Biodegradation Rate Research Articles

In vivo biodegradation rates of domestic membranes for guided tissue regeneration

Background: Experimental research is required to provide guidelines for the use of domestic biodegradable membranes. Aim: To assess the swelling index and biodegradation rate of barrier membranes (non-collagen and collagen) for guided tissue regeneration in vitro, as well as their biocompatibility in vivo. Materials and Methods: The swelling index of two types of membranes was assessed after 24 h of exposure to phosphate-buffered saline (PBS) at different pH levels (6.50 and 7.37). The spontaneous degradation rate of the two types of membranes was assessed; changes in their weight following exposure to PBS at different pH levels (6.50 and 7.37) were measured at predetermined time points. Moreover, the biocompatibility of two membrane samples following subcutaneous implantation in B/D male mice was assessed. Results: The swelling index of non-collagen membranes was higher at neutral pH compared to acidic pH: 7.7 for pH 7.37 vs 7.2 for pH 6.50. For collagen membranes, the swelling index was pH-independent. There were no differences in membrane weight loss following exposure to PBS at pH 6.5 during 8 weeks. During the first two weeks, collagen membranes had a higher resorption rate at pH 7.37 than non-collagen membranes. Following subcutaneous implantation of both membranes, histopathological specimens collected two weeks after surgery revealed the formation of foreign body granulomas with well-defined boundaries around the implants. Macrophages, monocytes, single giant cells of foreign bodies, and Pirogov–Langhans giant cells were detected, with the number gradually increasing over time. Conclusion: Non-collagen membranes had a larger swelling index than collagen membranes, which depended on pH. At pH 7.37, collagen membranes had a higher resorption rate during the first two weeks compared to non-collagen membranes. In vitro weight loss after 8 weeks was 20–30% for both membranes, regardless of pH. Subcutaneous implantation in mice confirmed the biocompatibility of the membranes. The biodegradation rate of non-collagen membranes was higher than that of collagen membranes.

Biocomposites Based on Polyethylene/Ethylene–Vinyl Acetate Copolymer/Cellulosic Fillers

This work studied biocomposites based on a blend of low-density polyethylene (LDPE) and the ethylene–vinyl acetate copolymer (EVA), filled with 30 wt.% of cellulosic components (microcrystalline cellulose or wood flour). The LDPE/EVA ratio varied from 0 to 100%. It was shown that the addition of EVA to LDPE increased the elasticity of biocomposites. The elongation at break for filled biocomposites increased from 9% to 317% for microcrystalline cellulose and from 9% to 120% for wood flour (with an increase in the EVA content in the matrix from 0 to 50%). The biodegradability of biocomposites was assessed both in laboratory conditions and in open landfill conditions. The EVA content in the matrix also affects the rate of the biodegradation of biocomposites, with an increase in the proportion of the copolymer in the polymer matrix corresponding to increased rates of biodegradation. Biodegradation was confirmed gravimetrically by weight loss, an X-ray diffraction analysis, and the change in color of the samples after exposition in soil media. The prepared biocomposites have a high potential for implementation due to the optimal combination of consumer properties.

A nanofibrous polycaprolactone/collagen neural guidance channel filled with sciatic allogeneic schwann cells and platelet-rich plasma for sciatic nerve repair.

