Ratio Of Regioisomers Research Articles

N1-Selective Methylation of Pyrazoles via α-Halomethylsilanes as Masked Methylating Reagents.

The development of a highly selective N-methylation of pyrazole heterocycles using commercially available, bench-stable α-halomethylsilanes as masked methylating reagents is described. Sterically bulky α-halomethylsilanes significantly improve the selectivity of N-alkylation over traditional methylating reagents and readily undergo protodesilylation in the presence of a fluoride source and water to give N-methyl pyrazoles. Selectivities of 92:8 to >99:1 N1/N2 regioisomeric ratios were achieved with a range of pyrazole substrates in good yields.

Controlling Reactivity and Selectivity in the Mizoroki-Heck Reaction: High Throughput Evaluation of 1,5-Diaza-3,7-diphosphacyclooctane Ligands.

We report a high throughput evaluation of the Mizoroki-Heck reaction of diverse olefin coupling partners. Comparison of different ligands revealed the 1,5-diaza-3,7-diphosphacyclooctane (P2N2) scaffold to be more broadly applicable than common "gold standard" ligands, demonstrating that this family of readily accessible diphosphines has unrecognized potential in organic synthesis. In particular, two structurally related P2N2 ligands were identified to enable the regiodivergent arylation of styrenes. By simply altering the phosphorus substituent from a phenyl to tert-butyl group, both the linear and branched Mizoroki-Heck products can be obtained in high regioisomeric ratios. Experimental and computational mechanistic studies were performed to further probe the origin of selectivity, which suggests that both ligands coordinate to the metal in a similar manner but that rigid positioning of the phosphorus substituent forces contact with the incoming olefin in a π-π interaction (for P-Ph ligands) or with steric clash (for P-tBu ligands), dictating the regiocontrol.

Electrochemically enabled dearomative [2 + 2] cycloadditions of indoles with alkynes to access cyclobutene-fused indolines

A novel regioselective electrochemical [2 + 2] cyclization of N-acyl indoles with alkynes to provide cyclobutene-fused indolines under mild conditions with high regioisomeric ratios was developed.

Hydroboration of vinylsilanes providing diversity-oriented hydrophobic building blocks for biofunctional molecules.

Hydroboration of vinylsilanes with BH3 affords two silylethanol regioisomers. Herein, we investigated the regioisomeric ratio of hydroboration products from various vinylsilanes, focusing on the characteristic reaction profile. All investigated vinylsilanes afforded both regioisomers, and greater bulkiness increased the proportion of the Markovnikov products. The obtained silylethanols were used as hydrophobic building blocks for constructing nuclear progesterone receptor (PR) modulators. Notably, structural conversions from an α-isomer (silylethan-1-oxy derivative) to a β-isomer (2-silylethoxy derivative) caused complete activity-switching from a PR agonist to an antagonist. Our results indicate that silylethanols are useful for structural development, and vinylsilanes are a versatile source of hydrophobic building blocks for obtaining biofunctional molecules.

Regio‐ and Diastereoselective Conjugate Addition of Grignard Reagents to Chiral Fluoroalkyl α,β‐Unsaturated N‐tert‐Butanesulfinyl Ketimines: Synthesis of Optically Active Fluorinated Enamines and Derivatives

AbstractA regio‐ and diastereoselective conjugate addition reaction of Grignard reagents to fluoroalkyl α,β‐unsaturated N‐tert‐butanesulfinyl ketimines was disclosed. A range of different fluoroalkyls and Grignard reagents were well tolerated, giving up to 99% diastereomeric and regioisomeric ratios. This reaction provided a straightforward method for the synthesis of a variety of enantiomerically enriched α‐fluorinated enamines and derivatives which are difficult to achieve with other methods.

Phosphine Ligand Effects in Nickel-Catalyzed Alkene Migratory Hydroalkylation

AbstractCatalytic alkene hydroalkylation has provided to be an efficient method for synthesizing C(sp3) centers, from readily available and inexpensive alkene starting materials through alkene hydrometallation followed by cross-coupling. One of the major tasks in this field is to develop diverse ligands to achieve regioselective control. Herein, we report the investigation of nickel–triphenylphosphine-catalyzed remote hydroalkylation of alkenyl amides to access α-branched amines. Various alkenes and alkyl iodides are suitable substrates to deliver the desired products with excellent regioselectivities (>20:1 regioisomeric ratio). Density functional theory calculations reveal the reaction mechanism.

