Heterogeneous Electron Transfer Rate Research Articles

Elucidation of Design Criteria for V-based Redox Mediators: Structure-Function Relationships that Dictate Rates of Heterogeneous Electron Transfer.

Redox mediators are attractive solutions for addressing the stringent kinetic stipulations required for efficient energy conversion processes. In this work, we compare the electrochemical properties of four vanadium complexes, namely [V(acac)3], [V6O7(OMe)12], [nBu4N]3[V6O13(TRISNO2)2], and [nBu4N]5[V18O46(NO3)] in non-aqueous solutions on glassy carbon electrodes. The goal of this study is to investigate the electron transfer kinetics and diffusivity of these compounds under identical experimental conditions to develop an understanding of structure-function relationships that dictate the physicochemical properties of vanadium oxide assemblies. Complex selection was dictated by two criteria - (1) nuclearity of the transition metal complexes (2) distribution of electron density in the native electronic configuration. Our analyses establish that electronic communication between metal centers significantly impacts charge transfer kinetics of these vanadium-based compounds.

Trivalent Cations Slow Electron Transfer to Macrocyclic Heterobimetallic Complexes.

Incorporation of secondary redox-inactive cations into heterobimetallic complexes is an attractive strategy for modulation of metal-centered redox chemistry, but quantification of the consequences of incorporating strongly Lewis acidic trivalent cations has received little attention. Here, a family of seven heterobimetallic complexes that pair a redox-active nickel center with La3+, Y3+, Lu3+, Sr2+, Ca2+, K+, and Na+ (in the form of their triflate salts) have been prepared on a heteroditopic ligand platform to understand how chemical behavior varies across the comprehensive series. Structural data from X-ray diffraction analysis demonstrate that the positions adopted by the secondary cations in the crown-ether-like site of the ligand relative to nickel are dependent primarily on the secondary cations' ionic radii and that the triflate counteranions are bound to the cations in all cases. Electrochemical data, in concert with electron paramagnetic resonance studies, show that nickel(II)/nickel(I) redox is modulated by the secondary metals; the heterogeneous electron-transfer rate is diminished for the derivatives incorporating trivalent metals, an effect that is dependent on steric crowding about the nickel metal center and that was quantified here with a topographical free-volume analysis. As related analyses carried out here on previously reported systems bear out similar relationships, we conclude that the placement and identity of both the secondary metal cations and their associated counteranions can afford unique changes in the (electro)chemical behavior of heterobimetallic species.

Benchmarking Trisaminocyclopropeniums as Mediators for Anodic Oxidation Reactions.

This report benchmarks a tris(amino)cyclopropenium (TAC) salt as an electron-transfer mediator for anodic oxidation reactions in comparison to two known mediators: a triarylamine and a triarylimidazole derivative. The three mediators have redox potentials, diffusion coefficients, and heterogeneous electron transfer rates similar to those of glassy carbon electrodes in acetonitrile/KPF6. However, they differ significantly in their performance in two electro-organic reactions: anodic fluorination of a dithiane and anodic oxidation of 4-methoxybenzyl alcohol. These differences are rationalized based on variable stability in the presence of reaction components (e.g., NEt3·3HF, lutidine, and Cs2CO3) as well as very different rates of electron transfer with the organic substrate. Overall, this work highlights the advantages and disadvantages of each mediator and provides a foundation for expanding the applications of TACs in electro-organic synthesis moving forward.

Novel Ce(OH)CO3/carbon nanotubes hybrid material towards a highly sensitive electrochemical dopamine determination in real urine samples