Sciatic nerve damage, a common condition affecting approximately 2.8% of the US population, can lead to significant disability due to impaired nerve signal transmission, resulting in loss of sensation and motor function in the lower extremities. In this study, a neural guidance channel was developed by rolling a nanofibrous scaffold produced via electrospinning. The scaffold's microstructure, biocompatibility, biodegradation rate, porosity, mechanical properties, and hemocompatibility were evaluated. Platelet-rich plasma (PRP) activated with 30,000 allogeneic Schwann cells (SCs) was injected into the lumen of the channels following implantation into a rat model of sciatic nerve injury. Recovery of motor function, sensory function, and muscle re-innervation was assessed using the sciatic function index (SFI), hot plate latency time, and gastrocnemius muscle wet weight loss. Results showed mean hot plate latency times of Autograft: 7.03, PCL/collagen scaffolds loaded with PRP and SCs (PCLCOLPRPSCs): 8.34, polymer-only scaffolds (PCLCOL): 10.66, and untreated animals (Negative Control): 12.00. The mean SFI values at week eight were Autograft: -49.30, PCLCOLPRPSCs: -64.29, PCLCOL: -75.62, and Negative Control: -77.14. The PCLCOLPRPSCs group showed a more negative SFI compared to the Autograft group but performed better than both the PCLCOL and Negative Control groups. These findings suggest that the developed strategy enhanced sensory and functional recovery compared to the negative control and polymer-only scaffold groups.

Jade powder/PLGA composite microspheres for improved performance as potential bone repair drug carrier

Poly (lactic-co-glycolic acid) (PLGA) has been widely used as drug delivery carrier or scaffold for bone repair due to its good biocompatibility, biodegradability, and degradation rate controllability. However, defects, like acidic degradation by-products, are associated with PLGA and restrict its practical applications. Jade powder, leftover from jade polishing process, is a natural material rich in elements of Ca, Si, and Mg while biocompatible and antibacterial. Herein, jade powder/PLGA composite microspheres with different mass ratios were prepared by emulsion solvent evaporation method under the optimized conditions. Characterization from SEM, EDS, FTIR, and surface water contact angle measurements indicated jade powder was successfully combined with PLGA and improved the surface wettability of the microspheres. Moreover, it was proved, through in vitro simulated body fluid test as well as adipose stem cell osteogenesis analysis, that jade powder addition enhanced the pH buffering capacity of the composite microsphere for simulated body fluid, and promoted the in vitro osteogenic activity of adipose stem cells at a certain amount. This study provides new ideas to employ jade powder, a natural material otherwise thrown away as solid waste, for improvement on PLGA performance in bone repair or potentially other biomedical fields.

Wastewater biotreatment and bioaugmentation for remediation of contaminated sites at an oil recycling plant

ABSTRACT This work focused on the biotreatment of wastewater and contaminated soil in a used oil recycling plant located in Bizerte. A continuous stirred tank reactor (CSTR) and a trickling filter (TF) were used to treat stripped and collected wastewater, respectively. The CSTR was started up and stabilized for 90 days. Over the following 170 days, the operational organic loading rates of the TF and the CSTR were around 1,200 and 3,000 mg chemical oxygen demand (COD) L−1 day−1, respectively. The treatment efficiency was 94% for total petroleum hydrocarbons, 89.5% for COD, 83.34% for biological oxygen demand (BOD5), and 91.25% for phenol. Treated industrial wastewater from the TF was used for bioaugmentation (BA) of contaminated soil. The assessment of the soil took 24 weeks to complete. The effectiveness of the soil BA strategy was confirmed by monitoring phenolic compounds, aliphatic and polycyclic aromatic hydrocarbons, heavy metals, and germination index. The biodegradation rate of contaminants was improved and the time required for their removal was reduced. The soil bacterial communities were dominated by species of the genera Mycobacterium, Proteiniphilum, Nocardioides, Luteimicrobium, and Azospirillum, which were identified as hydrocarbon and phenol-degrading bacteria.

Enhanced Biodegradation of Silk Fibroin Hydrogel for Preventing Postoperative Adhesion.