Engineering an O‐methyltransferase for the Regioselective Biosynthesis of Hesperetin Dihydrochalcone

AbstractDirected evolution of the O‐methyltransferase ZgOMT from Zooshikella ganghwensis focusing on active site residues resulted in highly regioselective biocatalysts (regioisomeric ratios up to 99 : 1) for the preparation of the taste active hesperetin dihydrochalcone and related compounds. These newly constructed enzyme variants provide an attractive synthesis route for para‐methylation of catechol scaffolds, which is challenging to perform with high regioselectivity utilizing wild‐type O‐methyltransferases.

Regiocontrol via Electronics: Insights into a Ru-Catalyzed, Cu-Mediated Site-Selective Alkylation of Isoquinolones via a C-C Bond Activation of Cyclopropanols.

A site-selective C(3)/C(4)-alkylation of N-pyridylisoquinolones is achieved by employing C-C bond activation of cyclopropanols under Ru(II)-catalyzed/Cu(II)-mediated conditions. The regioisomeric ratios of the products follow directly from the electronic nature of the cyclopropanols and isoquinolones used, with electron-withdrawing groups yielding predominantly the C(3)-alkylated products, whereas the electron-donating groups primarily generate the C(4)-alkylated isomers. Density functional theory calculations and detailed mechanistic investigations suggest the simultaneous existence of the singlet and triplet pathways for the C(3)- and C(4)-product formation. Further transformations of the products evolve the utility of the methodology thereby yielding scaffolds of synthetic relevance.

Analysis of triacylglycerol and phospholipid sn-positional isomers by liquid chromatographic and mass spectrometric methodologies.

Analysis of triacylglycerol (TG) and phospholipid sn-positional isomers can be divided into two main categories: (a) direct separation by chromatography or other means such as ion mobility mass spectrometry and (b) quantification of regioisomer ratios by structurally informative fragment ions with mass spectrometric methods. Due to long retention times and limited performance, researchers are moving away from direct chromatographic separation of isomers, using mass spectrometry instead. Many established analytical methods are targeting specific isomers of interest instead of untargeted analysis of comprehensive profiles of regioisomers. Challenges remain arising from the large number of isobaric and isomeric lipid species in natural samples, often overlapping chromatographically and sharing structurally informative fragment ions. Further, fragmentation of glycerolipids is influenced by the nature of the attached fatty acids, and the lack of available regiopure standards is still an obstacle for establishing calibration curves required for accurate quantification of regioisomers. Additionally, throughput of many methods is still quite limited. Optimization algorithms and fragmentation models are useful especially for analysis of TG regioisomers, as identification using calibration curves alone without proper separation is difficult with complex samples.

Nickel-Catalyzed Remote Asymmetric Hydroalkylation of Alkenyl Ethers to Access Ethers of Chiral Dialkyl Carbinols.

Site- and enantio-selective alkyl-alkyl bond formation is privileged in the retrosynthetic analysis due to the universality of sp3-hybridized carbon atoms in organic molecules. Herein, we report a nickel-catalyzed remote asymmetric hydroalkylation of alkenyl ethers via synchronous implementation of alkene isomerization and enantioselective C(sp3)-C(sp3) bond formation. Regression analysis of catalyst structure-activity relationships accelerates the rational ligand modification through modular regulation. This reaction has several advantages for synthesizing chiral dialkyl carbinols and their ether derivatives, including the broad substrate scope, good functional group tolerance, excellent regioselectivity (>20:1 regioisomeric ratio), and high enantioselectivity (up to 95% enantiomeric excess).

Quantitative analysis of steric effects on the regioselectivity of the Larock heteroannulation reaction.

