Rate Capability Research Articles

Mesoporous Mn-substituted MnxZn1-xCo2O4 ternary spinel microspheres with enhanced electrochemical performance for supercapacitor applications.

Extensive investigations have been carried out on spinel mixed transition metal oxide-based materials for high-performance electrochemical energy storage applications. In this study, mesoporous Mn-substituted MnxZn1-xCo2O4 (ZMC) ternary oxide microspheres (x = 0, 0.3, 0.5, 0.7, and 1) were fabricated as electrode materials for supercapacitors through a facile coprecipitation method. Electron microscopy analysis revealed the formation of microspheres comprising interconnected aggregates of nanoparticles. Furthermore, the substitution of Mn into ZnCo2O4 significantly improved the surface area of the synthesized samples. The electrochemical test results demonstrate that the ZMC3 oxide microspheres with an optimal Mn substitution exhibited enhanced performance, displaying the largest specific capacitance of 589.9Fg-1 at 1Ag-1. Additionally, the ZMC3 electrode maintained a capacitance retention of 92.1% after 1000 cycles and exhibited a significant rate capability at a current density of 10Ag-1. This improved performance can be ascribed to the synergistic effects of multiple metals resulting from Mn substitution, along with an increase in the surface area, which tailors the redox behavior of ZnCo2O4 (ZC) and facilitates charge transfer. These findings indicate that the incorporation of Mn into mixed transition metal oxides holds promise as an effective strategy for designing high-performance electrodes for energy storage applications.

Tailoring Practical Solid Electrolyte Composites Containing Ferroelectric Ceramic Nanofibers and All-Trans Block Copolymers for All-Solid-State Lithium Metal Batteries.

Ion transport efficiency, the key to determining the cycling stability and rate capability of all-solid-state lithium metal batteries (ASSLMBs), is constrained by ionic conductivity and Li+-migration ability across the multicomponent phases and interfaces in ASSLMBs. Here, we report a robust strategy for the large-scale fabrication of a practical solid electrolyte composite with high-throughput linear Li+-transport channels by compositing an all-trans block copolymer PVDF-b-PTFE matrix with ferroelectric BaTiO3-TiO2 nanofiber films. The electrolyte shows a sustainable electromechanical-coupled deformability that enables the rapid dissociation of anions with Li+ to create more movable Li+ ions and spontaneously transform the battery internal strain into Li+-ion migration kinetic energy. The ceramic framework homogenizes the interfacial potential with electrodes, endowing the electrolyte with a high conductivity of 0.782 mS·cm-1 and stable ion transport ability in ASSLMBs at room temperature. The batteries of LiFePO4/Li can stably cycle 1000 times at 0.5 C with a high capacity retention of 96.1%, and Ah-grade pouch or high-voltage Li(Ni0.8Mn0.1Co0.1)O2/Li batteries also exhibit excellent rate capability and cycling performance.

High-Performance Anode Material Based on Zinc Naphthalocyanine/Graphene Composite.

Transition metal oxides are a potential anode material owing to their high theoretical capacity. Nonetheless, their large volume changes and low electrical conductivities lead to poor cycling performance and rate capabilities. In this article, an effective strategy is proposed and developed for preparing a ZnO/N-doped graphene composite (ZnNc/GO-5). The key point of this strategy is to use zinc tetra tert-butyl-naphthalocyanine (ZnNc) as a codoped source of N atoms and zinc ions, and graphene oxide (GO) which is combined with ZnNc by π-π deposition as a carbon matrix. After calcination, ZnO microcrystals coated with N-doped graphene are obtained. The unique features of the composite and synergistic effect between N-doped reduced graphene oxide and ZnO microcrystals enable good electrochemical performance by the composites when used in lithium-ion batteries. As an anode material, the as-synthesized ZnNc/GO-5 composite delivers a high first capacity of 1942.9 mAh g-1 and excellent cyclic stability of 861.4 mAh g-1 after 150 cycles at 100 mA g-1. This strategy may offer a new method of designing the anode materials of lithium-ion batteries and promote the practical use of organic molecules in next-generation lithium-ion batteries.

