Intramolecular Electron Transfer Rate Research Articles

Regulation Mechanism of Electron Transfer Reaction from Cytochrome C to Cytochrome C Oxidase

The respiratory chain in mitochondria is quite essential for the energy generation in cells, effectively producing “the energy currency in living organisms”, ATP. The driving force for this system is a series of electron transfers form Complex I (NADH:quinone oxidoreductase) to Complex IV (Cytochrome c Oxidase; CcO) in inner mitochondria membrane, and these electron transfer reactions promote the proton pumping from the matrix to the intermembrane space in mitochondria, and, by use of the resulting proton concentration gradient across the membrane, Complex V (ATP synthase) produces ATP. These series of electron transfer reactions terminate at CcO to reduce molecular oxygen to water molecules. The electrons required for this four-electron reduction of molecular oxygen in CcO are donated from a small soluble electron transfer hemoprotein, Cytochrome c (Cyt c), and this electron transfer is also associated with the proton pumping for the ATP generation in the respiratory chain. To examine the molecular regulation mechanism of the electron transfer reaction to terminate the electron transport chain for four-electron reduction of molecular oxygen and proton pumping for the ATP generation, we kinetically followed the electron transfer reaction and analyzed the electron transfer reaction by the Michaelis-Menten equation. By utilizing the Cyt c mutants, we identified the amino acid residues to regulate the electron transfer reactions (Biochem. J., 2020, 477,1565). The kinetic analysis of the electron transfer reaction also revealed that the apparent rate for the electron transfer reaction determined by the steady-state kinetics is much slower than the intramolecular electron transfer rate in the Cyt c – CcO complex. On the other hand, we successfully determined the interaction site between Cyt c and CcO by using NMR (Proc. Natl. Acad. Sci., 2011, 108, 12271) and protein-protein docking simulation (J. Biol. Chem., 2016, 291, 15320). The Cyt c – CcO complex structure estimated from the NMR and protein-protein docking simulation clearly showed that the two redox centers, heme iron in Cyt c and CuA in subunit II of CcO, were located more than 20 Å apart, and the complexes exhibiting shorter redox center distances were energetically unstable. Combined with the results from kinetic and structural studies, we proposed a “conformationally gated electron transfer mechanism”, where the thermal fluctuation of the protein structure controls the electron transfer rate. However, direct experimental evidence that protein conformational fluctuations regulate electron transfer reactions has not been obtained. In this study, we focused on the viscosity of the protein solution as a factor to regulate the conformational fluctuation of the proteins, based on the assumption that high viscosity of the solution suppresses the conformational fluctuation. The electron transfer reaction from Cyt c to CcO was examined in the high viscosity solution and NMR relaxation measurements under high viscosity were also performed to identify the local structural fluctuation responsible for the regulation of the electron transfer rate. Together with the transient complex structures between Cyt c and CcO estimated by the MD simulation, the regulation mechanism of the electron transfer from Cyt c to CcO based on the “conformational gating” will be discussed.

Effects of hydrogen bonding on intramolecular/intermolecular proton-coupled electron transfer using a Ruthenium-anthraquinone dyad in ultrafast time domain

A ruthenium-anthraquinone dyad consisting of the bi-imidazole spacer in which one imidazole proton acts as a hydrogen bonding agent is employed to investigate the effects of H-bonding on both photo-induced electron transfer (PET) and proton-coupled electron transfer process (PCET). The H-bonding of the anthraquinone radical anion (AQ•-) with a bi-imidazole spacer in complex 1 generated by the electron transfer reduction of complex 1 is indicated by the symbolic anodic shift of the reduction potential of anthraquinone. The present investigation has established that the arrangement of an intramolecular H-bond between the attached AQ and the imidazole proton consequences in a notable increase in the rate of intramolecular electron transfer from Ru(II) to AQ. Further, we have also demonstrated the ultrafast electron transfer and PCET dynamics in presence of water. We have successfully detected the transient absorption photoproduct Ru(III) by which we could determine the time constants of each step which is rare in literature. Most importantly, our study demonstrates electron transfer and intra-molecular PCET dynamics in the femtosecond time domain. The results of the steady-state and transient absorption spectroscopic studies suggest that bi-imidazole spacer and water molecules have a significant role in both PET and PCET dynamics as a proton source in the excited state. We have demonstrated PCET reaction in ultrafast time scale using Ru-polypyridyl complex, with significant kinetic isotope effect.