Alkylphenylacetylene derivatives were synthesized and used as reactants in the Larock heteroannulation reaction to investigate the steric influence on regioselectivity. Large alkyl groups preferentially yielded 2-alkyl-3-phenylindole products, while smaller alkyl groups provided 3-alkyl-2-phenylindole as major products. The logarithm of regioisomeric product ratios exhibited good correlations with various steric parameters. Notably, the Charton values provided the best correlation when excluding the cyclopropyl group. In addition, the Boltzmann-weighted Sterimol parameter (wSterimol) was utilized to generate a good predictive model, indicating the B1 wSterimol as the significant regiochemical determining parameter with no obvious deviation for the cyclopropyl group. Relative atomic distances within the DFT-optimized transition state structures revealed good correlations with the logarithm of regioisomeric ratios. Furthermore, the cyclopropyl adsorption complex indicated electronic contribution, explaining the peculiar behavior of this substituent in the experimental observation.

Solid-state silica gel-catalyzed synthesis of fluorescent polysubstituted 1,4- and 1,2-dihydropyridines.

We present the green, highly atom-economical, solid-state silica gel-catalyzed synthesis of polysubstituted 1,4- and 1,2-dihydropyridines (DHPs) from commercially available materials, amines and ethyl propiolate. The DHP skeleton was assembled by heating the reactants and silica gel in a closed vessel. Aliphatic amines provided 1,4-isomers as the main or only DHP products, but the reactions of aromatic amines yielded a mixture of 1,4- and 1,2-isomers. To the best of our knowledge, this is the first example of the formation of a 1,2-DHP structure by the reaction of an amine with propiolic ester. Addition of 1 mass percent of H2SO4 to silica gel shifted the product distribution to 1,4-DHP as the main or the only isomer obtained. Experimental and theoretical analyses led to the identification of two key intermediates en route to DHPs and the explanation of the observed regioisomeric ratios. 1,2-DHPs show blue-cyan fluorescence in MeOH with the quantum yield Φ = 0.10-0.22 relative to quinine sulfate Φ = 0.58 and 1,4-DHPs show blue-violet fluorescence with Φ = 0.09-0.81.

1,1-Regioselective alkenylboration of styrenes enabled by palladium catalysis

Despite the 1,2-difunctionalization reactions of styrenes have been well developed, the 1,1-regioselective addition reaction remains challenging. We disclose herein a palladium-catalyzed, highly 1,1-regioselective alkenylboration of styrenes by using alkenyl triflates and a diboron reagent as the coupling partners. A wide scope of styrenes derivatives and alkenyl triflates participate this reaction to provide the corresponding allyl boronates with high regioisomeric ratios. The success of this reaction is ascribed to the application of 1,10-phenanthroline-derivated ligand and the addition of ammonium chloride salt. Moreover, acrylate esters can also selectively afford the 1,1-alkenylboration products under the same reaction conditions.

Light‐Triggered Nickel‐Catalyzed Azide−Alkyne Cycloaddition for the Preparation of 1,5‐Disubstituted 1,2,3‐Triazoles

AbstractWhen irradiated by UVA, a Ni(II) precatalyst integrating a benzophenone chromophore in its structure catalyzes the regioselective cycloaddition of alkynes and azides to produce 1,5‐disubsituted 1,2,3‐triazoles with 1,5:1,4 regioisomer ratios ranging from 1.7:1 to >20:1. Speciation and reactivity studies revealed that the reaction most likely proceeds through a Ni(I)/Ni(III) catalytic cycle.magnified image

What the Heck?-Automated Regioselectivity Calculations of Palladium-Catalyzed Heck Reactions Using Quantum Chemistry.

We present a quantum chemistry (QM)-based method that computes the relative energies of intermediates in the Heck reaction that relate to the regioselective reaction outcome: branched (α), linear (β), or a mix of the two. The calculations are done for two different reaction pathways (neutral and cationic) and are based on r 2SCAN-3c single-point calculations on GFN2-xTB geometries that, in turn, derive from a GFNFF-xTB conformational search. The method is completely automated and is sufficiently efficient to allow for the calculation of thousands of reaction outcomes. The method can mostly reproduce systematic experimental studies where the ratios of regioisomers are carefully determined. For a larger dataset extracted from Reaxys, the results are somewhat worse with accuracies of 63% for β-selectivity using the neutral pathway and 29% for α-selectivity using the cationic pathway. Our analysis of the dataset suggests that only the major or desired regioisomer is reported in the literature in many cases, which makes accurate comparisons difficult. The code is freely available on GitHub under the MIT open-source license: https://github.com/jensengroup/HeckQM.

