Reaction Pathways Research Articles

Lithium insertion/extraction mechanism in Mg2Sn anode for lithium-ion batteries

Due to its high capacity and excellent voltage properties, the Mg2Sn intermetallic phase is considered a promising anode material for next-generation lithium-ion batteries. However, the rapid capacity loss with cycling presently limits the application of Mg2Sn-based anodes. In this work, the Mg2Sn intermetallic phase was synthesized via a conventional casting method, and mechanisms of lithium ions intercalation into Mg2Sn alloy anodes were systematically studied. Density functional theory (DFT) calculations and electrochemical analyses identified two pathways involving four electrochemical reactions for Li+ intercalation/extraction in the Mg2Sn phase. The first pathway involves the insertion reaction of lithium ions into the octahedral sites of the Mg2Sn face center cubic (FCC) matrix, whilst the second involves the substitution of Mg by Li ions (releasing Mg metal). Furthermore, ex-situ EIS analysis and DFT calculations verified that adjusting the cut-off voltage range could control the reaction pathways. Excessively high or low cut-off voltages adversely impact the stability of the Mg2Sn anode. At cut-off voltages between 0.1 and 1 V, Mg2Sn anodes show very good capacity retention (78 % after 50 cycles), benefiting from the minimized formation of metallic Mg and Sn phases.

On the fate of protonated chloroformates in the gas phase: a competition between forming HCl and chloroformic acid.

Chloroformates are prevalent in the atmosphere due to their utilization as fuel additives and industrial solvents. These species may undergo interactions with atmospheric water resulting in protonated chloroformates. This study delves into the gas-phase dissociation of these protonated species. Tandem mass spectrometry was employed to scrutinize the unimolecular dissociation of protonated methyl (1), ethyl (2), neopentyl (3), and phenyl chloroformate (4). Notably, 1 and 4 exhibited HCl loss, yielding CH3OCO+ and C6H5OCO+, respectively, with 1 additionally generating neutral methanol and ClCO+. 4 additionally loses CO and CO2. In contrast, 2 and 3 each only exhibit a single fragmentation channel, with 2 losing C2H4 to generate protonated chloroformic acid and 3 generating protonated 2-methylbutene by losing neutral chloroformic acid. Density functional theory at the B3LYP/6-311+G(d,p) level of theory was employed to explore minimum energy reaction pathways for each ion, and CBS-QB3 single-point energy calculations were added to provide reliable energetics. The Rice-Ramsperger-Kassel-Marcus (RRKM) calculations of the rate constants for selected competing processes were carried out to link theory and experiment. One common unimolecular process observed was the 1,3-H shift of the proton from the carbonyl oxygen to the ester oxygen before dissociation.

Steering the Reaction Pathway of CO2 Electroreduction by Tuning the Coordination Number of Copper Catalysts.

Cu-based catalysts are optimal for the electroreduction of CO2 to generate hydrocarbon products. However, controlling product distribution remains a challenging topic. The theoretical investigations have revealed that the coordination number (CN) of Cu considerably influences the adsorption energy of *CO intermediates, thereby affecting the reaction pathway. Cu catalysts with different CNs were fabricated by reducing CuO precursors via cyclic voltammetry (Cyc-Cu), potentiostatic electrolysis (Pot-Cu), and pulsed electrolysis (Pul-Cu), respectively. High-CN Cu catalysts predominantly generate C2+ products, while low-CN Cu favors CH4 production. For instance, over the high-CN Pot-Cu, C2+ is the main product, with the Faradaic efficiency (FE) reaching 82.5% and a partial current density (j) of 514.3 mA cm-2. Conversely, the low-CN Pul(3)-Cu favors the production of CH4, achieving the highest FECH4 value of 56.7% with a jCH4 value of 234.4 mA cm-2. In situ X-ray absorption spectroscopy and Raman spectroscopy studies further confirm the different *CO adsorptions over Cu catalysts with different CN, thereby directing the reaction pathway of the CO2RR.

Utopia Point Bayesian Optimization Finds Condition-Dependent Selectivity for N-Methyl Pyrazole Condensation.