Dynamics of Photoinduced Intramolecular and Intermolecular Electron Transfers in Ligand-Conjugated Ir(III)–Re(I) Photocatalysts

We report the electron transfer (ET) dynamics in a series of Ir(III)-Re(I) photocatalysts where two bipyridyl ligands of Ir and Re moieties are conjugated at the meta (m)- or para (p)-position of each side. Femtosecond transient absorption (TA) measurements identify the intramolecular ET (IET) dynamics from the Ir to Re moiety, followed by the formation of one-electron-reduced species (OERS) via the intermolecular ET with a sacrificial electron donor (SED). The IET rate depends on the bridging ligand (BL) structures (∼25 ps for BLmm/mp vs ∼68 ps for BLpm/pp), while the OERS formation happens on an even slower time scale (∼1.4 ns). Connecting the Re moiety at the meta-position of the bipyridyl of the Ir moiety can restrict the rotation around a covalent bond between two bipyridyl ligands by steric hindrances and facilitate the IET process. This highlights the importance of BL structures on the ET dynamics in photocatalysts.

Advances of bioelectrocatalysis by oxidoreductases

<p indent=0mm>Bioelectrocatalysis attracts much attention with the advantages of high selectivity, high efficiency, no byproduct and environmental friendliness. Electrification of industrial biotechnology is challenging for the different operating conditions and catalysts of electrochemical and biochemical reactions. In this review, we present the state-of-the-art information on enzymatic electrosynthesis for the production of fine chemicals. Multidisciplinary strategies of electrode surface modification and enzyme immobilization have been integrated in electrocatalytic devices with various applications in biosensors and bioelectrocatalysis. However, the efficiency of bioelectrosynthesis is determined by the intramolecular electron transfer rate, and interfacial electron transfer rate between the oxidoreductases and electrode. This review aims to summarize recent progresses on the mechanism studies of intramolecular electron transferof redox proteins, including tunneling, hopping, proton-coupled electron transfer, etc. Modular origin of electron transfer chain was also discussed from the perspective of the evolution of spatial adjacency network. Novel and efficient oxidoreductases with enhanced intramolecular and interfacial electron transfer rate can be obtained by protein engineering. The strategies for facilitating intramolecular electron transfer are addressed, which includes the regulation of co-evolved electron transfer network, the designs of molecular switch and the assembly of conductive modules. Oxidoreductases are engineered to improve their biocatalytic performance by using the tools of molecular evolution, modeling, structure prediction, and mutation. Co-evolved molecular switches controll proton-coupled electron transfer and regulate electron transfer inside the multi-center redox proteins. Assembly of surface-binding conductive peptides to oxidoreductases facilitates electricity-driven catalysis. Moreover, the modifications of oxidoreductases allow their predictable immobilization on functionalized electrode surface with improved stability, controlled orientation, surface coverage and enhanced electron transfer. After that, electron transfer within a series of well-defined peptides with orientation-controlled and surface-confined enzymes was addressed. Strategies also developed to increase the biocompatible active surface of electrodes and to promote charge transfer reactions. Nano- and macroporous electrodes based on metal nanoparticles, nanocarbon tubes, graphene, and metallic inverse opals have been designed and fabricated with predictable surface functionalities and electrochemical properties. Electrode/mediator/cofactor/enzyme conjugates can enhance the <italic>in vitro</italic> bioelectricity generation of cofactor. Screening of redox mediators for electrochemical regeneration of NADH was also summarized. Multifunctional surfaces of nano or meso-porous electrodes, where oxidoreductases were bounded to structured electrodes with necessary components (e.g., mediators, cofactor, etc.) with tailored properties, were summarized. Optimizations of functional electrode materials and surfaces can improve the efficiency of cofactor regeneration in the electrochemical reactor modules. Key challenges and future research for better bioelectrocatalysis are discussed and expected briefly. Mining and engineering of novel and robust enzymes from genomic and metagenomic libraries would benefit the bioelectrocatalysis. Based on genome mining, discovery of novel oxidoreductases from extreme microorganism provide thermophilic, alkalophilic, halophilic and organic solvent tolerant oxidoreductases. Reactors for bioelectrocatalysis are optimized to provide a platform for the production of chiral chemicals, which brings great promises for biomanufacturing. Further study of bio-inspired multi-enzyme immobilization which mimics quick electron transfer in multi-enzyme complex is suggested. A variety of approaches for bioelectrocatalysis have been successfully applied for the synthesis of chiral chemicals which are intermediates of fine chemicals and pharmaceuticals. Bioelectrosynthesis processes could replace many chemically catalyzed routes in the future, and aims to construct a new platform for more efficient and green biomanufacturing.