Crafting high‐performance polymer‐integrated solid electrolyte for solid state sodium ion batteries

AbstractThe development of modern solid‐state batteries with high energy density has provided the reliable and durable solution needed for over‐the‐air network connectivity devices. In this study, a NASICON‐type Na3Zr2Si2PO12 (NZSP) ceramic filler was prepared using the sol‐gel method and then a polymer‐integrated solid electrolyte consisting of polyethylene oxide (PEO), NZSP, and sodium perborate (SPB) was prepared by Stokes' solution casting process. Through physico‐chemical and electrochemical characterization techniques, the morphology, electrochemical, and thermal properties of the prepared solid electrolyte sample were carefully studied. The PEO/NZSP/SPB electrolyte developed for all‐solid‐state sodium‐ion batteries (ASSSBs) exhibited a strong ionic conductivity, a large window for electrochemical stability, and was effective in controlling the growth of sodium dendrites. Furthermore, the polymer‐integrated solid electrolyte showed impressive rate capability, high discharge capacity (73.2 mAh g−1) at 0.1 mA cm−2, and good faradaic efficiency (98%) even after 100 cycles. These results reveal that the PEO/NZSP/SPB electrolyte is a potential and inevitable candidate for the evolution of high‐performance rechargeable ASSSBs.

Industrial-scale Hard Carbon Designed to Regulate Electrochemical Polarization for Fast Sodium Storage.

Given the merits of abundant resource, low cost and high electrochemical activity, hard carbons have been regarded as one of the most commercializable anode material for sodium-ion batteries (SIBs). However, poor rate capability is one of the main obstacles that severely hinder its further development. In addition, the relationships between preparation method, material structure and electrochemical performance have not been clearly elaborated. Herein, a simple but effective strategy is proposed to accurately construct the multiple structural features in hard carbon via adjusting the components of precursors. Through detailed physical characterization of the hard carbons derived from different regulation steps, and further combined with in-situ Raman and galvanostatic intermittent titration technique (GITT) analysis, the network of multiple relationships between preparation method, microstructure, sodium storage behavior and electrochemical performance have been successfully established. Simultaneously, exceptional rate capability about 108.8 mAh g-1 at 8 A g-1 have been achieved from RHC sample with high reversible capacity and desirable initial Coulombic efficiency (ICE). Additionally, the practical applications can be extended to cylindrical batterywith excellent cycle behaviors. Such facile approach can provide guidance for large-scale production of high-performance hard carbons and provides the possibility of building practical SIBs with high energy density and durability.

Diversifying Ion-Transport Pathways of Composite Solid Electrolytes for High-Performance Solid-State Lithium-Metal Batteries.

The application of composite solid electrolytes (CSEs) in solid-state lithium-metal batteries is limited by the unsatisfactory ionic conductivity underpinned by the low concentration of free lithium ions. Herein, we propose an interface design strategy where an amine silane linker is employed as a coupling agent to graft the Li7La3Zr2O12 (LLZO) ceramic nanofibers to the poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) polymer matrix to enhance their interaction. The hydrogen bonding between amino-functionalized LLZO (NH2@LLZO) and PVDF-HFP not only effectively induces a uniform incorporation of high-content nanofibers (50 wt %) into the polymer matrix but also furnishes sufficient continuous surfaces to weaken the complexation between PVDF-HFP and Li-ion carriers. Additionally, introduction of the hydrogen bond and Lewis acid-base interplay strengthens the interfacial interactions between NH2@LLZO and lithium salts that release more free lithium ions for efficient interfacial transport. The impact of the linker's structure on the dissociation capacity of lithium salts is systematically studied from the steric effect perspective, which affords insights into interface design. Conclusively, the composite solid electrolyte achieves a high ionic conductivity (5.8 × 10-4 S cm-1) by synergy of multiple transport channels at ceramic, polymer, and their interface, which effectively regulates the lithium deposition behavior in symmetric cells. The excellent compatibility of the electrolyte with both LiFePO4 and LiNi0.8Co0.1Mn0.1O2 cathodes also results in a long lifetime and a high rate capability for full cells.