Utopia Point Bayesian Optimization (UPBO) was used to identify reaction conditions that are highly selective for the formation of N1 and N2-methyl-3-aryl pyrazole constitutional isomers. UPBO was used to explore a wide chemical space and identify basic reaction conditions for a typically acid-catalyzed Knorr pyrazole condensation. These studies revealed that selectivity in the reaction stems from a condition-dependent equilibrium of intermediates prior to dehydration. For the N2-methyl isomer reaction pathway, a hemiaminal intermediate was found to form reversibly under the reaction conditions, enabling a highly selective synthesis of the N2 isomer upon dehydrative workup. UPBO was able to successfully optimize conversion and selectivity simultaneously with search spaces of >1 million potential variable combinations without the need for high-performance computational resources.

Lead-Chelating Intermediate for Air-Processed Phase-Pure FAPbI3 Perovskite Solar Cells.

Formamidinium-lead triiodide (FAPbI3) perovskite holds promise as a prime candidate in the realm of perovskite photovoltaics. However, the photo-active α-FAPbI3 phase, existing as a metastable state, is observable solely at elevated temperatures and is susceptible to degradation into the δ-phase in ambient air. Therefore, the attainment of phase-stable α-FAPbI3 in ambient conditions has become a crucial objective in perovskite research. Here, we proposed an efficient conversion process of PbI2 into the α-FAPbI3 perovskites in ambient air. This conversion was facilitated by the introduction of chelating molecules, which interacted with PbI2 to form an intermediate phase. Due to the reduced formation barrier resulting from the altered reaction pathway, this stable intermediate phase transitioned directly into α-FAPbI3 upon the deposition of the organic cation solution, effectively bypassing the formation of δ-FAPbI3. Consequently, the ambient-fabricated FAPbI3 perovskite solar cells (PSCs) exhibited an outstanding power conversion efficiency of 25.08%, along with a high open-circuit voltage of 1.19 V. Furthermore, the unencapsulated devices demonstrated remarkable environmental stability. Notably, this innovative approach promises broad applicability across various chelating molecules, opening new avenues for further progress in the ambient air fabrication of FAPbI3 PSCs.

The RNA-DNA world and the emergence of DNA-encoded heritable traits

ABSTRACT The RNA world hypothesis confers a central role to RNA molecules in information encoding and catalysis. Even though evidence in support of this hypothesis has accumulated from both experiments and computational modelling, the transition from an RNA world to a world where heritable genetic information is encoded in DNA remains an open question. Recent experiments show that both RNA and DNA templates can extend complementary primers using free RNA/DNA nucleotides, either non-enzymatically or in the presence of a replicase ribozyme. Guided by these experiments, we analyse protocellular evolution with an expanded set of reaction pathways made possible through the presence of DNA nucleotides. By encapsulating these reactions inside three different types of protocellular compartments, each subject to distinct modes of selection, we show how protocells containing DNA-encoded replicases in low copy numbers and replicases in high copy numbers can dominate the population. This is facilitated by a reaction that leads to auto-catalytic synthesis of replicase ribozymes from DNA templates encoding the replicase after the chance emergence of a replicase through non-enzymatic reactions. Our work unveils a pathway for the transition from an RNA world to a mixed RNA-DNA world characterized by Darwinian evolution, where DNA sequences encode heritable phenotypes.

Lead‐Chelating Intermediate for Air‐Processed Phase‐Pure FAPbI3 Perovskite Solar Cells