Strategic design and improvement of the internal electron transfer of heme b domain-fused glucose dehydrogenase for use in direct electron transfer-type glucose sensors

A fusion enzyme composed of an Aspergillus flavus-derived flavin adenine dinucleotide glucose dehydrogenase (AfGDH) and an electron transfer domain of Phanerochaete chrysosporium-derived cellobiose dehydrogenase (Pcyb) was previously reported to show the direct electron transfer (DET) ability to an electrode. However, its slow intramolecular electron transfer (IET) rate from the FAD to the heme, limited the sensor signals. In this study, fusion FADGDH (Pcyb-AfGDH) enzymes were strategically redesigned by performing docking simulation, following surface-electrostatic potential estimation in the predicted area. Based on these predictions, we selected the amino acid substitution on Glu324, or on Asn408 to Lys to increase the positive charge at the rim of the interdomain region. Pcyb-AfGDH mutants were recombinantly produced using Pichia pastoris as the host microorganism, and their IET was evaluated. Spectroscopic observations showed that the Glu324Lys (E324K) and Asn408Lys (N408K) Pcyb-AfGDH mutants showed approximately 1.70- and 9.0-fold faster IET than that of wildtype Pcyb-AfGDH, respectively. Electrochemical evaluation revealed that the mutant Pcyb-AfGDH-immobilized electrodes showed higher DET current values than that of the wildtype Pcyb-AfGDH-immobilized electrodes at pH 6.5, which was approximately 9-fold higher in the E324K mutant and 15-fold higher in the N408K mutant, than in the wildtype. Glucose enzyme sensors employing N408K mutant was able to measure glucose concentration under physiological condition using artificial interstitial fluid at pH 7.4, whereas the one with wildtype Pcyb-AfGDH was not. These results indicated that the sensor employed the redesigned mutant Pcyb-AfGDH can be used for future continuous glucose monitoring system based on direct electron transfer principle. (247 words).

Proton-Coupled Electron Transfer for Photoinduced Generation of Two-Electron Reduced Species of Quinone.

Purpose-built molecules that follow the fundamental process of photosynthesis have significance in developing better insight into the natural photosynthesis process. Quinones have a significant role as electron acceptors in natural photosynthesis, and their reduction is assisted through H-bond donation or protonation. The major challenge in such studies is to couple the multielectron and proton-transfer process and to achieve a reasonably stable charge-separated state for the elucidation of the mechanistic pathway. We have tried to address this issue through the design of a donor-acceptor-donor molecular triad (2RuAQ) derived from two equivalent [Ru(bpy)3]2+ derivatives and a bridging anthraquinone moiety (AQ). Photoinduced proton-coupled electron transfer (PCET) for this molecular triad was systematically investigated in the absence and presence of hexafluoroisopropanol and p-toluenesulfonic acid (PTSA) using time-resolved absorption spectroscopy in the ultrafast time domain. Results reveal the generation of a relatively long-lived charge-separated state in this multi-electron transfer reaction, and we could confirm the generation of AQ2- and RuIII as the transient intermediates. We could rationalize the mechanistic pathway and the dynamics associated with photoinduced processes and the role of H-bonding in stabilizing charge-separated states. Transient absorption spectroscopic studies reveal that the rates of intramolecular electron transfer and the mechanistic pathways associated with the PCET process are significantly different in different solvent compositions having different polarities. In acetonitrile, a concerted PCET mechanism prevails, whereas the stepwise PCET reaction process is observed in the presence of PTSA. The results of the present study represent a unique model for the mechanistic diversity of PCET reactions.