An absorbable adhesion barrier is a medical device that prevents postoperative adhesion and matches its biodegradation time with the regeneration period of its target tissues, which is important for antiadhesion effects. Physical hydrogels of Bombyx mori silk fibroin (SF) proteins are degradable in vivo. However, their biodegradation time is too long to exert antiadhesion effects. To shorten the biodegradation time of the SF hydrogels, we decreased the molecular weight (MW) of the SF proteins by alkaline treatment and prepared low-MW (LMW) SF hydrogels. The hydrogels contained less β-sheet crystalline and more amorphous structures than conventional, high-MW (HMW) SF hydrogels. Because of the potential loosened SF molecular structures in the hydrogel networks, the LMW SF hydrogels showed enhanced biodegradation (i.e., shorter in vitro enzymatic biodegradation time and faster in vivo biodegradation rate) as well as a lower affinity for plasma proteins and fibroblasts, which are involved in postoperative adhesion formation. An antiadhesion test using a rat abdominal adhesion model demonstrated that the LMW SF hydrogel applied to the abraded cecum was almost completely degraded within two weeks postimplantation, with a significantly lower adhesion severity score than that in the untreated model rat group. Conversely, the HMW SF hydrogel remained between the cecum and abdominal wall, with the same adhesion severity as that of the untreated model rat group. Therefore, we concluded that the antiadhesion effects of SF hydrogels were induced by enhanced biodegradation. The results of this study indicate the potential of LMW SF hydrogels as absorbable adhesion barriers.

Variability of Biodegradation Rates of Commercial Chemicals in Rivers in Different Regions of Europe.

Biodegradation is one of the most important processes influencing the fate of organic contaminants in the environment. Quantitative understanding of the spatial variability in environmental biodegradation is still largely uncharted territory. Here, we conducted modified OECD 309 tests to determine first-order biodegradation rate constants for 97 compounds in 18 freshwater river segments in five European countries: Sweden, Germany, Switzerland, Spain, and Greece. All but two of the compounds showed significant spatial variability in rate constants across European rivers (ANOVA, P < 0.05). The median standard deviation of the biodegradation rate constant between rivers was a factor of 3. The spatial variability was similar between pristine and contaminated river segments. The longitude, total organic carbon, and clay content of sediment were the three most significant explanatory variables for the spatial variability (redundancy analysis, P < 0.05). Similarities in the spatial pattern of biodegradation rates were observed for some groups of compounds sharing a given functional group. The pronounced spatial variability presents challenges for the use of biodegradation simulation tests to assess chemical persistence. To reflect the variability in the biodegradation rate, the modified OECD 309 test would have to be repeated with water and sediment from multiple sites.

Role of Ti3AlC2 MAX phase in regulating biodegradation and improving electrical properties of calcium silicate ceramic for bone repair applications

Calcium silicate ceramic is a promising bioceramic for various biomedical applications, but its high biodegradation rate and low strength restrict its clinical utility. As a result, the study devised an innovative solution to address these issues by utilizing the titanium aluminum carbide phase, potentially for the first time in biological applications, in conjugation with hydroxyapatite. Then, using powder metallurgy technology, they added these phases to calcium silicate to create nanocomposites. After soaking in simulated body fluid for ten days, the produced nanocomposites were assessed for bioactivity and biodegradability using scanning electron microscopy, inductively coupled plasma-atomic emission spectroscopy, and weight loss assays. Their electrical and dielectric properties were also measured before and after soaking in the simulated body fluid solution. Furthermore, the tribo-mechanical properties of all sintered samples were measured. Interestingly, adding 40% hydroxyapatite nanoparticles to calcium silicate reduced the porosity from 12 to 6%. However, adding five vol% of the titanium aluminum carbide phase to the same sample increased the porosity to 8%. Importantly, these recorded percentages of porosity were comparable to those of compact bone porosity, which range from 5 to 13%. The addition of hydroxyapatite and titanium aluminum carbide phase significantly improved the rapid biodegradation of calcium silicate, albeit with a slight decrease in its bioactive properties, as evidenced by the incomplete surface coverage of the samples with the hydroxyapatite layer in the scanning electron microscopy images. The electrical properties of the nanocomposites were better with the addition of hydroxyapatite and titanium aluminum carbide phase, which helped the bone heal faster. The addition of a titanium aluminum carbide phase significantly improved the mechanical properties of the resulting nanocomposites. For example, the calculated values for compressive strength of all examined samples were 131, 115, 105, 147, and 135 MPa. Based on the results, the prepared samples can be used in orthopaedic and dental applications.