Formamidinium–lead triiodide (FAPbI3) perovskite holds promise as a prime candidate in the realm of perovskite photovoltaics. However, the photo‐active α‐FAPbI3 phase, existing as a metastable state, is observable solely at elevated temperatures and is susceptible to degradation into the δ‐phase in ambient air. Therefore, the attainment of phase‐stable α‐FAPbI3 in ambient conditions has become a crucial objective in perovskite research. Here, we proposed an efficient conversion process of PbI2 into the α‐FAPbI3 perovskites in ambient air. This conversion was facilitated by the introduction of chelating molecules, which interacted with PbI2 to form an intermediate phase. Due to the reduced formation barrier resulting from the altered reaction pathway, this stable intermediate phase transitioned directly into α‐FAPbI3 upon the deposition of the organic cation solution, effectively bypassing the formation of δ‐FAPbI3. Consequently, the ambient‐fabricated FAPbI3 perovskite solar cells (PSCs) exhibited an outstanding power conversion efficiency of 25.08%, along with a high open‐circuit voltage of 1.19 V. Furthermore, the unencapsulated devices demonstrated remarkable environmental stability. Notably, this innovative approach promises broad applicability across various chelating molecules, opening new avenues for further progress in the ambient air fabrication of FAPbI3 PSCs.

Deconstruction of Polymers through Olefin Metathesis.

The consumption of synthetic polymers has ballooned; so has the amount of post-consumer waste generated. The current polymer economy, however, is largely linear with most of the post-consumer waste being either landfilled or incinerated. The lack of recycling, together with the sizable carbon footprint of the polymer industry, has led to major negative environmental impacts. Over the past few years, chemical recycling technologies have gained significant traction as a possible technological route to tackle these challenges. In this regard, olefin metathesis, with its versatility and ease of operation, has emerged as an attractive tool. Here, we discuss the developments in olefin-metathesis-based chemical recycling technologies, including the development of new materials and the application of olefin metathesis to the recycling of commercial materials. We delve into structure-reactivity relationships in the context of polymerization-depolymerization behavior, how experimental conditions influence deconstruction outcomes, and the reaction pathways underlying these approaches. We also look at the current hurdles in adopting these technologies and relevant future directions for the field.

Dual photoactive species in CuPd for light‐switched homo‐coupling of alkynes in anaerobic and base free condition

Various ratios of CuPd alloy are loaded on C3N4 and utilized as efficient photocatalyst for the light‐switched homo‐coupling of alkynes in anaerobic and base free condition. For the model phenylacetylene reactant, the light‐irradiation promotes the reaction rate from 36.9% to 99.9% and the selectivity of 1,3‐diynes from 0% to 68.7%. Different supports, solvents and the induction period of the prepared samples show influence on the activity. The action spectra with different light wavelengths demonstrate that both copper phenylacetylide intermediate formed during the reaction and the localized surface plasmon resonance (LSPR) effect of the copper in CuPd alloy are the photoactive species. Through the control experiments, it confirms that these dual photoactive species and the interface between Cu and Pd are essential for efficient light‐switching reaction pathway.

Heterogeneous Oxidase-Type Catalysis for H2 Generation at Low Temperatures.

The long-term objective in the field of heterogeneous catalysis is to develop an enzyme-like catalytic pathway that can achieve exceptional catalytic performance even at low temperatures. Herein, we have demonstrated a heterogeneous oxidase-type catalysis on the ZnO-supported Ru clusters (Ru/ZnO) for efficient H2 generation from an aqueous solution of formaldehyde (HCHO) at low temperatures. Due to its unique reaction pathway, the Ru/ZnO catalysts exhibited a temperature-insensitive activity for H2 generation at the temperature of 15 to 45 °C. Remarkably, even at a low temperature of 5 °C, the Ru/ZnO catalysts still enabled an H2 generation rate of 13.8 mmol gcat-1 h-1 with a turnover frequency (TOF) of 1678 h-1. Additionally, instead of producing a CO2/CO molecule, the HCHO molecule underwent a transformation into formic acid and/or formate as the byproduct. This finding presents a novel class of heterogeneous catalysts to expand the potential application scenarios of liquid hydrogen storage and transportation systems.

Promoted Reaction Reversibility by Dual-Effect 15-Crown-5 Ether Additive for High-Performance Li-O2 Batteries.