Cerium hydroxycarbonate and multiwalled carbon nanotubes (Ce(OH)CO3/CNT), drop-casted onto a glassy carbon (GC) electrode and electrochemically treated (tCe(OH)CO3/CNT) has been obtained as a new hybrid material. tCe(OH)CO3/CNT was characterized through SEM, FT-IR, UV–Vis, and electrochemical techniques such as cyclic voltammetry (CV) with different redox couples as Fe2+/3+, Fe(CN)63-/4− or Ru(NH3)62+/3+and electrochemical impedance spectroscopy (EIS) measurements with Fe(CN)63-/4−. The charge transfer resistance (RCT) value of tCe(OH)CO3/CNT was up to two orders of magnitude lower than the RCT of bare GC electrodes and these results were confirmed by the effective heterogeneous electron transfer rate constant values (k°eff, 2.4 10−3 vs 7.0 10−4, respectively). The calibration curve of DA exhibits a linear response within the range of 0.1 and 70 μmol L−1 with a correlation coefficient (R2) of 0.987 (n = 3) and a limit of detection of 0.003 μmol L−1. Inorganic and organic interferents do not alter significatively the selectivity. The electrochemical treatment of Ce(OH)CO3 and CNT generates a modified electrode which successfully combines the selectivity of Ce towards catechol with the high conductivity of CNT presenting an ideal performance for the electrochemical DA determination in 5 real urine samples (1.94 μmol L−1 in a 1:20 dilution) using differential pulse voltammetry (DPV) with an RSD < 6.1 %.

Fe Single-Atom Carbon Dots Nanozyme Collaborated with Nucleic Acid Exonuclease III-Driven DNA Walker Cascade Amplification Strategy for Circulating Tumor DNA Detection.

Circulating tumor DNA (ctDNA), as a next-generation tumor marker, enables early screening and monitoring of cancer through noninvasive testing. Exploring the development of new methods for ctDNA detection is an intriguing study. In this work, a unique electrochemical biosensor for the ctDNA detector was constructed in the first utilizing Fe single-atom nanozymes-carbon dots (SA Fe-CDs) as a signaling carrier in collaboration with a DNA walker cascade amplification strategy triggered by nucleic acid exonuclease III (Exo III). The electrochemical active surface area of AuNPs/rGO modified onto a glassy carbon electrode (AuNPs/rGO/GCE) was about 1.43 times that of a bare electrode (bare GCE), with good electrical conductivity alongside a high heterogeneous electron transfer rate (5.81 × 10-3 cm s-1), that is, as well as the ability to load more molecules. Sequentially, the DNA walker cascade amplification strategy driven by Exo III effectively converted the target ctDNA into an amplified biosignal, ensuring the sensitivity and specificity of ctDNA. Ultimately, the electrochemical signal was further amplified by introducing SA Fe-CDs nanozymes, which could serve as catalysts for 3,3',5,5'-tetramethylbenzidine (TMB) oxidation with facile responding (Vmax = 0.854 × 10-6 M s-1) and robust annexation (Km = 0.0069 mM). The integration of the triple signal amplification approach achieved detection limits as low as 1.26 aM (S/N = 3) for a linearity spanning from 5 aM to 50 nM. In this regard, our proposal for a biosensor with exceptional assay properties in complicated serum environments had great potential for early and timely diagnosis of cancer.

Microbiologically influenced corrosion can cause a dental implant rejection

In the present study, we apply electrochemical and molecular biology approaches to establish whether microbiologically influenced corrosion (MIC) may be the reason for dental implant rejection. Titanium-based implants have been incubated in vitro in Ringer/glucose solution in the presence and absence of a salivary microbiota and the change in their corrosion potential and current density was monitored over time by potentiodynamic polarization. The charge transfers processes occurring on the Ti-based implant surface during the initial bacterial adhesion and after biofilm formation were analyzed by electrochemical impedance spectroscopy. The components of the equivalent electrical circuit as well as the heterogeneous electron transfer rate constants were estimated. In parallel, bacterial species from the salivary microbiota have been identified by sequencing of the 16S ribosomal amplicon method, and their contribution to the corrosion processes of dental implants was verified and compared to that of native saliva in vitro. The scanning electron microscopy observation and energy dispersive spectroscopy analysis of the implant surface after long-term exposure to a bacterial-containing environment revealed more detailed features of the occurring corrosion processes.