Poly (Butylene Adipate‐Co‐Terephthalate) (PBAT) – Based Biocomposites: A Comprehensive Review

AbstractWith the issue of plastic waste persisting and the need for more sustainable solutions to the ever‐increasing demand for lightweight and durable plastic products, this review has become imminent and compelling. Poly (butylene adipate‐co‐terephthalate) (PBAT) is a biodegradable polymer with exceptional film‐forming ability resembling those of low‐density polyethylene. PBAT has a huge advantage for packaging applications due to its remarkably high elongation at break, giving it a good processing window for its application in packaging. However, certain defiant intrinsic properties stand in the way of its full commercialization. The development of blends and biocomposites of PBAT has, therefore, become imperative for complementing its properties and producing a superior material. This paper focuses on the recent developments in preparing PBAT‐based blends and biocomposites with superior mechanical, barrier, and antimicrobial properties and, most importantly, has also investigated how the development of these blends and biocomposites impacts the biodegradation rate of PBAT. It also highlights the possible synthesis of bio‐based PBAT and the commercialization, market trends, and prospects of PBAT‐based materials for flexible, rigid packaging, and other industrial applications compared with biodegradable alternatives.

Review on Biodegradable Aliphatic Polyesters: Development and Challenges.

Biodegradable polymers are gaining attention as alternatives to non-biodegradable plastics to address environmental issues. With the rising global demand for plastic products, the development of non-toxic, biodegradable plastics is a significant topic of research. Aliphatic polyester, the most common biodegradable polyester, is notable for its semi-crystalline structure and can be synthesized from fossil fuels, microbial fermentation, and plants. Due to great properties like being lightweight, biodegradable, biocompatible, and non-toxic, aliphatic polyesters are used in packaging, medical, agricultural, wearable devices, sensors, and textile applications. The biodegradation rate, crucial for biodegradable polymers, is discussed in this review as it is influenced by their structural properties and environmental conditions. This review discusses currently available biodegradable polyesters, their emerging applications, and the challenges in their commercialization. As research in this area grows, this review emphasizes the innovation in biodegradable aliphatic polyesters and their role in advancing environmental sustainability.

A Facile Strategy for Preparing Flexible and Porous Hydrogel-Based Scaffolds from Silk Sericin/Wool Keratin by In Situ Bubble-Forming for Muscle Tissue Engineering Applications.

In the present study, it is aimed to fabricate a novel silk sericin (SS)/wool keratin (WK) hydrogel-based scaffolds using an in situ bubble-forming strategy containing an N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) coupling reaction. During the rapid gelation process, CO2 bubbles are released by activating the carboxyl groups in sericin with EDC and NHS, entrapped within the gel, creating a porous cross-linked structure. With this approach, five different hydrogels (S2K1, S4K2, S2K4, S6K3, and S3K6) are constructed to investigate the impact of varying sericin and keratin ratios. Analyses reveal that more sericin in the proteinaceous mixture reinforced the hydrogel network. Additionally, the hydrogels' pore size distribution, swelling ratio, wettability, and in vitro biodegradation rate, which are crucial for the applications of biomaterials, are evaluated. Moreover, biocompatibility and proangiogenic properties are analyzed using an in-ovo chorioallantoic membrane assay. The findings suggest that the S4K2 hydrogel exhibited the most promising characteristics, featuring an adequately flexible and highly porous structure. The results obtained by in vitro assessments demonstrate the potential of S4K2 hydrogel in muscle tissue engineering. However, further work is necessary to improve hydrogels with an aligned structure to meet the features that can fully replace muscle tissue for volumetric muscle loss regeneration.