Insights to Oxygen Vacancy Engineering of TiO2 Anode for Sodium‐Ion Batteries

Rational construction of oxygen vacancies in electrode materials can effectively enhance the comprehensive sodium storage performance of the material. However, how to precisely control and regulate the oxygen vacancies concentration remains to be investigated, and the impact on electrochemical performance is still unclear. Herein, TiO2 nanoparticles with tunable oxygen vacancies concentrations are used as research models, which were fabricated through a simple and effective plasma method. The experimental results reveal that a moderate concentration of oxygen vacancies can significantly improve the electrochemical kinetics and charge conductivity of the TiO2 electrodes. In addition, oxygen vacancies promote the release of fluorine from the fluoroethylene carbonate (FEC) in the electrolyte, inducing a NaF‐rich solid electrolyte interphase, thus ensuring interfacial stability and inhibiting excessive electrolyte decomposition. Consequently, the well‐designed anode exhibits outstanding rate capability (147 mAh g‐1 at 5 A g1) and extremely stable cycling performance (nearly 100%, 3000 cycles). This work provides a feasible method for realizing defect concentration modulation in energy storage materials and offers new insights into interfacial chemistry for improving battery performance.

Enhanced Electrochemical Performance of Disordered Rocksalt Cathodes in a Localized High‐Concentration Electrolyte

Enhanced Electrochemical Performance of Disordered Rocksalt Cathodes in a Localized High‐Concentration Electrolyte

Nanostructured binary transition-metal-sulfides and nanocomposites as high-performance electrodes for hybrid supercapacitors

Supercapacitors (SCs) are attractive as promising energy storage devices because of their distinctive attributes, such as high power density, good current charge/discharge ability, excellent cyclic stability, reasonable safety, and low cost. Electrode materials play key roles in achieving excellent performance of these SCs. Among them, binary transition metal sulfides (BTMSs) have received significant attention, attributed to their high conductivity, abundant active sites, and excellent electrochemical properties. This topic review aims to summarize recent advances in principles, design, and evaluation of the electrochemical performance for nanostructured BTMSs (including nickel–cobalt sulfides, zinc–cobalt sulfides, and copper–cobalt sulfides.) and their nanocomposites (including those carbon nanomaterials, transition metal oxides, binary transition metal oxides, transition metal sulfides, and polymers). Nanostructuring of these BTMSs and nanocomposites as well as their effects on the performance were discussed, including nanoparticles, nanospheres, nanosheets, nanowires, nanorods, nanotubes, nanoarrays, and hierarchitectured nanostructures. Their electrochemical performance has further been reviewed including specific capacitance, conductivity, rate capability, and cycling stability. In addition, the performance of hybrid supercapacitors (HSCs) assembled using the nanostructured BTMSs as the cathodes also have been summarized and compared. Finally, challenges and further prospects in the HSCs-based BTMS electrodes are presented.

Coordination Defect‐Induced Lewis Pairs in Metal−Organic Frameworks Boosted Sulfur Kinetics for Bifunctional Photo‐Assisted Li−S Batteries