Reviving the absorbent chemistry of electrochemically mediated amine regeneration for improved point source carbon capture

Electrochemically mediated amine regeneration (EMAR) is emerging as a promising electrochemical approach for carbon capture from point sources. In this study, for the first time, the absorbent chemistry of the EMAR process was revived by considering criteria beyond metal-amine complexation. The systematic investigation focused on using second amines, which were previously overlooked in EMAR due to limited metal-amine interaction, despite their proven effectiveness in conventional carbon capture processes. The integration of second amines— monoethanolamine (MEA), aminomethyl propanol (AMP), and methyldiethanolamine (MDEA)—with the benchmark ethylenediamine (EDA) was thoroughly studied, evaluating their impact on absorption and desorption kinetics and capacities, and electrochemical performance. Among the blends, EDA + MDEA emerged as the top performer, particularly excelling in electrochemical aspects. The charge transfer resistance (RCT) of the deposition reaction, as the rate-limiting step, for the EDA + MDEA blend was reduced by 40 % compared to pure EDA, and the heterogeneous electron transfer rate constant (k0) improved threefold. In the bench-scale assessments, the EDA + MDEA blend showed a notable decrease in desorption energetics to 37 kJ/molCO2, marking a 34 % reduction compared to the 56 kJ/molCO2 required for pure EDA. This marks the lowest reported energetics for an EMAR process targeting point source carbon capture. This research paves the way for future systematic investigations of a wider range of amine blends for EMAR and eventually the process implementation at larger scales.

Comparison of Different Electrochemical Methodologies for Electrode Reactions: A Case Study of Paracetamol

Understanding electrochemical reactions at the surface of electrodes requires the accurate calculation of key parameters—the transfer coefficient (α), diffusion coefficient (D0), and heterogeneous electron transfer rate constant (k0). The choice of method to calculate these parameters requires careful consideration based on the nature of the electrochemical reaction. In this study, we conducted the cyclic voltammetry of paracetamol to calculate the values of these parameters using different methods and present a comparative analysis. Our results demonstrate that the Ep − Ep/2 equation for α and the modified Randles–Ševčík equation for D0 is particularly effective for the calculations of these two parameters. The Kochi and Gileadi methods are reliable alternatives for the calculation of k0. Nicholson and Shain’s method using the equation k0 = Ψ(πnD0Fν/RT)1/2 gives the overestimated values of k0. However, the value of k0 calculated using the plot of ν−1/2 versus Ψ (from the Nicholson and Shain equation, where ν is scan rate) agrees well with the values calculated from the Kochi and Gilaedi methods. This study not only identifies optimal methodologies for quasi-reversible reactions but also contributes to a deeper understanding of electrochemical reactions involving complex electron transfer and coupled chemical reactions, which can be broadly applicable in various electrochemical studies.

Efficient Electrochemical Lead Detection by a Histidine-Grafted Metal-Organic Framework MOF-808 Electrode Material.

As the excessive presence of heavy metals in the environment significantly affects human health, it becomes necessary to develop efficient, selective, and sensitive methods for their detection. In this study, a novel electrochemical sensor for the detection of Pb2+ ions is described. The proposed sensor is based on a glassy carbon electrode (GCE) modified by a thin film of histidine-grafted metal-organic framework (MOF-808-His). The MOF-808 was obtained solvothermally, and then postsynthetically modified by substituting the coordinated acetate with histidinate. By electrochemistry, the MOF-808-His-modified GCE demonstrated high charge selectivity, while electrochemical impedance spectroscopy (EIS) and kinetic studies gave a lower charge transfer resistance (4196 Ω) and a better standard heterogeneous electron transfer rate constant (1.80 × 10-5 cm s-1) on MOF-808-modified GCE. These results indicated a swift and direct electron transfer rate from [Fe(CN)6]3-/4- to the electrode surface. Using square wave anodic stripping voltammetry (SWASV), the rapid and highly sensitive determination of Pb2+ was achieved on MOF-808-His-modified GCE. By optimizing the accumulation-detection parameters including pH of the detection medium, deposition time and potential, and concentration, a remarkable limit of detection (LoD, based on a signal-to-noise ratio of 3) of (1.12 × 10-10 ± 0.10 × 10-10) mol L-1 was obtained, with a sensitivity of (9.6 ± 0.1) μA L μmol-1. After interference and stability studies, the MOF-808-His-modified GCE was applied to the detection of Pb2+ in a tap water sample with a concentration of 10 μmol L-1 Pb2+.