Ligand-Controlled Cobalt-Catalyzed Regiodivergent Alkyne Hydroalkylation.

Regiodivergent alkyne hydroalkylation to generate different isomers of an alkene from the same alkyne starting material would be beneficial; however, it remains a challenge. Herein, we report a ligand-controlled cobalt-catalyzed regiodivergent alkyne hydroalkylation. The sensible selection of bisoxazoline (L1) and pyridine-oxazoline (L8) ligands led to reliable and predictable protocols that provided (E)-1,2-disubstituted and 1,1-disubstituted alkenes with high E/Z stereoselectivity and regioisomeric ratio starting from identical terminal alkyne and alkyl halide substrates and produced trisubstituted alkenes in the case of internal alkynes. This method exhibits a broad scope for terminal and internal alkynes with a wide range of activated and unactivated alkyl halides and shows excellent functional group compatibility.

Synthesis, spectroscopy, and crystallography of magnesium, aluminum, and zinc complexes supported by a tridentate ketoiminate

The Schiff base condensation of 8-aminoquinoline with 2-acetylcyclopentanone yielded two regioisomeric β-ketoimines with a cyclopentanyl ring in the ketoimine backbone and a pendant quinolyl moiety. The major ketoimine, isolated in 64% yield, showed quinolyl addition to the cyclopentanyl ring, and it was characterized spectroscopically and crystallographically. This ketoimine was utilized to prepare a series of bis-ligated homoleptic magnesium, aluminum, and zinc complexes in 78–96% yield as well as aluminum and zinc ketoiminate phenoxide complexes in 68 and 66% yield, respectively. The five complexes were characterized spectroscopically and crystallographically, and the bis-ligated complexes showed distorted octahedral geometries. The aluminum phenoxide complex showed a monomeric, five-coordinate metal center (τ5 = 0.83) while the zinc phenoxide complex displayed a dimeric structure with two five-coordinate zinc centers (τ5 = 0.39 and 0.53) with bridging phenoxide and ketoiminate ligands, where idealized trigonal bipyramidal geometry τ5 = 0.00 and idealized square pyramidal τ5 = 1.00. The zinc phenoxide showed unexpected fluxional bonding character which was explored with VT-NMR from 220 to 325 K and is proposed to be dimer disproportionation to monomeric zinc complexes. Density Functional Theory (DFT) and Time-Dependent DFT calculations were used to investigate the regioisomeric ratio of the ketoimines and map the electronic structures for the ketoimines and complexes, providing insight into the nature of the observed electronic transitions.

Palladium(II)-Catalyzed Selective Arylation of Tertiary C-H Bonds of Cyclobutylmethyl Ketones Using Transient Directing Groups.

We report the first example of selective PdII -catalyzed tertiary C-H activation of cyclobutylmethyl ketones using a transient directing group. An electron-deficient 2-pyridone ligand was identified as the optimal external ligand to enable tertiary C-H activation. A variety of cyclobutylmethyl ketones bearing quaternary carbon centers was readily accessed without preinstalling internal directing groups in up to 81 % yield and >95 : 5 regioisomeric ratios of tertiary C-H arylation to β-methylene (β-methyl) or γ-C-H arylation.

Palladium(II)‐Catalyzed Selective Arylation of Tertiary C−H Bonds of Cyclobutylmethyl Ketones Using Transient Directing Groups

AbstractWe report the first example of selective PdII‐catalyzed tertiary C−H activation of cyclobutylmethyl ketones using a transient directing group. An electron‐deficient 2‐pyridone ligand was identified as the optimal external ligand to enable tertiary C−H activation. A variety of cyclobutylmethyl ketones bearing quaternary carbon centers was readily accessed without preinstalling internal directing groups in up to 81 % yield and >95 : 5 regioisomeric ratios of tertiary C−H arylation to β‐methylene (β‐methyl) or γ‐C−H arylation.

A relay catalysis strategy for enantioselective nickel-catalyzed migratory hydroarylation forming chiral α-aryl alkylboronates

A relay catalysis strategy for enantioselective nickel-catalyzed migratory hydroarylation forming chiral α-aryl alkylboronates