Observing Donor-to-Acceptor Electron-Transfer Rates and the Marcus Inverted Parabola in Molecular Junctions.

A recurring theme in molecular electronics is the relationship between the intramolecular electron transfer rate in a donor-bridge-acceptor system and the conductance at low bias in the corresponding electrode-bridge-electrode junction. The similarities between through-bridge donor-to-acceptor electron tunneling and through-bridge electrode-to-electrode Landauer transport led to the suggestion of an approximate linear relationship between the rate and the conductance for any given bridge. A large body of work indicates that the two quantities are not necessarily linearly related, showing different behaviors as a function of temperature, voltage and bridge length. Apart from Landauer tunneling, incoherent hopping can be an important mechanism in molecular junctions. We propose a donor-bridge-acceptor molecular junction, functioning in the incoherent hopping regime, that is suited for establishing direct correlations between the electrode-to-electrode current and the intramolecular donor-to-acceptor electron transfer rate. We suggest that this type of junction may be used to observe the Marcus-inverted-parabola dependence of the intramolecular rate on energy gap by varying the bias voltage. The realization of such an experiment would enable meaningful comparisons between solution-phase electron transfer rates and molecular-junction currents for the same molecule.

Kinetics and Mechanism of Intramolecular Electron Transfer in Ru(II)-Re(I) Supramolecular CO2-Reduction Photocatalysts: Effects of Bridging Ligands.

The supramolecular photocatalysts in which a Ru(II) complex as a molecular redox photosensitizer unit and a Re(I) complex as a molecular catalyst unit are connected with a various alkyl or ether chain have attracted attention because they can efficiently photocatalyze CO2 reduction with high durability and high selectivity of CO formation, especially on various solid materials such as semiconductor electrodes and mesoporous organosilica. The intramolecular electron transfer from the one-electron reduced photosensitizer unit to the catalyst unit, which follows excitation of the photosensitizer unit and subsequent reductive quenching of the excited photosensitizer unit by a reductant, is one of the most important processes in the photocatalytic reduction of CO2. We succeeded in determining the rate constants of this intramolecular electron transfer process by using subnanosecond time-resolved IR spectroscopy. The logarithm of rate constants shows a linear relationship with the lengths of the bridging chain in the supramolecular photocatalysts with one bridging alkyl or ether chain. In conformity with the exponential decay of the wave function and the coupling element in the long-distance electron transfer, the apparent decay coefficient factor (β) in the supramolecular photocatalysts with one bridging chain was determined to be 0.74 Å-1. In the supramolecular photocatalyst with two ethylene chains connecting between the photosensitizer and catalyst units, on the other hand, the intramolecular electron transfer rate is much faster than that with only one ethylene chain. These results strongly indicate that the intramolecular electron transfer from the one-electron reduced species of the Ru photosensitizer unit to the Re catalyst unit proceeds by the through-bond mechanism.

The catalytic mechanism for NO production by the mitochondrial enzyme, sulfite oxidase.