AbstractThe photo‐assisted strategy is regarded as a crucial approach to enhance the conversion kinetics of polysulfides in lithium–sulfur (Li–S) batteries. However, the development of photo‐assisted Li–S batteries still faces important challenges, such as the rapid recombination of photogenerated electron−holes on cathode and more severe shuttle effect. Herein, a breakthrough in overcoming the challenges has been made by constructing a promising photo‐assisted Li−S battery based on semiconducted metal−organic frameworks. During the discharging progress, the photoexcited electrons generated by H2BPDC ligand based on ligand‐to‐metal charge transfer (LMCT) effect, are injected into the Ti‐oxo clusters in Ti‐MOF, thereby facilitating the sulfur reduction to Li2S. And photoexcited holes are capable of promoting the decomposition kinetics of Li2S during charging. More importantly, the stronger chemical interaction between Ti‐BPDC‐d and polysulfides under light inhibits the polysulfides dissolution and shuttling, which fundamentally addresses the issue of light‐accelerated shuttling. As a result, the photo‐assisted Li–S batteries deliver a reversible capability of 1090.21 mAh g−1 at 0.2 C with a capacity retention of 82.91% over 150 cycles, and a superior rate capability of 673.58 mAh g−1 at 5 C. The findings are promising in advancing the design principles for photo‐rechargeable Li−S batteries.

Mohs micrographic surgery in immunosuppressed vs immunocompetent patients: Results of a prospective nationwide cohort study (REGESMOHS, Spanish registry of Mohs surgery).

Immunosuppressed (IS) patients, particularly solid organ transplant recipients and those on immunosuppressive therapy, face a higher incidence and recurrence of nonmelanoma skin cancers (NMSC), including basal cell carcinoma (BCC) and squamous cell carcinoma (SCC). Mohs micrographic surgery (MMS) is the preferred treatment for high-risk NMSC due to its high cure rate and margin examination capabilities. However, IS patients may experience more complications, such as surgical site infections, and a greater risk of recurrence, making their outcomes a subject of interest. This study aimed to compare IS and immunocompetent (IC) patients undergoing MMS for NMSC in terms of baseline characteristics, intra- and post-surgical complications, and postoperative recurrence rates. The study utilized data from the REGESMOHS registry, a 7-year prospective cohort study in Spain. It included 5226 patients, categorizing them into IC (5069) and IS (157) groups. IS patients included solid organ transplant recipients, those on immunosuppressive treatments, individuals with haematological tumours and HIV-positive patients. Patient data, tumour characteristics, surgical details and outcomes were collected and analysed. IS patients demonstrated a higher proportion of SCC, multiple synchronous tumours and tumours invading deeper structures. Complex closures, unfinished MMS and more surgical sections were observed in the IS group. Although intra-operative morbidity was higher among IS patients, this difference became non-significant when adjusted for other variables such as year of surgery, antiplatelet/anticoagulant treatment or type of closure. Importantly, IS patients had a substantially higher recurrence rate (IRR 2.79) compared to IC patients. This study suggests that IS patients may be at a higher risk of development of AE such as bleeding or tumour necrosis and are at a higher risk of tumour recurrence. Close follow-up and consideration of the specific characteristics of NMSC in IS patients are crucial. Further research with extended follow-up is needed to better understand the long-term outcomes for this patient group.

Vacancy-Defect Ternary Topological Insulators Bi2Se2Te Encapsulated in Mesoporous Carbon Spheres for High Performance Sodium Ion Batteries and Hybrid Capacitors.

Ternary topological insulators have attracted worldwide attention because of their broad application prospects in fields such as magnetism, optics, electronics, and quantum computing. However, their potential and electrochemical mechanisms in sodium ion batteries (SIBs) and hybrid capacitors (SIHCs) have not been fully studied. Herein, a composite material comprising vacancy-defects ternary topological insulator Bi2Se2Te encapsulated in mesoporous carbon spheres (Bi2Se2Te@C) is designed. Bi2Se2Te with ample vacancy-defects has a wide interlayer spacing to enable frequent insertion/extraction of Na+ and boost reaction kinetics within the electrode. Meanwhile, the Bi2Se2Te@C with optimized yolk-shell structure can buffer the volume variation without breaking the outer protective carbon shell, ensuring structural stability and integrity. As expected, the Bi2Se2Te@C electrode delivers high reversible capacity and excellent rate capability in half SIB cells. Various electrochemical analyses and theoretical calculations manifest that Bi2Se2Te@C anode confirms the synergistic effect of ternary chalcogenide systems and suitable void space yolk-shell structure. Consequently, the full cells of SIB and SIHC coupled with Bi2Se2Te@C anode exhibit good performance and high energy/power density, indicating its widespread practical applications. This design is expected to offer a reliable strategy for further exploring advanced topological insulators in Na+-based storage systems.

