Provision of P-EOIT in primary care would make it available to more patients. We sought to assess the safety of P-EOIT in a primary care setting by documenting the rates of peanut-related allergic reactions leading to emergency department (ED) visits and use of epinephrine. We also examined adherence by assessing the percentage of patients reaching maintenance phase and continuing ingestion after one year of P-EOIT.MethodsThis retrospective study included all patients aged less than 36 months who started P-EOIT at a primary care allergy clinic in New Brunswick, Canada, from 2016 to 2020. The population included patients who (1) had a history of an allergic reaction to peanuts with a positive skin prick test or positive peanut specific IgE level (ps-IgE) or (2) no history of ingestion and a baseline ps-IgE ≥5 kU/L. Patients had biweekly clinic visits with graded increases in peanut protein up to a maintenance dose of 300 mg of peanut protein daily. A blinded retrospective review of paper charts and electronic medical records was conducted along with phone interviews regarding ED visits and epinephrine use.ResultsAll 69 consented patients reached maintenance dose over a median of 29 weeks, and 66 patients (95.7%) were still regularly consuming peanut protein after 1 year of maintenance. One patient had a peanut ingestion-related ED visit requiring epinephrine during the escalation phase of peanut protein dosing (1.4%). During the first year of maintenance phase, no patients had peanut ingestion-related ED visits nor required epinephrine.ConclusionEarly oral immunotherapy for peanut allergy in a primary care setting appears to be safe and our findings suggest that it does not lead to an increased burden of emergency department visits. Our population had high adherence rates, with the majority achieving maintenance dose and staying on this dose for one year.

Reaction of F Atoms with Carbonyl Sulfide: Experimental and Theoretical Study.

The gas phase reaction of fluorine atoms with carbonyl sulfide, F + OCS → SF + CO (1), has been investigated over a wide temperature range, T = 220-960 K, in a discharge-flow system combined with mass spectrometry for the analysis of the reactive mixture. The reaction rate coefficient was determined as a function of temperature using both absolute (under pseudo-first-order conditions using an excess of F atoms) and relative rate methods: k1 = (8.95 ± 0.52) × 10-11 exp((102 ± 20)/T) cm3 molecule-1 s-1 (with an estimated total uncertainty of 15% independent of temperature). The SF radical was observed as the main primary reaction product. The experimental results are supported by theoretical calculations, which evidence that the reaction is exothermic with a weak negative temperature dependence.

Dual quenching ECL strategy based on AgInZnS quantum dots and a new co-reaction promoter oxygen vacancy-modified P5AIn/TiO2 for sensitive CEA detection

A novel electrochemiluminescence (ECL) biosensor for the sensitive detection of carcinoembryonic antigen (CEA) was constructed, utilizing environmentally friendly AgInZnS quantum dots (AgInZnS QDs) and a new co-reaction promoter enriched with oxygen vacancies, namely titanium dioxide/poly(5-aminoindole) (Ov-TiO2/P5AIn). The composite of P5AIn and TiO2 significantly enhanced the reaction rate of AgInZnS QDs with tripropylamine (TPrA). In addition, the presence of oxygen vacancies significantly enhances the electron migration rate of the electrode material, leading to more efficient catalysis of TPrA+ generation and a significant enhancement of ECL signals. Furthermore, a dual-quenching sensing strategy was employed using cuprous oxide-triaminophenol (Cu2O@APF) as the quencher, enabling the biosensor to switch. Through dual quenching of the ECL emission from AgInZnS QDs by Cu2O and APF, the biosensor achieves an extremely low “off” state of the ECL signal. Furthermore, a signal amplification strategy driven by the synergistic action of exonuclease III (ExoIII) and restriction endonuclease (Nt.BbvCI) was designed for a dual-site DNA walker, achieving cyclic amplification of the target signal and ECL signal, thereby turning the signal “on” again. The above mechanism significantly improved the specificity and sensitivity of the biosensor for CEA detection. The prepared biosensor exhibits good stability, selectivity, and sensitivity. The linear range for CEA detection is 5 × 10−14 to 10−8 M, with a detection limit of 16 fM. Additionally, the biosensor demonstrates satisfactory analytical capability for CEA in real blood samples. This strategy provides a reliable new approach for the sensitive detection of CEA and other tumor markers.