Recently, Guenter Schwarz and colleagues published an elegant study in the Biochemical Journal (2019) 476, 1805-1815 which combines kinetic and spectroscopic studies with protein engineering to provide a mechanism for sulfite oxidase (SO)-catalyzed nitrite reduction that yields nitric oxide (NO). This work is noteworthy as it demonstrates that (i) for NO generation, both sulfite and nitrite must bind to the same molybdenum (Mo) center; (ii) upon sulfite reduction, Mo is reduced from +6 (MoVI) to +4 (MoIV) and MoIV reduces nitrite to NO yielding MoV; (iii) the heme moiety, linked to the Mo-center by an 11 amino acid residue tether, gets reduced by intramolecular electron transfer (IET) resulting in MoV being oxidized to MoVI; (iv) the reduced heme transfers its electron to a second nitrite molecule converting it to NO; (v) the authors demonstrate steady-state NO production in the presence of the natural electron acceptor cytochrome c; (vi) Finally, the authors use protein engineering to shorten the heme tether to reduce the heme-Mo-center distance with the aim of increasing NO production. Consequently, the rate of IET to cytochrome c is decreased but the enzymatic turnover rate for NO production is increased by ∼10-fold. This paper is unique as it provides strong evidence for a novel mechanism for steady-state NO production for human mitochondrial SO and serves as a potential template for studying NO production mechanisms in other enzymes by integrating the information gained from enzyme kinetics with EPR and UV/vis spectroscopy and protein engineering.

Mechanism of nitrite-dependent NO synthesis by human sulfite oxidase.

In addition to nitric oxide (NO) synthases, molybdenum-dependent enzymes have been reported to reduce nitrite to produce NO. Here, we report the stoichiometric reduction in nitrite to NO by human sulfite oxidase (SO), a mitochondrial intermembrane space enzyme primarily involved in cysteine catabolism. Kinetic and spectroscopic studies provide evidence for direct nitrite coordination at the molybdenum center followed by an inner shell electron transfer mechanism. In the presence of the physiological electron acceptor cytochrome c, we were able to close the catalytic cycle of sulfite-dependent nitrite reduction thus leading to steady-state NO synthesis, a finding that strongly supports a physiological relevance of SO-dependent NO formation. By engineering SO variants with reduced intramolecular electron transfer rate, we were able to increase NO generation efficacy by one order of magnitude, providing a mechanistic tool to tune NO synthesis by SO.

O2 Reduction to Water by High Potential Multicopper Oxidases: Contributions of the T1 Copper Site Potential and the Local Environment of the Trinuclear Copper Cluster.

High potential multicopper oxidases (MCOs) have T1 reduction potentials >600 mV (vs normal hydrogen electrode), making them important catalysts for O2 reduction in various biotechnological applications. The oxygen reduction mechanism for the low potential MCOs is well-characterized; however, O2 reactivity of high potential MCOs is not well understood. In this study, we have shown that laccase from Trametes versicolor, where the T1 redox potential is increased by ∼350 mV over that of the low potential MCOs corresponding to an 8 kcal/mol decrease in the driving force, exhibits a slower intramolecular electron transfer (IET) rate to the trinuclear Cu cluster (TNC) in the native intermediate (NI), relative to the low potential MCO from Rhus vernicifera laccase. This IET rate is, however, >102 times faster than the decay rate of the NI, demonstrating that this intermediate form of the enzyme is catalytically relevant enabling fast turnover. However, in contrast to the low potential MCOs where T1 reduction by substrate is rate limiting, the rate limiting step in turnover of high potential MCOs is the first IET to NI. Part of the reduction potential difference of the T1 sites in high vs low potential MCOs is balanced by an ∼100 mV higher reduction potential of NI due to the more positive protein environment in the vicinity of the TNC.

Mixed valence radical anions of 4,4″-dinitro-p-terphenyl and its aza derivatives as models for electronic communication in conducting polymers

Cyclic voltammetry, UV/Vis/NIR spectroscopy, EPR spectroscopy and theoretical calculations were used to study the mixed valence radical anions of 4,4″-dinitro-p-therphenyl (2), of 3,6-bis(4-nitrophenyl)-1,2-diazine (3) and of 2,5-bis(4-nitrophenyl)-1,4-diazine (4) as models to understand the effect of the structural changes on the conductivity of poly-p-phenylene polymers. All the results show an increase of the electronic communication between nitro groups in the order 2 < 3 < 4. Substitution of CH units by nitrogen atoms in the central aromatic ring lowers the reduction potential of the bridge, increasing the electronic coupling through the triaryl bridge and the rate of intramolecular electron transfer in the same order. Additionally, calculations show that the 1,2-diazine ring of 3, and specially the 1,4-diazine ring of 4, allow a higher planarity of the molecule by decreasing the steric strain between rings, which also increases the conjugation through the bridge. The results suggest that incorporating pyrazine (1,4-diazine) and pyridazine (1,2-diazine) units in poly-p-phenylene polymers should enhance the electronic properties of these conducting polymers.