The practical application of lithium-oxygen batteries (LOBs) with ultrahigh theoretical energy density faces the problems of poor kinetics and deficient reversibility. The electrolyte is of vital significance to the electrochemical stability and reaction pathway of LOBs due to the formation of soluble products. Here, a 15-crown-5 ether (15C5) is employed to regulate the solvation structure of Li+ and manipulate the reaction mechanism through regulating the binding ability toward Li+. The promoted dissociation of LiNO3 by 15C5 increases the catalytical active anions in the electrolyte and stabilizes the Li-containing reduced oxygen species to promote the solution pathway of discharge product growth. Besides, 15C5 also facilitates the kinetics of the electrochemical decomposition of Li2O2 and prolongs the cycle life to 178 cycles. This work inspires a novel approach to improve the battery performance through electrolyte component design.

Investigation of ultrafast intermediate states during singlet fission in lycopene H-aggregate using femtosecond stimulated Raman spectroscopy.

The singlet fission process involves the conversion of one singlet excited state into two triplet states, which has significant potential for enhancing the energy utilization efficiency of solar cells. Carotenoid, a typical π conjugated chromophore, exhibits specific aggregate morphologies known to display singlet fission behavior. In this study, we investigate the singlet fission process in lycopene H-aggregates using femtosecond stimulated Raman spectroscopy aided by quantum chemical calculation. The experimental results reveal two reaction pathways that effectively relax the S2 (11Bu+) state populations in lycopene H-aggregates: a monomer-like singlet excited state relaxation pathway through S2 (11Bu+) → 11Bu- → S1 (21Ag-) and a dominant sequential singlet fission reaction pathway involving the S2 (11Bu+) state, followed by S* state, a triplet pair state [1(TT)], eventually leading to a long lifetime triplet state T1. Importantly, the presence of both anionic and cationic fingerprint Raman peaks in the S* state is indicative of a substantial charge-transfer character.

A DFT-D investigation of the energetic and structural aspects of dehydrogenation of methanol on a bimetallic surface PtGe(110) exploring the germanium effect on the anti-poisoning of pt(110) catalytic activity

Platinum is the most active pure metal for dehydrogenating methanol to create hydrogen, which is crucial for fuel cells. However, one significant disadvantage that reduces the effectiveness and long-term performance of platinum catalysts is their susceptibility to CO poisoning. In the current study, we examine and elucidate the promotional impact of Ge on Pt catalysts with increased resistance to deactivation by CO poisoning. We do this by combining partial density of states calculations with electronic configuration and Mulliken atomic charges. The self-consistent periodic density functional theory with dispersion correction (DFT-D) was used to investigate the methanol adsorption and dehydrogenation mechanisms on the surface of PtGe (110). On the surface, several adsorption mechanisms of pertinent intermediates were found. Furthermore, a thorough analysis of a reaction network comprising four reaction paths revealed that, in terms of activation barriers, the first O—H bond scission of CH3OH appears to be more advantageous than C—H bond cleavage on the PtGe(110) surface. Additionally, it has been demonstrated that the main route on the PtGe(110) surface is CH3OH→CH3O→CH2O→CHO→CO evolution. The remarkable differences in the predominant reaction pathway on the Pt(110) surface, and PtGe(110) surface indicate that the Ge-doped Pt Nano catalyst is more selective and resistant to deactivation.

Numerical study on soot formation in ammonia/ethylene laminar counterflow diffusion flame

The ammonia addition can significantly inhibit soot formation in hydrocarbon fuel flames. However due to the complexity of the interaction between nitrogen and hydrocarbon, the inhibiting effect of NH3 addition on soot formation has not been fully understood yet. In this study, a mechanism is constructed through mechanism comparison, reduction and merging. The constructed mechanism includes ammonia, polycyclic aromatic hydrocarbons (PAHs) and nitrogen-containing aromatic compounds (NACs) sub-chemistry. Then the constructed mechanism is coupled with a soot model to conduct a series of simulations of ammonia/ethylene laminar counterflow flames with various ammonia doping ratios. The results show that the constructed model can reproduce the suppression effect of ammonia addition on soot formation well. To explain the chemical inhibiting effect, the rate of production (ROP) and reaction pathway are analyzed. It can be concluded that the main formation pathway of benzene is C2H4 → C2H3 → C2H2 → C3H3 → A1. The decomposition of ammonia consumes H radical which is necessary for the conversion of C2H4 to C2H3, leading to a decrease in the reaction rates along the benzene formation pathway. Moreover, the N-containing species react with the small hydrocarbon molecules/radicals to form hydrogen cyanide (HCN), in which the reaction between C2H2 and N radical is the largest contributor. Compared to the reactions between C1-C2 species and nitrogen-containing species, the reactions between C3 species and nitrogen-containing species contribute less to the chemical effect of NH3 addition. All these reactions reduce the carbon flux of the benzene formation path. In addition, the impact of reactions between HCN and aromatic hydrocarbons which produce NACs is also investigated. The reactions of HCN addition to benzene and naphthalene compete with the C2H2 addition reactions, resulting in a slightly enhanced inhibiting effect of ammonia addition on soot formation.