Optimizing Structural Patterns for 3D Electrodes in Lithium-Ion Batteries for Enhanced Fast-Charging Capability and Reduced Lithium Plating

The most common pattern types for anode structuring, in particular the line, grid, and hexagonal-arranged hole pattern were evaluated in a comparable setup in full-cells and symmetrical cells. The cells with structured electrodes were compared to reference cells with unstructured anodes of similar areal capacity (4.3 mAh cm−2) and the onset of lithium plating during fast-charging was determined in situ by differential voltage analysis of the voltage relaxation and ex situ by post-mortem analysis. Furthermore, electrochemical impedance spectroscopy measurements on symmetrical cells were used to determine the ionic resistance of structured and unstructured electrodes of similar areal capacity. All cells with structured electrodes showed lower ionic resistances and an onset of lithium plating shifted to higher C-rates compared to cells with unstructured electrodes. The structure patterns with capillary structures, i.e., lines and grids, showed significant reduced lithium plating during fast-charging and a higher rate capability compared to reference cells with unstructured electrodes and cells with hole structured electrodes. The continuous rewetting of the electrode with liquid electrolyte by capillary forces and the reduced ionic resistance of the 3D electrode are identified as key factors in improving overall battery performance. The data of the studied cells were used to calculate the resulting energy and power densities of prospective commercial pouch cells and potential pitfalls in the comparison to cells with unstructured electrodes were identified.

3D-engineered WO3 microspheres assembled by 2D nanosheets with superior sodium storage capacity.

Because of the inadequate sodium storage capacity of graphite, the exploration of high-performance SIB anodes is a crucial step forward. Herein, we report the hydrothermally synthesized self-assembled interconnected nanosheets of WO3 microspheres possessing admirable sodium storage in terms of cycling stability and acceptable rate capability. Benefitting from the interconnected nature of the nanosheets with a hollow interior, the WO3 microspheres exhibited a high sodiation capacity of 431 mA h g-1 at 100 mA g-1 and an excellent rate performance of 60 mA h g-1 at 500 mA g-1 with an impressive coulombic efficiency of around 99%. Importantly, even after continuous cycling with increasing current densities, a specific capacity as high as 220 mA h g-1 could be recovered at a current density of 50 mA g-1, suggesting excellent sodium storage reversibility.

Multiple phase transformation of ZIF-L to LDH and Ag nanoparticles decorated on CoNi layered double hydroxides for high-performance supercapacitor and highly efficient hydrogen evolution reaction

ZIF-L-derived binary layered double hydroxide (LDH) established active catalysts have been shown to have potential as electrode materials in the development of high-performance supercapacitors (SCs) and hydrogen evaluation reactions (HER). This study uses conductive nano-silver (Ag) particles in hierarchically integrated CoNi-LDH nanosheets (NSs), which are described. The developed Ag@CoNi-LDH NSs electrode has a very high specific capacitance of 2878 F g−1 at 0.5 A g−1 and an impressive rate capability. This is due to consistent morphology, plentiful electroactive sites, homogeneous particle size, and decreased electronic/ionic impedance. The fabrication of solid-state hybrid supercapacitors (HSCs) using Ag@CoNi-LDH NSs as the positive electrode and activated carbon (AC) as the negative electrode in PVA/KOH polymer gel electrolytes has been described. The prepared supercapacitors achieve a maximum energy density of 105 Wh kg−1 at power densities of 1183 Wh kg−1, coupled with excellent initial capacitance retentions of 97 % after 20,000 cycles. Ag@CoNi-LDH NSs demonstrate effective electrocatalytic activity towards HER with an ultra-low overpotential of 26 mV at 10 mA cm−2 and the associated Tafel value of 35 mV dec−1 using 0.5 M acidic electrolyte. It is possible to attribute the extraordinary electrochemical performance to the thoughtful mixture of two electroactive materials in the future.