Direct Measurement of Intramolecular Electron Transfer in a Series of Artificial Photosynthesis Processes

We have directly determined the intramolecular electron transfer rate and revealed its mechanism in supramolecular complexes during CO2 photoreduction by time-resolved infrared spectroscopic measurements over a wide temporal range.

Temperature Dependence of the Rate of Intramolecular Electron Transfer.

Quantum mechanical/molecular mechanical simulations are used to explore the temperature dependence of intramolecular electron-transfer rates in systems that represent boththe "normal" and the "inverted" regions of the Marcus curve. The treatment uses an approach that includes effects of vibrational relaxations and dephasing and is largely free of adjustable parameters. Effects of temperature on the distribution of the energy gap between the reactant and product ( P( xo)), the electronic-interaction matrix element, and the rates of dephasing and vibrational relaxations are considered. The simulations reproduce the measured rate constant andtemperature dependence well for photochemical charge separation in a porphyrin-benzoquinone cyclophane and for a ground-state charge-shift reaction in a biphenylyl-androstane-naphthylyl radical. They overestimate the rate of the charge-shift reaction in a biphenylyl-androstane-benzoquinone adduct but are in accordance with the observation that this reaction is almost independent of temperature. Arrhenius plots of rate constants calculated with various P( xo) distributions show that the apparent activation enthalpy depends on whether or not P( xo) shifts with temperature.

Tethered sensitizer-catalyst noble-metal-free molecular devices for solar-driven hydrogen generation.

Inspired by natural photosynthesis in an organized assembly, compact H2-evolving molecular devices, which tether sensitizer and catalyst modules in one single molecule, present an opportunity to overcome the diffusion limit required for multi-component molecular systems, and increase intramolecular electron transfer rates from the photoactivated unit to the catalytic center to improve H2-evolving efficiency. Thereinto absolutely noble-metal free H2-evolving molecular devices are of particular interest because they don't contain precious and scarce noble-metal based components. This Frontier article focuses specifically on the recent advances in the design, synthesis, and photocatalytic properties of all-abundant-element molecular devices for photoinduced H2 generation via intramolecular processes. Some challenges and suggestions for future directions in this field are also illustrated.

Effects of Free Energy and Solvent on Rates of Intramolecular Electron Transfer in Organic Radical Anions.

Rates of intramolecular electron transfer from a 1,1'-biphenylyl radical anion to six different acceptors on an androstane scaffold are examined with the aid of a theory that was developed recently to include effects of vibrational relaxations and dephasing. The electronic-interaction matrix element and other parameters needed for the theory are obtained by quantum-mechanical/molecular-mechanical simulations of the reactions in five solvents ranging from iso-octane to methyltetrahydrofuran. Intramolecular vibrational modes that are coupled to electron transfer are resolved in simulations in iso-octane and cyclohexane. The energies and coupling factors for these modes allow extension of the theory to incorporate transitions to and from excited vibrational levels. The calculated rates of electron transfer agree well with experimental measurements from the literature, except for reactions in which excited electronic states of the products become important.