Atomistic Details of Methyl Linoleate Pyrolysis: Direct Molecular Dynamics Simulation of Converting Biodiesel to Petroleum Products

Dependence on petroleum and petrochemical products is unsustainable; it is both a finite resource and an environmental hazard. Biodiesel has many attractive qualities, including a sustainable feedstock; however, it has its complications. The pyrolysis (a process already in common use in the petroleum industry) of biodiesel has demonstrated the formation of smaller hydrocarbons comprising many petrochemical products but experiments suffer from difficulty quantifying the myriad reaction pathways followed and products formed. A computational simulation of pyrolysis using “ab initio molecular dynamics” offers atomic-level detail of the reaction pathways and products formed. Herein, the most prevalent fatty-acid ester (methyl linoleate) from the most prevalent feedstock for biodiesel in the United States (soybean oil) is studied. Temperature acceleration within the atom-centered density matrix propagation formalism (Car–Parrinello) utilizing the D3-M06-2X/6-31+G(d,p) model chemistry is used to compose an ensemble of trajectories. The results are grounded in comparison to experimental studies through agreement in the following: (1) the extent of reactivity (40% in the experimental and 36.1% in this work), (2) the homology of hydrocarbon products formed (wt % of C6–C10 products), and (3) the CO/CO2 product ratio. Deoxygenation pathways are critically analyzed (as the presence of oxygen in biodiesel represents a disadvantage in its current use). Within this ensemble, deoxygenation was found to proceed through two subclasses: (1) spontaneous deoxygenation, following one of four possible pathways; or (2) induced deoxygenation, following one of three possible pathways.

Atomic Design of Copper Active Sites in Pristine Metal-Organic Coordination Compounds for Electrocatalytic Carbon Dioxide Reduction.

Electrocatalytic carbon dioxide reduction reaction (CO2RR) has emerged as a promising and sustainable approach to cut carbon emissions by converting greenhouse gas CO2 to value-added chemicals and fuels. Metal-organic coordination compounds, especially the copper (Cu)-based coordination compounds, which feature well-defined crystalline structures and designable metal active sites, have attracted much research attention in electrocatalytic CO2RR. Herein, the recent advances of electrochemical CO2RR on pristine Cu-based coordination compounds with different types of Cu active sites are reviewed. First, the general reaction pathways of electrocatalytic CO2RR on Cu-based coordination compounds are briefly introduced. Then the highly efficient conversion of CO2 on various kinds of Cu active sites (e.g., single-Cu site, dimeric-Cu site, multi-Cu site, and heterometallic site) is systematically discussed, along with the corresponding catalytic reaction mechanisms. Finally, some existing challenges and potential opportunities for this research direction are provided to guide the rational design of metal-organic coordination compounds for their practical application in electrochemical CO2RR.

Rhodium(I)-Catalyzed Annulation of Bicyclo[1.1.0]butyl-Substituted Dihydroquinolines and Dihydropyridines.