Regulation of heterogeneous electron transfer reactivity by defect engineering through electrochemically induced brominating addition.

Enhancing the electrochemical activity of graphene holds great significance for expanding its applications in various electrochemistry fields. In this study, we have demonstrated a facile and quantitative approach for modulating the defect density of single-layer graphene (SLG) via an electrochemically induced bromination process facilitated by cyclic voltammetry. This controlled defect engineering directly impacts the heterogeneous electron transfer (HET) rate of SLG. By utilizing Raman spectroscopy and scanning electrochemical microscopy (SECM), we have established a correlation between the HET kinetics and both the defect density (nD) and mean distance between defects (LD) of SLG. The variation of the HET rate (k0) with the defect density manifested a distinctive three-stage behavior. Initially, k0 increased slightly with the increasing nD, and then it experienced a rapid increase as nD further increased. However, once the defect density surpassed a critical value of about 1.8 × 1012 cm-2 (LD < 4.2 nm), k0 decreased rapidly. Notably, the results revealed a remarkable 35-fold enhancement of k0 under the optimal defect density conditions compared to pristine SLG. This research paves the way for controllable defect engineering as a powerful strategy to enhance the electrochemical activity of graphene, opening up new possibilities for its utilization in a wide range of electrochemical applications.

Electronic structure modification of metal phthalocyanines by a carbon nanotube support for efficient oxygen reduction to hydrogen peroxide.

An active and selective two-electron oxygen reduction reaction (2e- ORR) is required for efficient electrosynthesis of H2O2. This reaction can be promoted by metal phthalocyanines (MPcs), which serve as model catalysts with well-defined structures. MPc molecules have mostly been evaluated on conductive carbon-based substrates, including glassy carbon (GC) and carbon nanotubes (CNTs), yet their influence on the electrocatalytic properties is not well understood. This study demonstrated that the ORR activity per surface area was improved by up to 4-fold with MPc molecules supported on CNTs (MPc/CNTs, M = Co, Mn, and Fe) compared to MPc loaded directly on GC. Ultraviolet photoelectron spectroscopy and density functional theory calculations revealed that the CNTs modified the electronic structure of the MPc molecules to optimize the *OOH binding energy and boost the heterogeneous electron transfer rates. Detailed kinetic analysis enabled multiple reaction pathways to be decoupled to extract the metal-dependent intrinsic 2e-/4e- ORR activities. Finally, MPc/CNT catalysts were employed in an H2O2 electrosynthesis flow cell, which delivered an industrial-scale current density of -200 mA cm-2 and an H2O2 faradaic efficiency of 88.7 ± 0.6% with the CoPc/CNT catalyst in a neutral electrolyte.

An on-site and portable electrochemical sensing platform based on spinel zinc ferrite nanoparticles for the quality control of paracetamol in pharmaceutical samples.

In this study, crystalline spinel zinc ferrite nanoparticles (ZnFe2O4 NPs) were successfully prepared and proposed as a high-performance electrode material for the construction of an electrochemical sensing platform for the detection of paracetamol (PCM). By modifying a screen-printed carbon electrode (SPE) with ZnFe2O4 NPs, the electrochemical characteristics of the ZnFe2O4/SPE and the electrochemical oxidation of PCM were investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), chronoamperometry (CA), and differential pulse voltammetry (DPV) methods. The calculated electrochemical kinetic parameters from these techniques including electrochemically active surface area (ECSA), peak-to-peak separation (ΔEp), charge transfer resistance (Rct), standard heterogeneous electron-transfer rate constants (k0), electron transfer coefficient (α), catalytic rate constant (kcat), adsorption capacity (Γ), and diffusion coefficient (D) proved that the as-synthesized ZnFe2O4 NPs have rapid electron/mass transfer characteristics, intrinsic electrocatalytic activity, and facilitate the adsorption-diffusion of PCM molecules towards the modified electrode surface. As expected, the ZnFe2O4/SPE offered excellent analytical performance towards sensing of PCM with a detection limit of 0.29 μM, a wide linear range of 0.5-400 μM, and high electrochemical sensitivity of 1.1 μA μM-1 cm-2. Moreover, the proposed ZnFe2O4-based electrochemical nanosensor also exhibited good repeatability, high anti-interference ability, and practical feasibility toward PCM sensing in a pharmaceutical tablet. Based on these observations, the designed electrochemical platform not only provides a high-performance nanosensor for the rapid and highly efficient detection of PCM but also opens a new avenue for routine quality control analysis of pharmaceutical formulations.