Design of Ruthenium Biimidazole-Anthraquinone Dyads to Demonstrate Photoinduced Electron Transfer: Combined Experimental and DFT/TD-DFT Investigations

A Biimidazole-anthraquinone ligand has been utilized in this paper to synthesize a new family of Ru(II) complexes capable of demonstrating intramolecular electron transfer from excited *[Ru(ppy)]2+ fragment to the 9,10-anthraquinone moiety upon excitation at their MLCT bands. The electronic properties of the dyads were fine-tuned by varying the coligand in the complexes. All the complexes were thoroughly characterized by standard analytical tools and spectroscopic techniques. X-ray crystal structure of a representative complex (2) was also been determined and found to crystallize in the monoclinic space group P-1. An attempt was made to assess detailed energetics and the rates of photoinduced intramolecular electron transfer in the complexes. Finally, computation works employing density functional theory (DFT) and time-dependent density functional theory (TD-DFT) were also carried out to investigate the electronic structures of the complexes as well as proper assignment of experimentally observed photo-redox behaviors.

Heteroleptic Cu(I) complexes integrating functionalized chromophores for dye-sensitized solar cells: An in-depth analysis of electronic structure, spectrum, excitation, and intramolecular electron transfer

A series of heteroleptic Cu(I) complexes integrating dicarboxylic acid dimethyl bipyridine/phenanthroline with functionalized chromophores have been investigated by density functional theory (DFT) and time-dependent DFT (TD-DFT). The molecular geometry, electronic structure, electronic excitation and absorption spectrum, light-harvesting efficiency (LHE), and intramolecular electron transfer (IET) are analyzed in dichloromethane solution. The four-coordinated heteroleptic Cu(I) complexes exhibit distorted trigonal-pyramidal geometries. Introducing the functionalized chromophores does not only disperse the electron distribution of HOMOs over the Cu(I) center and π-conjugated donors, but also downshift the HOMO levels and reduce the HOMO-LUMO gaps, and thus improve the light-harvesting efficiency significantly. The electronic excitations of all Cu(I) complexes at 300.0–375.0 and 475.0–575.0 nm are more favorable for the direct electron injection into semiconductor than those at 400.0–450.0 nm. The structural optimizations along the transverse direction of the Cu(I) complexes result in more transferred electrons, longer electron transfer distances, smaller IET rates, and less orbital overlaps than those along the longitudinal direction. Our results elucidate the detailed photon-to-electron conversion mechanisms of heteroleptic Cu(I) complexes, and provide a fresh insight into the design and screening of novel sensitizers for DSSCs.

Electron Dynamics and IR Peak Coalescence in Bridged Mixed Valence Dimers Studied by Ultrafast 2D-IR Spectroscopy.

Dynamic IR peak coalescence and simulations based on the optical Bloch equations have been used previously to predict the rates of intramolecular electron transfer in a group of bridged mixed valence dimers of the type [Ru3(O)(OAc)6(CO)L]-BL-[Ru3(O) (OAc)6(CO)L]. However, limitations of the Bloch equations for the analysis of dynamical coalescence in vibrational spectra have been described. We have used ultrafast 2D-IR spectroscopy to investigate the vibrational dynamics of the CO spectator ligands of several dimers in the group. These experiments reveal that no electron site exchange occurs on the time scale required to explain the observed peak coalescence. The high variability in FTIR peak shapes for these mixed valence systems is suggested to be the result of fluctuations in the charge distributions at each metal cluster within a single-well potential energy surface, rather than the previous model of two-site exchange.

Theoretical insight into photo-induced intramolecular electron transfer in heterodinuclear Ru(II)–Co(III) complexes

Photo-induced intramolecular electron transfer (IET) of a series of heterodinuclear Ru(II)–Co(III) complexes has been theoretically investigated by density functional theory (DFT) and time-dependent DFT (TD-DFT). The Ru(II)–Co(III) complexes display Ru → Co metal-to-metal electron transfer (MMET) in the visible region. The photosensitivity involving spectral response range and absorption intensity, and IET rate, are improved by introducing (Z)-N-(1H-isoindol-1-ylidene)-2H-isoindol-1-amine as donor ligands. The Ru → Co IET rate in the newly designed complexes shows at least one order of magnitude larger than that in [(bpy)2-Ru(pytp)Co(tren)]5+. These superior performances indicate that heterodinuclear Ru(II)–Co(III) complexes could be promising as the effective ligand release carriers for the selective cancer treatment.