Enhancing the electrochemical properties of TiNb2O7 anodes with SP-CNT binary conductive agents for both liquid and solid state lithium ion batteries.

A high performance oxide composite electrode is obtained with a two-step solid state calcined titanium niobium oxide TiNb2O7 (TNO) anode and super P-carbon nanotube (SP-CNT) binary conductive agents. The solid state synthesized TNO-0.2C (the proportion of CNTs in the binary conductive agent is 20% wt) anode exhibits a high reversible discharge capacity of 278.6 mA h g-1 at 0.5C, a competitive rate capability with reported works that employed wet chemical methods at moderate rates (178.1 mA h g-1 at 10C), and an excellent capacity retention of 92.2% after 200 cycles at 1.5C/1.5C. The enhancement in electrochemical properties of the TNO-0.2C anode is mainly attributed to the combination of the short range and long range conductive agents in the SP-CNT binary conductive system, which guarantees an efficient electronic conductive network. The Li|Li1.3Al0.3Ti1.7(PO4)3 composite polymer electrolyte (LATPCPEs)|TNO-0.2C solid state batteries are also assembled, which deliver a high initial reversible discharge capacity of 241.3 mA h g-1 at 1C and a good capacity retention rate of 93% after 50 cycles. This work provides an efficient way to improve the electrochemical properties of TNO anodes in lithium ion batteries, especially for solid state batteries.

Manipulating Local Chemistry and Coherent Structures for High-Rate and Long-Life Sodium-Ion Battery Cathodes.

Layered sodium transition-metal (TM) oxides generally suffer from severe capacity decay and poor rate performance during cycling, especially at a high state of charge (SoC). Herein, an insight into failure mechanisms within high-voltage layered cathodes is unveiled, while a two-in-one tactic of charge localization and coherent structures is devised to improve structural integrity and Na+ transport kinetics, elucidated by density functional theory calculations. Elevated Jahn-Teller [Mn3+O6] concentration on the particle surface during sodiation, coupled with intense interlayer repulsion and adverse oxygen instability, leads to irreversible damage to the near-surface structure, as demonstrated by X-ray absorption spectroscopy and in situ characterization techniques. It is further validated that the structural skeleton is substantially strengthened through the electronic structure modulation surrounding oxygen. Furthermore, optimized Na+ diffusion is effectively attainable via regulating intergrown structures, successfully achieved by the Zn2+ inducer. Greatly, good redox reversibility with an initial Coulombic efficiency of 92.6%, impressive rate capability (86.5 mAh g-1 with 70.4% retention at 10C), and enhanced cycling stability (71.6% retention after 300 cycles at 5C) are exhibited in the P2/O3 biphasic cathode. It is believed that a profound comprehension of layered oxides will herald fresh perspectives to develop high-voltage cathode materials for sodium-ion batteries.

Layer‑by‑layer assembled binder-free hydrated vanadium oxide-acetylene black electrode for flexible aqueous zinc ion battery