The effect of gold nanostructure morphology on label-free electrochemical immunosensor design

In this research, various electrodeposition techniques were used to form gold nanostructures (AuNSs) on the surface of graphite rod electrode (GE). Three distinct AuNS morphologies on GE have been achieved based on the composition of electrodeposition solution. The use of H2SO4 as a supporting electrolyte resulted in the formation of smaller but more numerous AuNSI with a modified electrode’s electroactive surface area (EASA) of 0.213 cm2. Exchanging the supporting electrolyte to KNO3 and increasing HAuCl4 concentration facilitated the formation of bigger AuNSII particles with electrode EASA of 0.116 cm2. Finally, a partial coverage of GE by branched gold nanostructures (AuNSIII) was achieved with an estimated EASA of 0.110 cm2, when the HAuCl4 and KNO3 concentrations were increased. Estimated values of heterogeneous electron transfer rate constant did not depend on AuNS morphology. Electrode modified with AuNSI exhibited the highest bovine serum albumin (BSA) immobilization efficiency and the highest relative response for the detection of specific polyclonal antibodies against BSA (p-anti-BSA) compared to other modified electrodes. The limit of p-anti-BSA detection in PBS buffer was calculated as 0.63 nM, while in blood serum it was 0.71 nM. Linear ranges were from 1 to 7 nM and from 1 to 5 nM, respectively.

Sustainable Laser Induced Supercapacitors from Cork Natural Substrates

A novel type of eco-friendly and cost-effective supercapacitor has been developed by fabricating interdigitated and squared supercapacitors made of porous graphitic carbon electrodes and Polyvinyl alcohol (PVA) electrolyte. The electrodes were fabricated using a simple, fast, and low-cost laser engraving process, using visible irradiation wavelengths (450 nm) and performed under ambient conditions, resulting in highly three-dimensional, electrically conductive, and porous graphitic carbon structures.By adjusting the laser power and wavelength, it was possible to produce electrode materials with highly porous and high surface area morphology, which are promising for electrochemical applications. Spectral investigation using Raman and FTIR spectroscopies confirmed the formation of graphitic carbon structures and the full conversion of the cork precursor under visible laser irradiation.The obtained electrodes exhibited excellent supercapacitive behavior when exposed to a PVA electrolyte, achieving a specific areal capacitance of up to 11.24 mF/cm2 with PVA at 30% laser power. The supercapacitive properties showed excellent stability over time, with no significant loss after 10000 charge/discharge cycles.To evaluate the performance of the new supercapacitors, linear electrodes were used as working electrodes in a three-electrode configuration electrochemical cell. The electrodes showed diffusion-limited electrochemical behavior with fast heterogeneous electron transfer rates (HET), which was superior to that of traditional glassy carbon electrodes.The innovative and efficient electrode fabrication method presented in this study, which utilizes low-cost instrumentation, environmentally friendly fabrication methods, and Earth-abundant precursor materials, shows great promise for producing large-scale "green" electrochemical sensing platforms and devices in the future.