Production of bioplastic films from wild cocoyam (Caladium bicolor) starch

This study tackles the pressing environmental challenges resulting from the rapid and ongoing use of conventional plastics by investigating biodegradable alternatives derived from wild cocoyam starch. The bioplastics developed from various formulations, incorporating gelatin, glycerine, vegetable oil, and vinegar, were systematically evaluated for their mechanical, chemical, microstructural and biodegradability properties. The addition of glycerine and gelatin enhanced the moisture content and flexibility of the films while vegetable oil improved water resistance, reducing water absorption. Th sample that contains 3 g of gelatin and 3 ml of glycerine exhibited the best overall performance with a tensile strength of 6.5 MPa and an elongation at break of 77 %. This sample also achieved an impressive biodegradation rate of 70 % within 7 days. Scanning Electron Microscopy revealed a uniform and smooth morphology, while Fourier Transform Infrared Spectroscopy confirmed the presence of key functional groups responsible for the material's performance. These results establish wild cocoyam starch as a promising resource for producing biodegradable bioplastics with considerable potential in various industries, particularly in packaging and agricultural applications. The excellent mechanical properties and biodegradability of the materials along with its natural abundance, offer an eco-friendly solution to the plastic waste problem. The study also opens new avenues for optimizing bioplastic formulations to enhance specific properties like thermal stability and moisture resistance, further broadening their practical applications. This research contributes to the sustainable materials landscape and represents a step toward reducing reliance on fossil-based plastics, advancing the global effort to mitigate environmental pollution.

Synergetic effect of bioglass and nano montmorillonite on 3D printed nanocomposite of polycaprolactone/gelatin in the fabrication of bone scaffolds

Nowadays, bone injuries and disorders have increased all over the world and can reduce the quality of human life. Bone tissue engineering repair approaches require new biomaterials and methods to construct scaffolds with the required structural properties as well as improved performance. As potential therapeutic strategies in bone tissue engineering, 3D printed scaffolds have been developed. Polycaprolactone/Ceramic composites have attracted considerable attention due to their cytocompatibility, biodegradability, and physical properties. In this study, a 3D printing process was used to create polycaprolactone (PCL)-Gelatin (GEL) scaffolds containing varying concentrations of Bioglass (BG) and Nano Montmorillonite (MMT). This mixture was then loaded into a 3D printer, and the scaffolds were printed layer by layer. After constructing the scaffolds, they were then examined for their physical, chemical, and biological characteristics. Surface appearance was analyzed with a scanning electron microscope (SEM), which revealed that NC increased the diameter of pores from 465 to 480 μm. The elements in the scaffolds were evaluated by EDX analysis, and a uniform dispersion of nano montmorillonite particles was observed. The compressive strength reached 76.43 MPa for PCL/G/35 %MMT/15 %BG scaffold. Also, the rate of water absorption, biodegradability and bioactivity of PCL-GEL scaffolds increased significantly in the presence of NC. According to the MTT cell test results, adding BG and NC increased cell proliferation, adhesion and cell viability to 127.7 %. These findings indicated that the 3D printed PCL/G/35 %MMT/15 %BG scaffold has promising strategies for bone repair applications. Also, polynomial curve fitting shows that scaffold degradability after soaking in PBS can be predicted using the initial weight and soaking time. Adding more variables and data could improve prediction accuracy, reducing the need for experiments and conserving resources.

Assessment of homogeneous electro-Fenton process coupled with microbial fuel cell utilizing Serratia sp. AC-11 for glyphosate degradation in aqueous phase