Vanadium oxides are potential positive electrode materials for aqueous zinc ion batteries (ZIBs) owing to their advantages of high theoretical capacity, low cost, and so on. Developments of methods for preparing binder-free vanadium oxide electrodes on a large scale and further investigation of their Zn2+ storage mechanisms are essential for expanding their uses in large-scale energy storage systems and wearable electronics. In this work, binder-free electrodes with hydrated vanadium oxide (V2O5·nH2O, denoted as VOH)-acetylene black (AB) on carbon cloth (VOH-AB/CC) are fabricated by a simple and scalable method which combined low-temperature hydrothermal treatment with layer-by-layer drop/spray-coating process. The AB can greatly improve the electrical conductivity of VOH, thereby enhancing the electrochemical performance. The as-prepared electrode with 20 wt% of AB (VOH-AB2/CC) delivers a high capacity of 280 mA h g−1 at 1 A/g and a good rate capability of 205 mA h g−1 at 4 A/g, which is better than many of the reported binder-free vanadium base electrodes. Besides, excellent cycling performance with 89 % retention rate after 3000 cycles at 4 A/g is achieved on the VOH-AB2/CC electrode. Furthermore, a storage mechanism of Zn2+/H+/H2O insertion accompanied by the formation of basic zinc salt precipitate during the discharging process is proposed by the aid of ex-situ XRD and XPS techniques. Additionally, the flexible Quasi-Solid-State ZIB constructed using VOH-AB/CC as positive electrode can work well at different bending states and two ZIBs connected in series can lighten a light-emitting diode even under bending state. This work provides a low-cost, time-saving, environmental-friendly and scalable method to fabricate binder-free hydrated vanadium oxide electrodes for flexible aqueous ZIBs.

Superfast Zincophilic Ion Conductor Enables Rapid Interfacial Desolvation Kinetics for Low‐Temperature Zinc Metal Batteries

AbstractLow‐temperature rechargeable aqueous zinc metal batteries (AZMBs) as highly promising candidates for energy storage are largely hindered by huge desolvation energy barriers and depressive Zn2+ migration kinetics. In this work, a superfast zincophilic ion conductor of layered zinc silicate nanosheet (LZS) is constructed on a metallic Zn surface, as an artificial layer and ion diffusion accelerator. The experimental and simulation results reveal the zincophilic ability and layer structure of LZS not only promote the desolvation kinetics of [Zn(H2O)6]2+ but also accelerate the Zn2+ transport kinetics across the anode/electrolyte interface, guiding uniform Zn deposition. Benefiting from these features, the LZS‐modified Zn anodes showcase long‐time stability (over 3300 h) and high Coulombic efficiency with ≈99.8% at 2 mA cm−2, respectively. Even reducing the environment temperature down to 0 °C, ultralong cycling stability up to 3600 h and a distinguished rate performance are realized. Consequently, the assembled Zn@LZS//V2O5‐x full cells deliver superior cyclic stability (344.5 mAh g−1 after 200 cycles at 1 A g−1) and rate capability (285.3 mAh g−1 at 10 A g−1) together with a low self‐discharge rate, highlighting the bright future of low‐temperature AZMBs.

Mixed polyanionic NaFe1.6V0.4(PO4)(SO4)2@CNT cathode for sodium-ion batteries: Electrochemical diffusion kinetics and distribution of relaxation time analysis at different temperatures

We report the electrochemical sodium-ion kinetics and distribution of relaxation time (DRT) analysis of a newly designed mixed polyanionic NaFe1.6V0.4(PO4)(SO4)2@CNT composite as a cathode. The specific capacity of 104 mAhg−1 is observed at 0.1 C with the average working voltage of ∼3 V. Intriguingly, a remarkable rate capability and reversibility are demonstrated up to very high current rate of 25 C. The long cycling test up to 10 C shows high capacity retention even after 2000 cycles. The detailed analysis of galvanostatic intermittent titration technique (GITT) and cyclic voltammetry (CV) data reveal the diffusion coefficient of 10−8–10−11 cm2s−1. We find excellent stability in the thermal testing between 25–55 °C temperatures and 80% capacity retention up to 100 cycles at 5 C. Further, we analyze the individual electrochemical processes in the time domain using the novel DRT technique at different temperatures. The ex-situ investigation shows the stable and reversible structure, morphology and electronic states of the long cycled cathode material. More importantly, we demonstrate relatively high specific energy of ≈155 Wh kg−1 (considering the total active material loading of both the electrodes) at 0.2 C for full cell battery having excellent rate capability up to 10 C and long cyclic stability at 1 C.