Electrochemical Evaluation of Manganese Electrolytes for Redox Flow Batteries

Redox flow batteries (RFBs) are promising candidates for long-duration energy storage mainly due to the lower cost of improving the energy density compared to lithium-ion batteries. However, the full sustainability of RFBs has not been achieved yet, and there is a lot of room for further improvement. One of the main parameters showing a strong influence on the sustainability of RFBs is redox active materials. In this work, manganese was selected for electrochemical evaluation as it fulfills the sustainability requirements. Manganese is a non-toxic, low-cost and abundant material with sufficient aqueous solubility[1]. Moreover, the standard potential of manganese (1.51 V) is higher than that of vanadium (1.26 V).For electrochemical parameters, we have, through cyclic voltammetry (CVs) and polarization curves, estimated the diffusion coefficient (D0 ) and heterogeneous standard electron transfer rate (k 0) of manganese in an acidic electrolyte in the presence of titanium as an additive. In order to investigate the performance of an RFB system using a manganese electrolyte, a hybrid system was designed that uses hydrogen gas on the negative side and an acidic manganese electrolyte the positive side. We have studied the resistance behavior of the hybrid RFB through electrochemical impedance spectroscopy at different states of charge. From EIS data, cell ohmic resistance, and a general idea of the different processes taking place at different state of charge were obtained. Moreover, we studied the performance of the hybrid RFB during 70 cycles, obtaining an average coulombic efficiency of 98.1%, voltage efficiency of 77.8% and capacity retention of 97.7%. Carney, J.R., B.R. Dillon, and S.P. Thomas, Recent Advances of Manganese Catalysis for Organic Synthesis. European Journal of Organic Chemistry, 2016. 2016(23): p. 3912-3929.

(Invited) The Effect of Surfactants on Vanadium Electrochemistry in Porous Carbon Electrodes

We present a study of vanadium electrochemistry in porous electrodes with and without sodium dodecyl sulfate (SDS) additives present. Carbon paper and felt electrodes are compared. Carbon felt electrodes are the de facto standard in flow batteries. There are significant differences in the electronic conductivity of these media. The carbon paper has a much higher conductivity than the felt, which has an electronic conductivity similar to the ionic conductivity of the electrolytes used. The latter fact motivates an extension of available theory for polarization curve fitting to explicitly include both electronic and ionic contributions in the porous electrode. We demonstrate agreement between our model and an existing model evaluated at the limit where electrode conductivity is significantly greater than electrolyte conductivity. Our model uses the product of the electrode surface area per volume ratio and the heterogeneous electron transfer rate constant, and the Damköhler number as fitting parameters for carbon paper and felt electrodes. We discuss the effect of SDS additives on kinetics in the context of the cation hydration shell for the vanadium ions. To this point, we apply Marcus-Hush-Chidsey formalism to our porous electrode model to quantify reorganization energies obtained through polarization curve fitting. This work was supported as part of the Breakthrough Electrolytes for Energy Storage (BEES2), an Energy Frontier Research Center funded by the United States. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0019409.

Fast Fourier-Transform Impedance Spectroscopy Applied to Electrochemical Sensors

We show that using fast Fourier transform electrochemical impedance spectroscopy (FFT-EIS) to interrogate electrochemical aptamer-based biosensors leads to improved (here better than 2 s) time resolution and calibration-free operation, even when such sensors are deployed in vivo. Because this approach uses the heterogeneous electron transfer rate constant as a means of monitoring target concentration, rather than absolute current, it is independent of both sensor-to-sensor fabrication variation and the drift arising due to fouling in biological fluids, rendering the technique suitable for performing calibration-free in vivo measurements. To showcase these benefits, we demonstrate the approach’s ability to perform real-time molecular measurements in the veins of living rats.

Highly efficient dye-sensitized solar cells achieved by matching energy levels between pseudohalogen redox couples and organic donor−π−acceptor cyanoacrylic acid dyes