Bicyclo[1.1.0]butane-containing compounds feature a unique chemical reactivity, trigger "strain-release" reaction cascades, and provide novel scaffolds with considerable utility in the drug discovery field. We report the synthesis of new bicyclo[1.1.0]butane-linked heterocycles by a nucleophilic addition of bicyclo[1.1.0]butyl anions to 8-isocyanatoquinoline, or, alternatively, iminium cations derived from quinolines and pyridines. The resulting bicyclo[1.1.0]butanes are converted with high regioselectivity to unprecedented bridged heterocycles in a rhodium(I)-catalyzed annulative rearrangement. The addition/rearrangement process tolerates a surprisingly large range of functional groups. Subsequent chemo- and stereoselective synthetic transformations of urea, alkene, cyclopropane, and aniline moieties of the 1-methylene-5-azacyclopropa[cd]indene scaffolds provide several additional new heterocyclic building blocks. X-ray structure-validated quantum mechanical DFT calculations of the reaction pathway indicate the intermediacy of rhodium carbenoid and metallocyclobutane species.

Facile synthesis of Ni-phyllosilicate assisted by polyacrylamide at room temperature for CO2 hydrogenation to methane

To elucidate the effect of solution viscosity on the synthesis of Ni-phyllosilicate, polyacrylamide was incorporated to create a viscous aqueous medium containing of sodium metasilicate, nickel nitrate and NH4F. The enhanced viscosity promotes the dispersion of the initial formed crystal seeds and the growth of Ni-phyllosilicate, culminating in a Ni-rich NiPs-RT-6 of a high Ni content of up to 55.2 wt%. Residual polyacrylamide elimination was accomplished via calcination, concurrently enhancing metal-support interaction. The as-synthesized samples display a nanoflower morphology with nanospheres overlaid with numerous thin nanosheets. The relatively small Ni particles around 5.7 nm were obtained after reduction even at a very high Ni loading, owing to its strong metal-support interaction. NiPs-RT-6 achieves a CO2 conversion of 75.9% at 450 °C, 0.1 MPa, 60 L·g–1·h–1, which closely approximates thermodynamic equilibrium. The turn over frequency for CO2 (TOFCO2) was substantial, calculated at 3.7 × 10–3 s–1, accompanied by activation energy (Ea) of 80.6 kJ·mol–1. In-situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) further disclosed that m-HCOO– serves as a crucial intermediate following a formate reaction pathway. With its high Ni content, finely distributed Ni particles, and strong metal-support interaction, NiPs-RT-6 demonstrates promising catalytic activity in CO2 methanation.

Mechanochemistry in Organic Synthesis: An Italian Journey through Innovations

Mechanochemistry, as an enabling technology, harnesses mechanical force to drive chemical reactions, presenting compelling advantages in organic synthesis within the principles of green chemistry. This review explores how its unique advantages and alignment with sustainable practices have been widely developed in different scientific fields in Italy. As a transformative strategy for organic synthesis, mechanochemistry has been portrayed in this review as a valuable synthetic alternative due to the various advantages, such as solvent reduction and new reaction pathways, that its use brings. Nonetheless, the improvements brought about by its use have also been crucial in other fields of chemistry described by Italian scientists. In this whole context, Italian researchers have analysed both already optimised processes and new feasible pathways, paving the way for new avenues previously hampered by all the limitations that belong to in‐solution chemistry.

Mechanistic understanding of the acceptorless dehydrogenation reaction catalyzed by low valent Co(I) complex

Coordination complexes based on the first-row transition metal play pivotal role in homogenous catalysis. However, the variable oxidation states and complicated electronic configurations of first-row transition metal centers result in the ambiguous mechanism. Herein, focusing on a typical Co(Ⅰ)-PNP pincer catalyst developed by Madsen et al. (Chemcatchem, 11 (2019) 2707–2712.), the diversity of mechanistic scenarios caused by low valent cobalt complex is displayed and the competition of each plausible reaction pathways were investigated based on density functional theory (DFT) calculation. The calculated results suggest that the MLC mechanism mediated by Co(I) center prevails in different stage among all possible reaction pathways. Further analysis using the activation strain model elucidates the dual active sites in MLC mechanism leads to a higher interaction energy compared with the Co(I/III) mechanism, in which the reaction basically occurs on the metal center. However, in the high spin state, the metal and the ligand cooperate to provide more interaction energy in the activation of chemical bonds, thereby reducing the activation energy barrier. These theoretical findings are anticipated to enhance current understanding of homogeneous catalysis based on 3d low valent metal centers.