Glyphosate (GLY), a globally-used organophosphate herbicide, is frequently detected in various environmental matrices, including water, prompting significant attention due to its persistence and potential ecological impacts. In light of this environmental concern, innovative remediation strategies are warranted. This study utilized Serratia sp. AC-11 isolated from a tropical peatland as a biocatalyst in a microbial fuel cell (MFC) coupled with a homogeneous electron-Fenton (EF) process to degrade glyphosate in aqueous medium. After coupling the processes with a resistance of 100 Ω, an output voltage value of 0.64 V was obtained and maintained stable throughout the experiment. A bacterial biofilm of Serratia sp. AC-11 was formed on the carbon felt electrode, confirmed by attenuated total reflectance-Fourier transformed infrared (ATR-FTIR) and scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS). In the anodic chamber, the GLY biodegradation rate was 100% after 48 h of experimentation, with aminomethylphosphonic acid (AMPA) remaining in the solution. In the cathodic chamber, the GLY degradation rate for the EF process was 69.5% after 48 h experimentation, with almost all of the AMPA degraded by the in situ generated hydroxyl radicals. In conclusion, the results demonstrated that Serratia sp. AC-11 not only catalyzed the biodegradation of glyphosate but also facilitated the generation of electrons for subsequent transfer to initiate the EF reaction to degrade glyphosate. This dual functionality emphasizes the unique capabilities of Serratia sp. AC-11, it as an electrogenic microorganism with application in innovative bioelectrochemical processes, and highlighting its role in sustainable strategies for environmental remediation.

Influence of Environmental Conditions on Bacterial Remediation of Oil-Contaminated Soil: A Case Study at Baiji Refinery

Total Petroleum Hydrocarbons (TPH) are a major environmental pollutant, posing serious risks to soil health and ecosystems. TPH contamination, often resulting from crude oil spills and industrial activities, significantly disrupts soil structure, reduces fertility, and hinders the growth of plants and soil-dwelling organisms. In the environment, TPH compounds persist due to their hydrophobic nature, leading to long-term ecological damage. They can infiltrate groundwater, compromising its purity and presenting health hazards to humans and wildlife. The existence of TPH in soil modifies the population of bacteria, reduces biodiversity, and impedes natural processes such as nutrient cycling. Effective bioremediation techniques, such as microbial degradation, are essential for mitigating the harmful impacts of TPH on soil and the broader environment. This study emphasizes the urgent need for sustainable remediation strategies to restore contaminated soils and protect ecological and human health. This study investigates the influence of environmental circumstances on bacteria employed for the remediation of soil polluted with crude oil, focusing on bacterial strains sourced from the Baiji refinery in Iraq. Microbial rehabilitation is an economical and environmentally sustainable method for decomposing hydrocarbons into simpler molecules, making it an effective method for soil bioremediation. The study monitored biodegradation over seven months, assessing the degradation efficiency of total petroleum hydrocarbons (TPH) using gas chromatography-mass spectrometry (GC-MS). Environmental factors, including temperature, moisture levels, and nutrient availability, were closely monitored to assess their impact on bacterial activity. Ideal moisture range for bacterial growth and hydrocarbon degradation is often cited as 40% to 60% of the soil's WHC. Too much water can reduce oxygen availability in the soil, inhibiting aerobic bacterial growth, while too little water can limit microbial metabolism. Temperature affects bacterial metabolism and the rate of hydrocarbon degradation. Most hydrocarbon-degrading bacteria thrive in mesophilic conditions. The ideal temperature range for TPH degradation by bacteria is generally between 25°C and 35°C. At temperatures below 15°C, microbial activity and degradation rates slow significantly, while temperatures above 40°C can inhibit bacterial growth or even kill the microbes. The results revealed that the moisture: 40%–60% of soil's water-holding capacity and temperature 25°C–35°C maintaining these conditions promotes the optimal breakdown of hydrocarbons in bioremediation efforts. The results revealed significant degradation of crude oil, with a reduction of 40 initial compounds in untreated samples to 25-35 compounds in treated samples. The biodegradation rates increased steadily over time, with a removal efficiency reaching 72.38% by the end of the experiment. Additionally, the study demonstrated that environmental conditions, particularly temperature and moisture, play a pivotal role in optimizing bacterial degradation activity. These findings underscore the potential of bacteria in bioremediation efforts and the necessity of optimal environmental conditions, such as controlled temperature, moisture content, and nutrient levels, are essential for maximizing the efficiency of crude oil degradation in contaminated soils.