A good match of energy levels between dyes and redox couples is an important factor to reduce energy loss and further improve the power conversion efficiency of dye-sensitized solar cells (DSSCs). Pseudohalogens were introduced as an improved alternative to iodide/triiodide (I−/I3−) couples to achieve this goal. Herein, we used SCN−/(SCN)2 and SeCN−/(SeCN)2 as redox couples combined with organic donor-π-acceptor cyanoacrylic acid dyes, 3-{5-[N,N-Bis(9,9-dimethylfluoren-2 -yl)phenyl]thieno[3,2-b]thiophene-2-yl}-2-cyano-acrylic acid (C201) and 3-{5-[N,N-bis(4-diphenylamino)pheny]thieno[3,2-b]thiophen-2-yl}-2-cyano-acrylic acid (C207), respectively. Appropriate combination of SeCN−/(SeCN)2 couple (0.54 V vs. NHE) and C207 dye (0.75 V vs. NHE) yield an overall efficiency of 6.96 ± 0.54 %, which is comparable to the widely used I−/I3− couples. Moreover, at the optimized SCN−/(SCN)2 concentration ratio (25mM/100 mM), the C201-based DSSCs achieved an efficiency up to 8.62 ± 0.44 %, and the performance was 16 % higher than that of I−/I3− couples. The origin of this improvement was found to be the efficient regeneration of C201 dye with a reduced energy loss at a driving force of 0.19 eV using the SCN−/(SCN)2 couple. The electrochemical transient photovoltage decay spectroscopy studies further reveal that the pseudohalogen redox couples increases the redox potential to benefit the photovoltage of the cell and increase the electron lifetime. These results show the potential of exploiting redox couples with suitable heterogeneous electron-transfer rates and energy levels matched to selected dyes.

A Disposable Carbon-Based Electrochemical Cell Modified with Carbon Black and Ag/δ-FeOOH for Non-Enzymatic H2O2 Electrochemical Sensing

Hydrogen peroxide (H2O2) is an essential analyte for detecting neurodegenerative diseases and inflammatory processes and plays a crucial role in pharmaceuticals, the food industry, and environmental monitoring. However, conventional H2O2 detection methods have drawbacks such as lengthy analysis times, high costs, and bulky equipment. Non-enzymatic sensors have emerged as promising alternatives to overcome these limitations. In this research, we introduce a simple, portable, and cost-effective non-enzymatic sensor that uses carbon black (CB) and silver nanoparticle-modified δ-FeOOH (Ag/δ-FeOOH) integrated into a disposable electrochemical cell (DCell). Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and electrochemical impedance spectroscopy (EIS) confirmed successful CB and Ag/δ-FeOOH immobilization on the DCell working electrode. Electrochemical investigations revealed that the DCell-CB//Ag/δ-FeOOH sensor exhibited an approximately twofold higher apparent heterogeneous electron transfer rate constant than the DCell-Ag/δ-FeOOH sensor, capitalizing on CB’s advantages. Moreover, the sensor displayed an excellent electrochemical response for H2O2 reduction, boasting a low detection limit of 22 µM and a high analytical sensitivity of 214 μA mM−1 cm−2. Notably, the DCell-CB//Ag/δ-FeOOH sensor exhibited outstanding selectivity for H2O2 detection, even in potential interferents such as dopamine, uric acid, and ascorbic acid. Furthermore, the sensor has the right qualities for monitoring H2O2 in complex biological samples, as evidenced by H2O2 recoveries ranging from 92% to 103% in 10% fetal bovine serum. These findings underscore the considerable potential of the DCell-CB//Ag/δ-FeOOH sensor for precise and reliable H2O2 monitoring in various biomedical and environmental applications.

Two step electrochemical redox mechanism of cu2+ through kinetic parameters and digital simulation technique

Cycle voltammetric behaviour of Cu(II)SO4 in aqueous NaCl (supporting electrolyte) has been explored in comprehensive manner. 5 mM Cu2+, 1.0 M NaCl and glass carbon (GC) reveals the optimum response. Two stage electromechanical redox EE mechanism [(Cu2+/Cu+) and (Cu+/ Cu0)] has been explored by using different theoretical and experimental methods. The mass transfer co-efficient, dimensionless parameters and heterogeneous electron transfer rate constant ( confirmed the quasi-reversible response of (Cu2+/Cu+) redox couple. The experimental Gileadi ( and simulated Digi Sim ( values found as 0.052 cm/s and 0.0012 cm/s respectively. The diffusion co-efficient (D) of (Cu2+/Cu+) redox couple computed from 9.96 X 10-6 to 4.43 X 10-6 cm2/s through different methods. The novelty of the present work is to confirm the quasi-reversible response of (Cu2+/Cu+) through obtained electrochemical and kinetic parameters by using simple, fast, and cost-effective technique.