Microbial Consortia in the Remediation of Single-Use Waste: The Case of Face Masks

This study presents the results of evaluating hydrocarbonoclastic consortia in the biodegradation of microplastics derived from single-use, triple-layered polypropylene face masks. The choice of this carbon source was driven by the need to address the increase in single-use waste generated during the recent SARS-CoV-2 pandemic, as the use of face masks was a mandatory protective measure. Two bubble column bioreactors were used, each containing hydrocarbonoclastic consortia sourced from the Port of Veracruz and the Gulf of Mexico. The biodegradation activity of these consortia was assessed by observing the physical appearance of microplastic samples under a stereoscope and a microscope, as well as by calculating the weight loss of polypropylene after 15 days. The results revealed that the consortium from the Gulf of Mexico, with a maturity of 1 year, showed a higher capacity for polypropylene biodegradation, achieving a 19.98% degradation rate. This consortium also demonstrated more stable kinetics during the experimentation period. In contrast, the younger consortium from the Port of Veracruz exhibited a lower biodegradation rate of 3.77% and variable growth kinetics. Hydrocarbonoclastic bacteria identified within the consortia included Pseudomonas aeruginosa, Enterococcus faecalis, and Vibrio parahaemolyticus, among others. The hydrocarbonoclastic consortia have the potential to biodegrade from various forms of plastic waste, including single-use face masks.

Magnesium oxide nanoparticle reinforced pumpkin-derived nanostructured cellulose scaffold for enhanced bone regeneration

Considering global surge in bone fracture prevalence, limitation in use of traditional healing approaches like bone grafts highlights the need for innovative regenerative strategies. Here, a novel green fabrication approach has reported for reinforcement of physicochemical performances of sustainable bioinspired extracellular matrix (ECM) based on decellularized pumpkin tissue coated with Magnesium oxide nanoparticles (hereafter called DM-Pumpkin) for enhanced bone regeneration. Compared to uncoated scaffold, DM-Pumpkin exhibited significantly improved surface roughness, mechanical stiffness, porosity, hydrophilicity, swelling, and biodegradation rate. Obtained nanoporous structure provides an ideal three-dimensional microenvironment for the attachment, migration and osteo-induction in human adipose-derived mesenchymal stem cells (h- AdMSCs). Calcium deposition and mineralization, alkaline phosphatase activity, and SEM imaging of the cells as well as increased expression of bone-related genes after 21 days incubation confirmed capability of DM-Pumpkin in mimicking the biological properties of bone tissue. The presence of MgONPs had a silencing effect on inflammatory factors and improved wound closure, verified by in vivo studies. Increased expression of collagen type I and osteocalcin in the h- AdMSCs cultured on DM-Pumpkin compared to control further corroborated gained results. Altogether, boosting physicochemical and biological properties of DM-Pumpkin due to surface modification is a promising approach for guided bone regeneration.

Mechanical deviation in 3D-Printed PLA bone scaffolds during biodegradation

Large or carcinogenic bone defects may require a challenging bone tissue scaffold design ensuring a proper mechanobiological setting. Porosity and biodegradation rate are the key parameters controlling the bone-remodeling process. PLA presents a great potential for geometrically flexible 3-D scaffold design. This study aims to investigate the mechanical variation throughout the biodegradation process for lattice-type PLA scaffolds using both experimental observations and simulations. Three different unit-cell geometries are used for creating the scaffolds: basic cube (BC), body-centered structure (BCS), and body-centered cube (BCC). Three different porosity ratios, 50 %, 62.5 %, and 75 %, are assigned to all three structures by altering their strut dimensions. 3-D printed scaffolds are soaked in PBS solution at 37 °C for 15, 30, 60, 90, and 120 days both unloaded and under dead load. Water absorption, weight loss, and compression stiffness are measured to characterize the first-stage degradation and investigate the possible influences of these parameters on the whole biodegradation process. The strength reduction stage of biodegradation is simulated by solving pseudo-first-order kinetics-based molecular weight change equation using FEA with equisized cubic (voxel-like) elements.For the first stage, mechanical load does not have a statistically significant effect on biodegradation. BCC with 62.5 % porosity shows a maximum water absorption rate of around 25 % by the 60th day which brings an advantage in creating an aquatic environment for cell growth. Results indicate a significant water deposition inside almost all scaffolds and water content is determined to be the main reason for the retained or increased compression stiffness. A distinguishable stiffness increase in the initial degradation process occurs for 75 % porous BC and 50 % porous BCC scaffolds. Following the quasi-stable stage of biodegradation, almost all scaffolds lost their rigidity by around 44–48 % within 120 days based on numerical results. Therefore, initial stiffness increase in the quasi-stable stage of biodegradation can be advantageous and BCC geometry with a porosity between 50% and 62 % is the optimum solution for the whole biodegradation process.

Crystalline iron oxide mineral (magnetite) accelerates methane production from petroleum hydrocarbon biodegradation

Methane (CH4) emissions are a factor in climate change; in addition, CH4 production may affect reclamation of fluid fine tailings (FFT) in tailings ponds, and end-pit lakes (EPLs). In laboratory cultures, we investigated the effect of crystalline iron mineral (magnetite) on CH4 production from the biodegradation of hydrocarbons added to FFT collected from methanogenically more and less active sites in a demonstration EPL. Magnetite enhanced CH4 production from both sites, having a greater effect in more active FFT, where it increased the CH4 production rate as much as 48% (from 6.67 μmol d−1 to 9.87 μmol d−1) compared to FFT without magnetite. Correspondingly, magnetite hastened biodegradation of hydrocarbons (monoaromatics, n-alkanes and iso-alkanes), with a pronounced effect on o-xylene, ethylbenzene, m/p-xylenes, n-octane, n-nonane, and 2-methyloctane, where biodegradation rates increased by 46, 117, 11, 45, 28 and 37%, respectively, compared to FFT without magnetite. Little FeII was produced, suggesting that magnetite is not being used as an electron acceptor but rather functions as a conduit for electron transfer. Thus, magnetite may be a suitable amendment to enhance bioremediation of anaerobic environments contaminated with hydrocarbons. Importantly, our observations imply that magnetite may increase CH4 emissions from terrestrial ecosystems, thus affecting carbon budget estimations.

Sustainable wood composite production using cotton waste and exopolysaccharides as green binders

Burning agricultural waste is a common practice among farmers in many countries, leading to global warming and climate change. Upcycling abundant agricultural waste will prevent incineration-generated hazards and provide sustainable and eco-friendly wood. An alternative wood composite was prepared using Aspergillus niger mycelium and exopolysaccharides (EPS) as a green binder. Autoclaving and gamma irradiation were both tested as wood pre-treatment to enhance binding. The mixture was incubated at 30 °C for 1 week. The results showed that wet pre-treatment using autoclaving resulted in improved wood binding compared to dry gamma irradiation treatment. The results show that the composite with the lowest water absorption was autoclaved before inoculation with 25 % EPS-induced Aspergillus niger, its tensile strength was 2.01 MPa and Modulus of elasticity of 1240.42 MPa and water resistance duration of 72 h. The biodegradation rate was 21.5 % for linseed oil-coated composite compared to 15.63 % for non-coated wood after 6 weeks. The samples demonstrated thermal conductivity as low as 0.06025 W/mK and linear Ohmic behavior within the investigated voltage range, rendering it a competitive insulating material. In conclusion, autoclaving and inoculum size play a key role in binding cotton wood waste. The key results render the optimized composite suitable for industrial applications due to its affordability, green manufacturing process, and potential for large-scale production.